Not all sunxi platforms with the first version of the Display Engine
support an alpha component on the plane with the lowest z position
(as in: lowest z-pos), that gets blended with the background color.
In particular, the A13 is known to have this limitation. However, it was
recently discovered that the A20 and A33 are capable of having alpha on
their lowest plane.
Thus, this introduces a specific quirk to indicate such support,
per-platform. Since this was not tested on sun4i and sun6i platforms, a
conservative approach is kept and this feature is not supported.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719080838.31598-2-paul.kocialkowski@bootlin.com
In prevision for introducing a new quirk that will be used at atomic
plane check time, register the quirks structure with the backend
structure. This way, it can easily be grabbed where needed.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719080838.31598-1-paul.kocialkowski@bootlin.com
Handle both positive and negative dclk polarity,
according to bus_flags, taking care of this:
On A20 and similar SoCs, the only way to achieve Positive Edge
(Rising Edge), is setting dclk clock phase to 2/3(240°).
By default TCON works in Negative Edge(Falling Edge), this is why phase
is set to 0 in that case.
Unfortunately there's no way to logically invert dclk through IO_POL
register.
The only acceptable way to work, triple checked with scope,
is using clock phase set to 0° for Negative Edge and set to 240° for
Positive Edge.
On A33 and similar SoCs there would be a 90° phase option, but it divides
also dclk by 2.
This patch is a way to avoid quirks all around TCON and DOTCLOCK drivers
for using A33 90° phase divided by 2 and consequently increase code
complexity.
Check if panel is used. TCON can also handle VGA DAC, then panel could
be empty.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718142357.120998-1-giulio.benetti@micronovasrl.com
Blending order is set based on the z position of each DRM plane. The
blending order register is currently cleared at each atomic DRM commit,
with the intent that each committed plane will set the appropriate
bits (based on its z-pos) when enabling the plane.
However, it sometimes happens that a particular plane is left unchanged
by an atomic commit and thus will not be configured again. In that
scenario, blending order is cleared and only the bits relevant for the
planes affected by the commit are set. This leaves the planes that did
not change without their blending order set in the register, leading
to that plane not being displayed.
Instead of clearing the blending order register at every atomic commit,
this change moves the register's initial clear at bind time and only
clears the bits for a specific plane when disabling it or changing its
zpos.
This way, planes that are left untouched by a DRM atomic commit are
no longer disabled.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717122522.11327-1-paul.kocialkowski@bootlin.com
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717084814.18091-1-tzimmermann@suse.de
When commit af11942ee4 ("drm/sun4i: tcon-top: Cleanup clock handling")
was merged, the error handling path of the of_property_match_string was
changed to take into account the fact that the returned value of that
function wasn't an error pointer but an error code.
Unfortunately, this introduced a warning since the now returned value is an
integer, while the sun8i_tcon_top_register_gate function should return an
error pointer.
Fix that by calling ERR_PTR.
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Chen-Yu Tsai <wens@csie.org>
Fixes: af11942ee4 ("drm/sun4i: tcon-top: Cleanup clock handling")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712080818.3571-1-maxime.ripard@bootlin.com
Initial implementation of DE2 planes only supported fixed zpos.
Expand implementation with configurable zpos property.
Implementation background:
Channel in DE2 driver represents one DRM plane, whereas pipe is just
mapped channel to known Z position. Pipe 0 will always be at the bottom,
pipe 1 just above pipe 0 and so on. If, for example, channel 1 is mapped
at pipe 0 and channel 0 at pipe 1, whatever is on channel 0 will appear
on top.
Before this commit, channel id was used for addressing channel related
registers (prefixed with SUN8I_MIXER_CHAN_UI_ or SUN8I_MIXER_CHAN_VI_)
and pipe registers (prefixed with SUN8I_MIXER_BLEND_). Additionally,
register SUN8I_MIXER_BLEND_ROUTE, which takes care for mapping channels
to pipes had fixed value. It mapped channel 0 to pipe 0, 1 to 1 and so
on. Consequence of all that was fixed Z order of planes.
With this commit, pipe registers are using zpos property as index and
channel related registers still use channel id as index. Pipe mapping
register is now set dynamically too and pipe enable register is rebuild
every time to make sure only active pipes are enabled.
Testing was done to confirm that there is no issues if bottom plane
contains pixels with alpha value < 0xff and if it doesn't whole screen.
Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706164732.24166-1-jernej.skrabec@siol.net
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tcon_top.ko module:
ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun8i-drm-hdmi.ko] undefined!
ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
This solves the problem by adding a silent symbol for the tcon_top module,
building it as a separate module in exactly the cases that we need it,
but in a way that it is reachable by the other modules.
Fixes: 57e23de02f ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs")
Fixes: ef0cf6441f ("drm/sun4i: Add support for traversing graph with TCON TOP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711144403.1022829-1-arnd@arndb.de
Currently, TCON supports 2 ways to match TCON with engine (mixer in this
case). Old way is to just traverse of graph backwards and compare node
pointer. New way is to match TCON and engine by their respective ids.
