As of commit 5052de8def, QCOM_SMD_RPM and various other config
options enabled in the qcom_defconfig depends on the RPMSG. If
QCOM_SMD_RPM config option is not selected it disables the
REGULATOR_QCOM_SMD_RPM and other essential config options.
Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Use 'clock-frequency' binding for the i2c node that will put the I2C driver
into the standard operating mode. 'speed-mode' was not a valid binding for
the I2C driver, remove it.
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add DT alias for the second ethernet present on mainboard rev 1.10.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Drop the LED node from VINing FPGA DT because the LED wiring is
different on each mainboard revision. This wiring is therefore
handled in mainboard DT Overlays.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Remove the EEPROMs attached to the I2C expander ports which
lead to the backplane slots from the main VIN|ING DTS file.
These EEPROMs are bound using separate DTO files, which lets
us handle both two-slot and six-slot configuration of the
backplane.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The ethernet block clock phandle must point to the clock node which
represents the clock which directly supply the ethernet block. This
is emac_x_clk , not emacx_clk , so fix this.
From: Pavel Machek <pavel@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
- Increase number of available GPIOs in Kconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TjSS
-----END PGP SIGNATURE-----
Merge tag 'socfpga_updates_for_v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/soc
Pull "SoCFPGA updates for v4.13" from Dinh Nguyen:
- Increase number of available GPIOs in Kconfig
* tag 'socfpga_updates_for_v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: Increase max number of GPIOs
- cpu operating points renaming from Viresh
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QBWb
-----END PGP SIGNATURE-----
Merge tag 'pxa-dt-4.13' of https://github.com/rjarzmik/linux into next/dt
Pull "pxa-dt for v4.13" from Robert Jarzmik:
This device-tree pxa update brings :
- cpu operating points renaming from Viresh
* tag 'pxa-dt-4.13' of https://github.com/rjarzmik/linux:
ARM: pxa: Use - instead of @ for DT OPP entries
1. Add needed property for CEC on Odroid U3,
2. Fix reset GPIO polarity on Rinato.
-----BEGIN PGP SIGNATURE-----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=iCaB
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DeviceTree update for v4.13, part two" from Krzysztof Kozłowski:
1. Add needed property for CEC on Odroid U3,
2. Fix reset GPIO polarity on Rinato.
* tag 'samsung-dt-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Fix polarity of panel reset gpio in Rinato
ARM: dts: exynos: add needs-hpd to &hdmicec for Odroid-U3
1. Remove old Kconfig options from all ARM configs,
2. Update Samsung defconfigs to bring back options over time got disabled
for some reason (configs were not updated along with the code),
3. Save defconfigs for Samsung.
-----BEGIN PGP SIGNATURE-----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=uKGf
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Pull "ARM defconfig cleanup" from Krzysztof Kozłowski:
1. Remove old Kconfig options from all ARM configs,
2. Update Samsung defconfigs to bring back options over time got disabled
for some reason (configs were not updated along with the code),
3. Save defconfigs for Samsung.
* tag 'samsung-defconfig-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: tct_hammer_defconfig: Save defconfig
ARM: s5pv210_defconfig: Save defconfig
ARM: s3c6400_defconfig: Save defconfig
ARM: mini2440_defconfig: Save defconfig
ARM: s3c2410_defconfig: Save defconfig
ARM: exynos_defconfig: Save defconfig
ARM: s5pv210_defconfig: Bring back lost (but wanted) options
ARM: s3c6400_defconfig: Bring back lost (but wanted) options
ARM: s3c2410_defconfig: Bring back lost (but wanted) options
ARM: tct_hammer_defconfig: Bring back lost (but wanted) options
ARM: mini2440_defconfig: Bring back lost (but wanted) options
ARM: defconfig: samsung: Re-order entries to match savedefconfig
ARM: defconfig: Cleanup from old Kconfig options
Currently external aborts are unsupported by the guest abort
handling. Add handling for SEAs so that the host kernel reports
SEAs which occur in the guest kernel.
When an SEA occurs in the guest kernel, the guest exits and is
routed to kvm_handle_guest_abort(). Prior to this patch, a print
message of an unsupported FSC would be printed and nothing else
would happen. With this patch, the code gets routed to the APEI
handling of SEAs in the host kernel to report the SEA information.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Originally, generated-y and genhdr-y had different meaning, like
follows:
- generated-y: generated headers (other than asm-generic wrappers)
- header-y : headers to be exported
- genhdr-y : generated headers to be exported (generated-y + header-y)
Since commit fcc8487d47 ("uapi: export all headers under uapi
directories"), headers under UAPI directories are all exported.
So, there is no more difference between generated-y and genhdr-y.
We see two users of genhdr-y, arch/{arm,x86}/include/uapi/asm/Kbuild.
They generate some headers in arch/{arm,x86}/include/generated/uapi/asm
directories, which are obviously exported.
Replace them with generated-y, and abolish genhdr-y.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Increase the maximum number of GPIOs on SoCFPGA as this platform
can have many GPIO controllers in the FPGA part.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
CRIU restores application mappings on the same place where they
were before Checkpoint. That means, that we need to move vDSO
and sigpage during restore on exactly the same place where
they were before C/R.
Make mremap() code update mm->context.{sigpage,vdso} pointers
during VMA move. Sigpage is used for landing after handling
a signal - if the pointer is not updated during moving, the
application might crash on any signal after mremap().
vDSO pointer on ARM32 is used only for setting auxv at this moment,
update it during mremap() in case of future usage.
Without those updates, current work of CRIU on ARM32 is not reliable.
Historically, we error Checkpointing if we find vDSO page on ARM32
and suggest user to disable CONFIG_VDSO.
But that's not correct - it goes from x86 where signal processing
is ended in vDSO blob. For arm32 it's sigpage, which is not disabled
with `CONFIG_VDSO=n'.
Looks like C/R was working by luck - because userspace on ARM32 at
this moment always sets SA_RESTORER.
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Conflicts:
kernel/sched/Makefile
Pick up the waitqueue related renames - it didn't get much feedback,
so it appears to be uncontroversial. Famous last words? ;-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recent change to use cpuhp_setup_state_cpuslocked() with commit
fe2a5cd8aa ("ARM/hw_breakpoint: Use cpuhp_setup_state_cpuslocked()")
missed to change the related paired cpuhp_remove_state_nocalls_cpuslocked().
Now if arch_hw_breakpoint_init() fails, we get "WARNING: possible recursive
locking detected" on the exit path.
Fixes: fe2a5cd8aa ("ARM/hw_breakpoint: Use cpuhp_setup_state_cpuslocked()")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-omap@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170616082238.15553-1-tony@atomide.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
ARM and x86 had duplicated versions of the dma_ops structure, the
only difference is that x86 hasn't wired up the set_dma_mask,
mmap, and get_sgtable ops yet. On x86 all of them are identical
to the generic version, so they aren't needed but harmless.
All the symbols used only for xen_swiotlb_dma_ops can now be marked
static as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit 94647a3012 ("ARM: dts: omap3-overo: Enable WiFi/BT combo")
while enabling WiFi/BT combo added regulator to trigger the nReset
signal of the Bluetooth module in vqmmc-supply. However BT should be
handled by UART. Moreover "vqmmc" is not a defined binding for
omap_hsmmc. While "vqmmc" in mmc2 hasn't caused any issues so far,
mmc2 will start to mis-behave once omap_hsmmc defines "vqmmc"
binding.
Remove "vqmmc-supply" property in mmc2 here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The external request lines are used by tusb6010 on OMAP24xx platforms.
Update the map so the driver can use dmaengine API to request the DMA
channel. At the same time add temporary map containing only the external
DMA request numbers for DT booted case on omap24xx since the tusb6010 stack
is not yet supports DT boot.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.
This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.
Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.
One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications. For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).
Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.
Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.
Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stream of fixes has slowed down, only a few this week:
- Some DT fixes for Allwinner platforms, and addition of a clock to
the R_CCU clock controller that had been missed.
- A couple of small DT fixes for am335x-sl50.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pi+d
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Stream of fixes has slowed down, only a few this week:
- Some DT fixes for Allwinner platforms, and addition of a clock to
the R_CCU clock controller that had been missed.
- A couple of small DT fixes for am335x-sl50"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
ARM: dts: am335x-sl50: Fix card detect pin for mmc1
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
Fix two compilation issues
-----BEGIN PGP SIGNATURE-----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=P9hB
-----END PGP SIGNATURE-----
Merge tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc
Bring in the fixes branch to avoid a merge conflict between new SoC options and
the build fix adding CONFIG_AMR_CPU_SUSPEND.
Fixes for 4.12:
Fix two compilation issues
* tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91: select CONFIG_ARM_CPU_SUSPEND
memory: atmel-ebi: mark PM ops as __maybe_unused
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable i.MX7 ADC driver support.
- Enable THERMAL_WRITABLE_TRIPS, so that i.MX thermal driver can set
trip points for testing.
- CONFIG_DEBUG_FS gets lost by accident because of a change around
CONFIG_RCU_TRACE. Re-enable it explicitly.
- Enable MXS LRADC driver and CONFIG_CGROUPS for mxs_defconfig.
- Enable more common cpufreq governors to help test cpufreq driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZRp9UAAoJEFBXWFqHsHzO/uQH/0LtqlmXKraEcYZS7EL+QNQZ
y2gm+/01IYP6Kw9e0jA5gGkTbfGUKRUDV9EtxSfRABrHsxtfB5wejsX6nKQ9AhCZ
taxSgzXG06TtMM1RxoYanKzGuEiNVfUovFYWUP5lEVdz36IDvmafiKJ+/l3J6hU5
YEFxcKqIrDK1370IjPHowoZsg8v5Bx8wyyavWOKpG/jbID7pWTunlIsGKCwF6aUl
xhf/VDiQpKzt27BixieXQsiPlisoXxKy0QZPzooDLwVzRVWB8xOcHa8GBbv7RcfA
HBtMKt+GM6RJByluAWfbv1ERNH3D2tg0gZEEoLAWK4t7VeS5qk1FeAhyj+4Y1EQ=
=jc6x
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
The i.MX defconfig updates for 4.13:
- Enable i.MX7 ADC driver support.
- Enable THERMAL_WRITABLE_TRIPS, so that i.MX thermal driver can set
trip points for testing.
- CONFIG_DEBUG_FS gets lost by accident because of a change around
CONFIG_RCU_TRACE. Re-enable it explicitly.
- Enable MXS LRADC driver and CONFIG_CGROUPS for mxs_defconfig.
- Enable more common cpufreq governors to help test cpufreq driver.
* tag 'imx-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC
ARM: imx_v6_v7_defconfig: Set THERMAL_WRITABLE_TRIPS=y for testing
ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
ARM: mxs_defconfig: Re-enable MXS LRADC
ARM: mxs_defconfig: Enable CONFIG_CGROUPS
ARM: imx_v6_v7_defconfig: Enable cpufreq governors
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
Board.
- A series from Alexandre Belloni to correct the vendor prefix for
rv4162 compatible.
- A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
imx7d-sdb board.
- Increase the SGTL5000 LRCLK pad strength to fix a random audio
channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
boards.
- Clean up non-existing property 'enable-active-low' from fixed
regulator device nodes.
- Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
though device drivers do not use the polarity for now.
- Add Wifi and Bluetooth support for imx7d-sdb board.
- Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
- Update zii-rdu2 device tree source to use #include "..." for local
inclusion.
- A series from Philipp Zabel and Steve Longerbeam to enable video
capture support for imx6qdl platforms.
- A number of small random updates on various board support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZRcZ+AAoJEFBXWFqHsHzOPrcIAKrIeegjnl29Fp6JA2u3xC3R
XRyi59ybxGLB/8FNdbKqWJS9cAgOuF61FgYIgSRTqxVobPtZTdGMicnbp+FTTRYa
AaXxeB+3YVH2PJxDB1f4ZrlcBMNo3cpSO4ECbtnBgxoupQXOKIBQbLbujbyjsnbP
d/XFCC6LQFlL7yH8+jQrjiUkk0HSzHpzq3Kt6Dzq7WqWsOghOqDfsV2PhqnKvNzL
V0iovP9u9rayWn7Ik+bg7GlOtdaBTf8i0/TN4LcpCiKSw3wh7Uz03E0Cd2WMIO3N
Qs9R2QQ/GS0zZOmBlpYBO2waw9Xy9ZnbX/5zJtnw29IBiVdmbSNA5Q0QJySxPtw=
=hxCr
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
The i.MX device tree updates for 4.13:
- New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
Board.
- A series from Alexandre Belloni to correct the vendor prefix for
rv4162 compatible.
- A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
imx7d-sdb board.
- Increase the SGTL5000 LRCLK pad strength to fix a random audio
channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
boards.
- Clean up non-existing property 'enable-active-low' from fixed
regulator device nodes.
- Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
though device drivers do not use the polarity for now.
- Add Wifi and Bluetooth support for imx7d-sdb board.
- Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
- Update zii-rdu2 device tree source to use #include "..." for local
inclusion.
- A series from Philipp Zabel and Steve Longerbeam to enable video
capture support for imx6qdl platforms.
- A number of small random updates on various board support.
* tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
ARM: dts: ls1021a: update the clockgen node
ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
ARM: dts: imx6-sabreauto: create i2cmux for i2c3
ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
ARM: dts: imx6qdl: add capture-subsystem device
ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections
ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
ARM: dts: imx6qdl: add multiplexer controls
ARM: dts: imx6: Fix PCI GPIO reset polarity
ARM: dts: imx7d-sdb: Add Bluetooth support
ARM: dts: imx7d-sdb: Add Wifi support
ARM: dts: imx7d-sdb: Adjust the regulator nodes
ARM: dts: imx: Fix Ethernet PHY reset polarity
ARM: dts: imx7: Fix typo in watchdog pin name
ARM: dts: vf610-zii: Add switch eeprom-length properties
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- Select GPCv2 for i.MX7 SoCs to get imx-gpcv2 irqchip driver built
for i.MX7 platforms by default.
- A couple of patches from Leonard to add IMX6ULL cpu check and get
suspend/resume work on IMX6ULL.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZRcCWAAoJEFBXWFqHsHzO5U4IAKEHUCCu5r03kvyTeeoUKIq+
0UsGHy20b6/uvDepmHsdHxIEx94xa2XEIbQz0d9V4RT2VAkCrKDuy8uxGl1uB1GP
Kby7dLilsxzAdtLJFqTBd8yCQCS1QqjnGfbNnXUAqJCSGRtxFpaZQPBb0/84WFio
4pofj2W8X14xON3Q3+RP2Tjtl7tIjq4WYx8R1X8p3prvropdBFSxrm5cCp0KuEfR
OwJlrDk2Lc5kS3EYKa7i/has9gKaznr3If4iVavuPbDj2t+amYDBQO6+y0xEpAuK
4yfSgtZq52jmYScfCdCdmPVgYkY+gRYHAcr93sI4Blqyvi11oimknKhF61GQEXk=
=NmhT
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
The i.MX SoC updates for 4.13:
- Select GPCv2 for i.MX7 SoCs to get imx-gpcv2 irqchip driver built
for i.MX7 platforms by default.
- A couple of patches from Leonard to add IMX6ULL cpu check and get
suspend/resume work on IMX6ULL.
