mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 11:35:07 +07:00
b20209c91e
2651 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
844056fd74 |
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ... |
||
|
Linus Torvalds
|
36f20ee24b |
platform-drivers-x86 for v4.15-2
Fix two issues resulting from the dell-smbios refactoring and introduction of the dell-smbios-wmi dispatcher. The first ensures a proper error code is returned when kzalloc fails. The second avoids an issue in older Dell BIOS implementations which would fail if the more complex calls were made by limiting those platforms to the simple calls such as those used by the existing dell-laptop and dell-wmi drivers, preserving their functionality prior to the addition of the dell-smbios-wmi dispatcher. The following is an automated git shortlog grouped by driver: dell-laptop: - Fix error return code in dell_init() dell-smbios-wmi: - Disable userspace interface if missing hotfix -----BEGIN PGP SIGNATURE----- iQEcBAABAgAGBQJaFg4hAAoJEKbMaAwKp3647McIALuFgfx4WCM0QDlvvvyyjayv WtGcxGOgafPEVuHn5OyTIOYNlko009uhV/Y3D+F4/Fo4Q3zu3iBu479BALBXr9Uj OEkFxdJnrSTCpExsBDuCOEpB1eLvr2ceWF7KAmWR7cktLCtd6E7vNzLF/VOdiC/z yGvuAwQtMvX3RnR0DWFcx4qJPDyIZCQJ0HLYlTG6mPjR5YkyOkxhKnmIj+ljU5jV M7/yBH8EpI6YLjN0uGdWXHYiEp45OX5CJMSHGvKI6KE5s+6dy1r5fJWw/FLSSGgv wxBiuQuDGeDdqcKBCEAZ4fedvbQRJdSUlY/ZDgWtBzpSY/AdCexyY5zAR0XVxos= =NK+B -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v4.15-2' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Fix two issues resulting from the dell-smbios refactoring and introduction of the dell-smbios-wmi dispatcher. The first ensures a proper error code is returned when kzalloc fails. The second avoids an issue in older Dell BIOS implementations which would fail if the more complex calls were made by limiting those platforms to the simple calls such as those used by the existing dell-laptop and dell-wmi drivers, preserving their functionality prior to the addition of the dell-smbios-wmi dispatcher" * tag 'platform-drivers-x86-v4.15-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: dell-laptop: fix error return code in dell_init() platform/x86: dell-smbios-wmi: Disable userspace interface if missing hotfix |
||
|
Kees Cook
|
e99e88a9d2 |
treewide: setup_timer() -> timer_setup()
This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.
Casting from unsigned long:
void my_callback(unsigned long data)
{
struct something *ptr = (struct something *)data;
...
}
...
setup_timer(&ptr->my_timer, my_callback, ptr);
and forced object casts:
void my_callback(struct something *ptr)
{
...
}
...
setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);
become:
void my_callback(struct timer_list *t)
{
struct something *ptr = from_timer(ptr, t, my_timer);
...
}
...
timer_setup(&ptr->my_timer, my_callback, 0);
Direct function assignments:
void my_callback(unsigned long data)
{
struct something *ptr = (struct something *)data;
...
}
...
ptr->my_timer.function = my_callback;
have a temporary cast added, along with converting the args:
void my_callback(struct timer_list *t)
{
struct something *ptr = from_timer(ptr, t, my_timer);
...
}
...
ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;
And finally, callbacks without a data assignment:
void my_callback(unsigned long data)
{
...
}
...
setup_timer(&ptr->my_timer, my_callback, 0);
have their argument renamed to verify they're unused during conversion:
void my_callback(struct timer_list *unused)
{
...
}
...
timer_setup(&ptr->my_timer, my_callback, 0);
The conversion is done with the following Coccinelle script:
spatch --very-quiet --all-includes --include-headers \
-I ./arch/x86/include -I ./arch/x86/include/generated \
-I ./include -I ./arch/x86/include/uapi \
-I ./arch/x86/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi --include ./include/linux/kconfig.h \
--dir . \
--cocci-file ~/src/data/timer_setup.cocci
@fix_address_of@
expression e;
@@
setup_timer(
-&(e)
+&e
, ...)
// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@
(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)
@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@
(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
_E->_timer@_stl.function = _callback;
|
_E->_timer@_stl.function = &_callback;
|
_E->_timer@_stl.function = (_cast_func)_callback;
|
_E->_timer@_stl.function = (_cast_func)&_callback;
|
_E._timer@_stl.function = _callback;
|
_E._timer@_stl.function = &_callback;
|
_E._timer@_stl.function = (_cast_func)_callback;
|
_E._timer@_stl.function = (_cast_func)&_callback;
)
// callback(unsigned long arg)
@change_callback_handle_cast
depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@
void _callback(
-_origtype _origarg
+struct timer_list *t
)
{
(
... when != _origarg
_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle;
... when != _handle
_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle;
... when != _handle
_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
)
}
// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
depends on change_timer_function_usage &&
!change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@
void _callback(
-_origtype _origarg
+struct timer_list *t
)
{
+ _handletype *_origarg = from_timer(_origarg, t, _timer);
+
... when != _origarg
- (_handletype *)_origarg
+ _origarg
... when != _origarg
}
// Avoid already converted callbacks.
@match_callback_converted
depends on change_timer_function_usage &&
!change_callback_handle_cast &&
!change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@
void _callback(struct timer_list *t)
{ ... }
// callback(struct something *handle)
@change_callback_handle_arg
depends on change_timer_function_usage &&
!match_callback_converted &&
!change_callback_handle_cast &&
!change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@
void _callback(
-_handletype *_handle
+struct timer_list *t
)
{
+ _handletype *_handle = from_timer(_handle, t, _timer);
...
}
// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
depends on change_timer_function_usage &&
change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@
void _callback(struct timer_list *t)
{
- _handletype *_handle = from_timer(_handle, t, _timer);
}
// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
depends on change_timer_function_usage &&
!change_callback_handle_cast &&
!change_callback_handle_cast_no_arg &&
!change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@
(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)
// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
depends on change_timer_function_usage &&
(change_callback_handle_cast ||
change_callback_handle_cast_no_arg ||
change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@
(
_E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
;
|
_E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
;
|
_E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
;
)
// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
depends on change_timer_function_usage &&
(change_callback_handle_cast ||
change_callback_handle_cast_no_arg ||
change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@
_callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
)
// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@
(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)
@change_callback_unused_data
depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@
void _callback(
-_origtype _origarg
+struct timer_list *unused
)
{
... when != _origarg
}
Signed-off-by: Kees Cook <keescook@chromium.org>
|
||
|
weiyongjun (A)
|
c6f9288ee4 |
platform/x86: dell-laptop: fix error return code in dell_init()
Fix to return error code -ENOMEM from the kzalloc() error handling
case instead of 0, as done elsewhere in this function.
Fixes:
|
||
|
Mario Limonciello
|
4255c30fe8 |
platform/x86: dell-smbios-wmi: Disable userspace interface if missing hotfix
The Dell SMBIOS WMI interface will fail for some more complex calls unless a WMI hotfix has been included. Most platforms have this fix available in a maintenance BIOS release. In the case the driver is loaded on a platform without this fix, disable the userspace interface. A hotfix indicator is present in the dell-wmi-descriptor that represents whether or not more complex calls will work properly. "Simple" calls such as those used by dell-laptop and dell-wmi will continue to work properly so dell-smbios-wmi should not be blocked from binding and being used as the dell-smbios dispatcher. Suggested-by: Girish Prakash <girish.prakash@dell.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Linus Torvalds
|
0192f17529 |
clean up x86 platform driver default values
The updates this merge window added several bogus default enablement for new features. We don't do that. If people want new behavior, they ask for it. One 'default n' was also removed as pointless. That's great, but there were eight other ones in the same file that were left alone. Fix it up. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
07c455ee22 |
platform-drivers-x86 for v4.15-1
For this cycle we have quite an update for the Dell SMBIOS driver including WMI work to provide an interface for SMBIOS tokens via sysfs and WMI support for 2017+ Dell laptop models. SMM dispatcher code is split into a separate driver followed by a new WMI dispatcher. The latter provides a character device interface to user space. The pull request contains a merge of immutable branch from Wolfram Sang in order to apply a dependent fix to the Intel CherryTrail Battery Management driver. Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0 support is added for Intel Skylake. Peaq WMI hotkeys driver gets its own maintainer and white list of supported models. Silead DMI is expanded to support few additional platforms. Tablet mode via GMMS ACPI method is added to support some ThinkPad tablets. Two commits appear here which were previously merged during the v4.14-rcX cycle: - |
