Don't bail out before cleaning up a new allocation if the wait for
searching for a matching nfs client is interrupted. Memory leaks.
Reported-by: syzbot+7fe11b49c1cc30e3fce2@syzkaller.appspotmail.com
Fixes: 950a578c61 ("NFS: make nfs_match_client killable")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The NFS protocol doesn't support deduplication, so turn it off again.
Fixes: ce96e888fe ("Fix nfs4.2 return -EINVAL when do dedupe operation")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
On the NFS client there is no low-impact way to determine the nfs4
lease time or whether the lease is expired, so add these to mountstats
with times displayed in seconds.
If the lease is not expired, display lease_expired=0. Otherwise,
display lease_expired=seconds_since_expired, similar to 'age:' line
in mountstats.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Now that the VM promises never to recurse back into the filesystem
layer on writeback, remove all the GFP_NOFS references etc from
the generic writeback code.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
With NFSv4.1, different network connections need to be explicitly
bound to a session. During session startup, this is not possible
so only a single connection must be used for session startup.
So add a task flag to disable the default round-robin choice of
connections (when nconnect > 1) and force the use of a single
connection.
Then use that flag on all requests for session management - for
consistence, include NFSv4.0 management (SETCLIENTID) and session
destruction
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the user specifies -onconnect=<number> mount option, and the transport
protocol is TCP, then set up <number> connections to the pNFS data server
as well. The connections will all go to the same IP address.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the user specifies the -onconn=<number> mount option, and the transport
protocol is TCP, then set up <number> connections to the server. The
connections will all go to the same IP address.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Allow the user to specify that the client should use multiple connections
to the server. For the moment, this functionality will be limited to
TCP and to NFSv4.x (x>0).
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In order to identify containers to the NFS client, we add a per-net
sysfs attribute that udev can fill with the appropriate identifier.
The identifier could be a unique hostname, but in most cases it
will probably be a persisted uuid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the client detects that close-to-open cache consistency has been
violated, and that the file or directory has been changed on the
server, then do a cache invalidation when we're done working with
the file.
The reason we don't do an immediate cache invalidation is that we
want to avoid performance problems due to false positives. Also,
note that we cannot guarantee cache consistency in this situation
even if we do invalidate the cache.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
According to the open() manpage, Linux reserves the access mode 3
to mean "check for read and write permission on the file and return
a file descriptor that can't be used for reading or writing."
Currently, the NFSv4 code will ask the server to open the file,
and will use an incorrect share access mode of 0. Since it has
an incorrect share access mode, the client later forgets to send
a corresponding close, meaning it can leak stateids on the server.
Fixes: ce4ef7c0a8 ("NFS: Split out NFS v4 file operations")
Cc: stable@vger.kernel.org # 3.6+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When mapping the NFSv4 context to an open mode and access mode,
we need to treat the FMODE_EXEC flag differently. For the open
mode, FMODE_EXEC means we need read share access. For the access
mode checking, we need to verify that the user actually has
execute access.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pull vfs fixlet from Al Viro:
"Fix bogus default y in Kconfig (VALIDATE_FS_PARSER)
That thing should not be turned on by default, especially since it's
not quiet in case it finds no problems. Geert has sent the obvious fix
quite a few times, but it fell through the cracks"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: VALIDATE_FS_PARSER should default to n
failures on high-memory machines and fixing the DRC over RDMA.
-----BEGIN PGP SIGNATURE-----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=f2gw
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Two more quick bugfixes for nfsd: fixing a regression causing mount
failures on high-memory machines and fixing the DRC over RDMA"
* tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix overflow causing non-working mounts on 1 TB machines
svcrdma: Ignore source port when computing DRC hash
Dont support 'MAP_SYNC' with non-DAX files and DAX files
with asynchronous dax_device. Virtio pmem provides
asynchronous host page cache flush mechanism. We don't
support 'MAP_SYNC' with virtio pmem and xfs.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dont support 'MAP_SYNC' with non-DAX files and DAX files
with asynchronous dax_device. Virtio pmem provides
asynchronous host page cache flush mechanism. We don't
support 'MAP_SYNC' with virtio pmem and ext4.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The xattr scrubber functions use the temporary memory buffer either for
storing bitmaps or for testing if attribute value extraction works. The
bitmap code always zeroes what it needs and the value extraction sets
the buffer contents, so it's not necessary to waste CPU time zeroing on
allocation.
Note that while we never read the contents that the attr value
extraction function sets, we do need to call it to check the remote
attribute header and CRCs to check for corruption.
A flame graph analysis showed that we were spending 7% of a xfs_scrub
run (the whole program, not just the attr scrubber itself) allocating
and zeroing 64k segments needlessly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In examining a flame graph of time spent running xfs_scrub on various
filesystems, I noticed that we spent nearly 7% of the total runtime on
allocating a zeroed 65k buffer for every SCRUB_TYPE_XATTR invocation.
We do this even if none of the attribute values were anywhere near 64k
in size, even if there were no attribute blocks to check space on, and
even if it just turns out there are no attributes at all.
Therefore, rearrange the xattr buffer setup code to support reallocating
with a bigger buffer and redistribute the callers of that function so
that we only allocate memory just prior to needing it, and only allocate
as much as we need. If we can't get memory with the ILOCK held we'll
bail out with EDEADLOCK which will allocate the maximum memory.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move the code that allocates memory buffers for the extended attribute
scrub code into a separate function so we can reduce memory allocations
in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Replace the open-coded attribute buffer pointer calculations with helper
functions to make it more obvious what we're doing with our freeform
memory allocation w.r.t. either storing xattr values or computing btree
block free space.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we're iterating all the attributes using the built-in xattr
iterator, we can use the seen_enough variable to pass error codes back
to the main scrub function instead of flattening them into 0/1. This
will be used in a more exciting fashion in upcoming patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Currently if the allocation of roots or tmp_ulist fails the error handling
does not free up the allocation of path causing a memory leak. Fix this and
other similar leaks by moving the call of btrfs_free_path from label out
to label out_free_ulist.
Kudos to David Sterba for spotting the issue in my original fix and suggesting
the correct way to fix the leak and Anand Jain for spotting a double free
issue.
Addresses-Coverity: ("Resource leak")
Fixes: 5911c8fe05 ("btrfs: fiemap: preallocate ulists for btrfs_check_shared")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
CONFIG_VALIDATE_FS_PARSER is a debugging tool to check that the parser
tables are vaguely sane. It was set to default to 'Y' for the moment to
catch errors in upcoming fs conversion development.
Make sure it is not enabled by default in the final release of v5.1.
Fixes: 31d921c7fb ("vfs: Add configuration parser helpers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Fix xarray entry association for mixed mappings
-----BEGIN PGP SIGNATURE-----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=NNXl
-----END PGP SIGNATURE-----
Merge tag 'dax-fix-5.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fix from Dan Williams:
"A single dax fix that has been soaking awaiting other fixes under
discussion to join it. As it is getting late in the cycle lets proceed
with this fix and save follow-on changes for post-v5.3-rc1.
- Fix xarray entry association for mixed mappings"
* tag 'dax-fix-5.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix xarray entry association for mixed mappings
When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock.
This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by
userfaultfd_ctx_read(), which in turn can be waiting for
userfaultfd_ctx::fault_pending_wqh.lock or
userfaultfd_ctx::event_wqh.lock.
But elsewhere the fault_pending_wqh and event_wqh locks are taken with
IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep
reports that a deadlock is possible.
Fix it by always disabling IRQs when taking the fault_pending_wqh and
event_wqh locks.
Commit ae62c16e10 ("userfaultfd: disable irqs when taking the
waitqueue lock") didn't fix this because it only accounted for the
fd_wqh lock, not the other locks nested inside it.
Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org
Fixes: bfe4037e72 ("aio: implement IOCB_CMD_POLL")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com
Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com
Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No point having two call sites (earlier in init_rootfs() from
mnt_init() in case we are going to use shmem-style rootfs,
later from do_basic_setup() unconditionally), along with the
logics in shmem_init() itself to make the second call a no-op...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
init_mount_tree() can get to rootfs_fs_type directly and that simplifies
a lot of things. We don't need to register it, we don't need to look
it up *and* we don't need to bother with preventing subsequent userland
mounts. That's the way we should've done that from the very beginning.
There is a user-visible change, namely the disappearance of "rootfs"
from /proc/filesystems. Note that it's been unmountable all along
and it didn't show up in /proc/mounts; however, it *is* a user-visible
change and theoretically some script might've been using its presence
in /proc/filesystems to tell 2.4.11+ from earlier kernels.
*IF* any complaints about behaviour change do show up, we could fake
it in /proc/filesystems. I very much doubt we'll have to, though.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
the only thing done by the latter is making ramfs visible
to mount(2); we don't need it there - rootfs is separate
and, in fact, made visible to mount(2) in the same init_rootfs().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the openpromfs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the efivarfs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
[AV: get rid of efivarfs_sb nonsense - it has never been used]
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Matthew Garrett <matthew.garrett@nebula.com>
cc: Jeremy Kerr <jk@ozlabs.org>
cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
cc: linux-efi@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the configfs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Joel Becker <jlbec@evilplan.org>
cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the binfmt_misc filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is just two functions, put it in root-tree.c since it involves root
items.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have code for data and metadata reservations for delalloc. There's
quite a bit of code here, and it's used in a lot of places so I've
separated it out to it's own file. inode.c and file.c are already
pretty large, and this code is complicated enough to live in its own
space.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move this into transaction.c with the rest of the transaction related
code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These belong with the delayed refs related code, not in extent-tree.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Simplification. No point passing the tree variable when it can be
evaluated from inode. The tests now use the io_tree from btrfs_inode as
opposed to creating one.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Create a new bulk ireq flag that enables userspace to ask us for a
special inode number instead of interpreting @ino as a literal inode
number. This enables us to query the root inode easily.
The reason for adding the ability to query specifically the root
directory inode is that certain programs (xfsdump and xfsrestore) want
to confirm when they've been pointed to the root directory. The
userspace code assumes the root directory is always the first result
from calling bulkstat with lastino == 0, but this isn't true if the
(initial btree roots + initial AGFL + inode alignment padding) is itself
long enough to be allocated to new inodes if all of those blocks should
happen to be free at the same time. Rather than make userspace guess
at internal filesystem state, we provide a direct query.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a new xfs_bulk_ireq flag to constrain the iteration to a single AG.