All SoCs with DE2 enabled till now used the old way, which means mixer
id was never used and thus never implemented.
However, for R40, only the new way will be used. To prepare for that,
implement mixer id fetching from DT.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711112706.30222-1-jernej.skrabec@siol.net
We want to be able to set TCON TOP muxes at runtime. Add helpers for
that.
Old, static configuration of muxes at probe time is preserved for now.
It will be removed when R40 TCON starts using them.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-12-jernej.skrabec@siol.net
If error happens in sun8i_dw_hdmi_find_possible_crtcs(), nodes are not
released with of_node_put() before returning.
Fix that by calling of_node_put() when necessary. While on it, clean up
the code by using of_graph_get_remote_node() which also lowers number of
cases where error handling has to be performed.
Fixes: 57e23de02f ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-8-jernej.skrabec@siol.net
Function sun4i_tcon_find_engine_traverse() doesn't release node if it
needs to traverse of graph deeper than 1 level.
Fix this by calling of_node_put().
Fixes: 49836b11fe ("drm/sun4i: tcon: Generalize engine search algorithm")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-6-jernej.skrabec@siol.net
There is no need to acquire reference to clock just to get its name.
This commit just cleans up the code. There is no functional change.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[Maxime: Fixed the of_property_match_string error check]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-5-jernej.skrabec@siol.net
Right now, the DRM panel logic returns NULL when a panel pointing to
the passed OF node is not present in the list of registered panels.
Most drivers interpret this NULL value as -EPROBE_DEFER, but we are
about to modify the semantic of of_drm_find_panel() and let the
framework return -ENODEV when the device node we're pointing to has
a status property that is not equal to "okay" or "ok".
Let's first patch the of_drm_find_panel() implementation to return
ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace
the '!panel' check by an 'IS_ERR(panel)' one.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
When the base sun4i DRM driver is built-in but the back-end is
a loadable module, we run into a link error:
drivers/gpu/drm/sun4i/sun4i_drv.o: In function `sun4i_drv_probe':
sun4i_drv.c:(.text+0x60c): undefined reference to `sun4i_frontend_of_table'
The dependency is a bit tricky, the best workaround I have come up
with is to use a Makefile hack to to interpret both
CONFIG_DRM_SUN4I_BACKEND=m and CONFIG_DRM_SUN4I_BACKEND=y
as a directive to build the front-end the same way as the main module.
Fixes: dd0421f475 ("drm/sun4i: Add a driver for the display frontend")
Link: https://lore.kernel.org/lkml/20180301091908.zcptz3ezqr2c6ly5@flea/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706142847.2032381-1-arnd@arndb.de
At over 4000 #includes, <linux/platform_device.h> is the 9th most
#included header file in the Linux kernel. It does not need
<linux/mod_devicetable.h>, so drop that header and explicitly add
<linux/mod_devicetable.h> to source files that need it.
4146 #include <linux/platform_device.h>
After this patch, there are 225 files that use <linux/mod_devicetable.h>,
for a reduction of around 3900 times that <linux/mod_devicetable.h>
does not have to be read & parsed.
225 #include <linux/mod_devicetable.h>
This patch was build-tested on 20 different arch-es.
It also makes these drivers SubmitChecklist#1 compliant.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm_of_find_possible_crtcs() doesn't work when DW HDMI encoder is
connected to TCON (crtc) through mux in TCON TOP.
In that case TCON TOP HDMI mux input port has to be manually traversed
and checked if it matches any known crtc.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-23-jernej.skrabec@siol.net
DW HDMI PHY driver and PHY clock driver share same registers. Make sure
that DW HDMI PHY setup code doesn't change any clock related bits.
During initialization, set PHY PLL parent bit to 0.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-18-jernej.skrabec@siol.net
Current DW HDMI PHY code never prepares and enables PHY clock after it is
created. It's just used as it is. This may work in some cases, but it's
clearly wrong. Fix it by adding proper calls to enable/disable PHY
clock.
Fixes: 4f86e81748 ("drm/sun4i: Add support for H3 HDMI PHY variant")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-17-jernej.skrabec@siol.net
Both mixers have similar capabilities as others SoCs with DE2.
First mixer has 1 VI and 3 UI planes and supports HW scaling on all
planes.
Second mixer has 1 VI and 1 UI planes and also supports HW scaling on
all planes.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-15-jernej.skrabec@siol.net
TV TCONs are always connected to TV or HDMI encoder, so it doesn't make
sense to check if panel or bridge is connected to them.
Check if TCON has channel 0 and only then check for connected panel or
bridges.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-13-jernej.skrabec@siol.net
LVDS and RGB interfaces are always connected to TCONs which have channel
0. It doesn't make sense to try to init them on TV TCONs.
Add a check if TCON has channel 0 before trying to init LVDS or RGB
interface.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-12-jernej.skrabec@siol.net
Current "old" method to find engine worked pretty well for DE2. However,
it doesn't work when TCON TOP is between mixer (engine) and TCON. TCON
TOP has multiple input ports, but current engine search algorithm
expects only one.
