mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 09:05:12 +07:00
b068ed6efe
4233 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Geert Uytterhoeven
|
b068ed6efe |
arm64: dts: renesas: r8a77990: Fix SPDX license identifier style
According to Documentation/process/license-rules.rst, SPDX license identifiers in DTS files should use C++ style comments. Fixes: |
||
|
Geert Uytterhoeven
|
6fffb98645 |
arm64: dts: renesas: r8a77990: ebisu: Add GPIO expander
Describe the ON Semiconductor PCA9654 I/O expander on the first I2C bus, which provides 8 extra GPIOs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Linus Torvalds
|
cf0240a755 |
This is the bulk of pin control changes for the v5.1 kernel cycle.
No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJchil8AAoJEEEQszewGV1zTCcP/AurT3InBO4nVdN9UMuoDL7P gx3SALULapc4+M1NUoRw+w+z5fvjd0gGdPXZeyhX1E9kXxLmWBmBf6tl0MO2YYPC UWbSnBaWIOOli0f4k+GKVF8LKqD0z0e/YqX4mG7UI3OLJzcJgm7OL9uXN3Gh7tIP Pa6CGbv0aRDkZpWUD2ZTpSPCRYGT57roVq//d7V7s+0lveS97pQuMv43YlS5L2my JOOhHNG33bgi4lS/ZOP81G16oOrVaoupXuX7E+AvgG6vxr5965Fi+qoGLkxIuYOm jtrzuNY98eL2m9b505VYdNmD7ouBhG6CKFb4njpOvjkkqNUXOaGV53wlEuEYRUNz bsp0596+dlOcW7wl11r6YI4Kyn2wQJFql1AwS8A4dEtbuboGrDy16N3adr1SkIGZ 4ESN8xydcC7CAgUGXks+AgDj9vYwOs4apylJDW5tMk4K0LIsEYsDkbNeS9hwDYIH ZlbQe9N2loB6qQbX3c3D3/sIhKj2VB4elONSwOW10M8OJdJwp8h44UyMZ3TIEHIT 7Gu9pw5vobXbccKCSjqkYYflaHMmjwZUtLqDZws818sbe/xgDxONbRqloZCLV39Y kmwRGbbE5WtNAM0X+ABwMG3Lm77wxCFKCjJwLHH79qqt4kSBynEKXQ4D/coG/Hln 6idanzKEPiIBJ+6QLdbQ =EfXK -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is a calm cycle, not much happened this time around: not even much incremental development. Some three new drivers, that is all. No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements" * tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits) pinctrl: imx: fix scu link errors dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding pinctrl: qcom: spmi-gpio: Reorder debug print pinctrl: nomadik: fix possible object reference leak pinctrl: stm32: return error upon hwspinlock failure pinctrl: stm32: fix memory leak issue pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions pinctrl: sh-pfc: Validate fixed-size field widths at build time pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group pinctrl: sh-pfc: emev2: Add missing pinmux functions pinctrl: sunxi: Support I/O bias voltage setting on A80 pinctrl: ingenic: Add LCD pins for the JZ4725B SoC pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl pinctrl: bcm2835: declare pin config as generic pinctrl: qcom: qcs404: Drop unused UFS_RESET macro dt-bindings: add documentation for slew rate ... |
||
|
Linus Torvalds
|
2901752c14 |
pci-v5.1-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlyCpL0UHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vzoHw//ZyFbwekF0mV3RZwcV35LkScIOw0d O1DgjJo8UbuV51+/foQeUZ8IzjHlybQhoFdJupPuw+LyaDUkwqjAmdtY8J/FjWSm AJeVzu6gMF0Z9kwwGO4NyqX2EWluTD0xNLgf8g+fe3p1MtEuH6VCrqe+hk3wma0K CrSIKWY/sO408SpAaWiLTEZmVT+hXiP9hJw1qTrbqKLtyWa4oCjErdoyUDsA01+5 gPndKC/3pu6q6q9Dd94582HuQaE2dKHWQXx6Fzd/tdCyYffpbOUAUNP3aRXaTKrS MwKxOF3y7yUnz5RbxRgopwNVf5WyXhCnnPZRLaSxqnTSZCY6FCUi3l6RpVyWu2Ha iztBbkTP/x6WV3VWg810qgQKQ9wl8oALMkoOfR6lWCR7MTuJnMXJtbrz0jWpEC2O ZPwK9fAxFj2/3e13hx88O7Ek8kfajTPM8T15K79pvpljfqa0BD9SrhPyQ5ssmxj4 idz4yIFCATULKszPXA1QbfC1/xCDveQOEPSerL3eACXsLN17vfpOwOT9vWJm6bpr 6u5ggM2dEA07eI1ANnY6twn5g0kSYU9qISNQO98tA86IvaCnME0Z+k+SCwUNIM9U ep9k0NdAGDNsYOfdVEEY0fYGT9k+9f9w8AfZLNvh0N3s7mGQQ35jf0Z75jj/jsor cbMcPAN2jOCyFVs= =vf9L -----END PGP SIGNATURE----- Merge tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Use match_string() instead of reimplementing it (Andy Shevchenko) - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada) - Use Latency Tolerance Reporting if already enabled by platform (Bjorn Helgaas) - Save/restore LTR info for suspend/resume (Bjorn Helgaas) - Fix DPC use of uninitialized data (Dongdong Liu) - Probe bridge window attributes only once at enumeration-time to fix device accesses during rescan (Bjorn Helgaas) - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du Changbin) - Use config header type (not class code) identify bridges more reliably (Honghui Zhang) - Work around Intel Denverton incorrect Trace Hub BAR size reporting (Alexander Shishkin) - Reorder pciehp cached state/hardware state updates to avoid missed interrupts (Mika Westerberg) - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann) - Mark expected switch fall-through (Mathieu Malaterre) - Use of_node_name_eq() for node name comparisons (Rob Herring) - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang) - Consolidate Rohm Vendor ID definitions (Andy Shevchenko) - Use u32 (not __u32) for things not exposed to userspace (Logan Gunthorpe) - Fix locking semantics of bus and slot reset interfaces (Alex Williamson) - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang) - Allow portdrv to claim subtractive decode Ports so PCIe services will work for them (Honghui Zhang) - Report PCIe links that become degraded at run-time (Alexandru Gagniuc) - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt hotplug (Mika Westerberg) - Revert runtime PM suspend/resume callbacks that broke PME on network cable plug (Mika Westerberg) - Disable Data Link State Changed interrupts to prevent wakeup immediately after suspend (Mika Westerberg) - Extend altera to support Stratix 10 (Ley Foon Tan) - Allow building altera driver on ARM64 (Ley Foon Tan) - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint maintainer (Lorenzo Pieralisi) - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro) - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I) - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay Abraham I) - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I) - Simplify dwc (remove unnecessary header includes, name variables consistently, reduce inverted logic, etc) (Gustavo Pimentel) - Add i.MX8MQ support (Andrey Smirnov) - Add message to help debug dwc MSI-X mask bit errors (Gustavo Pimentel) - Work around imx7d PCIe PLL erratum (Trent Piepho) - Don't assert qcom reset GPIO during probe (Bjorn Andersson) - Skip dwc MSI init if MSIs have been disabled (Lucas Stach) - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI endpoint framework (Wen Yang) - Add interface to discover supported endpoint features to replace a bitfield that wasn't flexible enough (Kishon Vijay Abraham I) - Implement the new supported-feature interface for designware-plat, dra7xx, rockchip, cadence (Kishon Vijay Abraham I) - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I) - Add layerscape endpoint mode support (Xiaowei Bao) - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya Nakamura) - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of open-coded reimplementation (Maya Nakamura) - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura) - Fix mediatek MMIO size computation to enable full size of available MMIO space (Honghui Zhang) - Fix mediatek DMA window size computation to allow endpoint DMA access to full DRAM address range (Honghui Zhang) - Fix mvebu prefetchable BAR regression caused by common bridge emulation that assumed all bridges had prefetchable windows (Thomas Petazzoni) - Make advk_pci_bridge_emul_ops static (Wei Yongjun) - Configure MPS settings for VMD root ports (Jon Derrick) * tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits) PCI: Update PCIEPORTBUS Kconfig help text PCI: Fix "try" semantics of bus and slot reset PCI/LINK: Report degraded links via link bandwidth notification dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 PCI: altera: Enable driver on ARM64 PCI: altera: Add Stratix 10 PCIe support PCI/PME: Fix possible use-after-free on remove PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static PCI: dwc: skip MSI init if MSIs have been explicitly disabled PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset() PCI: hv: Replace hv_vp_set with hv_vpset PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM PCI: mediatek: Fix memory mapped IO range size computation PCI: dwc: Remove superfluous shifting in definitions PCI: dwc: Make use of GENMASK/FIELD_PREP PCI: dwc: Make use of BIT() in constant definitions PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() PCI: dwc: Make use of IS_ALIGNED() PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ ... |
||
|
Linus Torvalds
|
3601fe43e8 |
This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in
the qualcomm pin controllers, closely coupled with the
gpiochip. This rework, in a classic fall-between-the-chairs
fashion has been sidestepped for too long. The Qualcomm
IRQchips using the SPMI and SSBI transport mechanisms have
been rewritten to use hierarchical irqchip. This creates
the base from which I intend to gradually pull support for
hierarchical irqchips into the gpiolib irqchip helpers to
cut down on duplicate code. We have too many hacks in the
kernel because people have been working around the missing
hierarchical irqchip for years, and once it was there,
noone understood it for a while. We are now slowly adapting
to using it. This is why this pull requests include changes
to MFD, SPMI, IRQchip core and some ARM Device Trees
pertaining to the Qualcomm chip family. Since Qualcomm have
so many chips and such large deployments it is paramount
that this platform gets this right, and now it (hopefully)
does.
- Core support for pull-up and pull-down configuration, also
from the device tree. When a simple GPIO chip support a
"off or on" pull-up or pull-down resistor, we provide a
way to set this up using machine descriptors or device tree.
