Add support for Xen para-virtualized frontend display driver.
Accompanying backend [1] is implemented as a user-space application
and its helper library [2], capable of running as a Weston client
or DRM master.
Configuration of both backend and frontend is done via
Xen guest domain configuration options [3].
Driver limitations:
1. Only primary plane without additional properties is supported.
2. Only one video mode supported which resolution is configured
via XenStore.
3. All CRTCs operate at fixed frequency of 60Hz.
1. Implement Xen bus state machine for the frontend driver according to
the state diagram and recovery flow from display para-virtualized
protocol: xen/interface/io/displif.h.
2. Read configuration values from Xen store according
to xen/interface/io/displif.h protocol:
- read connector(s) configuration
- read buffer allocation mode (backend/frontend)
3. Handle Xen event channels:
- create for all configured connectors and publish
corresponding ring references and event channels in Xen store,
so backend can connect
- implement event channels interrupt handlers
- create and destroy event channels with respect to Xen bus state
4. Implement shared buffer handling according to the
para-virtualized display device protocol at xen/interface/io/displif.h:
- handle page directories according to displif protocol:
- allocate and share page directories
- grant references to the required set of pages for the
page directory
- allocate xen balllooned pages via Xen balloon driver
with alloc_xenballooned_pages/free_xenballooned_pages
- grant references to the required set of pages for the
shared buffer itself
- implement pages map/unmap for the buffers allocated by the
backend (gnttab_map_refs/gnttab_unmap_refs)
5. Implement kernel modesetiing/connector handling using
DRM simple KMS helper pipeline:
- implement KMS part of the driver with the help of DRM
simple pipepline helper which is possible due to the fact
that the para-virtualized driver only supports a single
(primary) plane:
- initialize connectors according to XenStore configuration
- handle frame done events from the backend
- create and destroy frame buffers and propagate those
to the backend
- propagate set/reset mode configuration to the backend on display
enable/disable callbacks
- send page flip request to the backend and implement logic for
reporting backend IO errors on prepare fb callback
- implement virtual connector handling:
- support only pixel formats suitable for single plane modes
- make sure the connector is always connected
- support a single video mode as per para-virtualized driver
configuration
6. Implement GEM handling depending on driver mode of operation:
depending on the requirements for the para-virtualized environment,
namely requirements dictated by the accompanying DRM/(v)GPU drivers
running in both host and guest environments, number of operating
modes of para-virtualized display driver are supported:
- display buffers can be allocated by either
frontend driver or backend
- display buffers can be allocated to be contiguous
in memory or not
Note! Frontend driver itself has no dependency on contiguous memory for
its operation.
6.1. Buffers allocated by the frontend driver.
The below modes of operation are configured at compile-time via
frontend driver's kernel configuration.
6.1.1. Front driver configured to use GEM CMA helpers
This use-case is useful when used with accompanying DRM/vGPU driver
in guest domain which was designed to only work with contiguous
buffers, e.g. DRM driver based on GEM CMA helpers: such drivers can
only import contiguous PRIME buffers, thus requiring frontend driver
to provide such. In order to implement this mode of operation
para-virtualized frontend driver can be configured to use
GEM CMA helpers.
6.1.2. Front driver doesn't use GEM CMA
If accompanying drivers can cope with non-contiguous memory then, to
lower pressure on CMA subsystem of the kernel, driver can allocate
buffers from system memory.
Note! If used with accompanying DRM/(v)GPU drivers this mode of operation
may require IOMMU support on the platform, so accompanying DRM/vGPU
hardware can still reach display buffer memory while importing PRIME
buffers from the frontend driver.
6.2. Buffers allocated by the backend
This mode of operation is run-time configured via guest domain
configuration through XenStore entries.
For systems which do not provide IOMMU support, but having specific
requirements for display buffers it is possible to allocate such buffers
at backend side and share those with the frontend.
For example, if host domain is 1:1 mapped and has DRM/GPU hardware
expecting physically contiguous memory, this allows implementing
zero-copying use-cases.
Note, while using this scenario the following should be considered:
a) If guest domain dies then pages/grants received from the backend
cannot be claimed back
b) Misbehaving guest may send too many requests to the
backend exhausting its grant references and memory
(consider this from security POV).
Note! Configuration options 1.1 (contiguous display buffers) and 2
(backend allocated buffers) are not supported at the same time.
