Fix the following coccicheck warning:
arch/mips/kvm/tlb.c:472:2-3: Unneeded semicolon
arch/mips/kvm/tlb.c:489:2-3: Unneeded semicolon
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix the following coccicheck warning:
arch/mips/kvm/mips.c:82:1-28: WARNING: Assignment of 0/1 to bool
variable
arch/mips/kvm/mips.c:88:1-28: WARNING: Assignment of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This is an add-on patch to the main SoC Sparx5 series
(Message-ID: <20200513125532.24585-1-lars.povlsen@microchip.com>).
This changes the miim pinctrl function name from "miim1" to "miim" due
to refactoring in the driver, obsoleting the instance number.
The change in the driver was to better fit new platforms, as the
instance number is redundant information. Specifically, support for
the Microchip Sparx5 SoC is being submitted, where this change became
necessary.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 26bff9eb49 ("MIPS: Only include the platformfile needed")
moves platform-(CONFIG_XYZ) from arch/mips/xyz/Platform to arch/mips/
Kbuild.platforms. This change causes an error when "make clean":
./scripts/Makefile.clean:15: arch/mips/vr41xx/Makefile: No such file or directory
make[3]: *** No rule to make target `arch/mips/vr41xx/Makefile'. Stop.
make[2]: *** [arch/mips/vr41xx] Error 2
make[1]: *** [_clean_arch/mips] Error 2
make: *** [sub-make] Error 2
Clean-files are defined in arch/mips/Kbuild:
obj- := $(platform-)
Due to the movement of platform-(CONFIG_XYZ), "make clean" will enter
arch/mips/vr41xx/ whether CONFIG_MACH_VR41XX is defined or not. Because
there is no Makefile in arch/mips/vr41xx/, "make clean" fails. I don't
know what is the best way to fix it, but it seems like we can avoid this
error by changing the obj- definition:
obj- := $(platform-y)
Fixes: 26bff9eb49 ("MIPS: Only include the platformfile needed")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 26bff9eb49 ("MIPS: Only include the platform file needed")
misspelled "txx9" to "tx99", so fix it.
Fixes: 26bff9eb49 ("MIPS: Only include the platform file needed")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Instead of including all Platform files, we simply include the
needed one and avoid clashes with makefile variables.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently, when linking with ld.lld, this warning pops up:
arch/mips/vdso/Makefile:70: MIPS VDSO requires binutils >= 2.25
CONFIG_LD_VERSION is set with scripts/ld-version.sh, which is specific
to GNU ld. It returns 0 for ld.lld so CONFIG_MIPS_LD_CAN_LINK_VDSO does
not set.
ld.lld has a completely different versioning scheme (as it follows
LLVM's versioning) and it does not have the issue mentioned in the
comment block so it should be allowed to link the VDSO.
With this patch, the VDSO successfully links and shows P_MIPS_PC32 in
vgettimeofday.o.
$ llvm-objdump -Dr arch/mips/vdso/vgettimeofday.o | grep R_MIPS_PC32
00000024: R_MIPS_PC32 _start
000000b0: R_MIPS_PC32 _start
000002bc: R_MIPS_PC32 _start
0000036c: R_MIPS_PC32 _start
00000468: R_MIPS_PC32 _start
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/785
Link: e364e2e9ce
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently, the VDSO is being linked through $(CC). This does not match
how the rest of the kernel links objects, which is through the $(LD)
variable.
When clang is built in a default configuration, it first attempts to use
the target triple's default linker then the system's default linker,
unless told otherwise through -fuse-ld=... We do not use -fuse-ld=
because it can be brittle and we have support for invoking $(LD)
directly. See commit fe00e50b2d ("ARM: 8858/1: vdso: use $(LD)
instead of $(CC) to link VDSO") and commit 691efbedc6 ("arm64: vdso:
use $(LD) instead of $(CC) to link VDSO") for examples of doing this in
the VDSO.