If more elaborate control of pull up/down (such as
resistance shunt setting) is required, drivers should be
phased over to use pin control. We do not yet provide a
userspace ABI for this pull up-down setting but I suspect
the makers are going to ask for it soon enough. PCA953x
is the first user of this new API.
- The GPIO mockup driver has been revamped after some
discussion improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for
both testing and virtual prototyping, e.g. when you do
not yet have a GPIO expander to play with but really
want to get something to develop code around before
hardware is available. It's neat. The blackbox testing
usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating
flags.
- A new device core helper for devm_platform_ioremap_resource()
is funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped
I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum
driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers.
-----BEGIN PGP SIGNATURE-----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=VoVC
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in the
qualcomm pin controllers, closely coupled with the gpiochip. This
rework, in a classic fall-between-the-chairs fashion has been
sidestepped for too long.
The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
have been rewritten to use hierarchical irqchip. This creates the
base from which I intend to gradually pull support for hierarchical
irqchips into the gpiolib irqchip helpers to cut down on duplicate
code.
We have too many hacks in the kernel because people have been
working around the missing hierarchical irqchip for years, and once
it was there, noone understood it for a while. We are now slowly
adapting to using it.
This is why this pull requests include changes to MFD, SPMI,
IRQchip core and some ARM Device Trees pertaining to the Qualcomm
chip family. Since Qualcomm have so many chips and such large
deployments it is paramount that this platform gets this right, and
now it (hopefully) does.
- Core support for pull-up and pull-down configuration, also from the
device tree. When a simple GPIO chip supports an "off or on" pull-up
or pull-down resistor, we provide a way to set this up using
machine descriptors or device tree.
If more elaborate control of pull up/down (such as resistance shunt
setting) is required, drivers should be phased over to use pin
control. We do not yet provide a userspace ABI for this pull
up-down setting but I suspect the makers are going to ask for it
soon enough. PCA953x is the first user of this new API.
- The GPIO mockup driver has been revamped after some discussion
improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for both testing
and virtual prototyping, e.g. when you do not yet have a GPIO
expander to play with but really want to get something to develop
code around before hardware is available. It's neat. The blackbox
testing usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating flags.
- A new device core helper for devm_platform_ioremap_resource() is
funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers"
* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
gpio: gpio-omap: fix level interrupt idling
gpio: amd-fch: Set proper output level for direction_output
x86: apuv2: remove unused variable
gpio: pca953x: Use PCA_LATCH_INT
platform/x86: fix PCENGINES_APU2 Kconfig warning
gpio: pca953x: Fix dereference of irq data in shutdown
gpio: amd-fch: Fix type error found by sparse
gpio: amd-fch: Drop const from resource
gpio: mxc: add check to return defer probe if clock tree NOT ready
gpio: ftgpio: Register per-instance irqchip
gpio: ixp4xx: Add DT bindings
x86: pcengines apuv2 gpio/leds/keys platform driver
gpio: AMD G-Series PCH gpio driver
drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
gpio: tqmx86: Set proper output level for direction_output
gpio: sprd: Change to use SoC compatible string
gpio: sprd: Use SoC compatible string instead of wildcard string
gpio: of: Handle both enable-gpio{,s}
gpio: of: Restrict enable-gpio quirk to regulator-gpio
gpio: davinci: use devm_platform_ioremap_resource()
...
|
||
|
Linus Torvalds
|
da2577fe63 |
sound updates for 5.1
We had again a busy development cycle with many new drivers as well as
lots of core improvements / cleanups. Let's go for highlights:
ALSA core:
- PCM locking scheme was refactored for reducing a global rwlock
- PCM suspend is handled in the device type PM ops now; lots of
explicit calls were reduced by this action
- Cleanups about PCM buffer preallocation calls
- Kill NULL device object in memory allocations
- Lots of procfs API cleanups
ASoC core:
- Support for only powering up channels that are actively being used
- Cleanups / fixes of topology API
ASoC drivers:
- MediaTek BTCVSD for a Bluetooth radio chip, which is the first such
driver we've had upstream!
- Quite a few improvements to simplify the generic card drivers,
especially the merge of the SCU cards into the main generic drivers
- Lots of fixes for probing on Intel systems to follow more standard
styles
- A big refresh and cleanup of the Samsung drivers
- New drivers: Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341
and CS35L26, Google ChromeOS embedded controllers, Ingenic JZ4725B,
MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328,
Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM
formatters
ALSA drivers:
- Improvements of Tegra HD-audio controller driver for supporting new
chips
- HD-audio codec quirks for ALC294 S4 resume, ASUS laptop, Chrome
headset button support and Dell workstations
- Improved DSD support on USB-audio
- Quirk for MOTU MicroBook II USB-audio
- Support for Fireface UCX support and Solid State Logic Duende
Classic/Mini
-----BEGIN PGP SIGNATURE-----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=Vh8O
-----END PGP SIGNATURE-----
Merge tag 'sound-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We had again a busy development cycle with many new drivers as well as
lots of core improvements / cleanups. Let's go for highlights:
ALSA core:
- PCM locking scheme was refactored for reducing a global rwlock
- PCM suspend is handled in the device type PM ops now; lots of
explicit calls were reduced by this action
- Cleanups about PCM buffer preallocation calls
- Kill NULL device object in memory allocations
- Lots of procfs API cleanups
ASoC core:
- Support for only powering up channels that are actively being used
- Cleanups / fixes of topology API
ASoC drivers:
- MediaTek BTCVSD for a Bluetooth radio chip, which is the first such
driver we've had upstream!
- Quite a few improvements to simplify the generic card drivers,
especially the merge of the SCU cards into the main generic drivers
- Lots of fixes for probing on Intel systems to follow more standard
styles
- A big refresh and cleanup of the Samsung drivers
- New drivers: Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341
and CS35L26, Google ChromeOS embedded controllers, Ingenic JZ4725B,
MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328,
Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM
formatters
ALSA drivers:
- Improvements of Tegra HD-audio controller driver for supporting new
chips
- HD-audio codec quirks for ALC294 S4 resume, ASUS laptop, Chrome
headset button support and Dell workstations
- Improved DSD support on USB-audio
- Quirk for MOTU MicroBook II USB-audio
- Support for Fireface UCX support and Solid State Logic Duende
Classic/Mini"
* tag 'sound-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (461 commits)
ALSA: usb-audio: Add quirk for MOTU MicroBook II
ASoC: stm32: i2s: skip useless write in slave mode
ASoC: stm32: i2s: fix race condition in irq handler
ASoC: stm32: i2s: remove useless callback
ASoC: stm32: i2s: fix dma configuration
ASoC: stm32: i2s: fix stream count management
ASoC: stm32: i2s: fix 16 bit format support
ASoC: stm32: i2s: fix IRQ clearing
ASoC: qcom: Kconfig: fix dependency for sdm845
ASoC: Intel: Boards: Add Maxim98373 support
ASoC: rsnd: gen: fix SSI9 4/5/6/7 busif related register address
ALSA: firewire-motu: fix construction of PCM frame for capture direction
ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56
ALSA: hda: Extend i915 component bind timeout
ASoC: wm_adsp: Improve logging messages
ASoC: wm_adsp: Add support for multiple compressed buffers
ASoC: wm_adsp: Refactor compress stream initialisation
ASoC: wm_adsp: Reorder some functions for improved clarity
ASoC: wm_adsp: Factor out stripping padding from ADSP data
ASoC: cs35l36: Fix an IS_ERR() vs NULL checking bug
...
|
||
|
Linus Torvalds
|
64b1b217f1 |
ARM: New SoC family support
Two new SoC families are added this time. Sugaya Taichi submitted support for the Milbeaut SoC family from Socionext and explains: "SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for computer vision. It also features advanced functionalities such as 360-degree, real-time spherical stitching with multi cameras, image stabilization for without mechanical gimbals, and rolling shutter correction. More detail is below: https://www.socionext.com/en/products/assp/milbeaut/SC2000.html" Interestingly, this one has a history dating back to older chips made by Socionext and previously Matsushita/Panasonic based on their own mn10300 CPU architecture that was removed from the kernel last year. Manivannan Sadhasivam adds support for another SoC family, this is the Bitmain BM1880 chip used in the Sophon Edge TPU developer board. The chip is intended for Deep Learning applications, and comes with dual-core Arm Cortex-A53 to run Linux as well as a RISC-V microcontroller core to control the tensor unit. For the moment, the TPU is not accessible in mainline Linux, so we treat it as a generic Arm SoC. More information is available at https://www.sophon.ai/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJcf9USAAoJEGCrR//JCVIn8M8P/1+wpy+9PZynYOqIZvTAR0Pr wqZD20FIjzbEMBpbSMWpOSxg+KbSuf+K1s+1lF6hAGry5UW8CVgZ7DMQ2DyBZfzN NEcJ1MfchN1AblpD4L76C7PzLR4ZbmNHmXaGX5KQ3ItXFX50TI+PBNdlRMho1y2P NGD8SLD1K+erfGyx6CHY+Wf6el25I7tP739HZGvZfMR1SDSKp73fwbjmBBg8vg7/ 2kIwjU7msgtIh4xAgNnZ7+uNUovi04ibDpQnOMta4Urdc9WBJPVQrTmrNJU0loJr bffhrrK4adZgp40gtjajCqPR6F96shyZ2G7nYxe53FGE4whSsMCZuGb5aXJ9OtZq ez0w3Vy16+2uLLA55xVGgcsOv/4pwXnxuVnfw4D5lonU8Q5bbh5pBTVnvV6lFOea IOLaEcfwBCLKMAkZ//eHn9PIGg3RBko4MZniJwb+WLbHXWR+MriQ4+Pb+cvugOAo ky4I9iU/XAmUfJxVC1ShHZrzgz2kEoZXCsX0yqXR1eG4o1Ztbftrs4UOyvTxeqxl lvLXg3b0SDA5QBwQHUxL0G9HTqm4LdMs3lg98kI05gWofz6Bmk1aEi7U4uguhGKf KafuUZ6snVF5KGJAI745Q4IkLKelxjBymLEi+FVKk6y0KAejQXuSMpgXwC1SnIN3 M69uqcDP+ICqCgDbwWCx =HQS8 -----END PGP SIGNATURE----- Merge tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM new SoC family support from Arnd Bergmann: "Two new SoC families are added this time. Sugaya Taichi submitted support for the Milbeaut SoC family from Socionext and explains: "SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for computer vision. It also features advanced functionalities such as 360-degree, real-time spherical stitching with multi cameras, image stabilization for without mechanical gimbals, and rolling shutter correction. More detail is below: https://www.socionext.com/en/products/assp/milbeaut/SC2000.html" Interestingly, this one has a history dating back to older chips made by Socionext and previously Matsushita/Panasonic based on their own mn10300 CPU architecture that was removed from the kernel last year. Manivannan Sadhasivam adds support for another SoC family, this is the Bitmain BM1880 chip used in the Sophon Edge TPU developer board. The chip is intended for Deep Learning applications, and comes with dual-core Arm Cortex-A53 to run Linux as well as a RISC-V microcontroller core to control the tensor unit. For the moment, the TPU is not accessible in mainline Linux, so we treat it as a generic Arm SoC. More information is available at https://www.sophon.ai/" * tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V ARM: configs: Add Milbeaut M10V defconfig ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs dt-bindings: timer: Add Milbeaut M10V timer description ARM: milbeaut: Add basic support for Milbeaut m10v SoC dt-bindings: Add documentation for Milbeaut SoCs dt-bindings: arm: Add SMP enable-method for Milbeaut dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram MAINTAINERS: Add entry for Bitmain SoC platform arm64: dts: bitmain: Add Sophon Egde board support arm64: dts: bitmain: Add BM1880 SoC support arm64: Add ARCH_BITMAIN platform dt-bindings: arm: Document Bitmain BM1880 SoC |
||
|
Linus Torvalds
|
6ad63dec9c |
ARM: SoC device tree updates for 5.1
This is a smaller update than the past few times, but with just over
500 non-merge changesets still dwarfes the rest of the SoC tree.
