Commit Graph

824400 Commits

Author SHA1 Message Date
Yashaswini Raghuram Prathivadi Bhayankaram
26069b448e ice: Set LAN_EN for all directional rules
The LAN_EN bit for a switch rule determines if the packet can go out
on the wire or not. Set the LAN_EN flag in the switch action for all
directional rules.

Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:20:05 -07:00
Christopher N Bednarz
b58dafbc6f ice: Do not set LB_EN for prune switch rules
LB_EN for prune switch rules was causing all TX traffic
to loopback to the internal switch and dropped.  When
running bi-directional stress workloads with RDMA
the RDPU would hang blocking tx and rx traffic.

Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:17 -07:00
Yashaswini Raghuram Prathivadi Bhayankaram
277b3a4547 ice: Enable LAN_EN for the right recipes
In VEB mode, enable LAN_EN bit in the action fields for filter rules
corresponding to the right recipes.

Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:17 -07:00
Akeem G Abodunrin
5eda8afd6b ice: Add support for PF/VF promiscuous mode
Implement support for VF promiscuous mode, MAC/VLAN/MAC_VLAN and PF
multicast MAC/VLAN/MAC_VLAN promiscuous mode.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:17 -07:00
Victor Raj
e1ca65a3cc ice: code cleanup in ice_sched.c
This patch does some clean up in the Tx scheduler code:

1. Adjust the stack variable usage
2. Modify the debug prints to display the FW error
3. Add additional debug prints while adding/removing VSIs

Signed-off-by: Victor Raj <victor.raj@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:17 -07:00
Anirudh Venkataramanan
eb86b09491 ice: Remove unused vsi_id field
Remove unused vsi_id field from struct ice_sched_vsi_info.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:17 -07:00
Bruce Allan
c8b7abdd7d ice: fix some function prototype and signature style issues
Put the return type on a separate line for function prototypes and
signatures that would exceed the 80-character limit if both were on
the same line.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:17 -07:00
Kiran Patil
60dcc39ea3 ice: fix the divide by zero issue
Static analysis flagged a potential divide by zero error because
vsi->num_rxq can become zero in certain condition and it is used as
divisor.

Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:17 -07:00
Akeem G Abodunrin
5743020d37 ice: Fix issue reconfiguring VF queues
When VF requested for queues changes, we need to update LAN Tx queue with
correct number of VF queue pairs and re-allocate VF resources based on
this new requested number of queues, which is constraint within maximum
queue supported per VF.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:17 -07:00
Anirudh Venkataramanan
23d21c3dbb ice: Remove unused function prototype
Commit 7c710869d6 ("ice: Add handlers for VF netdevice operations")
seems to have inadvertently introduced a function prototype for
ice_set_vf_bw that isn't implemented. Remove it.

Fixes: 7c710869d6 ("ice: Add handlers for VF netdevice operations")

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:17 -07:00
Bruce Allan
1b5c19c779 ice: fix static analysis warnings
cppcheck warns "Identical condition '<var>', second condition is always
false". Fix them.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:16 -07:00
Akeem G Abodunrin
7eeac88976 ice: Fix issue reclaiming resources back to the pool after reset
This patch fixes issue reclaiming VF resources back to the pool after
reset - Since we only allocate HW vector for all VFs and track together
with resources allocation for PF with ice_search_res, we need to free VFs
resources separately, using first VF vector index to traverse the list.
Otherwise tracker starts from the last assigned vectors list and causes
maximum supported number of HW vectors, 1024 to be exhausted, depending on
the number of VFs enabled, which causes a lot of unwanted issues, and
failed to reassign vectors for VFs.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:16 -07:00
Akeem G Abodunrin
cb93a9529d ice: Enable MAC anti-spoof by default
This patch enables MAC anti-spoof by default, with creation of VF VSIs or
when the VF VSIs are being re-initialized.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22 08:19:16 -07:00
Johannes Berg
3b0f31f2b8 genetlink: make policy common to family
Since maxattr is common, the policy can't really differ sanely,
so make it common as well.