Do the same thing here. Replace the custom linking logic with $(cmd_ld)
and ldflags-y so that $(LD) is respected. We need to explicitly add two
flags to the linker that were implicitly passed by the compiler:
-G 0 (which comes from ccflags-vdso) and --eh-frame-hdr.
Before this patch (generated by adding '-v' to VDSO_LDFLAGS):
<gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/collect2 \
-plugin <gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/liblto_plugin.so \
-plugin-opt=<gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/lto-wrapper \
-plugin-opt=-fresolution=/tmp/ccGEi5Ka.res \
--eh-frame-hdr \
-G 0 \
-EB \
-mips64r2 \
-shared \
-melf64btsmip \
-o arch/mips/vdso/vdso.so.dbg.raw \
-L<gcc_prefix>/lib/gcc/mips64-linux/9.3.0/64 \
-L<gcc_prefix>/lib/gcc/mips64-linux/9.3.0 \
-L<gcc_prefix>/lib/gcc/mips64-linux/9.3.0/../../../../mips64-linux/lib \
-Bsymbolic \
--no-undefined \
-soname=linux-vdso.so.1 \
-EB \
--hash-style=sysv \
--build-id \
-T arch/mips/vdso/vdso.lds \
arch/mips/vdso/elf.o \
arch/mips/vdso/vgettimeofday.o \
arch/mips/vdso/sigreturn.o
After this patch:
<gcc_prefix>/bin/mips64-linux-ld \
-m elf64btsmip \
-Bsymbolic \
--no-undefined \
-soname=linux-vdso.so.1 \
-EB \
-nostdlib \
-shared \
-G 0 \
--eh-frame-hdr \
--hash-style=sysv \
--build-id \
-T arch/mips/vdso/vdso.lds \
arch/mips/vdso/elf.o \
arch/mips/vdso/vgettimeofday.o
arch/mips/vdso/sigreturn.o \
-o arch/mips/vdso/vdso.so.dbg.raw
Note that we leave behind -mips64r2. Turns out that ld ignores it (see
get_emulation in ld/ldmain.c). This is true of current trunk and 2.23,
which is the minimum supported version for the kernel:
https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=ld/ldmain.c;hb=aa4209e7b679afd74a3860ce25659e71cc4847d5#l593https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=ld/ldmain.c;hb=a55e30b51bc6227d8d41f707654d0a5620978dcf#l641
Before this patch, LD=ld.lld did nothing:
$ llvm-readelf -p.comment arch/mips/vdso/vdso.so.dbg | sed 's/(.*//'
String dump of section '.comment':
[ 0] ClangBuiltLinux clang version 11.0.0
After this patch, it does:
$ llvm-readelf -p.comment arch/mips/vdso/vdso.so.dbg | sed 's/(.*//'
String dump of section '.comment':
[ 0] Linker: LLD 11.0.0
[ 62] ClangBuiltLinux clang version 11.0.0
Link: https://github.com/ClangBuiltLinux/linux/issues/785
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This was all done to work around a GCC bug that has been fixed after
4.2. The kernel requires GCC 4.6 or newer so remove all of these hacks
and just use the traditional flags.
$ mips64-linux-gcc --version | head -n1
mips64-linux-gcc (GCC) 4.6.3
$ mips64-linux-gcc -EB -dM -E -C -x c /dev/null | grep MIPSE
#define MIPSEB 1
#define __MIPSEB__ 1
#define _MIPSEB 1
#define __MIPSEB 1
$ mips64-linux-gcc -EL -dM -E -C -x c /dev/null | grep MIPSE
#define __MIPSEL__ 1
#define MIPSEL 1
#define _MIPSEL 1
#define __MIPSEL 1
This is necessary when converting the MIPS VDSO to use $(LD) instead of
$(CC) to link because the OUTPUT_FORMAT is defaulted to little endian
and only flips to big endian when '-EB' is set on the command line.
There is no issue currently because the compiler explicitly passes
'-EB' or '-EL' to the linker regardless of whether or not it was
provided by the user. Passing '-v' to VDSO_LDFLAGS shows:
<gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/collect2 ... -EB ...
even though '-EB' is nowhere to be found in KBUILD_CFLAGS. The VDSO
Makefile already supports getting '-EB' or '-EL' from KBUILD_CFLAGS
through a filter directive but '-EB' or '-EL' is not always present.
