The HD-audio controller does system-suspend and resume operations by
directly calling its helpers __azx_runtime_suspend() and
__azx_runtime_resume(). However, in general, we don't have to resume
always the device fully at the system resume; typically, if a device
has been runtime-suspended, we can leave it to runtime resume.
Usually for achieving this, the driver would call
pm_runtime_force_suspend() and pm_runtime_force_resume() pairs in the
system suspend and resume ops. Unfortunately, this doesn't work for
the resume path in our case. For handling the jack detection at the
system resume, a child codec device may need the (literally) forcibly
resume even if it's been runtime-suspended, and for that, the
controller device must be also resumed even if it's been suspended.
This patch is an attempt to improve the situation. It replaces the
direct __azx_runtime_suspend()/_resume() calls with with
pm_runtime_force_suspend() and pm_runtime_force_resume() with a slight
trick as we've done for the codec side. More exactly:
- azx_has_pm_runtime() check is dropped from azx_runtime_suspend() and
azx_runtime_resume(), so that it can be properly executed from the
system-suspend/resume path
- The WAKEEN handling depends on the card's power state now; it's set
and cleared only for the runtime-suspend
- azx_resume() checks whether any codec may need the forcible resume
beforehand. If the forcible resume is required, it does temporary
PM refcount up/down for actually triggering the runtime resume.
- A new helper function, hda_codec_need_resume(), is introduced for
checking whether the codec needs a forcible runtime-resume, and the
existing code is rewritten with that.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, when the HD-audio controller driver doesn't detect any
codecs, it tries to abort the probe. But this abort happens at the
delayed probe, i.e. the primary probe call already returned success,
hence the driver is never unbound until user does so explicitly.
As a result, it may leave the HD-audio device in the running state
without the runtime PM. More badly, if the device is a HD-audio bus
that is tied with a GPU, GPU cannot reach to the full power down and
consumes unnecessarily much power.
This patch changes the logic after no-codec situation; it continues
probing without the further codec initialization but keep the
controller driver running normally.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Tested-by: Roy Spliet <nouveau@spliet.org>
Link: https://lore.kernel.org/r/20200413082034.25166-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd-hda-intel driver handles the most of its probe task in the delayed
work (either via workqueue or via firmware loader). When an error
happens in the later delayed probe, we can't deregister the device
itself because the probe callback already returned success and the
device was bound. So, for now, we set hda->init_failed flag and make
the rest untouched until the device gets really unbound.
However, this leaves the device up running, keeping the resources
without any use that prevents other operations.
In this patch, we release the resources at first when a probe error
happens in the delayed probe stage, but keeps the top-level object, so
that the PM and other ops can still refer to the object itself.
Also for simplicity, snd_hda_intel object is allocated via devm, so
that we can get rid of the explicit kfree calls.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At the error path of the firmware loading error, the driver tries to
release the card object and set NULL to drvdata. This may be referred
badly at the possible PM action, as the driver itself is still bound
and the PM callbacks read the card object.
Instead, we continue the probing as if it were no option set. This is
often a better choice than the forced abort, too.
Fixes: 5cb543dba9 ("ALSA: hda - Deferred probing with request_firmware_nowait()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the mapping check to build_connector_control() so that the device
specific quirk can provide the node to skip for the badly behaving
connector controls. As an example, ALC1220-VB-based codec implements
the skip entry for the broken SPDIF connector detection.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200412081331.4742-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mapping table may contain also ignore_ctl_error flag for devices
that are known to behave wild. Since this flag always writes the
card's own ignore_ctl_error flag, it overrides the value already set
by the module option, so it doesn't follow user's expectation.
Let's fix the code not to clear the flag that has been set by user.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200412081331.4742-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ignore_ctl_error option should filter the error at kctl accesses,
but there was an overlook: mixer_ctl_connector_get() returns an error
from the request.
This patch covers the forgotten code path and apply filter_error()
properly. The locking error is still returned since this is a fatal
error that has to be reported even with ignore_ctl_error option.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200412081331.4742-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Asus FX505DT with Realtek ALC233, the headset mic is connected
to pin 0x19, with default 0x411111f0.
Enable headset mic by reconfiguring the pin to an external mic
associated with the headphone on 0x21. Mic jack detection was also
found to be working.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207131
Signed-off-by: Adam Barber <barberadam995@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200410090032.2759-1-barberadam995@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small fixes gathered since the previous update.
* ALSA core:
- Regression fix for OSS PCM emulation
* ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
* Others
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped
from anyone's hands.
-----BEGIN PGP SIGNATURE-----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=mFJY
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered since the previous update.