7. Handle communication with the backend:
- send requests and wait for the responses according
to the displif protocol
- serialize access to the communication channel
- time-out used for backend communication is set to 3000 ms
- manage display buffers shared with the backend
[1] https://github.com/xen-troops/displ_be
[2] https://github.com/xen-troops/libxenbe
[3] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/man/xl.cfg.pod.5.in;h=a699367779e2ae1212ff8f638eff0206ec1a1cc9;hb=refs/heads/master#l1257
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403112317.28751-2-andr2000@gmail.com
It should initialize before the drivers using it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104736
Reviewed-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (171 commits)
drm/amdgpu: fix test for shadow page tables
drm/amd/display: Expose dpp1_set_cursor_attributes
drm/amd/display: Update FMT and OPPBUF functions
drm/amd/display: check for null before calling is_blanked
drm/amd/display: dal 3.1.27
drm/amd/display: Fix unused variable warnings.
drm/amd/display: Only blank DCN when we have set_blank implementation
drm/amd/display: Put dcn_mi_registers with other structs
drm/amd/display: hubp refactor
drm/amd/display: integrating optc pseudocode
drm/amd/display: Call validate_fbc should_enable_fbc
drm/amd/display: Clean up DCN cursor code
drm/amd/display: fix 180 full screen pipe split
drm/amd/display: reprogram surface config on scaling change
drm/amd/display: Remove dwbc from pipe_ctx
drm/amd/display: Use the maximum link setting which EDP reported.
drm/amd/display: Add hdr_supported flag
drm/amd/display: fix global sync param retrieval when not pipe splitting
drm/amd/display: Update HUBP
drm/amd/display: fix rotated surface scaling
...
This moves and renames the AMDGPU scheduler to a common location in DRM
in order to facilitate re-use by other drivers. This is mostly a straight
forward rename with no code changes.
One notable exception is the function to_drm_sched_fence(), which is no
longer a inline header function to avoid the need to export the
drm_sched_fence_ops_scheduled and drm_sched_fence_ops_finished structures.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some x86 clamshell design devices use portrait tablet screens and a display
engine which cannot rotate in hardware, so the firmware just leaves things
as is and we cannot figure out that the display is oriented non upright
from the hardware.
So at least on x86, we need a quirk table for this. This commit adds a DMI
based quirk table which is initially populated with 5 such devices: Asus
T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17.
This quirk table will be used by the drm code to let userspace know that
the display is not mounted upright inside the devices case through a new
panel orientation drm-connector property, as well as to tell fbcon to
rotate the console so that it shows the right way up.
Changes in v5:
-Add a kernel-doc comment documenting drm_get_panel_orientation_quirk()
-Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop,
keeping only the (identical) sys_vendor and product_name matches.
This is necessary because an older version of the bios has
board_vendor set to VOIS instead of VIOS
Changes in v6:
-Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-3-hdegoede@redhat.com
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaCm8RAAoJEAx081l5xIa+zX0QAJSm31kCG3vdw2CNiRx25L3q
3hcsEOgAjVJ9FQVGKFWjzb8TK35tSqtNx5kWIj0VGaIfBE5Bdg5SLLgKKUYas8rY
4LaphqICq2uxu2BNa2tpiar/sHhAnuozwQ4czpVWXzlaISnb9yYzRl7gMuyUVGkx
+Gih5VUhLmQC0HsRTLJ3vaZQoUsLAl2gAjKcWa1bx57j2S+iKOPfsLaq7VYo+y1I
Njc+iSGqMhJzRLXVkxL2lQKaslp7R38Bbh5K4Kvyjkm4Aq7zErOF6irpOXKMcrGl
mwnr89vf1G9thjikrBaXpKnuvdbWYveoN/ORMlTdCfxkFnChHLnm3bd7NJ49RXDN
Hv/Iq9YYjmZ9GTatxnx7lWtmXnZXC5he1yn1JAuz/yt7/0b/Wx+Mu/wEpBXYNFTd
1AZdD586i+AmPo3yDkqH9nBu8JC0W0AnS9VZma4LVvZOP2UfJmj5Im1CLHItbGDN
FnUCkwyD/lJUUk+WgT+w/GOMJgmFHDiFFl4tFtYVVjrUirpCFVguSKG9xuv6tT8P
8iRsoP7RrcmDN9ojN2SEHwcpsAv3HnKkDv+9+GIbWnrGsSbCPq8Qm+JDSvf4h22I
K5lwNpJrcpSKI+q10L7w2xliTBwb98sJkWGA/rssomrdBOWteGZAyqFRYAVgQ+mJ
x/nJurIqQYh2KQN9+uLG
=xVV2
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This provides new data structures to hold "lease" information about
drm mode setting objects, and provides for creating new drm_masters
which have access to a subset of the available drm resources.
