Commit Graph

873186 Commits

Author SHA1 Message Date
Jon Bloomfield
4f7af1948a drm/i915: Support ro ppgtt mapped cmdparser shadow buffers
For Gen7, the original cmdparser motive was to permit limited
use of register read/write instructions in unprivileged BB's.
This worked by copying the user supplied bb to a kmd owned
bb, and running it in secure mode, from the ggtt, only if
the scanner finds no unsafe commands or registers.

For Gen8+ we can't use this same technique because running bb's
from the ggtt also disables access to ppgtt space. But we also
do not actually require 'secure' execution since we are only
trying to reduce the available command/register set. Instead we
will copy the user buffer to a kmd owned read-only bb in ppgtt,
and run in the usual non-secure mode.

Note that ro pages are only supported by ppgtt (not ggtt), but
luckily that's exactly what we need.

Add the required paths to map the shadow buffer to ppgtt ro for Gen8+

v2: IS_GEN7/IS_GEN (Mika)
v3: rebase
v4: rebase
v5: rebase

Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05 11:37:54 -08:00
Jon Bloomfield
311a50e76a drm/i915: Add support for mandatory cmdparsing
The existing cmdparser for gen7 can be bypassed by specifying
batch_len=0 in the execbuf call. This is safe because bypassing
simply reduces the cmd-set available.

In a later patch we will introduce cmdparsing for gen9, as a
security measure, which must be strictly enforced since without
it we are vulnerable to DoS attacks.

Introduce the concept of 'required' cmd parsing that cannot be
bypassed by submitting zero-length bb's.

v2: rebase (Mika)
v2: rebase (Mika)
v3: fix conflict on engine flags (Mika)

Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05 11:37:54 -08:00
Jon Bloomfield
66d8aba1cd drm/i915: Remove Master tables from cmdparser
The previous patch has killed support for secure batches
on gen6+, and hence the cmdparsers master tables are
now dead code. Remove them.

Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05 11:34:08 -08:00
Jon Bloomfield
44157641d4 drm/i915: Disable Secure Batches for gen6+
Retroactively stop reporting support for secure batches
through the api for gen6+ so that older binaries trigger
the fallback path instead.

Older binaries use secure batches pre gen6 to access resources
that are not available to normal usermode processes. However,
all known userspace explicitly checks for HAS_SECURE_BATCHES
before relying on the secure batch feature.

Since there are no known binaries relying on this for newer gens
we can kill secure batches from gen6, via I915_PARAM_HAS_SECURE_BATCHES.

v2: rebase (Mika)
v3: rebase (Mika)

Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05 11:34:08 -08:00
Jon Bloomfield
0a2f661b6c drm/i915: Rename gen7 cmdparser tables
We're about to introduce some new tables for later gens, and the
current naming for the gen7 tables will no longer make sense.

v2: rebase

Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05 11:34:08 -08:00
Kai Vehmanen
9a11ba7388 ALSA: hda: hdmi - add Tigerlake support
Add Tigerlake HDMI codec support.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205379
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=112171
Cc: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191105161053.22958-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-05 20:16:31 +01:00
Yong Zhi
e44f3d49f9
ASoC: max98373: replace gpio_request with devm_gpio_request
Use devm_gpio_request() to automatic unroll when fails and avoid
resource leaks at error paths.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/1572905399-22402-1-git-send-email-yong.zhi@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-05 18:52:41 +00:00
Olivier Moysan
eaf072e512
ASoC: stm32: sai: add restriction on mmap support
Do not support mmap in S/PDIF mode. In S/PDIF mode
the buffer has to be copied, to allow the channel status
bits insertion.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191104133654.28750-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-05 18:52:21 +00:00
Linus Torvalds
26bc672134 for-linus-2019-11-05
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXcGMxwAKCRCRxhvAZXjc
 otEzAP9lHvP97TtRG9gP6dj6YovZ5Djdo3IscmkTqy5Nt8sVNQD+NWg1LZnSMFdJ
 ExETgRVlsjF8q2sblswtn/8Ab53O6AM=
 =RVGl
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull clone3 stack argument update from Christian Brauner:
 "This changes clone3() to do basic stack validation and to set up the
  stack depending on whether or not it is growing up or down.

  With clone3() the expectation is now very simply that the .stack
  argument points to the lowest address of the stack and that
  .stack_size specifies the initial stack size. This is diferent from
  legacy clone() where the "stack" argument had to point to the lowest
  or highest address of the stack depending on the architecture.

  clone3() was released with 5.3. Currently, it is not documented and
  very unclear to userspace how the stack and stack_size argument have
  to be passed. After talking to glibc folks we concluded that changing
  clone3() to determine stack direction and doing basic validation is
  the right course of action.