If we do not do this, we will see the following error when compiling
for big endian:
$ make -j$(nproc) ARCH=mips CROSS_COMPILE=mips64-linux- \
64r2el_defconfig arch/mips/vdso/
...
mips64-linux-ld: arch/mips/vdso/elf.o: compiled for a big endian system
and target is little endian
mips64-linux-ld: arch/mips/vdso/elf.o: endianness incompatible with that
of the selected emulation
mips64-linux-ld: failed to merge target specific data of file
arch/mips/vdso/elf.o
...
Remove this legacy hack and just use '-EB' and '-EL' unconditionally.
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 9553d16fa6 ("init/kconfig: Add LD_VERSION Kconfig"), we
have access to GNU ld's version at configuration time. As a result, we
can make it clearer under what configuration circumstances the MIPS VDSO
needs to be disabled.
This is a prerequisite for getting rid of the MIPS VDSO binutils
warning and linking the VDSO when LD is ld.lld. Wrapping the call to
ld-ifversion with CONFIG_LD_IS_LLD does not work because the config
values are wiped away during 'make clean'.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
__flush_icache_user_range is not used in modular code, so unexport it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In the current market, the most used bridge chip on the Loongson platform
are RS780E and LS7A, the RS780E bridge chip is already supported by the
mainline kernel.
If use the default implementation of __phys_to_dma() and __dma_to_phys()
in dma-direct.h when CONFIG_ARCH_HAS_PHYS_TO_DMA is not set, it works
well used with LS7A on the Loongson single-way and multi-way platform,
and also works well used with RS780E on the Loongson single-way platform,
but the DMA address will be wrong on the non-node0 used with RS780E on
the Loongson multi-way platform.
Just as the description in the code comment, the devices get node id from
40 bit of HyperTransport bus, so we extract 2 bit node id (bit 44~45) from
48 bit address space of Loongson CPU and embed it into HyperTransport bus
(bit 37-38), this operation can be done only at the software level used
with RS780E on the Loongson multi-way platform, because it has no hardware
function to translate address of node id, this is a hardware compatibility
problem.
Device
|
| DMA address
|
Host Bridge
|
| HT bus address (40 bit)
|
CPU
|
| physical address (48 bit)
|
RAM
The LS7A has dma_node_id_offset field in the DMA route config register,
the hardware can use the dma_node_id_offset to translate address of
node id automatically, so we can get correct address when just use the
dma_pfn_offset field in struct device.
For the above reasons, in order to maintain downward compatibility
to support the RS780E bridge chip, it is better to use the platform
dependent implementation of __phys_to_dma() and __dma_to_phys().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit d339cd02b8 ("MIPS: Move unaligned load/store helpers to
inst.h") causes a lot of build failures because macros in asm.h conflict
with various subsystems. Some of these conflictions has been fixed (such
as LONG, PANIC and PRINT) by adjusting asm.h, but some of them is nearly
impossible to fix (such as PTR and END). The only reason of including
asm.h in inst.h is that we need the PTR macro which is used by unaligned
load/store helpers. So in this patch we define a new PTR_STR macro and
use it to replace STR(PTR), then we can stop including asm.h to avoid
various build failures.
Fixes: d339cd02b8 ("MIPS: Move unaligned load/store helpers to inst.h")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use ASM_ prefix to rename some macros (PANIC and PRINT), in order to
avoid build errors (all users are updated as well):
1, PANIC conflicts with drivers/scsi/smartpqi/smartpqi_init.c
2, PRINT conflicts with net/netfilter/nf_conntrack_h323_asn1.c and net/
mac80211/debugfs_sta.c
Fixes: d339cd02b8 ("MIPS: Move unaligned load/store helpers to inst.h")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
According to the MIPS32 InterAptiv software manual error codes 24 - 26
of CM2 indicate L2 ECC/parity error with switching to a corresponding
errors info fields. This patch provides these errors parsing code,
which handles the read/write uncorrectable and correctable ECC/parity
errors, and prints instruction causing the fault, RAM array type, cache
way/dword and syndrome associated with the faulty data.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 3885c2b463 ("MIPS: CM: Add support for reporting CM cache
errors") adds cm2_causes[] array with map of error type ID and
pointers to the short description string. There is a mistake in
the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18}
correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table
claims they have {0x17,0x18} codes. This is obviously hex-dec
copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors.