Three new SoC platforms get added, each one a follow-up to an existing
product, and added here in combination with a reference platform:
- Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html
- Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for
Rich Graphics Applications".
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html
- NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC
https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X
These are actual commercial products we now support with an in-kernel
device tree source file:
- Bosch Guardian is a product made by Bosch Power
Tools GmbH, based on the Texas Instruments AM335x chip
- Winterland IceBoard is a Texas Instruments AM3874 based
machine used in telescopes at the south pole and elsewhere, see commit
|
||
|
Linus Torvalds
|
6456300356 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Here we go, another merge window full of networking and #ebpf changes:
1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
range without dealing with floods of ARP traffic, from Linus
Lüssing.
2) Throttle buffered multicast packet transmission in mt76, from
Felix Fietkau.
3) Support adaptive interrupt moderation in ice, from Brett Creeley.
4) A lot of struct_size conversions, from Gustavo A. R. Silva.
5) Add peek/push/pop commands to bpftool, as well as bash completion,
from Stanislav Fomichev.
6) Optimize sk_msg_clone(), from Vakul Garg.
7) Add SO_BINDTOIFINDEX, from David Herrmann.
8) Be more conservative with local resends due to local congestion,
from Yuchung Cheng.
9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.
10) Add health buffer support to devlink, from Eran Ben Elisha.
11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.
12) Add statistics to basic packet scheduler filter, from Cong Wang.
13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.
14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.
15) Add 3ad stats to bonding, from Nikolay Aleksandrov.
16) Lots of probing improvements for bpftool, from Quentin Monnet.
17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.
18) Allow #ebpf programs to access gso_segs from skb shared info, from
Eric Dumazet.
19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.
20) Support 22260 iwlwifi devices, from Luca Coelho.
21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.
22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.
23) Add spinlock support to #ebpf, from Alexei Starovoitov.
24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.
25) Add device infomation API to devlink, from Jakub Kicinski.
26) Add new timestamping socket options which are y2038 safe, from
Deepa Dinamani.
27) Add RX checksum offloading for various sh_eth chips, from Sergei
Shtylyov.
28) Flow offload infrastructure, from Pablo Neira Ayuso.
29) Numerous cleanups, improvements, and bug fixes to the PHY layer
and many drivers from Heiner Kallweit.
30) Lots of changes to try and make packet scheduler classifiers run
lockless as much as possible, from Vlad Buslov.
31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.
32) Add concurrency tests to tc-tests infrastructure, from Vlad
Buslov.
33) Add hwmon support to aquantia, from Heiner Kallweit.
34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.
And I would be remiss if I didn't thank the various major networking
subsystem maintainers for integrating much of this work before I even
saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
Johannes Berg, Kalle Valo, and many others. Thank you!"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
net/sched: avoid unused-label warning
net: ignore sysctl_devconf_inherit_init_net without SYSCTL
phy: mdio-mux: fix Kconfig dependencies
net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
selftest/net: Remove duplicate header
sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
net/mlx5e: Update tx reporter status in case channels were successfully opened
devlink: Add support for direct reporter health state update
devlink: Update reporter state to error even if recover aborted
sctp: call iov_iter_revert() after sending ABORT
team: Free BPF filter when unregistering netdev
ip6mr: Do not call __IP6_INC_STATS() from preemptible context
isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
cxgb4/chtls: Prefix adapter flags with CXGB4
net-sysfs: Switch to bitmap_zalloc()
mellanox: Switch to bitmap_zalloc()
bpf: add test cases for non-pointer sanitiation logic
mlxsw: i2c: Extend initialization by querying resources data
...
|
||
|
David S. Miller
|
2369afb669 |
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says: ==================== pull request: bluetooth-next 2019-03-02 Here's one more bluetooth-next pull request for the 5.1 kernel: - Added support for MediaTek MT7663U and MT7668U UART devices - Cleanups & fixes to the hci_qca driver - Fixed wakeup pin behavior for QCA6174A controller Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Claudiu Manoil
|
0c805404f0 |
arm64: dts: fsl: ls1028a-rdb: Add ENETC external eth ports for the LS1028A RDB board
The LS1028A RDB board features an Atheros PHY connected over SGMII to the ENETC PF0 (or Port0). ENETC Port1 (PF1) has no external connection on this board, so it can be disabled for now. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Claudiu Manoil
|
927d7f8575 |
arm64: dts: fsl: ls1028a: Add PCI IERC node and ENETC endpoints
The LS1028A SoC features a PCI Integrated Endpoint Root Complex (IERC) defining several integrated PCI devices, including the ENETC ethernet controller integrated endpoints (IEPs). The IERC implements ECAM (Enhanced Configuration Access Mechanism) to provide access to the PCIe config space of the IEPs. This means the the IEPs (including ENETC) do not support the standard PCIe BARs, instead the Enhanced Allocation (EA) capability structures in the ECAM space are used to fix the base addresses in the system, and the PCI subsystem uses these structures for device enumeration and discovery. The "ranges" entries contain basic information from these EA capabily structures required by the kernel for device enumeration. The current patch also enables the first 2 ENETC PFs (Physiscal Functions) and the associated VFs (Virtual Functions), 2 VFs for each PF. Each of these ENETC PFs has an external ethernet port on the LS1028A SoC. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Arnd Bergmann
|
6089e65618 |
Qualcomm ARM64 Fixes for 5.0-rc8
* Fix TZ memory area size to avoid crashes during boot -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcdiEpAAoJEFKiBbHx2RXVQLAP/i9ZU6p6TD8KVYVnxbec5pIz bB6/gNo0VfM4/4CZmznJ0FQcGbxGekaMSCtNJDlgfzIM/VC2nXdlPzZi/Lo8tubX NgP4KYVccqnyA7Ppb/7lMaITsclljofdSaGVX4Vj4o60DzrEkA8reauJ4a+X8GDF d0kh006/Q0aRD9rrIV9ZaRWE8mzThbuCwMDZt6iV5kUDGKK1qleJV7wkBlSYKMTg rB+9ObD02kZxw7FWNcf0LH/4Ans9coPkM6I0CE4MCH5ozEDg+AN7RRXTkeniXYdi kljx2BilgN0SyV9zuGLwYW/FRXcMOV1Rmmdw2CUU84wNnnTkcLG0O43fqR8S8nBb cF0Wd9zPHlXWhIKa5twgFubvluZjsaFOciThixtAELwU4wrxq9h5NUxW3XnYQVUO riEIPUIBl8e3wY2SHk0HUBvHUcXr8m033V0oKN5tIO69OuWRROMBCNp0Su6JraSs 7hC2wWvo+wtqQIC3JHszSRyfA1ceF7ldYit5dRLJPycMk49fgzXF+Coel7W0ifV5 PV62/1SQXkajeRywdamFCT6ccdRQcqVzKSUrQdD0U0+Z5hC4BjgK9TOMHSak6YEY iKt4PwpdE6zdenybmflUw7wcmdt2plrYHGJYLelFE3TKZMhV1x33LtNeb2FPXSZo u/RxwNuDNdyw9kGUk1+u =iA1y -----END PGP SIGNATURE----- Merge tag 'qcom-fixes-for-5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/fixes Qualcomm ARM64 Fixes for 5.0-rc8 * Fix TZ memory area size to avoid crashes during boot * tag 'qcom-fixes-for-5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: qcom: msm8998: Extend TZ reserved memory area |
||
|
Takashi Iwai
|
70395a96bd |
ASoC: More changes for v5.1
Another batch of changes for ASoC, no big core changes - it's mainly
small fixes and improvements for individual drivers.
- A big refresh and cleanup of the Samsung drivers, fixing a number of
issues which allow the driver to be used with a wider range of
userspaces.