||
|
Hans de Goede
|
aaa40965d2 |
platform/x86: silead_dmi: Add silead, home-button property to some tablets
Add "silead,home-button" property to entries for tablets which have a capacitive home button (typically a windows logo on the front). This new property is checked for by the new capacitive home button support in the silead touchscreen driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Mario Limonciello
|
5246741a3f |
platform/x86: dell-laptop: Allocate buffer before rfkill use
On machines using rfkill interface the buffer needs to have been allocated before the initial use (memset) of it. Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
868b8d33f9 |
platform/x86: dell-*wmi*: Relay failed initial probe to dependent drivers
dell-wmi and dell-smbios-wmi are dependent upon dell-wmi-descriptor finishing probe successfully to probe themselves. Currently if dell-wmi-descriptor fails probing in a non-recoverable way (such as invalid header) dell-wmi and dell-smbios-wmi will continue to try to redo probing due to deferred probing. To solve this have the dependent drivers query the dell-wmi-descriptor driver whether the descriptor has been determined valid. The possible results are: -ENODEV: Descriptor GUID missing from WMI bus -EPROBE_DEFER: Descriptor not yet probed, dependent driver should wait and use deferred probing < 0: Descriptor probed, invalid. Dependent driver should return an error. 0: Successful descriptor probe, dependent driver can continue Successful descriptor probe still doesn't mean that the descriptor driver is necessarily bound at the time of initialization of dependent driver. Userspace can unbind the driver, so all methods used from driver should still be verified to return success values otherwise deferred probing be used. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
8b9528a6d9 |
platform/x86: dell-wmi-descriptor: check if memory was allocated
devm_kzalloc will return NULL pointer if no memory was allocated. This should be checked. This problem also existed when the driver was dell-wmi.c. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Linus Torvalds
|
1be2172e96 |
Modules updates for v4.15
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
|
||
|
Linus Torvalds
|
9682b3dea2 |
Merge branch 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina: "The usual rocket-science from trivial tree for 4.15" * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: MAINTAINERS: relinquish kconfig MAINTAINERS: Update my email address treewide: Fix typos in Kconfig kfifo: Fix comments init/Kconfig: Fix module signing document location misc: ibmasm: Return error on error path HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback" MAINTAINERS: Correct path to uDraw PS3 driver tracing: Fix doc mistakes in trace sample tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig mm/huge_memory.c: fixup grammar in comment lib/xz: Add fall-through comments to a switch statement |
||
|
Linus Torvalds
|
6aa2f9441f |
This is the bulk of GPIO changes for the v4.15 kernel cycle:
CORE:
- Fix the semantics of raw GPIO to actually be raw. No
inversion semantics as before, but also no open draining,
and allow the raw operations to affect lines used for
interrupts as the caller supposedly knows what they are
doing if they are getting the big hammer.
- Rewrote the __inner_function() notation calls to names that
make more sense. I just find this kind of code disturbing.
- Drop the .irq_base() field from the gpiochip since now all
IRQs are mapped dynamically. This is nice.
- Support for .get_multiple() in the core driver API. This
allows us to read several GPIO lines with a single
register read. This has high value for some usecases: it
can be used to create oscilloscopes and signal analyzers
and other things that rely on reading several lines at
exactly the same instant. Also a generally nice
optimization. This uses the new assign_bit() macro from
the bitops lib that was ACKed by Andrew Morton and
is implemented for two drivers, one of them being the
generic MMIO driver so everyone using that will be able
to benefit from this.
- Do not allow requests of Open Drain and Open Source
setting of a GPIO line simultaneously. If the hardware
actually supports enabling both at the same time the
electrical result would be disastrous.
- A new interrupt chip core helper. This will be helpful
to deal with "banked" GPIOs, which means GPIO controllers
with several logical blocks of GPIO inside them. This
is several gpiochips per device in the device model, in
contrast to the case when there is a 1-to-1 relationship
between a device and a gpiochip.
NEW DRIVERS:
- Maxim MAX3191x industrial serializer, a very interesting
piece of professional I/O hardware.
- Uniphier GPIO driver. This is the GPIO block from the
recent Socionext (ex Fujitsu and Panasonic) platform.
- Tegra 186 driver. This is based on the new banked GPIO
infrastructure.
OTHER IMPROVEMENTS:
- Some documentation improvements.
- Wakeup support for the DesignWare DWAPB GPIO controller.
- Reset line support on the DesignWare DWAPB GPIO controller.
