The EAS wake-up path computes the system energy for several CPU
candidates: the CPU with maximum spare capacity in each performance
domain, and the prev_cpu. However, if prev_cpu also happens to be the
CPU with maximum spare capacity in its performance domain, the energy
calculation is still done twice, unnecessarily.
Add a condition to filter out this corner case before doing the energy
calculation.
Reported-by: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Quentin Perret <qperret@qperret.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: juri.lelli@redhat.com
Cc: morten.rasmussen@arm.com
Cc: qais.yousef@arm.com
Cc: rjw@rjwysocki.net
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Fixes: eb92692b25 ("sched/fair: Speed-up energy-aware wake-ups")
Link: https://lkml.kernel.org/r/20190920094115.GA11503@qperret.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
update_max_interval() is called in both CPUHP_AP_SCHED_STARTING's startup
and teardown callbacks, but it turns out it's also called at the end of
the startup callback of CPUHP_AP_ACTIVE (which is further down the
startup sequence).
There's no point in repeating this interval update in the startup sequence
since the CPU will remain online until it goes down the teardown path.
Remove the redundant call in sched_cpu_activate() (CPUHP_AP_ACTIVE).
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: juri.lelli@redhat.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190923093017.11755-1-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
de53fd7aed ("sched/fair: Fix low cpu usage with high throttling by removing expiration of cpu-local slices")
introduced a few compilation warnings:
kernel/sched/fair.c: In function '__refill_cfs_bandwidth_runtime':
kernel/sched/fair.c:4365:6: warning: variable 'now' set but not used [-Wunused-but-set-variable]
kernel/sched/fair.c: In function 'start_cfs_bandwidth':
kernel/sched/fair.c:4992:6: warning: variable 'overrun' set but not used [-Wunused-but-set-variable]
Also, __refill_cfs_bandwidth_runtime() does no longer update the
expiration time, so fix the comments accordingly.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Dave Chiluk <chiluk+linux@indeed.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pauld@redhat.com
Fixes: de53fd7aed ("sched/fair: Fix low cpu usage with high throttling by removing expiration of cpu-local slices")
Link: https://lkml.kernel.org/r/1566326455-8038-1-git-send-email-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
An oops can be triggered in the scheduler when running qemu on arm64:
Unable to handle kernel paging request at virtual address ffff000008effe40
Internal error: Oops: 96000007 [#1] SMP
Process migration/0 (pid: 12, stack limit = 0x00000000084e3736)
pstate: 20000085 (nzCv daIf -PAN -UAO)
pc : __ll_sc___cmpxchg_case_acq_4+0x4/0x20
lr : move_queued_task.isra.21+0x124/0x298
...
Call trace:
__ll_sc___cmpxchg_case_acq_4+0x4/0x20
__migrate_task+0xc8/0xe0
migration_cpu_stop+0x170/0x180
cpu_stopper_thread+0xec/0x178
smpboot_thread_fn+0x1ac/0x1e8
kthread+0x134/0x138
ret_from_fork+0x10/0x18
__set_cpus_allowed_ptr() will choose an active dest_cpu in affinity mask to
migrage the process if process is not currently running on any one of the
CPUs specified in affinity mask. __set_cpus_allowed_ptr() will choose an
invalid dest_cpu (dest_cpu >= nr_cpu_ids, 1024 in my virtual machine) if
CPUS in an affinity mask are deactived by cpu_down after cpumask_intersects
check. cpumask_test_cpu() of dest_cpu afterwards is overflown and may pass if
corresponding bit is coincidentally set. As a consequence, kernel will
access an invalid rq address associate with the invalid CPU in
migration_cpu_stop->__migrate_task->move_queued_task and the Oops occurs.
The reproduce the crash:
1) A process repeatedly binds itself to cpu0 and cpu1 in turn by calling
sched_setaffinity.
