HDMI Mode selection on CNL is on CFGCR0 for that PLL, not
on in a global CTRL1 as it was on SKL.
The original patch addressed this difference, but leaving behind
this single entry here. So we were checking the wrong bits during
the PLL initialization and consequently avoiding the CFGCR1 setup
during HDMI initialization. Luckly when only HDMI was in use BIOS
had already setup this for us. But the dual display with hot plug
were messed up.
Fixes: a927c927de ("drm/i915/cnl: Initialize PLLs")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Kahola, Mika <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-3-rodrigo.vivi@intel.com
(cherry picked from commit 614ee07acf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On PLL Enable sequence we need to "Configure DPCLKA_CFGCR0 to turn on
the clock for the DDI and map the DPLL to the DDI"
So we first do the map and then we unset DDI_CLK_OFF to turn the clock
on. We do this in 2 separated steps.
However, on this second step where we should only unset the off bit we are
also unmapping the ddi from the pll. So we end up using the pll 0
for almost everything. Consequently breaking cases with more than one
display.
Fixes: 555e38d273 ("drm/i915/cnl: DDI - PLL mapping")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Kahola, Mika <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-2-rodrigo.vivi@intel.com
(cherry picked from commit 87145d95c3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The compiler warns:
drivers/gpu/drm/i915/intel_ddi.c:118:35: warning: ‘bdw_ddi_translations_fdi’ defined but not used
Lo and behold, if we look at intel_ddi_get_buf_trans_fdi(), it uses
hsw_ddi_translations_fdi[] for both Haswell and *Broadwell*
Fixes: 7d1c42e679 ("drm/i915: Refactor code to select the DDI buf translation table")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20171013154735.27163-1-chris@chris-wilson.co.uk
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 1210d38890)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In the full-ppgtt world, we can fill the GGTT full of context objects.
These context objects are currently implicitly tracked by the requests
that pin them i.e. they are only unpinned when the request is completed
and retired, but we do not have the link from the vma to the request
(anymore). In order to unpin those contexts, we have to issue another
request and wait upon the switch to the kernel context.
The bug during eviction was that we assumed that a full GGTT meant we
would have requests on the GGTT timeline, and so we missed situations
where those requests where merely in flight (and when even they have not
yet been submitted to hw yet). The fix employed here is to change the
already-is-idle test to no look at the execution timeline, but count the
outstanding requests and then check that we have switched to the kernel
context. Erring on the side of overkill here just means that we stall a
little longer than may be strictly required, but we only expect to hit
this path in extreme corner cases where returning an erroneous error is
worse than the delay.
v2: Logical inversion when swapping over branches.
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-1-chris@chris-wilson.co.uk
(cherry picked from commit 55b4f1ce2f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----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=Iwyf
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a single fix, for a WoWLAN-related part of CVE-2017-13080.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When changing dev tx_queue_len via netlink or net-sysfs,
a NETDEV_CHANGE_TX_QUEUE_LEN event notification will be
called.
But dev_ioctl missed this event notification, which could
cause no userspace notification would be sent.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 7091d8c '(net/sched: cls_flower: Add offload support using egress
Hardware device') made sure (when fl_hw_replace_filter is called) to put
the egress_dev mark on persisent structure instance. Hence, following calls
into the HW driver for stats and deletion will note it and act accordingly.
With commit de4784ca03 this property is lost and hence when called,
the HW driver failes to operate (stats, delete) on the offloaded flow.
Fix it by setting the egress_dev flag whenever the ingress device is
different from the hw device since this is exactly the condition under
which we're calling into the HW driver through the egress port net-device.
Fixes: de4784ca03 ('net: sched: get rid of struct tc_to_netdev')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
register_netdevice() could fail early when we have an invalid
dev name, in which case ->ndo_uninit() is not called. For tun
device, this is a problem because a timer etc. are already
initialized and it expects ->ndo_uninit() to clean them up.
We could move these initializations into a ->ndo_init() so
that register_netdevice() knows better, however this is still
complicated due to the logic in tun_detach().
Therefore, I choose to just call dev_get_valid_name() before
register_netdevice(), which is quicker and much easier to audit.
And for this specific case, it is already enough.