ALSA core:
- Regression fix for OSS PCM emulation
ASoC:
- Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
- Lots of fixes for Intel-based devices
- Minor fixes for AMD, STM32, Qualcomm, Realtek
Others:
- Fixes for the bugs in mixer handling in HD-audio and ice1724
drivers that were caught by the recent kctl validator
- New quirks for HD-audio and USB-audio
Also this contains a fix for EDD firmware fix, which slipped from
anyone's hands"
* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda: Add driver blacklist
ALSA: usb-audio: Add mixer workaround for TRX40 and co
ALSA: hda/realtek - Add quirk for MSI GL63
ALSA: ice1724: Fix invalid access for enumerated ctl items
ALSA: hda: Fix potential access overflow in beep helper
ASoC: cs4270: pull reset GPIO low then high
ALSA: hda/realtek - Add HP new mute led supported for ALC236
ALSA: hda/realtek - Add supported new mute Led for HP
ASoC: rt5645: Add platform-data for Medion E1239T
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
ASoC: stm32: sai: Add missing cleanup
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
ASoC: Intel: atom: Fix uninitialized variable compiler warning
ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
ASoC: SOF: Turn "firmware boot complete" message into a dbg message
ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
ALSA: pcm: oss: Fix regression by buffer overflow fix
edd: Use scnprintf() for avoiding potential buffer overflow
...
Function soc_tplg_dai_config can fail, check for and handle possible
failure.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Function pcm_new_ver can fail, so we should check it's return value and
handle possible error.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Function soc_tplg_add_route can propagate error code from callback, we
should check its return value and handle fail in correct way.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Functions soc_tplg_denum_create, soc_tplg_dmixer_create,
soc_tplg_dbytes_create can fail, so their return values should be
checked and error should be propagated.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Function soc_tplg_create_tlv can fail, so we should check if it succeded
or not and proceed appropriately.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kstrdup is an allocation function and it can fail, so its return value
should be checked and handled appropriately.
In order to check all cases, we need to modify set_stream_info to return
a value, so check that everything went correctly when doing kstrdup().
Later add proper checks and error handlers.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of fixes that have been accumilated since the merge window,
mainly relating to x86 platform support.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl6N8tITHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0PEcB/9uSF5cBy7917NwXCJ6NuyVpKlytJPx
Abqf4bZ3WbhhONBBZ0VWvCqfW9KpiOsSiU3pngmNAGy/9DCirvhX5GUrHaiPHVN8
PeKqy4eGbB1Pj4qZ00HT12bDx3imPKHGmR+LCOXusnEn4vhW1gkfkLFWksiGM35d
lrmNCBKl90fRJC81dm3RUpH6gwnR5cosu15XhTKpKBqDQPraDWyjfmMNtQhKDpvB
/r+qmOYMCz0UM51yfsjEqAz88BYVmR6xjh3+tkaXU6hg6nacnBYy70ycGmDSoUpd
31WmjCZ6wZ74I0Fltybg6S3zuMYHoJfI19b8Z6rrGE2MiSFZKlohALes
=NRG8
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.7
A collection of fixes that have been accumilated since the merge window,
mainly relating to x86 platform support.
The recent AMD platform exposes an HD-audio bus but without any actual
codecs, which is internally tied with a USB-audio device, supposedly.
It results in "no codecs" error of HD-audio bus driver, and it's
nothing but a waste of resources.
This patch introduces a static blacklist table for skipping such a
known bogus PCI SSID entry. As of writing this patch, the known SSIDs
are:
* 1043:874f - ASUS ROG Zenith II / Strix
* 1462:cb59 - MSI TRX40 Creator
* 1462:cb60 - MSI TRX40
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some recent boards (supposedly with a new AMD platform) contain the
USB audio class 2 device that is often tied with HD-audio. The device
exposes an Input Gain Pad control (id=19, control=12) but this node
doesn't behave correctly, returning an error for each inquiry of
GET_MIN and GET_MAX that should have been mandatory.
As a workaround, simply ignore this node by adding a usbmix_name_map
table entry. The currently known devices are:
* 0414:a002 - Gigabyte TRX40 Aorus Pro WiFi
* 0b05:1916 - ASUS ROG Zenith II
* 0b05:1917 - ASUS ROG Strix
* 0db0:0d64 - MSI TRX40 Creator
* 0db0:543d - MSI TRX40
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The access to Analog Capture Source control value implemented in
prodigy_hifi.c is wrong, as caught by the recently introduced sanity
check; it should be accessing value.enumerated.item[] instead of
value.integer.value[]. This patch corrects the wrong access pattern.
Fixes: 6b8d6e5518 ("[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules Fortissimo IV")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The beep control helper function blindly stores the values in two
stereo channels no matter whether the actual control is mono or
stereo. This is practically harmless, but it annoys the recently
introduced sanity check, resulting in an error when the checker is
enabled.
This patch corrects the behavior to store only on the defined array
member.
Fixes: 0401e8548e ("ALSA: hda - Move beep helper functions to hda_beep.c")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull the RST line low then high when initializing the driver,
in order to force a reset of the chip.
Previously, the line was not pulled low, which could result in
the chip registers not resetting to their default values on boot.
