The conversion of the FPSIMD context switch trap code to C has added
some overhead to calling it, due to the need to save registers that
the procedure call standard defines as caller-saved.
So, perhaps it is no longer worth invoking this trap handler quite
so early.
Instead, we can invoke it from fixup_guest_exit(), with little
likelihood of increasing the overhead much further.
As a convenience, this patch gives __hyp_switch_fpsimd() the same
return semantics fixup_guest_exit(). For now there is no
possibility of a spurious FPSIMD trap, so the function always
returns true, but this allows it to be tail-called with a single
return statement.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
To make the lazy FPSIMD context switch trap code easier to hack on,
this patch converts it to C.
This is not amazingly efficient, but the trap should typically only
be taken once per host context switch.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The function SMCCC_ARCH_WORKAROUND_1 was introduced as part of SMC
V1.1 Calling Convention to mitigate CVE-2017-5715. This patch uses
the standard call SMCCC_ARCH_WORKAROUND_1 for Falkor chips instead
of Silicon provider service ID 0xC2001700.
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
[maz: reworked errata framework integration]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Creates far too many conflicts with arm64/for-next/core, to be
resent post -rc1.
This reverts commit f9f5dc1950.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The function SMCCC_ARCH_WORKAROUND_1 was introduced as part of SMC
V1.1 Calling Convention to mitigate CVE-2017-5715. This patch uses
the standard call SMCCC_ARCH_WORKAROUND_1 for Falkor chips instead
of Silicon provider service ID 0xC2001700.
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We already have the percpu area for the host cpu state, which points to
the VCPU, so there's no need to store the VCPU pointer on the stack on
every context switch. We can be a little more clever and just use
tpidr_el2 for the percpu offset and load the VCPU pointer from the host
context.
This has the benefit of being able to retrieve the host context even
when our stack is corrupted, and it has a potential performance benefit
because we trade a store plus a load for an mrs and a load on a round
trip to the guest.
This does require us to calculate the percpu offset without including
the offset from the kernel mapping of the percpu array to the linear
mapping of the array (which is what we store in tpidr_el1), because a
PC-relative generated address in EL2 is already giving us the hyp alias
of the linear mapping of a kernel address. We do this in
__cpu_init_hyp_mode() by using kvm_ksym_ref().
The code that accesses ESR_EL2 was previously using an alternative to
use the _EL1 accessor on VHE systems, but this was actually unnecessary
as the _EL1 accessor aliases the ESR_EL2 register on VHE, and the _EL2
accessor does the same thing on both systems.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We expect to have firmware-first handling of RAS SErrors, with errors
notified via an APEI method. For systems without firmware-first, add
some minimal handling to KVM.
There are two ways KVM can take an SError due to a guest, either may be a
RAS error: we exit the guest due to an SError routed to EL2 by HCR_EL2.AMO,
or we take an SError from EL2 when we unmask PSTATE.A from __guest_exit.
The current SError from EL2 code unmasks SError and tries to fence any
pending SError into a single instruction window. It then leaves SError
unmasked.
With the v8.2 RAS Extensions we may take an SError for a 'corrected'
error, but KVM is only able to handle SError from EL2 if they occur
during this single instruction window...
The RAS Extensions give us a new instruction to synchronise and
consume SErrors. The RAS Extensions document (ARM DDI0587),
'2.4.1 ESB and Unrecoverable errors' describes ESB as synchronising
SError interrupts generated by 'instructions, translation table walks,
hardware updates to the translation tables, and instruction fetches on
the same PE'. This makes ESB equivalent to KVMs existing
'dsb, mrs-daifclr, isb' sequence.
Use the alternatives to synchronise and consume any SError using ESB
instead of unmasking and taking the SError. Set ARM_EXIT_WITH_SERROR_BIT
in the exit_code so that we can restart the vcpu if it turns out this
SError has no impact on the vcpu.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
KVM uses tpidr_el2 as its private vcpu register, which makes sense for
non-vhe world switch as only KVM can access this register. This means
vhe Linux has to use tpidr_el1, which KVM has to save/restore as part
of the host context.
If the SDEI handler code runs behind KVMs back, it mustn't access any
per-cpu variables. To allow this on systems with vhe we need to make
the host use tpidr_el2, saving KVM from save/restoring it.
__guest_enter() stores the host_ctxt on the stack, do the same with
the vcpu.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Falkor is susceptible to branch predictor aliasing and can
theoretically be attacked by malicious code. This patch
implements a mitigation for these attacks, preventing any
malicious entries from affecting other victim contexts.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
[will: fix label name when !CONFIG_KVM and remove references to MIDR_FALKOR]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If EL1 generates an asynchronous abort and then traps into EL2
before the abort has been delivered, we may end-up with the
abort firing at the worse possible place: on the host.