  Note, this is a potentially user visible change. In the very unlikely
  case, that it breaks someone's use-case we will revert. (And then e.g.
  place the new behavior under an appropriate flag.)

  Note that passing an empty stack will continue working just as before.
  Breaking someone's use-case is very unlikely. Neither glibc nor musl
  currently expose a wrapper for clone3(). There is currently also no
  real motivation for anyone to use clone3() directly. First, because
  using clone{3}() with stacks requires some assembly (see glibc and
  musl). Second, because it does not provide features that legacy
  clone() doesn't. New features for clone3() will first happen in v5.5
  which is why v5.4 is still a good time to try and make that change now
  and backport it to v5.3.

  I did a codesearch on https://codesearch.debian.net, github, and
  gitlab and could not find any software currently relying directly on
  clone3(). I expect this to change once we land CLONE_CLEAR_SIGHAND
  which was a request coming from glibc at which point they'll likely
  start using it"

* tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  clone3: validate stack arguments
2019-11-05 09:44:02 -08:00
Linus Torvalds
7111fa1151 GPIO fixes for the v5.4 series:
- Fix a build error in the tools used for kselftest.
 - A series of reverts to bring the Intel Merrifield back to
   working. We will likely unrevert the reverts for v5.5
   but we can't have v5.4 broken.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl3BjZ8ACgkQQRCzN7AZ
 XXPbTRAAxCBCegC7ZISN413NqmzAc8S9e2pHik/0+UinIiq8Kha1zHEmiWKa/GFv
 NSulFytfwYwi3UVgAMds2lFMpbq6atG60D/FgGhRDeG56RHOs29sYDXOIrWvrad6
 49B2U//2FQPcfMpH5PFT0O+B90cxZRYW/MhljnAuBRPUEF6F9m/BJqHlQYD6eY6v
 Xn005z1N/sQbs/1EBXryNlvfHOtepKXTNC0d+HQnRRTEZsAhid8sc+iTVEvLUZh8
 IttKs2I7rB26swx/HwWyiuWxE3hf5lrlwf3xxMQn2cWyyp08vJNRyiEXsEErHQf6
 9eqt1j4iXARf1fh4KoLCgC6zQgqsLG0BZ9Bf28gVXIRXJZDYV1FOpBfc8YwTk29T
 VhNrafUN0o+72qieXqLLKpMT4gjMnqzBhI06NRXEqA2AwIqQJQd4DHdLNHmiaICJ
 cyfzI4TBTjc3qh2av+D43bESh2UwXYErImvaIT+TqFv1P2T7x2UCFL6WGuQZ/qaB
 z7Gg0vh1gc+yrQnVxOh3vuUpD0x2FXo52k74fSYy55aMQlrj77y3w27hzSZ9Prgs
 zIZtVZbTXXQ+SxtuujzdzZKDJ9gJ0+FWyVCe7MxbgP6vBi+7omZ6TPLn0iAS9GQG
 aqLVGVgaIS0kOVvQVR6aAEonbsZZILns8ib4bpPlGIMNgQTCN2A=
 =ml6d
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "More GPIO fixes! We found a late regression in the Intel Merrifield
  driver. Oh well. We fixed it up.

   - Fix a build error in the tools used for kselftest

   - A series of reverts to bring the Intel Merrifield back to working.

  We will likely unrevert the reverts for v5.5 but we can't have v5.4
  broken"

* tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  Revert "gpio: merrifield: Pass irqchip when adding gpiochip"
  Revert "gpio: merrifield: Restore use of irq_base"
  Revert "gpio: merrifield: Move hardware initialization to callback"
  tools: gpio: Use !building_out_of_srctree to determine srctree
2019-11-05 09:23:08 -08:00
Matti Vaittinen
81363f248a watchdog: bd70528: Add MODULE_ALIAS to allow module auto loading
The bd70528 watchdog driver is probed by MFD driver. Add MODULE_ALIAS
in order to allow udev to load the module when MFD sub-device cell for
watchdog is added.

Fixes: bbc88a0ec9 ("watchdog: bd70528: Initial support for ROHM BD70528 watchdog block")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05 16:58:12 +01:00
Anson Huang
2c50a6b825 watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format
SCU firmware calculates pretimeout based on current time stamp
instead of watchdog timeout stamp, need to convert the pretimeout
to SCU firmware's timeout value.

