Inherit workarounds from previous platforms that are still valid for
Icelake.
v2: GEN7_ROW_CHICKEN2 is masked
v3:
- Since it has been fixed already in upstream, removed the TODO
comment about WA_SET_BIT for WaInPlaceDecompressionHang.
- Squashed with this patch:
drm/i915/icl: add icelake_init_clock_gating()
from Paulo Zanoni <paulo.r.zanoni@intel.com>
- Squashed with this patch:
drm/i915/icl: WaForceEnableNonCoherent
from Oscar Mateo <oscar.mateo@intel.com>
- WaPushConstantDereferenceHoldDisable is now Wa_1604370585 and
applies to B0 as well.
- WaPipeControlBefore3DStateSamplePattern WABB was being applied
to ICL incorrectly.
v4:
- Wrap the commit message
- s/dev_priv/p to please checkpatch
v5: Rebased on top of the WA refactoring
v6: Rebased on top of further whitelist registers refactoring (Michel)
v7: Added WaRsForcewakeAddDelayForAck
v8: s/ICL_HDC_CHICKEN0/ICL_HDC_MODE (Mika)
v9:
- C, not lisp (Chris)
- WaIncreaseDefaultTLBEntries is the same for GEN > 9_LP (Tvrtko)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-2-git-send-email-oscar.mateo@intel.com
This patch adds NV12 to list of supported formats for sprite plane.
v2: Rebased (me)
v3: Review comments by Ville addressed
- Removed skl_plane_formats_with_nv12 and added
NV12 case in existing skl_plane_formats
- Added the 10bpc RGB formats
v4: Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches?
Trying to set XR30 or AB30 results in error returned even though
the modes are advertised for the planes"
- Removed 10bit RGB formats added previously with NV12 series
v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches?
Trying to set XR30 or AB30 results in error returned even though
the modes are advertised for the planes"
- Previous version has 10bit RGB format removed from VLV formats
by mistake. Fixing that in this version.
Removed 10bit RGB formats added previously with NV12 series
for SKL.
v6: Addressed review comments by Ville
Restricting the NV12 to BXT and PIPE A and B
v7: Rebased (me)
v8: Rebased (me)
Restricting NV12 changes to BXT and KBL
Restricting NV12 changes for plane 0 (overlay)
v9: Rebased (me)
v10: Addressed review comments from Maarten.
Adding NV12 to skl_plane_formats itself.
v11: Addressed review comments from Shashank Sharma
v12: Addressed review comments from Shashank Sharma
Made the condition in intel_sprite_plane_create
simple and easy to read as suggested.
v13: Adding reviewed by tag from Shashank Sharma
Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v14: Addressed review comments from Ville
Added skl_planar_formats to include NV12
and a check skl_plane_has_planar in sprite create
Added NV12 format to skl_mod_supported. These were
review comments from Kristian Høgsberg <hoegsberg@gmail.com>
v15: Added reviewed by from Juha-Pekka Heikkila
v16: Rebased the series
v17: Added all tiling under mod supported for NV12
Credits to Megha Aggarwal
v18: Added RB by Maarten and Kristian
v19: Addressed review comments from Maarten
Made modification to skl_mod_supported
Credits-to: Megha Aggarwal <megha.aggarwal@intel.com>
Credits-to: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-7-git-send-email-vidya.srinivas@intel.com
This patch adds NV12 to list of supported formats for
primary plane
v2: Rebased (Chandra Konduru)
v3: Rebased (me)
v4: Review comments by Ville addressed
Removed the skl_primary_formats_with_nv12 and
added NV12 case in existing skl_primary_formats
v5: Rebased (me)
v6: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
v7: Review comments by Ville addressed
Restricting the NV12 for BXT and on PIPE A and B
Rebased (me)
v8: Rebased (me)
Modified restricting the NV12 support for both BXT and KBL.
v9: Rebased (me)
v10: Addressed review comments from Maarten.