* tag 'imx-soc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx6ull: Make suspend/resume work like on 6ul
ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull
ARM: imx: Select GPCv2 for i.MX7
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add Linksys WRT3200ACM (Rango) support
- Add PWM properties for gpio on Aramda XP and 38x
- A couple of minor updates for the 98dx3236 and 98dx4251
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWUTNiiMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71SXoAJsEyr+EVfF0
JgsHdARO9tMWcZ8otQCdHFovLqsE2/sNSkwdZrUjaC3xRgY=
=bXFP
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.13-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.13 (part 1)
- Add Linksys WRT3200ACM (Rango) support
- Add PWM properties for gpio on Aramda XP and 38x
- A couple of minor updates for the 98dx3236 and 98dx4251
* tag 'mvebu-dt-4.13-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM
ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)
ARM: dts: armada-385-linksys: fixup button node names
ARM: dts: armada-385-linksys: group pins in pinctrl
ARM: dts: armada-385-linksys: partition layout is board specific
ARM: dts: armada-385-linksys: use binary unit prefixes
ARM: dts: armada-385-linksys: drop legacy DSA bindings
ARM: dts: armada-385-linksys: usb3 label cleanup
ARM: dts: armada-385-linksys: bm pools by label order
ARM: dts: armada-385-linksys: drop redundant properties in dependants
ARM: dts: armada-385-linksys: flatten dependants
ARM: dts: armada-385-linksys: label nodes
ARM: dts: armada-385-linksys: flatten dtsi
ARM: dts: mvebu: disable the rtc on 98dx3236 SoC
ARM: dts: mvebu: add missing interrupt to 98dx4251 switch
ARM: dts: armada-xp: Use pwm-fan rather than gpio-fan
ARM: dts: mvebu: Add PWM properties for armada-38x
ARM: dts: mvebu: Add PWM properties to .dtsi files
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the SENSORS_PWM_FAN in mvebu_v7_defconfig support by gpio
driver since the previous release
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWUTMRCMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71RDfAJ0RBMTsdw/g
e/aR1Jdf5BboEJ876gCeIGEATN8sYCxSKHLC7x0hVZnC1p4=
=ZuTF
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.13-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu defconfig for 4.13
Enable the SENSORS_PWM_FAN in mvebu_v7_defconfig support by gpio
driver since the previous release
* tag 'mvebu-defconfig-4.13-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
- Switch to the new NAND binding
- A few non urgent fixes
-----BEGIN PGP SIGNATURE-----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=N7os
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.13-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
DT for 4.13
- Switch to the new NAND binding
- A few non urgent fixes
* tag 'at91-ab-4.13-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91: sama5d2_xplained: remove wrong memory node
ARM: dts: at91: sama5d2_xplained: add pwm controller
ARM: dts: at91: Add the NOR flash available on sama5d3 dev kits
ARM: dts: at91: Switch to the new NAND bindings
ARM: dts: at91: Declare EBI/NAND controllers
dt-bindings: mtd: atmel-nand: Document the nfc-io bindings
ARM: dts: at91-sama5d4: use IRQ_TYPE_* to specify irq flags
dts: gpio_atmel: adapt binding doc to reality
ARM: dts: at91: sama5d2: add m_can nodes
ARM: dts: at91: Add generic compatible string for I2C EEPROM
Signed-off-by: Olof Johansson <olof@lixom.net>
* Use GENPD_FLAG_ALWAYS_ON in pm-rmobile
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZQ9yHAAoJENfPZGlqN0++e24P/1LMPbav2HSUkCVTOTyXvsYW
iKwz90zBtGZpaQx9vxItUmzYw7NKbfc3qz3Nw6e7Jvyz2lQH2FucFjyIvdNlwQl5
c5h5fzmQb+4ci+nGiQxOQpSq3yNkXk4jqTiJr4xRCuSSvnQcvhO8x1iv0Gtn7qHk
YYXuBDxUAYRHvj2Y66LxsZRxaHOtKd58vnmqABqrIYBGY+H/NeEYA8LjryYzFVAx
v+W1+GbqoLcuC5j3j6oEigSEd15UB2SlPdJafMj7H/FzkQbShrNGY/WQUTRXsFxZ
da1j9QWEtmeP7q54rPVhrgiB1nzM3AOpkoieH936+eiP34cpPw7X48wsmcSE2Cmd
ZPt36n1qWyVXUwkeUaYO0URDr2NBwWtiyxGEi3vcJBkhgalX59pRdC7xMn7Uf1iL
xtia0GCiBy7bZoK11N6eUNuo955wVmbq1vjVikOny0p0oy2CwE6bob1NGgvcUghX
3aeq4jquDg/MdyJ/Catn1orLKHKNHFTmGLq3ijOrCxK48TlgC7t/fMC3f7rFY5Zp
DVHckTloOYzVa5w8vcFkCtE8UlEoI92SrZ97nEhnFVKLa2rqmIraaI1HOyuf1x3K
9IkGCt8TZYpn/zLzVO9F/0mgFVkVWI08D52eYZ76yIS/GU4/P/QunNj49X1dF9nu
e+2TZX3xkKHF3sGTcSuc
=BudK
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Renesas ARM Based SoC Updates for v4.13
* Use GENPD_FLAG_ALWAYS_ON in pm-rmobile
* tag 'renesas-soc-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON
Signed-off-by: Olof Johansson <olof@lixom.net>
Cleanup:
* Correct PCI bus dtc warnings for r8a779x SoCs
Enhancements:
* Add support for iWave G20D-Q7 board based on RZ/G1M SoC
* Add support for GR-Peach board based on r7s72100 SoC
* Add composite video and HDMI input to gose board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zBWR
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.13
Cleanup:
* Correct PCI bus dtc warnings for r8a779x SoCs
Enhancements:
* Add support for iWave G20D-Q7 board based on RZ/G1M SoC
* Add support for GR-Peach board based on r7s72100 SoC
* Add composite video and HDMI input to gose board
* tag 'renesas-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a779x: Fix PCI bus dtc warnings
ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1M
ARM: dts: iwg20m: Add iWave RZG1M Qseven SOM
ARM: dts: gose: add composite video input
ARM: dts: r7s72100: Add support for GR-Peach
ARM: dts: gose: add HDMI input
Signed-off-by: Olof Johansson <olof@lixom.net>
- Switch sama5 to be tickless in idle and enable hrtimer
- Add MCAN
-----BEGIN PGP SIGNATURE-----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=n/us
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.13-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig
defconfig for 4.13:
- Switch sama5 to be tickless in idle and enable hrtimer
- Add MCAN
* tag 'at91-ab-4.13-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: configs: at91: add MCAN driver to sama5_defconfig
ARM: configs: at91: enable HIGH_RES_TIMERS
ARM: configs: at91: make system tickless when idle
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add debug UART addresses for IPQ4019
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=k14G
-----END PGP SIGNATURE-----
Merge tag 'qcom-soc-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc
Qualcomm ARM Based SoC Updates for v4.13
* Add debug UART addresses for IPQ4019
* tag 'qcom-soc-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: debug: qcom: add UART addresses to Kconfig help for IPQ4019
Signed-off-by: Olof Johansson <olof@lixom.net>
* Fix IPQ4019 i2c0 node
* Add GSBI7 on IPQ8064
* Add misc APQ8060 devices
* Fixup USB related devices on APQ8064 and MSM8974
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ynzd
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm Device Tree Changes for v4.13
* Fix IPQ4019 i2c0 node
* Add GSBI7 on IPQ8064
* Add misc APQ8060 devices
* Fixup USB related devices on APQ8064 and MSM8974
* tag 'qcom-dts-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: add core I2C devices to the APQ8060 Dragonboard
ARM: dts: add GSBI8 defines to the MSM8660 family
ARM: dts: Qualcomm APQ8060 DragonBoard ALS sensor
ARM: dts: add XOADC and IIO HWMON to MSM8660/APQ8060
ARM: dts: qcom: ipq4019: fix i2c_0 node
ARM: dts: qcom: add gsbi7 serial to ipq8064 SoC device tree
ARM: dts: qcom-apq8064: Collapse usb support into one node
ARM: dts: qcom-msm8974: Add HS usb node and OTG detection mechanisms
ARM: dts: qcom: add charger otg regulator
ARM: dts: qcom: Remove s4/5vs1,2 from RPM pm8941 control
Signed-off-by: Olof Johansson <olof@lixom.net>
This removes support for the Whistler board, which only a handful of
people ever had access to and which doesn't provide any features over
other Tegra20 devices that we support.