- Fixes for the Intel drivers to make them more standard so less likely
to get bitten by core issues.
- New driver for Cirrus Logic CS35L26.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlx3z7ETHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0H5QB/9jwKEwOdk6ynoFUpQwXPPkQl7CGkIh
P8J3OMTt+U4FNOrVG2S7xgUl69ZoaLm9rS/PHVrMV5krSLqY//2CTvF068qDBBlj
haBxgeRbe4pwLZPfFUnWvn6v1rdvNCXzDG/be9jGPJjDcm6wK44VJQWkPbqTsh6O
ZORqvKn48D89W0DegG1B+4jvbietPkhA0+nHQXwsWZ+sfMcEV/AWWsE5FIQ7ucCC
bundBBncUFKMMp9whuhj2W9FO62LUd8OAM7ejis3hfKk9MsQWUy6vrcN1XgRCq47
4I0doB5o+WhsOGMTZMcuhFISCVaCDqbNqGuVbeK0sdonjc1xz0682jLo
=9rq8
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: More changes for v5.1
Another batch of changes for ASoC, no big core changes - it's mainly
small fixes and improvements for individual drivers.
- A big refresh and cleanup of the Samsung drivers, fixing a number of
issues which allow the driver to be used with a wider range of
userspaces.
- Fixes for the Intel drivers to make them more standard so less likely
to get bitten by core issues.
- New driver for Cirrus Logic CS35L26.
|
||
|
Brian Norris
|
5364a0b4f4 |
arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node
Currently, we don't coordinate BT USB activity with our handling of the BT out-of-band wake pin, and instead just use gpio-keys. That causes problems because we have no way of distinguishing wake activity due to a BT device (e.g., mouse) vs. the BT controller (e.g., re-configuring wake mask before suspend). This can cause spurious wake events just because we, for instance, try to reconfigure the host controller's event mask before suspending. We can avoid these synchronization problems by handling the BT wake pin directly in the btusb driver -- for all activity up until BT controller suspend(), we simply listen to normal USB activity (e.g., to know the difference between device and host activity); once we're really ready to suspend the host controller, there should be no more host activity, and only *then* do we unmask the GPIO interrupt. This is already supported by btusb; we just need to describe the wake pin in the right node. We list 2 compatible properties, since both PID/VID pairs show up on Scarlet devices, and they're both essentially identical QCA6174A-based modules. Also note that the polarity was wrong before: Qualcomm implemented WAKE as active high, not active low. We only got away with this because gpio-keys always reconfigured us as bi-directional edge-triggered. Finally, we have an external pull-up and a level-shifter on this line (we didn't notice Qualcomm's polarity in the initial design), so we can't do pull-down. Switch to pull-none. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> |
||
|
Marc Gonzalez
|
6e53330909 |
arm64: dts: qcom: msm8998: Extend TZ reserved memory area
My console locks up as soon as Linux writes to [88800000,88f00000[
AFAIU, that memory area is reserved for trustzone.
Extend TZ reserved memory range, to prevent Linux from stepping on
trustzone's toes.
Cc: stable@vger.kernel.org # 4.20+
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Fixes:
|
||
|
Arnd Bergmann
|
2f8b1ce19e |
mvebu fixes for 5.0 (part 2)
Fix PHY reset signal on clearfog gt 8K (Armada 8040 based) Fix NAND description on Armada XP boards which was broken since a few release -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXG/EtQAKCRALBhiOFHI7 1VPDAJ9DSFQaCmlSRwC/jO1HvchB+y9sxACcDQioH28bCYQt3SYp7K87D1ow8wE= =b5Ed -----END PGP SIGNATURE----- Merge tag 'mvebu-fixes-5.0-2' of git://git.infradead.org/linux-mvebu into arm/fixes mvebu fixes for 5.0 (part 2) Fix PHY reset signal on clearfog gt 8K (Armada 8040 based) Fix NAND description on Armada XP boards which was broken since a few release * tag 'mvebu-fixes-5.0-2' of git://git.infradead.org/linux-mvebu: arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal ARM: dts: armada-xp: fix Armada XP boards NAND description Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Sameer Pujar
|
11ce430830 |
arm64: tegra: custom name for hda sound card
"nvidia,model" property is added to pass custom name for hda sound card. This is parsed in hda driver and used for card name. This aligns with the way with which sound cards are named in general. This patch populates above for jetson-tx1, jetson-tx2 and jetson-xavier. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Xiaowei Bao
|
7b9d3d11c0 |
arm64: dts: Add the PCIE EP node in dts
Add the PCIE EP node in dts for ls1046a. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com> Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com> Reviewed-by: Rob Herring <robh+dt@kernel.org> |
||
|
Arnd Bergmann
|
94224c2517 |
Actions ARM64 DT changes for v5.1:
- Add interrupt properties to S900 pinctrl node - Add Reset controller support for S700 - Add Reset controller support for S900 - Add pinctrl support for S700 - Add I2C support for S700 - Enable I2C0 and I2C1 for s700-cubieboard7 -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAlxnwSoACgkQVZ8R5v6R zvXpeAf+NwhGUPtKeKeXOct24HqHVwvdbyBajcqcsUYsGXTxaIH7uGEupITAkxAj 6kLOpmW3WDpMr2yBHSS5oEnityD2VKCL1BLP9TE7Plj56QsWucWlWsY2xhG1828+ eT1pbSPECg7lRZnAOMj+B6EqtEcZzaoxlRdRLw6rJmb4+H5aJ80VT3pIpYI+sjR9 5wnuaWSE2nxJoICm1dL1CeVPfT9iNluYSxerO13tkF9/lj7bQpeRI85OMvpUVo5Z iQ6OGJ6sc4Ynn0Z9F7hdBOb6tB8Z3ampXu8IMiXir1d+RG/uGNlhsQyGsgXGZ++Y uQQR4as0k+vYYscRR2J0sLhhBT4h2w== =EHRP -----END PGP SIGNATURE----- Merge tag 'actions-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt Actions ARM64 DT changes for v5.1: - Add interrupt properties to S900 pinctrl node - Add Reset controller support for S700 - Add Reset controller support for S900 - Add pinctrl support for S700 - Add I2C support for S700 - Enable I2C0 and I2C1 for s700-cubieboard7 * tag 'actions-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1 arm64: dts: actions: s700: Add I2C controller nodes arm64: dts: actions: Add pinctrl node for Actions Semi S700 arm64: dts: actions: Add Reset Controller support for S900 SoC arm64: dts: actions: Add Reset Controller support for S700 SoC arm64: dts: actions: Add interrupt properties to pinctrl node for S900 Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Baruch Siach
|
bdd22a41d5 |
arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal
The PHY reset signal goes to mpp43 on CP0.
Fixes:
|
||
|
Baolin Wang
|
0419a75b18 |
arm64: dts: sprd: Remove wildcard compatible string
Remove wildcard compatible string. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Baolin Wang
|
02643475a8 |
arm64: dts: sprd: Add SC27XX fuel gauge device
Add Spreadtrum SC27XX fuel gauge device node to calculate the battery capacity. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Baolin Wang
|
a479540953 |
arm64: dts: sprd: Add SC2731 charger device
Add charger device node and related battery node for SC2731 PMIC. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Baolin Wang
|
640e2c51bd |
arm64: dts: sprd: Add ADC calibration support
This patch adds phandles to the calibration cells provided by the Efuse device, which is used to calibrate the ADC channel scales. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Baolin Wang
|
5863dbe071 |
arm64: dts: sprd: Remove PMIC INTC irq trigger type
The Spreadtrum PMIC INTC controller has no registers to set trigger type, since it is always high level trigger as default. So remove its child devices' irq trigger type setting and change #interrupt-cells to 1. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
e88dc153ee |
rockpro64 regulator improvements, rock960 improvements (tsadc, wifi, hdmi