Adding NV12 inside skl_primary_formats itself.
v11: Adding Reviewed By tag from Shashank Sharma
v12: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v13: Addressed review comments from Ville
Added skl_pri_planar_formats to include NV12
and skl_plane_has_planar function to check for
NV12 support on plane. Added NV12 format to
skl_mod_supported. These were review comments
from Kristian Høgsberg <hoegsberg@gmail.com>
v14: Added reviewed by from Juha-Pekka Heikkila
v15: Rebased the series
v16: Added all tiling support under mod supported
for NV12. Credits to Megha Aggarwal
v17: Added RB by Maarten and Kristian
v18: Review comments from Maarten addressed -
Removing BROXTON support for NV12 due to WA826
v19: Addressed review comments from Maarten
Make changes to skl_mod_supported
Credits-to: Megha Aggarwal megha.aggarwal@intel.com
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-6-git-send-email-vidya.srinivas@intel.com
This patch adds NV12 as supported format
to intel_framebuffer_init and performs various checks.
v2:
-Fix an issue in checks added (Chandra Konduru)
v3: rebased (me)
v4: Review comments by Ville addressed
Added platform check for NV12 in intel_framebuffer_init
Removed offset checks for NV12 case
v5: Addressed review comments by Clinton A Taylor
This NV12 support only correctly works on SKL.
Plane color space conversion is different on GLK and later platforms
causing the colors to display incorrectly.
Ville's plane color space property patch series
in review will fix this issue.
- Restricted the NV12 case in intel_framebuffer_init to
SKL and BXT only.
v6: Rebased (me)
v7: Addressed review comments by Ville
Restricting the NV12 to BXT for now.
v8: Rebased (me)
Restricting the NV12 changes to BXT and KBL for now.
v9: Rebased (me)
v10: NV12 supported by all GEN >= 9.
Making this change in intel_framebuffer_init. This is
part of addressing Maarten's review comments.
Comment under v8 no longer applicable
v11: Addressed review comments from Shashank Sharma
v12: Adding Reviewed By from Shashank Sharma
v13: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v14: Addressed review comments from Maarten.
Add checks for fb width height for NV12 and fail the fb
creation if check fails. Added reviewed by from
Juha-Pekka Heikkila
v15: Rebased the series
v16: Setting the minimum value during fb creating to 16
as per Bspec for NV12. Earlier minimum was expected
to be > 16. Now changed it to >=16.
v17: Adding restriction to framebuffer_init - the fb
width and height should be a multiplier of 4
v18: Added RB from Maarten. Included Maarten's review comments
Dont allow CCS formats for fb creation of NV12
v19: Review comments from Maarten addressed -
Removing BROXTON support for NV12 due to WA826
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-5-git-send-email-vidya.srinivas@intel.com
We skip src trunction/adjustments for
NV12 case and handle the sizes directly.
Without this, pipe fifo underruns are seen on APL/KBL.
v2: For NV12, making the src coordinates multiplier of 4
v3: Moving all the src coords handling code for NV12
to skl_check_nv12_surface
v4: Added RB from Mika
v5: Rebased the series. Removed checks of mult of 4 in
skl_update_scaler, Added NV12 condition in intel_check_sprite_plane
where src x/w is being checked for mult of 2 for yuv planes.
v6: Made changes to skl_check_nv12_surface as per WA#1106
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-4-git-send-email-vidya.srinivas@intel.com
Possible hang with NV12 plane surface formats.
WA: When the plane source pixel format is NV12,
the CHICKEN_PIPESL_* register bit 22 must be set to 1
and the render decompression must not be enabled
on any of the planes in that pipe.
v2: removed unnecessary POSTING_READ
v3: Added RB from Maarten
v4: Removed support for NV12 for BROXTON
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-3-git-send-email-vidya.srinivas@intel.com
The workaround was applied only to the primary plane, but is required
on all planes. Iterate over all planes in the crtc atomic check to see
if the workaround is enabled, and only perform the actual toggling in
the pre/post plane update functions.
Changes since v1:
- Track active NV12 planes in a nv12_planes bitmask. (Ville)
v2: Removing BROXTON support for NV12 due to WA826
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-2-git-send-email-vidya.srinivas@intel.com
Driver features data block has a boolean flag for PSR, use this to decide
whether PSR should be enabled on a platform. The module parameter can
still be used to override this.