2) A shell script repeatedly does "echo 0 > /sys/devices/system/cpu/cpu1/online"
and "echo 1 > /sys/devices/system/cpu/cpu1/online" in turn.
3) Oops appears if the invalid CPU is set in memory after tested cpumask.
Signed-off-by: KeMeng Shi <shikemeng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1568616808-16808-1-git-send-email-shikemeng@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove the IPI fallback code from membarrier to deal with very
infrequent cpumask memory allocation failure. Use GFP_KERNEL rather
than GFP_NOWAIT, and relax the blocking guarantees for the expedited
membarrier system call commands, allowing it to block if waiting for
memory to be made available.
In addition, now -ENOMEM can be returned to user-space if the cpumask
memory allocation fails.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-8-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If there is only a single mm_user for the mm, the private expedited
membarrier command can skip the IPIs, because only a single thread
is using the mm.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-7-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
membarrier commands cover very different code paths if they are in
a single-threaded vs multi-threaded process. Therefore, exercise both
scenarios in the kernel selftests to increase coverage of this selftest.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-6-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The membarrier_state field is located within the mm_struct, which
is not guaranteed to exist when used from runqueue-lock-free iteration
on runqueues by the membarrier system call.
Copy the membarrier_state from the mm_struct into the scheduler runqueue
when the scheduler switches between mm.
When registering membarrier for mm, after setting the registration bit
in the mm membarrier state, issue a synchronize_rcu() to ensure the
scheduler observes the change. In order to take care of the case
where a runqueue keeps executing the target mm without swapping to
other mm, iterate over each runqueue and issue an IPI to copy the
membarrier_state from the mm_struct into each runqueue which have the
same mm which state has just been modified.
Move the mm membarrier_state field closer to pgd in mm_struct to use
a cache line already touched by the scheduler switch_mm.
The membarrier_execve() (now membarrier_exec_mmap) hook now needs to
clear the runqueue's membarrier state in addition to clear the mm
membarrier state, so move its implementation into the scheduler
membarrier code so it can access the runqueue structure.
Add memory barrier in membarrier_exec_mmap() prior to clearing
the membarrier state, ensuring memory accesses executed prior to exec
are not reordered with the stores clearing the membarrier state.
As suggested by Linus, move all membarrier.c RCU read-side locks outside
of the for each cpu loops.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-5-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the prev and next task's mm change, switch_mm() provides the core
serializing guarantees before returning to usermode. The only case
where an explicit core serialization is needed is when the scheduler
keeps the same mm for prev and next.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-4-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Checking that the number of threads is 1 is redundant with checking
mm_users == 1.
No change in functionality intended.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-3-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix a logic flaw in the way membarrier_register_private_expedited()
handles ready state checks for private expedited sync core and private
expedited registrations.
If a private expedited membarrier registration is first performed, and
then a private expedited sync_core registration is performed, the ready
state check will skip the second registration when it really should not.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-2-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current task on the runqueue is currently read with rcu_dereference().
To obtain ordinary RCU semantics for an rcu_dereference() of rq->curr it needs
to be paired with rcu_assign_pointer() of rq->curr. Which provides the
memory barrier necessary to order assignments to the task_struct
and the assignment to rq->curr.
Unfortunately the assignment of rq->curr in __schedule is a hot path,
and it has already been show that additional barriers in that code
will reduce the performance of the scheduler. So I will attempt to
describe below why you can effectively have ordinary RCU semantics
without any additional barriers.
The assignment of rq->curr in init_idle is a slow path called once
per cpu and that can use rcu_assign_pointer() without any concerns.
As I write this there are effectively two users of rcu_dereference() on
rq->curr. There is the membarrier code in kernel/sched/membarrier.c
that only looks at "->mm" after the rcu_dereference(). Then there is
task_numa_compare() in kernel/sched/fair.c. My best reading of the
code shows that task_numa_compare only access: "->flags",
"->cpus_ptr", "->numa_group", "->numa_faults[]",
"->total_numa_faults", and "->se.cfs_rq".