If the passed-in startino value is zero then we start with the first
inode in the AG that the user passes in; otherwise, we iterate only
within the same AG as the passed-in inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Stephen writes:
After merging the driver-core tree, today's linux-next build (x86_64
allmodconfig) produced this warning:
fs/orangefs/orangefs-debugfs.c: In function 'orangefs_debugfs_init':
fs/orangefs/orangefs-debugfs.c:193:1: warning: label 'out' defined but not used [-Wunused-label]
out:
^~~
fs/orangefs/orangefs-debugfs.c: In function 'orangefs_kernel_debug_init':
fs/orangefs/orangefs-debugfs.c:204:17: warning: unused variable 'ret' [-Wunused-variable]
struct dentry *ret;
^~~
Fix this up and change the return type of the function to void as it can
not fail, which cleans up some more code and variables as well.
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: devel@lists.orangefs.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f095adba36 ("orangefs: no need to check return value of debugfs_create functions")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen writes:
After merging the driver-core tree, today's linux-next build (arm
multi_v7_defconfig) produced this warning:
fs/ubifs/debug.c: In function 'dbg_debugfs_init_fs':
fs/ubifs/debug.c:2812:6: warning: unused variable 'err' [-Wunused-variable]
int err, n;
^~~
So fix this up properly.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a new "v5" inode group structure that fixes the alignment
and padding problems of the existing structure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Introduce a new version of the in-core bulkstat structure that supports
our new v5 format features. This structure also fills the gaps in the
previous structure. We leave wiring up the ioctls for the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Rename the bulkstat functions to 'fsbulkstat' so that they match the
ioctl names. We will be introducing a new set of bulkstat/inumbers
ioctls soon, and it will be important to keep the names straight.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Remove xfs_bstat_t, xfs_fsop_bulkreq_t, xfs_inogrp_t, and similarly
named compat typedefs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Decode the implementation ID and display in nfsd/clients/#/info. It may
be help identify the client. It won't be used otherwise.
(When this went into the protocol, I thought the implementation ID would
be a slippery slope towards implementation-specific workarounds as with
the http user-agent. But I guess I was wrong, the risk seems pretty low
now.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv4 clients are automatically expired and all their locks removed if
they don't contact the server for a certain amount of time (the lease
period, 90 seconds by default).
There can still be situations where that's not enough, so allow
userspace to force expiry by writing "expire\n" to the new
nfsd/client/#/ctl file.
(The generic "ctl" name is because I expect we may want to allow other
operations on clients in the future.)
The write will not return until the client is expired and all of its
locks and other state removed.
The fault injection code also provides a way of expiring clients, but it
fails if there are any in-progress RPC's referencing the client. Also,
its method of selecting a client to expire is a little more
primitive--it uses an IP address, which can't always uniquely specify an
NFSv4 client.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a nfsd/clients/#/opens file to list some information about all the
opens held by the given client, including open modes, device numbers,
inode numbers, and open owners.
Open owners are totally opaque but seem to sometimes have some useful
ascii strings included, so passing through printable ascii characters
and escaping the rest seems useful while still being machine-readable.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add ip address, full client-provided identifier, and minor version.
There's much more that could possibly be useful but this is a start.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I'm exposing some information about NFS clients in pseudofiles. I
expect to eventually have simple tools to help read those pseudofiles.
But it's also helpful if the raw files are human-readable to the extent
possible. It aids debugging and makes them usable on systems that don't
have the latest nfs-utils.
A minor challenge there is opaque client-generated protocol objects like
state owners and client identifiers. Some clients generate those to
include handy information in plain ascii. But they may also include
arbitrary byte sequences.
I think the simplest approach is to limit to isprint(c) && isascii(c)
and escape everything else.
That means you can just cat the file and get something that looks OK.
Also, I'm trying to keep these files legal YAML, which requires them to
UTF-8, and this is a simple way to guarantee that.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
rpc_copy_addr() copies only the IP address and misses any port numbers.
It seems potentially useful to keep the port number around too.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want clientid's on the wire to be randomized for reasons explained in
ebd7c72c63 "nfsd: randomize SETCLIENTID reply to help distinguish
servers". But I'd rather have mostly small integers for the clients/
directory.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Keep a second reference count which is what is really used to decide
when to free the client's memory.
Next I'm going to add an nfsd/clients/ directory with a subdirectory for
each NFSv4 client. File objects under nfsd/clients/ will hold these
references.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rename this to a more descriptive name: it counts the number of
in-progress rpc's referencing this client.
Next I'm going to add a second refcount with a slightly different use.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Keep around one internal mount of the nfsd filesystem so that we can add
stuff to it when clients come and go, regardless of whether anyone has
it mounted.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The failure to unregister the shrinker results will result in corruption
when the nfsd_net is freed.
Also clean up the drc_slab while we're here.
Reported-by: syzbot+83a43746cebef3508b49@syzkaller.appspotmail.com
Fixes: db17b61765c2 ("nfsd4: drc containerization")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit bf8d909705 "nfsd: Decode and send 64bit time values" fixed the
code without updating the comment.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After commit 95582b0083 "vfs: change inode times to use struct
timespec64" there are spots in the NFSv4 decoding where we decode the
protocol into a struct timeval and then convert that into a timeval64.
That's unnecesary in the NFSv4 case since the on-the-wire protocol also
uses 64-bit values. So just fix up our code to use timeval64 everywhere.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix sparse warnings:
fs/lockd/clntproc.c:57:6: warning: symbol 'nlmclnt_put_lockowner' was not declared. Should it be static?
fs/lockd/svclock.c:409:35: warning: symbol 'nlmsvc_lock_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After the update to use nlm_lockowners for the NLM server, there are no
more users of lm_compare_owner and lm_owner_key.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use the pid of lockd instead of the remote lock's svid for the fl_pid for
local POSIX locks. This allows proper enumeration of which local process
owns which lock. The svid is meaningless to local lock readers.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that the NLM server allocates an nlm_lockowner for fl_owner, there's
no need for special hashing or comparison.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Do as the NLM client: allocate and track a struct nlm_lockowner for use as
the fl_owner for locks created by the NLM sever. This allows us to keep
the svid within this structure for matching locks, and will allow us to
track the pid of lockd in a future patch. It should also allow easier
reference of the nlm_host in conflicting locks, and simplify lock hashing
and comparison.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
[bfields@redhat.com: fix type of some error returns]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nlm_lockowner structure that the client uses to track locks is
generally useful to the server as well. Very similar functions to handle
allocation and tracking of the nlm_lockowner will follow. Rename the client
functions for clarity.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After 89a26b3d29 "nfsd: split DRC global spinlock into per-bucket
locks", there is no longer a single global spinlock to protect these
stats.
So, really we need to fix that. For now, at least fix the comment.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfsd duplicate reply cache should not be shared between network
namespaces.
The most straightforward way to fix this is just to move every global in
the code to per-net-namespace memory, so that's what we do.
Still todo: sort out which members of nfsd_stats should be global and
which per-net-namespace.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since commit 10a68cdf10 (nfsd: fix performance-limiting session
calculation) (Linux 5.1-rc1 and 4.19.31), shares from NFS servers with
1 TB of memory cannot be mounted anymore. The mount just hangs on the
client.
The gist of commit 10a68cdf10 is the change below.
-avail = clamp_t(int, avail, slotsize, avail/3);
+avail = clamp_t(int, avail, slotsize, total_avail/3);
Here are the macros.
#define min_t(type, x, y) __careful_cmp((type)(x), (type)(y), <)
#define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi)
`total_avail` is 8,434,659,328 on the 1 TB machine. `clamp_t()` casts
the values to `int`, which for 32-bit integers can only hold values
−2,147,483,648 (−2^31) through 2,147,483,647 (2^31 − 1).
`avail` (in the function signature) is just 65536, so that no overflow
was happening. Before the commit the assignment would result in 21845,
and `num = 4`.
When using `total_avail`, it is causing the assignment to be
18446744072226137429 (printed as %lu), and `num` is then 4164608182.
My next guess is, that `nfsd_drc_mem_used` is then exceeded, and the
server thinks there is no memory available any more for this client.
Updating the arguments of `clamp_t()` and `min_t()` to `unsigned long`
fixes the issue.
Now, `avail = 65536` (before commit 10a68cdf10 `avail = 21845`), but
`num = 4` remains the same.
Fixes: c54f24e338 (nfsd: fix performance-limiting session calculation)
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change return types of below functions as they never fails
xfs_log_mount_cancel
xlog_recover_cancel
xlog_recover_cancel_intents
fix below issue reported by coccicheck
fs/xfs/xfs_log_recover.c:4886:7-12: Unneeded variable: "error". Return
"0" on line 4926
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a pwork destroy function that uses polling instead of
uninterruptible sleep to wait for work items to finish so that we can
touch the softlockup watchdog. IOWs, gross hack.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
This cleanup allows the return value of the functions to be made void,
as no logic should care if these files succeed or not.
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Sage Weil <sage@redhat.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612145538.GA18772@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612152120.GA17450@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: devel@lists.orangefs.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612152204.GA17511@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612152603.GB18440@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a common "debugfs: " prefix for all pr_* calls in a single place.
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190703071653.2799-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As it is not recommended that debugfs calls be checked, it was pointed
out that major errors should still be logged somewhere so that
developers and users have a chance to figure out what went wrong. To
help with this, error logging has been added to the debugfs core so that
it is not needed to be present in every individual file that calls
debugfs.
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190703071653.2799-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create a parallel iwalk implementation and switch quotacheck to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memset, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memset.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Link: https://lore.kernel.org/r/20190703131727.25735-1-huangfq.daxian@gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Rewrite gfs2_allocate_page_backing to call gfs2_iomap_get_alloc and operate on
struct iomap directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
No need to indirect through get_blocks and buffer_heads when we can just use
the iomap version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
There is no need to keep these two functions separate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The only difference between the two is that gfs2_ordered_aops sets the
set_page_dirty method to __set_page_dirty_buffers, but given that
__set_page_dirty_buffers is the default, if no method is set, there is no need
to to do that. Merge the two sets of operations into one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-----BEGIN PGP SIGNATURE-----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=1zkr
-----END PGP SIGNATURE-----
Merge tag '5.2-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French:
"SMB3 fix (for stable as well) for crash mishandling one of the Windows
reparse point symlink tags"
* tag '5.2-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix crash querying symlinks stored as reparse-points
This function was overlooked when the write_begin and write_end address space
operations were removed as part of gfs2's iomap conversion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Without casting page->index to a guaranteed 64-bit type, the value might be
treated as 32-bit on 32-bit platforms and thus get truncated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch allows fallocate to allocate physical blocks for pinned file.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The discard thread should issue upto dpolicy->max_requests at once
and wait for all those discard requests at once it reaches
dpolicy->max_requests. It should then sleep for dpolicy->min_interval
timeout before issuing the next batch of discard requests. But in the
current code of is_idle(), it checks for dcc_info->queued_discard and
aborts issuing the discard batch of max_requests. This
dcc_info->queued_discard will be true always once one discard command
is issued.
