Requested bits for UMR support
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On my raven1 system (rev c6) with VBIOS 113-RAVEN-114 GFXOFF is
not stable (resulting in large block tiling noise in some applications).
Disabling GFXOFF via the quirk list fixes the problems for me.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since for sriov, baco happens on host side, no need and meaning
to judge is baco.
also, since kiq reads strap0 in here, if kiq is not ready
or gpu reset(kiq resume) happens after this read, would fail
to read and wrongly set baco as true(1).
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 0b718ba1e8.
There are still some residual issues with asynchronous binding and
execution, but since commit 92581f9fb9 ("drm/i915: Immediately execute
the fenced work") we prefer not to use asynchronous binds, and the
remaining issues do not seem restricted to Cherryview [at least the ones
seen over a few dozen CI runs, less frequent issues are sure to be
discovered!]
These issues seem to be mitigated, if not eliminated entirely, by the
previous commit 84eac0c659 ("drm/i915/gt: Force pte cacheline to main
memory").
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200510102431.21959-3-chris@chris-wilson.co.uk
We have problems of tgl not seeing a valid pte entry when iommu is
enabled. Add heavy handed flushing of entry modification by flushing the
cpu, cacheline and then wcb. This forces the pte out to main memory past
this point regarless of promises of coherency.
This is an evolution of an experimental patch from Chris Wilson of adding
wmb for coherent partners, by adding a clflush to force the cache->memory
step.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1840
Testcase: igt/gem_exec_fence/parallel
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511160803.15407-1-mika.kuoppala@linux.intel.com
Be consistent, and even when we know we had used a WC, flush the mapped
object after writing into it. The flush understands the mapping type and
will only clflush if !I915_MAP_WC, but will always insert a wmb [sfence]
so that we can be sure that all writes are visible.
v2: Add the unconditional wmb so we are know that we always flush the
writes to memory/HW at that point.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511141304.599-1-chris@chris-wilson.co.uk
Be consistent and ensure that we always emit the asynchronous waits
prior to issuing instructions that use the address. This ensures that if
we do emit GPU commands to do the await, they are before our use!
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200510102431.21959-1-chris@chris-wilson.co.uk
Storing the connector instance in struct mga_device avoids some
dynamic memory allocation. On errors, the connector's initializer
function now destroys the i2c structure. Done in preparation of
converting mgag200 to simple-KMS helpers.
v2:
* improved commit message (Michael)
* fixed error message for mgag200_vga_connector_init() (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-7-tzimmermann@suse.de
Mode configuration is now cleanued up automatically. While at it,
move all mode-config code into mgag200_mode.c. Done in preparation
of switching mgag200 to simple-KMS helpers.
v2:
* improve commit message (Sam)
* rebased during cherry pick
* also move bpp_shift initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-5-tzimmermann@suse.de
Done in preparation of embedding the DRM device in struct mga_device.
This patch makes the patch for embedding more readable.
v2:
* improved commit message (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-3-tzimmermann@suse.de
Mgag200 uses dev_private to look up struct mga_device for instances
of struct drm_device. Use of dev_private is deprecated, so hide it in
the helper function to_mga_device().
v2:
* make to_mga_device() a function (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-2-tzimmermann@suse.de
Get rid of several platform specific variants of
intel_digital_port_connected() and just use the ISR bits we've
stashed away.
v2: Duplicate stuff to avoid exposing platform specific
functions across files (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311155422.3043-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Instead of constnantly having to figure out which hpd status bit
array to use let's store them under dev_priv.
Should perhaps take this further and stash even more stuff to
make the hpd handling more abstract yet.
v2: Remeber cnp (Imre)
Add MISSING_CASE() for unknown PCHs (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507114808.6150-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Let's get rid of the platform if ladders in
intel_digital_port_connected() and make it a vfunc. Now the if
ladders are at the encoder initialization which makes them a bit
less convoluted.
v2: Add forward decl for intel_encoder in intel_tc.h
v3: Duplicate stuff to avoid exposing platform specific
functions across files (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311155422.3043-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
GLK wants the +1 adjustement for the "blocks per line" value
for x-tile/y-tile, just like cnl+.
Also the x-tile and linear cases are almost identical. The only
difference is this +1 which is always done for glk+, and only
done for linear on skl/bxt. Let's unify it to a single branch
with a special case for the +1, just like we do for y-tile.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430125822.21985-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Just tidy up the return handling for completed dma-fences. While it may
return errors for invalid fence, we already know that we have a good
fence and the only error will be an already signaled fence.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511075722.13483-5-chris@chris-wilson.co.uk
Commit fb5970da1b ("drm/i915/gt: Use the kernel_context to measure the
breadcrumb size") removed the last external user for intel_timeline_init.
Mark it static.
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511102201.9275-1-mika.kuoppala@linux.intel.com
No other functions use the return value of pxa168fb_init_mode() and the
return value is always 0 now. Make it return void. This fixes the
following coccicheck warning:
drivers/video/fbdev/pxa168fb.c:565:5-8: Unneeded variable: "ret". Return
"0" on line 597
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed indent]
Link: https://patchwork.freedesktop.org/patch/msgid/20200506061745.19451-1-yanaijie@huawei.com
Fix the following sparse warning:
drivers/gpu/drm/i2c/tda998x_drv.c:1136:5: warning:
symbol 'tda998x_audio_digital_mute' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1588819768-11818-1-git-send-email-zou_wei@huawei.com
People use panel-simple when they have panels that are builtin to
their device. In these cases the HPD (Hot Plug Detect) signal isn't
really used for hotplugging devices but instead is used for power
sequencing. Panel timing diagrams (especially for eDP panels) usually
have the HPD signal in them and it acts as an indicator that the panel
is ready for us to talk to it.
Sometimes the HPD signal is hooked up to a normal GPIO on a system.
In this case we need to poll it in the correct place to know that the
panel is ready for us. In some system designs the right place for
this is panel-simple.
When adding this support, we'll account for the case that there might
be a circular dependency between panel-simple and the provider of the
GPIO. The case this was designed for was for the "ti-sn65dsi86"
bridge chip. If HPD is hooked up to one of the GPIOs provided by the
bridge chip then in our probe function we'll always get back
-EPROBE_DEFER. Let's handle this by allowing this GPIO to show up
late if we saw -EPROBE_DEFER during probe. NOTE: since the
gpio_get_optional() is used, if the "hpd-gpios" isn't there our
variable will just be NULL and we won't do anything in prepare().
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.3.I53fed5b501a31e7a7fa13268ebcdd6b77bd0cadd@changeid
All info I could find about this panel show that it behaves the same
as the BOE NV133FHM-N61. However, it definitely appears to be a
unique panel because reading the EDID shows "NV133FHM-N62". We'll add
a string match for the new panel but until we find something unique
about it we'll just point at the N61's structures.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.3.I525ebd471f5340a6a369af7bde06ef04174d2f41@changeid
The BOE NV133FHM-N61 is documented in the original commit to be a
13.3" panel, but the size listed in our struct doesn't match.
Specifically:
math.sqrt(30.0 * 30.0 + 18.7 * 18.7) / 2.54 ==> 13.92
Searching around on the Internet shows that the size that was in the
structure was the "Outline Size", not the "Display Area". Let's fix
it.
Also the Internet says that this panel supports 262K colors. That's
6bpp, not 8bpp.
Fixes: b0c664cc80 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.1.I4d29651c0837b4095fb4951253f44036a371732f@changeid
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507185408.GA14561@embeddedor
Expose the hardcoded timeout for unsignaled foreign fences as a Kconfig
option, primarily to allow brave systems to disable the timeout and
solely rely on correct signaling.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200509105021.12542-1-chris@chris-wilson.co.uk
The downside of using semaphores is that we lose metadata passing
along the signaling chain. This is particularly nasty when we
need to pass along a fatal error such as EFAULT or EDEADLK. For
fatal errors we want to scrub the request before it is executed,
which means that we cannot preload the request onto HW and have
it wait upon a semaphore.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508092933.738-3-chris@chris-wilson.co.uk
To allow faster engine to engine synchronization, peel the layer of
dma-fence-chain to expose potential i915 fences so that the
i915_request code can emit HW semaphore wait/signal operations in the
ring which is faster than waking up the host to submit unblocked
workloads after interrupt notification.
This is similar to the peeling we do for e.g. dma_fence_array.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508185448.29709-1-chris@chris-wilson.co.uk
We only need to set DPM_FLAG_NEVER_SKIP for the legacy ATPX
BOCO case. D3cold and BACO work as expected.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should be checking whether the driver enabled runtime pm
rather than whether the asic supports BOCO or BACO. That said
in general they are equivalent unless the user has disabled
runpm or it has been disabled for a specific asic.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as gfx9. This allows us to kill the waves for hung
shaders.
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create sysfs file using attributes.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BACO is needed to support hibernate on Navi1X.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
physical_node_id * node_segment_size should be the
dram_base_address for current gpu node in xgmi config
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drop IP specific psp function for rlc autoload since
the autoload_supported was introduced to mark ASICs
that support rlc_autoload
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cure posion command was replaced by ras recovery
solution and was not a formal command supported
by ras ta anymore
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TRIGGER_ERROR is common ras ta command for all the
ASICs that support RAS feature. switch to common helper
to avoid duplicate implementation per IP generation
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_hive_id/get_node_id/get_topology_info/set_topology_info
are common xgmi command supported by TA for all the ASICs
that support xgmi link. They should be implemented as common
helper functions to avoid duplicated code per IP generation
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As a means for a small code consolidation, but primarily to start
thinking more carefully about internal-vs-external linkage, pull the
pair of i915_sw_fence_await_dma_fence() calls into a common routine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508092933.738-2-chris@chris-wilson.co.uk
While we ordinarily do not skip submit-fences due to the accompanying
hook that we want to callback on execution, a submit-fence on the same
timeline is meaningless.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508092933.738-1-chris@chris-wilson.co.uk
Make an additional note on DRM format modifiers for x and y tiling. These
format modifiers are defined for BDW+ platforms and therefore definition
is not valid for older gens. This is due to address swizzling for tiled
surfaces is no longer used. For newer platforms main memory controller has
a more effective address swizzling algorithm.
v2: Rephrase comment (Daniel)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200506120827.12250-1-mika.kahola@intel.com
Suspending failed because there's no mode if the CRTC is being
disabled. Early-out in this case. This fixes runtime PM for ast.
v3:
* fixed commit message
v2:
* added Tested-by/Reported-by tags
* added Fixes tags and CC (Sam)
* improved comment
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Cary Garrett <cogarre@gmail.com>
Tested-by: Cary Garrett <cogarre@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: b48e1b6ffd ("drm/ast: Add CRTC helpers for atomic modesetting")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090640.21561-1-tzimmermann@suse.de