audio), nanopi4 bluetooth support and rk3328-roc-cc gmac improvement. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlxp6CQQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgciAB/kB5WJ/g/DRE4m5EJnpcmUSPLEsk68AwnEf jgcYOjdV4p9kwxWo4RpeYeDUcyDGqde8bOXyARFuu3G1pvQdNc/MFcse/jpr0B+J LnwgZvZttzlFrm+6DOJqNb7Ct6YAK4N/lFgPEIrLlV6wZ3vxadDnOV4ItubOplqa FkX3Fw11PSQChAAxXrUSjkLNYUt+Ht6K8YldlAhREQP2L/y9JXpqDG9GKdnWo63i QmZSjTSB1/lA5VT5hxeV4eOm+igaqs8CACcH0hZebet818JLAoHxRTXRpw2POuvK AV3IVigXsc02/gBtmDtzfYnVaGRjc3EcobgjsWyFFZKmmL9e7GUb =TXrh -----END PGP SIGNATURE----- Merge tag 'v5.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt rockpro64 regulator improvements, rock960 improvements (tsadc, wifi, hdmi audio), nanopi4 bluetooth support and rk3328-roc-cc gmac improvement. * tag 'v5.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Enable tsadc device on rock960 arm64: dts: rockchip: Add on-board WiFi/BT support for Rock960 boards arm64: dts: rockchip: fix rk3328-roc-cc gmac2io stability issues arm64: dts: rockchip: rockpro64 dts add usb regulator arm64: dts: rockchip: rockpro64 dts remove unused lcd-reset pinmux arm64: dts: rockchip: rockpro64 dts make regulator more readable arm64: dts: rockchip: Add nanopi4 bluetooth arm64: dts: rockchip: enable mali power supply on rk3399-rockpro64 arm64: dts: rockchip: Enable HDMI audio devices on rk3399-rock960 Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ezequiel Garcia
|
02260a619e |
arm64: dts: rockchip: Enable tsadc device on rock960
Enable the thermal sensor. This device also provides temperature shutdown protection. The shutdown value is set at 110C, as tested by the vendor. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Linus Walleij
|
8fab3d713c |
gpio updates for v5.1
- support for a new variant of pca953x - documentation fix from Wolfram - some tegra186 name changes - two minor fixes for madera and altera-a10sr -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAlxleLcACgkQEacuoBRx 13I45Q//YMGUYzkMjOL+lp2DYnnVhVNqrF4hoLjinWVrnhZ6gqu88RgV2Cea4Pta oxVxnSsE8LK7kY8VZ8tcBmIqLLkQAJdSVtqkeSoZF2vhWBAbE9ZaSOYb17SIkSXK Ok16lZgZ+ZWOM5EjEvuRpB/qYGjX2glD5/Y2Kl7+wsX1W6U2pXasP0IjhcvDU8mJ NXNgfkr6kluMUqHJyqKo8eT/P3Hdv0CK9GsN2vGyfJenCdTSd7EC6KuhWAivi+fG /lf1bVuc2cCiXjxdSOXx+Yz7SjNe56viTaqnn/K6OlfLgErjKnRW+AxPkTZXNtDi pfMMpPXiwPcbQR2wrXG/7OMmJ1kUsfWoIUCx5RDwhF1KbEQVqgaSITLylk+4Yp/3 eM0fYsQ+KvOdAnWKSgfxBhaaiO7z5XDdrnkSHBDoiBrm07BqBgK/v3Rivzf2GMEv QvM4OBfThS9I8skV5BaOBRDfHZs4N0EU/vhsW9gt50urtlSM0vSYx6kdMq/8R0k4 NkJT43u+1vi5koMljBAsZYZiyXOQ2B+PlfpTMfMu+93QH8wlu9mOt1r3YTQyA1Xf jiOK8M2yQKP5g7RuPM6MtMsqlZKDM5nAlSf7S280Z3+vBd+LaELbXvT2/JL5ViGU hfH/gaNwUGUYd8EsWvfhHVdPAAecDCwxfKyKEnFGhMrtunTgwfI= =nV64 -----END PGP SIGNATURE----- Merge tag 'gpio-v5.1-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.1 - support for a new variant of pca953x - documentation fix from Wolfram - some tegra186 name changes - two minor fixes for madera and altera-a10sr |
||
|
Parthiban Nallathambi
|
9175a8116f
|
arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
Add pinctrl definitions for Actions Semiconductor S700 I2C controllers. Pinctrl definitions are only available for I2C0, I2C1 and I2C2. Enable I2C0 (PMIC), I2C1 (gyro, touchscreen) in cubieboard7. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
||
|
Parthiban Nallathambi
|
7cf0aacfa8
|
arm64: dts: actions: s700: Add I2C controller nodes
Add I2C controller nodes for Actions Semiconductor S700 SoC. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
||
|
Saravanan Sekar
|
7cdf8446ed
|
arm64: dts: actions: Add pinctrl node for Actions Semi S700
Add pinctrl nodes for Actions Semi S700 SoC Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
||
|
Manivannan Sadhasivam
|
7cac6c0cb3
|
arm64: dts: actions: Add Reset Controller support for S900 SoC
Add reset controller property and bindings header for the Actions Semi S900 SoC DTS. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
||
|
Manivannan Sadhasivam
|
782976299a
|
arm64: dts: actions: Add Reset Controller support for S700 SoC
Add reset controller property and bindings header for the Actions Semi S700 SoC DTS. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
||
|
Manivannan Sadhasivam
|
ccb01374a8
|
arm64: dts: actions: Add interrupt properties to pinctrl node for S900
Add interrupt properties to pinctrl node for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Arnd Bergmann
|
29cf2ee3b5 |
Qualcomm ARM64 Updates for v5.1
* Add MSM8998 RPMCC, I2C, and USB related nodes * Add MSM8996 rpmpd node * Fix typo in MSM8996 pin definitions * Disable MSM8996 VFE smmu to fix security violation * Add I2C, SPI, rpmcc, uart, and WCN3990 wlan nodes on QCS404 * Enable SDCC1 HS400 support on QCS404 * Add a multitude of nodes on SDM845: SD, UFS, USB, LPASS, SCM, QSPI, PDC, DPU, videocc, GPU, RPMh bus interconnect, WCN3990 WLAN * Add gpio ranges to SDM845 TLMM * Fix regulator load on sdcard on MSM8998-mtp board * Add thermal trip points to cpufreq * Add SDM845 IOMMU info for SDHC, USB, and WLAN * Fix MSM8916 clock cell argument -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcZxDLAAoJEFKiBbHx2RXVWGgP/080wwgcj0gJP31orLypfSJa 9UYndhjdEVpomP3YOKNCUMyGO5MtQAIPXF3yPO30UER4mUsjDYmtZhlhIGPHDy3w 1ZAjIKPBb/9ujz3+/A4VHTVnySdgAdGDhUfXsae8cu+/55GGcbspbvev0Mt81QXm n5Wk0rI2LDJsVKoV5PVV/YuWZgf7cycvW7b3kGKDD9mckbJ4IJZqXOQ+3sd8Gal+ RSS3l82ndKTJ8fugHxCroxAbS0CqPESqd8X/nopNdM3z2c4jlDd57v3NpygyfPQ6 /zKergRb02j4YqsB7Gv9m868beqmGjrmbAov1+v1MMEztoobSPwQZK/dkerHz5yf e1K1dYHHnpvDA5sYZwNlTge/IojMZy5Rsm1Fs8ZQxun+6RrjfHW7QJbgQkcE2l/i ISjRPUQTOGN2d+6XfoIRu76m13A7H9LiutW2IG10p6vFrwePuE3hwCO5XH2puAak +1k4g+nBgzRlx+u01qKHqZq7nQwYfCq+fW3yqYOsepYTmaLUcT8+78C4PGu7Dz0P sYCooq+byJ5eOPaq4DpA5szU2FuBABlBqBRVA+Wmy9slNuHiiK1fIOPO4V97Glqz 2F4Iivr9mbw79OrXx6bcqJm6EbAgpvyonlRnw0BVYd+1DEVEHntSx2QVN5wiEjqe d6oyVpZT1VJb0CpnGU9p =FgSp -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm ARM64 Updates for v5.1 * Add thermal trip points to cpufreq * Add SDM845 IOMMU info for SDHC, USB, and WLAN * Fix MSM8916 clock cell argument * tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: sdm845: Fixup dependency on RPMPD includes arm64: dts: sdm845: Add clocks and iommus to WCN3990 WLAN node arm64: dts: qcom: sdm845: Define iommus for USB controllers arm64: dts: qcom: sdm845: Define IOMMU for sdhc 2 arm64: dts: sdm845: wireup the thermal trip points to cpufreq arm64: dts: msm8916: remove bogus argument to the cpu clock [arnd: I've pulled the earlier branch again after an update, this adds the stuff listed above, and fixes a build error from the missing dependency, as I requested] Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
0fe8f1e5bb |
AM654x SoC updates for v5.1 (part 2)
Contains a few DT updates on top of part 1 of the pull: - MSMC RAM support (on-chip SRAM) - Main system control module support - USB support - ADC support There is an extra dt-binding update included, which has been acked by Rob. -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEtQ6szHmfiBT7fujkyvq9MXlQGhEFAlxme1MQHHQta3Jpc3Rv QHRpLmNvbQAKCRDK+r0xeVAaESgdD/9aZCR4YX27oQV5YmIsT0DkleOve48MIK9A ex2Qk5dtZM8GRPTKQPfI1i8kHMya9Hlwb3NRAjCrZnnNRjge5LvTcDWbvSeUzlc1 BjyygctF2Sb9zKKyCoqV9UklpXisqw3QTxwmtUkdHNAzeyiQe71MM8XCEeBHcjUu 7EZJUzBPX4fABo560/1phubG4PrLA7eNG8gPl0p0LFf91ug5c+QO0jv+3p7K9pvn o4TxyKgEXwADfx4px6y6u4uEuO3OXtYWNGbRhAaGXUAgEFiOYz5gJlgti7M16kXb D1YeE4oKl3aXbCjb2V5FzoNw08zgQZgRT3QltyQnAZ/kYs1CFX4ooXUMx9GuCaJ3 T2UZ33t2lm4zVoYhlpKlZlZlk7bO4U9ZaOeSv+daKitpxvZPyJM7NLRTawCc3yyZ 08RJmYAf9Rl6MmNbrhyX3XQ5VC9/O26L1Gx+92bRFvdNL3Uwoi6T8bWFxbWrdr76 cL2aF9rYzVq3dQetNiqozg0GB/sCgEO1luGgkfIMLS9CpNxLPNa6orysRfMfkdJh b1R51dUq80cl5v2lagTquFKb1T+/GRgEv/hi9aIR/Yfl2ASufFFQGkCKUPyFnPoX BhH7Izg47x8HwAPU2s20nMJmaZ7hJ0PW1MUqidXgIdto9X82QWLcUCoeGXG1PAJR uWFlyqaNag== =L6dq -----END PGP SIGNATURE----- Merge tag 'am654-for-v5.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into HEAD AM654x SoC updates for v5.1 (part 2) Contains a few DT updates on top of part 1 of the pull: - MSMC RAM support (on-chip SRAM) - Main system control module support - USB support - ADC support There is an extra dt-binding update included, which has been acked by Rob. * tag 'am654-for-v5.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-am65-mcu: Add ADC nodes dt-bindings: input: ti-tsc-adc: Add new compatible for AM654 SoCs arm64: dts: ti: k3-am654-base-board: enable USB1 arm64: dts: ti: k3-am6: add USB support arm64: dts: ti: am654: Add Main System Control Module node arm64: dts: ti: k3-am65: Add MSMC RAM node Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Andy Gross
|
08585d21de |
arm64: dts: sdm845: Fixup dependency on RPMPD includes
This patch fixes a dependency issue with the RPMPD dt bindings. This
temporarily removes the include file and adds hardcoded values for the
OPPs until the other changes full land. This will be addressed in 5.2.