Also this cleans up some PCI related device tree content in preparation
for a future DTC release that has additional checks for the PCI bus.
-----BEGIN PGP SIGNATURE-----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=Il+U
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.13-rc1
This removes support for the Whistler board, which only a handful of
people ever had access to and which doesn't provide any features over
other Tegra20 devices that we support.
Also this cleans up some PCI related device tree content in preparation
for a future DTC release that has additional checks for the PCI bus.
* tag 'tegra-for-4.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: dts: tegra: fix PCI bus dtc warnings
ARM: tegra: remove Whistler support
Signed-off-by: Olof Johansson <olof@lixom.net>
This cycle is a minor fixes one, with :
- Coccinelle found improvements
- magician getting touchscreen driver support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Uz4G
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.13' of https://github.com/rjarzmik/linux into next/soc
This is the pxa changes for v4.13 cycle.
This cycle is a minor fixes one, with :
- Coccinelle found improvements
- magician getting touchscreen driver support.
* tag 'pxa-for-4.13' of https://github.com/rjarzmik/linux:
ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
ARM: pxa: Improve a size determination in pxa3xx_u2d_probe()
ARM: pxa: Delete an error message for a failed memory allocation in pxa_pm_init()
ARM: pxa: magician: Add support for ADS7846 touchscreen
Signed-off-by: Olof Johansson <olof@lixom.net>
- PM clean-up in preparation of adding am335x/am437x PM support
- Fixes for issues found by Coccinelle
- Legacy code removal now that everything boots in device
tree only mode
- Interconnect changes in preparation of moving clkctrl clocks
to be managed by clkctrl clock driver
- Interconnect changes to add omap4 crypto acceclerator
support
-----BEGIN PGP SIGNATURE-----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=8du/
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.13/soc-v4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
SoC changes for omap variants for v4.13 merge window:
- PM clean-up in preparation of adding am335x/am437x PM support
- Fixes for issues found by Coccinelle
- Legacy code removal now that everything boots in device
tree only mode
- Interconnect changes in preparation of moving clkctrl clocks
to be managed by clkctrl clock driver
- Interconnect changes to add omap4 crypto acceclerator
support
* tag 'omap-for-v4.13/soc-v4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits)
ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
ARM: OMAP4: hwmod data: add des
ARM: OMAP4: hwmod data: add aes2
ARM: OMAP4: hwmod data: add aes1
ARM: OMAP2+: Remove unused legacy code for n8x0
ARM: OMAP2+: Remove unused legacy code for watchdog
ARM: OMAP2+: Remove unused legacy code for interconnects
ARM: OMAP2+: Remove unused legacy code for PRM
ARM: OMAP2+: Remove unused legacy code for io.c
ARM: OMAP2+: Remove unused legacy code for McBSP
ARM: OMAP2+: SmartReflex: Delete an error message for a failed memory allocation in two functions
ARM: OMAP2+: Use kcalloc() in sr_set_nvalues()
ARM: OMAP2+: Improve a size determination in sr_dev_init()
ARM: OMAP2+: Delete an error message for a failed memory allocation in two functions
ARM: OMAP2+: Remove unused legacy code for device init
ARM: OMAP2+: Remove unused legacy code for PMU
ARM: OMAP2+: Remove unused legacy code for opp
ARM: OMAP2+: hwmod: populate clkctrl clocks for hwmods if available
ARM: OMAP4: cminst: add support for clkdm_xlate_address
ARM: omap2+: clockdomain: add clkdm_xlate_address
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This tag is about bringing the EMAC support to the H3 boards.
-----BEGIN PGP SIGNATURE-----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=1g1O
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-h3-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3 changes for 4.13
This tag is about bringing the EMAC support to the H3 boards.
* tag 'sunxi-dt-h3-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E
arm: sun8i: orangepi-zero: Enable dwmac-sun8i
ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i
ARM: sun8i: orangepi-plus: Enable dwmac-sun8i
arm: sun8i: nanopi-neo: Enable dwmac-sun8i
arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high
arm: sun8i: orangepi-2: Enable dwmac-sun8i
arm: sun8i: orangepi-one: Enable dwmac-sun8i
arm: sun8i: orangepi-pc: Enable dwmac-sun8i
arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
Signed-off-by: Olof Johansson <olof@lixom.net>
A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.
-----BEGIN PGP SIGNATURE-----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=WD1J
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.12
A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.
* tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
Signed-off-by: Olof Johansson <olof@lixom.net>
The usual chunk of patches. The most notable improvements are the power
supplies improvements (battery and AC-IN), crypto support for the sun5i
family, HDMI support for the A10s, plus a lot of new things for the V3S and
the A83T.
-----BEGIN PGP SIGNATURE-----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=fwEx
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.13
The usual chunk of patches. The most notable improvements are the power
supplies improvements (battery and AC-IN), crypto support for the sun5i
family, HDMI support for the A10s, plus a lot of new things for the V3S and
the A83T.
* tag 'sunxi-dt-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
ARM: sun6i: a31s: primo81: Enable battery power supply
ARM: sun6i: a31s: primo81: Change USB OTG to OTG mode
ARM: sun8i: a83t: Add dt node for the syscon control module
ARM: sun8i: a83t: Add device node for R_PIO
ARM: sun8i: v3s: add device nodes for DE2 display pipeline
ARM: dts: sunxi: add SoC specific compatibles for the crypto nodes
ARM: sun5i: add a cryptographic engine node
ARM: sun8i: a83t: Add device node for PRCM
ARM: dts: sun8i: h3: Add initial NanoPi M1 Plus support
ARM: dts: orange-pi-zero: add node for SPI NOR
ARM: sun7i: a20: cubietruck: Tie AXP209's USB power supply to USB PHY
ARM: sun6i: a31: hummingbird: Enable AXP221's ACIN power supply
ARM: sun4i: a10: cubieboard: Enable AXP209's ACIN power supply
ARM: sun7i: a20: bananapi-m1-plus: Enable AXP209's ACIN power supply
ARM: sun7i: a20: cubieboard2: Enable AXP209's ACIN power supply
ARM: sun7i: a20: cubieboard2: Move usb_otg node for alphabetical ordering
ARM: sun8i: a83t: cubietruck-plus: Enable SPDIF output
ARM: sun8i: a83t: cubietruck-plus: Add LED device nodes
ARM: sun8i: a83t: Add device node for SPDIF transmitter
ARM: sun8i: a83t: Add device node for DMA controller
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- minor reorganization to support different busses
- add/use real clock controller
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3gA0
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic 32-bit DT changes for v4.13:
- minor reorganization to support different busses
- add/use real clock controller
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8: add and use the real clock controller
ARM: dts: meson: Extend L2 cache controller node for Meson8 and Meson8b
ARM: dts: meson8b: inherit meson.dtsi from meson8b.dtsi
ARM: dts: meson: organize devices in their corresponding busses
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAllBEAYRHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXPyAg//cVN2J5dZEMnIQmyUhIoL20KXfprsujyy
+qYyD5vhxpBvmo09ZqF3CqjQX3x8b2Y0rK9NnVeSmn/3W4U+pEyzMo8ml7j8Sx+C
S85Ngykvp9t1AU9pfkrb27CHugstPA+ctVrtWABrUQqriKWtNaCt//FyaK0p3he/
btrOpOsQ9K+TSDRbMdP6+ggWe2NYTkhj4rhsObu+PedWhsbj6AhELqHprzIxxCQl
ZPZxW4kNALUbnfie0QYrNJi+g0+RKA3y6ZS17KSnLw48jPj6+t4u3bimq9PR44/4
r8qN0dAWr74ObDJMZevz6xV/ArrW2eRU4jKXvovWxlebs1oGqdGeUH/sHUz2QSg7
l7fV3/VYeIA5n70ON2PEIpeiCLK9tVa9f8CCnEPOAdGafLaoQdKbM/udzis3N328
LmPzhU6zVsNrF/Iqc8mglvfET4Dy+FL5MoKZd7ffyYZn8J+1lM6SO577DzPKM/n0
9uyLuKkpHfLu4DP2Uyws5eu6XM+RhaCJbV9+amh0YZjWbep/q1X1UcZfr5uBuUQt
bsyhr7cbW0rK9mS+baFl49xNWw+A29b0XCDfJ3VhEA0d8MBAkHH6yzHwZvwhuobz
IzRerNrqxIq4Gi104f8vzExpmgt0lmlPx1tncPFUcfsw33I8mdox0aBI8aQLuX40
ILL3eT1xkgs=
=edS7
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.13/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
A series of omap1 changes for issues found by Coccinelle.