Fixes: 3885c2b463 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The JZ4740 setup code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Fixes: f932449c11 ("MIPS: ingenic: Drop obsolete code, merge the rest in setup.c")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
LLD failed to link vmlinux with 64bit load address for 32bit ELF
while bfd will strip 64bit address into 32bit silently.
To fix LLD build, we should truncate load address provided by platform
into 32bit for 32bit kernel.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/786
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This code has been marked dead for more than 10 years. Seems no need to
keep it now.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This code has been marked dead since the beginning of the git history.
Seems no need to keep it now.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This code has been marked dead for more than 10 years. Seems no need to
keep it now.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Just move "returns" after "loongson3-llsc-check", no function changes.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The last branch of switch-case doesn't need a "fallthrough" pseudo
keyword, and it will cause errors when building a kernel with -Werror:
arch/mips/kernel/perf_event_mipsxx.c: In function 'reset_counters':
include/linux/compiler_attributes.h:200:41: error: attribute 'fallthrough' not preceding a case label or default label [-Werror]
200 | # define fallthrough __attribute__((__fallthrough__))
| ^~~~~~~~~~~~~
>> arch/mips/kernel/perf_event_mipsxx.c:932:3: note: in expansion of macro 'fallthrough'
932 | fallthrough;
| ^~~~~~~~~~~
arch/mips/kernel/perf_event_mipsxx.c: In function 'loongson3_reset_counters':
include/linux/compiler_attributes.h:200:41: error: attribute 'fallthrough' not preceding a case label or default label [-Werror]
200 | # define fallthrough __attribute__((__fallthrough__))
| ^~~~~~~~~~~~~
arch/mips/kernel/perf_event_mipsxx.c:903:3: note: in expansion of macro 'fallthrough'
903 | fallthrough;
| ^~~~~~~~~~~
cc1: all warnings being treated as errors
Fix it by removing unnecessary "fallthrough" pseudo keywords.
Fixes: e9dfbaaeef ("MIPS: perf: Add hardware perf events support for new Loongson-3")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Drop CONFIG_MTD_M25P80 that was removed in
commit b35b9a1036 ("mtd: spi-nor: Move m25p80 code in spi-nor.c")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Huacai just informed me that some early Loongson-3A2000 had wrong
TLB type in Config0 register. That means we have to correct it via
PRID.
It looks like I shoudn't drop MIPS_CPU_FTLB flag in PRID case for
Loongson-3 Classic.
Fixes: da1bd29742 ("MIPS: Loongson64: Probe CPU features via CPUCFG")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reported-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CPUCFG is a Loongson self-defined instruction used to mark CPU
features for Loongson processors started from Loongson-3A4000.
Slightly adjust cpu_probe_loongson function as well. Remove features
that already probed via decode_configs in processor's PRID case
and add a comment about TLBINV.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
New Loongson-3 means Loongson-3A R2 (Loongson-3A2000) and newer CPUs.
Loongson-3 processors have three types of PMU types (so there are three
event maps): Loongson-3A1000/Loonngson-3B1000/Loongson-3B1500 is Type-1,
Loongson-3A2000/Loongson-3A3000 is Type-2, Loongson-3A4000+ is Type-3.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It is better to show the result before loongson3-llsc-check exit,
otherwise we can see nothing if the return status is EXIT_SUCCESS,
it seems confusing.