This can be fixed by first looking for output port id and selecting
matching input by subtracting 1 for the next round. This work even if
there is only one input and output.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-11-jernej.skrabec@siol.net
TV TCONs (channel 1 only) are always connected to TV or HDMI encoder.
Because of that, all output endpoints on such TCON node will point to a
encoder which is part of component framework.
Correct current graph traversing algorithm in such way that it doesn't
skip output enpoints with id 0 on TV TCONs.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-10-jernej.skrabec@siol.net
TCON TOP is different from other nodes in graph by having 3 input and 3
output ports. Additionally, connection to TV TCON might lead back to
HDMI mux input port, creating loops.
Add support for traversing such graph.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-9-jernej.skrabec@siol.net
Until now, each node has one input port and one output port. However,
with TCON TOP this is no longer true. It has 3 input and 3 output ports.
In order to prepare to this situation, split out the code which checks
all endpoints in input port and adds available components to fifo.
This patch doesn't do any functional change.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-8-jernej.skrabec@siol.net
sun4i_drv_add_endpoints() has a memory leak since it uses of_node_put()
when remote is equal to NULL and does nothing when remote has a valid
pointer.
Invert the logic to fix memory leak.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-7-jernej.skrabec@siol.net
As already described in DT binding, TCON TOP is responsible for
configuring display pipeline. In this initial driver focus is on HDMI
pipeline, so TVE and LCD configuration is not implemented.
Implemented features:
- HDMI source selection
- clock driver (TCON and DSI gating)
- connecting mixers and TCONS
Something similar also existed in previous SoCs, except that it was part
of first TCON.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-6-jernej.skrabec@siol.net
- A reversion of a commit in drm/sun4i to fix a run-time fault.
- Various fixes to the sii8620 bridge.
- Small bugfix to correctly check stride in atmel-hlcdc.
-----BEGIN PGP SIGNATURE-----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=ngPr
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-06-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v4.18-rc2:
- A reversion of a commit in drm/sun4i to fix a run-time fault.
- Various fixes to the sii8620 bridge.
- Small bugfix to correctly check stride in atmel-hlcdc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com
This reverts commit 2c17a4368a.
The offending commit triggers a run-time fault when accessing the panel
element of the sun4i_tcon structure when no such panel is attached.
It was apparently assumed in said commit that a panel is always used with
the TCON. Although it is often the case, this is not always true.
For instance a bridge might be used instead of a panel.
This issue was discovered using an A13-OLinuXino, that uses the TCON
in RGB mode for a simple DAC-based VGA bridge.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180613081647.31183-1-paul.kocialkowski@bootlin.com
Disabling CONFIG_PM produces a compile time warning when these
functions are not referenced:
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:1072:12: error: 'sun6i_dsi_runtime_suspend' defined but not used [-Werror=unused-function]
static int sun6i_dsi_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:1043:12: error: 'sun6i_dsi_runtime_resume' defined but not used [-Werror=unused-function]
static int sun6i_dsi_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 133add5b5a ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525155030.3667352-1-arnd@arndb.de
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
-----BEGIN PGP SIGNATURE-----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=9LYY
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.18:
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 26 Apr 2018 08:21:01 PM AEST
# gpg: using RSA key FE558C72A67013C3
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/b33da7eb-efc9-ae6f-6f69-b7acd6df6797@mblankhorst.nl
The reverted commit broke LVDS output on TBS A711 Tablet. That tablet
has simple-panel node that has fixed pixel clock-frequency that A83T
SoC used in the tablet can't generate exactly.
Requested rate is 52000000 and rounded_rate is calculated as 51857142.
It's close enough for it to work in practice, but with strict check
in the reverted commit, the mode is rejected needlessly in this case.
DT allows to specify a range of values for simple-panel/clock-frequency,
but driver doesn't respect that ATM. Given that TBS A711 is the single
user of sun4i-lvds driver, let's revert that commit for now, until
a better solution for the problem is found.
Also see: https://patchwork.kernel.org/patch/9446385/ for relevant
discussion (or search for "[RFC] drm/sun4i: rgb: Add 5% tolerance
to dot clock frequency check").
Fixes: e4e4b7ad50 ("drm/sun4i: add lvds mode_valid function")
Reported-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421045155.15332-1-megous@megous.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Most of the Allwinner SoCs since the A31 share the same MIPI-DSI
controller.
While that controller is mostly undocumented, the code is out there and has
been cleaned up in order to be integrated into DRM. However, there's still
some dark areas that are a bit unclear about how the block exactly
operates.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ad9e6224fced87c0889ddd2765d1942610061f72.1522835818.git-series.maxime.ripard@bootlin.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
Now that we have the guarantee that we will have only a single YUV plane,
actually support them. The way it works is not really straightforward,
since we first need to enable the YUV mode in the plane that we want to
setup, and then we have a few registers to setup the YUV buffer and
parameters.
We also need to setup the color correction to actually have something
displayed.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/66088c1398bd3189123f28a89a7ccc669fe9f296.1519931807.git-series.maxime.ripard@bootlin.com
The Allwinner A80 SoC has 2 documented TCONs. The display pipeline
diagram from the user manual shows a third TCON, but it's missing
an interrupt line, and its registers are not explained either.
