Commit Graph

19 Commits

Author SHA1 Message Date
Linus Torvalds
04cbfba620 dmaengine updates for v5.4-rc1
- Move Dmaengine DT bindings to YAML and convert Allwinner to schema.
  - FSL dma device_synchronize implementation
  - DW split acpi and of helpers and updates to driver and support for Elkhart
    Lake
  - Move filter fn as private for omap-dma and edma drivers and improvements
    to these drivers
  - Mark expected switch fall-through in couple of drivers
  - Renames of shdma and nbpfaxi binding document
  - Minor updates to bunch of drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdgKdzAAoJEHwUBw8lI4NHpS8P/R9goCZa+8gheQbgJKR7lyH0
 a+6wTUA3z8bAw0Z8QiOtZkeYbSYUQSWYzPIjjOkpZXLLXvzHfDLBZ9LBEQORhPU6
 hVC3RZ4hey/HFC1pyZcua6dniFIXicD/zIUvqeYTnC7gb+q7J2WgJaTub/OuZKL0
 JQ45dDE219nkFWZ37wUJgAEWq2r429JoxkJwFUZeKKldpMy3pKRSCt+FPnDZZBtt
 n6DBSbWbzPZ6DtKGc6Sh75bFm12xHhuCS0uB6k7g3APY6T8NslpGTsFwtp5PB/Q0
 5BLwLAZZjeya6RgPBne0cjZ75YFb+Rf+yLM5AErYPLZTy07/88BtMDWXSjJbDDlh
 BFu93hDqB/0rp28HJF9ZoH5MNp181cyvkQztt83gB97Lkk8wBGAyvqIExe2ZeHw6
 XJibCDjS9A1xjxWi4IBx/YyiSOesrnWvRvFcCXnEcsRM74m2xX9oLC+dwQgx2o9f
 92V5edxojDlKk8J2ZNX8meojIXx955/et6SgUC61S/hhpZAMnJgNfBJ0FtrR2q3Q
 qnpYsy1Ef9399laQGRzPQ2wgs6PRQfoNTZUa1evTQW3fBdoy+yF19tsVhVwhxXt8
 LqKL6Y/fKlL7/wtdBQIeyJLp3CF1EyaePuZcaUnd/BM8ZKLetCT64iM6nJLjoZY9
 xpYkmce5/u+65x0mQJ/B
 =Q8bz
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:

 - Move Dmaengine DT bindings to YAML and convert Allwinner to schema.

 - FSL dma device_synchronize implementation

 - DW split acpi and of helpers and updates to driver and support for
   Elkhart Lake

 - Move filter fn as private for omap-dma and edma drivers and
   improvements to these drivers

 - Mark expected switch fall-through in couple of drivers

 - Renames of shdma and nbpfaxi binding document

 - Minor updates to bunch of drivers

* tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits)
  dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits()
  dmaengine: ti: edma: Only reset region0 access registers
  dmaengine: ti: edma: Do not reset reserved paRAM slots
  dmaengine: iop-adma.c: fix printk format warning
  dmaengine: stm32-dma: Use struct_size() helper
  dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property
  dmanegine: ioat/dca: Use struct_size() helper
  dmaengine: iop-adma: remove set but not used variable 'slots_per_op'
  dmaengine: dmatest: Add support for completion polling
  dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status()
  dmaengine: ti: omap-dma: Remove 'Assignment in if condition'
  dmaengine: ti: edma: Remove 'Assignment in if condition'
  dmaengine: dw: platform: Split OF helpers to separate module
  dmaengine: dw: platform: Split ACPI helpers to separate module
  dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register()
  dmaengine: dw: platform: Switch to acpi_dma_controller_register()
  dmaengine: dw: platform: Use devm_platform_ioremap_resource()
  dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw: platform: Use struct dw_dma_chip_pdata
  dmaengine: dw: Export struct dw_dma_chip_pdata for wider use
  ...
2019-09-17 19:04:40 -07:00
Jonathan Hunter
a9afc9ea93 dmaengine: tegra210-adma: Don't program FIFO threshold
The Tegra210 ADMA supports two modes for transferring data to a FIFO
which are ...