Signed-off-by: Mike Willard <mwillard@izotope.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200401205454.79792-1-mwillard@izotope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HP new platform has new mute led feature.
COEF index 0x34 bit 5 to control playback mute led.
COEF index 0x35 bit 2 and bit 3 to control Mic mute led.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Note Book supported new mute Led.
Hardware PIN was not enough to meet old LED rule.
JD2 to control playback mute led.
GPO3 to control capture mute led.
(ALC285 didn't control GPO3 via verb command)
This two PIN just could control by COEF registers.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Medion E1239T uses the default jack-detect mode 3, but instead of
using an analog microphone it is using a DMIC on dmic-data-pin 1,
like other models following Intel's Brasswell's reference design.
This commit adds a DMI quirk pointing to the intel_braswell_platform_data
for this model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200402185257.3355-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MPMAN MPWIN895CL tablet almost fully works with out default settings.
The only problem is that it has only 1 speaker so any sounds only playing
on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200405133726.24154-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 0d6defc7e0 ("ASoC: stm32: sai: manage rebind issue")
converts some function calls to their non-devm equivalents. The
appropriate cleanup code was added to the remove function, but not
to the probe function. Add a call to snd_dmaengine_pcm_unregister
to compensate for the call to snd_dmaengine_pcm_register in case
of subsequent failure.
Fixes: commit 0d6defc7e0 ("ASoC: stm32: sai: manage rebind issue")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/1586099028-5104-1-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud
Alpha S (0951:16d8) uses two interfaces, but only the second
interface contains the capture stream. This patch delays the
registration until the second interface appears.
Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com>
Link: https://lore.kernel.org/r/20200404153843.9288-1-emmanuelpescosta099@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
GCC 10 gives a "variable might be used uninitialized" warning for the
block variable in sst_prepare_and_post_msg().
This is a false-positive warning, but lets fix it anyways.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200402185359.3424-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sst_fill_and_send_cmd_unlocked must be called with the drv->lock mutex
locked already. In the past there have been cases where this was not the
case, add a WARN_ON to check for drv->lock being locked.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200402185359.3424-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some
places it is called with the drv->lock mutex already held.
So it must always be called with the mutex locked. This commit adds missing
locking in the sst_set_be_modules() code-path.
Fixes: 24c8d14192 ("ASoC: Intel: mrfld: add DSP core controls")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200402185359.3424-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a Canon Lake machine with the SOF driver causes dmesg to fill
up with a ton of these messages:
[ 275.902194] sof-audio-pci 0000:00:1f.3: firmware boot complete
[ 351.529358] sof-audio-pci 0000:00:1f.3: firmware boot complete
[ 560.049047] sof-audio-pci 0000:00:1f.3: firmware boot complete
etc.
Since the DSP is powered down when not in used this happens everytime
e.g. a notification plays, polluting dmesg.
Turn this messages into a debug message, matching what the code already
does for the ""booting DSP firmware" message.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200402184948.3014-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE.
Input is not working.
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://lore.kernel.org/r/20200401095907.3387-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ This is essentially the same fix as commit ae769d3556, but it's
adapted to the latest code for 5.7; hence it contains no Fixes or
other tags for avoid backport confusion -- tiwai ]
The recent fix for the OOB access in PCM OSS plugins (commit
f2ecf903ef: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a
regression on OSS applications. The patch introduced the size check
in client and slave size calculations to limit to each plugin's buffer
size, but I overlooked that some code paths call those without
allocating the buffer but just for estimation.
This patch fixes the bug by skipping the size check for those code
paths while keeping checking in the actual transfer calls.
Link: https://lore.kernel.org/r/20200403073818.27943-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This became again a busy development cycle. There are a few ALSA
core updates (merely API cleanups and sparse fixes), while majority
of other changes are found in ASoC scene.