* tag 'omap-for-v4.13/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: Fix a typo in a comment line
ARM: OMAP1: Delete an error message for a failed memory allocation in omap1_dm_timer_init()
ARM: OMAP1: DMA: Delete an unnecessary return statement in omap1_show_dma_caps()
ARM: OMAP1: DMA: Delete an error message for a failed memory allocation in omap1_system_dma_init()
ARM: OMAP1: DMA: Improve a size determination in omap1_system_dma_init()
Signed-off-by: Olof Johansson <olof@lixom.net>
please pull the following:
- Stefan updates the bcm2835_defconfig to include serial, Ethernet and USB
gadget support which is needed for the Raspberry Pi Zero OTG changes
-----BEGIN PGP SIGNATURE-----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=7EnZ
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.13/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig updates for 4.13,
please pull the following:
- Stefan updates the bcm2835_defconfig to include serial, Ethernet and USB
gadget support which is needed for the Raspberry Pi Zero OTG changes
* tag 'arm-soc/for-4.13/defconfig' of http://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable serial & ethernet USB gadget support
Signed-off-by: Olof Johansson <olof@lixom.net>
Note that Baruch's changes are fixes that are currently included in v4.12-rc2,
but they are also included here in order to keep this tag based off v4.12-rc1.
Please pull the following:
- Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he
also adds the MDIO controller nodes for later use by USB PHYs
- Eric adds support for the V3D engine and Ethernet switch on the Cygnus
platforms, he also adds a set of Device Tree sources and include files for the
Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel,
- Jon adds CPU and thermal zones to the Northstar Plus Device Tree files
- Stefan updates the Raspberry Pi DTS files with thermal trip points and zones,
adds support for the USB OTG on the Raspberry Pi Zero which includes the
proper dwc2 configuration, a generic USB PHY and finally the enabling of the
OTG controller by including the proper DTS include file
- Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster
than the SDHCI)
-----BEGIN PGP SIGNATURE-----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=aDbe
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based Device Tree changes for 4.13.
Note that Baruch's changes are fixes that are currently included in v4.12-rc2,
but they are also included here in order to keep this tag based off v4.12-rc1.
Please pull the following:
- Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he
also adds the MDIO controller nodes for later use by USB PHYs
- Eric adds support for the V3D engine and Ethernet switch on the Cygnus
platforms, he also adds a set of Device Tree sources and include files for the
Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel,
- Jon adds CPU and thermal zones to the Northstar Plus Device Tree files
- Stefan updates the Raspberry Pi DTS files with thermal trip points and zones,
adds support for the USB OTG on the Raspberry Pi Zero which includes the
proper dwc2 configuration, a generic USB PHY and finally the enabling of the
OTG controller by including the proper DTS include file
- Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster
than the SDHCI)
* tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux:
ARM: dts: bcm2835-rpi-zero: Enable OTG mode
ARM: dts: bcm283x: Add generic USB PHY
ARM: dts: bcm283x: Add dtsi for OTG mode
ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY
ARM: dts: NSP: Add Thermal Support
ARM: dts: Cygnus: Add BCM11360's V3D device
ARM: dts: BCM5301X: Specify MDIO bus in the DT
ARM: dts: BCM5301X: Add CPU thermal sensor and zone
ARM: dts: bcm283x: switch from &sdhci to &sdhost
ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Signed-off-by: Olof Johansson <olof@lixom.net>
- Jon updates the Kconfig entry for Northstar Plus to have THERMAL and THERMAL_OF
selected in order to get the NS/NSP thermal driver dependencies to be satistfied
-----BEGIN PGP SIGNATURE-----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=vuRb
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.13/soc' of http://github.com/Broadcom/stblinux into next/soc
This pull request contains Broadcom ARM-based SoCs (non Device Tree) changes:
- Jon updates the Kconfig entry for Northstar Plus to have THERMAL and THERMAL_OF
selected in order to get the NS/NSP thermal driver dependencies to be satistfied
* tag 'arm-soc/for-4.13/soc' of http://github.com/Broadcom/stblinux:
ARM: BCM: Enable thermal support for NSP SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch introduces the MACH_STM32F469 to make possible to only select
STM32F469 pinctrl driver
By default, all the MACH_STM32Fxxx flags will be set with STM32 defconfig.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Split LCD mux and gpio on armadillo800eva board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oB4F
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/fixes-non-critical
Second Round of Renesas ARM Based SoC Fixes for v4.12
* Split LCD mux and gpio on armadillo800eva board
* tag 'renesas-fixes2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: armadillo800eva: Split LCD mux and gpio
Signed-off-by: Olof Johansson <olof@lixom.net>
<linux@armlinux.org.uk>, Barry Song <baohua@kernel.org>,
linux-kernel@vger.kernel.org
ARCH_ATLAS7 resides in "if ARCH_SIRF ... end", and ARCH_SIRF depends
on ARCH_MULTI_V7, which selects CPU_V7.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Fix possible circular Kconfig dependency on S3C64xx.
-----BEGIN PGP SIGNATURE-----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=dYgQ
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc
Samsung mach/soc update for v4.13:
1. Fix possible circular Kconfig dependency on S3C64xx.
* tag 'samsung-soc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c64xx: Do not select ARM_AMBA from S3C64XX_PL080
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Enable Exynos PRNG along with user-space crypto API.
-----BEGIN PGP SIGNATURE-----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=tl71
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig ARM update for v4.13:
1. Enable Exynos PRNG along with user-space crypto API.
* tag 'samsung-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable Exynos RNG and user-space crypto API
ARM: exynos_defconfig: Enable Exynos RNG and user-space crypto API
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlk50QIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgXU7B/9J5X3uamRBvcQVi1CGsd/T+zdThD6g6Z5O
0cgoeOMogJWzO4ceVwvNBkOg2noY1pUgvTiMZ2Qd9SWYiB22egAJKfDQQwmulk+Z
Kpq47CiBZaIR9Ovsq1Za7EVia9UKidtva+Wns5JCc62INSa9WJYWKgeDAnNoEBj3
GS0GH0YJqnZCod+da+ZAeK00+F7YNSmlu2Vk9nPnI02zcnLA72pZEMIMl5WP630A
/N+Rph2q++p6YQHfYbIs+ZBxLbiudKEItnYwwGZqdmihVE7CPdFXfk6dFXOBop8d
LY+7mJMJXpPK59XgSCq0wG8qKRfEZveuYKe8PglddF/A0MLZD85r
=6cMl
-----END PGP SIGNATURE-----
Merge tag 'v4.13-rockchip-soc32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
Add support for the RV1108 and its debug uart
* tag 'v4.13-rockchip-soc32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: enable support for RV1108 SoC
ARM: debug: add low level debug uart for rv1108
Signed-off-by: Olof Johansson <olof@lixom.net>
following (and including) the new Mali Midgard binding; a lot of
improvements for the rk3228/rk3229 socs (tsadc, operating points,
usb, clock-rates, pinctrl, watchdog); finalizing the rk1108->rv1108
rename and adc buttons for the rk3288 firefly boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlk5x+gQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVOmB/sHN5YBQCwdlermcO75CiLktacneQ6qcom2
GCBHfKwXxmey7puB8cKfQ1IgvvsKmXU1+QbUDjxD13p7b139WVRM3VEokOiSR7cl
XjGFFy9u6ECfPRpJfPBN/8oENcZ1N94S3gfhCwgcF6JDkumMI4DWVTLD4lZLeIcR
LTfZMddSevITXMzrWh0+Q9/TgnJbD58x4lSxs5m85h/8JDSfqdsijs/j2HJrBHPv
01NwQBm8w6rmTNL3UGfqDeUZTnmaczXRf2sgEr5ORLln2Qn++FpUaJiRPUdtYRs7
NEWLppFQeykoxgTQnttkt8oOyaKfNS3PsvwgA7R35w5HnbEtXcDK
=b2HZ
-----END PGP SIGNATURE-----
Merge tag 'v4.13-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
A bunch of changes including mali gpu nodes for rk3288 boards
following (and including) the new Mali Midgard binding; a lot of
improvements for the rk3228/rk3229 socs (tsadc, operating points,
usb, clock-rates, pinctrl, watchdog); finalizing the rk1108->rv1108
rename and adc buttons for the rk3288 firefly boards.
* tag 'v4.13-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable usb for rk3229 evb board
ARM: dts: rockchip: add usb nodes on rk322x
ARM: dts: rockchip: add adc button for Firefly
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-veyron
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-firefly
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-rock2-som
ARM: dts: rockchip: add ARM Mali GPU node for rk3288
dt-bindings: gpu: add bindings for the ARM Mali Midgard GPU
ARM: dts: rockchip: set a sane frequence for tsadc on rk322x
ARM: dts: rockchip: add operating-points-v2 for cpu on rk322x
ARM: dts: rockchip: set default rates for core clocks on rk322x
ARM: dts: rockchip: add second uart2 pinctrl on rk322x
ARM: dts: rockchip: correct rk322x uart2 pinctrl
ARM: dts: rockchip: add watchdog device node on rk322x
clk: rockchip: add clock-ids for more rk3228 clocks
clk: rockchip: add ids for camera on rk3399
ARM: dts: rockchip: fix rk322x i2s1 pinctrl error
ARM: dts: rockchip: rename RK1108-evb to RV1108-evb
ARM: dts: rockchip: rename core dtsi from RK1108 to RV1108
ARM: dts: rockchip: Setup usb vbus-supply on rk3288-rock2
Signed-off-by: Olof Johansson <olof@lixom.net>
CPPI 4.1 DMA for MUSB, some commonly used USB devices, and
Lego Mindstorms EV3 battery driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=FfEE
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.13/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Re-sync of davinci_all_defconfig with savedefconfig and enable
CPPI 4.1 DMA for MUSB, some commonly used USB devices, and
Lego Mindstorms EV3 battery driver.
* tag 'davinci-for-v4.13/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable CPPI 4.1 USB OTG DMA
ARM: davinci_all_defconfig: enable USB audio/video device support
ARM: davinci_all_defconfig: cleanup with savedefconfig
ARM: davinci_all_defconfig: enable LEGO MINDSTORMS EV3 battery module
Signed-off-by: Olof Johansson <olof@lixom.net>
EV3 battery support, DMA support for MUSB, and non-critical fixes to
GPIO nodes of DA850's GPIO controller and GPIO expander available on
DA850 EVM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZLlm
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.13/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
Miscellaneous DT support updates for DA850. Includes Lego mindstorms
EV3 battery support, DMA support for MUSB, and non-critical fixes to
GPIO nodes of DA850's GPIO controller and GPIO expander available on
DA850 EVM.
* tag 'davinci-for-v4.13/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-evm: fix tca6416 for use with GPIO hogs
ARM: dts: da850: Add interrupt-controller property to gpio node
ARM: dts: da850: Add CPPI 4.1 DMA to USB OTG controller
ARM: dts: da850-lego-ev3: Add node for LEGO MINDSTORMS EV3 Battery
Signed-off-by: Olof Johansson <olof@lixom.net>
support for DA850 SoC. This lays the foundation for
DT conversion of da8xx remoteproc driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xwdB
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.13/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
DaVinci SoC support updates enhancing DSP remoteproc
support for DA850 SoC. This lays the foundation for
DT conversion of da8xx remoteproc driver.
* tag 'davinci-for-v4.13/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da8xx: Add DSP internal RAM memories as IOMEM resources
ARM: davinci: da8xx: Add names to DSP IOMEM resources
ARM: davinci: da8xx: Create DSP device only when assigned memory
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds support for am335x-boneblue. The rest of
the changes are for enabling features on various
devices with the git shortlog describing the changes.
-----BEGIN PGP SIGNATURE-----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=u58m
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.13/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Device tree changes for omaps for v4.13 merge window.
This adds support for am335x-boneblue. The rest of
the changes are for enabling features on various
devices with the git shortlog describing the changes.
* tag 'omap-for-v4.13/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm: dts: am33xx: Remove redundant interrupt-parent property
ARM: dts: bonegreen-wireless: add WL1835 Bluetooth device node
ARM: dts: AM43XX: Remove min and max voltage values for dcdc3
ARM: dts: Add am335x-boneblue
ARM: dts: twl4030: Add missing madc reference for bci subnode
ARM: dts: am43xx-clocks: Add support for CLKOUT2
ARM: dts: Configure USB host for 37xx-evm
ARM: dts: omap: Add generic compatible string for I2C EEPROM
ARM: dts: Enable earlycon stdout path for LogicPD torpedo
ARM: dts: Enable earlycon stdout path for duovero
arm: dts: boneblack-wireless: add WL1835 Bluetooth device node
ARM: dts: am571x-idk: Enable the system mailboxes 5 and 6
ARM: dts: am572x-idk: Enable the system mailboxes 5 and 6
ARM: dts: omap4-devkit8000: fix gpmc ranges property
ARM: dts: omap3: Remove 'enable-active-low' property
ARM: dts: OMAP5: uevm: add µSD card detect
ARM: dts: omap4-droid4: Add bluetooth
ARM: dts: dra7x-evm: Enable dual-role mode for USB1
ARM: dts: Use - instead of @ for DT OPP entries for TI SoCs
ARM: dts: am335x-phycore-som: fix rv4162 compatible
Signed-off-by: Olof Johansson <olof@lixom.net>
for claiming SPI pins, and to fix a SDIO card detect
pin for production version of the device.
-----BEGIN PGP SIGNATURE-----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=e4F/
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Two fixes for am335x-sl50 to fix a boot time error
for claiming SPI pins, and to fix a SDIO card detect
pin for production version of the device.
* tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
ARM: dts: am335x-sl50: Fix card detect pin for mmc1
Signed-off-by: Olof Johansson <olof@lixom.net>
include/asm-generic/bitops/find.h declares:
extern unsigned long
find_first_zero_bit(const unsigned long *addr, unsigned long size);
while arch/arm/include/asm/bitops.h declares:
#define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz)
extern int _find_first_zero_bit_le(const void * p, unsigned size);
Align the arm prototypes to the generic API, to have gcc report
inadequate arguments, such as pointer to u32.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The DYNAMIC_FTRACE_WITH_REGS configuration makes it possible for a
ftrace operation to specify if registers need to saved/restored by
the ftrace handler. This is needed by kgraft and possibly other
ftrace-based tools, and the ARM architecture is currently lacking
this feature. It would also be the first step to support the
"Kprobes-on-ftrace" optimization on ARM.