It is thus resulting into this type of discard request pattern -
- Issue discard request#1
- is_idle() returns false, discard thread waits for request#1 and then
sleeps for min_interval 50ms.
- Issue discard request#2
- is_idle() returns false, discard thread waits for request#2 and then
sleeps for min_interval 50ms.
- and so on for all other discard requests, assuming f2fs is idle w.r.t
other conditions.
With this fix, the pattern will look like this -
- Issue discard request#1
- Issue discard request#2
and so on upto max_requests of 8
- Issue discard request#8
- wait for min_interval 50ms.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Two paths to update quota and f2fs_lock_op:
1.
- lock_op
| - quota_update
`- unlock_op
2.
- quota_update
- lock_op
`- unlock_op
But, we need to make a transaction on quota_update + lock_op in #2 case.
So, this patch introduces:
1. lock_op
2. down_write
3. check __need_flush
4. up_write
5. if there is dirty quota entries, flush them
6. otherwise, good to go
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If xattr is corrupted, let's print kernel message and set SBI_NEED_FSCK
for further repair.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs uses EFAULT as error number to indicate filesystem is corrupted
all the time, but generic filesystems use EUCLEAN for such condition,
we need to change to follow others.
This patch adds two new macros as below to wrap more generic error
code macros, and spread them in code.
EFSBADCRC EBADMSG /* Bad CRC detected */
EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Replace the open-coded divisions with round-up by calls to the
DIV_ROUND_UP() helper macro.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Pavel reported, once we detect filesystem inconsistency in
f2fs_inplace_write_data(), it will be better to print kernel message as
we did in other places.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- Add and use f2fs_<level> macros
- Convert f2fs_msg to f2fs_printk
- Remove level from f2fs_printk and embed the level in the format
- Coalesce formats and align multi-line arguments
- Remove unnecessary duplicate extern f2fs_msg f2fs.h
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This ioctl shrinks a given length (aligned to sections) from end of the
main area. Any cursegs and valid blocks will be moved out before
invalidating the range.
This feature can be used for adjusting partition sizes online.
History of the patch:
Sahitya Tummala:
- Add this ioctl for f2fs_compat_ioctl() as well.
- Fix debugfs status to reflect the online resize changes.
- Fix potential race between online resize path and allocate new data
block path or gc path.
Others:
- Rename some identifiers.
- Add some error handling branches.
- Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range.
- Implement this interface as ext4's, and change the parameter from shrunk
bytes to new block count of F2FS.
- During resizing, force to empty sit_journal and forbid adding new
entries to it, in order to avoid invalid segno in journal after resize.
- Reduce sbi->user_block_count before resize starts.
- Commit the updated superblock first, and then update in-memory metadata
only when the former succeeds.
- Target block count must align to sections.
- Write checkpoint before and after committing the new superblock, w/o
CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if
resize fails after the new superblock is committed.
- In free_segment_range(), reduce granularity of gc_mutex.
- Add protection on curseg migration.
- Add freeze_bdev() and thaw_bdev() for resize fs.
- Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation.
- Recover super_block and FS metadata when resize fails.
- No need to clear CP_FSCK_FLAG in update_ckpt_flags().
- Clean up the sb and fs metadata update functions for resize_fs.
Geert Uytterhoeven:
- Use div_u64*() for 64-bit divisions
Arnd Bergmann:
- Not all architectures support get_user() with a 64-bit argument:
ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined!
Use copy_from_user() here, this will always work.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs field in ext4_sb_ktype
and ext4_feat_ktype with default_groups. Use the ATTRIBUTE_GROUPS macro
to create ext4_groups and ext4_feat_groups.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change return type of ecryptfs_process_flags from int to void as it
never fails.
fixes below issue reported by coccicheck
s/ecryptfs/crypto.c:870:5-7: Unneeded variable: "rc". Return "0" on line
883
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
[tyhicks: Remove the return value line from the function documentation]
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
The code hasn't been used since it was added to the tree, and doesn't
appear to actually be usable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have generic functions to walk inode records, refactor the
INUMBERS implementation to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor xfs_iwalk_ag_start and xfs_iwalk_ag so that the bits that are
particular to bulkstat (trimming the start irec, starting inode
readahead, and skipping empty groups) can be controlled via flags in the
iwag structure.
This enables us to add a new function to walk all inobt records which
will be used for the new INUMBERS implementation in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In preparation for reusing the iwalk code for the inogrp walking code
(aka INUMBERS), move the initial inobt lookup and retrieval code out of
xfs_iwalk_grab_ichunk so that we call the masking code only when we need
to trim out the inodes that came before the cursor in the inobt record
(aka BULKSTAT).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor xfs_iwalk_ichunk_ra to avoid long conditionals.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that the inode chunk grabbing function is a static function in the
iwalk code, change its behavior so that @agino is the inode where we
want to /start/ the iteration. This reduces cognitive friction with the
callers and simplifes the code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we've reworked the bulkstat code to use iwalk, we can move the
old bulkstat ichunk helpers to xfs_iwalk.c. No functional changes here.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The existing inode walk prefetch is based on the old bulkstat code,
which simply allocated 4 pages worth of memory and prefetched that many
inobt records, regardless of however many inodes the caller requested.
65536 inodes is a lot to prefetch (~32M on x64, ~512M on arm64) so let's
scale things down a little more intelligently based on the number of
inodes requested, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create a new ibulk structure incore to help us deal with bulk inode stat
state tracking and then convert the bulkstat code to use the new iwalk
iterator. This disentangles inode walking from bulk stat control for
simpler code and enables us to isolate the formatter functions to the
ioctl handling code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When userspace passes in a @lastip pointer we should copy the results
back, even if the @ocount pointer is NULL.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Convert quotacheck to use the new iwalk iterator to dig through the
inodes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create a new iterator function to simplify walking inodes in an XFS
filesystem. This new iterator will replace the existing open-coded
walking that goes on in various places.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Currently, xfs doesn't have generic error codes defined for "stop
iterating"; we just reuse the XFS_BTREE_QUERY_* return values. This
looks a little weird if we're not actually iterating a btree index.
Before we start adding more iterators, we should create general
XFS_ITER_{CONTINUE,ABORT} return values and define the XFS_BTREE_QUERY_*
ones from that.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This moves everything out of extent-tree.c to block-rsv.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
block_rsv_release_bytes() is the internal to the block_rsv code, and
shouldn't be called directly by anything else. Switch all users to the
exported helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This works for all callers already, but if we wanted to use the helper
for the global_block_rsv it would end up trying to refill itself. Fix
the logic to be able to be used no matter which block rsv is passed in
to this helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The delalloc reserve stuff calls this directly because it cares about
the qgroup accounting stuff, so export it so we can move it around. Fix
btrfs_block_rsv_release() to just be a static inline since it just calls
__btrfs_block_rsv_release() with NULL for the qgroup stuff.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is used in a few places, we need to make sure it's exported so we
can move it around.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prep work for separating out all of the block_rsv related code into its
own file.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need an if-else-if chain where we can use a simple OR since
both conditions are performing the same action. The short-circuit for OR
will ensure that if the first condition is true, can_overcommit() is not
called.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we've moved all of the users to space-info.c, unexport it and
name it back to can_overcommit.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This moves all of the metadata reservation code into space-info.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We'll need this exported so we can use it in all the various was we need
to use it. This is prep work to move reserve_metadata_bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are going to need this to move the metadata reservation stuff to
space_info.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we've moved all the pre-requisite stuff, move these two
functions.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Also rename it to btrfs_space_info_update_* so it's clear what we're
updating.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the first piece of moving the space reservation code to
space-info.c
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These are the basic init and lookup functions and some helper functions,
fairly straightforward before the bad stuff starts.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prep work for consolidating all of the space_info code into one file.
We need to export these so multiple files can use them.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Really we just need the enum, but as we break more things up it'll help
to have this external to extent-tree.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Migrate the struct definition and the one helper that's in ctree.h into
space-info.h
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The block device is passed around for the only purpose to set it in new
bios. Move the assignment one level up. This is a preparatory patch for
further bdev cleanups.
Signed-off-by: David Sterba <dsterba@suse.com>
Minimum stripe count matches the minimum devices required for a given
profile. The open coded assignments match the raid_attr table.
What's changed here is the meaning for RAID5/6. Previously their
min_stripes would be 1, while newly it's devs_min. This however shold be
the same as before because it's not possible to create filesystem on
fewer devices than the raid_attr table allows.
There's no adjustment regarding the parity stripes (like
calc_data_stripes does), because we're interested in overall space that
would fit on the devices.
Missing devices make no difference for the whole calculation, we have
the size stored in the structures.
Signed-off-by: David Sterba <dsterba@suse.com>
Special case for DUP can be replaced by lookup to the attribute table,
where the dev_stripes is the right coefficient.
Signed-off-by: David Sterba <dsterba@suse.com>
A few more instances whre we don't need to specify the values as long as
they are the same that enum assigns automatically. All of the enums are
in-memory only and nothing relies on the exact values.
Signed-off-by: David Sterba <dsterba@suse.com>
We have been seeing issues in production where a cleaner script will end
up unlinking a bunch of files that have pending iputs. This means they
will get their final iput's run at btrfs-cleaner time and thus are not
throttled, which impacts the workload.
Since we are unlinking these files we can just drop the delayed iput at
unlink time. We are already holding a reference to the inode so this
will not be the final iput and thus is completely safe to do at this
point. Doing this means we are more likely to be doing the final iput
at unlink time, and thus will get the IO charged to the caller and get
throttled appropriately without affecting the main workload.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the range for which we are punching a hole covers only part of a page,
we end up updating the inode item but we skip the update of the inode's
iversion, mtime and ctime. Fix that by ensuring we update those properties
of the inode.
A patch for fstests test case generic/059 that tests this as been sent
along with this fix.
Fixes: 2aaa665581 ("Btrfs: add hole punching")
Fixes: e8c1c76e80 ("Btrfs: add missing inode update when punching hole")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to avoid searches on a log tree when unlinking an inode, we check
if the inode being unlinked was logged in the current transaction, as well
as the inode of its parent directory. When any of the inodes are logged,
we proceed to delete directory items and inode reference items from the
log, to ensure that if a subsequent fsync of only the inode being unlinked
or only of the parent directory when the other is not fsync'ed as well,
does not result in the entry still existing after a power failure.