The only user that did in fact manage to make a non-common policy
is taskstats, which has to be really careful about it (since it's
still using a common maxattr!). This is no longer supported, but
we can fake it using pre_doit.

This reduces the size of e.g. nl80211.o (which has lots of commands):

   text	   data	    bss	    dec	    hex	filename
 398745	  14323	   2240	 415308	  6564c	net/wireless/nl80211.o (before)
 397913	  14331	   2240	 414484	  65314	net/wireless/nl80211.o (after)
--------------------------------
   -832      +8       0    -824

Which is obviously just 8 bytes for each command, and an added 8
bytes for the new policy pointer. I'm not sure why the ops list is
counted as .text though.

Most of the code transformations were done using the following spatch:
    @ops@
    identifier OPS;
    expression POLICY;
    @@
    struct genl_ops OPS[] = {
    ...,
     {
    -	.policy = POLICY,
     },
    ...
    };

    @@
    identifier ops.OPS;
    expression ops.POLICY;
    identifier fam;
    expression M;
    @@
    struct genl_family fam = {
            .ops = OPS,
            .maxattr = M,
    +       .policy = POLICY,
            ...
    };

This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing
the cb->data as ops, which we want to change in a later genl patch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22 10:38:23 -04:00
Heiner Kallweit
601ed4d6dc r8169: use netif_start_queue instead of netif_wake_qeueue in rtl8169_start_xmit
Replace the call to netif_wake_queue in rtl8169_start_xmit with
netif_start_queue as we don't need to actually wake up the queue since
we are still in mid transmit so we just need to reset the bit so it
doesn't prevent the next transmit.
(Description shamelessly copied from a mail sent by Alex.)

Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22 10:35:25 -04:00
Heiner Kallweit
110a2432c5 net: phy: aquantia: add downshift support
Aquantia PHY's of the AQR107 family support the downshift feature.
Add support for it as standard PHY tunable so that it can be controlled
via ethtool.
The AQCS109 supports a proprietary 2-pair 1Gbps mode. If two such PHY's
are connected to each other with a 2-pair cable, they may not be able
to establish a link if both advertise modes > 1Gbps.

v2:
- add downshift event detection
- warn if downshift occurred
- read downshifted rate from vendor register
- enable downshift per default on all AQR107 family members

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22 10:26:21 -04:00
David S. Miller
1d965c4def Merge branch 'Refactor-flower-classifier-to-remove-dependency-on-rtnl-lock'
Vlad Buslov says:

====================
Refactor flower classifier to remove dependency on rtnl lock

Currently, all netlink protocol handlers for updating rules, actions and
qdiscs are protected with single global rtnl lock which removes any
possibility for parallelism. This patch set is a third step to remove
rtnl lock dependency from TC rules update path.

Recently, new rtnl registration flag RTNL_FLAG_DOIT_UNLOCKED was added.
TC rule update handlers (RTM_NEWTFILTER, RTM_DELTFILTER, etc.) are
already registered with this flag and only take rtnl lock when qdisc or
classifier requires it. Classifiers can indicate that their ops
callbacks don't require caller to hold rtnl lock by setting the
TCF_PROTO_OPS_DOIT_UNLOCKED flag. The goal of this change is to refactor
flower classifier to support unlocked execution and register it with
unlocked flag.

This patch set implements following changes to make flower classifier
concurrency-safe:

- Implement reference counting for individual filters. Change fl_get to
  take reference to filter. Implement tp->ops->put callback that was
  introduced in cls API patch set to release reference to flower filter.

- Use tp->lock spinlock to protect internal classifier data structures
  from concurrent modification.

- Handle concurrent tcf proto deletion by returning EAGAIN, which will
  cause cls API to retry and create new proto instance or return error
  to the user (depending on message type).

- Handle concurrent insertion of filter with same priority and handle by
  returning EAGAIN, which will cause cls API to lookup filter again and
  process it accordingly to netlink message flags.

- Extend flower mask with reference counting and protect masks list with
  masks_lock spinlock.

- Prevent concurrent mask insertion by inserting temporary value to
  masks hash table. This is necessary because mask initialization is a
  sleeping operation and cannot be done while holding tp->lock.