Note: The feature currently remains disabled by default for all platforms
irrespective of what VBT says.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509003524.3199-1-dhinakaran.pandiyan@intel.com
Prepare to allow the GuC submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-2-chris@chris-wilson.co.uk
Prepare to allow the execlists submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-1-chris@chris-wilson.co.uk
In igt_flush_test() we try to switch back to the kernel context, but we
are only able to do so when we are called with struct_mutex held.
More of my CI fallout from lockdep being temporarily suppressed :(
Fixes: 4cdf65ce8c ("drm/i915/selftests: Return to kernel context after each test")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509065926.19207-1-chris@chris-wilson.co.uk
Calling mock_engine() calls i915_timeline_init() and that requires
struct_mutex to be held as it adds itself to the global list of
timelines. This error was introduced by commit a89d1f921c ("drm/i915:
Split i915_gem_timeline into individual timelines") but the issue was
masked in CI by the earlier lockdep spam.
Fixes: a89d1f921c ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508211056.17151-1-chris@chris-wilson.co.uk
The i915_flip* tracepoints are no longer in use since the removal of CS
flip in commit 8b5d27b911 ("drm/i915: Remove intel_flip_work
infrastructure")
References: 8b5d27b911 ("drm/i915: Remove intel_flip_work infrastructure")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508151552.31024-1-chris@chris-wilson.co.uk
During request submission, we call the engine->schedule() function so
that we may reorder the active requests as required for inheriting the
new request's priority. This may schedule several tasklets to run on the
local CPU, but we will need to schedule the tasklets again for the new
request. Delay all the local tasklets until the end, so that we only
have to process the queue just once.
v2: Beware PREEMPT_RCU, as then local_bh_disable() is then not a
superset of rcu_read_lock().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507135731.10587-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
When called from process context tasklet_schedule() defers itself to
ksoftirqd. From experience this may cause unacceptable latencies of over
200ms in executing the submission tasklet, our goal is to reprioritise
the HW execution queue and trigger HW preemption immediately, so disable
bh over the call to schedule and force the tasklet to run afterwards if
scheduled.
v2: Keep rcu_read_lock() around for PREEMPT_RCU
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507135731.10587-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
As we flush each test and wait for idle before the next, also switch
back to the kernel context. This helps limit the amount of collateral
damage a test may cause by resetting to the default state each time (and
also helps clean up temporaries used by the test).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508115312.12628-1-chris@chris-wilson.co.uk
Add some onion to populate_lr_context.
v2: prefer err_unpin_ctx
drop the fixes tag, worst case we just spew a warn before everything
is cleaned up and balance is restored
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301114639.510-1-matthew.auld@intel.com
igt_ctx_exec() expects that we retire all active requests/objects before
completing, so that when we clean up the files afterwards they are ready
to be freed. Before we do so, it is then prudent to ensure that we have
indeed retired the GPU activity, raising an error if it fails. If we do
not, we run the risk of triggering an assertion when freeing the object:
__i915_gem_free_objects:4793 GEM_BUG_ON(i915_gem_object_is_active(obj))
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180505091014.26126-2-chris@chris-wilson.co.uk
Operating on a zero sized GEM userptr object will lead to explosions.
Fixes: 5cc9ed4b9a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Testcase: igt/gem_userptr_blits/input-checking
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502195021.30900-1-matthew.auld@intel.com
When rescheduling a change of dependencies, they all need to be added to
the same priolist (at least the ones on the same engine!). Since we
likely want to move a batch of requests, keep the priolist around.
v2: Throw in an assert to catch trivial errors quickly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508003046.2633-2-chris@chris-wilson.co.uk
lookup_priolist() no longer attaches the request into the priolist, it
just returns the priolist for the given priority instead. Drop the
unused parameter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508003046.2633-1-chris@chris-wilson.co.uk
Unsafe module parameters are just that, unsafe. If the user is foolish
enough to try them and the kernel breaks, they get to keep both pieces.
Don't ask them to file a bug report if they broke it themselves.
