The initial intent of releasing resources in the .remove does not work
well with HDaudio codecs. If the probe_continue() fails in a work
queue, e.g. due to missing firmware or authentication issues, we don't
release any resources, and as a result the kernel oopses during
suspend operations.
The suggested fix is to release all resources during errors in
probe_continue(), and use fw_state to track resource allocation
state, so that .remove does not attempt to release the same
hardware resources twice. PM operations are also modified so that
no action is done if DSP resources have been freed due to
an error at probe.
Reported-by: Takashi Iwai <tiwai@suse.de>
Co-developed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1161246
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200124213625.30186-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Add a state machine for FW boot to track the
different stages of FW boot and replace the boot_complete
field with fw_state field in struct snd_sof_dev.
This will be used to determine the actions to be performed
during system suspend.
One of the main motivations for adding this change is the
fact that errors during the top-level SOF device probe cannot
be propagated and therefore suspending the SOF device normally
during system suspend could potentially run into errors.
For example, with the current flow, if the FW boot failed
for some reason and the system suspends, the SOF device
suspend could fail because the CTX_SAVE IPC would be attempted
even though the FW never really booted successfully causing it
to time out. Another scenario that the state machine fixes
is when the runtime suspend for the SOF device fails and
the DSP is powered down nevertheless, the CTX_SAVE IPC during
system suspend would timeout because the DSP is already
powered down.
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191218002616.7652-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move all the audio-specific code in the core,
audio-specific logic in the top-level PM callbacks
and the core header files into a separate file
(sof-audio.*) in preparation for adding an
audio client device.
In the process of moving all structure definitions
for widget, routes, pcm's etc, the snd_sof_dev
member in all these structs is replaced with
the snd_soc_component member. Also, use the component
device instead of the snd_sof_dev device wherever
possible in the PCM component driver,
control IO functions and the topology parser as the
component device will be moved over to the client
device later on.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should suspend audio to D3 by default, for the sake of power saving,
change the condition of D0I3 suspending here to that when there is
stream with suspend_ignored specified.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111223343.19986-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add check before seeting d0_substate and return success if Audio DSP is
already in the target substate.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111223343.19986-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Audio DSP state machine with comments. Note that the
'D0<-->runtime D0I3' part is not implemented yet.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111223343.19986-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When system is entering into S0ix, the PCI device may transition to the
D0i3 substate instead of D3. In D0i3, some always-on functionality can
be enabled, such as acoustic event detection, voice activity detection
or hotwording. When an event is detected, the DSP firmware can wake-up
the device for a transition to D0 with an interrupt.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-26-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement the prepare() and complete() callbacks for power management,
initialize s0_suspend flag at prepare(), and reset it at complete().
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add snd_sof_set_d0_substate() helper for setting ADSP to a specific D0
substate, it will call into the platform specific implementation, and
update the d0_substate at success.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper sof_send_pm_ipc() is only suitable for context save/restore
IPCs' sending, so rename it to sof_send_pm_ctx_ipc here.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We initialize/reset d0_substate to default d0i0 value when doing
transition D3-->D0, e.g. at success of probing and resuming.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When application goes through SUSPEND/STOP->PREPARE->START
cycle, we should always reprogram the SOF device to start
DMA from a known state so that hw_ptr/appl_ptrs remain valid.
This is expected by ALSA core as it resets the buffer
state as part of prepare (see snd_pcm_do_prepare()).
Fix the issue by forcing reconfiguration of the FW with
STREAM_PCM_PARAMS in prepare(). Use combined logic to handle
prepare and the existing flow to reprogram hw-params after
system suspend.
Without the fix, first call to pcm pointer() will return
an invalid hw_ptr and application may immediately observe XRUN
status, unless "start_threshold" SW parameter is set to maximum
value by the application.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ability to implement a SOF device level runtime idle callback.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190702132428.13129-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Paused streams do not get suspended when the system enters S3.
So, clear and release link DMA channel for such streams in the
hda_dsp_set_hw_params_upon_resume() callback. Also, invalidate
the link DMA channel in the DAI config before restoring the
dai config upon resume. Also, modify the signature for the
set_hw_params_upon_resume() op to return an int.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the suspend flow, a context save IPC message is
sent to the firmware before powering down the DSP. If errors
are met, the suspend flow is aborted with current code.
Change the behaviour such that if firmware returns -EBUSY or
-EAGAIN, return the error codes to PM core as before. The device
is left in active state in this case.
If other errors are reported, print a warning but do not block the
suspend flow. As per interface specification, no valid error can be
returned in this scenario. If the hardware has hit a fatal error and
is not able to respond successfully, best recovery method is to
proceed with suspend and power off the DSP.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The prepare() ioctl for BE dai link gets called both
when the stream is started and when it is resumed from
suspend. SOF uses this ioctl to set the hw params
again only if the stream has been suspended.
When the stream is started, the hw_params ioctl gets called
before prepare() and hw_params is set for the BE dai link.
So the prepare call does not need to do anything further.
When the stream resumes after system suspend, SOF requires
that the hw_params be set again for the BE dai. In order
to determine which streams should set the hw params
during prepare(), an internal flag called "hw_params_upon_resume"
is introduced in struct sof_intel_hda_stream. The flag is set
for hda streams when the sof device suspends and is
cleared after hw_params is set.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for saving and restoring DSP context in D3 to host DDR.
The suspend callback includes: suspend all pcm's stream that are running,
send CTX_SAVE ipc, drop all ipc's, release trace dma and then
power off the DSP.
And the resume callback performs the following steps: load FW, run FW,
re-initialize trace, restore pipeline, restore the kcontrol values
and finally send the ctx restore ipc to the dsp.
The streams that are suspended are resumed by the ALSA resume trigger.
If the streams are paused during system suspend, they are marked
explicitly so they can be restored during PAUSE_RELEASE.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