Here are some highlights:
* ALSA core:
- More helper macros for sparse warning fixes (e.g. bitwise types)
- Slight optimization of PCM OSS locks
- Make common handling for PCM / compress buffers (for SOF)
* ASoC:
- Lots of code refactoring and modernization for (still ongoing)
componentization works
- Conversion of SND_SOC_ALL_CODECS to use imply
- Continued refactoring and fixing of the Intel SOF/SST support,
including the initial (but still incomplete) SoundWire support
- SoundWire and more advanced clocking support for Realtek RT5682
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563
and TLV320ADCX140
* HD-audio:
- Optimizations in HDMI jack handling
- A few new quirks and fixups for Realtek codecs
* USB-audio:
- Delayed registration support
- New quirks for Motu, Kingston, Presonus
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl6Fr0oOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+MFA//XZD6a6sVDCp1JvcT4yLn+xcpXPgT/HC/pUJb
fH4T629gGUG2OGmEQXWf86c8UkrKjNsdkK5ZNjg6PlYagGZEO5RlQA35EV0/6QTK
hQuRu8ALuVUnQBrB+knQRnlfa8hzXIaXWkriNi0s6V04iAlLJB1XqZ8/ckq3kWs2
UqQ7vkTRODRAivdH0a4KcN2hENSvPfBkNTjhTn+Gp86FC3PIGbN6XqcZWM0rpXQ7
qi9H9jVbavRCpHTPiV5DSZ6JyqqL/pT3LQ4GZIAf+i+frMGTIurB/7VUVIIuCFGT
hf1MRrEFo47ox+7RyhJpgPPJxHhNdY+z7uUQDc/hoN1tDlLhGeS2Wjmy3soLZ172
yVbun2z6jfVgm5lyHMqDnY71nCUVAgSWZwFbBtKMroLkw06X3P8ahTmad7Pnnut0
XbrYt29aKOkuf+ejeMaUAtuyW0nKUg68DqlX8wP1RvO1bvY4kGrEkVj3K3ktNZEr
GeZFLDDSMumxxXduX8vv/O5Z6MOGhq/toGjnYwnIOyzKR8uLEbUI4DIptUMoelgK
b7zIMbLjeoZ4ckeUKNdbmEuhbrWZ3oM6owKCPt4D9EBunK9nu//cq2nsfGuJGBbT
Swa+POYH89Au/22pYS0q3/fMAbEHctove/hvFiWoMRa3fNA2My2rMWwyaIAeW1Gl
CAwOXk8=
=fAMQ
-----END PGP SIGNATURE-----
Merge tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This became again a busy development cycle. There are few ALSA core
updates (merely API cleanups and sparse fixes), with the majority of
other changes are found in ASoC scene.
Here are some highlights:
ALSA core:
- More helper macros for sparse warning fixes (e.g. bitwise types)
- Slight optimization of PCM OSS locks
- Make common handling for PCM / compress buffers (for SOF)
ASoC:
- Lots of code refactoring and modernization for (still ongoing)
componentization works
- Conversion of SND_SOC_ALL_CODECS to use imply
- Continued refactoring and fixing of the Intel SOF/SST support,
including the initial (but still incomplete) SoundWire support
- SoundWire and more advanced clocking support for Realtek RT5682
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563
and TLV320ADCX140
HD-audio:
- Optimizations in HDMI jack handling
- A few new quirks and fixups for Realtek codecs
USB-audio:
- Delayed registration support
- New quirks for Motu, Kingston, Presonus"
* tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor
Revert "ALSA: uapi: Drop asound.h inclusion from asoc.h"
ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups
ALSA: hda/realtek - Set principled PC Beep configuration for ALC256
ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256
ALSA: hda/realtek - a fake key event is triggered by running shutup
ALSA: hda: default enable CA0132 DSP support
ASoC: amd: acp3x-pcm-dma: clean up two indentation issues
ASoC: tlv320adcx140: Remove undocumented property
ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper function
ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver
ASoC: Intel: boards: add sof_sdw machine driver
ASoC: Intel: soc-acpi: update topology and driver name for SoundWire platforms
ASoC: rt5682: move DAI clock registry to I2S mode
ASoC: pxa: magician: convert to use i2c_new_client_device()
ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities
Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread
ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire
ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop quirks
ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt handlers
...
The audio setup on the Lenovo Carbon X1 8th gen is the same as that on
the Lenovo Carbon X1 7th gen, as such it needs the same
ALC285_FIXUP_THINKPAD_HEADSET_JACK quirk.
This fixes volume control of the speaker not working among other things.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1820196
Cc: stable@vger.kernel.org
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200402174311.238614-1-hdegoede@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If I2C is n but SoundWire is m, building fails:
sound/soc/codecs/rt5682.c:3716:1: warning: data definition has no type or storage class
module_i2c_driver(rt5682_i2c_driver);
^~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5682.c:3716:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int]
sound/soc/codecs/rt5682.c:3716:1: warning: parameter names (without types) in function declaration
Guard this use #ifdef CONFIG_I2C.
Fixes: 5549ea6479 ("ASoC: rt5682: fix unmet dependencies")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200401091055.34112-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_trigger_fe() allows start or stop after pause_push.
In dpcm_be_dai_trigger(), however, only pause_release is allowed
command after pause_push.
So, start or stop after pause in compress offload is always
returned as error if the compress offload is used with dpcm.
To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed
for start or stop command.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/01a301d60731$b724ea10$256ebe30$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment, playing audio with PulseAudio with the qdsp6 driver
results in distorted sound. It seems like its timer-based scheduling
does not work properly with qdsp6 since setting tsched=0 in
the PulseAudio configuration avoids the issue.
Apparently this happens when the pointer() callback is not accurate
enough. There is a SNDRV_PCM_INFO_BATCH flag that can be used to stop
PulseAudio from using timer-based scheduling by default.