This patch introduces a new ftrace handler that stores the registers
on the stack before calling the next stage. The registers are restored
from the stack before going back to the instrumented function.
A side-effect of this patch is to activate the support for
ftrace_modify_call() as it defines ARCH_SUPPORTS_FTRACE_OPS for the
ARM architecture.
Signed-off-by: Abel Vesa <abelvesa@linux.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Select CONFIG_IMX7D_ADC so that the i.MX7 ADC driver can be
built by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The cm-fx6 module has an on-board AW-NH387 WiFi/BT module which is
based on Marvell's SD8787 chip and is connected to the usdhc1
controller.
Unfortunately, the chip gets unresponsive if the Bluetooth AMP
(Alternate Mac/Phy) function gets probed but the loaded firmware
doesn't support it. For instance, this is the case for the most
recent firmware in linux-firmware (Version 14.66.35.p52).
Thus, just add the required nodes but leave the usdhc1 node disabled
explicitly. Users who disabled the Bluetooth (AMP) support of their
OS can then conveniently enable WiFi (or even plain Bluetooth) support
with a simple device tree overlay/bootloader configuration.
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The "test" and "conf" nand partitions partly overlap:
Creating 6 MTD partitions on "orion_nand":
0x000000000000-0x000000090000 : "uboot"
0x000000090000-0x0000000d4000 : "env"
0x0000000d4000-0x0000000f8000 : "test"
0x0000000f4000-0x0000004f4000 : "conf"
That is unlikely to be desired, and not matching the partition map used in
u-boot - So adjust the test partition size to fix this.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The Linksys WRT3200ACM (Rango) is the lates Armada-385 based router in
the Linksys WRT AC Series which got released in October 2016.
Key differences to the earlier Armada-385 based devices in the series is
a bigger flash chip, next generation wireless modules (Marvell 88W8964)
in the mini pcie slots as well as a Marvell SD8887. Finally the CPU is
clocked at 1866 GHz by default.
The file armada-385-linksys-rango.dts is loosly based off of a DTS
authored by Imre Kaloz.
As Rango is part of the armada-385-linksys family of boards use the
armada-385-linksys.dtsi as basis. As for functional differences to Imre
Kaloz dts, the wlan LEDs aren't connected to the expander chip pca9635
but directly to GPIOs. Then mpp47 controls the USB2.0 port and not the
USB3.0 port, so use the correct GPIO mpp44 for it. Finally use
non-removable instead of broken-cd with the sdhci node to avoid polling.
Other changes can be categorized as just cleanup / reorganization due to
using the armada-385-linksys.dtsi.
URL: 0abc3fa5a9/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Buttons don't have a reg property; drop pseudo address and fixup names
of individual button nodes. Also drop #address-cells and #size-cells
properties.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
A pin group per node is sufficient, further specialization only serves
as documentation which can be a comment just as well. This simplifies
configuring pins for nodes in dependants.
Also use labels which end up right by the node they are intended for.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Move the partition layout to individual boards. The Linksys WRT 3200 ACM
(Rango) comes with a 256MiB nand flash chip and different layout.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Use IEEE 1541-2002 unit prefixes for sizes.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The new ones work so there is little reason to keep the legacy bindings.
Use the rework as the opportunity to drop the legacy node.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Now that we use the reference for the USB3.0 port update the node name
and labels for the phy and vbus to match the label used by
armada-38x.dtsi.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Which pools we assing doesn't matter. Use the order which doesen't leave
a chance for questions for first time readers.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Drop redundant declaration of #address-cells and #size-cells.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Flatten dts of individual boards to match the new style used in
armada-385-linksys.dtsi and for the Rango addition.
* Caiman - Linksys WRT1200AC v1 & v2
* Cobra - Linksys WRT1900AC v2
* Shelby - Linksys WRT1900ACS v1 & v2
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add labels to nodes used by dependants. Also rename node gpio_keys to
gpio-keys to match the style of the rest of the file as well as the
documented example.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Since the addition of the spi reference two styles are used. Use
references instead of recreating the same structure over and over again.
This helps to distinguish which are changes to the underlying nodes and
which are new additions and helps maintainability in general.
Verified the resulting dtb to be binary identical.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
There is no rtc for the 98dx3236 and derivative SoCs. Disable the rtc
node inherited from the armada-370-xp base.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The 98dx4251 has 4 interrupts for the packet processor whereas the
98dx3236 and 98dx3336 only have 3.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The mvebu GPIO driver can also perform PWM on some pins. Use the pwm-fan
driver to control the fan of the WRT1900AC, giving us finer grained control
over its speed and hence noise.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427291/
[Ralph Sennhauser: drop flags paramter from pwms, no longer used]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the required properties to the GPIO nodes for them to be used as PWM
lines.
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add properties to the GPIO nodes for Armada 370/XP to allow them to be
also used as PWM lines.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427294/
[Ralph Sennhauser: Add new compatible string marvell,armada-370-gpio]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Now that the GPIO driver also supports PWM operation, enable the PWM
framework and fan driver in mvebu_v7_defconfig.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427297/
[Ralph Sennhauser: add fan driver to defconfig]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Until now clk81 was used as gate clock for the ethernet controller on
Meson8 whereas Meson8b did not configure a gate clock at all. Use
CLKID_ETH for both SoCs, which is the real gate clock for the ethernet
controller.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Amlogic's Meson8b SoC has a Snoop Control Unit (SCU), just like many
other Cortex-A5 SoCs. Add the corresponding devicetree node so it can be
used during SMP boot.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This adds the DWC2 USB controller nodes and the corresponding USB2 PHY
nodes to meson.dtsi (as the same - or at least a very similar) IP block
is used on all SoCs (at the same physical address).
Additionally meson8.dtsi and meson8b.dtsi add the required clocks to the
DWC2 and USB2 PHY nodes, otherwise the DWC2 controller cannot be
initialized by the dwc2 driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
All supported Meson SoCs have a random number generator in CBUS.
Newer SoCs (GXBB, GXL and GXM) provide only one 32-bit random number
register, whereas the older SoCs (Meson6, Meson8 and Meson8b) have two
32-bit random number registers. The existing meson-rng driver only
supports the lower 32-bit - but it still works fine on the older SoCs
apart from this small limitation.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
There seem to be two memory regions that need to be reserved, otherwise
the system just hangs when running:
$ stress --vm-bytes $(awk '/MemFree/{printf "%d\n", $2 * 0.9;}' < /proc/meminfo)k \
--vm-keep -m 1
The first memory region is really crucial and without it the system
hangs. I could not find any references to this in Amlogic's GPL kernel
sources.
The second region is used by the "suspend firmware". The u-boot sources
(/arch/arm/cpu/aml_meson/m8/firmwareld.c) state that the suspend
firmware is located at "64M + 15M" which matches CONFIG_MESON_SUSPEND in
the Amlogic GPL kernel sources. The "suspend firmware" is responsible
for waking up the system from suspend state.
This also fixes reading the full SD card as without this the system
would simply hang (probably related to the first memory region, if some
buffer is allocated there).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This adds the SAR ADC to meson.dtsi and configures the clocks on Meson8
and Meson8b to allow boards to use it. Some boards use it to connect a
button to it.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This adds the definition of the PWM_E (CBUS) and PWM_F (AOBUS) to
meson8.dtsi, allowing devices to use them. PWM_E can be used on some
devices to generate the 32.768kHz clock for the SDIO wifi module, while
PWM_F can be used to control the power LED.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This makes meson.dtsi easier to read as we are not using magic numbers
for the GIC interrupt type (GIC_SPI) and the interrupt polarity
(IRQ_TYPE_EDGE_RISING).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This replaces the "/include/" syntax with the "#include" syntax in all
Amlogic Meson .dts and .dtsi files. That is required to use preprocessor
defines (like GIC_SPI and IRQ_TYPE_EDGE_RISING) in meson.dtsi (all files
which directly or indirectly include meson.dtsi need to use the
"#include" syntax, otherwise the .dts files cannot be compiled).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The IR receiver pins are currently defined in the CBUS pin-controller.