That check however is not reliable when one of the inodes involved (the
one being unlinked or its parent directory's inode) is evicted, since the
logged_trans field is transient, that is, it is not stored on disk, so it
is lost when the inode is evicted and loaded into memory again (which is
set to zero on load). As a consequence the checks currently being done by
btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log() always
return true if the inode was evicted before, regardless of the inode
having been logged or not before (and in the current transaction), this
results in the dentry being unlinked still existing after a log replay
if after the unlink operation only one of the inodes involved is fsync'ed.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir
$ touch /mnt/dir/foo
$ xfs_io -c fsync /mnt/dir/foo
# Keep an open file descriptor on our directory while we evict inodes.
# We just want to evict the file's inode, the directory's inode must not
# be evicted.
$ ( cd /mnt/dir; while true; do :; done ) &
$ pid=$!
# Wait a bit to give time to background process to chdir to our test
# directory.
$ sleep 0.5
# Trigger eviction of the file's inode.
$ echo 2 > /proc/sys/vm/drop_caches
# Unlink our file and fsync the parent directory. After a power failure
# we don't expect to see the file anymore, since we fsync'ed the parent
# directory.
$ rm -f $SCRATCH_MNT/dir/foo
$ xfs_io -c fsync /mnt/dir
<power failure>
$ mount /dev/sdb /mnt
$ ls /mnt/dir
foo
$
--> file still there, unlink not persisted despite explicit fsync on dir
Fix this by checking if the inode has the full_sync bit set in its runtime
flags as well, since that bit is set everytime an inode is loaded from
disk, or for other less common cases such as after a shrinking truncate
or failure to allocate extent maps for holes, and gets cleared after the
first fsync. Also consider the inode as possibly logged only if it was
last modified in the current transaction (besides having the full_fsync
flag set).
Fixes: 3a5f1d458a ("Btrfs: Optimize btree walking while logging inodes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Presently btrfs_map_block is used not only to do everything necessary to
map a bio to the underlying allocation profile but it's also used to
identify how much data could be written based on btrfs' stripe logic
without actually submitting anything. This is achieved by passing NULL
for 'bbio_ret' parameter.
This patch refactors all callers that require just the mapping length
by switching them to using btrfs_io_geometry instead of calling
btrfs_map_block with a special NULL value for 'bbio_ret'. No functional
change.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a structure that holds various parameters for IO calculations and a
helper that fills the values. This will help further refactoring and
reduction of functions that in some way open-coded the calculations.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the messages printed after setting an incompat feature are
cryptis, we can easily make it better as the textual description is
passed to the helpers. Old:
setting 128 feature flag
updated:
setting incompat feature flag for RAID56 (0x80)
Signed-off-by: David Sterba <dsterba@suse.com>
gcc sometimes can't determine whether a variable has been initialized
when both the initialization and the use are conditional:
fs/btrfs/props.c: In function 'inherit_props':
fs/btrfs/props.c:389:4: error: 'num_bytes' may be used uninitialized in this function [-Werror=maybe-uninitialized]
btrfs_block_rsv_release(fs_info, trans->block_rsv,
This code is fine. Unfortunately, I cannot think of a good way to
rephrase it in a way that makes gcc understand this, so I add a bogus
initialization the way one should not.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ gcc 8 and 9 don't emit the warning ]
Signed-off-by: David Sterba <dsterba@suse.com>
Send always operates on read-only trees and always expected that while it
is in progress, nothing changes in those trees. Due to that expectation
and the fact that send is a read-only operation, it operates on commit
roots and does not hold transaction handles. However relocation can COW
nodes and leafs from read-only trees, which can cause unexpected failures
and crashes (hitting BUG_ONs). while send using a node/leaf, it gets
COWed, the transaction used to COW it is committed, a new transaction
starts, the extent previously used for that node/leaf gets allocated,
possibly for another tree, and the respective extent buffer' content
changes while send is still using it. When this happens send normally
fails with EIO being returned to user space and messages like the
following are found in dmesg/syslog:
[ 3408.699121] BTRFS error (device sdc): parent transid verify failed on 58703872 wanted 250 found 253
[ 3441.523123] BTRFS error (device sdc): did not find backref in send_root. inode=63211, offset=0, disk_byte=5222825984 found extent=5222825984
Other times, less often, we hit a BUG_ON() because an extent buffer that
send is using used to be a node, and while send is still using it, it
got COWed and got reused as a leaf while send is still using, producing
the following trace:
[ 3478.466280] ------------[ cut here ]------------
[ 3478.466282] kernel BUG at fs/btrfs/ctree.c:1806!
[ 3478.466965] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[ 3478.467635] CPU: 0 PID: 2165 Comm: btrfs Not tainted 5.0.0-btrfs-next-46 #1
[ 3478.468311] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[ 3478.469681] RIP: 0010:read_node_slot+0x122/0x130 [btrfs]
(...)
[ 3478.471758] RSP: 0018:ffffa437826bfaa0 EFLAGS: 00010246
[ 3478.472457] RAX: ffff961416ed7000 RBX: 000000000000003d RCX: 0000000000000002
[ 3478.473151] RDX: 000000000000003d RSI: ffff96141e387408 RDI: ffff961599b30000
[ 3478.473837] RBP: ffffa437826bfb8e R08: 0000000000000001 R09: ffffa437826bfb8e
[ 3478.474515] R10: ffffa437826bfa70 R11: 0000000000000000 R12: ffff9614385c8708
[ 3478.475186] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 3478.475840] FS: 00007f8e0e9cc8c0(0000) GS:ffff9615b6a00000(0000) knlGS:0000000000000000
[ 3478.476489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3478.477127] CR2: 00007f98b67a056e CR3: 0000000005df6005 CR4: 00000000003606f0
[ 3478.477762] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3478.478385] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3478.479003] Call Trace:
[ 3478.479600] ? do_raw_spin_unlock+0x49/0xc0
[ 3478.480202] tree_advance+0x173/0x1d0 [btrfs]
[ 3478.480810] btrfs_compare_trees+0x30c/0x690 [btrfs]
[ 3478.481388] ? process_extent+0x1280/0x1280 [btrfs]
[ 3478.481954] btrfs_ioctl_send+0x1037/0x1270 [btrfs]
[ 3478.482510] _btrfs_ioctl_send+0x80/0x110 [btrfs]
[ 3478.483062] btrfs_ioctl+0x13fe/0x3120 [btrfs]
[ 3478.483581] ? rq_clock_task+0x2e/0x60
[ 3478.484086] ? wake_up_new_task+0x1f3/0x370
[ 3478.484582] ? do_vfs_ioctl+0xa2/0x6f0
[ 3478.485075] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[ 3478.485552] do_vfs_ioctl+0xa2/0x6f0
[ 3478.486016] ? __fget+0x113/0x200
[ 3478.486467] ksys_ioctl+0x70/0x80
[ 3478.486911] __x64_sys_ioctl+0x16/0x20
[ 3478.487337] do_syscall_64+0x60/0x1b0
[ 3478.487751] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 3478.488159] RIP: 0033:0x7f8e0d7d4dd7
(...)
[ 3478.489349] RSP: 002b:00007ffcf6fb4908 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[ 3478.489742] RAX: ffffffffffffffda RBX: 0000000000000105 RCX: 00007f8e0d7d4dd7
[ 3478.490142] RDX: 00007ffcf6fb4990 RSI: 0000000040489426 RDI: 0000000000000005
[ 3478.490548] RBP: 0000000000000005 R08: 00007f8e0d6f3700 R09: 00007f8e0d6f3700
[ 3478.490953] R10: 00007f8e0d6f39d0 R11: 0000000000000202 R12: 0000000000000005
[ 3478.491343] R13: 00005624e0780020 R14: 0000000000000000 R15: 0000000000000001
(...)
[ 3478.493352] ---[ end trace d5f537302be4f8c8 ]---
Another possibility, much less likely to happen, is that send will not
fail but the contents of the stream it produces may not be correct.
To avoid this, do not allow send and relocation (balance) to run in
parallel. In the long term the goal is to allow for both to be able to
run concurrently without any problems, but that will take a significant
effort in development and testing.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory patch for additional RAID1 profiles with more copies. The
mask will contain 3-copy and 4-copy, most of the checks for plain RAID1
work the same for the other profiles.
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Lockdep will report the following circular locking dependency:
WARNING: possible circular locking dependency detected
5.2.0-rc2-custom #24 Tainted: G O
------------------------------------------------------
btrfs/8631 is trying to acquire lock:
000000002536438c (&fs_info->qgroup_ioctl_lock#2){+.+.}, at: btrfs_qgroup_inherit+0x40/0x620 [btrfs]
but task is already holding lock:
000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&fs_info->tree_log_mutex){+.+.}:
__mutex_lock+0x76/0x940
mutex_lock_nested+0x1b/0x20
btrfs_commit_transaction+0x475/0xa00 [btrfs]
btrfs_commit_super+0x71/0x80 [btrfs]
close_ctree+0x2bd/0x320 [btrfs]
btrfs_put_super+0x15/0x20 [btrfs]
generic_shutdown_super+0x72/0x110
kill_anon_super+0x18/0x30
btrfs_kill_super+0x16/0xa0 [btrfs]
deactivate_locked_super+0x3a/0x80
deactivate_super+0x51/0x60
cleanup_mnt+0x3f/0x80
__cleanup_mnt+0x12/0x20
task_work_run+0x94/0xb0
exit_to_usermode_loop+0xd8/0xe0
do_syscall_64+0x210/0x240
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #1 (&fs_info->reloc_mutex){+.+.}:
__mutex_lock+0x76/0x940
mutex_lock_nested+0x1b/0x20
btrfs_commit_transaction+0x40d/0xa00 [btrfs]
btrfs_quota_enable+0x2da/0x730 [btrfs]
btrfs_ioctl+0x2691/0x2b40 [btrfs]
do_vfs_ioctl+0xa9/0x6d0
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x65/0x240
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (&fs_info->qgroup_ioctl_lock#2){+.+.}:
lock_acquire+0xa7/0x190
__mutex_lock+0x76/0x940
mutex_lock_nested+0x1b/0x20
btrfs_qgroup_inherit+0x40/0x620 [btrfs]
create_pending_snapshot+0x9d7/0xe60 [btrfs]
create_pending_snapshots+0x94/0xb0 [btrfs]
btrfs_commit_transaction+0x415/0xa00 [btrfs]
btrfs_mksubvol+0x496/0x4e0 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0xa90/0x2b40 [btrfs]
do_vfs_ioctl+0xa9/0x6d0
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x65/0x240
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Chain exists of:
&fs_info->qgroup_ioctl_lock#2 --> &fs_info->reloc_mutex --> &fs_info->tree_log_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->tree_log_mutex);
lock(&fs_info->reloc_mutex);
lock(&fs_info->tree_log_mutex);
lock(&fs_info->qgroup_ioctl_lock#2);
*** DEADLOCK ***
6 locks held by btrfs/8631:
#0: 00000000ed8f23f6 (sb_writers#12){.+.+}, at: mnt_want_write_file+0x28/0x60
#1: 000000009fb1597a (&type->i_mutex_dir_key#10/1){+.+.}, at: btrfs_mksubvol+0x70/0x4e0 [btrfs]
#2: 0000000088c5ad88 (&fs_info->subvol_sem){++++}, at: btrfs_mksubvol+0x128/0x4e0 [btrfs]
#3: 000000009606fc3e (sb_internal#2){.+.+}, at: start_transaction+0x37a/0x520 [btrfs]
#4: 00000000f82bbdf5 (&fs_info->reloc_mutex){+.+.}, at: btrfs_commit_transaction+0x40d/0xa00 [btrfs]
#5: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs]
[CAUSE]
Due to the delayed subvolume creation, we need to call
btrfs_qgroup_inherit() inside commit transaction code, with a lot of
other mutex hold.