It's also not used in Allwinner's vendor BSP.
The first TCON only has channel 0, for LCD panel output. The TCON
hardware setup is peculiar in that the eDP reset must also be
deasserted to allow access to the TCON. How the eDP module is wired
in the SoC itself is never explained.
The second TCON only has channel 1, and its output is connected to
the HDMI encoder block.
This patch adds a "needs_edp_reset" field to the tcon quirks structure,
and adds quirks and compatible strings for the 2 documented TCONs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180315114136.24747-4-wens@csie.org
Handle both positive and negative dclk polarity,
according to bus_flags, taking care of this:
On A20 and similar SoCs, the only way to achieve Positive Edge
(Rising Edge), is setting dclk clock phase to 2/3(240°).
By default TCON works in Negative Edge(Falling Edge), this is why phase
is set to 0 in that case.
Unfortunately there's no way to logically invert dclk through IO_POL
register.
The only acceptable way to work, triple checked with scope,
is using clock phase set to 0° for Negative Edge and set to 240° for
Positive Edge.
On A33 and similar SoCs there would be a 90° phase option, but it divides
also dclk by 2.
This patch is a way to avoid quirks all around TCON and DOTCLOCK drivers
for using A33 90° phase divided by 2 and consequently increase code
complexity.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1520963677-124239-1-git-send-email-giulio.benetti@micronovasrl.com
mode_valid function must be connected to encoder.
Otherwise it could get not be called by drm in the case there's a
bridge connected to encoder instead of a panel.
Move mode_valid function pointer to encoder helper functions,
changing its prototype according to encoder helper function pointer.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1520941017-81177-1-git-send-email-giulio.benetti@micronovasrl.com
Commit 070badfab7 ("drm/sun4i: call drm_vblank_init with correct number
of crtcs") has moved some code without updating the error handling gotos
accordingly.
Branch to the correct label and remove a now unused lablel.
Fixes: 070badfab7 ("drm/sun4i: call drm_vblank_init with correct number of crtcs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180311231909.5381-1-christophe.jaillet@wanadoo.fr
Currently the exclusivity is enabled when the rate is set by
the mode setting functions. These functions are called by
mode_set_nofb callback of drm_crc_helper. Then exclusivity
is disabled when tcon is disabled by atomic_disable
callback.
What happens is that mode_set_nofb can be called once when
mode changes, and afterwards the system can call atomic_enable
and atomic_disable multiple times without further calls to
mode_set_nofb.
This happens:
mode_set_nofb - clk exclusivity is enabled
atomic_enable
atomic_disable - clk exclusivity is disabled
atomic_enable
atomic_disable - clk exclusivity is already disabled, leading to WARN
in clk_rate_exclusive_put
Solution is to enable exclusivity in sun4i_tcon_channel_set_status.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180310110511.14697-1-megous@megous.com
Make sure that the CRTC code will call the enable/disable_vblank hooks.
Otherwise, since the refcounting will be off, we might end up in a
situation where the vblank management functions are called while the CRTC
is off.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-3-maxime.ripard@bootlin.com
In the case where mode_valid callback of our RGB connector was called
before mode_set was being called, the range of dividers would not be set,
resulting in a division by zero later on in the clk_round_rate logic.
Set the range of dividers before calling clk_round_rate to fix this.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-2-maxime.ripard@bootlin.com
The current logic to deal with old DT missing the LVDS properties doesn't
take into account whether the LVDS output is supported in the first place,
resulting in spurious error messages on SoCs where it doesn't even matter.
Introduce a new TCON flag to list if LVDS is supported at all to prevent
this from happening.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-1-maxime.ripard@bootlin.com
While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3
HDMI PHY is completely custom PHY.
However, they still have many things in common like clock and reset
setup, setting sync polarity and more.
Add support for H3 HDMI PHY variant.
While documentation exists for this PHY variant, it doesn't go in great
details. Because of that, almost all settings are copied from BSP linux
4.4. Interestingly, those settings are slightly different to those found
in a older BSP with Linux 3.4. For now, no user visible difference was
found between them.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-13-jernej.skrabec@siol.net
There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While
some things like clock and reset setup are the same, PHY configuration
differs a lot.
Split out code which is PHY specific to separate functions and create
a structure which holds pointers to those functions.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-11-jernej.skrabec@siol.net
Current polarity configuration code is cleary wrong since it compares
same flag two times. However, even if flag name is fixed, it won't work
well for resolutions which have one polarity positive and another
negative.
Fix that by properly set each bit according to each polarity. Since
those two bits are not described in any documentation, relationships
were obtained by experimentation.
Fixes: b7c7436a5f ("drm/sun4i: Implement A83T HDMI driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-10-jernej.skrabec@siol.net
Currently exclusive TCON clock lock is never released, which, for
example, prevents changing resolution on HDMI.