Fixes: 96442e4242 ("tuntap: choose the txq based on rxq")
Reported-by: Dmitry Alexeev <avekceeb@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC791 specifies the minimum MTU to be 68, while xen-net{front|back}
drivers use a minimum value of 0.
When set MTU to 0~67 with xen_net{front|back} driver, the network
will become unreachable immediately, the guest can no longer be pinged.
xen_net{front|back} should not allow the user to set this value which causes
network problems.
Reported-by: Chen Shi <cheshi@redhat.com>
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
IFLA_IFALIAS is defined as NLA_STRING. It means that the minimal length of
the attribute is 1 ("\0"). However, to remove an alias, the attribute
length must be 0 (see dev_set_alias()).
Let's define the type to NLA_BINARY to allow 0-length string, so that the
alias can be removed.
Example:
$ ip l s dummy0 alias foo
$ ip l l dev dummy0
5: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:20:30:4f:a7:f3 brd ff:ff:ff:ff:ff:ff
alias foo
Before the patch:
$ ip l s dummy0 alias ""
RTNETLINK answers: Numerical result out of range
After the patch:
$ ip l s dummy0 alias ""
$ ip l l dev dummy0
5: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:20:30:4f:a7:f3 brd ff:ff:ff:ff:ff:ff
CC: Oliver Hartkopp <oliver@hartkopp.net>
CC: Stephen Hemminger <stephen@networkplumber.org>
Fixes: 96ca4a2cc1 ("net: remove ifalias on empty given alias")
Reported-by: Julien FLoret <julien.floret@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
rtnetlink: a bunch of fixes for userspace notifications in changing dev properties
Whenever any property of a link, address, route, etc. changes by whatever way,
kernel should notify the programs that listen for such events in userspace.
The patchet "rtnetlink: Cleanup user notifications for netdev events" tried to
fix a redundant notifications issue, but it also introduced a side effect.
After that, user notifications could only be sent when changing dev properties
via netlink api. As it removed some events process in rtnetlink_event where
the notifications was sent to users.
It resulted in no notification generated when dev properties are changed via
other ways, like ioctl, sysfs, etc. It may cause some user programs doesn't
work as expected because of the missing notifications.
This patchset will fix it by bringing some of these netdev events back and
also fix the old redundant notifications issue with a proper way.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
NETDEV_CHANGE_TX_QUEUE_LEN event process in rtnetlink_event would
send a notification for userspace and tx_queue_len's setting in
do_setlink would trigger NETDEV_CHANGE_TX_QUEUE_LEN.
So it shouldn't set DO_SETLINK_NOTIFY status for this change to
send a notification any more.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The check 'status & DO_SETLINK_NOTIFY' in do_setlink doesn't really
work after status & DO_SETLINK_MODIFIED, as:
DO_SETLINK_MODIFIED 0x1
DO_SETLINK_NOTIFY 0x3
Considering that notifications are suppposed to be sent only when
status have the flag DO_SETLINK_NOTIFY, the right check would be:
(status & DO_SETLINK_NOTIFY) == DO_SETLINK_NOTIFY
This would avoid lots of duplicated notifications when setting some
properties of a link.
Fixes: ba9989069f ("rtnl/do_setlink(): notify when a netdev is modified")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
libteam needs this event notification in userspace when dev's master
dev has been changed. After this, the redundant notifications issue
would be fixed in the later patch 'rtnetlink: check DO_SETLINK_NOTIFY
correctly in do_setlink'.
Fixes: b6b36eb23a ("rtnetlink: Do not generate notifications for NETDEV_CHANGEUPPER event")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As I said in patch 'rtnetlink: bring NETDEV_CHANGEMTU event process back
in rtnetlink_event', removing NETDEV_POST_TYPE_CHANGE event was not the
right fix for the redundant notifications issue.
So bring this event process back to rtnetlink_event and the old redundant
notifications issue would be fixed in the later patch 'rtnetlink: check
DO_SETLINK_NOTIFY correctly in do_setlink'.
Fixes: aef091ae58 ("rtnetlink: Do not generate notifications for POST_TYPE_CHANGE event")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The same fix for changing mtu in the patch 'rtnetlink: bring
NETDEV_CHANGEMTU event process back in rtnetlink_event' is
needed for changing tx_queue_len.