Fixes: 15f7d7fc55 ("watchdog: imx_sc: Add pretimeout support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05 16:58:12 +01:00
Xingyu Chen
2c77734642 watchdog: meson: Fix the wrong value of left time
The left time value is wrong when we get it by sysfs. The left time value
should be equal to preset timeout value minus elapsed time value. According
to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value
is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved
to BIT[16-31] of the WATCHDOG_TCNT.

[0]: http://linux-meson.com

Fixes: 683fa50f0e ("watchdog: Add Meson GXBB Watchdog Driver")
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05 16:58:12 +01:00
Jorge Ramirez-Ortiz
1993f1d7ca watchdog: pm8916_wdt: fix pretimeout registration flow
When an IRQ is present in the dts, the probe function shall fail if
the interrupt can not be registered.

The probe function shall also be retried if getting the irq is being
deferred.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05 16:58:11 +01:00
Arnd Bergmann
c58e81341a watchdog: cpwd: fix build regression
The compat_ptr_ioctl() infrastructure did not make it into
linux-5.4, so cpwd now fails to build.

Fix it by using an open-coded version.

Fixes: 68f28b01fb ("watchdog: cpwd: use generic compat_ptr_ioctl")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05 16:58:11 +01:00
Anton Eidelman
763303a83a nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme_mpath_clear_ctrl_paths() iterates through
the ctrl->namespaces list while holding ctrl->scan_lock.
This does not seem to be the correct way of protecting
from concurrent list modification.

Specifically, nvme_scan_work() sorts ctrl->namespaces
AFTER unlocking scan_lock.

This may result in the following (rare) crash in ctrl disconnect
during scan_work:

    BUG: kernel NULL pointer dereference, address: 0000000000000050
    Oops: 0000 [#1] SMP PTI
    CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic
    RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core]
    ...
    Call Trace:
     nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core]
     nvme_remove_namespaces+0x35/0xe0 [nvme_core]
     nvme_do_delete_ctrl+0x47/0x90 [nvme_core]
     nvme_sysfs_delete+0x49/0x60 [nvme_core]
     dev_attr_store+0x17/0x30
     sysfs_kf_write+0x3e/0x50
     kernfs_fop_write+0x11e/0x1a0
     __vfs_write+0x1b/0x40
     vfs_write+0xb9/0x1a0
     ksys_write+0x67/0xe0
     __x64_sys_write+0x1a/0x20
     do_syscall_64+0x5a/0x130
     entry_SYSCALL_64_after_hwframe+0x44/0xa9
    RIP: 0033:0x7f8d02bfb154

Fix:
After taking scan_lock in nvme_mpath_clear_ctrl_paths()
down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe.
This will not cause deadlocks because taking scan_lock never happens
while holding the namespaces_rwsem.
Moreover, scan work downs namespaces_rwsem in the same order.

Alternative: sort ctrl->namespaces in nvme_scan_work()
while still holding the scan_lock.
This would leave nvme_mpath_clear_ctrl_paths() without correct protection
against ctrl->namespaces modification by anyone other than scan_work.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-06 00:30:37 +09:00
Max Gurtovoy
9ad9e8d6ca nvme-rdma: fix a segmentation fault during module unload
In case there are controllers that are not associated with any RDMA
device (e.g. during unsuccessful reconnection) and the user will unload
the module, these controllers will not be freed and will access already
freed memory. The same logic appears in other fabric drivers as well.

Fixes: 87fd125344 ("nvme-rdma: remove redundant reference between ib_device and tagset")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-06 00:29:23 +09:00
Christian Brauner
fa729c4df5
clone3: validate stack arguments
Validate the stack arguments and setup the stack depening on whether or not
it is growing down or up.

Legacy clone() required userspace to know in which direction the stack is
growing and pass down the stack pointer appropriately. To make things more
confusing microblaze uses a variant of the clone() syscall selected by
CONFIG_CLONE_BACKWARDS3 that takes an additional stack_size argument.
IA64 has a separate clone2() syscall which also takes an additional
stack_size argument. Finally, parisc has a stack that is growing upwards.
Userspace therefore has a lot nasty code like the following:

 #define __STACK_SIZE (8 * 1024 * 1024)
 pid_t sys_clone(int (*fn)(void *), void *arg, int flags, int *pidfd)
 {
         pid_t ret;
         void *stack;

         stack = malloc(__STACK_SIZE);
         if (!stack)
                 return -ENOMEM;

 #ifdef __ia64__
         ret = __clone2(fn, stack, __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
 #elif defined(__parisc__) /* stack grows up */
         ret = clone(fn, stack, flags | SIGCHLD, arg, pidfd);
 #else
         ret = clone(fn, stack + __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
 #endif
         return ret;
 }

or even crazier variants such as [3].