Both chain level and classifier level conflicts are resolved by
returning -EAGAIN to cls API that results restart of whole operation.
This retry mechanism is a result of fine-grained locking approach used
in this and previous changes in series and is necessary to allow
concurrent updates on same chain instance. Alternative approach would be
to lock the whole chain while updating filters on any of child tp's,
adding and removing classifier instances from the chain. However, since
most CPU-intensive parts of filter update code are specifically in
classifier code and its dependencies (extensions and hw offloads), such
approach would negate most of the gains introduced by this change and
previous changes in the series when updating same chain instance.

Tcf hw offloads API is not changed by this patch set and still requires
caller to hold rtnl lock. Refactored flower classifier tracks rtnl lock
state by means of 'rtnl_held' flag provided by cls API and obtains the
lock before calling hw offloads. Following patch set will lift this
restriction and refactor cls hw offloads API to support unlocked
execution.

With these changes flower classifier is safely registered with
TCF_PROTO_OPS_DOIT_UNLOCKED flag in last patch.

Changes from V2 to V3:
- Rebase on latest net-next

Changes from V1 to V2:
- Extend cover letter with explanation about retry mechanism.
- Rebase on current net-next.
- Patch 1:
  - Use rcu_dereference_raw() for tp->root dereference.
  - Update comment in fl_head_dereference().
- Patch 2:
  - Remove redundant check in fl_change error handling code.
  - Add empty line between error check and new handle assignment.
- Patch 3:
  - Refactor loop in fl_get_next_filter() to improve readability.
- Patch 4:
  - Refactor __fl_delete() to improve readability.
- Patch 6:
  - Fix comment in fl_check_assign_mask().
- Patch 9:
  - Extend commit message.
  - Fix error code in comment.
- Patch 11:
  - Fix fl_hw_replace_filter() to always release rtnl lock in error
    handlers.
- Patch 12:
  - Don't take rtnl lock before calling __fl_destroy_filter() in
    workqueue context.
  - Extend commit message with explanation why flower still takes rtnl
    lock before calling hardware offloads API.

Github: <https://github.com/vbuslov/linux/tree/unlocked-flower-cong3>
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
9214919006 net: sched: flower: set unlocked flag for flower proto ops
Set TCF_PROTO_OPS_DOIT_UNLOCKED for flower classifier to indicate that its
ops callbacks don't require caller to hold rtnl lock. Don't take rtnl lock
in fl_destroy_filter_work() that is executed on workqueue instead of being
called by cls API and is not affected by setting
TCF_PROTO_OPS_DOIT_UNLOCKED. Rtnl mutex is still manually taken by flower
classifier before calling hardware offloads API that has not been updated
for unlocked execution.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
c24e43d83b net: sched: flower: track rtnl lock state
Use 'rtnl_held' flag to track if caller holds rtnl lock. Propagate the flag
to internal functions that need to know rtnl lock state. Take rtnl lock
before calling tcf APIs that require it (hw offload, bind filter, etc.).

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
3d81e7118d net: sched: flower: protect flower classifier state with spinlock
struct tcf_proto was extended with spinlock to be used by classifiers
instead of global rtnl lock. Use it to protect shared flower classifier
data structures (handle_idr, mask hashtable and list) and fields of
individual filters that can be accessed concurrently. This patch set uses
tcf_proto->lock as per instance lock that protects all filters on
tcf_proto.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
272ffaadeb net: sched: flower: handle concurrent tcf proto deletion
Without rtnl lock protection tcf proto can be deleted concurrently. Check
tcf proto 'deleting' flag after taking tcf spinlock to verify that no
concurrent deletion is in progress. Return EAGAIN error if concurrent
deletion detected, which will cause caller to retry and possibly create new
instance of tcf proto.

Retry mechanism is a result of fine-grained locking approach used in this
and previous changes in series and is necessary to allow concurrent updates
on same chain instance. Alternative approach would be to lock the whole
chain while updating filters on any of child tp's, adding and removing
classifier instances from the chain. However, since most CPU-intensive
parts of filter update code are specifically in classifier code and its
dependencies (extensions and hw offloads), such approach would negate most
of the gains introduced by this change and previous changes in the series
when updating same chain instance.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
9a2d938998 net: sched: flower: handle concurrent filter insertion in fl_change
Check if user specified a handle and another filter with the same handle
was inserted concurrently. Return EAGAIN to retry filter processing (in
case it is an overwrite request).