References: https://bugs.freedesktop.org/show_bug.cgi?id=106423
Fixes: d15d7538c6 ("drm/i915: Tune down init error message due to failure injection")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180506183147.2690-1-chris@chris-wilson.co.uk
This implements the "MG PLL Programming" sequence from our spec. The
biggest problem was that the spec assumes real numbers, so we had to
adjust some numbers and calculations due to the fact that the Kernel
prefers to deal with integers.
I recommend grabbing some coffee, a pen and paper before reviewing
this patch.
v2:
- Correctly identify DP encoders after upstream change.
- Small checkpatch issues.
- Rebase.
v3:
- Try to impove the comment on the tdc_targetcnt calculation based on
Manasi's feedback (Manasi).
- Rebase.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-7-paulo.r.zanoni@intel.com
HDMI mode DPLL programming on ICL is the same as CNL, so just reuse
the CNL code.
v2:
- Properly detect HDMI crtcs.
- Rebase after changes to the cnl function (clock * 1000).
v3:
- Add a comment to clarify why we treat 38.4 as 19.2 (James).
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-5-paulo.r.zanoni@intel.com
This commit introduces the definitions for the ICL clocks and adds the
basic functions to the shared DPLL framework. It adds code for the
Enable and Disable sequences for some PLLs, but it does not have the
code to compute the actual PLL values, which are marked as TODO
comments and should be introduced as separate commits.
Special thanks to James Ausmus for investigating and fixing a bug with
the placement of icl_unmap_plls_to_ports() function.
v2:
- Rebase around dpll_lock changes.
v3:
- The spec now says what the timeouts should be.
- Touch DPCLKA_CFGCR0_ICL at the appropriate time so we don't freeze
the machine.
- Checkpatch found a white space problem.
- Small adjustments before upstreaming.
v4:
- Move the ICL checks out of the *map_plls_to_ports() functions
(James)
- Add extra encoder check (James)
- Call icl_unmap_plls_to_ports() later (James)
v5:
- Rebase after the pll struct changes.
v6:
- Properly make the unmap function based on encoders_post_disable()
with regarding to checks and iterators.
- Address checkpatch comment on "min = max = x()".
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427231436.9353-1-paulo.r.zanoni@intel.com
Add documentation to gen9_set_dc_state() on what enabling a given DC
state means and at what point HW/DMC actually enters/exits these states.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417113147.25120-1-imre.deak@intel.com
Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to
power on` in kernel log at boot time.
Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power
on its screen during Intel i915 DRM initialization. This currently
results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for
panel to power on` message appearing in the kernel log during boot
time and when stopping the machine.
This change increases the timeout of the `intel_enable_lvds` function
from 1 to 5 seconds, letting enough time for the Satellite 930 LCD
screen to power on, and suppressing the error message from the kernel
log.
This patch has been successfully tested on Linux 4.14 running on a
Toshiba Satellite Z930.
[vsyrjala: bump the timeout from 2 to 5 seconds to match the DP
code and properly cover the max hw timeout of ~4 seconds, and
drop the comment about the specific machine since this is not
a particulary surprising issue, nor specific to that one machine]
Signed-off-by: Florent Flament <contact@florentflament.com>
Cc: stable@vger.kernel.org
Cc: Pavel Petrovic <ppetrovic@acm.org>
Cc: Sérgio M. Basto <sergio@serjux.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414
References: https://bugzilla.kernel.org/show_bug.cgi?id=57591
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
It is useful to see the priority as requests are coming in and completed
status as requests are coming out of the GPU.
To achieve this in a more readable way we need to abandon the common
request_hw tracepoint class.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504115643.22437-1-tvrtko.ursulin@linux.intel.com
Following commit f773568b6f ("drm/i915: nuke the duplicated stolen
discovery"), the if-else-chain for determining the GTT size is redundant
with the !chv branches all being the same.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: f773568b6f ("drm/i915: nuke the duplicated stolen discovery")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503212956.3948-1-chris@chris-wilson.co.uk
Limit the arbitration (where preemption may occur) to inside the batch,
and prevent it from happening on the pipecontrols/flushes we use to
write the breadcrumb seqno. Once the user batch is complete, we have
nothing left to do but serialise and emit the breadcrumb; switching
contexts at this point is futile so don't.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195416.22498-1-chris@chris-wilson.co.uk
Don't pre-emptively retire the oldest request in our ring's list if it
is the only request. We keep various bits of state alive using the
active reference from the request and would rather transfer that state
over to a new request rather than the more involved process of retiring
and reacquiring it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195115.22309-2-chris@chris-wilson.co.uk
When userspace is passing around swapbuffers using DRI, we frequently
have to open and close the same object in the foreign address space.