The code in __schedule() essentially does:
rq_lock(...);
smp_mb__after_spinlock();
next = pick_next_task(...);
rq->curr = next;
context_switch(prev, next);
At the start of the function the rq_lock/smp_mb__after_spinlock
pair provides a full memory barrier. Further there is a full memory barrier
in context_switch().
This means that any task that has already run and modified itself (the
common case) has already seen two memory barriers before __schedule()
runs and begins executing. A task that modifies itself then sees a
third full memory barrier pair with the rq_lock();
For a brand new task that is enqueued with wake_up_new_task() there
are the memory barriers present from the taking and release the
pi_lock and the rq_lock as the processes is enqueued as well as the
full memory barrier at the start of __schedule() assuming __schedule()
happens on the same cpu.
This means that by the time we reach the assignment of rq->curr
except for values on the task struct modified in pick_next_task
the code has the same guarantees as if it used rcu_assign_pointer().
Reading through all of the implementations of pick_next_task it
appears pick_next_task is limited to modifying the task_struct fields
"->se", "->rt", "->dl". These fields are the sched_entity structures
of the varies schedulers.
Further "->se.cfs_rq" is only changed in cgroup attach/move operations
initialized by userspace.
Unless I have missed something this means that in practice that the
users of "rcu_dereference(rq->curr)" get normal RCU semantics of
rcu_dereference() for the fields the care about, despite the
assignment of rq->curr in __schedule() ot using rcu_assign_pointer.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20190903200603.GW2349@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove work arounds that were written before there was a grace period
after tasks left the runqueue in finish_task_switch().
In particular now that there tasks exiting the runqueue exprience
a RCU grace period none of the work performed by task_rcu_dereference()
excpet the rcu_dereference() is necessary so replace task_rcu_dereference()
with rcu_dereference().
Remove the code in rcuwait_wait_event() that checks to ensure the current
task has not exited. It is no longer necessary as it is guaranteed
that any running task will experience a RCU grace period after it
leaves the run queueue.
Remove the comment in rcuwait_wake_up() as it is no longer relevant.
Ref: 8f95c90ceb ("sched/wait, RCU: Introduce rcuwait machinery")
Ref: 150593bf86 ("sched/api: Introduce task_rcu_dereference() and try_get_task_struct()")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87lfurdpk9.fsf_-_@x220.int.ebiederm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the ordinary case today the RCU grace period for a task_struct is
triggered when another process wait's for it's zombine and causes the
kernel to call release_task(). As the waiting task has to receive a
signal and then act upon it before this happens, typically this will
occur after the original task as been removed from the runqueue.
Unfortunaty in some cases such as self reaping tasks it can be shown
that release_task() will be called starting the grace period for
task_struct long before the task leaves the runqueue.
Therefore use put_task_struct_rcu_user() in finish_task_switch() to
guarantee that the there is a RCU lifetime after the task
leaves the runqueue.
Besides the change in the start of the RCU grace period for the
task_struct this change may cause perf_event_delayed_put and
trace_sched_process_free. The function perf_event_delayed_put boils
down to just a WARN_ON for cases that I assume never show happen. So
I don't see any problem with delaying it.
The function trace_sched_process_free is a trace point and thus
visible to user space. Occassionally userspace has the strangest
dependencies so this has a miniscule chance of causing a regression.
This change only changes the timing of when the tracepoint is called.
The change in timing arguably gives userspace a more accurate picture
of what is going on. So I don't expect there to be a regression.
In the case where a task self reaps we are pretty much guaranteed that
the RCU grace period is delayed. So we should get quite a bit of
coverage in of this worst case for the change in a normal threaded
workload. So I expect any issues to turn up quickly or not at all.
I have lightly tested this change and everything appears to work
fine.