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
259e60f967 net: sched: flower: protect masks list with spinlock
Protect modifications of flower masks list with spinlock to remove
dependency on rtnl lock and allow concurrent access.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
195c234d15 net: sched: flower: handle concurrent mask insertion
Without rtnl lock protection masks with same key can be inserted
concurrently. Insert temporary mask with reference count zero to masks
hashtable. This will cause any concurrent modifications to retry.

Wait for rcu grace period to complete after removing temporary mask from
masks hashtable to accommodate concurrent readers.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Suggested-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
f48ef4d5b0 net: sched: flower: add reference counter to flower mask
Extend fl_flow_mask structure with reference counter to allow parallel
modification without relying on rtnl lock. Use rcu read lock to safely
lookup mask and increment reference counter in order to accommodate
concurrent deletes.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
b2552b8c40 net: sched: flower: track filter deletion with flag
In order to prevent double deletion of filter by concurrent tasks when rtnl
lock is not used for synchronization, add 'deleted' filter field. Check
value of this field when modifying filters and return error if concurrent
deletion is detected.

Refactor __fl_delete() to accept pointer to 'last' boolean as argument,
and return error code as function return value instead. This is necessary
to signal concurrent filter delete to caller.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
061775583e net: sched: flower: introduce reference counting for filters
Extend flower filters with reference counting in order to remove dependency
on rtnl lock in flower ops and allow to modify filters concurrently.
Reference to flower filter can be taken/released concurrently as soon as it
is marked as 'unlocked' by last patch in this series. Use atomic reference
counter type to make concurrent modifications safe.

Always take reference to flower filter while working with it:
- Modify fl_get() to take reference to filter.
- Implement tp->put() callback as fl_put() function to allow cls API to
release reference taken by fl_get().
- Modify fl_change() to assume that caller holds reference to fold and take
reference to fnew.
- Take reference to filter while using it in fl_walk().

Implement helper functions to get/put filter reference counter.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
620da48608 net: sched: flower: refactor fl_change
As a preparation for using classifier spinlock instead of relying on
external rtnl lock, rearrange code in fl_change. The goal is to group the
code which changes classifier state in single block in order to allow
following commits in this set to protect it from parallel modification with
tp->lock. Data structures that require tp->lock protection are mask
hashtable and filters list, and classifier handle_idr.

fl_hw_replace_filter() is a sleeping function and cannot be called while
holding a spinlock. In order to execute all sequence of changes to shared
classifier data structures atomically, call fl_hw_replace_filter() before
modifying them.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Vlad Buslov
e474619a24 net: sched: flower: don't check for rtnl on head dereference
Flower classifier only changes root pointer during init and destroy. Cls
API implements reference counting for tcf_proto, so there is no danger of
concurrent access to tp when it is being destroyed, even without protection
provided by rtnl lock.

Implement new function fl_head_dereference() to dereference tp->root
without checking for rtnl lock. Use it in all flower function that obtain
head pointer instead of rtnl_dereference().

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:32:17 -07:00
Jakub Kicinski
31f1a0e37c nfp: remove defines for unused control bits
NFP driver ABI contains bits for L2 switching which were never
implemented in initially envisioned form.

Remove the defines, and open up the possibility of
reclaiming the bits for other uses.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:01:55 -07:00
David S. Miller
143eb9ac9f Merge branch 'rhashtable-cleanups'
NeilBrown says:

====================
Two clean-ups for rhashtable.

These two patches make small improvements to
rhashtable, but are otherwise unrelated.

Thanks to Herbert, Miguel, and Paul for the review.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:01:10 -07:00
NeilBrown
f7ad68bf98 rhashtable: rename rht_for_each*continue as *from.
The pattern set by list.h is that for_each..continue()
iterators start at the next entry after the given one,
while for_each..from() iterators start at the given
entry.