This shows itself as the same object being rebound at roughly 30fps
(with a second object also being rebound at 30fps), which involves us
having to rewrite the page tables and maintain the drm_mm range manager
every time.
However, since the object still exists and it is only the local handle
that disappears, if we are lazy and do not unbind the VMA immediately
when the local user closes the object but defer it until the GPU is
idle, then we can reuse the same VMA binding. We still have to be
careful to mark the handle and lookup tables as closed to maintain the
uABI, just allowing the underlying VMA to be resurrected if the user is
able to access the same object from the same context again.
If the object itself is destroyed (neither userspace keeping a handle to
it), the VMA will be reaped immediately as usual.
In the future, this will be even more useful as instantiating a new VMA
for use on the GPU will become heavier. A nuisance indeed, so nip it in
the bud.
v2: s/__i915_vma_final_close/i915_vma_destroy/ etc.
v3: Leave a hint as to why we deferred the unbind on close.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195115.22309-1-chris@chris-wilson.co.uk
In Icelake, there are more engines on which Memory Object Control
States need to be configured. Besides adding Icelake under Skylake
config, the patch makes sure MOCS register addresses for the new
engines are properly defined.
Additional patch might be need later, in case the specification will
propose different MOCS config values for Icelake than in previous
gens.
v2: Restricted comments to gen11, updated description, renamed
defines.
v3: Used proper engine indexes for gen11.
v4: Ensure patch is Icelake only.
v5: Style fixes (proposed by mwajdeczko)
v6 (from Paulo): fix checkpatch's COMMIT_LOG_LONG_LINE (Checkpatch).
BSpec: 19405
BSpec: 21140
Cc: Oscar Mateo Lozano <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502223142.3891-1-paulo.r.zanoni@intel.com
During state readout we first read out the pipe src size, store
that information in the user mode h/vdisplay, but later on we overwrite
that with the actual crtc timings. That makes our read out crtc state
inconsistent with itself when the BIOS has enabled the panel fitter to
scale the pipe contents. Let's preserve the pipe src size based
information in the user mode to make things consistent again.
This fixes a problem introduced by commit a2936e3d9a ("drm/i915:
Use drm_mode_get_hv_timing() to populate plane clip rectangle")
where the inconsistent state is now leading the plane clipping code
to report a failure on account the plane dst coordinates not matching
the user mode size. Previously we did the plane clipping based on
the pipe src size instead and thus never noticed the inconsistency.
The failure manifests as a WARN:
[ 0.762117] [drm:intel_dump_pipe_config [i915]] requested mode:
[ 0.762142] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72143 1366 1414 1446 1526 768 771 777 784 0x40 0xa
...
[ 0.762327] [drm:intel_dump_pipe_config [i915]] port clock: 72143, pipe src size: 1024x768, pixel rate 72143
...
[ 0.764666] [drm:drm_atomic_helper_check_plane_state [drm_kms_helper]] Plane must cover entire CRTC
[ 0.764690] [drm:drm_rect_debug_print [drm]] dst: 1024x768+0+0
[ 0.764711] [drm:drm_rect_debug_print [drm]] clip: 1366x768+0+0
[ 0.764713] ------------[ cut here ]------------
[ 0.764714] Could not determine valid watermarks for inherited state
[ 0.764792] WARNING: CPU: 4 PID: 159 at drivers/gpu/drm/i915/intel_display.c:14584 intel_modeset_init+0x3ce/0x19d0 [i915]
...