1. Transfer data to/from the FIFO as soon as a single burst can be
   transferred.
2. Transfer data to/from the FIFO based upon FIFO thresholds, where
   the FIFO threshold is specified in terms on multiple bursts.

Currently, the ADMA driver programs the FIFO threshold values in the
FIFO_CTRL register, but never enables the transfer mode that uses
these threshold values. Given that these have never been used so far,
simplify the ADMA driver by removing the programming of these threshold
values.

Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20190731101639.22755-1-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-31 20:47:24 +05:30
YueHaibing
d105ef8120 dmaengine: tegra210-adma: Fix unused function warnings
If CONFIG_PM is not set, build warnings:

drivers/dma/tegra210-adma.c:747:12: warning: tegra_adma_runtime_resume defined but not used [-Wunused-function]
 static int tegra_adma_runtime_resume(struct device *dev)
drivers/dma/tegra210-adma.c:715:12: warning: tegra_adma_runtime_suspend defined but not used [-Wunused-function]
 static int tegra_adma_runtime_suspend(struct device *dev)

Mark the two function as __maybe_unused.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Fixes: 3145d73e69 ("dmaengine: tegra210-adma: remove PM_CLK dependency")
Fixes: f46b195799 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20190709083258.57112-1-yuehaibing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-25 18:29:44 +05:30
Linus Torvalds
66b59f2b5e dmaengine fixes for v5.2-rc4
The fixes for this round are in drivers:
  - jz4780 transfer fix for acking descriptors early
  - fsl-qdma: clean registers on error
  - dw-axi-dmac: null pointer dereference fix
  - mediatek-cqdma: fix sleeping in atomic context
  - tegra210-adma: fix bunch os issues like crashing in driver
    probe, channel FIFO configuration etc.
  - sprd: Fixes for possible crash on descriptor status, block
    length overflow. For 2-stage transfer fix incorrect start,
    configuration and interrupt handling.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJc+3afAAoJEHwUBw8lI4NHYe0P/RVwZso3RKbAALFg6MJLyWun
 UpIJ9NA28xcKyghXa3mbq5gFgqkwJedACaXaik/wZr23+FJodg1afy7cfZRq3l5I
 arOmc7U2HK78L+h6T6JbIRP+pxIHHlrMaVwyO2ZwQ2jJmwwV/KyXgfxmv2ZIc1cg
 0M2C22pgy7oacK47eyjfcF/yH6PWARVaUlUHB+0pXXgwpImNl9IO+ritEzJg6hA2
 boltBfHX86XB/qfbnHaqo7bGUhEY4kqQafHKDNUh+jm7GgoI5biVC7dtH7liI0es
 U3I+RXFbOi4sxaY/j5aRgCNCnc7nUdU806ma3DPuTwybeca0ixttazjtB1p56ewU
 /NkhiuWf/qShZkepGlB50l7CAJ4Q0of2tPFr8pnI9OdZl8MzcoHIhN95IT/aEByf
 f0cbwv8lAeU948zm63axs5eS36M1yoV/cUzzeLatXWY3CS82FlTiEaWGnYkfZJ9j
 DNOr7WGk81A66kNEDIq65H9qQd86kRdNgoy1f7DNxBOjzVTzXGIATM+zpb3W/tsb
 Qb3i8OD9Lo4TzWCiDqbasGYKjAwGougcRKZWvSv/qfuItq/vGnChSNs7cMx73znJ
 EfgG+/kiKEn2hj9E5eSduqOrBaL4g+AJlqb93fpH54Jjr3QaupvhCZ2bYhrb9QrU
 rW3FZfGsAcrlsPbOlIOW
 =Ca0d
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:

 - jz4780 transfer fix for acking descriptors early

 - fsl-qdma: clean registers on error

 - dw-axi-dmac: null pointer dereference fix

 - mediatek-cqdma: fix sleeping in atomic context

 - tegra210-adma: fix bunch os issues like crashing in driver probe,
   channel FIFO configuration etc.