E.g. without this patch:
[loongson@localhost tools]$ ./loongson3-llsc-check ../../../vmlinux
[loongson@localhost tools]$
With this patch:
[loongson@localhost tools]$ ./loongson3-llsc-check ../../../vmlinux
loongson3-llsc-check returns success
[loongson@localhost tools]$
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Drop a bootload of 10-years-old dirty code, that is not used anymore, as
it has been replaced with clean code over the ages.
Merge the very few bits left inside setup.c, so that everything is clean
and tidy now.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Enable support for the new hardware that was added in the devicetree.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The OST driver provides a clocksource and sched_clock that are much more
accurate than the default ones.
The PWM driver allows to use the PWM pins on the external header of the
board.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add support for the face buttons, the ACT8600 PMUC, the LCD panel
with backlight, the rumble, internal/external SD readers, and other
things.
Note that the otg-phy node was dropped in the process as it was neither
useful nor used, and was inside a non-compliant board "bus".
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add support for the RTC, AIC, CODEC, MMC 0/1/2, ADC, GPU, LCD,
USB OTG, USB PHY controllers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the TCU nodes to the JZ4780, JZ4770 and JZ4740 devicetree files.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If N fields of X cells should be provided, then that's what the
devicetree should represent, instead of having one single field of
(N*X) cells.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The driver requires two cells and not just one.
Since these nodes are both disabled as no hardware currently use them,
this fix does not really requires a Fixes: tag.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Sort the members of enum in alphabetical order is better to avoid
duplicate mistakes (because the list may be grow very large), so
fix it by exchanging the order.
Signed-off-by: Liangliang Huang <huangll@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Read the address of host bridge configuration space to get the vendor ID
and device ID of host bridge, and then we can distinguish various types
of host bridge such as LS7A or RS780E.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix the following coccicheck warning:
arch/mips/oprofile/common.c:113:2-3: Unneeded semicolon
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Loongson-2K (Loongson64 Reduced) is a family of SoC shipped with
gs264e core.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In order to use perf tool on the Loongson platform, we should enable kernel
support for various performance events provided by software and hardware,
so add CONFIG_PERF_EVENTS=y to loongson3_defconfig.
E.g. without this patch:
[loongson@localhost perf]$ ./perf list
List of pre-defined events (to be used in -e):
duration_time [Tool event]
rNNN [Raw hardware event descriptor]
cpu/t1=v1[,t2=v2,t3 ...]/modifier [Raw hardware event descriptor]
(see 'man perf-list' on how to encode it)
mem:<addr>[/len][:access] [Hardware breakpoint]
With this patch:
[loongson@localhost perf]$ ./perf list
List of pre-defined events (to be used in -e):
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
alignment-faults [Software event]
bpf-output [Software event]
context-switches OR cs [Software event]
cpu-clock [Software event]
cpu-migrations OR migrations [Software event]
dummy [Software event]
emulation-faults [Software event]
major-faults [Software event]
minor-faults [Software event]
page-faults OR faults [Software event]
task-clock [Software event]
duration_time [Tool event]
L1-dcache-load-misses [Hardware cache event]
L1-dcache-store-misses [Hardware cache event]
L1-icache-load-misses [Hardware cache event]
branch-load-misses [Hardware cache event]
branch-loads [Hardware cache event]
dTLB-load-misses [Hardware cache event]
dTLB-store-misses [Hardware cache event]
iTLB-load-misses [Hardware cache event]
rNNN [Raw hardware event descriptor]
cpu/t1=v1[,t2=v2,t3 ...]/modifier [Raw hardware event descriptor]
(see 'man perf-list' on how to encode it)
mem:<addr>[/len][:access] [Hardware breakpoint]
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS define a "Fill" macro as a cache operation in cacheops.h, this
will cause build failure under some special configurations because in
seq_file.c there is a "Fill" label. To avoid this failure we rename the
"Fill" macro to "Fill_I" which has the same coding style as other cache
operations in cacheops.h (we think renaming the "Fill" macro is more
reasonable than renaming the "Fill" label).
Callers of "Fill" macro is also updated.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
XContext might be dirty at boot time. We need to clear it
to ensure early stackframe is safe.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