Note that the redundant notifications issue for tx_queue_len
will be fixed in the later patch 'rtnetlink: do not send
notification for tx_queue_len in do_setlink'.
Fixes: 27b3b551d8 ("rtnetlink: Do not generate notifications for NETDEV_CHANGE_TX_QUEUE_LEN event")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 085e1a65f0 ("rtnetlink: Do not generate notifications for MTU
events") tried to fix the redundant notifications issue when ip link
set mtu by removing NETDEV_CHANGEMTU event process in rtnetlink_event.
But it also resulted in no notification generated when dev's mtu is
changed via other methods, like:
'ifconfig eth1 mtu 1400' or 'echo 1400 > /sys/class/net/eth1/mtu'
It would cause users not to be notified by this change.
This patch is to fix it by bringing NETDEV_CHANGEMTU event back into
rtnetlink_event, and the redundant notifications issue will be fixed
in the later patch 'rtnetlink: check DO_SETLINK_NOTIFY correctly in
do_setlink'.
Fixes: 085e1a65f0 ("rtnetlink: Do not generate notifications for MTU events")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last cleanup introduced two harmless warnings:
fs/xfs/xfs_fsmap.c:480:1: warning: '__xfs_getfsmap_rtdev' defined but not used
fs/xfs/xfs_fsmap.c:372:1: warning: 'xfs_getfsmap_rtdev_rtbitmap_helper' defined but not used
This moves those two functions as well.
Fixes: bb9c2e5433 ("xfs: move more RT specific code under CONFIG_XFS_RT")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The writeback rework in commit fbcc025613 ("xfs: Introduce
writeback context for writepages") introduced a subtle change in
behavior with regard to the block mapping used across the
->writepages() sequence. The previous xfs_cluster_write() code would
only flush pages up to EOF at the time of the writepage, thus
ensuring that any pages due to file-extending writes would be
handled on a separate cycle and with a new, updated block mapping.
The updated code establishes a block mapping in xfs_writepage_map()
that could extend beyond EOF if the file has post-eof preallocation.
Because we now use the generic writeback infrastructure and pass the
cached mapping to each writepage call, there is no implicit EOF
limit in place. If eofblocks trimming occurs during ->writepages(),
any post-eof portion of the cached mapping becomes invalid. The
eofblocks code has no means to serialize against writeback because
there are no pages associated with post-eof blocks. Therefore if an
eofblocks trim occurs and is followed by a file-extending buffered
write, not only has the mapping become invalid, but we could end up
writing a page to disk based on the invalid mapping.
Consider the following sequence of events:
- A buffered write creates a delalloc extent and post-eof
speculative preallocation.
- Writeback starts and on the first writepage cycle, the delalloc
extent is converted to real blocks (including the post-eof blocks)
and the mapping is cached.
- The file is closed and xfs_release() trims post-eof blocks. The
cached writeback mapping is now invalid.
- Another buffered write appends the file with a delalloc extent.
- The concurrent writeback cycle picks up the just written page
because the writeback range end is LLONG_MAX. xfs_writepage_map()
attributes it to the (now invalid) cached mapping and writes the
data to an incorrect location on disk (and where the file offset is
still backed by a delalloc extent).
This problem is reproduced by xfstests test generic/464, which
triggers racing writes, appends, open/closes and writeback requests.
To address this problem, trim the mapping used during writeback to
within EOF when the mapping is validated. This ensures the mapping
is revalidated for any pages encountered beyond EOF as of the time
the current mapping was cached or last validated.
Reported-by: Eryu Guan <eguan@redhat.com>
Diagnosed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Commit 332391a993 ("fs: Fix page cache inconsistency when mixing
buffered and AIO DIO") moved page cache invalidation from
iomap_dio_rw() to iomap_dio_complete() for iomap based direct write
path, but before the dio->end_io() call, and it re-introdued the bug
fixed by commit c771c14baa ("iomap: invalidate page caches should
be after iomap_dio_complete() in direct write").
I found this because fstests generic/418 started failing on XFS with
v4.14-rc3 kernel, which is the regression test for this specific
bug.
So similarly, fix it by moving dio->end_io() (which does the
unwritten extent conversion) before page cache invalidation, to make
sure next buffer read reads the final real allocations not unwritten
extents. I also add some comments about why should end_io() go first
in case we get it wrong again in the future.