- Several non-critical bug fixes and improvements for the
Broadcom BRCMSTB driver.
- Misc non-critical bug fixes like exotic errorpaths, removal
of dead code etc.
- Explicit comments on fall-through switch() statements.
-----BEGIN PGP SIGNATURE-----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=8Mon
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.15 kernel cycle:
Core:
- Fix the semantics of raw GPIO to actually be raw. No inversion
semantics as before, but also no open draining, and allow the raw
operations to affect lines used for interrupts as the caller
supposedly knows what they are doing if they are getting the big
hammer.
- Rewrote the __inner_function() notation calls to names that make
more sense. I just find this kind of code disturbing.
- Drop the .irq_base() field from the gpiochip since now all IRQs are
mapped dynamically. This is nice.
- Support for .get_multiple() in the core driver API. This allows us
to read several GPIO lines with a single register read. This has
high value for some usecases: it can be used to create
oscilloscopes and signal analyzers and other things that rely on
reading several lines at exactly the same instant. Also a generally
nice optimization. This uses the new assign_bit() macro from the
bitops lib that was ACKed by Andrew Morton and is implemented for
two drivers, one of them being the generic MMIO driver so everyone
using that will be able to benefit from this.
- Do not allow requests of Open Drain and Open Source setting of a
GPIO line simultaneously. If the hardware actually supports
enabling both at the same time the electrical result would be
disastrous.
- A new interrupt chip core helper. This will be helpful to deal with
"banked" GPIOs, which means GPIO controllers with several logical
blocks of GPIO inside them. This is several gpiochips per device in
the device model, in contrast to the case when there is a 1-to-1
relationship between a device and a gpiochip.
New drivers:
- Maxim MAX3191x industrial serializer, a very interesting piece of
professional I/O hardware.
- Uniphier GPIO driver. This is the GPIO block from the recent
Socionext (ex Fujitsu and Panasonic) platform.
- Tegra 186 driver. This is based on the new banked GPIO
infrastructure.
Other improvements:
- Some documentation improvements.
- Wakeup support for the DesignWare DWAPB GPIO controller.
- Reset line support on the DesignWare DWAPB GPIO controller.
- Several non-critical bug fixes and improvements for the Broadcom
BRCMSTB driver.
- Misc non-critical bug fixes like exotic errorpaths, removal of dead
code etc.
- Explicit comments on fall-through switch() statements"
* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
gpio: tegra186: Remove tegra186_gpio_lock_class
gpio: rcar: Add r8a77995 (R-Car D3) support
pinctrl: bcm2835: Fix some merge fallout
gpio: Fix undefined lock_dep_class
gpio: Automatically add lockdep keys
gpio: Introduce struct gpio_irq_chip.first
gpio: Disambiguate struct gpio_irq_chip.nested
gpio: Add Tegra186 support
gpio: Export gpiochip_irq_{map,unmap}()
gpio: Implement tighter IRQ chip integration
gpio: Move lock_key into struct gpio_irq_chip
gpio: Move irq_valid_mask into struct gpio_irq_chip
gpio: Move irq_nested into struct gpio_irq_chip
gpio: Move irq_chained_parent to struct gpio_irq_chip
gpio: Move irq_default_type to struct gpio_irq_chip
gpio: Move irq_handler to struct gpio_irq_chip
gpio: Move irqdomain into struct gpio_irq_chip
gpio: Move irqchip into struct gpio_irq_chip
gpio: Introduce struct gpio_irq_chip
pinctrl: armada-37xx: remove unused variable
...