In order to avoid this, it is necessary to take the abort at EL2,
by clearing the PSTATE.A bit. In order to survive this abort,
we do it at a point where we're in a known state with respect
to the world switch, and handle the resulting exception,
overloading the exit code in the process.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
SCTLR_EL2.SPAN bit controls what happens with the PSTATE.PAN bit on an
exception. However, this bit has no effect on the PSTATE.PAN when
HCR_EL2.E2H or HCR_EL2.TGE is unset. Thus when VHE is used and
exception taken from a guest PSTATE.PAN bit left unchanged and we
continue with a value guest has set.
To address that always reset PSTATE.PAN on entry from EL1.
Fixes: 1f364c8c48 ("arm64: VHE: Add support for running Linux in EL2 mode")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
We are doing an unnecessary stack push/pop operation when restoring
the guest registers x0-x18 in __guest_enter(). This patch saves the
two instructions by using x18 as a base register. No need to store
the vcpu context pointer in stack because it is redundant, the same
information is available in tpidr_el2. The function __guest_exit()
calling convention is slightly modified, caller only pushes the regs
x0-x1 to stack instead of regs x0-x3.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Now that we only have the "merged page tables" case to deal with,
there is a bunch of things we can simplify in the HYP code (both
at init and teardown time).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
If memory is located above 1<<VA_BITS, kvm adds an extra level to its page
tables, merging the runtime tables and boot tables that contain the idmap.
This lets us avoid the trampoline dance during initialisation.
This also means there is no trampoline page mapped, so
__cpu_reset_hyp_mode() can't call __kvm_hyp_reset() in this page. The good
news is the idmap is still mapped, so we don't need the trampoline page.
The bad news is we can't call it directly as the idmap is above
HYP_PAGE_OFFSET, so its address is masked by kvm_call_hyp.
Add a function __extended_idmap_trampoline which will branch into
__kvm_hyp_reset in the idmap, change kvm_hyp_reset_entry() to return
this address if __kvm_cpu_uses_extended_idmap(). In this case
__kvm_hyp_reset() will still switch to the boot tables (which are the
merged tables that were already in use), and branch into the idmap (where
it already was).
This fixes boot failures on these systems, where we fail to execute the
missing trampoline page when tearing down kvm in init_subsystems():
[ 2.508922] kvm [1]: 8-bit VMID
[ 2.512057] kvm [1]: Hyp mode initialized successfully
[ 2.517242] kvm [1]: interrupt-controller@e1140000 IRQ13
[ 2.522622] kvm [1]: timer IRQ3
[ 2.525783] Kernel panic - not syncing: HYP panic:
[ 2.525783] PS:200003c9 PC:0000007ffffff820 ESR:86000005
[ 2.525783] FAR:0000007ffffff820 HPFAR:00000000003ffff0 PAR:0000000000000000
[ 2.525783] VCPU: (null)
[ 2.525783]
[ 2.547667] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.6.0-rc5+ #1
[ 2.555137] Hardware name: Default string Default string/Default string, BIOS ROD0084E 09/03/2015
[ 2.563994] Call trace:
[ 2.566432] [<ffffff80080888d0>] dump_backtrace+0x0/0x240
[ 2.571818] [<ffffff8008088b24>] show_stack+0x14/0x20
[ 2.576858] [<ffffff80083423ac>] dump_stack+0x94/0xb8
[ 2.581899] [<ffffff8008152130>] panic+0x10c/0x250
[ 2.586677] [<ffffff8008152024>] panic+0x0/0x250
[ 2.591281] SMP: stopping secondary CPUs
[ 3.649692] SMP: failed to stop secondary CPUs 0-2,4-7
[ 3.654818] Kernel Offset: disabled
[ 3.658293] Memory Limit: none
[ 3.661337] ---[ end Kernel panic - not syncing: HYP panic:
[ 3.661337] PS:200003c9 PC:0000007ffffff820 ESR:86000005
[ 3.661337] FAR:0000007ffffff820 HPFAR:00000000003ffff0 PAR:0000000000000000
[ 3.661337] VCPU: (null)
[ 3.661337]
Reported-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Despite the fact that a VHE enabled kernel runs at EL2, it uses
CPACR_EL1 to trap FPSIMD access. Add the required alternative
code to re-enable guest FPSIMD access when it has trapped to
EL2.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Having the system register numbers as #defines has been a pain
since day one, as the ordering is pretty fragile, and moving
things around leads to renumbering and epic conflict resolutions.
Now that we're mostly acessing the sysreg file in C, an enum is
a much better type to use, and we can clean things up a bit.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Implement the TLB handling as a direct translation of the assembly
code version.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Implement the fpsimd save restore, keeping the lazy part in
assembler (as returning to C would be overkill).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Contrary to the previous patch, the guest entry is fairly different
from its assembly counterpart, mostly because it is only concerned
with saving/restoring the GP registers, and nothing else.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