Note that, there's no such problem in the non-iomap based direct
write path, because we didn't remove the page cache invalidation
after the ->direct_IO() in generic_file_direct_write() call, but I
decided to fix dio_complete() too so we don't leave a landmine
there, also be consistent with iomap_dio_complete().
Fixes: 332391a993 ("fs: Fix page cache inconsistency when mixing buffered and AIO DIO")
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Recently we've had warnings arise from the vm handing us pages
without bufferheads attached to them. This should not ever occur
in XFS, but we don't defend against it properly if it does. The only
place where we remove bufferheads from a page is in
xfs_vm_releasepage(), but we can't tell the difference here between
"page is dirty so don't release" and "page is dirty but is being
invalidated so release it".
In some places that are invalidating pages ask for pages to be
released and follow up afterward calling ->releasepage by checking
whether the page was dirty and then aborting the invalidation. This
is a possible vector for releasing buffers from a page but then
leaving it in the mapping, so we really do need to avoid dirty pages
in xfs_vm_releasepage().
To differentiate between invalidated pages and normal pages, we need
to clear the page dirty flag when invalidating the pages. This can
be done through xfs_vm_invalidatepage(), and will result
xfs_vm_releasepage() seeing the page as clean which matches the
bufferhead state on the page after calling block_invalidatepage().
Hence we can re-add the page dirty check in xfs_vm_releasepage to
catch the case where we might be releasing a page that is actually
dirty and so should not have the bufferheads on it removed. This
will remove one possible vector of "dirty page with no bufferheads"
and so help narrow down the search for the root cause of that
problem.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have implemented delayed ring mmio switch mechanism to reduce
unnecessary mmio switch. While the vGPU is being destroyed or
detached from VM, we need to force the ring switch to host context.
The later deadline is missed. Then it got a chance that word load
from VM2 might execute under the ring context of VM1 which was
attached to a same vGPU instance. Finally, the GPU is hang.
This patch guarantee the two deadline are performed.
v2: Remove unused variable 'scheduler'
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add native DSD support quirk for Pro-Ject Pre Box S2 Digital USB id
2772:0230.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a key is reinstalled we can reset the replay counters
etc. which can lead to nonce reuse and/or replay detection
being impossible, breaking security properties, as described
in the "KRACK attacks".
In particular, CVE-2017-13080 applies to GTK rekeying that
happened in firmware while the host is in D3, with the second
part of the attack being done after the host wakes up. In
this case, the wpa_supplicant mitigation isn't sufficient
since wpa_supplicant doesn't know the GTK material.
In case this happens, simply silently accept the new key
coming from userspace but don't take any action on it since
it's the same key; this keeps the PN replay counters intact.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
zipl from s390-tools generates root=/dev/ram0 kernel cmdline for
zfcpdump, thus BLK_DEV_RAM is required.
zfcpdump initrd mounts DEBUG_FS, thus is also required.
Bug-Ubuntu: https://launchpad.net/bugs/1722735
Bug-Ubuntu: https://launchpad.net/bugs/1719290
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When components are unbound, DRM driver is unregistered and freed,
so clear drvdata to avoid potential use-after-free issue in
suspend/resume paths.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch 6e8edf8a7d: "drm/exynos: Fix suspend/resume support" introduced
a new code in suspend/resume paths. However it unconditionally dereference
drm_dev pointer, which might be NULL if suspend/resume happens before
Exynos DRM driver components bind. This patch fixes this issue.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6e8edf8a7d "drm/exynos: Fix suspend/resume support"
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Here are 4 patches to resolve some char/misc driver issues found these
past weeks.
One of them is a mei bugfix and another is a new mei device id. There
is also a hyper-v fix for a reported issue, and a binder issue fix for a
problem reported by a few people.
All of these have been in my tree for a while, I don't know if
linux-next is really testing much this month. But 0-day is happy with
them :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWeNCTw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNOQCgzskhoji+7Fsl+xc3SX/3ntJwoecAnAz5xQIA
grpH4IOHq/0aPbQj8g3Y
=F3xc
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are 4 patches to resolve some char/misc driver issues found these
past weeks.