According to https://www.alsa-project.org/pipermail/alsa-devel/2014-March/073816.html:
The flag is being used in the sense explained in the previous audio
meeting -- the data transfer granularity isn't fine enough but aligned
to the period size (or less).
q6asm-dai reports the position as multiple of
prtd->pcm_count = snd_pcm_lib_period_bytes(substream)
so it indeed just a multiple of the period size.
Therefore adding the flag here seems appropriate and makes audio
work out of the box.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200330175210.47518-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The Miditech MIDIFACE 16x16 (USB ID 1290:1749) has more than one extra
endpoint descriptor.
The first extra descriptor is: 0x06 0x30 0x00 0x00 0x00 0x00
As the code in snd_usbmidi_get_ms_info() looks only at the
first extra descriptor to find USB_DT_CS_ENDPOINT the device
as such is recognized but there is neither input nor output
configured.
The patch iterates through the extra descriptors to find the
proper one. With this patch the device is correctly configured.
Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Link: https://lore.kernel.org/r/1c3b431a86f69e1d60745b6110cdb93c299f120b.camel@domdv.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
patch_realtek.c has historically failed to properly configure the PC
Beep Hidden Register for the ALC256 codec (among others). Depending on
your kernel version, symptoms of this misconfiguration can range from
chassis noise, picked up by a poorly-shielded PCBEEP trace, getting
amplified and played on your internal speaker and/or headphones to loud
feedback, which responds to the "Headphone Mic Boost" ALSA control,
getting played through your headphones. For details of the problem, see
the patch in this series titled "ALSA: hda/realtek - Set principled PC
Beep configuration for ALC256", which fixes the configuration.
These symptoms have been most noticed on the Dell XPS 13 9350 and 9360,
popular laptops that use the ALC256. As a result, several model-specific
fixups have been introduced to try and fix the problem, the most
egregious of which locks the "Headphone Mic Boost" control as a hack to
minimize noise from a feedback loop that shouldn't have been there in
the first place.
Now that the underlying issue has been fixed, remove all these fixups.
Remaining fixups needed by the XPS 13 are all picked up by existing pin
quirks.
This change should, for the XPS 13 9350/9360
- Significantly increase volume and audio quality on headphones
- Eliminate headphone popping on suspend/resume
- Allow "Headphone Mic Boost" to be set again, making the headphone
jack fully usable as a microphone jack too.
Fixes: 8c69729b44 ("ALSA: hda - Fix headphone noise after Dell XPS 13 resume back from S3")
Fixes: 423cd78561 ("ALSA: hda - Fix headphone noise on Dell XPS 13 9360")
Fixes: e4c9fd10eb ("ALSA: hda - Apply headphone noise quirk for another Dell XPS 13 variant")
Fixes: 1099f48457 ("ALSA: hda/realtek: Reduce the Headphone static noise on XPS 9350/9360")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/b649a00edfde150cf6eebbb4390e15e0c2deb39a.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Realtek PC Beep Hidden Register[1] is currently set by
patch_realtek.c in two different places:
In alc_fill_eapd_coef(), it's set to the value 0x5757, corresponding to
non-beep input on 1Ah and no 1Ah loopback to either headphones or
speakers. (Although, curiously, the loopback amp is still enabled.) This
write was added fairly recently by commit e3743f431143 ("ALSA:
hda/realtek - Dell headphone has noise on unmute for ALC236") and is a
safe default. However, it happens in the wrong place:
alc_fill_eapd_coef() runs on module load and cold boot but not on S3
resume, meaning the register loses its value after suspend.
Conversely, in alc256_init(), the register is updated to unset bit 13
(disable speaker loopback) and set bit 5 (set non-beep input on 1Ah).
Although this write does run on S3 resume, it's not quite enough to fix
up the register's default value of 0x3717. What's missing is a set of
bit 14 to disable headphone loopback. Without that, we end up with a
feedback loop where the headphone jack is being driven by amplified
samples of itself[2].
This change eliminates the update in alc256_init() and replaces it with
the 0x5757 write from alc_fill_eapd_coef(). Kailang says that 0x5757 is
supposed to be the codec's default value, so using it will make
debugging easier for Realtek.
Affects the ALC255, ALC256, ALC257, ALC235, and ALC236 codecs.
[1] Newly documented in Documentation/sound/hd-audio/realtek-pc-beep.rst
[2] Setting the "Headphone Mic Boost" control from userspace changes
this feedback loop and has been a widely-shared workaround for headphone
noise on laptops like the Dell XPS 13 9350. This commit eliminates the
feedback loop and makes the workaround unnecessary.
Fixes: e1e8c1fdce ("ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/bf22b417d1f2474b12011c2a39ed6cf8b06d3bf5.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
As of commit:
ASoC: soc-core: care .ignore_suspend for Component suspend
function soc-core::snd_soc_suspend no longer ignores 'ignore_suspend'
flag for dai links. While BE dai link for System Pin is
supposed to follow standard suspend-resume flow, appended
'ignore_suspend' flag disturbs that flow and causes audio to break
right after resume. Remove the flag to address this.