Inspired-by: Linus Torvalds <torvalds@linux-foundation.org>
Inspired-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87r24jdpl5.fsf_-_@x220.int.ebiederm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a count of the number of RCU users (currently 1) of the task
struct so that we can later add the scheduler case and get rid of the
very subtle task_rcu_dereference(), and just use rcu_dereference().
As suggested by Oleg have the count overlap rcu_head so that no
additional space in task_struct is required.
Inspired-by: Linus Torvalds <torvalds@linux-foundation.org>
Inspired-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87woebdplt.fsf_-_@x220.int.ebiederm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are statements that are indented incorrectly, remove the
extraneous spacing.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[BUG]
With v5.3 kernel, we can't convert to SINGLE profile:
# btrfs balance start -f -dconvert=single $mnt
ERROR: error during balancing '/mnt/btrfs': Invalid argument
# dmesg -t | tail
validate_convert_profile: data profile=0x1000000000000 allowed=0x20 is_valid=1 final=0x1000000000000 ret=1
BTRFS error (device dm-3): balance: invalid convert data profile single
[CAUSE]
With the extra debug output added, it shows that the @allowed bit is
lacking the special in-memory only SINGLE profile bit.
Thus we fail at that (profile & ~allowed) check.
This regression is caused by commit 081db89b13 ("btrfs: use raid_attr
to get allowed profiles for balance conversion") and the fact that we
don't use any bit to indicate SINGLE profile on-disk, but uses special
in-memory only bit to help distinguish different profiles.
[FIX]
Add that BTRFS_AVAIL_ALLOC_BIT_SINGLE to @allowed, so the code should be
the same as it was and fix the regression.
Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: 081db89b13 ("btrfs: use raid_attr to get allowed profiles for balance conversion")
CC: stable@vger.kernel.org # 5.3+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following was reported on i386:
arch/x86/kvm/vmx/vmx.c: In function 'hv_enable_direct_tlbflush':
arch/x86/kvm/vmx/vmx.c:503:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
pr_debugs() in this function are more or less useless, let's just
remove them. evmcs->hv_vm_id can use 'unsigned long' instead of 'u64'.
Also, simplify the code a little bit.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the kvm_rebooting check from VMX/SVM instruction exception fixup
now that kvm_spurious_fault() conditions its BUG() on !kvm_rebooting.
Because the 'cleanup_insn' functionally is also gone, deferring to
kvm_spurious_fault() means __kvm_handle_fault_on_reboot() can eliminate
its .fixup code entirely and have its exception table entry branch
directly to the call to kvm_spurious_fault().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the variation of __kvm_handle_fault_on_reboot() that accepts a
post-fault cleanup instruction now that its sole user (VMREAD) uses
a different method for handling faults.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that VMREAD flows require a taken branch, courtesy of commit
3901336ed9 ("x86/kvm: Don't call kvm_spurious_fault() from .fixup")
bite the bullet and add full error handling to VMREAD, i.e. replace the
JMP added by __ex()/____kvm_handle_fault_on_reboot() with a hinted Jcc.
To minimize the code footprint, add a helper function, vmread_error(),
to handle both faults and failures so that the inline flow has a single
CALL.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the VMX instruction helpers using asm-goto to branch directly
to error/fault "handlers" in lieu of using __ex(), i.e. the generic
____kvm_handle_fault_on_reboot(). Branching directly to fault handling
code during fixup avoids the extra JMP that is inserted after every VMX
instruction when using the generic "fault on reboot" (see commit
3901336ed9, "x86/kvm: Don't call kvm_spurious_fault() from .fixup").
Opportunistically clean up the helpers so that they all have consistent
error handling and messages.
Leave the usage of ____kvm_handle_fault_on_reboot() (via __ex()) in
kvm_cpu_vmxoff() and nested_vmx_check_vmentry_hw() as is. The VMXOFF
case is not a fast path, i.e. the cleanliness of __ex() is worth the
JMP, and the extra JMP in nested_vmx_check_vmentry_hw() is unavoidable.