In order to fix that, release clock when disabling TCON. TCON is always
disabled first before new mode is set.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-7-jernej.skrabec@siol.net
I noticed that with 4.16-rc1 LVDS output on A83T based TBS A711 tablet doesn't
work (there's output but it's garbled). I compared some older patches for LVDS
support with the mainlined ones and this change is missing from mainline Linux.
I don't know what the register does exactly and the harcoded register value
doesn't inspire much confidence that it will work in a general case, so I'm
sending this RFC.
This patch fixes the issue on A83T.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222161217.23904-1-megous@megous.com
Since we now have a way to enforce the zpos, check for the number of alpha
planes, the only missing part is to assign our pipe automatically instead
of hardcoding it.
The algorithm is quite simple, but requires two iterations over the list of
planes.
In the first one (which is the same one that we've had to check for alpha,
the frontend usage, and so on), we order the planes by their zpos.
We can then do a second iteration over that array by ascending zpos
starting with the pipe 0. When and if we encounter our alpha plane, we put
it and all the other subsequent planes in the second pipe.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e9caf21d831438d36a3ccc7cef229c9a7ea7f69f.1518802627.git-series.maxime.ripard@bootlin.com
A83T has DW HDMI IP block with a custom PHY similar to Synopsys gen2
HDMI PHY.
Only video output was tested, while HW also supports audio and CEC.
Support for them will be added later.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-11-jernej.skrabec@siol.net
Some TCONs on newer SoCs doesn't support channel 0, since they are meant
to be used only with TV or HDMI encoder.
Prepare support for them with adding has_channel_0 quirk.
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-8-jernej.skrabec@siol.net
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlqDUjcACgkQlvcN/ahK
Bwp83Af8D805yWeS/rJ9pLaiaWmfuymMtZVl/IOEssElxFO4d+ya/S4HrcWJQwX6
KinIQiaytKKe3+TXhVRVVwg7nLBFXzaPey6SvFPCgSEa+Bm+b3v0Uk1ll59UfOzs
/IhwIYIvUSCqTVAccpoT8X/85JUQ3iP41RbdfbBwUtpvL+XLl/y29Pw1dtV71ZCH
I3/5zAk3odLd9LuPkyhtg+V1e8pluKlPVGZ0ElOiZ7HlKzc3ekOLNNj563LBHq8y
b2txi2+h/bfBx7PU5JfP6aOKGGameE79/3UExwW0dJJAHqU728KKs/7OaDu7w0vr
UlH0cY/Zc461ejPldXXx8hoKIxJ3bw==
=5EUv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.17:
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
* tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits)
drm/radeon: only enable swiotlb path when need v2
drm/amdgpu: only enable swiotlb alloc when need v2
drm: add func to get max iomem address v2
drm/vc4: Expose performance counters to userspace
drm: Print the pid when debug logging an ioctl error.
drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw
drm/stm: ltdc: add non-alpha color formats
drm/bridge/synopsys: dsi: Add 1.31 version support
drm/bridge/synopsys: dsi: Add read feature
drm/pl111: Support multiple endpoints on the CLCD
drm/pl111: Support variants with broken VBLANK
drm/pl111: Support variants with broken clock divider
drm/pl111: Handle the Versatile RGB/BGR565 mode
drm/pl111: Properly detect the ARM PL110 variants
drm/panel: Add support for ARM Versatile panels
drm/panel: Device tree bindings for ARM Versatile panels
drm/bridge: Rename argument from crtc to bridge
drm/crc: Add support for polling on the data fd.
drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle
drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle
...
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-2-ville.syrjala@linux.intel.com
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> #irc
-----BEGIN PGP SIGNATURE-----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=pLN1
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This seems to have been a comparatively quieter merge window, I assume
due to holidays etc. The "biggest" change is AMD header cleanups, which
merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
with the etnaviv driver wanting to reuse the code, hopefully other drivers
can go in the same direction.
Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
elsewhere.
Core:
- Add .last_close and .output_poll_changed helpers to reduce driver footprints
- Fix plane clipping
- Improved debug printing support
- Add panel orientation property
- Update edid derived properties at edid setting
- Reduction in fbdev driver footprint
- Move amdgpu scheduler into core for other drivers to use.
i915:
- Selftest and IGT improvements
- Fast boot prep work on IPS, pipe config
- HW workarounds for Cannonlake, Geminilake
- Cannonlake clock and HDMI2.0 fixes
- GPU cache invalidation and context switch improvements
- Display planes cleanup
- New PMU interface for perf queries
- New firmware support for KBL/SKL
- Geminilake HW workaround for perforamce
- Coffeelake stolen memory improvements
- GPU reset robustness work
- Cannonlake horizontal plane flipping
- GVT work
amdgpu/radeon:
- RV and Vega header file cleanups (lots of lines gone!)