 - sprd: Fixes for possible crash on descriptor status, block length
   overflow. For 2-stage transfer fix incorrect start, configuration and
   interrupt handling.

* tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: sprd: Add interrupt support for 2-stage transfer
  dmaengine: sprd: Fix the right place to configure 2-stage transfer
  dmaengine: sprd: Fix block length overflow
  dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
  dmaengine: sprd: Add validation of current descriptor in irq handler
  dmaengine: sprd: Fix the possible crash when getting descriptor status
  dmaengine: tegra210-adma: Fix spelling
  dmaengine: tegra210-adma: Fix channel FIFO configuration
  dmaengine: tegra210-adma: Fix crash during probe
  dmaengine: mediatek-cqdma: sleeping in atomic context
  dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
  dmaengine: fsl-qdma: Add improvement
  dmaengine: jz4780: Fix transfers being ACKed too soon
2019-06-08 12:46:31 -07:00
Thomas Gleixner
9952f6918d treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 228 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:29:52 -07:00
Jon Hunter
492252493e dmaengine: tegra210-adma: Fix spelling
Correct spelling of 'register' in Tegra210 ADMA driver.

Fixes: ded1f3db4c ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips")

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21 14:26:00 +05:30
Jon Hunter
9ab59bf5dd dmaengine: tegra210-adma: Fix channel FIFO configuration
Commit ded1f3db4c ("dmaengine: tegra210-adma: prepare for supporting
newer Tegra chips") removed the default settings DMA channel RX and TX
FIFO sizes and this is breaking DMA transfers. The intention was to
move the default settings to the chip specific data structure because
this commit was preparing for adding support for Tegra186 where the
fields for the FIFO CTRL register are slightly different.

Fix the configuration of the FIFO sizes by adding default values for
the FIFO CTRL register for both Tegra210 and Tegra186 and store the
values in the chip specific structure.

Fixes: ded1f3db4c ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips")

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21 14:26:00 +05:30
Jon Hunter
b53611fb1c dmaengine: tegra210-adma: Fix crash during probe
Commit f33e7bb3eb ("dmaengine: tegra210-adma: restore channel status")
added support to save and restore the DMA channel registers when runtime
suspending the ADMA. This change is causing the kernel to crash when
probing the ADMA, if the device is probed deferred when looking up the
channel interrupts. The crash occurs because not all of the channel base
addresses have been setup at this point and in the clean-up path of the
probe, pm_runtime_suspend() is called invoking its callback which
expects all the channel base addresses to be initialised.

Although this could be fixed by simply checking for a NULL address, on
further review of the driver it seems more appropriate that we only call
pm_runtime_get_sync() after all the channel interrupts and base
addresses have been configured. Therefore, fix this crash by moving the
calls to pm_runtime_enable(), pm_runtime_get_sync() and
tegra_adma_init() after the DMA channels have been initialised.

Fixes: f33e7bb3eb ("dmaengine: tegra210-adma: restore channel status")

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21 14:26:00 +05:30
Sameer Pujar
f33e7bb3eb dmaengine: tegra210-adma: restore channel status
Status of ADMA channel registers is not saved and restored during system
suspend. During active playback if system enters suspend, this results in
wrong state of channel registers during system resume and playback fails
to resume properly. Fix this by saving following channel registers in
runtime suspend and restore during runtime resume.
 * ADMA_CH_LOWER_SRC_ADDR
 * ADMA_CH_LOWER_TRG_ADDR
 * ADMA_CH_FIFO_CTRL
 * ADMA_CH_CONFIG
 * ADMA_CH_CTRL
 * ADMA_CH_CMD
 * ADMA_CH_TC
Runtime PM calls will be inovked during system resume path if a playback
or capture needs to be resumed. Hence above changes work fine for system
suspend case.

Fixes: f46b195799 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04 16:13:42 +05:30
Sameer Pujar
f030e41950 dmaengine: tegra210-dma: free dma controller in remove()
Following kernel panic is seen during DMA driver unload->load sequence
==========================================================================
Unable to handle kernel paging request at virtual address ffffff8001198880
Internal error: Oops: 86000007 [#1] PREEMPT SMP
CPU: 0 PID: 5907 Comm: HwBinder:4123_1 Tainted: G C 4.9.128-tegra-g065839f
Hardware name: galen (DT)
task: ffffffc3590d1a80 task.stack: ffffffc3d0678000
PC is at 0xffffff8001198880
LR is at of_dma_request_slave_channel+0xd8/0x1f8
pc : [<ffffff8001198880>] lr : [<ffffff8008746f30>] pstate: 60400045
sp : ffffffc3d067b710
x29: ffffffc3d067b710 x28: 000000000000002f
x27: ffffff800949e000 x26: ffffff800949e750
x25: ffffff800949e000 x24: ffffffbefe817d84
x23: ffffff8009f77cb0 x22: 0000000000000028
x21: ffffffc3ffda49c8 x20: 0000000000000029
x19: 0000000000000001 x18: ffffffffffffffff
x17: 0000000000000000 x16: ffffff80082b66a0
x15: ffffff8009e78250 x14: 000000000000000a
x13: 0000000000000038 x12: 0101010101010101
x11: 0000000000000030 x10: 0101010101010101
x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f
x7 : 62ff726b6b64622c x6 : 0000000000008064
x5 : 6400000000000000 x4 : ffffffbefe817c44
x3 : ffffffc3ffda3e08 x2 : ffffff8001198880
x1 : ffffffc3d48323c0 x0 : ffffffc3d067b788

Process HwBinder:4123_1 (pid: 5907, stack limit = 0xffffffc3d0678028)
Call trace:
[<ffffff8001198880>] 0xffffff8001198880
[<ffffff80087459f8>] dma_request_chan+0x50/0x1f0
[<ffffff8008745bc0>] dma_request_slave_channel+0x28/0x40
[<ffffff8001552c44>] tegra_alt_pcm_open+0x114/0x170
[<ffffff8008d65fa4>] soc_pcm_open+0x10c/0x878
[<ffffff8008d18618>] snd_pcm_open_substream+0xc0/0x170
[<ffffff8008d1878c>] snd_pcm_open+0xc4/0x240
[<ffffff8008d189e0>] snd_pcm_playback_open+0x58/0x80
[<ffffff8008cfc6d4>] snd_open+0xb4/0x178
[<ffffff8008250628>] chrdev_open+0xb8/0x1d0
[<ffffff8008246fdc>] do_dentry_open+0x214/0x318
[<ffffff80082485d0>] vfs_open+0x58/0x88
[<ffffff800825bce0>] do_last+0x450/0xde0
[<ffffff800825c718>] path_openat+0xa8/0x368
[<ffffff800825dd84>] do_filp_open+0x8c/0x110
[<ffffff8008248a74>] do_sys_open+0x164/0x220
[<ffffff80082b66dc>] compat_SyS_openat+0x3c/0x50
[<ffffff8008083040>] el0_svc_naked+0x34/0x38
---[ end trace 67e6d544e65b5145 ]---
Kernel panic - not syncing: Fatal exception
==========================================================================

In device probe(), of_dma_controller_register() registers DMA controller.
But when driver is removed, this is not freed. During driver reload this
results in data abort and kernel panic. Add of_dma_controller_free() in
driver remove path to fix the issue.

Fixes: f46b195799 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04 16:13:42 +05:30
Sameer Pujar
94dc8f4ed4 dmaengine: tegra210-adma: add pause/resume support
During an audio playback session it is observed that, audio goes off after
few seconds of continuous pause and play. No audio is heard even when the
playback is resumed.

The reason for above is, currently ADMA driver does not handle DMA_PAUSE/
DMA_RESUME and relevant callbacks for dma_device are not implemented. This
patch implements device_pause and device_resume callbacks for the device.
During pause TRANSFER_PAUSE bit of dma channel control register is set and
the same is cleared during resume.

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04 16:13:42 +05:30
Sameer Pujar
433de642a7 dmaengine: tegra210-adma: add support for Tegra186/Tegra194
Add Tegra186 specific macro defines and chip_data structure for chip
specific information. New compatibility is added to select relevant
chip details. There is no major change for Tegra194 and hence it can
use the same chip data.