Note, VMREAD cannot get the asm-goto treatment as output operands aren't
compatible with GCC's asm-goto due to internal compiler restrictions.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[BUG]
One user reported a reproducible KASAN report about use-after-free:
BTRFS info (device sdi1): balance: start -dvrange=1256811659264..1256811659265
BTRFS info (device sdi1): relocating block group 1256811659264 flags data|raid0
==================================================================
BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
Write of size 8 at addr ffff88856f671710 by task kworker/u24:10/261579
CPU: 2 PID: 261579 Comm: kworker/u24:10 Tainted: P OE 5.2.11-arch1-1-kasan #4
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./X99 Extreme4, BIOS P3.80 04/06/2018
Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
Call Trace:
dump_stack+0x7b/0xba
print_address_description+0x6c/0x22e
? btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
__kasan_report.cold+0x1b/0x3b
? btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
kasan_report+0x12/0x17
__asan_report_store8_noabort+0x17/0x20
btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
record_root_in_trans+0x2a0/0x370 [btrfs]
btrfs_record_root_in_trans+0xf4/0x140 [btrfs]
start_transaction+0x1ab/0xe90 [btrfs]
btrfs_join_transaction+0x1d/0x20 [btrfs]
btrfs_finish_ordered_io+0x7bf/0x18a0 [btrfs]
? lock_repin_lock+0x400/0x400
? __kmem_cache_shutdown.cold+0x140/0x1ad
? btrfs_unlink_subvol+0x9b0/0x9b0 [btrfs]
finish_ordered_fn+0x15/0x20 [btrfs]
normal_work_helper+0x1bd/0xca0 [btrfs]
? process_one_work+0x819/0x1720
? kasan_check_read+0x11/0x20
btrfs_endio_write_helper+0x12/0x20 [btrfs]
process_one_work+0x8c9/0x1720
? pwq_dec_nr_in_flight+0x2f0/0x2f0
? worker_thread+0x1d9/0x1030
worker_thread+0x98/0x1030
kthread+0x2bb/0x3b0
? process_one_work+0x1720/0x1720
? kthread_park+0x120/0x120
ret_from_fork+0x35/0x40
Allocated by task 369692:
__kasan_kmalloc.part.0+0x44/0xc0
__kasan_kmalloc.constprop.0+0xba/0xc0
kasan_kmalloc+0x9/0x10
kmem_cache_alloc_trace+0x138/0x260
btrfs_read_tree_root+0x92/0x360 [btrfs]
btrfs_read_fs_root+0x10/0xb0 [btrfs]
create_reloc_root+0x47d/0xa10 [btrfs]
btrfs_init_reloc_root+0x1e2/0x340 [btrfs]
record_root_in_trans+0x2a0/0x370 [btrfs]
btrfs_record_root_in_trans+0xf4/0x140 [btrfs]
start_transaction+0x1ab/0xe90 [btrfs]
btrfs_start_transaction+0x1e/0x20 [btrfs]
__btrfs_prealloc_file_range+0x1c2/0xa00 [btrfs]
btrfs_prealloc_file_range+0x13/0x20 [btrfs]
prealloc_file_extent_cluster+0x29f/0x570 [btrfs]
relocate_file_extent_cluster+0x193/0xc30 [btrfs]
relocate_data_extent+0x1f8/0x490 [btrfs]
relocate_block_group+0x600/0x1060 [btrfs]
btrfs_relocate_block_group+0x3a0/0xa00 [btrfs]
btrfs_relocate_chunk+0x9e/0x180 [btrfs]
btrfs_balance+0x14e4/0x2fc0 [btrfs]
btrfs_ioctl_balance+0x47f/0x640 [btrfs]
btrfs_ioctl+0x119d/0x8380 [btrfs]
do_vfs_ioctl+0x9f5/0x1060
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x73/0xb0
do_syscall_64+0xa5/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 369692:
__kasan_slab_free+0x14f/0x210
kasan_slab_free+0xe/0x10
kfree+0xd8/0x270
btrfs_drop_snapshot+0x154c/0x1eb0 [btrfs]
clean_dirty_subvols+0x227/0x340 [btrfs]
relocate_block_group+0x972/0x1060 [btrfs]
btrfs_relocate_block_group+0x3a0/0xa00 [btrfs]
btrfs_relocate_chunk+0x9e/0x180 [btrfs]
btrfs_balance+0x14e4/0x2fc0 [btrfs]
btrfs_ioctl_balance+0x47f/0x640 [btrfs]
btrfs_ioctl+0x119d/0x8380 [btrfs]