The rht_for_each*continue() iterators are documented as though the
start at the 'next' entry, but actually start at the given entry,
and they are used expecting that behaviour.
So fix the documentation and change the names to *from for consistency
with list.h

Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:01:10 -07:00
NeilBrown
4feb7c7a4f rhashtable: don't hold lock on first table throughout insertion.
rhashtable_try_insert() currently holds a lock on the bucket in
the first table, while also locking buckets in subsequent tables.
This is unnecessary and looks like a hold-over from some earlier
version of the implementation.

As insert and remove always lock a bucket in each table in turn, and
as insert only inserts in the final table, there cannot be any races
that are not covered by simply locking a bucket in each table in turn.

When an insert call reaches that last table it can be sure that there
is no matchinf entry in any other table as it has searched them all, and
insertion never happens anywhere but in the last table.  The fact that
code tests for the existence of future_tbl while holding a lock on
the relevant bucket ensures that two threads inserting the same key
will make compatible decisions about which is the "last" table.

This simplifies the code and allows the ->rehash field to be
discarded.

We still need a way to ensure that a dead bucket_table is never
re-linked by rhashtable_walk_stop().  This can be achieved by calling
call_rcu() inside the locked region, and checking with
rcu_head_after_call_rcu() in rhashtable_walk_stop() to see if the
bucket table is empty and dead.

Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 14:01:10 -07:00
David S. Miller
83b038db25 Merge branch 'net-phy-Move-Omega-PHY-entry-to-Cygnus-PHY-driver'
Florian Fainelli says:

====================
net: phy: Move Omega PHY entry to Cygnus PHY driver

In order to pave the way for adding some specific Omega PHY features
that may not be desirable on other products covered by the bcm7xxx PHY
driver, split the Omega PHY entry into the Cygnus PHY driver such that
the PHY drivers are reflective of product lines/business units
maintaining them within Broadcom.

No functional changes intended.
====================

Acked-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:41:52 -07:00
Florian Fainelli
17cc982176 net: phy: Move Omega PHY entry to Cygnus PHY driver
Cygnus and Omega are part of the same business unit and product line, it
makes sense to group PHY entries by products such that a platform can
select only the drivers that it needs. Bring all the functionality that
the BCM7XXX_28NM_GPHY() macro hides for us and remove the Omega PHY
entry from bcm7xxx.c.

As an added bonus, we now have a proper mdio_device_id entry to permit
auto-loading.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:41:26 -07:00
Florian Fainelli
f878fe5685 net: phy: Prepare for moving Omega out of bcm7xxx
The Omega PHY entry was added to bcm7xxx.c out of convenience and this
breaks the one driver per product line paradigm that was applied up
until now. Since the AFE initialization is shared between Omega and
BCM7xxx move the relevant functions to bcm-phy-lib.[ch]. No functional
changes introduced.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:41:26 -07:00
Julian Wiedmann
02afc7ad45 net: dst: remove gc leftovers
Get rid of some obsolete gc-related documentation and macros that were
missed in commit 5b7c9a8ff8 ("net: remove dst gc related code").

CC: Wei Wang <weiwan@google.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:39:25 -07:00
David S. Miller
88f808f312 Merge branch 'net-broadcom-Remove-print-of-base-address'
Florian Fainelli says:

====================
net: broadcom: Remove print of base address

Some broadcom MDIO/switch/Ethernet MAC drivers insist on printing the
base register virtual address which has little value.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:32:35 -07:00
Florian Fainelli
62be757fbe net: systemport: Remove print of base address
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
pointers are being hashed when printed. Displaying the virtual memory at
bootup time is not helpful, especially given we use a dev_info() which
already displays the platform device's address.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:32:35 -07:00
Florian Fainelli
fbb7bc45ea net: dsa: bcm_sf2: Remove print of base address
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
pointers are being hashed when printed. Displaying the virtual memory at
bootup time is not helpful, we use a dev_info() print which already
displays the platform device's address.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:32:35 -07:00
Florian Fainelli
647aed232a net: phy: mdio-bcm-unimac: Remove print of base address
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
pointers are being hashed when printed. Displaying the virtual memory at
bootup time is not helpful, especially given we use a dev_info() which
already displays the platform device's address.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:32:35 -07:00
David Ahern
10585b4342 ipv6: Remove fallback argument from ip6_hold_safe
net and null_fallback are redundant. Remove null_fallback in favor of
!net check.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:30:34 -07:00
David Ahern
9ab948a91b ipv4: Allow amount of dirty memory from fib resizing to be controllable
fib_trie implementation calls synchronize_rcu when a certain amount of
pages are dirty from freed entries. The number of pages was determined
experimentally in 2009 (commit c3059477fc).