An 'owner' is a drm_master which is not leasing the objects from
another drm_master, and hence 'owns' them.
A 'lessee' is a drm_master which is leasing objects from some other
drm_master. Each lessee holds the set of objects which it is leasing
from the lessor.
A 'lessor' is a drm_master which is leasing objects to another
drm_master. This is the same as the owner in the current code.
The set of objects any drm_master 'controls' is limited to the set of
objects it leases (for lessees) or all objects (for owners).
Objects not controlled by a drm_master cannot be modified through the
various state manipulating ioctls, and any state reported back to user
space will be edited to make them appear idle and/or unusable. For
instance, connectors always report 'disconnected', while encoders
report no possible crtcs or clones.
The full list of lessees leasing objects from an owner (either
directly, or indirectly through another lessee), can be searched from
an idr in the drm_master of the owner.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* Sub-leasing has been disabled.
* BUG_ON for lock checking replaced with lockdep_assert_held
* 'change' ioctl has been removed.
* Leased objects can always be controlled by the lessor; the
'mask_lease' flag has been removed
* Checking for leased status has been simplified, replacing
the drm_lease_check function with drm_lease_held.
Changes in v3, some suggested by Dave Airlie <airlied@gmail.com>
* Add revocation. This allows leases to be effectively revoked by
removing all of the objects they have access to. The lease itself
hangs around as it's hanging off a file.
* Free the leases IDR when the master is destroyed
* _drm_lease_held should look at lessees, not lessor
* Allow non-master files to check for lease status
Changes in v4, suggested by Dave Airlie <airlied@gmail.com>
* Formatting and whitespace changes
Changes in v5 (airlied)
* check DRIVER_MODESET before lease destroy call
* check DRIVER_MODESET for lease revoke (Chris)
* Use idr_mutex uniformly for all lease elements of struct drm_master. (Keith)
Signed-off-by: Keith Packard <keithp@keithp.com>
First feature pull for 4.15. Highlights:
- Per VM BO support
- Lots of powerplay cleanups
- Powerplay support for CI
- pasid mgr for kfd
- interrupt infrastructure for recoverable page faults
- SR-IOV fixes
- initial GPU reset for vega10
- prime mmap support
- ttm page table debugging improvements
- lots of bug fixes
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (232 commits)
drm/amdgpu: clarify license in amdgpu_trace_points.c
drm/amdgpu: Add gem_prime_mmap support
drm/amd/powerplay: delete dead code in smumgr
drm/amd/powerplay: delete SMUM_FIELD_MASK
drm/amd/powerplay: delete SMUM_WAIT_INDIRECT_FIELD
drm/amd/powerplay: delete SMUM_READ_FIELD
drm/amd/powerplay: delete SMUM_SET_FIELD
drm/amd/powerplay: delete SMUM_READ_VFPF_INDIRECT_FIELD
drm/amd/powerplay: delete SMUM_WRITE_VFPF_INDIRECT_FIELD
drm/amd/powerplay: delete SMUM_WRITE_FIELD
drm/amd/powerplay: delete SMU_WRITE_INDIRECT_FIELD
drm/amd/powerplay: move macros to hwmgr.h
drm/amd/powerplay: move PHM_WAIT_VFPF_INDIRECT_FIELD to hwmgr.h
drm/amd/powerplay: move SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL to hwmgr.h
drm/amd/powerplay: move SMUM_WAIT_INDIRECT_FIELD_UNEQUAL to hwmgr.h
drm/amd/powerplay: add new helper functions in hwmgr.h
drm/amd/powerplay: use SMU_IND_INDEX/DATA_11 pair
drm/amd/powerplay: refine powerplay code.
drm/amd/powerplay: delete dead code in hwmgr.h
drm/amd/powerplay: refine interface in struct pp_smumgr_func
...
This adds a statically sized closed hash table implementation with
low memory and CPU overhead. The API is inspired by kfifo.