- TTM operation context support
- 48-bit GPUVM support for Vega/RV
- ECC support for Vega
- Resizeable BAR support
- Multi-display sync support
- Enable swapout for reserved BOs during allocation
- S3 fixes on Raven
- GPU reset cleanup and fixes
- 2+1 level GPU page table
amdkfd:
- GFX7/8 SDMA user queues support
- Hardware scheduling for multiple processes
- dGPU prep work
rcar:
- Added R8A7743/5 support
- System suspend/resume support
sun4i:
- Multi-plane support for YUV formats
- A83T and LVDS support
msm:
- Devfreq support for GPU
tegra:
- Prep work for adding Tegra186 support
- Tegra186 HDMI support
- HDMI2.0 and zpos support by using generic helpers
tilcdc:
- Misc fixes
omapdrm:
- Support memory bandwidth limits
- DSI command mode panel cleanups
- DMM error handling
exynos:
- drop the old IPP subdriver.
etnaviv:
- Occlusion query fixes
- Job handling fixes
- Prep work for hooking in gpu scheduler
armada:
- Move closer to atomic modesetting
- Allow disabling primary plane if overlay is full screen
imx:
- Format modifier support
- Add tile prefetch to PRE
- Runtime PM support for PRG
ast:
- fix LUT loading"
* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
drm/ast: Load lut in crtc_commit
drm: Check for lessee in DROP_MASTER ioctl
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
...
Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaYNR8AAoJEEN0HIUfOBk0D+4P/RZp1HfstU+ilreTFO7odcRj
zMcqW/sLV+i315FQu1QytbRhaCB0/8qbBo6frEVB+4lw1ieMpYa67BDg+GqDjWlp
pn8FvlIBkH5B68IxYQo8BIiI4s96DbedHbd6XAKx4muqyQhlMnee7pDcT4xmcEiz
7h0VYSyOsiDIWIaOr/n2OdxZnm/VKIuwXHOKNwfVhCytoUnEL8ApkWSLn9UF/JtR
NgW5HseM2/calRZL1SBFlai/fOulAyXomuKIWYzxq8vaxpeEdt3S1O75hVsIbB1a
ZawZIVp/b8OEBoBwznmgxFrbdcJUtJ55mfdu7QeRsZMn84OyYNS1bH8YoVniMp0q
BjAW+YEiEW7FHXLrTlc0BfX8NtfxRod89LDXQPp/B6GlMOGmijQSCN5V1a2kzxt0
CrX/gypU3YNGqia7B9ya1/pbp8WJ1nUhDR8k5tzUAER4PZkTE8rcdttqP4OfCBsz
xLKG7VyccepyimTtgV6ckfOexaxass2dPH7L6WYC6rFRYW32q0P0XZ4baA9PXR8h
MlvH6+0CqpjqyQqmG9xeX5KRIy2aA6eviTkK/I/IBFI2GrdMRjetBcSjDPOesNPo
B/zrl1GTV+abjtsz/XqTEadvfJfXVBiGkgxYYXXO9qfS91hdqXmx1RZHN/sLwq3j
LWi5b0JM7jPuz9qT9rrG
=NLL4
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Fixes for 4.16:
Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.
* tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc:
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/panel: lvds: Handle the optional regulator case properly
drm/sun4i: Fix error code in sun4i_tcon_bind()
Fixes the following build warnings:
In file included from ../drivers/gpu/drm/sun4i/sun8i_mixer.h:18:0,
from ../drivers/gpu/drm/sun4i/sun8i_vi_scaler.h:13,
from ../drivers/gpu/drm/sun4i/sun8i_vi_scaler.c:12:
../drivers/gpu/drm/sun4i/sunxi_engine.h:36:16: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *old_state);
^~~~~~~~~~~~~~
../drivers/gpu/drm/sun4i/sunxi_engine.h:53:15: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *state);
^~~~~~~~~~~~~~
In file included from ../drivers/gpu/drm/sun4i/sun8i_mixer.h:18:0,
from ../drivers/gpu/drm/sun4i/sun8i_ui_scaler.h:12,
from ../drivers/gpu/drm/sun4i/sun8i_ui_scaler.c:12:
../drivers/gpu/drm/sun4i/sunxi_engine.h:36:16: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *old_state);
^~~~~~~~~~~~~~
../drivers/gpu/drm/sun4i/sunxi_engine.h:53:15: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *state);
^~~~~~~~~~~~~~
Fixes: 6b8562c86e ("drm/sun4i: engine: Create an atomic_begin
callback")
Fixes: 656e5f6549 ("drm/sun4i: engine: Add a custom crtc
atomic_check")
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122174306.231609-1-seanpaul@chromium.org
If we try to read the backend registers while it fetches the new values, we
end up with the value of some random register instead of the one we asked
for.
In order to prevent that, let's make sure that the very first thing we do
during our atomic modesetting is to let the commit bit come to a rest.
We don't have to worry about anything else since the only time we will
trigger a new transaction is during the atomic_commit which comes much
later.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/35604307e5bde2b85c674de79fa7c4d55700f085.1516613040.git-series.maxime.ripard@free-electrons.com
Now that we have everything in place, we can start enabling the frontend.
This is more difficult than one would assume since there can only be one
plane using the frontend per-backend.