At the current setting, synchronize_rcu is called often -- 51 times in a
second in one test with an average of an 8 msec delay adding a fib entry.
The total impact is a lot of slow down modifying the fib. This is seen
in the output of 'time' - the difference between real time and sys+user.
For example, using 720,022 single path routes and 'ip -batch'[1]:

    $ time ./ip -batch ipv4/routes-1-hops
    real    0m14.214s
    user    0m2.513s
    sys     0m6.783s

So roughly 35% of the actual time to install the routes is from the ip
command getting scheduled out, most notably due to synchronize_rcu (this
is observed using 'perf sched timehist').

This patch makes the amount of dirty memory configurable between 64k where
the synchronize_rcu is called often (small, low end systems that are memory
sensitive) to 64M where synchronize_rcu is called rarely during a large
FIB change (for high end systems with lots of memory). The default is 512kB
which corresponds to the current setting of 128 pages with a 4kB page size.

As an example, at 16MB the worst interval shows 4 calls to synchronize_rcu
in a second blocking for up to 30 msec in a single instance, and a total
of almost 100 msec across the 4 calls in the second. The trade off is
allowing FIB entries to consume more memory in a given time window but
but with much better fib insertion rates (~30% increase in prefixes/sec).
With this patch and net.ipv4.fib_sync_mem set to 16MB, the same batch
file runs in:

    $ time ./ip -batch ipv4/routes-1-hops
    real    0m9.692s
    user    0m2.491s
    sys     0m6.769s

So the dead time is reduced to about 1/2 second or <5% of the real time.

[1] 'ip' modified to not request ACK messages which improves route
    insertion times by about 20%

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:29:53 -07:00
Kirill Tkhai
12132768dc tun: Remove unused first parameter of tun_get_iff()
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:19:15 -07:00
Kirill Tkhai
0c3e0e3bb6 tun: Add ioctl() TUNGETDEVNETNS cmd to allow obtaining real net ns of tun device
In commit f2780d6d74 "tun: Add ioctl() SIOCGSKNS cmd to allow
obtaining net ns of tun device" it was missed that tun may change
its net ns, while net ns of socket remains the same as it was
created initially. SIOCGSKNS returns net ns of socket, so it is
not suitable for obtaining net ns of device.

We may have two tun devices with the same names in two net ns,
and in this case it's not possible to determ, which of them
fd refers to (TUNGETIFF will return the same name).

This patch adds new ioctl() cmd for obtaining net ns of a device.

Reported-by: Harald Albrecht <harald.albrecht@gmx.net>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 13:19:15 -07:00
David S. Miller
28b18b39c5 Merge branch 'ipv6-Change-addrconf_f6i_alloc-to-use-ip6_route_info_create'
David Ahern says:

====================
ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create

addrconf_f6i_alloc is the last caller of fib6_info_alloc besides
ip6_route_info_create. There really is no good reason for it do
its own fib6_info initialization, so convert it to call
ip6_route_info_create.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 10:16:54 -07:00
David Ahern
c7a1ce397a ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create
Change addrconf_f6i_alloc to generate a fib6_config and call
ip6_route_info_create. addrconf_f6i_alloc is the last caller to
fib6_info_alloc besides ip6_route_info_create, and there is no
reason for it to do its own initialization on a fib6_info.

Host routes need to be created even if the device is down, so add a
new flag, fc_ignore_dev_down, to fib6_config and update fib6_nh_init
to not error out if device is not up.