Fixes:
|
||
|
Arnd Bergmann
|
87503c012a |
UniPhier ARM64 SoC DT updates for v5.1
- Add PCI Express controller nodes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcZgK+AAoJED2LAQed4NsGnkAP/3ky1bx1+vDYgJ8yQFlUP/A/ RZZ1XixwzcPPNNhsIQBaxvXfjLdH0VdCFI01NAeOpi5EJKe7NhuRah3ILav5t80g Dq8LQNdUEaoDBnnN53UP2HjCQeaVDhKNCzMtcTrNy4mGX1uyzr+e7E/I4NIQ7IT8 JXn8D93T32JX1gLEqXkr06yOkykjxMEYH3SjCceGjZrkNCJIzW/LDL9NcLQ5amXs cp3+0dIqFUjMX1GB+Q+KRsmS3NKFNJ1zRht73hRyj4Q7G3ZMh22Vr9sBjCNuPWDs LDiDAkQ+X2g6OzUjQ4Yo8fGAPSXswiDYet9TxHtZ1nmlLFU/VfaKYk47drrHUzp8 Pbyv3ZRmulheh7zyMybtqPtrnN6ZFMZSoROXFeLYcWJdKWyWpoOxjf4+jcZd/+KY EslnzJ/asbDyUFbs85Mt94v3Zm3tABwjhUqCuUZYElNSV31I4RaNHPYVO5SNnYBP YZTU13edGWTjaQoL6zL75YMXAcv9F9M1gYGo6vB/LsXQf/rZU+S/rExID/Jddd0B 6r1CyDYouiHILYPVwPeDhh0zW1QOW0Q9yxyuUPtOjGD7l2W3DXPimBriLuHfKmxc s4BFWXgFZUKGd3/YjNg9R3dZmFHUbfqU4fS2w8pzb8nmJ74hYNQYyiH5xs8VPgVH Q2YhCkU7tZizdKR/6sDq =bPrQ -----END PGP SIGNATURE----- Merge tag 'uniphier-dt64-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM64 SoC DT updates for v5.1 - Add PCI Express controller nodes * tag 'uniphier-dt64-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: sort labels in the same order as in dtsi arm64: dts: uniphier: Add PCIe host controller and PHY nodes Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
69733808a4 |
arm64: dts: zynqmp: DT changes for v5.1
- Extend timeout for wifi to power up on Ultra96 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlxiwJUACgkQykllyylKDCGTFQCgkxFLqTdsRVpcXbwdVZbI0TBL CukAn3kkFlyUv/OE8z3K1u32tHKTDqyK =2Qw6 -----END PGP SIGNATURE----- Merge tag 'zynqmp-dt-for-v5.1' of https://github.com/Xilinx/linux-xlnx into arm/dt arm64: dts: zynqmp: DT changes for v5.1 - Extend timeout for wifi to power up on Ultra96 * tag 'zynqmp-dt-for-v5.1' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zcu100-revC: Give wifi some time after power-on Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
b217a721e9 |
i.MX arm64 device tree changes for 5.1:
- Add initial i.MX8QXP SoC and MEK board support.
- Various device additions to i.MX8MQ SoC and EVK board support:
RTC, QuadSPI, PMU, ECSPI, PWM, GPC power domain, USB etc.
- Use generic node name for m25p80 flash on layerscape devices.
- Add num-viewport property for layerscape PCIe devices, and
incr-burst-type-adjustment for USB3 devices.
- Add LS1012AX based Oxalis board support.
- Add fsl-mc, FlexSPI device and dma-ranges property for LX2160A SoC.
- Add SMMU device and missing dma-coherent property in fsl-mc for
LS1088 SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcYp9oAAoJEFBXWFqHsHzOtIMIALOPv2znXL5iMfC3hYdcf8eJ
6+1iXfMn2735bldUZn+mMVZ4/sCM1gyIGzOMPI2E26fzcGgd5Lw0sJ+Tqo7SuvEa
NRhI0T+xeNAK3wTxSQ5kSot+8Ne85UwyjiXyN+pL1ifsHQtZ3h3J3KKIc+34X8Sx
AkIofB2R+/Kv3nJfXOa6pep6sw+FR9hVlBtxj7OAU3eMBOAcO4RJkyDcsqt02fbo
GIefiDDIaOOPMCBNdE+Sh4o7qifVMUcGlom4umm3oieXKKA31i0AwjeDOQidNfrW
Dl10EO+bjxgHrcuXDq39Z8Rsl4iRXHyNcOWs+sqKG9u/6nKWukr590/fPJ9OUPA=
=eglh
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree changes for 5.1:
- Add initial i.MX8QXP SoC and MEK board support.
- Various device additions to i.MX8MQ SoC and EVK board support:
RTC, QuadSPI, PMU, ECSPI, PWM, GPC power domain, USB etc.
- Use generic node name for m25p80 flash on layerscape devices.
- Add num-viewport property for layerscape PCIe devices, and
incr-burst-type-adjustment for USB3 devices.
- Add LS1012AX based Oxalis board support.
- Add fsl-mc, FlexSPI device and dma-ranges property for LX2160A SoC.
- Add SMMU device and missing dma-coherent property in fsl-mc for
LS1088 SoC.
* tag 'imx-dt64-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
arm64: dts: imx8mq: specify dma-ranges
arm64: dts: imx8mq: Add ARM PMU node
arm64: dts: imx8mq: Add RTC support
arm64: dts: imx8mq-evk: Enable the QuadSPI controller
arm64: dts: imx8mq: Add QuadSPI controller
arm64: dts: imx8mq: Add ECSPI support
arm64: dts: imx8mq-evk: Add fsl,magic-packet property
arm64: dts: imx8mq-evk: add missing MDIO / PHY nodes
arm64: dts: imx8mq-evk: enable USB nodes for USB3 host
arm64: dts: imx8mq: add USB nodes
arm64: dts: imx8mq: properly describe IRQ hierarchy
arm64: dts: lx2160a: update fspi node
arm64: dts: freescale: Add devicetree for Oxalis
arm64: dts: lx2160a: add FlexSPI node property
arm64: dts: imx8qxp: Fix MU4_INT number
arm64: dts: imx8mq: add GPC power domains
arm64: dts: imx8mq: Add pwm device nodes
arm64: dts: imx: add i.MX8QXP system controller RTC support
arm64: dts: imx: add imx8qxp mek support
arm64: dts: imx: add imx8qxp support
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
e7b984912d |
arm64: dts: Amlogic updates for v5.1
- new board: G12a-based x96 max - G12a: add peripheral clock controller and clock measure support - s400: fix SD/eMMC max rate issues - s400: audio: add sp/dif in support - GX: support simplefb -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlxh3OEACgkQWTcYmtP7 xmUzig/9H+BF3/sgQaa7Om4Bj58V0/F7Q+OFgWl8ZFmYRmtxb5COSnpjLIwp2OMf Hry6UqG3sr2/+34vDK//bctriO1JweXDZdvPGMm+J/nss2SzqO6MIbBUjhr2PJJS /xcApBX3V5Zju+1YFf0hYPWuRo+RLsdE0ENmu2Q41HTuuyrkEtcqx+MRYpz7I6Pw z3FF2SbZ1DRQcVNdhYlRmApSvBswNgagRXZOKDr9Je8vFr4+XYDrJ8rEPQNcj+HG RGOTH23yb8C/yD87wUSPBI/6HgvD9UNWQ8vTAJRL49hsWVlxydPUsVHq7qh0On+e Rugjie1P0taxiZkuHdQ08qNOMw0ZKYig+y8XvrFc34xbJLUy32F2D6xmEEGf7DiS oC0wgWV2UYpr25DU6cn8Iq6BKtao2FjuhsqunLFFmaiEkl9x0/bpBZ8wsU6tLfrd mViCsD5w5oQ+zpG0YT2pyNZST8cQKA+WQN9Cca8Z/2EpJbKR7Mc7hvZcvrNHSs/c Tt9L5CwOJswUgORdiPv4/Oc2ZhADIPRsxXE+rjPa9ffYWS+21QM7y2imRIAuhqKQ RsSk1m+TXhdzkTP6gk25b4dhPDGwT8Um8c5P3ZSpqJX2HIKmxM0K5vrlBd7MtGyu uLD4vRfe3WC5C9mSTFIdPFdz8QaTHXZH3w4DVPdMYGtYjG6DGxg= =gldI -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.1 - new board: G12a-based x96 max - G12a: add peripheral clock controller and clock measure support - s400: fix SD/eMMC max rate issues - s400: audio: add sp/dif in support - GX: support simplefb * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add g12a x96 max board dt-bindings: arm: amlogic: add amediatech x96-max bindings arm64: dts: meson: g12a: add peripheral clock controller arm64: dts: meson: g12a: add clk measure support arm64: dts: meson: axg: add clk measure support arm64: dts: meson: fix g12a buses arm64: dts: meson-axg: add efuse device arm64: dts: meson: s400: fix emmc maximum rate arm64: dts: meson: s400: enable sdr104 on sdio arm64: dts: meson-gx: add support for simplefb dt-bindings: meson: add specific simplefb bindings arm64: dts: meson-gx: Add canvas provider node to the vpu arm64: dts: meson-axg: s400: add spdifin to the sound card arm64: dts: meson-axg: s400: add spdif-dir codec arm64: dts: meson-axg: add spdifin Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
1c2950563a |
mvebu dt64 for 5.1 (part 1)
- Interrupt support to Armada 7K/8K thermal nodes
- Armada 37xx related patches allowing to enable suspend to RAM
(USB2, USB3, PCIe, SATA, DSA)
- uDPU board support (Armada-3720 based):single-port FTTdp
distribution point unit
- Fixes for EspressoBin Ethernet support when using U-Boot mainline
- cleanup for partitions under flashes nodes
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXF3x1wAKCRALBhiOFHI7
1ZtFAJ4pn8nIeHqWgYEUmWmCpQXnUoc4eQCgninj7JcAFV8KNLKhRCkKdlkeO38=
=Wt6S
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.1-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt64 for 5.1 (part 1)
- Interrupt support to Armada 7K/8K thermal nodes
- Armada 37xx related patches allowing to enable suspend to RAM
(USB2, USB3, PCIe, SATA, DSA)