This hell of lock chain can lead to above problem.
[FIX]
On the other hand, we don't really need to hold qgroup_ioctl_lock if
we're in the context of create_pending_snapshot().
As in that context, we're the only one being able to modify qgroup.
All other qgroup functions which needs qgroup_ioctl_lock are either
holding a transaction handle, or will start a new transaction:
Functions will start a new transaction():
* btrfs_quota_enable()
* btrfs_quota_disable()
Functions hold a transaction handler:
* btrfs_add_qgroup_relation()
* btrfs_del_qgroup_relation()
* btrfs_create_qgroup()
* btrfs_remove_qgroup()
* btrfs_limit_qgroup()
* btrfs_qgroup_inherit() call inside create_subvol()
So we have a higher level protection provided by transaction, thus we
don't need to always hold qgroup_ioctl_lock in btrfs_qgroup_inherit().
Only the btrfs_qgroup_inherit() call in create_subvol() needs to hold
qgroup_ioctl_lock, while the btrfs_qgroup_inherit() call in
create_pending_snapshot() is already protected by transaction.
So the fix is to detect the context by checking
trans->transaction->state.
If we're at TRANS_STATE_COMMIT_DOING, then we're in commit transaction
context and no need to get the mutex.
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay reported the following KASAN splat when running btrfs/048:
[ 1843.470920] ==================================================================
[ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0
[ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979
[ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536
[ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1843.476322] Call Trace:
[ 1843.476674] dump_stack+0x7c/0xbb
[ 1843.477132] ? strncmp+0x66/0xb0
[ 1843.477587] print_address_description+0x114/0x320
[ 1843.478256] ? strncmp+0x66/0xb0
[ 1843.478740] ? strncmp+0x66/0xb0
[ 1843.479185] __kasan_report+0x14e/0x192
[ 1843.479759] ? strncmp+0x66/0xb0
[ 1843.480209] kasan_report+0xe/0x20
[ 1843.480679] strncmp+0x66/0xb0
[ 1843.481105] prop_compression_validate+0x24/0x70
[ 1843.481798] btrfs_xattr_handler_set_prop+0x65/0x160
[ 1843.482509] __vfs_setxattr+0x71/0x90
[ 1843.483012] __vfs_setxattr_noperm+0x84/0x130
[ 1843.483606] vfs_setxattr+0xac/0xb0
[ 1843.484085] setxattr+0x18c/0x230
[ 1843.484546] ? vfs_setxattr+0xb0/0xb0
[ 1843.485048] ? __mod_node_page_state+0x1f/0xa0
[ 1843.485672] ? _raw_spin_unlock+0x24/0x40
[ 1843.486233] ? __handle_mm_fault+0x988/0x1290
[ 1843.486823] ? lock_acquire+0xb4/0x1e0
[ 1843.487330] ? lock_acquire+0xb4/0x1e0
[ 1843.487842] ? mnt_want_write_file+0x3c/0x80
[ 1843.488442] ? debug_lockdep_rcu_enabled+0x22/0x40
[ 1843.489089] ? rcu_sync_lockdep_assert+0xe/0x70
[ 1843.489707] ? __sb_start_write+0x158/0x200
[ 1843.490278] ? mnt_want_write_file+0x3c/0x80
[ 1843.490855] ? __mnt_want_write+0x98/0xe0
[ 1843.491397] __x64_sys_fsetxattr+0xba/0xe0
[ 1843.492201] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1843.493201] do_syscall_64+0x6c/0x230
[ 1843.493988] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.495041] RIP: 0033:0x7fa7a8a7707a
[ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48
[ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be
[ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a
[ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003
[ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000
[ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91
[ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff
[ 1843.505268] Allocated by task 3979:
[ 1843.505771] save_stack+0x19/0x80
[ 1843.506211] __kasan_kmalloc.constprop.5+0xa0/0xd0
[ 1843.506836] setxattr+0xeb/0x230
[ 1843.507264] __x64_sys_fsetxattr+0xba/0xe0
[ 1843.507886] do_syscall_64+0x6c/0x230
[ 1843.508429] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.509558] Freed by task 0:
[ 1843.510188] (stack is not available)
[ 1843.511309] The buggy address belongs to the object at ffff888111e369e0
which belongs to the cache kmalloc-8 of size 8
[ 1843.514095] The buggy address is located 2 bytes inside of
8-byte region [ffff888111e369e0, ffff888111e369e8)
[ 1843.516524] The buggy address belongs to the page:
[ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0
[ 1843.519993] flags: 0x4404000010200(slab|head)
[ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300
[ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000
[ 1843.524281] page dumped because: kasan: bad access detected
[ 1843.525936] Memory state around the buggy address:
[ 1843.526975] ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479] ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877] ^
[ 1843.533287] ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874] ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================
This is caused by supplying a too short compression value ('lz') in the
test-case and comparing it to 'lzo' with strncmp() and a length of 3.
strncmp() read past the 'lz' when looking for the 'o' and thus caused an
out-of-bounds read.
Introduce a new check 'btrfs_compress_is_valid_type()' which not only
checks the user-supplied value against known compression types, but also
employs checks for too short values.
Reported-by: Nikolay Borisov <nborisov@suse.com>
Fixes: 272e5326c7 ("btrfs: prop: fix vanished compression property after failed set")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we log an inode, regardless of logging it completely or only that it
exists, we always update it as logged (logged_trans and last_log_commit
fields of the inode are updated). This is generally fine and avoids future
attempts to log it from having to do repeated work that brings no value.
However, if we write data to a file, then evict its inode after all the
dealloc was flushed (and ordered extents completed), rename the file and
fsync it, we end up not logging the new extents, since the rename may
result in logging that the inode exists in case the parent directory was
logged before. The following reproducer shows and explains how this can
happen:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir
$ touch /mnt/dir/foo
$ touch /mnt/dir/bar
# Do a direct IO write instead of a buffered write because with a
# buffered write we would need to make sure dealloc gets flushed and
# complete before we do the inode eviction later, and we can not do that
# from user space with call to things such as sync(2) since that results
# in a transaction commit as well.
$ xfs_io -d -c "pwrite -S 0xd3 0 4K" /mnt/dir/bar
# Keep the directory dir in use while we evict inodes. We want our file
# bar's inode to be evicted but we don't want our directory's inode to
# be evicted (if it were evicted too, we would not be able to reproduce
# the issue since the first fsync below, of file foo, would result in a
# transaction commit.
$ ( cd /mnt/dir; while true; do :; done ) &
$ pid=$!
# Wait a bit to give time for the background process to chdir.
$ sleep 0.1
# Evict all inodes, except the inode for the directory dir because it is
# currently in use by our background process.
$ echo 2 > /proc/sys/vm/drop_caches
# fsync file foo, which ends up persisting information about the parent
# directory because it is a new inode.
$ xfs_io -c fsync /mnt/dir/foo
# Rename bar, this results in logging that this inode exists (inode item,
# names, xattrs) because the parent directory is in the log.
$ mv /mnt/dir/bar /mnt/dir/baz
# Now fsync baz, which ends up doing absolutely nothing because of the
# rename operation which logged that the inode exists only.
$ xfs_io -c fsync /mnt/dir/baz
<power failure>
$ mount /dev/sdb /mnt
$ od -t x1 -A d /mnt/dir/baz
0000000
--> Empty file, data we wrote is missing.
Fix this by not updating last_sub_trans of an inode when we are logging
only that it exists and the inode was not yet logged since it was loaded
from disk (full_sync bit set), this is enough to make btrfs_inode_in_log()
return false for this scenario and make us log the inode. The logged_trans
of the inode is still always setsince that alone is used to track if names
need to be deleted as part of unlink operations.
Fixes: 257c62e1bc ("Btrfs: avoid tree log commit when there are no changes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The incompat bit for RAID56 is set either at mount time or automatically
when the profile is used by balance. The part where the bit is removed
is missing and can be unexpected or undesired when an older kernel is
needed.
This patch will drop the incompat bit after this command, assuming
that RAID5 profile is not used by system or metadata:
$ btrfs balance start -dconvert=raid5 /mnt
$ btrfs balance start -dconvert=raid1 /mnt
This will print "clearing 128 feature flag" to the system log.
The patch is safe for backporting to older kernels.
Reported-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: David Sterba <dsterba@suse.com>
The write_locks is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The spinning_writers is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.
Signed-off-by: David Sterba <dsterba@suse.com>
The blocking_writers is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Turn the comment about required lock into an assertion.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The DAX flag only applies to files and directories, so don't let it get
set for other types of files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Move the extent size hint checks that aren't xfs-specific to the vfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Create a generic checking function for the incoming FS_IOC_FSSETXATTR
fsxattr values so that we can standardize some of the implementation
behaviors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Create a generic function to check incoming FS_IOC_SETFLAGS flag values
and later prepare the inode for updates so that we can standardize the
implementations that follow ext4's flag values.
Note that the efivarfs implementation no longer fails a no-op SETFLAGS
without CAP_LINUX_IMMUTABLE since that's the behavior in ext*.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
sys_move_mount() crashes by dereferencing the pointer MNT_NS_INTERNAL,
a.k.a. ERR_PTR(-EINVAL), if the old mount is specified by fd for a
kernel object with an internal mount, such as a pipe or memfd.
Fix it by checking for this case and returning -EINVAL.
[AV: what we want is is_mounted(); use that instead of making the
condition even more convoluted]
Reproducer:
#include <unistd.h>
#define __NR_move_mount 429
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004
int main()
{
int fds[2];
pipe(fds);
syscall(__NR_move_mount, fds[0], "", -1, "/", MOVE_MOUNT_F_EMPTY_PATH);
}
Reported-by: syzbot+6004acbaa1893ad013f0@syzkaller.appspotmail.com
Fixes: 2db154b3ea ("vfs: syscall: Add move_mount(2) to move mounts around")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
'bio->bi_iter.bi_size' is 'unsigned int', which at most hold 4G - 1
bytes.
Before 07173c3ec2 ("block: enable multipage bvecs"), one bio can
include very limited pages, and usually at most 256, so the fs bio
size won't be bigger than 1M bytes most of times.
Since we support multi-page bvec, in theory one fs bio really can
be added > 1M pages, especially in case of hugepage, or big writeback
with too many dirty pages. Then there is chance in which .bi_size
is overflowed.
Fixes this issue by using bio_full() to check if the added segment may
overflow .bi_size.
Cc: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec2 ("block: enable multipage bvecs")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm
A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe
v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35
Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z
aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW
s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH
VTS5zps=
=huBY
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc6' into for-5.3/block
Merge 5.2-rc6 into for-5.3/block, so we get the same page merge leak
fix. Otherwise we end up having conflicts with future patches between
for-5.3/block and master that touch this area. In particular, it makes
the bio_full() fix hard to backport to stable.
* tag 'v5.2-rc6': (482 commits)
Linux 5.2-rc6
Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
Bluetooth: Fix regression with minimum encryption key size alignment
tcp: refine memory limit test in tcp_fragment()
x86/vdso: Prevent segfaults due to hoisted vclock reads
SUNRPC: Fix a credential refcount leak
Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
net :sunrpc :clnt :Fix xps refcount imbalance on the error path
NFS4: Only set creation opendata if O_CREAT
ARM: 8867/1: vdso: pass --be8 to linker if necessary
KVM: nVMX: reorganize initial steps of vmx_set_nested_state
KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
habanalabs: use u64_to_user_ptr() for reading user pointers
nfsd: replace Jeff by Chuck as nfsd co-maintainer
inet: clear num_timeout reqsk_alloc()
PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present
net: mvpp2: debugfs: Add pmap to fs dump
ipv6: Default fib6_type to RTN_UNICAST when not set
net: hns3: Fix inconsistent indenting
net/af_iucv: always register net_device notifier
...
There are no concerns about locking during the selftests so the locks
are not necessary, but following patches will add lockdep assertions to
add_extent_mapping so this is needed in tests too.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function has a lot of return values and specific conventions making
it cumbersome to understand what's returned. Have a go at documenting
its parameters and return values.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently find_first_clear_extent_bit always returns a range whose
starting value is >= passed 'start'. This implicit trimming behavior is
somewhat subtle and an implementation detail.
Instead, this patch modifies the function such that now it always
returns the range which contains passed 'start' and has the given bits
unset. This range could either be due to presence of existing records
which contains 'start' but have the bits unset or because there are no
records that contain the given starting offset.
This patch also adds test cases which cover find_first_clear_extent_bit
since they were missing up until now.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the first megabyte on a device housing a btrfs filesystem is
exempt from allocation and trimming. Currently this is not a problem
since 'start' is set to 1M at the beginning of btrfs_trim_free_extents
and find_first_clear_extent_bit always returns a range that is >= start.
However, in a follow up patch find_first_clear_extent_bit will be
changed such that it will return a range containing 'start' and this
range may very well be 0...>=1M so 'start'.
Future proof the sole user of find_first_clear_extent_bit by setting
'start' after the function is called. No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The filename:line format is commonly understood by editors and can be
copy&pasted more easily than the current format.
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_print_data_csum_error() still assumed checksums to be 32 bit in
size. Make it size agnostic.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_csum_data() relied on the crc32c() wrapper around the
crypto framework for calculating the CRCs.
As we have our own crypto_shash structure in the fs_info now, we can
directly call into the crypto framework without going trough the wrapper.
This way we can even remove the btrfs_csum_data() and btrfs_csum_final()
wrappers.
The module dependency on crc32c is preserved via MODULE_SOFTDEP("pre:
crc32c"), which was previously provided by LIBCRC32C config option doing
the same.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add boilerplate code for directly including the crypto framework. This
helps us flipping the switch for new algorithms.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have already checked for a valid checksum type before
calling btrfs_check_super_csum(), it can be simplified even further.
While at it get rid of the implicit size assumption of the resulting
checksum as well.
This is a preparation for changing all checksum functionality to use the
crypto layer later.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have factorerd out the superblock checksum type validation,
we can check for supported superblock checksum types before doing the
actual validation of the superblock read from disk.
This leads the path to further simplifications of
btrfs_check_super_csum() later on.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs is only supporting CRC32C as checksumming algorithm. As
this is about to change provide a function to validate the checksum type
in the superblock against all possible algorithms.
This makes adding new algorithms easier as there are fewer places to
adjust when adding new algorithms.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a small helper for btrfs_print_data_csum_error() which formats the
checksum according to it's type for pretty printing.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ shorten macro name ]
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS has the implicit assumption that a checksum in compressed_bio is 4
bytes. While this is true for CRC32C, it is not for any other checksum.
Change the data type to be a byte array and adjust loop index calculation
accordingly.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS has the implicit assumption that a checksum in btrfs_orderd_sums
is 4 bytes. While this is true for CRC32C, it is not for any other
checksum.
Change the data type to be a byte array and adjust loop index
calculation accordingly.
This includes moving the adjustment of 'index' by 'ins_size' in
btrfs_csum_file_blocks() before dividing 'ins_size' by the checksum
size, because before this patch the 'sums' member of 'struct
btrfs_ordered_sum' was 4 Bytes in size and afterwards it is only one
byte.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The CRC checksum in the free space cache is not dependant on the super
block's csum_type field but always a CRC32C.
So use btrfs_crc32c() and btrfs_crc32c_final() instead of
btrfs_csum_data() and btrfs_csum_final() for computing these checksums.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 9678c54388 ("btrfs: Remove custom crc32c init code") removed
the btrfs_crc32c() function, because it was a duplicate of the crc32c()
library function we already have in the kernel.
Resurrect it as a shim wrapper over crc32c() to make following
transformations of the checksumming code in btrfs easier.
Also provide a btrfs_crc32_final() to ease following transformations.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfsic_test_for_metadata() directly calls the crc32c() library function
for calculating the CRC32C checksum, but then uses btrfs_csum_final() to
invert the result.
To ease further refactoring and development around checksumming in BTRFS
convert to calling btrfs_csum_data(), which is a wrapper around
crc32c().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The following script can cause unexpected fsync failure:
#!/bin/bash
dev=/dev/test/test
mnt=/mnt/btrfs
mkfs.btrfs -f $dev -b 512M > /dev/null
mount $dev $mnt -o nospace_cache
# Prealloc one extent
xfs_io -f -c "falloc 8k 64m" $mnt/file1
# Fill the remaining data space
xfs_io -f -c "pwrite 0 -b 4k 512M" $mnt/padding
sync
# Write into the prealloc extent
xfs_io -c "pwrite 1m 16m" $mnt/file1
# Reflink then fsync, fsync would fail due to ENOSPC
xfs_io -c "reflink $mnt/file1 8k 0 4k" -c "fsync" $mnt/file1
umount $dev
The fsync fails with ENOSPC, and the last page of the buffered write is
lost.
[CAUSE]
This is caused by:
- Btrfs' back reference only has extent level granularity
So write into shared extent must be COWed even only part of the extent
is shared.
So for above script we have:
- fallocate
Create a preallocated extent where we can do NOCOW write.
- fill all the remaining data and unallocated space
- buffered write into preallocated space
As we have not enough space available for data and the extent is not
shared (yet) we fall into NOCOW mode.
- reflink
Now part of the large preallocated extent is shared, later write
into that extent must be COWed.
- fsync triggers writeback
But now the extent is shared and therefore we must fallback into COW
mode, which fails with ENOSPC since there's not enough space to
allocate data extents.
[WORKAROUND]
The workaround is to ensure any buffered write in the related extents
(not just the reflink source range) get flushed before reflink/dedupe,
so that NOCOW writes succeed that happened before reflinking succeed.
The workaround is expensive, we could do it better by only flushing
NOCOW range, but that needs extra accounting for NOCOW range.
For now, fix the possible data loss first.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The first thing code does in check_can_nocow is trying to block
concurrent snapshots. If this fails (due to snpashot already being in
progress) the function returns ENOSPC which makes no sense. Instead
return EAGAIN. Despite this return value not being propagated to callers
it's good practice to return the closest in terms of semantics error
code. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In case no cached_state argument is passed to
btrfs_lock_and_flush_ordered_range use one locally in the function. This
optimises the case when an ordered extent is found since the unlock
function will be able to unlock that state directly without searching
for it again.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There several functions which open code
btrfs_lock_and_flush_ordered_range, just replace them with a call to the
function. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a certain idiom used in multiple places in btrfs' codebase,
dealing with flushing an ordered range. Factor this in a separate
function that can be reused. Future patches will replace the existing
code with that function.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At the context of btrfs_run_delalloc_range(), we haven't started/joined
a transaction, thus even something went wrong, we can't and won't abort
transaction, thus no way to make the fs RO.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just add a safe net for btrfs_space_info member updating.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper lacks the btrfs_ prefix and the parameter is the raw
blockgroup type, so none of the callers has to do the flags -> index
conversion.
Signed-off-by: David Sterba <dsterba@suse.com>
The raid_attr table is now 7 * 56 = 392 bytes long, consisting of just
small numbers so we don't have to use ints. New size is 7 * 32 = 224,
saving 3 cachelines.
Signed-off-by: David Sterba <dsterba@suse.com>
Factor the sequence of ifs to a helper, the 'data stripes' here means
the number of stripes without redundancy and parity.
Signed-off-by: David Sterba <dsterba@suse.com>
Replace open coded list of the profiles by selecting them from the
raid_attr table. The criteria are now more explicit, we need profiles
that have more than 1 copy of the data or can reconstruct the data with
a missing device.