Storing, retrieving and deleting data does not involve any dynamic
memory management, which makes it ideal for use in interrupt context.
Static memory usage per entry comprises a 32 or 64 bit hash key, two
bits for occupancy tracking and the value size stored in the table.
No list heads or pointers are needed. Therefore this data structure
should be quite cache-friendly, too.
It uses linear probing and lazy deletion. During lookups free space
is reclaimed and entries relocated to speed up future lookups.
v2: squash in do_div and _BITOPS_LONG_SHIFT fixes
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle debugfs override edid and firmware edid at the low level to
transparently and completely replace the real edid. Previously, we
practically only used the modes from the override EDID, and none of the
other data, such as audio parameters.
This change also prevents actual EDID reads when the EDID is to be
overridden, but retains the DDC probe. This is useful if the reason for
preferring override EDID are problems with reading the data, or
corruption of the data.
Move firmware EDID loading from helper to core, as the functionality
moves to lower level as well. This will result in a change of module
parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which
arguably makes more sense anyway.
Some future work remains related to override and firmware EDID
validation. Like before, no validation is done for override EDID. The
firmware EDID is validated separately in the loader. Some unification
and deduplication would be in order, to validate all of them at the
drm_do_get_edid() level, like "real" EDIDs.
v2: move firmware loading to core
v3: rebase, commit message refresh
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8a710bcac46e5136c1a7b430074893c81f364a.1505203831.git.jani.nikula@intel.com
The header comment in include/trace/define_trace.h specifies that the
TRACE_INCLUDE_PATH needs to be relative to the define_trace.h header
rather than the trace file including it. Most instances get that wrong
and work around it by adding the $(src) directory to the include path.
While this works, it is preferable to refer to the correct path to the
trace file in the first place and avoid any workaround.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901144954.19620-1-thierry.reding@gmail.com
This adds a new DRM driver for the Faraday Technology TVE200
block. This "TV Encoder" encodes a ITU-T BT.656 stream and can
be found in the StorLink SL3516 (later Cortina Systems CS3516)
as well as the Grain Media GM8180.
I do not have definitive word from anyone at Faraday that this
IP block is theirs, but it bears the hallmark of their 3-digit
version code (200) and is used in two SoCs from completely
different companies. (Grain Media was fully owned by Faraday
until it was transferred to NovoTek this january, and
Faraday did lots of work on the StorLink SoCs.)
The D-Link DIR-685 uses this in connection with the Ilitek
ILI9322 panel driver that supports BT.656 input, while the
GM8180 apparently has been used with the Cirrus Logic CS4954
digital video encoder. The oldest user seems to be
something called Techwall 2835.
This driver is heavily inspired by Eric Anholt's PL111
driver and therefore I have mentioned all the ancestor authors
in the header file.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170820100557.24991-2-linus.walleij@linaro.org
This library provides helpers for drivers that don't subclass
drm_framebuffer and are backed by drm_gem_object. The code is
taken from drm_fb_cma_helper.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-2-git-send-email-noralf@tronnes.org
Sync objects are new toplevel drm object, that contain a
pointer to a fence. This fence can be updated via command
submission ioctls via drivers.
There is also a generic wait obj API modelled on the vulkan
wait API (with code modelled on some amdgpu code).
These objects can be converted to an opaque fd that can be
passes between processes.
v2: rename reference/unreference to put/get (Chris)
fix leaked reference (David Zhou)
drop mutex in favour of cmpxchg (Chris)
v3: cleanups from danvet, rebase on drm_fops rename
check fd_flags is 0 in ioctls.
v4: export find/free, change replace fence to take a
syncobj. In order to support lookup first, replace
later semantics which seem in the end to be cleaner.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes the following depmod error when building drm as a module:
depmod: ERROR: Found 6 modules in dependency cycles!
depmod: ERROR: Cycle detected: drm -> drm_kms_helper -> drm
Fixes: 13dfc0540a ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.")