Link to first message in conversation:
https://lkml.org/lkml/2020/3/18/54
Cezary Rojewski (4):
ASoC: Intel: broadwell: Remove ignore_suspend flag from SSP0 dai link
ASoC: Intel: haswell: Remove ignore_suspend flag from SSP0 dai link
ASoC: Intel: bdw-rt5677: Remove ignore_suspend flag from SSP0 dai link
ASoC: Intel: bdw-rt5650: Remove ignore_suspend flag from SSP0 dai link
sound/soc/intel/boards/bdw-rt5650.c | 1 -
sound/soc/intel/boards/bdw-rt5677.c | 1 -
sound/soc/intel/boards/broadwell.c | 1 -
sound/soc/intel/boards/haswell.c | 1 -
4 files changed, 4 deletions(-)
--
2.17.1
The addition of a single flag to track the DAI status prevents the DAI
startup sequence from being called on capture if the DAI is already
used for playback.
Fix by extending the existing code with one flag per direction.
Fixes: b56be800f1 ("ASoC: soc-pcm: call snd_soc_dai_startup()/shutdown() once")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200330160602.10180-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If regwshift is 32 and the selected architecture compiles '<<' operator
for signed int literal into rotating shift, '1<<regwshift' became 1 and
it makes regwmask to 0x0.
The literal is set to unsigned long to get intended regwmask.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/001001d60665$db7af3e0$9270dba0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As of commit:
ASoC: soc-core: care .ignore_suspend for Component suspend
function soc-core::snd_soc_suspend no longer ignores 'ignore_suspend'
flag for dai links. While BE dai link for System Pin is
supposed to follow standard suspend-resume flow, appended
'ignore_suspend' flag disturbs that flow and causes audio to break
right after resume. Remove the flag to address this.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200319204947.18963-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As of commit:
ASoC: soc-core: care .ignore_suspend for Component suspend
function soc-core::snd_soc_suspend no longer ignores 'ignore_suspend'
flag for dai links. While BE dai link for System Pin is
supposed to follow standard suspend-resume flow, appended
'ignore_suspend' flag disturbs that flow and causes audio to break
right after resume. Remove the flag to address this.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200319204947.18963-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As of commit:
ASoC: soc-core: care .ignore_suspend for Component suspend
function soc-core::snd_soc_suspend no longer ignores 'ignore_suspend'
flag for dai links. While BE dai link for System Pin is
supposed to follow standard suspend-resume flow, appended
'ignore_suspend' flag disturbs that flow and causes audio to break
right after resume. Remove the flag to address this.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200319204947.18963-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As of commit:
ASoC: soc-core: care .ignore_suspend for Component suspend
function soc-core::snd_soc_suspend no longer ignores 'ignore_suspend'
flag for dai links. While BE dai link for System Pin is
supposed to follow standard suspend-resume flow, appended
'ignore_suspend' flag disturbs that flow and causes audio to break
right after resume. Remove the flag to address this.
Link to first message in conversation:
https://lkml.org/lkml/2020/3/18/54
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200319204947.18963-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This avoids residual bit form previous format when the format is changed.
Hence, the resultant format is not an invalid one.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200328093921.32211-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The NULL check can be done gracefully without cast. It fixes a
compile warning like:
sound/soc/bcm/bcm63xx-pcm-whistler.c:184:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Fixes: 88eb404ccc ("ASoC: brcm: Add DSL/PON SoC audio driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200330135645.9707-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a very big update for the core since Morimoto-san has been
rather busy continuing his refactorings to clean up a lot of the cruft
that we have accumilated over the years. We've also gained several new
drivers, including initial (but still not complete) parts of the Intel
SoundWire support.
- Lots of refactorings to modernize the code from Morimoto-san.
- Conversion of SND_SOC_ALL_CODECS to use imply from Geert Uytterhoeven.
- Continued refactoring and fixing of the Intel support.
- Soundwire and more advanced clocking support for Realtek RT5682.
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and
TLV320ADCX140.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl6B03sTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Jm5B/4pb6Hz1ifM+ikR4qB7BOdm/UGzxWlD
Mng+qN3kh6Tx+x8/xnQRmfOnhFoKnDSTnlxcDr6ujAtz3bH+CKXbo2jjfvmagQrW
j87tYGdh6T38E6mf6543Eth3zJGphZYUY70REXt0HsaQ8bA912nrs5H8LTFiD2i+
lBJd/MmlCYL3gb/ftN9dpTfYYdxLy9HH9j5tR5zpLN3AD3Hew9jHqqX+ioAk+6lA
Nisbx5grP10pWFklYXyJlUFQOqMOYMtPMblLRA9bjqcEtL3quIXPXKkPNtTh+0Kf
5t7Q39RtVXJAk0DcatjMJUGAGQyM9r5g1Nk8WLB1LLv+NfLcO6cUpLAc
=+z/q
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.7
This is a very big update for the core since Morimoto-san has been
rather busy continuing his refactorings to clean up a lot of the cruft
that we have accumilated over the years. We've also gained several new
drivers, including initial (but still not complete) parts of the Intel
SoundWire support.