Cc: FadeMind <fademind@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: FadeMind <fademind@gmail.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Tested-by: Dave Jones <davej@codemonkey.org.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2018-April/163186.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105992
Fixes: a2936e3d9a ("drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426163015.14232-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: FadeMind <fademind@gmail.com>
No functional changes, just a minor knit. Stumbled across the kernel doc for
schedule_timeout() which quotes "In all cases the return value is guaranteed
to be non-negative". Also, the return code of schedule_timeout() already checks
for negative values "return timeout < 0 ? 0 : timeout;" and returns 0
in such cases. Furthermore, the msec_to_jiffies returns an ungined long
value. So, let's do away with the redundant check for an atomic
pipe update.
v2: Commit message changes (Manasi).
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502233300.81220-1-tarun.vyas@intel.com
On intel_dp_compute_config() we were calculating the needed vco
for eDP on gen9 and we stashing it in
intel_atomic_state.cdclk.logical.vco
However few moments later on intel_modeset_checks() we fully
replace entire intel_atomic_state.cdclk.logical with
dev_priv->cdclk.logical fully overwriting the logical desired
vco for eDP on gen9.
So, with wrong VCO value we end up with wrong desired cdclk, but
also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTL to verify if we configured properly the desired
frequency the CD Frequency Select bits [27:26] == 10b can mean
337.5 or 308.57 MHz depending on the VCO. So if we have wrong
VCO value stashed we will believe the frequency selection didn't
stick and start to raise WARNs of cdclk mismatch.
[ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[ 42.897269] cdclk state doesn't match!
[ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915]
[ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
v2: Move the entire eDP's vco logical adjustment to inside
the skl_modeset_calc_cdclk as suggested by Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: bb0f4aab0e ("drm/i915: Track full cdclk state for the logical and actual cdclk frequencies")
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20180502175255.5344-1-rodrigo.vivi@intel.com
As we unpark the engines and are about to begin a new cycle of activity,
mark the current status of the hangceck as idle so that we avoid
carrying over a stale timestamp/action into the next cycle.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502220313.6459-2-chris@chris-wilson.co.uk
If we try to suspend a wedged device following a GPU reset failure, we
will also fail to turn off the rc6 powerwells (on vlv), leading to a
*ERROR*. This is quite expected in this case, so the best we can do is
shake our heads and reduce the *ERROR* to a debug so CI stops
complaining.
Testcase: igt/gem_eio/in-flight-suspend #vlv
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105583
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409094905.4516-1-chris@chris-wilson.co.uk
Move the tracepoint into the common execlists_context_schedule_out() and
call it from preemption completion as well. A small bit of refactoring
code should help with when tracing, or else we end up with requests
mysteriously disappearing and some being emitted to HW multiple times.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502230202.6848-1-chris@chris-wilson.co.uk
We need to move to a more flexible timeline that doesn't assume one
fence context per engine, and so allow for a single timeline to be used
across a combination of engines. This means that preallocating a fence
context per engine is now a hindrance, and so we want to introduce the
singular timeline. From the code perspective, this has the notable
advantage of clearing up a lot of mirky semantics and some clumsy
pointer chasing.
By splitting the timeline up into a single entity rather than an array
of per-engine timelines, we can realise the goal of the previous patch
of tracking the timeline alongside the ring.
v2: Tweak wait_for_idle to stop the compiling thinking that ret may be
uninitialised.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502163839.3248-2-chris@chris-wilson.co.uk
In the future, we want to move a request between engines. To achieve
this, we first realise that we have two timelines in effect here. The
first runs through the GTT is required for ordering vma access, which is
tracked currently by engine. The second is implied by sequential
execution of commands inside the ringbuffer. This timeline is one that
maps to userspace's expectations when submitting requests (i.e. given the
same context, batch A is executed before batch B). As the rings's
timelines map to userspace and the GTT timeline an implementation
detail, move the timeline from the GTT into the ring itself (per-context
in logical-ring-contexts/execlists, or a global per-engine timeline for
the shared ringbuffers in legacy submission.
The two timelines are still assumed to be equivalent at the moment (no
migrating requests between engines yet) and so we can simply move from
one to the other without adding extra ordering.
v2: Reinforce that one isn't allowed to mix the engine execution
timeline with the client timeline from userspace (on the ring).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502163839.3248-1-chris@chris-wilson.co.uk