We therefore need to make sure that the userspace will not try to setup
multiple planes using it, since that would be impossible. In order to
prevent that, we can create an atomic_check callback that will check that
only one plane will effectively make use of the frontend in a given
configuration, and will toggle the switch in that plane state so that the
proper setup function can do their role.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/278e6c514a8311750fe627c7f28d58b3e2cbd825.1516613040.git-series.maxime.ripard@free-electrons.com
Now that we have a driver, we can make use of it. This is done by
adding a flag to our custom plane state that will trigger whether we should
use the frontend on that particular plane or not.
The rest is just plumbing to set up the backend to not perform the DMA but
receive its data from the frontend.
Note that we're still not making any use of the frontend itself, as no one
is setting the flag yet.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cdffc25eab2d817820cc78cbd24f1f4b99902014.1516613040.git-series.maxime.ripard@free-electrons.com
We have some restrictions on what the planes and CRTC can provide that are
tied to only one generation of display engines.
For example, on the first generation, we can only have one YUV plane or one
plane that uses the frontend output.
Let's allow our engines to provide an atomic_check callback to validate the
current configuration.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e5f5f144e5c20d348cdb29933ae876c105bec017.1516613040.git-series.maxime.ripard@free-electrons.com
The function converting the DRM format to its equivalent in the backend
registers was assuming that we were having a plane.
However, we might want to use that function when setting up a plane using
the frontend, in which case we will not have a plane associated to the
backend's layer. Yet, we still need to setup the format to the one output
by the frontend.
Test for NULL plane pointers before referencing them, so that we can work
around it.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bfbe4c2e8525a7542526b648d59a8f3546e905f1.1516613040.git-series.maxime.ripard@free-electrons.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaW+iVAAoJEHm+PkMAQRiGCDsIAJALNpX7odTx/8y+yCSWbpBH
E57iwr4rmnI6tXJY6gqBUWTYnjAcf4b8IsHGCO6q3WIE3l/kt+m3eA21a32mF2Db
/bfPGTOWu5LoOnFqzgH2kiFuC3Y474toxpld2YtkQWYxi5W7SUtIHi/jGgkUprth
g15yPfwYgotJd/gpmPfBDMPlYDYvLlnPYbTG6ZWdMbg39m2RF2m0BdQ6aBFLHvbJ
IN0tjCM6hrLFBP0+6Zn60pevUW9/AFYotZn2ankNTk5QVCQm14rgQIP+Pfoa5WpE
I25r0DbkG2jKJCq+tlgIJjxHKD37GEDMc4T8/5Y8CNNeT9Q8si9EWvznjaAPazw=
=o5gx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc8' into drm-next
Linux 4.15-rc8
Daniel requested this for so the intel CI won't fall over on drm-next
so often.
It was only checking the divider when determing the closest match if
it could not match the requested rate exactly.
For a projector connected to an Olimex A20-OLinuXino-LIME using HDMI
with a native resolution of 1280x800 and pixel clock of 83.5 MHz, this
resulted in 1280x800 mode not being available and the following in dmesg
when the kernel is booted with drm.debug=0x3e:
[drm:drm_mode_debug_printmodeline] Modeline 37:"1280x800" 60 83500 1280 1352 1480 1680 800 810 816 831 0x48 0x5
[drm:drm_mode_prune_invalid] Not using 1280x800 mode: NOCLOCK
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-4-net147@gmail.com
It is possible that if there is no exact rate match and
"rounded = clk_hw_round_rate(parent, ideal)" gives high enough values
(e.g. if rounded is 2 * ideal) that the condition
"abs(rate - rounded / i) < abs(rate - best_parent / best_div)" is never
met and best_parent is never set. This results in req->rate and
req->best_parent_rate being assigned 0.
To avoid this, we set best_parent to the first calculated rate if it is
unset. The sun4i_tmds_calc_divider function already has a similar check.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-2-net147@gmail.com
When attached to the connector, the mode_valid callback will only filter
the modes provided by the connector itself as part of its probe.
However, it will not be doing it when the mode is provided by the
userspace, which still might result in a broken configuration.
In order to enforce these constraints, move our mode_valid callback to the
encoder which doesn't have this behaviour.
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[maxime: Wrote the commit log in order to update the patch from the merged
v3 to the v4 that was correct.]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0fa230a8-d01d-561a-f74f-6b4fd421255b@xs4all.nl
The commit 4c7f16d14a ("drm/sun4i: Fix TCON clock and regmap
initialization sequence") moved a bunch of logic around, but forgot to
update the gotos after the introduction of the err_free_dotclock label.
It means that if we fail later that the one introduced in that commit,
we'll just to the old label which isn't free the clock we created. This
will result in a breakage as soon as someone tries to do something with
that clock, since its resources will have been long reclaimed.
Cc: <stable@vger.kernel.org>
Fixes: 4c7f16d14a ("drm/sun4i: Fix TCON clock and regmap initialization sequence")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f83c1cebc731f0b4251f5ddd7b38c718cd79bb0b.1512662253.git-series.maxime.ripard@free-electrons.com
When I connected my cubieboard running 4.15-rc1 to my 4k display I got no
picture. Some digging found that there is no check against the upper
pixelclock limit of the HDMI output, so X selects a 4kp60 format at 594
MHz, which obviously won't work.