With clone3() we have the ability to validate the stack. We can check that
when stack_size is passed, the stack pointer is valid and the other way
around. We can also check that the memory area userspace gave us is fine to
use via access_ok(). Furthermore, we probably should not require
userspace to know in which direction the stack is growing. It is easy
for us to do this in the kernel and I couldn't find the original
reasoning behind exposing this detail to userspace.

/* Intentional user visible API change */
clone3() was released with 5.3. Currently, it is not documented and very
unclear to userspace how the stack and stack_size argument have to be
passed. After talking to glibc folks we concluded that trying to change
clone3() to setup the stack instead of requiring userspace to do this is
the right course of action.
Note, that this is an explicit change in user visible behavior we introduce
with this patch. If it breaks someone's use-case we will revert! (And then
e.g. place the new behavior under an appropriate flag.)
Breaking someone's use-case is very unlikely though. First, neither glibc
nor musl currently expose a wrapper for clone3(). Second, there is no real
motivation for anyone to use clone3() directly since it does not provide
features that legacy clone doesn't. New features for clone3() will first
happen in v5.5 which is why v5.4 is still a good time to try and make that
change now and backport it to v5.3. Searches on [4] did not reveal any
packages calling clone3().

[1]: https://lore.kernel.org/r/CAG48ez3q=BeNcuVTKBN79kJui4vC6nw0Bfq6xc-i0neheT17TA@mail.gmail.com
[2]: https://lore.kernel.org/r/20191028172143.4vnnjpdljfnexaq5@wittgenstein
[3]: 5238e95759/src/basic/raw-clone.h (L31)
[4]: https://codesearch.debian.net
Fixes: 7f192e3cd3 ("fork: add clone3")
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-api@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # 5.3
Cc: GNU C Library <libc-alpha@sourceware.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20191031113608.20713-1-christian.brauner@ubuntu.com
2019-11-05 15:50:14 +01:00
Luis Henriques
a3a0819388 ceph: don't allow copy_file_range when stripe_count != 1
copy_file_range tries to use the OSD 'copy-from' operation, which simply
performs a full object copy.  Unfortunately, the implementation of this
system call assumes that stripe_count is always set to 1 and doesn't take
into account that the data may be striped across an object set.  If the
file layout has stripe_count different from 1, then the destination file
data will be corrupted.

For example:

Consider a 8 MiB file with 4 MiB object size, stripe_count of 2 and
stripe_size of 2 MiB; the first half of the file will be filled with 'A's
and the second half will be filled with 'B's:

               0      4M     8M       Obj1     Obj2
               +------+------+       +----+   +----+
        file:  | AAAA | BBBB |       | AA |   | AA |
               +------+------+       |----|   |----|
                                     | BB |   | BB |
                                     +----+   +----+

If we copy_file_range this file into a new file (which needs to have the
same file layout!), then it will start by copying the object starting at
file offset 0 (Obj1).  And then it will copy the object starting at file
offset 4M -- which is Obj1 again.

Unfortunately, the solution for this is to not allow remote object copies
to be performed when the file layout stripe_count is not 1 and simply
fallback to the default (VFS) copy_file_range implementation.

Cc: stable@vger.kernel.org
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-05 15:42:58 +01:00
Jeff Layton
5bb5e6ee6f ceph: don't try to handle hashed dentries in non-O_CREAT atomic_open
If ceph_atomic_open is handed a !d_in_lookup dentry, then that means
that it already passed d_revalidate so we *know* that it's negative (or
at least was very recently). Just return -ENOENT in that case.

This also addresses a subtle bug in dentry handling. Non-O_CREAT opens
call atomic_open with the parent's i_rwsem shared, but calling
d_splice_alias on a hashed dentry requires the exclusive lock.

If ceph_atomic_open receives a hashed, negative dentry on a non-O_CREAT
open, and another client were to race in and create the file before we
issue our OPEN, ceph_fill_trace could end up calling d_splice_alias on
the dentry with the new inode with insufficient locks.

Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-05 15:42:44 +01:00
Takashi Iwai
15c2b3cc09 ALSA: hda/ca0132 - Fix possible workqueue stall
The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync().  It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.

Fix it by dropping the _sync but does call cancel_delayed_work()
instead.

Fixes: 993884f6a2 ("ALSA: hda/ca0132 - Delay HP amp turnon.")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-05 14:44:12 +01:00
Jessica Yu
57baec7b1b scripts/nsdeps: make sure to pass all module source files to spatch
The nsdeps script passes a list of the module source files to
generate_deps_for_ns() as a space delimited string named $mod_source_files,
which then passes it to spatch. But since $mod_source_files is not encased
in quotes, each source file in that string is treated as a separate shell
function argument (as $2, $3, $4, etc.).  However, the spatch invocation
only refers to $2, so only the first file out of $mod_source_files is
processed by spatch.