do_vfs_ioctl+0x9f5/0x1060
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x73/0xb0
do_syscall_64+0xa5/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88856f671100
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1552 bytes inside of
4096-byte region [ffff88856f671100, ffff88856f672100)
The buggy address belongs to the page:
page:ffffea0015bd9c00 refcount:1 mapcount:0 mapping:ffff88864400e600 index:0x0 compound_mapcount: 0
flags: 0x2ffff0000010200(slab|head)
raw: 02ffff0000010200 dead000000000100 dead000000000200 ffff88864400e600
raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88856f671600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88856f671680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88856f671700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88856f671780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88856f671800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
BTRFS info (device sdi1): 1 enospc errors during balance
BTRFS info (device sdi1): balance: ended with status: -28
[CAUSE]
The problem happens when finish_ordered_io() get called with balance
still running, while the reloc root of that subvolume is already dead.
(Tree is swap already done, but tree not yet deleted for possible qgroup
usage.)
That means root->reloc_root still exists, but that reloc_root can be
under btrfs_drop_snapshot(), thus we shouldn't access it.
The following race could cause the use-after-free problem:
CPU1 | CPU2
--------------------------------------------------------------------------
| relocate_block_group()
| |- unset_reloc_control(rc)
| |- btrfs_commit_transaction()
btrfs_finish_ordered_io() | |- clean_dirty_subvols()
|- btrfs_join_transaction() | |
|- record_root_in_trans() | |
|- btrfs_init_reloc_root() | |
|- if (root->reloc_root) | |
| | |- root->reloc_root = NULL
| | |- btrfs_drop_snapshot(reloc_root);
|- reloc_root->last_trans|
= trans->transid |
^^^^^^^^^^^^^^^^^^^^^^
Use after free
[FIX]
Fix it by the following modifications:
- Test if the root has dead reloc tree before accessing root->reloc_root
If the root has BTRFS_ROOT_DEAD_RELOC_TREE, then we don't need to
create or update root->reloc_tree
- Clear the BTRFS_ROOT_DEAD_RELOC_TREE flag until we have fully dropped
reloc tree
To co-operate with above modification, so as long as
BTRFS_ROOT_DEAD_RELOC_TREE is still set, we won't try to re-create
reloc tree at record_root_in_trans().
Reported-by: Cebtenzzre <cebtenzzre@gmail.com>
Fixes: d2311e6985 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Explicitly check kvm_rebooting in kvm_spurious_fault() prior to invoking
BUG(), as opposed to assuming the caller has already done so. Letting
kvm_spurious_fault() be called "directly" will allow VMX to better
optimize its low level assembly flows.
As a happy side effect, kvm_spurious_fault() no longer needs to be
marked as a dead end since it doesn't unconditionally BUG().
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit e8bb4755eea2("KVM: selftests: Split ucall.c into architecture
specific files") selftests which use ucall on x86 started segfaulting and
apparently it's gcc to blame: it "optimizes" ucall() function throwing away
va_start/va_end part because it thinks the structure is not being used.
Previously, it couldn't do that because the there was also MMIO version and
the decision which particular implementation to use was done at runtime.