The patch below adds a check for the upper bound of what this hardware can
do, and it checks if the requested tmds clock can be obtained.
It also allows for the +/- 0.5% pixel clock variation that the HDMI spec permits.
That code is based on commit 22d0be2a55 ("drm: arcpgu: Allow some clock
deviation in crtc->mode_valid() callback") from Jose Abreu for drm/arc.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/162854cb-c7bd-d9ce-9fa0-9a6cd89c621b@xs4all.nl
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-15-noralf@tronnes.org
Basic principle of operation when using YUV framebuffer is that chroma
planes have to be upscaled to same size as luma.
Because of that, expand DE2 scaler library to support that.
BSP driver uses another set of FIR filter coefficients for YUV planes.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-26-jernej.skrabec@siol.net
DE2 have many CSC units - channel input CSC, channel output CSC and
mixer output CSC and maybe more.
Fortunately, they have all same register layout, only base offsets
differs.
Add support only for channel output CSC for now.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-24-jernej.skrabec@siol.net
Base addresses of channel output CSC (CCSC) depends whether mixer in
question is first or second and if it is second, if supports VEP or not.
This new property will tell which set of base addresses to take.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-23-jernej.skrabec@siol.net
No all SoCs support scaling on all channels. For example, V3s support
scaling only on VI channels. Because of that, add additional
configuration bitmask which tells which channel support scaler.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-21-jernej.skrabec@siol.net
This commit adds basic support for VI planes. They are meant for video
overlay and because of that they support YUV formats too. However, using
YUV format is not straightforward, so only RGB formats are supported for
now.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-20-jernej.skrabec@siol.net
Till now, DE2 driver supported only UI planes. Before we add support for
VI planes, lets split out UI layer specific code from common parts. This
commit does the following:
- renames sun8i_layer.c to sun8i_ui_layer.c
- moves UI channel specific code to sun8i_ui_layer.c
- moves common code from sun8i_layer.c to sun8i_mixer.c
- renames function and structure names so it is apparent where they
belong to
No functional change is made.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-19-jernej.skrabec@siol.net
There is no point having code which sets interlace mode of mixer in
channel related function. Interlace mode will only change when CRTC
state will change, so let's move it to the block which is executed only
when primary plane state is changed.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-16-jernej.skrabec@siol.net
Channel size should be set every time plane is changed, not only when
primary plane changes. Current code works only because only one
(primary) plane is supported at the moment.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-15-jernej.skrabec@siol.net
Line width is a property of a framebuffer and it belongs to
sun8i_mixer_update_layer_buffer(). This will became even more obvious
when support for multi-plane formats will be added.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-14-jernej.skrabec@siol.net
Now that we have properly clipped coordinates in plane state structure,
use them.
This also fixes bug where source x and y were adjusted for negative
value, but width and height weren't. It wasn't discovered because
primary plane usually doesn't have negative coordinates.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-13-jernej.skrabec@siol.net
Since current DE2 driver doesn't know how to scale yet, add atomic check
function which checks that.
Nice side effect of that function is that populates clipped coordinates
and checks visibility of the plane. That data will be used in the
future.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-12-jernej.skrabec@siol.net
Till now, plane selection was hardcoded to first overlay in first UI
channel and layer parameter is unused.
Rename and add parameters to layer functions so they would represent HW
more accurately and start using then.
It turns out that overlays don't fit well in current DRM design, because
they can't be blended together or scaled independetly when they are set
to same channel. Because of that, always use only first overlay in each
channel.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-11-jernej.skrabec@siol.net
If we want to support multiple planes in the future, code which enables
pipe has to be moved to appropriate place and it must depend on channel
id instead of being hardcoded.
Side effect of that rework is definition of default Z position. For now,
put first channel at the bottom, second above it and so on.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-10-jernej.skrabec@siol.net
Now that some knowledge of DE2 is gained, rename or add some macros to
make code more readable.
Max channel macro is removed, since it is not used and it is not clear
if it has right value. Structures in BSP driver shows possibility of 5
channels maximum although there is no SoC with such configuration.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-9-jernej.skrabec@siol.net
BSP driver always sets blend mode for all channels, no matter if they
are really used or not. Do the same here.
The exact meaning of the value is not exactly known, but BSP driver
mentions "SRC OVER" and by digging through code some more info can be
found.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-8-jernej.skrabec@siol.net
Premultiply and color key control registers are already set to zero by
initialization code few lines above. Furthermore, it seems that
colorkeying doesn't really work. It's not used in BSP driver and
experiments with it all failed.
Just remove the code.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-6-jernej.skrabec@siol.net
Current code sets alpha mode to global alpha mode and global alpha
value to 0xff which is totaly opaque. That is not needed for two
reasons:
- only one plane is active and thus it can be blended only with
background, which is black,
- it will hinder proper blending when more than one plane is supported
Default mode (0) considers pixel alpha value or 0xff if pixel has
no alpha information. Global alpha value is ignored in this case.
Because of that, just remove the code.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-4-jernej.skrabec@siol.net