One of them is a mei bugfix and another is a new mei device id. There
is also a hyper-v fix for a reported issue, and a binder issue fix for
a problem reported by a few people.
All of these have been in my tree for a while, I don't know if
linux-next is really testing much this month. But 0-day is happy with
them :)"
* tag 'char-misc-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix use-after-free in binder_transaction()
Drivers: hv: vmbus: Fix bugs in rescind handling
mei: me: add gemini lake devices id
mei: always use domain runtime pm callbacks.
Here are a handful of USB driver fixes for 4.14-rc5.
There is the "usual" usb-serial fixes and device ids, USB gadget fixes,
and some more fixes found by the fuzz testing that is happening on the
USB layer right now.
All of these have been in my tree this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWeNDHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngbQCbBhbyMDZskwrjemqopL4ML1pGrAkAoKwcX2VK
lq1pOJB2GCMeWuUrFLzr
=MIeM
-----END PGP SIGNATURE-----
Merge tag 'usb-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a handful of USB driver fixes for 4.14-rc5.
There is the "usual" usb-serial fixes and device ids, USB gadget
fixes, and some more fixes found by the fuzz testing that is happening
on the USB layer right now.
All of these have been in my tree this week with no reported issues"
* tag 'usb-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: usbtest: fix NULL pointer dereference
usb: gadget: configfs: Fix memory leak of interface directory data
usb: gadget: composite: Fix use-after-free in usb_composite_overwrite_options
usb: misc: usbtest: Fix overflow in usbtest_do_ioctl()
usb: renesas_usbhs: Fix DMAC sequence for receiving zero-length packet
USB: dummy-hcd: Fix deadlock caused by disconnect detection
usb: phy: tegra: Fix phy suspend for UDC
USB: serial: console: fix use-after-free after failed setup
USB: serial: console: fix use-after-free on disconnect
USB: serial: qcserial: add Dell DW5818, DW5819
USB: serial: cp210x: add support for ELV TFD500
USB: serial: cp210x: fix partnum regression
USB: serial: option: add support for TP-Link LTE module
USB: serial: ftdi_sio: add id for Cypress WICED dev board
Michael Chan says:
====================
bnxt_en: bug fixes.
Various bug fixes for the VF/PF link change logic, VF resource checking,
potential firmware response corruption on NVRAM and DCB parameters,
and reading the wrong register for PCIe link speed on the VF.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
hwrm_send_message() is replaced with _hwrm_send_message(), and
hwrm_cmd_lock mutex lock is grabbed for the whole period of
firmware call until the firmware DCB parameters have been copied.
This will prevent possible corruption of the firmware data.
Fixes: 7df4ae9fe8 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Signed-off-by: Sankar Patchineelam <sankar.patchineelam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In bnxt_find_nvram_item(), it is copying firmware response data after
releasing the mutex. This can cause the firmware response data
to be corrupted if the next firmware response overwrites the response
buffer. The rare problem shows up when running ethtool -i repeatedly.
Fix it by calling the new variant _hwrm_send_message_silent() that requires
the caller to take the mutex and to release it after the response data has
been copied.
Fixes: 3ebf6f0a09 ("bnxt_en: Add installed-package version reporting via Ethtool GDRVINFO")
Reported-by: Sarveswara Rao Mygapula <sarveswararao.mygapula@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In bnxt_sriov_enable(), we calculate to see if we have enough hardware
resources to enable the requested number of VFs. The logic to check
for minimum completion rings and statistics contexts is missing. Add
the required checks so that VF configuration won't fail.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PCIE PCIE_EP_REG_LINK_STATUS_CONTROL register is only defined in PF
config space, so we must read it from the PF.
Fixes: 90c4f788f6 ("bnxt_en: Report PCIe link speed and width during driver load")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a further improvement to the PF/VF link change logic, use a private
mutex instead of the rtnl lock to protect link change logic. With the
new mutex, we don't have to take the rtnl lock in the workqueue when
we have to handle link related functions. If the VF and PF drivers
are running on the same host and both take the rtnl lock and one is
waiting for the other, it will cause timeout. This patch fixes these
timeouts.