- uDPU board support (Armada-3720 based):single-port FTTdp
distribution point unit
- Fixes for EspressoBin Ethernet support when using U-Boot mainline
- cleanup for partitions under flashes nodes
* tag 'mvebu-dt64-5.1-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs
arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property
arm64: dts: marvell: armada-3720-espressobin: declare PCIe PHY
arm64: dts: marvell: armada-37xx: declare the COMPHY node
arm64: dts: marvell: Remove unnecessary #address-cells/#size-cells under flashes
arm64: dts: armada-3720-espressobin: Set mv88e6341 cpu port as RGMII-ID
arm64: dts: armada-3720-espressobin: Configure RGMII and SMI pins
arm64: dts: marvell: Add device tree for uDPU board
arm64: dts: marvell: armada-3720-espressobin: declare PCIe warm reset pin
arm64: dts: marvell: armada-37xx: declare PCIe reset pin
arm64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs
arm64: dts: marvell: armada-37xx: fix USB2 memory region
arm64: dts: marvell: armada-37xx: declare SATA clock
arm64: dts: marvell: armada-37xx: fix SATA node scope
arm64: dts: marvell: add interrupt support to cp110 thermal node
arm64: dts: marvell: add interrupt support to ap806 thermal node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
1de741634b |
mt2712:
Add device nodes for usb3, iommu, smi, i2c, spi, pwm, mmc, NAND flash and PCIe mt6797: add pinctrl node enable uart pins on x20 board enable uart pins on EVB mt7622: Add all CPUs to the cooling maps mt7623a: Remove unused binding description mt7629: Add binding description for the SoC and the BananaPi based on this chip mt8173: Add all CPUs to the cooling maps mt8183: Add binding description for the SoC -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlxd2gYXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00MXBg//VKQgMqIWshMhu7hrD0wkPXZw B0BJVlWhywTEisv3oduSL5HOVzKU6pQrWnF+X9PYokwNxz3VkNh3RixaLGsY3JOr mkGtx3zAi1qsKYoKH6PNBhJVNCdX8D9SFlBSNOGkK0P5s0kjuPqzk28QU3ehwzdo pFjbNadNDL9ySoybFtWGR8UwNkqq0w9acuiZbuRrqzdqkZLdxQ6zDry9P9s+97lA WxFQEm+yhGHkpOb1XG75Zw3JBG55L3KymZV+h60wqHvdVCszINZZ9C2c/PqsWGVd JzWMJPx2cghfLZdGlr5HQhKD5xM2Swmy2b5co4yRwsSmXdiK2RDkHkkli5CMpiIG bt/6v3YffIVV07p/pzWrcOhJex4tCs0w3w24T03FxfCWVNXwb2kIV0Sv8dSBhUku aESCBSrU0XAaKmhOPv49ys1oACpvPA9v/QyR+YyQPnK/4c4YezPidhCStvzhoxFG a64OID6B1cmhI8PBCecRG22fEmDxktTj/FJ/0nsdbUgwbMXubr2vr9RzJW3B/M+G z2ykW6q2K736EWWfKTpzXxfghVSaE90F1leQ3hjIv7h4AuribDw4IJ6ye+uI4Hb/ jiVHy6TSk8C07jMsvjifs1dL7UF6GIisD+90psuaiYngjilQkaHeDkosybe4qA6n +r/pe4bCWvajl37DMXs= =xm9P -----END PGP SIGNATURE----- Merge tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt2712: Add device nodes for usb3, iommu, smi, i2c, spi, pwm, mmc, NAND flash and PCIe mt6797: add pinctrl node enable uart pins on x20 board enable uart pins on EVB mt7622: Add all CPUs to the cooling maps mt7623a: Remove unused binding description mt7629: Add binding description for the SoC and the BananaPi based on this chip mt8173: Add all CPUs to the cooling maps mt8183: Add binding description for the SoC * tag 'v5.0-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: arm: mediatek: add support for MT7622 BPI-R64 and MT7629 RFB dt-bindings: arm: mediatek: remove unused "mediatek, mt7623a" dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform arm64: dts: add pcie nodes for MT2712 arm64: dts: add nand nodes for MT2712 arm64: dts: add mmc nodes for MT2712 arm64: dts: add pwm nodes for MT2712 arm64: dts: add spi nodes for MT2712 arm64: dts: add i2c nodes for MT2712 arm64: dts: add iommu/smi nodes for MT2712 arm64: dts: Add USB3 related nodes for MT2712 ARM64: dts: mediatek: Add all CPUs in cooling maps arm64: dts: Add uart for mt6797 EVB arm64: dts: mediatek: x20: Add pinmux support for UART1 arm64: dts: mediatek: mt6797: Add pinctrl support Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
1228c051ba |
arm64: tegra: Device tree changes for v5.1-rc1
This contains a couple of fixes to existing device trees, enables CPU frequency scaling on various Tegra210 boards, enables the TCU as debug serial port on Jetson Xavier, adds various improvements for SDMMC on Tegra210, Tegra186 and Tegra194 boards and finally adds initial support for the NVIDIA Shield TV. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlxdmX0THHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zob8+D/4oX6rlHS70H1CVhEF/2JejVBki5iX2 YGsjtywFGVU072OjQrIXARq/7LlH/4ykF8m8rNCTCzL1SewxpAhzTuyHSAitREjX FMICa9bfv26J8n4n9SVOvuWmHc88rK3xaXgiKXIO/2viZsVDC7jeEfl/ztbSUWC7 KHx3moU3mzM0AqIX0z+tYg93uxYpx/sUgygLsJIneaj7b1g5sMZCAdLWQnvXmZKf q5WTwbfUmhg2OrhnO6WXr6swmo7cXKO3zJcm/+b2adf01axMgCjA1RVFgO9yonqn s2402oVRv/y7jsM7HGptlS6NqcurMnhlKCEUsVucXugWwbbAj/oFirYiCWW6fkq/ fgpOVbudjtF4jEiwxJ1KOVXlT34/Tt/Rksxr9uAht2L3KyDCT6mVKFVHq2jIFYVx bIXT9HB3/ZjoVQzQKwRqKR8P9923avMmGvkGrDVXvvXx10hm7CK+UYJxOuwf80dQ 7ahfqSf34Pm3ezWpzr2TJxbd1DOFl57W2K/BjM3eUolwYXwIv8jANj87CqJj+llf gtzMZS1bEdmFiP8DVnW0oQRS7quqSw0jo6qYLPV/dUBMPLFN8kdoWC9AfpQAaOxY jJjpKBTkRcpc48TNAqcAuq53d1f+fsRptuIX2sLuSz7i3mQ80fJo+dET836Q0nYx YYgVNWlJ5FTYyg== =31KA -----END PGP SIGNATURE----- Merge tag 'tegra-for-5.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.1-rc1 This contains a couple of fixes to existing device trees, enables CPU frequency scaling on various Tegra210 boards, enables the TCU as debug serial port on Jetson Xavier, adds various improvements for SDMMC on Tegra210, Tegra186 and Tegra194 boards and finally adds initial support for the NVIDIA Shield TV. * tag 'tegra-for-5.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits) arm64: tegra: Update compatible for Tegra186 I2C arm64: tegra: Update compatible for Tegra210 I2C arm64: tegra: Support 200 MHz for SDMMC on Tegra194 arm64: tegra: Add CQE Support for SDMMC4 arm64: tegra: Add SDMMC auto-calibration settings arm64: tegra: Mark TCU as primary serial port on Tegra194 P2888 arm64: tegra: Add nodes for TCU on Tegra194 arm64: tegra: Enable DFLL clock on Smaug arm64: tegra: Add CPU power rail regulator on Smaug arm64: tegra: Enable DFLL clock on Jetson TX1 arm64: tegra: Add pinmux for PWM-based DFLL support on P2597 arm64: tegra: Add CPU clocks on Tegra210 arm64: tegra: Add DFLL clock on Tegra210 arm64: tegra: p2771-0000: Use TEGRA186_ prefix for GPIO names arm64: tegra: p3310: Use TEGRA186_ prefix for GPIO names arm64: tegra: p2597: Sort nodes by unit-address arm64: tegra: p2972: Sort nodes properly arm64: tegra: Add regulators for Tegra210 Darcy arm64: tegra: Add pinmux for Darcy board arm64: tegra: Add gpio-keys nodes for Darcy ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
ec38fad35f |
Second Round of Renesas ARM64 Based SoC DT Updates for v5.1