Tested-by: Lofstedt, Marta <marta.lofstedt@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/3fd262cf-1db6-4335-320c-af92f9014502@linux.intel.com
Many DRM drivers have common code to make a stub connector
implementation that wraps a drm_panel. By wrapping the panel in a DRM
bridge, all of the connector code (including calls during encoder
enable/disable) goes away.
v2: Fix build with CONFIG_DRM=m, drop "dev" argument that should just
be the panel's dev, move kerneldoc up a level and document
_remove().
v3: Fix another breakage with CONFIG_DRM=m, fix breakage with
CONFIG_OF=n, move protos under CONFIG_DRM_PANEL_BRIDGE, wrap a
line.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> (v2)
Acked-by: Archit Taneja <architt@codeaurora.org> (v2)
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170602202514.11900-1-eric@anholt.net
drm_irq.c contains both the irq helper library (optional) and the
vblank support (optional, but part of the modeset uapi, and doesn't
require the use of the irq helpers at all.
Split this up for more clarity of the scope of the individual bits.
v2: Move misplaced hunks to this patch (Stefan).
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531092146.12528-1-daniel.vetter@ffwll.ch
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
This controller provides output signals to interface directly a variety
of LCD and TFT panels. These output signals are: RGB signals
(up to 24bpp), vertical & horizontal synchronisations, data enable and
the pixel clock.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-5-git-send-email-yannick.fertre@st.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
SCDC is a mechanism defined in the HDMI 2.0 specification that allows
the source and sink devices to communicate.
This commit introduces helpers to access the SCDC and provides the
symbolic names for the various registers defined in the specification.
V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Addressed review comments from Ville
- Handle the I2c return values in a better way (dp_dual_mode)
- Make the macros for SCDC Major/Minor more readable, by adding
a 'GET' in the macro names
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-2-git-send-email-shashank.sharma@intel.com
Merge Laurent's drm_platform removal code. Only conflict is with the
drm_pci.h extraction, which allows me to fix up the misplayed
drm_platform_init fumble that 0day and Stephen Rothwell reported.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
tinydrm provides helpers for very simple displays that can use
CMA backed framebuffers and need flushing on changes.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thierry Reding <treding@nvidia.com>
Now that the last driver has been converted, the drm_platform midlayer
is unused. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch
Reviewed-by: Sean Paul <seanpaul@chromium.org>
drm_vm.c functions are only need for DRM_LEGACY and DRM_NOUVEAU.
Use a new DRM_VM to define when drm_vm.c in needed.
stub drm_legacy_vma_flush() to avoid compilation issues
version 4:
- a "config DRM_VM" in Kconfig
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
[danvet: Fix conflict.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Kbuild really doesn't like non-recursive Makefiles, but they do work
as long as you build without O=
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 50f0033d1a ("drm: Add some kselftests for the DRM range manager (struct drm_mm)")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482918077-30027-1-git-send-email-daniel.vetter@ffwll.ch
First we introduce a smattering of infrastructure for writing selftests.
The idea is that we have a test module that exercises a particular
portion of the exported API, and that module provides a set of tests
that can either be run as an ensemble via kselftest or individually via
an igt harness (in this case igt/drm_mm). To accommodate selecting
individual tests, we export a boolean parameter to control selection of
each test - that is hidden inside a bunch of reusable boilerplate macros
to keep writing the tests simple.
v2: Choose a random random_seed unless one is specified by the user.
v3: More parameters to control max_iterations and max_prime of the
tests.
Testcase: igt/drm_mm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-7-chris@chris-wilson.co.uk
When testing, we want a random but yet reproducible order in which to
process elements. Here we create an array which is a random (using the
Tausworthe PRNG) permutation of the order in which to execute.
Note these are simple helpers intended to be merged upstream in lib/
v2: Tidier code by David Herrmann
v3: Add reminder that this code is intended to be temporary, with at
least the bulk of the prandom changes going to lib/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-6-chris@chris-wilson.co.uk
Add new driver for the MXSFB controller found in i.MX23/28/6SX .
The MXSFB controller is a simple framebuffer controller with one
parallel LCD output. Unlike the MXSFB fbdev driver that is used
on these systems now, this driver uses the DRM/KMS framework.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
The Amlogic Meson Display controller is composed of several components :
DMC|---------------VPU (Video Processing Unit)----------------|------HHI------|
| vd1 _______ _____________ _________________ | |
D |-------| |----| | | | | HDMI PLL |
D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK |
R |-------| |----| Processing | | | | |
| osd2 | | | |---| Enci ----------|----|-----VDAC------|
R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----|
A | osd1 | | | Blenders | | Encl ----------|----|---------------|
M |-------|______|----|____________| |________________| | |
___|__________________________________________________________|_______________|
VIU: Video Input Unit
---------------------
The Video Input Unit is in charge of the pixel scanout from the DDR memory.