This causes problems (namely, the MODULE_IMPORT_NS() statement doesn't
get inserted) when a module is composed of many source files and the
"main" module file containing the MODULE_LICENSE() statement is not the
first file listed in $mod_source_files. Fix this by encasing
$mod_source_files in quotes so that the entirety of the string is
treated as a single argument and can be referred to as $2.

In addition, put quotes in the variable assignment of mod_source_files
to prevent any shell interpretation and field splitting.

Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-11-05 14:08:29 +01:00
Jiri Olsa
722ddfde36 perf tools: Fix time sorting
The final sort might get confused when the comparison is done over
bigger numbers than int like for -s time.

Check the following report for longer workloads:

  $ perf report -s time -F time,overhead --stdio

Fix hist_entry__sort() to properly return int64_t and not possible cut
int.

Fixes: 043ca389a3 ("perf tools: Use hpp formats to sort final output")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org # v3.16+
Link: http://lore.kernel.org/lkml/20191104232711.16055-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-05 08:49:14 -03:00
Yegor Yefremov
3926a3a025 can: don't use deprecated license identifiers
The "GPL-2.0" license identifier changed to "GPL-2.0-only" in SPDX v3.0.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-05 12:44:34 +01:00
Timo Schlüßler
27a0e54bae can: mcp251x: mcp251x_restart_work_handler(): Fix potential force_quit race condition
In mcp251x_restart_work_handler() the variable to stop the interrupt
handler (priv->force_quit) is reset after the chip is restarted and thus
a interrupt might occur.

This patch fixes the potential race condition by resetting force_quit
before enabling interrupts.

Signed-off-by: Timo Schlüßler <schluessler@krause.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-05 12:44:22 +01:00
Steven Rostedt (VMware)
6047e1a81e perf tools: Remove unused trace_find_next_event()
trace_find_next_event() was buggy and pretty much a useless helper. As
there are no more users, just remove it.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191017210636.224045576@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-05 08:39:27 -03:00
Steven Rostedt (VMware)
443b0636ea perf scripting engines: Iterate on tep event arrays directly
Instead of calling a useless (and broken) helper function to get the
next event of a tep event array, just get the array directly and iterate
over it.

Note, the broken part was from trace_find_next_event() which after this
will no longer be used, and can be removed.

Committer notes:

This fixes a segfault when generating python scripts from perf.data
files with multiple tracepoint events, i.e. the following use case is
fixed by this patch:

  # perf record -e sched:* sleep 1
  [ perf record: Woken up 31 times to write data ]
  [ perf record: Captured and wrote 0.031 MB perf.data (9 samples) ]
  # perf script -g python
  Segmentation fault (core dumped)
  #

Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20191017153733.630cd5eb@gandalf.local.home
Link: http://lore.kernel.org/lkml/20191017210636.061448713@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-05 08:39:26 -03:00
Michael Zhivich
63ec58b44f x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_early
The introduction of clocksource_tsc_early broke the functionality of
"tsc=reliable" and "tsc=nowatchdog" command line parameters, since
clocksource_tsc_early is unconditionally registered with
CLOCK_SOURCE_MUST_VERIFY and thus put on the watchdog list.

This can cause the TSC to be declared unstable during boot:

  clocksource: timekeeping watchdog on CPU0: Marking clocksource
               'tsc-early' as unstable because the skew is too large:
  clocksource: 'refined-jiffies' wd_now: fffb7018 wd_last: fffb6e9d
               mask: ffffffff
  clocksource: 'tsc-early' cs_now: 68a6a7070f6a0 cs_last: 68a69ab6f74d6
               mask: ffffffffffffffff
  tsc: Marking TSC unstable due to clocksource watchdog

The corresponding elapsed times are cs_nsec=1224152026 and wd_nsec=378942392, so
the watchdog differs from TSC by 0.84 seconds.

This happens when HPET is not available and jiffies are used as the TSC
watchdog instead and the jiffies update is not happening due to lost timer
interrupts in periodic mode, which can happen e.g. with expensive debug
mechanisms enabled or under massive overload conditions in virtualized
environments.

Before the introduction of the early TSC clocksource the command line
parameters "tsc=reliable" and "tsc=nowatchdog" could be used to work around
this issue.

Restore the behaviour by disabling the watchdog if requested on the kernel
command line.