* R-Car Gen3 SoC based Salvator-X, Salvator-XS and ULCB boards - Enable HS400 support for eMMC * R-Car E3 (r7a77990) SoC - Add OPPs table for cpu devices * RZ/G2E (r8a774c0) SoC - Describe TMU, CMT, SDHI devices in DT - Describe pincontrol support for SCIF2 device in DT - Add OPPs table for cpu devices * RZ/G2E (r8a774c0) based EK874 board and CAT875 sub-board, and CAT874 board - Initial support -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlxdYfIACgkQ189kaWo3 T76PixAAnSzRxLUHssiuUZMje7PMJQiof41rO6800v3NK53z1KQe7azDuB8X2rrd uWYieSlUudRkFGVMT3hNzXHaonWucEklJAGoud2w5Ih2Vd9zOvK2Ae2dKn0Pf5aU jRKhYB2y+vUY+UT6AQO5sddHSnwb1iXY2XEqa3+obO5VxPrjCEkExiu6VYsZoIIh s5vSek/7SdifScwSAM7ZombvsFYvTZl2caCJYFeKK21sVKZfUUEq5DWfobYwiWMe P05LstjaD2FdkEgGECL4a7gWuHYF9hsSuSsJ7yy4si6BlFKASylRCQA27YvHFOle otDaStMj3vFpq5jLuGnGFIdXIDw173h5RR/g4QJbjM+eWAPn8NDelbrxq8tbMV+7 nbHjNUvc4+rcHEzlLQTfsGoYKejY+cOndefIbviflieLJKzRzRuWuqkt19NwblcR fgseBR1fTaVciLORvm17xhYWZMPDVCggaooegkKJ2+yOu626Y7bfVT+BJqds6PTo G7KwGXJb5Kj49cgeEsco/WNoOkSatYha8FwBzBZW+fWdMeBxWHMX34ycgeWyjY0c T79Ik9vIcyeRmmYFKOm/aJZZ/CRoOvLOO8u4nLtJ1bBrMnKetLVGjUIrOecFtbw0 e0oxCNiLZ7iVGsdcnMxCpmMhBV9hEVgsdhShQAfyUb6sAYdP578= =3PTZ -----END PGP SIGNATURE----- Merge tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Second Round of Renesas ARM64 Based SoC DT Updates for v5.1 * R-Car Gen3 SoC based Salvator-X, Salvator-XS and ULCB boards - Enable HS400 support for eMMC * R-Car E3 (r7a77990) SoC - Add OPPs table for cpu devices * RZ/G2E (r8a774c0) SoC - Describe TMU, CMT, SDHI devices in DT - Describe pincontrol support for SCIF2 device in DT - Add OPPs table for cpu devices * RZ/G2E (r8a774c0) based EK874 board and CAT875 sub-board, and CAT874 board - Initial support * tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: cat875: Enable PCIe support arm64: dts: renesas: r8a774c0-cat874: Add pciec0 support arm64: dts: renesas: r8a774c0: Add TMU device nodes arm64: dts: renesas: r8a774c0: Add CMT device nodes arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices arm64: dts: renesas: enable HS400 on R-Car Gen3 arm64: dts: renesas: cat875: Add ethernet support arm64: dts: renesas: r8a774c0-cat874: Add uSD support arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2 arm64: dts: renesas: Add Si-Linux EK874 board support arm64: dts: renesas: Add Si-Linux CAT874 board support Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
175a366f70 |
Allwinner arm64 DT changes for 5.1, take 2
Our usual round of DT changes for the arm64 Allwinner SoCs: - Enabling of the various power supplies on most a64 boards - H6 SRAM controller support - A64 CSI support -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXF1ZiQAKCRDj7w1vZxhR xeeaAQCuII0MyMyRYhk4XPkjRncEks7A1Fp7u1kjR4VjbNq8JQD+OhCbKMAz4DVv T7DeI92HwEO2Dx/ggNMVYDCUDyH55gI= =Pd5b -----END PGP SIGNATURE----- Merge tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner arm64 DT changes for 5.1, take 2 Our usual round of DT changes for the arm64 Allwinner SoCs: - Enabling of the various power supplies on most a64 boards - H6 SRAM controller support - A64 CSI support * tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards arm64: dts: allwinner: a64: teres-i: enable power supplies arm64: dts: allwinner: h6: Add support for the SRAM C1 section dt-bindings: sram: sunxi: Add compatible for the H6 SRAM C1 arm64: dts: allwinner: a64: Add A64 CSI controller arm64: dts: allwinner: h6: Move GIC device node fix base address ordering Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
51098f76dd |
Allwinner H3 and H5 changes for 5.1
Our usual round of DT changes shared between arm and arm64. We have a bunch of changes for board, improving the eMMC support on the H5 variant of the All-H3-CC, enabling HDMI and reworking the CSI driver. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXF1X8QAKCRDj7w1vZxhR xX9ZAP9KwFKKehrS1QJjTHKeowUKEnRHuDj2MlwTZJgCw/AMMgEAzgRZwY/VH/Os aQIhJho9hWmBE0dePIZuWzzCp1giNw8= =7jQV -----END PGP SIGNATURE----- Merge tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner H3 and H5 changes for 5.1 Our usual round of DT changes shared between arm and arm64. We have a bunch of changes for board, improving the eMMC support on the H5 variant of the All-H3-CC, enabling HDMI and reworking the CSI driver. * tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: libretech-all-h3-cc: Mark eMMC HS-DDR 3.3V capable ARM: dts: sunxi: h3/h5: Drop A31 fallback compatible for CSI controller ARM: dts: sun8i-h3: nanopi-m1-plus: enable HDMI Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
f5691ad172 |
SoCFPGA DTS updates for v5.1
- Add SMMU node for Stratix10 - Add vendor prefix fo Novtech - Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA - Add missing reset properties for all IP on Cyclone5 and Arria10 -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAlxYYAAUHGRpbmd1eWVu QGtlcm5lbC5vcmcACgkQGZQEC4GjKPSfPA//a013n1vCV9Wz6RsbXNRODXzhV6FN 9uPWAdbkuWrCvDFAH+9s/0nMwxAj8f1HCEK9J07CPRcjcLPO7iHfIUeJ4lbCNCXZ 1ZuLDdK0Y4GjziJ4xlUP0JvUpJXtRKo+XDXVC+jNAMQy6wQpsEYdEwpeTPo94jrv X0Zait3PeaY6ai6ImzV4QOYYmZ9GhRHjNY/Hc8jSsZeMWk+sMWygExlUngXlpO8c dvK1Z4dfhrRZyJ/ewjjb/D0eekq8XiIfGmI4A2Cox3A73XAmtPEL3MT57BbPnq7f jmNmlh7yRrxZHVErSt0dJTOJ6dNx+McuuwSmDL1vR19M44JUbVOjLjDUEwA7tSmr eQXVhGuYHfxgJT0CeEBIHJAxPZfTqy68IijZYXv4aWimFdsbeAtraY7PKeZ/TnOP 3Aa9GDSks5NsAGVR5AltiNRmZujyQktbcNU8TcNt8tc19Kub8Q9GVhsmPUIKEov8 oAeXq4xbvGe6Ike6cfR1H+P14mgpbxJSZwGQoqky1T3lWqFBhl/93/ixpzt5jMWX 96tHA7VuZ7+in3BoqzHNxZ2PWpHScd3UScLxzxFEotW2nCofXCLCVkW+Zl8xWLa9 eu5GXE0ZzA04Elaagj2MM/rTsIgWFWqROq4A3Za6k5AB7quThr1yMoL+5Q5keOlO 4xAhCKudZb74BS4= =8OgV -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.1 - Add SMMU node for Stratix10 - Add vendor prefix fo Novtech - Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA - Add missing reset properties for all IP on Cyclone5 and Arria10 * tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: update more missing reset properties ARM: dts: socfpga: update missing reset property peripherals ARM: dts: Add support for 96Boards Chameleon96 board dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix arm64: dts: stratix10: Add Stratix10 SMMU support Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
01a8ab4e5e |
ARM64: DT: Hisilicon SoCs DT updates for 5.1
* Hi6220 SoC and related boards: - Add DMA entries to enable DMA for Bluetooth transfers - Add power-on delay to make wifi stable - Revert HS200 mode to avoid eMMC controller resets and block read failures * Hi3660 SoC and related boards: - Fix SD card detection via setting cd-gpios correctly * Hi3798 SoC and related boards: - Fix malformed SPDX license identifier -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcWB5TAAoJEAvIV27ZiWZcTqAQAIfGVimt3HQyC+k/pz8rS6XD VSnRGUDx69qmrnVqzP9nk+KmAz4LRDndLSYlaxgAtabWsR3s8nH9EM0f2uD4j1gl 07B9wUH0VKxbJCleGVTHGoeLp+MSPDWiDxHfFdnip3x8Xf9rWk/781We9lAe9GVs i1xC2/79OtSJdjSZ56SBv8X+tGl3XCVxQ9mKU1X+8OBc+R799Ml4onM/oOexH7PY jOWSsMhOS53bYqd0Ja1Q3soi1IYaEZoqqo2OadH405jJ0Zxs8EN1sRt4JUs8Un9u gMmDLziXE8aGnCGiGV9OwM3CXgVyv41lA9hR8grUI7ciHc1YEeVskEx5lQBRLUoA OWK2BykRw8T8ISKERvniJXM2tgDt7HhusFcmr7fVthzeJryA0+KeVMoeZo/o35C+ a5klKriCdh1eqNR9G0LB3F+j1xwQZp61wc6aL3iSTg+UCLiXKrQSuW5GJAnL5OtO +Z6JUifanxtqMklD7IKhcmJOzoSMtp6GJGFTFz1NT6QKNwO7eJd2vSKvuSghD5jS KZ1CT8HkQJ6i7CKmv3mTv0AhB/Q1wOJdG2n7T6nvESypdUjsb50lQJrWSVXsl3XH e52lKzuYHkI6h6SQTJkzZUOQoBvsYSuNFBJEFpB628ynLHWU16rBFbdEMup5I68g ToqnOaND2qXmcij8nykS =ZFkH -----END PGP SIGNATURE----- Merge tag 'hisi-arm64-dt-for-5.1v2' of git://github.com/hisilicon/linux-hisi into arm/dt ARM64: DT: Hisilicon SoCs DT updates for 5.1 * Hi6220 SoC and related boards: - Add DMA entries to enable DMA for Bluetooth transfers - Add power-on delay to make wifi stable - Revert HS200 mode to avoid eMMC controller resets and block read failures * Hi3660 SoC and related boards: - Fix SD card detection via setting cd-gpios correctly * Hi3798 SoC and related boards: - Fix malformed SPDX license identifier * tag 'hisi-arm64-dt-for-5.1v2' of git://github.com/hisilicon/linux-hisi: arm64: dts: hikey: Revert "Enable HS200 mode on eMMC" arm64: dts: hikey: Give wifi some time after power-on arm64: dts: hi3798cv200: fix malformed SPDX license identifier arm64: dts: hikey960: fix SDcard detection arm64: dts: hikey: Add DMA entries for Bluetooth UART Signed-off-by: Arnd Bergmann <arnd@arndb.de> |