AM65x PG1 has a HW issue with YUV pixel formats, resulting in wrong
colors on the screen. This issue is fixed in PG2 hardware.
The driver currently has code to hide YUV pixel formats from the
userspace. To support PG2, we would need to add code to detect the SoC
version and hide the YUV formats based on that.
However, as PG1 will be phased out and PG2 will be the main platform, a
much simpler solution is just to drop the code in question. The downside
is that the users will be able to use YUV formats on PG1, getting wrong
colors on the screen. On the other hand, that may also be a plus, as the
same applications will now work on PG1 and PG2, even if the colors are
wrong on PG1.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429121022.3871-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Not used anymore since the switch to suspend/resume helpers.
Tested-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-26-daniel.vetter@ffwll.ch
Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.
Tested-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-25-daniel.vetter@ffwll.ch
Already using devm_drm_dev_init, so very simple replacment.
Tested-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-24-daniel.vetter@ffwll.ch
tidss uses devm_kzalloc to allocate DRM plane, encoder and crtc objects.
This is not correct as the lifetime of those objects should be longer
than the underlying device's.
When unloading tidss module, the devm_kzalloc'ed objects have already
been freed when tidss_release() is called, and the driver will accesses
freed memory possibly causing a crash, a kernel WARN, or other undefined
behavior, and also KASAN will give a bug.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415092006.26675-1-tomi.valkeinen@ti.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The tidss driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-17-tzimmermann@suse.de
It's right above the drm_dev_put().
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
Aside: Another driver with a bit much devm_kzalloc, which should
probably use drmm_kzalloc instead ...
I'm pretty sure this one blows up already under KASAN because it's
using devm_drm_dev_init, and later on devm_kzalloc. Hence the memory
will get freed before the final drm_dev_put (all from the devres
code), but the cleanup in that final drm_dev_put will access the just
freed memory.
Unfortunately fixing this properly needs slightly more work, namely
drmm_ versions for all the drm objects (planes, crtc, ...), so that
the cleanup actually happens before even drmm_kzalloc would release
the underlying memory. Not quite there yet.
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-42-daniel.vetter@ffwll.ch
There is no need to have the 'const struct dispc_csc_coef *coef'
variable static since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227065057.92766-1-yuehaibing@huawei.com
Replace the manual encoder->bridge_chain walk with the
drm_for_each_bridge_in_chain() macro. Drivers should not touch the
bridge_chain field directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200222110718.26272-1-laurent.pinchart@ideasonboard.com
The old implementation of placing planes on the CRTC while configuring
the planes was naive and relied on the order in which the planes were
configured, enabled, and disabled. The situation where a plane's zpos
was changed on the fly was completely broken. The usual symptoms of
this problem was scrambled display and a flood of sync lost errors,
when a plane was active in two layers at the same time, or a missing
plane, in case when a layer was accidentally disabled.
The rewrite takes a more straight forward approach when HW is
concerned. The plane positioning registers are in the CRTC (or
actually OVR) register space and it is more natural to configure them
in a one go when configuring the CRTC. To do this we need make sure we
have all the planes on the updated CRTCs in the new atomic state. The
untouched planes on CRTCs that need plane position update are added to
the atomic state in tidss_atomic_check().
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227120052.23168-1-jsarha@ti.com
Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:
- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.
- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.
- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).
In order to solve these issues, ownership of the connector should be
moved to the display controller driver (where it can be implemented
using helpers provided by the core).
Extend the bridge API to allow disabling connector creation in bridge
drivers as a first step towards the new model. The new flags argument to
the bridge .attach() operation allows instructing the bridge driver to
skip creating a connector. Unconditionally set the new flags argument to
0 for now to keep the existing behaviour, and modify all existing bridge
drivers to return an error when connector creation is not requested as
they don't support this feature yet.
The change is based on the following semantic patch, with manual review
and edits.
@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.attach = fn
};
@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
statement S, S1;
@@
int fn(
struct drm_bridge *bridge
+ , enum drm_bridge_attach_flags flags
)
{
... when != S
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+ DRM_ERROR("Fix bridge driver to make connector optional!");
+ return -EINVAL;
+ }
+
S1
...
}
@ depends on rule1 @
identifier rule1.fn;
identifier bridge, flags;
expression E1, E2, E3;
@@
int fn(
struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags
) {
<...
drm_bridge_attach(E1, E2, E3
+ , flags
)
...>
}
@@
expression E1, E2, E3;
@@
drm_bridge_attach(E1, E2, E3
+ , 0
)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
This patch adds a new DRM driver for Texas Instruments DSS IPs used on
Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is
a major change to the older DSS IP versions, which are supported by
the omapdrm driver. While on higher level the Keystone DSS resembles
the older DSS versions, the registers are completely different and the
internal pipelines differ a lot.
DSS IP found on K2G is an "ultra-light" version, and has only a single
plane and a single output. The K3 DSS IPs are found on AM65x and J721E
SoCs. AM65x DSS has two video ports, one full video plane, and another
"lite" plane without scaling support. J721E has 4 video ports, 2 video
planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS)
output.
Version history:
v2: - rebased on top of drm-next-2019-11-27
- sort all include lines in all files
- remove all include <drm/drmP.h>
- remove select "select VIDEOMODE_HELPERS"
- call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no
to call it in new modeset case as it is also called in vp_enable())
- change probe sequence and drm_device allocation (follow example in
drm_drv.c)
- use __maybe_unused instead of #ifdef for pm functions
- remove "struct drm_fbdev_cma *fbdev;" from driver data
- check panel connector type before connecting it
v3: no change
v4: no change
v5: - remove fifo underflow irq handling, it is not an error and
it should be used for debug purposes only
- memory tuning, prefetch plane fifo up to high-threshold value to
minimize possibility of underflows.
v6: - Check CTM and gamma support from dispc_features when creating crtc
- Implement CTM support for k2g and fix k3 CTM implementation
- Remove gamma property persistence and always write color properties
in a new modeset
v7: - Fix checkpatch.pl --strict issues
- Rebase on top of drm-misc-next-2020-01-10
v8: - Remove idle debug prints from dispc_init()
- Add Reviewed-by: Benoit Parrot <bparrot@ti.com>
v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid
conflict exported omapfb function with same name
- Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com