[ tglx: Clarify changelog ]

Fixes: aa83c45762 ("x86/tsc: Introduce early tsc clocksource")
Signed-off-by: Michael Zhivich <mzhivich@akamai.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191024175945.14338-1-mzhivich@akamai.com
2019-11-05 01:24:56 +01:00
Andrew Duggan
310ca2a61c Input: synaptics-rmi4 - remove unused result_bits mask
The result_bits mask is no longer used by the driver and should be
removed.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Link: https://lore.kernel.org/r/20191025002527.3189-4-aduggan@synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-04 16:11:51 -08:00
Andrew Duggan
5d40d95e7e Input: synaptics-rmi4 - do not consume more data than we have (F11, F12)
Currently, rmi_f11_attention() and rmi_f12_attention() functions update
the attn_data data pointer and size based on the size of the expected
size of the attention data. However, if the actual valid data in the
attn buffer is less then the expected value then the updated data
pointer will point to memory beyond the end of the attn buffer. Using
the calculated valid_bytes instead will prevent this from happening.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191025002527.3189-3-aduggan@synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-04 16:11:50 -08:00
Andrew Duggan
f6aabe1ff1 Input: synaptics-rmi4 - disable the relative position IRQ in the F12 driver
This patch fixes an issue seen on HID touchpads which report finger
positions using RMI4 Function 12. The issue manifests itself as
spurious button presses as described in:
https://www.spinics.net/lists/linux-input/msg58618.html

Commit 24d28e4f12 ("Input: synaptics-rmi4 - convert irq distribution
to irq_domain") switched the RMI4 driver to using an irq_domain to handle
RMI4 function interrupts. Functions with more then one interrupt now have
each interrupt mapped to their own IRQ and IRQ handler. The result of
this change is that the F12 IRQ handler was now getting called twice. Once
for the absolute data interrupt and once for the relative data interrupt.
For HID devices, calling rmi_f12_attention() a second time causes the
attn_data data pointer and size to be set incorrectly. When the touchpad
button is pressed, F30 will generate an interrupt and attempt to read the
F30 data from the invalid attn_data data pointer and report incorrect
button events.

This patch disables the F12 relative interrupt which prevents
rmi_f12_attention() from being called twice.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reported-by: Simon Wood <simon@mungewell.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191025002527.3189-2-aduggan@synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-04 16:11:48 -08:00
Lucas Stach
003f01c780 Input: synaptics-rmi4 - fix video buffer size
The video buffer used by the queue is a vb2_v4l2_buffer, not a plain
vb2_buffer. Using the wrong type causes the allocation of the buffer
storage to be too small, causing a out of bounds write when
__init_vb2_v4l2_buffer initializes the buffer.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Fixes: 3a762dbd53 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191104114454.10500-1-l.stach@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-04 16:11:47 -08:00
Thomas Gleixner
e361362b08 x86/dumpstack/64: Don't evaluate exception stacks before setup
Cyrill reported the following crash:

  BUG: unable to handle page fault for address: 0000000000001ff0
  #PF: supervisor read access in kernel mode
  RIP: 0010:get_stack_info+0xb3/0x148

It turns out that if the stack tracer is invoked before the exception stack
mappings are initialized in_exception_stack() can erroneously classify an
invalid address as an address inside of an exception stack:

    begin = this_cpu_read(cea_exception_stacks);  <- 0
    end = begin + sizeof(exception stacks);

i.e. any address between 0 and end will be considered as exception stack
address and the subsequent code will then try to derefence the resulting
stack frame at a non mapped address.

 end = begin + (unsigned long)ep->size;
     ==> end = 0x2000

 regs = (struct pt_regs *)end - 1;
     ==> regs = 0x2000 - sizeof(struct pt_regs *) = 0x1ff0

 info->next_sp   = (unsigned long *)regs->sp;
     ==> Crashes due to accessing 0x1ff0

Prevent this by checking the validity of the cea_exception_stack base
address and bailing out if it is zero.

Fixes: afcd21dad8 ("x86/dumpstack/64: Use cpu_entry_area instead of orig_ist")
Reported-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1910231950590.1852@nanos.tec.linutronix.de
2019-11-05 00:51:35 +01:00
Yi Wang
0ed9ca2589 irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
A recent commit changed a parameter of __irq_domain_alloc_fwnode(), but
did not update the documentation comment. Fix it up.

Fixes: b977fcf477 ("irqdomain/debugfs: Use PAs to generate fwnode names")
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1571476047-29463-1-git-send-email-wang.yi59@zte.com.cn
2019-11-05 00:48:26 +01:00
Jan Beulich
fe6f85ca12 x86/apic/32: Avoid bogus LDR warnings
The removal of the LDR initialization in the bigsmp_32 APIC code unearthed
a problem in setup_local_APIC().