|
||
|
Linus Torvalds
|
449fcf3ab0 |
Staging/IIO patches for 4.15-rc1
Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnFrg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymxbwCgtNlBkqD2JJYpLRKvI/C4w1vzZsEAnA2THRkt g3ioPBqmqC/2DSbldr2o =/ebw -----END PGP SIGNATURE----- Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ... |
||
|
Andy Shevchenko
|
73ed298b06 |
platform/x86: Revert intel_pmc_ipc: Use MFD framework to create dependent devices
Heikki discovered a runtime issue with this patch. Taking into
consideration we have no time to test any fix right now, revert the
commit
|
||
|
Mario Limonciello
|
307ab2a99d |
platform/x86: dell-smbios-wmi: release mutex lock on WMI call failure
Unbound devices may race with calling this function causing the mutex to stay locked. This failure mode should have released the mutex too. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
5e3e22971f |
platform/x86: wmi: release mutex on module acquistion failure
This failure mode should have also released the mutex. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Arnd Bergmann
|
54d11736ec |
platform/x86: dell-smbios: fix string overflow
The new sysfs code overwrites two fixed-length character arrays that are each one byte shorter than they need to be, to hold the trailing \0: drivers/platform/x86/dell-smbios.c: In function 'build_tokens_sysfs': drivers/platform/x86/dell-smbios.c:494:42: error: 'sprintf' writing a terminating nul past the end of the destination [-Werror=format-overflow=] sprintf(buffer_location, "%04x_location", drivers/platform/x86/dell-smbios.c:494:3: note: 'sprintf' output 14 bytes into a destination of size 13 drivers/platform/x86/dell-smbios.c:506:36: error: 'sprintf' writing a terminating nul past the end of the destination [-Werror=format-overflow=] sprintf(buffer_value, "%04x_value", drivers/platform/x86/dell-smbios.c:506:3: note: 'sprintf' output 11 bytes into a destination of size 10 This changes it to just use kasprintf(), which always gets it right. Discovered with gcc-7.1.1 with the following commit reverted: |
||
|
Thierry Reding
|
dc7b0387ee |
gpio: Move irq_valid_mask into struct gpio_irq_chip
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Thierry Reding
|
f0fbe7bce7 |
gpio: Move irqdomain into struct gpio_irq_chip
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Kuppuswamy Sathyanarayanan
|
43aaf4f03f |
platform/x86: intel_pmc_ipc: Use MFD framework to create dependent devices
Currently, we have lot of repetitive code in dependent device resource allocation and device creation handling code. This logic can be improved if we use MFD framework for dependent device creation. This patch adds this support. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Kuppuswamy Sathyanarayanan
|
6cc8cbbc88 |
platform/x86: intel_punit_ipc: Fix resource ioremap warning
For PUNIT device, ISPDRIVER_IPC and GTDDRIVER_IPC resources are not mandatory. So when PMC IPC driver creates a PUNIT device, if these resources are not available then it creates dummy resource entries for these missing resources. But during PUNIT device probe, doing ioremap on these dummy resources generates following warning messages. intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] intel_punit_ipc: can't request region for resource [mem 0x00000000] This patch fixes this issue by adding extra check for resource size before performing ioremap operation. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Colin Ian King
|
ce7ff1cffd |
platform/x86: dell-smo8800: remove redundant assignments to byte_data
Variable byte_data is being initialized and re-assigned with values that are never read. Remove these as these redundant assignments. Cleans up clang warning: drivers/platform/x86/dell-smo8800.c:106:2: warning: Value stored to 'byte_data' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Stefan Brüns
|
9968e12a29 |
platform/x86: hp-wmi: Fix tablet mode detection for convertibles
Commit |
||
|
Kees Cook
|
fbc15e3040 |
platform/x86: intel_ips: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Moves timer structure off stack and into struct ips_driver. Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: platform-driver-x86@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Markus Elfring
|
e4a18052bb |
platform/x86: sony-laptop: Drop variable assignment in sony_nc_setup_rfkill()
The local variable "err" will eventually be set to an appropriate value a bit later. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Markus Elfring
|
f6c8a317ab |
platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()
Source code review for a specific software refactoring showed the need
for another correction because the error code "-1" was returned so far
if a call of the function "sony_call_snc_handle" failed here.
Thus assign the return value from these two function calls also to
the variable "err" and provide it in case of a failure.