Fixes: 90c694bb71 ("bnxt_en: Fix RTNL lock usage on bnxt_update_link().")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Link status query firmware messages originating from the VFs are forwarded
to the PF. The driver handles these interactions in a workqueue for the
VF and PF. The VF driver waits for the response from the PF in the
workqueue. If the PF and VF driver are running on the same host and the
work for both PF and VF are queued on the same workqueue, the VF driver
may not get the response if the PF work item is queued behind it on the
same workqueue. This will lead to the VF link query message timing out.
To prevent this, we create a private workqueue for PFs instead of using
the common workqueue. The VF query and PF response will never be on
the same workqueue.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 88E6060 Ethernet switch always transmits the multicast bit of the
switch MAC address as a zero. It re-uses the corresponding bit 8 of the
register "Switch MAC Address Register Bytes 0 & 1" for "DiffAddr".
If the "DiffAddr" bit is 0, then all ports transmit the same source
address. If it is set to 1, then bit 2:0 are used for the port number.
The mv88e6060 driver is currently wrongly shifting the MAC address byte
0 by 9. To fix this, shift it by 8 as usual and clear its bit 0.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When pppol2tp_session_ioctl() is called by pppol2tp_tunnel_ioctl(),
the session may be unconnected. That is, it was created by
pppol2tp_session_create() and hasn't been connected with
pppol2tp_connect(). In this case, ps->sock is NULL, so we need to check
for this case in order to avoid dereferencing a NULL pointer.
Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 fixes from Ingo Molnar:
"A landry list of fixes:
- fix reboot breakage on some PCID-enabled system
- fix crashes/hangs on some PCID-enabled systems
- fix microcode loading on certain older CPUs
- various unwinder fixes
- extend an APIC quirk to more hardware systems and disable APIC
related warning on virtualized systems
- various Hyper-V fixes
- a macro definition robustness fix
- remove jprobes IRQ disabling
- various mem-encryption fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Do the family check first
x86/mm: Flush more aggressively in lazy TLB mode
x86/apic: Update TSC_DEADLINE quirk with additional SKX stepping
x86/apic: Silence "FW_BUG TSC_DEADLINE disabled due to Errata" on hypervisors
x86/mm: Disable various instrumentations of mm/mem_encrypt.c and mm/tlb.c
x86/hyperv: Fix hypercalls with extended CPU ranges for TLB flushing
x86/hyperv: Don't use percpu areas for pcpu_flush/pcpu_flush_ex structures
x86/hyperv: Clear vCPU banks between calls to avoid flushing unneeded vCPUs
x86/unwind: Disable unwinder warnings on 32-bit
x86/unwind: Align stack pointer in unwinder dump
x86/unwind: Use MSB for frame pointer encoding on 32-bit
x86/unwind: Fix dereference of untrusted pointer
x86/alternatives: Fix alt_max_short macro to really be a max()
x86/mm/64: Fix reboot interaction with CR4.PCIDE
kprobes/x86: Remove IRQ disabling from jprobe handlers
kprobes/x86: Set up frame pointer in kprobe trampoline
Pull RAS fixes from Ingo Molnar:
"A boot parameter fix, plus a header export fix"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Hide mca_cfg
RAS/CEC: Use the right length for "cec_disable"
Pull perf fixes from Ingo Molnar:
"Some tooling fixes plus three kernel fixes: a memory leak fix, a
statistics fix and a crash fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix memory leaks on allocation failures
perf/core: Fix cgroup time when scheduling descendants
perf/core: Avoid freeing static PMU contexts when PMU is unregistered
tools include uapi bpf.h: Sync kernel ABI header with tooling header
perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU
perf script: Add missing separator for "-F ip,brstack" (and brstackoff)
perf callchain: Compare dsos (as well) for CCKEY_FUNCTION
Pull locking fixes from Ingo Molnar:
"Two lockdep fixes for bugs introduced by the cross-release dependency
tracking feature - plus a commit that disables it because performance
regressed in an absymal fashion on some systems"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Disable cross-release features for now
locking/selftest: Avoid false BUG report
locking/lockdep: Fix stacktrace mess
Pull irq fixes from Ingo Molnar:
"A CPU hotplug related fix, plus two related sanity checks"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/cpuhotplug: Enforce affinity setting on startup of managed irqs
genirq/cpuhotplug: Add sanity check for effective affinity mask
genirq: Warn when effective affinity is not updated