Signed-off-by: David Sterba <dsterba@suse.com>
Iterate over the table and gather all allowed profiles for a given
number of devices, instead of open coding.
Signed-off-by: David Sterba <dsterba@suse.com>
fs_info::mapping_tree is the physical<->logical mapping tree and uses
the same underlying structure as extents, but is embedded to another
structure. There are no other members and this indirection is useless.
No functional change.
Signed-off-by: David Sterba <dsterba@suse.com>
The minimum number of devices for RAID5 is 2, though this is only a bit
expensive RAID1, and for RAID6 it's 3, which is a triple copy that works
only 3 devices.
mkfs.btrfs allows that and mounting such filesystem also works, so the
conversion via balance filters is inconsistent with the others and we
should not prevent it.
Signed-off-by: David Sterba <dsterba@suse.com>
The list of profiles in btrfs_chunk_max_errors lists DUP as a profile
DUP able to tolerate 1 device missing. Though this profile is special
with 2 copies, it still needs the device, unlike the others.
Looking at the history of changes, thre's no clear reason why DUP is
there, functions were refactored and blocks of code merged to one
helper.
d20983b40e Btrfs: fix writing data into the seed filesystem
- factor code to a helper
de11cc12df Btrfs: don't pre-allocate btrfs bio
- unrelated change, DUP still in the list with max errors 1
a236aed14c Btrfs: Deal with failed writes in mirrored configurations
- introduced the max errors, leaves DUP and RAID1 in the same group
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This code was first introduced in 5f39d397df ("Btrfs: Create
extent_buffer interface for large blocksizes") and the function was
named btrfs_unlink_trans. It later got renamed to __btrfs_unlink_inode
and finally commit 16cdcec736 ("btrfs: implement delayed inode items
operation") changed the way inodes are deleted and obviated the need for
those two members.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ replace changelog by Nikolay's version ]
Signed-off-by: David Sterba <dsterba@suse.com>
This is a leftover from 312c89fbca ("btrfs: cleanup btrfs_mount()
using btrfs_mount_root()"), the mode was used for opening devices that's
not done here anymore.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function do_trimming(), block_group->lock should be unlocked first,
as the locks should be released in the reverse order. This does not
cause problems but should follow the best practices.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Under certain conditions, we could have strange file extent item in log
tree like:
item 18 key (69599 108 397312) itemoff 15208 itemsize 53
extent data disk bytenr 0 nr 0
extent data offset 0 nr 18446744073709547520 ram 18446744073709547520
The num_bytes + ram_bytes overflow 64 bit type.
For num_bytes part, we can detect such overflow along with file offset
(key->offset), as file_offset + num_bytes should never go beyond u64.
For ram_bytes part, it's about the decompressed size of the extent, not
directly related to the size.
In theory it is OK to have a large value, and put extra limitation
on RAM bytes may cause unexpected false alerts.
So in tree-checker, we only check if the file offset and num bytes
overflow.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is already done in btrfs_init_dev_replace_tgtdev which is the first
phase of device replace, called before doing scrub. During that time
exclusive lock is held. Additionally btrfs_fs_device::commit_total_bytes
is always set based on the size of the underlying block device which
shouldn't change once set. This makes the 2nd assignment of the variable
in the finishing phase redundant.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Part of device replace involves writing an item to the device root
containing information about pending replace operations. Currently space
for this item is not being explicitly reserved so this works thanks to
presence of global reserve. While not fatal it's not a good practice.
Let's be explicit about space requirement of device replace and reserve
space when starting the transaction.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are only 2 branches which goto leave label with need_unlock set
to true. Essentially need_unlock is used as a substitute for directly
calling up_write. Since the branches needing this are only 2 and their
context is not that big it's more clear to just call up_write where
required. No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_init_dev_replace_tgtdev reads certain values from the source
device (such as commit_total_bytes) which are updated during transaction
commit. Currently this function is called before committing any pending
transaction, leading to possibly reading outdated values.
Fix this by moving the function below the transaction commit, at this
point the EXCL_OP bit it set hence once transaction is complete the
total size of the device cannot be changed (it's usually changed by
resize/remove ops which are blocked).
Fixes: 9e271ae27e ("Btrfs: kernel operation should come after user input has been verified")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This WARN_ON can never trigger because src_device cannot be null.
btrfs_find_device_by_devspec always returns either an error or a valid
pointer to the device. Just remove it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no point in holding btrfs_fs_devices::device_list_mutex
while initialising fields of the not-yet-published device. Instead,
hold the mutex only when the newly initialised device is being
published. I think holding device_list_mutex here is redundant
altogether, because at this point BTRFS_FS_EXCL_OP is set which
prevents device removal/addition/balance/resize to occur.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using sync_blockdev makes it plain obvious what's happening. No
functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_check_shared looks up parents of a given extent and uses ulists
for that. These are allocated and freed repeatedly. Preallocation in the
caller will avoid the overhead and also allow us to use the GFP_KERNEL
as it is happens before the extent locks are taken.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, there's only check for fast crc32c implementation on X86,
based on the CPU flags. This is used to decide if checksumming should be
offloaded to worker threads or can be calculated by the caller.
As there are more architectures that implement a faster version of
crc32c (ARM, SPARC, s390, MIPS, PowerPC), also there are specialized hw
cards.
The detection is based on driver name, all generic C implementations
contain 'generic', while the specialized versions do not. Alternatively
the priority could be used, but this is not currently provided by the
crypto API.
The flag is set per-filesystem at mount time and used for the offloading
decisions.
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using @sign to determine whether we're adding or subtracting.
Even it only has 3 callers, it's still (and in fact already caused
problem in the past) confusing to use.
Refactor add_pinned_bytes() to add_pinned_bytes() and sub_pinned_bytes()
to explicitly show what we're doing.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of a magic flag for xfs_trans_alloc, just ensure all callers
that can't relclaim through the file system use memalloc_nofs_save to
set the per-task nofs flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Compare the block layer status directly instead of converting it to
an errno first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no real problem merging ioends that go beyond i_size into an
ioend that doesn't. We just need to move the append transaction to the
base ioend. Also use the opportunity to use a real error code instead
of the magic 1 to cancel the transactions, and write a comment
explaining the scheme.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The fail argument is long gone, update the comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If we pass pages through an iov_iter we always already have a reference
in the caller. Thus remove the ITER_BVEC_FLAG_NO_REF and don't take
reference to pages by default for bvec backed iov_iters.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bio_release_pages instead of duplicating it.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bio_release_pages instead of duplicating it.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bio_release_pages instead of duplicating it.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use bio_release_pages instead of duplicating it.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Account XArray nodes for the page cache to the appropriate cgroup
(Johannes Weiner)
Fix idr_get_next() when called under the RCU lock (Matthew Wilcox)
Add a test for xa_insert() (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAl0WuKsACgkQDpNsjXcp
gj73zgf9Eb477PuwYZpFBA9ZxI5v/6WyqbaWXKdqEhotARgIUuv1CfVnkt1IJE6P
Z3QCRABZ3pIKHgIErJN53B7AdvdONUO4Xf9VFBqmxeWE7F9L3sROOpXc8IrR26kV
hITQn8mwgacNQ8mLtQmcSFaCVC2E7yVNBhVd5zmcA6jNIAFsOJcP06KLJTe94OXe
AB9TJvswxpzAEX8emHQ/a1SFBNZWJ7b53hBcu8CJn8CuGDxmo1/+qqoRyNY+WrDO
OohFk2u1j6Esfc6j0k+Akt8mEFyfU2oxFfv5MjL0KYEyrHoU84eZljFGgf7rQqGj
fqH9RO8J8eoj4D/3XaLL5QYRLIxRaw==
=AXZy
-----END PGP SIGNATURE-----
Merge tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax
Pull XArray fixes from Matthew Wilcox:
- Account XArray nodes for the page cache to the appropriate cgroup
(Johannes Weiner)
- Fix idr_get_next() when called under the RCU lock (Matthew Wilcox)
- Add a test for xa_insert() (Matthew Wilcox)
* tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax:
XArray tests: Add check_insert
idr: Fix idr_get_next race with idr_remove
mm: fix page cache convergence regression
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL
mm, swap: fix THP swap out
fork,memcg: alloc_thread_stack_node needs to set tsk->stack
MAINTAINERS: add CLANG/LLVM BUILD SUPPORT info
mm/vmalloc.c: avoid bogus -Wmaybe-uninitialized warning
mm/page_idle.c: fix oops because end_pfn is larger than max_pfn
initramfs: fix populate_initrd_image() section mismatch
mm/oom_kill.c: fix uninitialized oc->constraint
mm: hugetlb: soft-offline: dissolve_free_huge_page() return zero on !PageHuge
mm: soft-offline: return -EBUSY if set_hwpoison_free_buddy_page() fails
signal: remove the wrong signal_pending() check in restore_user_sigmask()
fs/binfmt_flat.c: make load_flat_shared_library() work
mm/mempolicy.c: fix an incorrect rebind node in mpol_rebind_nodemask
fs/proc/array.c: allow reporting eip/esp for all coredumping threads
mm/dev_pfn: exclude MEMORY_DEVICE_PRIVATE while computing virtual address
Stable bugfixes:
- SUNRPC: Fix up calculation of client message length # 5.1+
- NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O # 4.8+
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAl0Wf3EACgkQ18tUv7Cl
QOs2ORAA5/CXFa471jUldOsHejxfFoddFBkuqf8qZ1AF3TZdFuITAsq+xydxfO5U
hYzUUlOTKedEi+ISYLFs1tjU/nYRQJv7fFZxVwq6uDZ53Z/doiMLAIR67Eq7EcTY
KBWA9zdldnBzb0S87+hkbmaNPR5pjqxBzLEfMmOQEAAh5pSGf5YSeUNTXLGj4wBd
iXf25o1VSjUmNpSHaA3KsrqTJ4mJ7+i/17Iny1c4xRgZbJtoTm44DpceHCheJpbl
DymRSgjSr0vFjJbufcKkbF2OPp1ZsnkDiKyJmZzgPOa3+TMGzisU5yiASoac6D+j
gs426yEz9rvR/TMZtFS05nfu2clKuS8foLGwZelJ7XjQSXJgObCb4xf97jLIOWNb
J+BWwsTmUIQS+fMUQDA+rlbyepJ+skVZpbjmUy+/Uy52oqtnYK6uTD469NdmxBwr
7z2pnCUjJFTqo6BHeCQgR5XlSt1MGDByamcVAWONS+9zJttRhfUOjq0PIOLSrsBK
5zRzJxtBoYLwP5py3zKAeV9RcvDNSgh5U6P0hhFRtHfqMUmtGeA58nNND2S6Qm3/
vAB7WZL0aVSvc3zpz7qdctitMESQNspCkMooAp/EoIime3YkqKCS+AgED9jKLhJR
/5eqtr6tehh6A4dshzSlDF7cFrKyUd+ulS0IN8vt1V2TYgOQmbY=
=FATk
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull two more NFS client fixes from Anna Schumaker:
"These are both stable fixes.