However the pins are in the AO region, which is controlled by the AOBUS
pin-controller. Move the pins to pinctrl_aobus so they can actually be
used.
Fixes: b60e1157d8 ("ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This reset gpio is active low, therefore fix from active high to low.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
mtdtests module has some useful tests to verify that
mtd drivers like davinci_nand are working correctly.
Enable it in davinci_all_defconfig to make testing and
debug easier.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
After VPIF was converted to enable getting subdevs from DT, the
pdata is no longer const, so remove these to avoid compiler warnings.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: minor commit message fixup]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The Odroid-U3 board has an IP4791CZ12 level shifter that is
disabled if the HPD is low, which means that the CEC pin is
disabled as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
qoriq clock driver has been updated to parse the clock configuration
information defined in driver itself not in dts.
Since the new implementation and the bindings have been merged,
it is time to update the clock related node and remove redundent clock
configuration information from the dts.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Setting trip points is supported by the imx thermal driver and it is
useful to be able to test this without adjusting config.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The MSI Primo81 tablet has a 3500 mAh 3.7V LiPo battery.
Enable the PMIC's battery power supply so the battery can be monitored.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Now that we have support for the AXP221 PMIC's USB VBUS detection and
DRIVEVBUS vbus control, we can use the USB OTG port in proper OTG mode.
This patch enables the aforementioned PMIC functions, adds the OTG ID
detection pin to the USB PHY node, and changes the mode of USB OTG to
"otg".
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch add the dt node for the syscon register present on the
Allwinner A83T
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enables the ADV7180 decoder sensor. The ADV7180 connects to the
parallel-bus mux input on ipu1_csi0_mux.
The ADV7180 power pin is via max7310_b port expander.
Changes from Tim Harvey:
- Use IRQ_TYPE_LEVEL_LOW instead of 0x8 for interrupt type for clarity.
- For 8-bit parallel IPU1-CSI0 bus connection only data[12-19] are used.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The reset pin to the port expander chip (MAX7310) is controlled by a gpio,
so define a reset-gpios property to control it. There are three MAX7310's
on the SabreAuto CPU card (max7310_[abc]), but all use the same pin for
their reset. Since all can't acquire the same pin, assign it to max7310_b,
that chip is needed by more functions (usb and adv7180).
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The sabreauto uses a steering pin to select between the SDA signal on
i2c3 bus, and a data-in pin for an SPI NOR chip. Use i2cmux to control
this steering pin. Idle state of the i2cmux selects SPI NOR. This is not
a classic way to use i2cmux, since one side of the mux selects something
other than an i2c bus, but it works and is probably the cleanest
solution. Note that if one thread is attempting to access SPI NOR while
another thread is accessing i2c3, the SPI NOR access will fail since the
i2cmux has selected the SDA pin rather than SPI NOR data-in. This couldn't
be avoided in any case, the board is not designed to allow concurrent
i2c3 and SPI NOR functions (and the default device-tree does not enable
SPI NOR anyway).
Devices hanging off i2c3 should now be defined under i2cmux, so
that the steering pin can be properly controlled to access those
devices. The port expanders (MAX7310) are thus moved into i2cmux.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the OV5642 parallel-bus sensor, and the OV5640 MIPI CSI-2 sensor.
The OV5642 connects to the parallel-bus mux input port on ipu1_csi0_mux.
The OV5640 connects to the input port on the MIPI CSI-2 receiver on
mipi_csi.
Until the OV5652 sensor module compatible with the SabreSD becomes
available for testing, the ov5642 node is currently disabled.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds the OV5642 parallel-bus sensor, and the OV5640 MIPI CSI-2 sensor.
Both hang off the same i2c2 bus, so they require different (and non-
default) i2c slave addresses.
The OV5642 connects to the parallel-bus mux input port on ipu1_csi0_mux.
The OV5640 connects to the input port on the MIPI CSI-2 receiver on
mipi_csi.
The OV5642 node is disabled temporarily while the subdev driver is
cleaned up and submitted later.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is a pin conflict with GPIO_6. This pin functions as a power
input pin to the OV5642 camera sensor, but ENET uses it as the h/w
workaround for erratum ERR006687, to wake-up the ARM cores on normal
RX and TX packet done events. So we need to remove the h/w workaround
to support the OV5642. The result is that the CPUidle driver will no
longer allow entering the deep idle states on the sabrelite.
This is a partial revert of
commit 6261c4c8f1 ("ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC
interrupt.")
commit a28eeb43ee ("ARM: dts: imx6: tag boards that have the HW workaround
for ERR006687")
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch adds the device tree graph connecting the input multiplexers
to the IPU CSIs and the MIPI-CSI2 gasket on i.MX6. The MIPI_IPU
multiplexers are added as children of the iomuxc-gpr syscon device node.
On i.MX6Q/D two two-input multiplexers in front of IPU1 CSI0 and IPU2
CSI1 allow to select between CSI0/1 parallel input pads and the MIPI
CSI-2 virtual channels 0/3.
On i.MX6DL/S two five-input multiplexers in front of IPU1 CSI0 and IPU1
CSI1 allow to select between CSI0/1 parallel input pads and any of the
four MIPI CSI-2 virtual channels.
Changes from Steve Longerbeam:
- Removed some dangling/unused endpoints (ipu2_csi0_from_csi2ipu)
- Renamed the mipi virtual channel endpoint labels, from "mipi_csiX_..."
to "mipi_vcX...".
- Added input endpoint anchors to the video muxes for the connections
from parallel sensors.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The IOMUXC General Purpose Register space contains various bitfields
that control video bus multiplexers. Describe them using a mmio-mux
node. The placement of the IPU CSI video mux controls differs between
i.MX6D/Q and i.MX6S/DL.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The config option name is now renamed to 'TIMER_OF' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The function name is now renamed to 'timer_probe' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the
clocksource at early stage. However, this macro is also used to initialize
the clockevent if any, or the clockevent only.
It was originally suggested to declare another macro to initialize a
clockevent, so in order to separate the two entities even they belong to the
same IP. This was not accepted because of the impact on the DT where splitting
a clocksource/clockevent definition does not make sense as it is a Linux
concept not a hardware description.
On the other side, the clocksource has not interrupt declared while the
clockevent has, so it is easy from the driver to know if the description is
for a clockevent or a clocksource, IOW it could be implemented at the driver
level.
So instead of dealing with a named clocksource macro, let's use a more generic
one: TIMER_OF_DECLARE.
The patch has not functional changes.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The last commit from me had a missing ';' which broke the build.
Thanks to Arnd for pointing out the issue.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve handling of always-on PM domains by using the
GENPD_FLAG_ALWAYS_ON flag introduced in commit ffaa42e8a4 ("PM /
Domains: Enable users of genpd to specify always on PM domains").
Note that the PM domain containing the serial console is still handled
locally.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
OMAP4 SoC contains SHAM crypto hardware accelerator. Add hwmod data for
this IP so that it can be utilized by crypto frameworks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This fixes the following error during kernel boot:
platform 480a5000.des: Cannot lookup hwmod 'des'
Unfortunately the DES module is only documented partly
in the OMAP4430 TRM. I found an old patch from Joel,
which I took over and updated for currently mainline.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds the hwmod entry for the second AES module
available on OMAP4.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This fixes the following error during kernel boot:
platform 4b501000.aes: Cannot lookup hwmod 'aes1'
Unfortunately the AES module is only documented partly
in the OMAP4430 TRM. I found an old patch from Joel,
which I took over and updated for currently mainline.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
OMAP4 has AES2 instance, so add its integration data under DT.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