It fetches the frames addresses, stride and parameters from the "Canvas" memory.
This part is also in charge of the CSC (Colorspace Conversion).
It can handle 2 OSD Planes and 2 Video Planes.
VPP: Video Post Processing
--------------------------
The Video Post Processing is in charge of the scaling and blending of the
various planes into a single pixel stream.
There is a special "pre-blending" used by the video planes with a dedicated
scaler and a "post-blending" to merge with the OSD Planes.
The OSD planes also have a dedicated scaler for one of the OSD.
VENC: Video Encoders
--------------------
The VENC is composed of the multiple pixel encoders :
- ENCI : Interlace Video encoder for CVBS and Interlace HDMI
- ENCP : Progressive Video Encoder for HDMI
- ENCL : LCD LVDS Encoder
The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock
tree and provides the scanout clock to the VPP and VIU.
The ENCI is connected to a single VDAC for Composite Output.
The ENCI and ENCP are connected to an on-chip HDMI Transceiver.
This driver is a DRM/KMS driver using the following DRM components :
- GEM-CMA
- PRIME-CMA
- Atomic Modesetting
- FBDev-CMA
For the following SoCs :
- GXBB Family (S905)
- GXL Family (S905X, S905D)
- GXM Family (S912)
The current driver only supports the CVBS PAL/NTSC output modes, but the
CRTC/Planes management should support bigger modes.
But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in
a second time.
The Device Tree bindings makes use of the endpoints video interface definitions
to connect to the optional CVBS and in the future the HDMI Connector nodes.
HDMI Support is planned for a next release.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
And shuffle the kernel-doc structure a bit since drm_crtc.[hc] now
only contains CRTC-related functions and structures.
v2:
- rebase onto drm-misc
- don't forget to move drm_mode_config_cleanup.
- move 2 internal decls under the right heading (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This is the initial ZTE VOU display controller DRM/KMS driver. There
are still some features to be added, like overlay plane, scaling, and
more output devices support. But it's already useful with dual CRTCs
and HDMI display working.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYH++oAAoJEFBXWFqHsHzOlCQIAKLNtBmB2OSChdPRCa7tIG7O
vtjUwze70QtD6vVe+rs0fvc46PM3qrccJI6bcgzveki+vRvFVDlreydmB18g3bMx
cBbsByGnWrNWDtKrwvvRWrkDQwcxnSVX5lMWeIvLrPHeXQVb4nf0F2cn7/zEfIek
G55LHonRD28m66tWb87gaWwisowcaPzA3tAEP4Rifdqg9IQ45He7Po6KZWZU4DQq
M/RltIHQwt/OFxAnDuz18ecf+o0NXuLoMYmoA8EYdOTV3sJ2hiJQFWaL5qmXKl7C
Nzlql70txu9B9H5R4V/6MXS21J0H2uGs2Aig9l9Brz2Vn774IBX09Wi8Fo8G8VU=
=+zjh
-----END PGP SIGNATURE-----
Merge tag 'zxdrm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next
ZTE zxdrm driver support for 4.10:
This is the initial ZTE VOU display controller DRM/KMS driver. There
are still some features to be added, like overlay plane, scaling, and
more output devices support. But it's already useful with dual CRTCs
and HDMI display working.
[airlied: use drm_format_plane_cpp instead of legacy api]
* tag 'zxdrm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
MAINTAINERS: add an entry for ZTE ZX DRM driver
drm: zte: add initial vou drm driver
dt-bindings: add bindings doc for ZTE VOU display controller
It adds the initial ZTE VOU display controller DRM driver. There are
still some features to be added, like overlay plane, scaling, and more
output devices support. But it's already useful with dual CRTCs and
HDMI monitor working.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Adds files and directories to debugfs for controlling and reading frame
CRCs, per CRTC:
dri/0/crtc-0/crc
dri/0/crtc-0/crc/control
dri/0/crtc-0/crc/data
Drivers can implement the set_crc_source callback() in drm_crtc_funcs to
start and stop generating frame CRCs and can add entries to the output
by calling drm_crtc_add_crc_entry.
v2:
- Lots of good fixes suggested by Thierry.
- Added documentation.
- Changed the debugfs layout.