With older gccs it's possible to solve the problem by adding 'volatile'
to 'struct ucall' but at least with gcc-8.3 this trick doesn't work.
'memory' clobber seems to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Further reducing the util.c hodgepodge files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0i62zh7ok25znibyebgq0qs4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evlist__poll() from tools/perf to libperf, it will be used in
the following patches.
And rename the existing perf's function to evlist__poll().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-39-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evlist__add_pollfd() from tools/perf to libperf, it will be
used in the following patches.
Also rename perf's perf_evlist__add_pollfd()/perf_evlist__filter_pollfd()
to evlist__add_pollfd()/evlist__filter_pollfd().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-38-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evlist__alloc_pollfd() from tools/perf to libperf, it will be
used in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-37-jolsa@kernel.org
[ Added api/fd/array.h include to the lib/evlist.c file ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add libperf_init() call to the automated tests.
Committer notes:
Added missing stdarg.h and/or stdio.h to places using vfprintf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-34-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The libperf_set_print() function needs to be called in any case so let's
merge it with libperf_init(), so we have just one init function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-34-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add libperf dependency for tests targets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-36-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sys/types.h header looks more sensible, from its name we can gather
it should be there because of some needed typedef, and it is much
smaller than unistd.h, so use it and fix up the fallout in places where
it was being used for something else entirely but being obtained by
sheer luck, indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-49bn251httu22ymwgipeavmy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That was done just to have users of writen() and readn(), that before
had their prototypes in util/util.h to get it without having to add an
include for internal/lib.h, but the right way is to add it and by now
all places already do it.
Fix a fallout were readlink() was used but unistd.h was being obtained
by luck thru util.h -> internal/lib.h, now to check why unistd.h is
being included there...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lcnytgrtafey3kwlfog2rzzj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need the 'page_size' variable in libperf, so move it there.
Add a libperf_init() as a global libperf init function to obtain this
value via sysconf() at tool start.
Committer notes:
Add internal/lib.h to tools/perf/ files using 'page_size', sometimes
replacing util.h with it if that was the only reason for having util.h
included.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-33-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__id_add_fd() function to libperf as an internal
function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-32-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__id_add() function to libperf as an internal
function. We already have the 'heads' member in 'struct perf_evlist'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-31-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__read_format() function to libperf as internal
function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-30-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evlist__first()/last() functions to libperf, as internal
functions and rename perf's origins to evlist__first/last.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-29-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evsel__alloc_id()/perf_evsel__free_id() functions to libperf as
internal functions.
Move 'struct perf_sample_id' to internal/evsel.h header and change
'struct perf_sample_id::evsel' to 'struct perf_evsel' and the related
code that touches it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-28-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move 'heads' hash table from 'struct evlist' to 'struct perf_evlist'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-27-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move 'ids' from 'struct evsel' to libperf's 'struct perf_evsel'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-26-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the 'id' array from 'struct evsel' to libperf's 'struct perf_evsel'.
Committer note:
Fix the tools/perf/util/cs-etm.c build, i.e. aarch64's CoreSight.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-25-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move 'sample_id' array from 'struct evsel' to libperf's 'struct perf_evsel'.
Committer notes:
Removed the 'struct xyarray' from util/evsel.h, not needed anymore
there.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-24-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were getting it by luck, from files included before internal/evsel.h
where it is being included.
Fixes: 9dfcb75990 ("libperf: Move fd array from perf's evsel to lobperf's perf_evsel class")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lkml.kernel.org/n/tip-r8ukhxprpkflbd2k9vcc42v1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'pollfd' from 'struct evlist' to 'struct perf_evlist' it will be
used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'mmap_len' from 'struct evlist' to 'struct perf_evlist' it will
be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'nr_mmaps' from 'struct evlist' to 'struct perf_evlist', it will
be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the 'system_wide 'member from perf's evsel to libperf's perf_evsel.
Committer notes:
Added stdbool.h as we now use bool here.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