The code checks unconditionally for a mismatch of the logical APIC id by
comparing the early APIC id which was initialized in get_smp_config() with
the actual LDR value in the APIC.

Due to the removal of the bogus LDR initialization the check now can
trigger on bigsmp_32 APIC systems emitting a warning for every booting
CPU. This is of course a false positive because the APIC is not using
logical destination mode.

Restrict the check and the possibly resulting fixup to systems which are
actually using the APIC in logical destination mode.

[ tglx: Massaged changelog and added Cc stable ]

Fixes: bae3a8d330 ("x86/apic: Do not initialize LDR and DFR for bigsmp")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/666d8f91-b5a8-1afd-7add-821e72a35f03@suse.com
2019-11-05 00:11:00 +01:00
Huacai Chen
52338415cf timekeeping/vsyscall: Update VDSO data unconditionally
The update of the VDSO data is depending on __arch_use_vsyscall() returning
True. This is a leftover from the attempt to map the features of various
architectures 1:1 into generic code.

The usage of __arch_use_vsyscall() in the actual vsyscall implementations
got dropped and replaced by the requirement for the architecture code to
return U64_MAX if the global clocksource is not usable in the VDSO.

But the __arch_use_vsyscall() check in the update code stayed which causes
the VDSO data to be stale or invalid when an architecture actually
implements that function and returns False when the current clocksource is
not usable in the VDSO.

As a consequence the VDSO implementations of clock_getres(), time(),
clock_gettime(CLOCK_.*_COARSE) operate on invalid data and return bogus
information.

Remove the __arch_use_vsyscall() check from the VDSO update function and
update the VDSO data unconditionally.

[ tglx: Massaged changelog and removed the now useless implementations in
  	asm-generic/ARM64/MIPS ]

Fixes: 44f57d788e ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1571887709-11447-1-git-send-email-chenhc@lemote.com
2019-11-04 23:02:53 +01:00
José Roberto de Souza
ee2c5ef8a9 drm/i915/dp: Do not switch aux to TBT mode for non-TC ports
Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was
switching aux to TBT mode for all combo-phy ports, happily this did
not caused any issue but is better follow BSpec.
Also this is reserved bit before ICL.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: e9b7e1422d ("drm/i915: Sanitize the terminology used for TypeC port modes")
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029011014.286885-1-jose.souza@intel.com
(cherry picked from commit 4974826482)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-04 13:24:14 -08:00
Imre Deak
1f1be49fb6 drm/i915: Avoid HPD poll detect triggering a new detect cycle
For the HPD interrupt functionality the HW depends on power wells in the
display core domain to be on. Accordingly when enabling these power
wells the HPD polling logic will force an HPD detection cycle to account
for hotplug events that may have happened when such a power well was
off.

Thus a detect cycle started by polling could start a new detect cycle if
a power well in the display core domain gets enabled during detect and
stays enabled after detect completes. That in turn can lead to a
detection cycle runaway.

To prevent re-triggering a poll-detect cycle make sure we drop all power
references we acquired during detect synchronously by the end of detect.
This will let the poll-detect logic continue with polling (matching the
off state of the corresponding power wells) instead of scheduling a new
detection cycle.

Fixes: 6cfe7ec02e ("drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112125
Reported-and-tested-by: Val Kulkov <val.kulkov@gmail.com>
Reported-and-tested-by: wangqr <wqr.prg@gmail.com>
Cc: Val Kulkov <val.kulkov@gmail.com>
Cc: wangqr <wqr.prg@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028181517.22602-1-imre.deak@intel.com
(cherry picked from commit a8ddac7c9f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-04 13:24:11 -08:00
Oleksij Rempel
688d11c384 can: j1939: transport: j1939_xtp_rx_eoma_one(): Add sanity check for correct total message size
We were sending malformed EOMA with total message size set to 0. This
issue has been fixed in the previous patch.

In this patch a sanity check is added to the RX path and a error message
is displayed.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:23 +01:00
Oleksij Rempel
eaa654f164 can: j1939: transport: j1939_session_fresh_new(): make sure EOMA is send with the total message size set
We were sending malformed EOMA messageswith total message size set to 0.

This patch fixes the bug.

Reported-by: https://github.com/linux-can/can-utils/issues/159
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:23 +01:00
Oleksij Rempel
896daf723c can: j1939: fix memory leak if filters was set
Filters array is coped from user space and linked to the j1939 socket.
On socket release this memory was not freed.

Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:23 +01:00
Colin Ian King
db1a804cca can: j1939: fix resource leak of skb on error return paths
Currently the error return paths do not free skb and this results in a
memory leak. Fix this by freeing them before the return.