- Lots of refactorings to modernize the code from Morimoto-san.
- Conversion of SND_SOC_ALL_CODECS to use imply from Geert Uytterhoeven.
- Continued refactoring and fixing of the Intel support.
- Soundwire and more advanced clocking support for Realtek RT5682.
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and
TLV320ADCX140.
On the Lenovo X1C7 machines, after we plug the headset, the rt_resume()
and rt_suspend() of the codec driver will be called periodically, the
driver can't stay in the rt_suspend state even users doen't use the
sound card.
Through debugging, I found when running rt_suspend(), it will call
alc225_shutup(), in this function, it will change 3k pull down control
by alc_update_coef_idx(codec, 0x4a, 0, 3 << 10), this will trigger a
fake key event and that event will resume the codec, when codec
suspend agin, it will trigger the fake key event one more time, this
process will repeat.
If disable the key event before changing the pull down control, it
will not trigger fake key event. It also needs to restore the pull
down control and re-enable the key event, otherwise the system can't
get key event when codec is in rt_suspend state.
Also move some functions ahead of alc225_shutup(), this can save the
function declaration.
Fixes: 76f7dec08f (ALSA: hda/realtek - Add Headset Button supported for ThinkPad X1)
Cc: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200329082018.20486-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If SND_HDA_CODEC_CA0132 is enabled, the DSP support should be enabled as
well. Disabled DSP support leads to a hanging alsa system and no sound
output on the card otherwise. Tested on:
06:00.0 Audio device: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] (rev 01)
Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de>
Link: https://lore.kernel.org/r/20200329053710.4276-1-r.czerwinski@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To handle multiple hardware combinations, this patchset suggests a
single machine driver which will create and initialize dailinks
dynamically. This allows us to support new configurations easily, as
shown with the TigerLake rt5682 example.
Each configuration updates the card component string, and UCM can test
for the presence of components to configure them as needed.
Since we use a single the machine driver name, all previous ACPI
tables need to be updated. That should have no impact since the
machine drivers listed at the time were not upstreamed and are no
longer maintained.
Naveen Manohar (2):
ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver
ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper
function
Pierre-Louis Bossart (1):
ASoC: Intel: boards: add sof_sdw machine driver
Rander Wang (1):
ASoC: Intel: soc-acpi: update topology and driver name for SoundWire
platforms
sound/soc/intel/boards/Kconfig | 24 +
sound/soc/intel/boards/Makefile | 8 +-
sound/soc/intel/boards/sof_sdw.c | 962 ++++++++++++++++++
sound/soc/intel/boards/sof_sdw_common.h | 114 +++
sound/soc/intel/boards/sof_sdw_dmic.c | 42 +
sound/soc/intel/boards/sof_sdw_hdmi.c | 97 ++
sound/soc/intel/boards/sof_sdw_rt1308.c | 151 +++
sound/soc/intel/boards/sof_sdw_rt5682.c | 126 +++
sound/soc/intel/boards/sof_sdw_rt700.c | 125 +++
sound/soc/intel/boards/sof_sdw_rt711.c | 156 +++
sound/soc/intel/boards/sof_sdw_rt715.c | 42 +
.../intel/common/soc-acpi-intel-cml-match.c | 24 +-
.../intel/common/soc-acpi-intel-icl-match.c | 6 +-
.../intel/common/soc-acpi-intel-tgl-match.c | 30 +-
14 files changed, 1896 insertions(+), 11 deletions(-)
create mode 100644 sound/soc/intel/boards/sof_sdw.c
create mode 100644 sound/soc/intel/boards/sof_sdw_common.h
create mode 100644 sound/soc/intel/boards/sof_sdw_dmic.c
create mode 100644 sound/soc/intel/boards/sof_sdw_hdmi.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt1308.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt5682.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt700.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt711.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt715.c
--
2.20.1
There are a couple of statements that are not indented correctly,
add in the missing tab and break the lines to address a checkpatch
warning.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200327141429.269191-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Google Volteer device. As per new unified soundwire machine
driver, add rt5682-sdw helper function, which configures codec to Link0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This machine driver provides support for different configurations:
RT700, RT711, RT1308 (1x and 2x, I2S or SoundWire mode), and RT715
CometLake, Icelake, TigerLake.
PDM digital microphones
HDMI
To avoid introducing one driver per configuration, this common machine
driver relies on platform-specific information, tables and quirks to
dynamically create the relevant dailinks.
Unlike a lot of machine drivers, we use different DAI links for
SoundWire capture and playback since the Cadence PDIs can do capture
OR playback, not both simultaneously.