Notes on the conversion:
- ip_fib_metrics_init is the same as fib6_config has fc_mx set to NULL
  and fc_mx_len set to 0
- dst_nocount is handled by the RTF_ADDRCONF flag
- dst_host is handled by fc_dst_len = 128

nh_gw does not get set after the conversion to ip6_route_info_create
but it should not be set in addrconf_f6i_alloc since this is a host
route not a gateway route.

Everything else is a straight forward map between fib6_info and
fib6_config.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 10:16:54 -07:00
David Ahern
67f6951347 ipv6: Move setting default metric for routes
ip6_route_info_create is a low level function for ensuring fc_metric is
set. Move the check and default setting to the 2 locations that do not
already set fc_metric before calling ip6_route_info_create. This is
required for the next patch which moves addrconf allocations to
ip6_route_info_create and want the metric for host routes to be 0.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 10:16:54 -07:00
Vakul Garg
a88c26f671 net/tls: Replace kfree_skb() with consume_skb()
To free the skb in normal course of processing, consume_skb() should be
used. Only for failure paths, skb_free() is intended to be used.

https://www.kernel.org/doc/htmldocs/networking/API-consume-skb.html

Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 10:14:26 -07:00
Hoang Le
08e046c896 tipc: fix a null pointer deref
In commit c55c8edafa ("tipc: smooth change between replicast and
broadcast") we introduced new method to eliminate the risk of message
reordering that happen in between different nodes.
Unfortunately, we forgot checking at receiving side to ignore intra node.

We fix this by checking and returning if arrived message from intra node.

syzbot report:

==================================================================
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 7820 Comm: syz-executor418 Not tainted 5.0.0+ #61
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
RIP: 0010:tipc_mcast_filter_msg+0x21b/0x13d0 net/tipc/bcast.c:782
Code: 45 c0 0f 84 39 06 00 00 48 89 5d 98 e8 ce ab a5 fa 49 8d bc
 24 c8 00 00 00 48 b9 00 00 00 00 00 fc ff df 48 89 f8 48 c1 e8 03
 <80> 3c 08 00 0f 85 9a 0e 00 00 49 8b 9c 24 c8 00 00 00 48 be 00 00
RSP: 0018:ffff8880959defc8 EFLAGS: 00010202
RAX: 0000000000000019 RBX: ffff888081258a48 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffffffff86cab862 RDI: 00000000000000c8
RBP: ffff8880959df030 R08: ffff8880813d0200 R09: ffffed1015d05bc8
R10: ffffed1015d05bc7 R11: ffff8880ae82de3b R12: 0000000000000000
R13: 000000000000002c R14: 0000000000000000 R15: ffff888081258a48
FS:  000000000106a880(0000) GS:ffff8880ae800000(0000)
 knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020001cc0 CR3: 0000000094a20000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tipc_sk_filter_rcv+0x182d/0x34f0 net/tipc/socket.c:2168
 tipc_sk_enqueue net/tipc/socket.c:2254 [inline]
 tipc_sk_rcv+0xc45/0x25a0 net/tipc/socket.c:2305
 tipc_sk_mcast_rcv+0x724/0x1020 net/tipc/socket.c:1209
 tipc_mcast_xmit+0x7fe/0x1200 net/tipc/bcast.c:410
 tipc_sendmcast+0xb36/0xfc0 net/tipc/socket.c:820
 __tipc_sendmsg+0x10df/0x18d0 net/tipc/socket.c:1358
 tipc_sendmsg+0x53/0x80 net/tipc/socket.c:1291
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:661
 ___sys_sendmsg+0x806/0x930 net/socket.c:2260
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2298
 __do_sys_sendmsg net/socket.c:2307 [inline]
 __se_sys_sendmsg net/socket.c:2305 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2305
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4401c9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8
 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05
 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffd887fa9d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9
RDX: 0000000000000000 RSI: 0000000020002140 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a50
R13: 0000000000401ae0 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace ba79875754e1708f ]---

Reported-by: syzbot+be4bdf2cc3e85e952c50@syzkaller.appspotmail.com
Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 09:56:55 -07:00