Addresses-Coverity: ("Resource leak")
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:23 +01:00
Jeroen Hofstee
b5018be6d5 can: ti_hecc: add missing state changes
While the ti_hecc has interrupts to report when the error counters increase
to a certain level and which change state it doesn't handle the case that
the error counters go down again, so the reported state can actually be
wrong. Since there is no interrupt for that, do update state based on the
error counters, when the state is not error active and goes down again.

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:23 +01:00
Jeroen Hofstee
3b2d652da2 can: ti_hecc: properly report state changes
The HECC_CANES register handles the flags specially, it only updates
the flags after a one is written to them. Since the interrupt for
frame errors is not enabled an old error can hence been seen when a
state interrupt arrives. For example if the device is not connected
to the CAN-bus the error warning interrupt will have HECC_CANES
indicating there is no ack. The error passive interrupt thereafter
will have HECC_CANES flagging that there is a warning level. And if
thereafter there is a message successfully send HECC_CANES points to
an error passive event, while in reality it became error warning
again. In summary, the state is not always reported correctly.

So handle the state changes and frame errors separately. The state
changes are now based on the interrupt flags and handled directly
when they occur. The reporting of the frame errors is still done as
before, as a side effect of another interrupt.

note: the hecc_clear_bit will do a read, modify, write. So it will
not only clear the bit, but also reset all other bits being set as
a side affect, hence it is replaced with only clearing the flags.

note: The HECC_CANMC_CCR is no longer cleared in the state change
interrupt, it is completely unrelated.

And use net_ratelimit to make checkpatch happy.

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:23 +01:00
Jeroen Hofstee
678d85ed85 can: ti_hecc: add fifo overflow error reporting
When the rx FIFO overflows the ti_hecc would silently drop them since
the overwrite protection is enabled for all mailboxes. So disable it for
the lowest priority mailbox and return a proper error value when receive
message lost is set. Drop the message itself in that case, since it
might be partially updated.

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Acked-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:23 +01:00
Jeroen Hofstee
99383749c2 can: ti_hecc: release the mailbox a bit earlier
Release the mailbox after reading it, so it can be reused a bit earlier.
Since "can: rx-offload: continue on error" all pending message bits are
cleared directly, so remove clearing them in ti_hecc.

Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:23 +01:00
Jeroen Hofstee
10f5d55ddc can: ti_hecc: keep MIM and MD set
The HECC_CANMIM is set in the xmit path and cleared in the interrupt.
Since this is done with a read, modify, write action the register might
end up with some more MIM enabled then intended, since it is not
protected. That doesn't matter at all, since the tx interrupt disables
the mailbox with HECC_CANME (while holding a spinlock). So lets just
always keep MIM set.

While at it, since the mailbox direction never changes, don't set it
every time a message is send, ti_hecc_reset() already sets them to tx.

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:22 +01:00
Jeroen Hofstee
59f415c2f5 can: ti_hecc: ti_hecc_stop(): stop the CPK on down
When the interface goes down, the CPK should no longer take an active
part in the CAN-bus communication, like sending acks and error frames.
So enable configuration mode in ti_hecc_stop, so the CPK is no longer
active.

When a transceiver switch is present the acks and errors don't make it
to the bus, but disabling the CPK then does prevent oddities, like
ti_hecc_reset() failing, since the CPK can become bus-off and starts
counting the 11 bit recessive bits, which seems to block the reset. It
can also cause invalid interrupts and disrupt the CAN-bus, since
transmission can be stopped in the middle of a message, by disabling the
tranceiver while the CPK is sending.

Since the CPK is disabled after normal power on, it is typically only
seen when the interface is restarted.

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:22 +01:00
Marc Kleine-Budde
c4409e9fbe can: ti_hecc: ti_hecc_error(): increase error counters if skb enqueueing via can_rx_offload_queue_sorted() fails
The call to can_rx_offload_queue_sorted() may fail and return an error
(in the current implementation due to resource shortage). The passed skb
is consumed.

This patch adds incrementing of the appropriate error counters to let
the device statistics reflect that there's a problem.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:22 +01:00
Marc Kleine-Budde
758124335a can: flexcan: increase error counters if skb enqueueing via can_rx_offload_queue_sorted() fails
The call to can_rx_offload_queue_sorted() may fail and return an error
(in the current implementation due to resource shortage). The passed skb
is consumed.

This patch adds incrementing of the appropriate error counters to let
the device statistics reflect that there's a problem.

Reported-by: Martin Hundebøll <martin@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04 21:47:22 +01:00