- Moved to allocate the entries circular queue once when frame
generation gets enabled for the first time.
v3:
- Use the control file just to select the source, and start and stop
capture when the data file is opened and closed, respectively.
- Make variable the number of CRC values per entry, per source.
- Allocate entries queue each time we start capturing as now there
isn't a fixed number of CRC values per entry.
- Store the frame counter in the data file as a 8-digit hex number.
- For sources that cannot provide useful frame numbers, place
XXXXXXXX in the frame field.
v4:
- Build only if CONFIG_DEBUG_FS is enabled.
- Use memdup_user_nul.
- Consolidate calculation of the size of an entry in a helper.
- Add 0x prefix to hex numbers in the data file.
- Remove unnecessary snprintf and strlen usage in read callback.
v5:
- Made the crcs array in drm_crtc_crc_entry fixed-size
- Lots of other smaller improvements suggested by Emil Velikov
v7:
- Move definition of drm_debugfs_crtc_crc_add to drm_internal.h
v8:
- Call debugfs_remove_recursive when we fail to create the minor
device
v9:
- Register the debugfs directory for a crtc from
drm_crtc_register_all()
v10:
- Don't let debugfs failures interrupt CRTC registration (Emil
Velikov)
v11:
- Remove extra brace that broke compilation. Sorry!
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475767268-14379-3-git-send-email-tomeu.vizoso@collabora.com
For both the new degamm/lut/gamma atomic combo, and the old legacy
gamma tables.
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474448370-32227-5-git-send-email-daniel.vetter@ffwll.ch
Just pure code movement, cleanup and polish will happen in later
patches.
v2: Don't forget all the ioctl! To extract those cleanly I decided to
put check_src_coords into drm_framebuffer.c (and give it a
drm_framebuffer_ prefix), since that just checks framebuffer
constraints.
v3: rebase over PAGE_FLIP_TARGET.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[seanpaul]
This patch as posted on the list was rebased on:
commit 6f00975c61
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Aug 20 12:22:11 2016 +0200
drm: Reject page_flip for !DRIVER_MODESET
so as a result of moving the page_flip ioctl, this fix has
been rolled into this patch.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
More -misc stuff
- moar drm_crtc.c split up&documentation
- some fixes for the simple kms helpers (Andrea)
- I included all the dri1 patches from David - we're not removing any code
or drivers, and it seems to have worked as a wake-up call to motivate a
few more people to upstream kms conversions for these. Feel free to
revert if you disagree strongly.
- a few other single patches
* tag 'topic/drm-misc-2016-08-31' of git://anongit.freedesktop.org/drm-intel: (24 commits)
drm: drm_probe_helper: Fix output_poll_work scheduling
drm: bridge/dw-hdmi: Fix colorspace and scan information registers values
drm/doc: Polish docs for drm_property&drm_property_blob
drm: Unify handling of blob and object properties
drm: Extract drm_property.[hc]
drm: move drm_mode_legacy_fb_format to drm_fourcc.c
drm/doc: Polish docs for drm_mode_object
drm: Remove drm_mode_object->atomic_count
drm: Extract drm_mode_object.[hc]
drm/doc: Polish kerneldoc for encoders
drm: Extract drm_encoder.[hc]
drm/fb-helper: don't call remove_conflicting_framebuffers for FB=m && DRM=y
drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commit
drm/atomic-helper: Disable appropriate planes in disable_planes_on_crtc()
drm/atomic-helper: Add atomic_disable CRTC helper callback
drm: simple_kms_helper: add support for bridges
drm: simple_kms_helper: make connector optional at init time
drm/bridge: introduce bridge detaching mechanism
drm/simple-helpers: Always add planes to the state update
drm: reduce GETCLIENT to a minimum
...
This just contains the base property classes and all the code to
handle blobs. I think for any kind of standardized/shared properties
it's better to have separate files - this is fairly big already as-is.
v2: resurrect misplaced hunk (Daniel Stone)
Cc: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829082757.17913-7-daniel.vetter@ffwll.ch
Just for the struct drm_mode_object base class. The header file was
already partially extracted to help untangle the include loops.
v2:
- Also move the generic get/set property ioctls. At first this seemed
like a bad idea since it requires making drm_mode_crtc_set_obj_prop
non-static. But eventually that will get split away too (like
the connector version already is) for both crtc and planes. Hence I
reconsidered.