Fixes:
|
||
|
Mario Limonciello
|
f2645fa317 |
platform/x86: dell-smbios-wmi: introduce userspace interface
It's important for the driver to provide a R/W ioctl to ensure that two competing userspace processes don't race to provide or read each others data. This userspace character device will be used to perform SMBIOS calls from any applications. It provides an ioctl that will allow passing the WMI calling interface buffer between userspace and kernel space. This character device is intended to deprecate the dcdbas kernel module and the interface that it provides to userspace. To perform an SMBIOS IOCTL call using the character device userspace will perform a read() on the the character device. The WMI bus will provide a u64 variable containing the necessary size of the IOCTL buffer. The API for interacting with this interface is defined in documentation as well as the WMI uapi header provides the format of the structures. Not all userspace requests will be accepted. The dell-smbios filtering functionality will be used to prevent access to certain tokens and calls. All whitelisted commands and tokens are now shared out to userspace so applications don't need to define them in their own headers. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
44b6b76611 |
platform/x86: wmi: create userspace interface for drivers
For WMI operations that are only Set or Query readable and writable sysfs attributes created by WMI vendor drivers or the bus driver makes sense. For other WMI operations that are run on Method, there needs to be a way to guarantee to userspace that the results from the method call belong to the data request to the method call. Sysfs attributes don't work well in this scenario because two userspace processes may be competing at reading/writing an attribute and step on each other's data. When a WMI vendor driver declares a callback method in the wmi_driver the WMI bus driver will create a character device that maps to that function. This callback method will be responsible for filtering invalid requests and performing the actual call. That character device will correspond to this path: /dev/wmi/$driver Performing read() on this character device will provide the size of the buffer that the character device needs to perform calls. This buffer size can be set by vendor drivers through a new symbol or when MOF parsing is available by the MOF. Performing ioctl() on this character device will be interpretd by the WMI bus driver. It will perform sanity tests for size of data, test them for a valid instance, copy the data from userspace and pass iton to the vendor driver to further process and run. This creates an implicit policy that each driver will only be allowed a single character device. If a module matches multiple GUID's, the wmi_devices will need to be all handled by the same wmi_driver. The WMI vendor drivers will be responsible for managing inappropriate access to this character device and proper locking on data used by it. When a WMI vendor driver is unloaded the WMI bus driver will clean up the character device and any memory allocated for the call. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
1f8543a5d6 |
platform/x86: dell-smbios: Add filtering support
When a userspace interface is introduced to dell-smbios filtering support will be used to make sure that userspace doesn't make calls deemed unsafe or that can cause the kernel drivers to get out of sync. A blacklist is provided for the following: - Items that are in use by other kernel drivers - Items that are deemed unsafe (diagnostics, write-once, etc) - Any items in the blacklist will be rejected. Following that a whitelist is provided as follows: - Each item has an associated capability. If a userspace interface accesses this item, that capability will be tested to filter the request. - If the process provides CAP_SYS_RAWIO the whitelist will be overridden. When an item is not in the blacklist, or whitelist and the process is run with insufficient capabilities the call will be rejected. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
da1f607ed6 |
platform/x86: dell-smbios-smm: test for WSMT
WSMT is as an attestation to the OS that the platform won't modify memory outside of pre-defined areas. If a platform has WSMT enabled in BIOS setup, SMM calls through dcdbas will fail. The only way to access platform data in these instances is through the WMI SMBIOS calling interface. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
1a258e6704 |
platform/x86: dell-smbios-wmi: Add new WMI dispatcher driver
The dell-smbios stack only currently uses an SMI interface which grants direct access to physical memory to the firmware SMM methods via a pointer. This dispatcher driver adds a WMI-ACPI interface that is detected by WMI probe and preferred over the SMI interface in dell-smbios. Changing this to operate over WMI-ACPI will use an ACPI OperationRegion for a buffer of data storage when SMM calls are performed. This is a safer approach to use in kernel drivers as the SMM will only have access to that OperationRegion. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
549b4930f0 |
platform/x86: dell-smbios: Introduce dispatcher for SMM calls
This splits up the dell-smbios driver into two drivers: * dell-smbios * dell-smbios-smm dell-smbios can operate with multiple different dispatcher drivers to perform SMBIOS operations. Also modify the interface that dell-laptop and dell-wmi use align to this model more closely. Rather than a single global buffer being allocated for all drivers, each driver will allocate and be responsible for it's own buffer. The pointer will be passed to the calling function and each dispatcher driver will then internally copy it to the proper location to perform it's call. Add defines for calls used by these methods in the dell-smbios.h header for tracking purposes. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
33b9ca1e53 |
platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens
Currently userspace tools can access system tokens via the dcdbas kernel module and a SMI call that will cause the platform to execute SMM code. With a goal in mind of deprecating the dcdbas kernel module a different method for accessing these tokens from userspace needs to be created. This is intentionally marked to only be readable as a process with CAP_SYS_ADMIN as it can contain sensitive information about the platform's configuration. While adding this interface I found that some tokens are duplicated. These need to be ignored from sysfs to avoid duplicate files. MAINTAINERS was missing for this driver. Add myself and Pali to maintainers list for it. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
980f481d63 |
platform/x86: dell-smbios: only run if proper oem string is detected
The proper way to indicate that a system is a 'supported' Dell System is by the presence of this string in OEM strings. Allowing the driver to load on non-Dell systems will have undefined results. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
f97e058cfe |
platform/x86: wmi: Don't allow drivers to get each other's GUIDs
The only driver using this was dell-wmi, and it really was a hack. The driver was getting a data attribute from another driver and this type of action should not be encouraged. Rather drivers that need to interact with one another should pass data back and forth via exported functions. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
92b8c540bc |
platform/x86: dell-wmi-descriptor: split WMI descriptor into it's own driver
All communication on individual GUIDs should occur in separate drivers. Allowing a driver to communicate with the bus to another GUID is just a hack that discourages drivers to adopt the bus model. The information found from the WMI descriptor driver is now exported for use by other drivers. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
fa9f924c7f |
platform/x86: dell-wmi: don't check length returned
This is intended to be variable and provided by the platform. Some platforms this year will be adopting a 32k WMI buffer, so don't complain when encountering those platforms or any other future changes. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
7e6dcbebcb |
platform/x86: dell-wmi: clean up wmi descriptor check
Some cases the wrong type was used for errors and checks can be done more cleanly. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
d0bf42d83e |
platform/x86: dell-wmi: increase severity of some failures
There is a lot of error checking in place for the format of the WMI descriptor buffer, but some of the potentially raised issues should be considered critical failures. If the buffer size or header don't match, this is a good indication that the buffer format changed in a way that the rest of the data should not be relied upon. For the remaining data set vectors, continue to notate a warning in undefined results, but as those are fields that the descriptor intended to refer to other applications, don't fail if they're new values. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
722c856d46 |
platform/x86: wmi: Add new method wmidev_evaluate_method
Drivers properly using the wmibus can pass their wmi_device pointer rather than the GUID back to the WMI bus to evaluate the proper methods. Any "new" drivers added that use the WMI bus should use this rather than the old wmi_evaluate_method that would take the GUID. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Mario Limonciello
|
f35a8efe2c |
platform/x86: dell-smbios: Prefix class/select with cmd_
Later on these structures will be brought up to userspace. the word "class" is a reserved word in c++ and this will prevent uapi headers from being included directly in c++ programs. To make life easier on these applications, prepare the change now. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
|
Hans de Goede
|
455e027f33 |
platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
The fusb302 driver as merged in staging uses "typec_fusb302" as i2c-id rather then just "fusb302" and needs us to set a number of device- properties, adjust the intel_cht_int33fe driver accordingly. One of the properties set is max-snk-mv which makes the fusb302 driver negotiate up to 12V charging voltage, which is a bad idea on boards which are not setup to handle this, so this commit also adds 2 extra sanity checks to make sure that the expected Whiskey Cove PMIC + TI bq24292i charger combo, which can handle 12V, is present. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Sergey Tshovrebov
|
3fcf2b2a25 |
platform/x86: silead_dmi: Add entry for the Digma e200 tablet
Add touchscreen platform data for the Digma e200 tablet. Signed-off-by: Sergey Tshovrebov <sinxwal@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Hans de Goede
|
5c24c05efa |
platform/x86: silead_dmi: Fix GP-electronic T701 entry
The GP-electronic T701 has its LCD panel mounted upside-down, initially my plan was to fix this by transparently rotating the image in the i915 driver (my "drm/i915: Deal with upside-down mounted LCD" patch), but that approach has been rejected instead the kernel will now export a "panel orientation" property on the drm-connector for the panel and let userspace deal with it. But userspace expects the touchscreen coordinates to match the panel coordinates *before* applying any rotation, so now that we no longer hide the upside-down-ness of the LCD panel from userspace the coordinates being generated are wrong and we need to apply a rotation of 180 degrees to the coordinates to fix this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Hans de Goede
|
f6c7b8031d |
platform/x86: peaq-wmi: Remove unnecessary checks from peaq_wmi_exit
peaq_wmi_exit will only ever get called if peaq_wmi_init succeeds, so there is no need to repeat the checks from peaq_wmi_init. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
||
|
Hans de Goede
|
d6fa71f1c0 |
platform/x86: peaq_wmi: Fix missing terminating entry for peaq_dmi_table
Add missing terminating entry to peaq_dmi_table.
Fixes:
|
||
|
Linus Torvalds
|
ead751507d |
License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
||
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |