This patch adds block count by in-place-update in stat.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch cleans up parameters on IO paths.
The key idea is to use f2fs_io_info adding a parameter, block address, and then
use this structure as parameters.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's add readahead code for reading contiguous compact/normal summary blocks
in checkpoint, then we will gain better performance in mount procedure.
Changes from v1
o remove inappropriate 'unlikely' in npages_for_summary_flush.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now we use inmemory pages for atomic write only and provide abort procedure,
we don't need to truncate them explicitly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds two new ioctls to release inmemory pages grabbed by atomic
writes.
o f2fs_ioc_abort_volatile_write
- If transaction was failed, all the grabbed pages and data should be written.
o f2fs_ioc_release_volatile_write
- This is to enhance the performance of PERSIST mode in sqlite.
In order to avoid huge memory consumption which causes OOM, this patch changes
volatile writes to use normal dirty pages, instead blocked flushing to the disk
as long as system does not suffer from memory pressure.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
To improve recovery speed, f2fs try to readahead many contiguous blocks in warm
node segment, but for most time, abnormal power-off do not occur frequently, so
when mount a normal power-off f2fs image, by contrary ra so many blocks and then
invalid them will hurt the performance of mount.
It's better to just ra the first next-block for normal condition.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As inline_{dir,inode} stat is increased/decreased concurrently by multi threads,
so the value is not so accurate, let's use atomic type for counting accurately.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch revists retrial paths in f2fs.
The basic idea is to use cond_resched instead of retrying from the very early
stage.
Suggested-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previoulsy, we used rwlock for nat_entry lock.
But, now we have a lot of complex operations in set_node_addr.
(e.g., allocating kernel memories, handling radix_trees, and so on)
So, this patches tries to change spinlock to rw_semaphore to give CPUs to other
threads.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now in f2fs, we have three inode cache: ORPHAN_INO, APPEND_INO, UPDATE_INO,
and we manage fields related to inode cache separately in struct f2fs_sb_info
for each inode cache type.
This makes codes a bit messy, so that this patch intorduce a new struct
inode_management to wrap inner fields as following which make codes more neat.
/* for inner inode cache management */
struct inode_management {
struct radix_tree_root ino_root; /* ino entry array */
spinlock_t ino_lock; /* for ino entry lock */
struct list_head ino_list; /* inode list head */
unsigned long ino_num; /* number of entries */
};
struct f2fs_sb_info {
...
struct inode_management im[MAX_INO_ENTRY]; /* manage inode cache */
...
}
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a system wants to reduce the booting time as a top priority, now we can
use a mount option, -o fastboot.
With this option, f2fs conducts a little bit slow write_checkpoint, but
it can avoid the node page reads during the next mount time.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
__submit_merged_bio f2fs_write_end_io f2fs_write_end_io
wait_io = X wait_io = x
complete(X) complete(X)
wait_io = NULL
wait_for_completion()
free(X)
spin_lock(X)
kernel panic
In order to avoid this, this patch removes the wait_io facility.
Instead, we can use wait_on_all_pages_writeback(sbi) to wait for end_ios.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch simplifies the inline_data usage with the following rule.
1. inline_data is set during the file creation.
2. If new data is requested to be written ranges out of inline_data,
f2fs converts that inode permanently.
3. There is no cases which converts non-inline_data inode to inline_data.
4. The inline_data flag should be changed under inode page lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Rename f2fs_set/clear_bit to f2fs_test_and_set/clear_bit, which mean
set/clear bit and return the old value, for better readability.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce f2fs_change_bit to simplify the change bit logic in
function set_to_next_nat{sit}.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use clear_inode_flag to replace the redundant cond_clear_inode_flag.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces f2fs_dentry_ptr structure for the use of a function
parameter in inline_dentry operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a core function, f2fs_fill_dentries, to remove
redundant code in f2fs_readdir and f2fs_read_inline_dir.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, init_inode_metadata does not hold any parent directory's inode
page. So, f2fs_init_acl can grab its parent inode page without any problem.
But, when we use inline_dentry, that page is grabbed during f2fs_add_link,
so that we can fall into deadlock condition like below.
INFO: task mknod:11006 blocked for more than 120 seconds.
Tainted: G OE 3.17.0-rc1+ #13
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mknod D ffff88003fc94580 0 11006 11004 0x00000000
ffff880007717b10 0000000000000002 ffff88003c323220 ffff880007717fd8
0000000000014580 0000000000014580 ffff88003daecb30 ffff88003c323220
ffff88003fc94e80 ffff88003ffbb4e8 ffff880007717ba0 0000000000000002
Call Trace:
[<ffffffff8173dc40>] ? bit_wait+0x50/0x50
[<ffffffff8173d4cd>] io_schedule+0x9d/0x130
[<ffffffff8173dc6c>] bit_wait_io+0x2c/0x50
[<ffffffff8173da3b>] __wait_on_bit_lock+0x4b/0xb0
[<ffffffff811640a7>] __lock_page+0x67/0x70
[<ffffffff810acf50>] ? autoremove_wake_function+0x40/0x40
[<ffffffff811652cc>] pagecache_get_page+0x14c/0x1e0
[<ffffffffa029afa9>] get_node_page+0x59/0x130 [f2fs]
[<ffffffffa02a63ad>] read_all_xattrs+0x24d/0x430 [f2fs]
[<ffffffffa02a6ca2>] f2fs_getxattr+0x52/0xe0 [f2fs]
[<ffffffffa02a7481>] f2fs_get_acl+0x41/0x2d0 [f2fs]
[<ffffffff8122d847>] get_acl+0x47/0x70
[<ffffffff8122db5a>] posix_acl_create+0x5a/0x150
[<ffffffffa02a7759>] f2fs_init_acl+0x29/0xcb [f2fs]
[<ffffffffa0286a8d>] init_inode_metadata+0x5d/0x340 [f2fs]
[<ffffffffa029253a>] f2fs_add_inline_entry+0x12a/0x2e0 [f2fs]
[<ffffffffa0286ea5>] __f2fs_add_link+0x45/0x4a0 [f2fs]
[<ffffffffa028b5b6>] ? f2fs_new_inode+0x146/0x220 [f2fs]
[<ffffffffa028b816>] f2fs_mknod+0x86/0xf0 [f2fs]
[<ffffffff811e3ec1>] vfs_mknod+0xe1/0x160
[<ffffffff811e4b26>] SyS_mknod+0x1f6/0x200
[<ffffffff81741d7f>] tracesys+0xe1/0xe6
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Adds Functions to implement inline dir init/lookup/insert/delete/convert ops.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: remove needless reserved area copy, pointed by Dan Carpenter]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch exports some dir operations for inline dir, additionally introduces
f2fs_drop_nlink from f2fs_delete_entry for reusing by inline dir function.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch defines macro/inline dentry structure, and adds some helpers for
inline dir infrastructure.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds support for volatile writes which keep data pages in memory
until f2fs_evict_inode is called by iput.
For instance, we can use this feature for the sqlite database as follows.
While supporting atomic writes for main database file, we can keep its journal
data temporarily in the page cache by the following sequence.
1. open
-> ioctl(F2FS_IOC_START_VOLATILE_WRITE);
2. writes
: keep all the data in the page cache.
3. flush to the database file with atomic writes
a. ioctl(F2FS_IOC_START_ATOMIC_WRITE);
b. writes
c. ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
4. close
-> drop the cached data
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a very limited functionality for atomic write support.
In order to support atomic write, this patch adds two ioctls:
o F2FS_IOC_START_ATOMIC_WRITE
o F2FS_IOC_COMMIT_ATOMIC_WRITE
The database engine should be aware of the following sequence.
1. open
-> ioctl(F2FS_IOC_START_ATOMIC_WRITE);
2. writes
: all the written data will be treated as atomic pages.
3. commit
-> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
: this flushes all the data blocks to the disk, which will be shown all or
nothing by f2fs recovery procedure.
4. repeat to #2.
The IO pattens should be:
,- START_ATOMIC_WRITE ,- COMMIT_ATOMIC_WRITE
CP | D D D D D D | FSYNC | D D D D | FSYNC ...
`- COMMIT_ATOMIC_WRITE
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch relocates f2fs_unlock_op in every directory operations to be called
after any error was processed.
Otherwise, the checkpoint can be entered with valid node ids without its
dentry when -ENOSPC is occurred.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs tries to reorganize the dirty nat entries into multiple sets
according to its nid ranges. This can improve the flushing nat pages, however,
if there are a lot of cached nat entries, it becomes a bottleneck.
This patch introduces a new set management flow by removing dirty nat list and
adding a series of set operations when the nat entry becomes dirty.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces FITRIM in f2fs_ioctl.
In this case, f2fs will issue small discards and prefree discards as many as
possible for the given area.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add a new data structure to control checkpoint parameters.
Currently, it presents the reason of checkpoint such as is_umount and normal
sync.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If same data is updated multiple times, we don't need to redo whole the
operations.
Let's just update the lastest one.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch revisited whole the recovery information during the f2fs_sync_file.
In this patch, there are three information to make a decision.
a) IS_CHECKPOINTED, /* is it checkpointed before? */
b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */
c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */
And, the scenarios for our rule are based on:
[Term] F: fsync_mark, D: dentry_mark
1. inode(x) | CP | inode(x) | dnode(F)
2. inode(x) | CP | inode(F) | dnode(F)
3. inode(x) | CP | dnode(F) | inode(x) | inode(F)
4. inode(x) | CP | dnode(F) | inode(F)
5. CP | inode(x) | dnode(F) | inode(DF)
6. CP | inode(DF) | dnode(F)
7. CP | dnode(F) | inode(DF)
8. CP | dnode(F) | inode(x) | inode(DF)
For example, #3, the three conditions should be changed as follows.
inode(x) | CP | dnode(F) | inode(x) | inode(F)
a) x o o o o
b) x x x x o
c) x o o x o
If f2fs_sync_file stops ------^,
it should write inode(F) --------------^
So, the need_inode_block_update should return true, since
c) get_nat_flag(e, HAS_LAST_FSYNC), is false.
For example, #8,
CP | alloc | dnode(F) | inode(x) | inode(DF)
a) o x x x x
b) x x x o
c) o o x o
If f2fs_sync_file stops -------^,
it should write inode(DF) --------------^
Note that, the roll-forward policy should follow this rule, which means,
if there are any missing blocks, we doesn't need to recover that inode.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, all the dnode pages should be read during the roll-forward recovery.
Even worsely, whole the chain was traversed twice.
This patch removes that redundant and costly read operations by using page cache
of meta_inode and readahead function as well.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If user wrote F2FS_IPU_FSYNC:4 in /sys/fs/f2fs/ipu_policy, f2fs_sync_file
only starts to try in-place-updates.
And, if the number of dirty pages is over /sys/fs/f2fs/min_fsync_blocks, it
keeps out-of-order manner. Otherwise, it triggers in-place-updates.
This may be used by storage showing very high random write performance.
For example, it can be used when,
Seq. writes (Data) + wait + Seq. writes (Node)
is pretty much slower than,
Rand. writes (Data)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously f2fs only counts dirty dentry pages, but there is no reason not to
expand the scope.
This patch changes the names on the management of dirty pages and to count
dirty pages in each inode info as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We use flush cmd control to collect many flush cmds, and flush them
together. In this case, we use two list to manage the flush cmds
(collect and dispatch), and one spin lock is used to protect this.
In fact, the lock-less list(llist) is very suitable to this case,
and we use simplify this routine.
-
v2:
-use llist_for_each_entry_safe to fix possible use-after-free issue.
-remove the unused field from struct flush_cmd.
Thanks for Yu's suggestion.
-
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In commit aec71382c6 ("f2fs: refactor flush_nat_entries codes for reducing NAT
writes"), we descripte the issue as below:
"Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time."
Actually, we have the same problem in using SIT journal area.
In this patch, firstly we will update sit journal with dirty entries as many as
possible. Secondly if there is no space in sit journal, we will remove all
entries in journal and walk through the whole dirty entry bitmap of sit,
accounting dirty sit entries located in same SIT block to sit entry set. All
entry sets are linked to list sit_entry_set in sm_info, sorted ascending order
by count of entries in set. Later we flush entries in set which have fewest
entries into journal as many as we can, and then flush dense set with merged
entries to disk.
In this way we can use sit journal area more effectively, also we will reduce
SIT update, result in gaining in performance and saving lifetime of flash
device.
In my testing environment, it shows this patch can help to reduce SIT block
update obviously.
virtual machine + hard disk:
fsstress -p 20 -n 400 -l 5
sit page num cp count sit pages/cp
based 2006.50 1349.75 1.486
patched 1566.25 1463.25 1.070
Our latency of merging op is small when handling a great number of dirty SIT
entries in flush_sit_entries:
latency(ns) dirty sit count
36038 2151
49168 2123
37174 2232
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
I think we need to let the dirty node pages remain in the page cache instead
of rewriting them in their places.
So, after done with successful recovery, write_checkpoint will flush all of them
through the normal write path.
Through this, we can avoid potential error cases in terms of block allocation.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The init_inode_metadata calls truncate_blocks when error is occurred.
The callers holds f2fs_lock_op, so we should not call it again in
truncate_blocks.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