For each configuration, the card component string is updated so that UCM
can select the relevant parts.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update topology and reflect change to unified machine driver for SoundWire.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset provides the support for SoundWire support on Intel
CometLake, IcelLake and TigerLake RVP platforms and form-factor
devices to be released 'soon'.
The bulk of the code is about detecting a valid SoundWire
configuration from ACPI, and implementing the interfaces suggested in
'[PATCH 0/8] soundwire: remove platform devices, add SOF interfaces'
for interrupts, PCI wakes and clock-stop configurations.
Since that SoundWire series will not be in 5.7, the build support for
SOF w/ SoundWire is not provided for now, and fall-back functions will
be used. This code is tested on a daily basis in the SOF tree and is
not expected to change in significant ways.
Changes since v2:
Corrected error in ACPI table (thanks Amadeusz)
Added patch 11 to add reset cycle required on some SoundWire platforms
Bard Liao (1):
ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt
handlers
Pierre-Louis Bossart (8):
ASoC: soc-acpi: expand description of _ADR-based devices
ASoC: SOF: Intel: add SoundWire configuration interface
ASoC: SOF: IPC: dai-intel: move ALH declarations in header file
ASoC: SOF: Intel: hda: add SoundWire stream config/free callbacks
ASoC: SOF: Intel: hda: initial SoundWire machine driver autodetect
ASoC: SOF: Intel: hda: disable SoundWire interrupts on suspend
ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop
quirks
ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing
capabilities
Rander Wang (2):
ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire
Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread
include/sound/soc-acpi.h | 39 +-
include/sound/sof/dai-intel.h | 18 +-
.../intel/common/soc-acpi-intel-cml-match.c | 87 +++-
.../intel/common/soc-acpi-intel-icl-match.c | 97 ++++-
.../intel/common/soc-acpi-intel-tgl-match.c | 49 ++-
sound/soc/sof/intel/hda-ctrl.c | 25 +-
sound/soc/sof/intel/hda-dsp.c | 2 +
sound/soc/sof/intel/hda-loader.c | 31 ++
sound/soc/sof/intel/hda.c | 400 ++++++++++++++++++
sound/soc/sof/intel/hda.h | 66 +++
10 files changed, 750 insertions(+), 64 deletions(-)
--
2.20.1
The SoundWire mode doesn't need the DAI clocks.
Therefore, the DAI clock registry moves to I2S mode case.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200327073849.18291-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If pci device is in D0, wakeen interrupt will be
aggregated at cAVS level as interrupt. This commit
check the wakeen status and process it in irq thread
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a SoundWire link is in clock stop state, a Slave device may wake
up the Master for some events such as jack detection. The WAKEEN
interrupt will be triggered and processed by the audio pci device.
If audio device is in D3, the interrupt will be routed to PME, or
aggregated at cAVS level as interrupt when audio device is in D0. This
patch only supports D3 case, where the audio pci device will be
resumed by a PME event and the WAKEEN interrupt will be processed
after audio pci device is powered up and ROM is initialized
successfully.
The WAKEEN handling is only enabled after the first boot due to
dependencies on a shim_lock mutex being initialized.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a single irq handler for SOF interrupts. We can further merge
SoundWire ones to completely remove MSI interrupts handling issues
leading to timeouts.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Doing this avoid conflicts and errors reported on the bus.
The interrupts are only re-enabled on resume after the firmware is
downloaded, so the behavior is not fully symmetric
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For now we have a limited number of machine driver configurations, and
we can detect them based on the link configuration returned after
checking hardware and firmware (BIOS) configurations.
The link configuration is checked with a link_mask as well as a list
of _ADR descriptors for each link.
There is a chance that in extreme cases where the BIOS contains too
much information we would need to detect which Slave devices actually
report as 'attached'. This would be more accurate than static
table-based solutions, but it also introduces timing dependencies
since we don't know when those devices might become attached, so will
only be only be looked at if we see limitations with static methods
and the usual quirks based e.g. on DMI information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These callbacks are invoked when a matching hw_params/hw_free() DAI
operation takes place, and will result in IPC operations with the SOF
firmware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the SoundWire core supports the multi-step initialization,
call the relevant APIs.
The actual hardware enablement can be done in two places, ideally we'd
want to startup the SoundWire IP as soon as possible (while still
taking power rail dependencies into account)
However when suspend/resume is implemented, the DSP device will be
resumed first, and only when the DSP firmware is downloaded/booted
would the SoundWire child devices be resumed, so there are only
marginal benefits in starting the IP earlier for the first probe.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire, we need to know if endpoints needs to be 'aggregated'
(MIPI parlance, meaning logically grouped), e.g. when two speaker
amplifiers need to be handled as a single logical output.
We don't necessarily have the information at the firmware (BIOS)
level, so add a notion of endpoints and specify if a device/endpoint
is part of a group, with a position.
This may be expanded in future solutions, for now only provide a group
and position information.
Since we modify the header file, change all existing upstream tables
as well to avoid breaking compilation/bisect.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