One to calculate the correct client message length in the case of
partial transmissions. And the other to set the proper TCP timeout for
flexfiles"
* tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O
SUNRPC: Fix up calculation of client message length
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0WLe4THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzizPrB/4tNUS8J9mW9Zd3xLAzZmwjq+WAfCV8
wp3IjBHCgvn9SmTYOJtozjTLJVlmeGNVyrCaWbtzQ2YLKvyBTCUF4kg9EG7FMX9a
ixzlHb2+Wu46LYWiA7jhUnoKNMMl1swm01BOvfmGprSwV70BAEF0i2/D7WHikolX
rgcwGb58vUMmXQ1VGfIO9Pox2a8jaZNj82BZnDniMDxetZ5sRsZXGy43s14zC6Lt
YnwDT70Y7+Pr9SwHMA5bnZ8kCtQpr0qAHmDVhEd965Io1XZ+2/EHF5IwqK0xGg+e
KUQdRyhMWjIGG34SWMt5tbT+9Lzeju4CAka9NPSJ1tRtFnk1AvpILbnB
=TpFR
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.2-rc7' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A small fix for a potential -rc1 regression from Jeff"
* tag 'ceph-for-5.2-rc7' of git://github.com/ceph/ceph-client:
ceph: fix ceph_mdsc_build_path to not stop on first component
-----BEGIN PGP SIGNATURE-----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=WzXj
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190628' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Just two small fixes.
One from Paolo, fixing a silly mistake in BFQ. The other one is from
me, ensuring that we have ->file cleared in the io_uring request a bit
earlier. That avoids a use-before-free, if we encounter an error
before ->file is assigned"
* tag 'for-linus-20190628' of git://git.kernel.dk/linux-block:
block, bfq: fix operator in BFQQ_TOTALLY_SEEKY
io_uring: ensure req->file is cleared on allocation
This is the minimal fix for stable, I'll send cleanups later.
Commit 854a6ed568 ("signal: Add restore_user_sigmask()") introduced
the visible change which breaks user-space: a signal temporary unblocked
by set_user_sigmask() can be delivered even if the caller returns
success or timeout.
Change restore_user_sigmask() to accept the additional "interrupted"
argument which should be used instead of signal_pending() check, and
update the callers.
Eric said:
: For clarity. I don't think this is required by posix, or fundamentally to
: remove the races in select. It is what linux has always done and we have
: applications who care so I agree this fix is needed.
:
: Further in any case where the semantic change that this patch rolls back
: (aka where allowing a signal to be delivered and the select like call to
: complete) would be advantage we can do as well if not better by using
: signalfd.
:
: Michael is there any chance we can get this guarantee of the linux
: implementation of pselect and friends clearly documented. The guarantee
: that if the system call completes successfully we are guaranteed that no
: signal that is unblocked by using sigmask will be delivered?
Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com
Fixes: 854a6ed568 ("signal: Add restore_user_sigmask()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Eric Wong <e@80x24.org>
Tested-by: Eric Wong <e@80x24.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
load_flat_shared_library() is broken: It only calls load_flat_file() if
prepare_binprm() returns zero, but prepare_binprm() returns the number of
bytes read - so this only happens if the file is empty.
Instead, call into load_flat_file() if the number of bytes read is
non-negative. (Even if the number of bytes is zero - in that case,
load_flat_file() will see nullbytes and return a nice -ENOEXEC.)
In addition, remove the code related to bprm creds and stop using
prepare_binprm() - this code is loading a library, not a main executable,
and it only actually uses the members "buf", "file" and "filename" of the
linux_binprm struct. Instead, call kernel_read() directly.
Link: http://lkml.kernel.org/r/20190524201817.16509-1-jannh@google.com
Fixes: 287980e49f ("remove lots of IS_ERR_VALUE abuses")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
0a1eb2d474 ("fs/proc: Stop reporting eip and esp in /proc/PID/stat")
stopped reporting eip/esp and fd7d56270b ("fs/proc: Report eip/esp in
/prod/PID/stat for coredumping") reintroduced the feature to fix a
regression with userspace core dump handlers (such as minicoredumper).
Because PF_DUMPCORE is only set for the primary thread, this didn't fix
the original problem for secondary threads. Allow reporting the eip/esp
for all threads by checking for PF_EXITING as well. This is set for all
the other threads when they are killed. coredump_wait() waits for all the
tasks to become inactive before proceeding to invoke a core dumper.
Link: http://lkml.kernel.org/r/87y32p7i7a.fsf@linutronix.de
Link: http://lkml.kernel.org/r/20190522161614.628-1-jlu@pengutronix.de
Fixes: fd7d56270b ("fs/proc: Report eip/esp in /prod/PID/stat for coredumping")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Jan Luebbe <jlu@pengutronix.de>
Tested-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Properly allocate the space for the bio_vecs instead of just one byte
per bio_vec.
Fixes: 79b54d9bfc ("xfs: use bios directly to write log buffers")
Reported-by: syzbot+b75afdbe271a0d7ac4f6@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.
nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Link every newly allocated writeback bio to cgroup pointed to by the
writeback control structure, and charge every byte written back to it.
Tested-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move setting up operation and write hint to xfs_alloc_ioend, and
then just copy over all needed information from the previous bio
in xfs_chain_bio and stop passing various parameters to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we're writing out a fresh new AG, make sure that we don't list an
internal log as free and that we create the rmap for the region. growfs
never does this, but we will need it when we hook up mkfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Refactor the code that populates the free space btrees of a new AG so
that we can avoid code duplication once things start getting
complicated.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_alloc_ag_vextent_small() doesn't update the output parameters in
the event of an AGFL allocation. Instead, it updates the
xfs_alloc_arg structure directly to complete the allocation.
Update both args and the output params to provide consistent
behavior for future callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The small allocation helper is implemented in a way that is fairly
tightly integrated to the existing allocation algorithms. It expects
a cntbt cursor beyond the end of the tree, attempts to locate the
last record in the tree and only attempts an AGFL allocation if the
cntbt is empty.
The upcoming generic algorithm doesn't rely on the cntbt processing
of this function. It will only call this function when the cntbt
doesn't have a big enough extent or is empty and thus AGFL
allocation is the only remaining option. Tweak
xfs_alloc_ag_vextent_small() to handle a NULL cntbt cursor and skip
the cntbt logic. This facilitates use by the existing allocation
code and new code that only requires an AGFL allocation attempt.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the small allocation helper further up in the file to avoid the
need for a function declaration. The remaining declarations will be
removed by followup patches. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_alloc_ag_vextent_small() is kind of a mess. Clean it up in
preparation for future changes. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep all bmap item related code together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep all rmap item related code together in one file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep all the refcount item related code together in one file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep all the extree item related code together in one file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no good reason to keep these two functions separate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no good reason to keep these two functions separate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no good reason to keep these two functions separate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no good reason to keep these two functions separate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the hand grown linked list handling and cil context attachment
with the standard list_head structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The cast is not type safe, and we can just dereference the first
member instead to start with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have various items that are released from ->iop_comitting. Add a
flag to just call ->iop_release from the commit path to avoid tons
of boilerplate code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The iop_unlock method is called when comitting or cancelling a
transaction. In the latter case, the transaction may or may not be
aborted. While there is no known problem with the current code in
practice, this implementation is limited in that any log item
implementation that might want to differentiate between a commit and a
cancellation must rely on the aborted state. The aborted bit is only
set when the cancelled transaction is dirty, however. This means that
there is no way to distinguish between a commit and a clean transaction
cancellation.
For example, intent log items currently rely on this distinction. The
log item is either transferred to the CIL on commit or released on
transaction cancel. There is currently no possibility for a clean intent
log item in a transaction, but if that state is ever introduced a cancel
of such a transaction will immediately result in memory leaks of the
associated log item(s). This is an interface deficiency and landmine.
To clean this up, replace the iop_unlock method with an iop_release
method that is specific to transaction cancel. The existing
iop_committing method occurs at the same time as iop_unlock in the
commit path and there is no need for two separate callbacks here.
Overload the iop_committing method with the current commit time
iop_unlock implementations to eliminate the need for the latter and
further simplify the interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
While commiting items looks very similar to freeing them on error it is
a different operation, and they will diverge a bit soon.
Split out the commit case from xfs_trans_free_items, inline it into
xfs_log_commit_cil and give it a separate trace point.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This method should never be called, so don't waste code on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just check if they are present first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just pass a straight bool aborted instead of abusing XFS_LI_ABORTED as a
flag in function parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We need to derive the mount pointer from a buffer in a lot of place.
Add a direct pointer to short cut the pointer chasing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This field is now always idential to b_length.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that the log code doesn't abuse this field any more we can
declare it as a struct xfs_buf_log_item pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that the log code uses bios directly we can drop various special
cases in the buffer cache code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we don't use struct xfs_buf to hold log recovery buffer rename
the related functions and variables to just talk of a buffer instead of
using the bp name that we usually use for xfs_buf related functionality.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xfs_buf structure is basically used as a glorified container for
a memory allocation in the log recovery code. Replace it with a
call to kmem_alloc_large and a simple abstraction to read into or
write from it synchronously using chained bios.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This simplifies both the helper and the callers. We lost a bit of
size sanity checking, but that is already covered by KASAN if needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the workqueue used for log I/O completions from struct xfs_mount
to struct xlog to keep it self contained in the log code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: destroy the log workqueue after ensuring log ios are done]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently the XFS logging code uses the xfs_buf structure and
associated APIs to write the log buffers to disk. This requires
various special cases in the log code and is generally not very
optimal.
Instead of using a buffer just allocate a kmem_alloc_larger region for
each log buffer, and use a bio and bio_vec array embedded in the iclog
structure to write the buffer to disk. This also allows for using
the bio split and chaining case to deal with the case of a log
buffer wrapping around the end of the log.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: don't split if/else with an #endif]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the slightly shorter way to get at the buftarg for the log device
wherever we can in the log and log recovery code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