The bits in the BURST_SIZE field of the ADMA CH_CONFIG register are
encoded differently on Tegra186 and Tegra194 compared with Tegra210.
On Tegra210 the bits are encoded as follows ...

 1 = WORD_1
 2 = WORDS_2
 3 = WORDS_4
 4 = WORDS_8
 5 = WORDS_16

Where as on Tegra186 and Tegra194 the bits are encoded as ...

 0 = WORD_1
 1 = WORDS_2
 2 = WORDS_3
 3 = WORDS_4
 4 = WORDS_5
 ...
 15 = WORDS_16

Add helper functions for generating the correct burst size.

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04 16:13:41 +05:30
Sameer Pujar
ded1f3db4c dmaengine: tegra210-adma: prepare for supporting newer Tegra chips
This is a preparatory patch to add support for Tegra186 and Tegra194 chips.
Following changes are necessary to make driver code generic.
 * chip_data structure is enhanced to have chip specific details and
   following are the additions to the structure
   * Offset addresses for ADMA global and channel registers
   * Offset values for Tx and Rx channel selection
   * Maximum supported Tx and Rx channels
   * Tx and Rx channel request mask
   * ADMA channel register space size
 * Make use of above chip_data to generalise the driver code

Support for Tegra186 and Tegra194 will be added in subsequent patches of
the series.

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04 16:13:41 +05:30
Sameer Pujar
74fca241e6 dmaengine: tegra210-adma: update system sleep callbacks
If the driver is active till late suspend, where runtime PM cannot run,
force suspend is essential in such case to put the device in low power
state. Thus pm_runtime_force_suspend and pm_runtime_force_resume are
used as system sleep callbacks during system wide PM transitions.
Late system sleep callbacks are used to ensure, for instance, that the
sound core has suspended any on-going activity, including stopping the
ADMA if active, before we attempt to suspend the ADMA.

Suggested-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-03-25 10:23:55 +05:30
Sameer Pujar
f6ed6491d5 dmaengine: tegra210-adma: use devm_clk_*() helpers
adma driver is using pm_clk_*() interface for managing clock resources.
With this it is observed that clocks remain ON always. This happens on
Tegra devices which use BPMP co-processor to manage clock resources,
where clocks are enabled during prepare phase. This is necessary because
clocks to BPMP are always blocking. When pm_clk_*() interface is used on
such Tegra devices, clock prepare count is not balanced till remove call
happens for the driver and hence clocks are seen ON always. Thus this
patch replaces pm_clk_*() with devm_clk_*() framework.

Suggested-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-03-25 10:23:42 +05:30
Gustavo A. R. Silva
863326a6ee dmaengine: tegra210-adma: Use struct_size() in devm_kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-20 10:48:23 +05:30
Sergei Shtylyov
7f5770678b dmaengine: tegra210-adma: fix of_irq_get() error check
of_irq_get() may return 0 as well as negative error number on failure,
while the driver only checks for the negative values. The driver would then
call request_irq(0, ...) in tegra_adma_alloc_chan_resources() and never get
valid channel interrupt.

Check for 'tdc->irq <= 0' instead and return -ENXIO from the driver's probe
iff of_irq_get() returned 0.

Fixes: f46b195799 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-09 11:39:16 +05:30
Jon Hunter
24fec75017 dmaengine: tegra210-adma: Update driver to use of_pm_clk_add_clk
Commit 498b5fdd40 ("PM / clk: Add support for adding a specific clock
from device-tree") add a new helper function for adding a clock from
device-tree to a device. Update the ADMA driver to use this new function
to simplify the driver.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-22 11:55:05 +05:30
Jon Hunter
f46b195799 dmaengine: tegra-adma: Add support for Tegra210 ADMA
Add support for the Tegra210 Audio DMA controller that is used for
transferring data between system memory and the Audio sub-system.
The driver only supports cyclic transfers because this is being solely
used for audio.

This driver is based upon the work by Dara Ramesh <dramesh@nvidia.com>.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-13 14:56:24 +05:30