- drm_mode_object.[hc] instead of drm_modeset.[hc], which requires
renaming the drm_modeset.h header I already started building up.
This is more consistent (matches the name of the main structure),
and I want to be able to use drm_modeset.[hc] for the basic modeset
init/cleanup functionality like drm_mode_config_init.
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829082757.17913-3-daniel.vetter@ffwll.ch
Same treatment as before. Only hiccup is drm_crtc_mask, which
unfortunately can't be resolved until drm_crtc.h is less of a monster.
Untangle the header loop with a forward declaration for that static
inline.
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829082757.17913-1-daniel.vetter@ffwll.ch
drm-intel-next-2016-08-22:
- bugfixes and cleanups for rcu-protected requests (Chris)
- atomic modeset fixes for gpu reset on pre-g4x (Maarten&Ville)
- guc submission improvements (Dave Gordon)
- panel power sequence cleanup (Imre)
- better use of stolen and unmappable ggtt (Chris), plus prep work to make that
happen
- rework of framebuffer offsets, prep for multi-plane framebuffers (Ville)
- fully partial ggtt vmaps, including fenced ones (Chris)
- move lots more of the gem tracking from the object to the vma (Chris)
- tune the command parser (Chris)
- allow fbc without fences on recent platforms (Chris)
- fbc frontbuffer tracking fixes (Chris)
- fast prefaulting using io-mappping.h pgprot caching (Chris)
* 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel: (141 commits)
io-mapping: Fixup for different names of writecombine
io-mapping.h: s/PAGE_KERNEL_IO/PAGE_KERNEL/
drm/i915: Update DRIVER_DATE to 20160822
drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass
drm/i915: Embed the io-mapping struct inside drm_i915_private
io-mapping: Always create a struct to hold metadata about the io-mapping
drm/i915/fbc: Allow on unfenced surfaces, for recent gen
drm/i915/fbc: Don't set an illegal fence if unfenced
drm/i915: Flush delayed fence releases after reset
drm/i915: Reattach comment, complete type specification
drm/i915/cmdparser: Accelerate copies from WC memory
drm/i915/cmdparser: Use binary search for faster register lookup
drm/i915/cmdparser: Check for SKIP descriptors first
drm/i915/cmdparser: Compare against the previous command descriptor
drm/i915/cmdparser: Improve hash function
drm/i915/cmdparser: Only cache the dst vmap
drm/i915/cmdparser: Use cached vmappings
drm/i915/cmdparser: Add the TIMESTAMP register for the other engines
drm/i915/cmdparser: Make initialisation failure non-fatal
drm/i915: Stop discarding GTT cache-domain on unbind vma
...
Very old numbers indicate this is a 66% improvement when remapping the
entire object for fence contention - due to the elimination of
track_pfn_insert and its strcmp.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Testcase: igt/gem_fence_upload/performance
Testcase: igt/gem_mmap_gtt
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160819155428.1670-6-chris@chris-wilson.co.uk
There's not much point in kerneldoc if it's not included:
- It won't show up in the pretty html pages.
- The comments itself won't get parsed, which means 0day won't pick up
changes, resulting in stale docs fast.
Also, uapi really should be core, not helpers, so move drm_blend.c to
that. That also means that the zpos normilize function loses it's
helper status (and we might as well call it always). For that,
EXPORT_SYMBOL. Just spotted while integrating docs and noticing that
one was missing.
With sphinx there's really no excuse any more to not build the docs
and make sure it's all nice!
$ make DOCBOOKS="" htmldocs
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-15-git-send-email-daniel.vetter@ffwll.ch
Pulls in quite a lot of connector related structures (cmdline mode,
force/status enums, display info), but I think that all makes perfect
sense.
Also had to move a few more core kms object stuff into drm_modeset.h.
And as a first cleanup remove the kerneldoc for the 2 connector IOCTL
- DRM core docs are aimed at drivers, no point documenting internal in
excruciating detail.
v2: And also pull in all the connector property code.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-14-git-send-email-daniel.vetter@ffwll.ch
Also start with drm_modeset.h with the core bits, since we need
to untangle this mess somehow. That allows us to move the drm_modes.h
include to the right spot, except for the temporary connector status
enum. That will get fixed as soon as drm_connector.h exists.
v2: Rebase.
v3: Move drm_crtc_force_disable_all back again, that wasn't meant to
be moved (Sean).
v4: Rebase.
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
