This patch adds PCIe node for RK3399 to support
PCIe controller.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the gmac ppower-domain to save power consumption
by letting the driver core handle the power-domain so we can
save power on boards not needing Ethernet.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On some rk3399 boards GPIO0_A0 is hooked up to a 32 kHz clock. This can
be used as the source for various clocks in the system.
Add a pinmux so boards can get this pin properly configured.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With these properties added, sd cards inserted into hikey can work at UHS
mode if they have such capability.
Note, this depends on HiKey UHS-SD support patch [1] to work properly.
If you didn't add this patch, but added sd-uhs- properties into dwmmc_1,
then sd cards cannot work. As of this post, patch [1] has been integrated
into maintainer's next branch [2].
[1]: [V4] mmc: dw_mmc-k3: UHS-SD card for Hisilicon Hikey,
https://patchwork.kernel.org/patch/9262515/
[2]: https://git.linaro.org/people/ulf.hansson/mmc.git next
commit a8a5b2909cfc ("mmc: dw_mmc: k3: UHS-SD card for Hisilicon Hikey")
cc: Ulf Hansson <ulf.hansson@linaro.org>
cc: Jaehoon Chung <jh80.chung@samsung.com>
cc: Jinguojun <kid.jin@hisilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add the NVMEM device node in the DTSI.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
[khilman: dropped driver cleanup hunk]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the secure monitor node in the Amlogic Meson GXBB DTSI file to
enable it.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Enable the Infrared Remote Controller on boards which have an Infrared
receiver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This adds the Infrared Remote Controller node so boards with an IR
remote can simply enable it.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the AO clock controller node for the AmLogic GXBB SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The UniPhier reset controller driver has been merged. Enable it.
Also, replace the fixed-rate clocks with the dedicated clock
drivers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
To support display in Debian on HiKey, cma heap is used to allocate
graphic buffers. The default size of CMA is 16 MB which is not enough.
Increase the default CMA size to 128 MB.
cc: Fathi Boudra <fathi.boudra@linaro.org>
cc: John Stultz <john.stultz@linaro.org>
cc: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
All UniPhier device trees have the common prefix "uniphier-", so
"ph1-" is just making names longer. Recent documents and other
projects are not using PH1- prefixes any more.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add a default stdout-path to chosen node for ls2080a/ls1043a boards to
allow booting kernels without specifying console info in bootargs.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-add missing serial aliases to ls1043a-rdb
-update ls1043a-qds boards serial aliases to use the standard duarts
instead of low power uarts
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The APQ8016-sbc provides a HDMI output. The APQ8016 display block only
provides a MIPI DSI output. So, the board has a ADV7533 DSI to HDMI
encoder chip that sits between the DSI PHY output and the HDMI
connector.
Add the ADV7533 DT node under its I2C control bus, and tie the DSI
output port to the ADV7533's input port.
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The MSM8916 SoC contains a MDP5 based display block, and one DSI output.
Add the top level MDSS DT node, and the MDP5, DSI and DSI PHY children
sub-blocks. Establish the link between MDP5's INTF1 output port and DSI's
input port.
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Per testing, this can reduce the memory latency and d8 gets
better scores.
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Due to incorrect description in the TRM, the WDTs base address
should be fixed and swap them like this:
WDT0 - 0xff848000
WDT1 - 0xff840000
And, it is right that only WDT0 can generate global software reset.
We will update the TRM to fix it.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit adds the necessary Device Tree description for the PIC
interrupt controller and the PMU available in the Marvell Armada 7K and
Armada 8K SoCs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch adds support to external sd card.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to SPI on HS expansion connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to SPI on LS expansion connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to i2c bus on High speed connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to LS_I2C1 on LS expansion connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to LS-I2C0 on LS expansion connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to 4 pin UART0 on LS expansion connector.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds apq8096 db820c basic support with serial port.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds sas and relevant nodes for Hip06 D03 board.
Cc: Xiang Chen <chenxiang66@hisilicon.com>
Cc: John Garry <john.garry@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
There are four ports(2 GE, 2 XGE) in D03 board, append
relevant nodes for them.
Cc: Kejian Yan <yankejian@huawei.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The dsaf interrupt of hns connects to mbigen, but the mbigen(version 1)
isn't upsteamed. Currently, hip05_hns.dtsi uses mbigen_dsa and it will
never be built, so kill it for now, will add them back and merge them into
hip05.dtsi once mbigen-v1 is accepted.
Cc: Kejian Yan <yankejian@huawei.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch reserves some memory in the DTS and sets up a
pstore device tree node to enable pstore support on HiKey.
Cc: Kees Cook <keescook@chromium.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add support to hikey dts for the syscon-reboot-mode driver.
After trying an approach using a sram driver and node, a number
of issues cropped up which would make it so we would be
duplicating a lot of extra syscon infrastructure in order to
support mfds on sram. After talking with Bjorn, using the
syscon driver for this seems like an better choice.
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable support for higher baud rates (up to 3Mbps) in UART1 - required
for bluetooth transfers.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable the XUSB controller on Tegra210 Smaug. The Smaug has a USB Type-C
connector with one of the USB2.0 lanes and one of the USB3.0 lanes
populated.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 Smaug includes the Realtek RT5677 audio codec, Nuvoton
NAU8825 headset codec and the Maxim MAX98357a audio amplifier. Add
the nodes for these devices for the Tegra210 Smaug.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
[treding@nvidia.com: use interrupts property consistently]
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 Smaug uses I2C6 for interfacing to various audio chips.
I2C6 shares pads with the DPAUX interface and to allow I2C6 to request
the pads owned by DPAUX, the DPAUX device needs to be enabled. Enable
DPAUX for Tegra210 Smaug.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the ACONNECT, ADMA and AGIC nodes for Tegra210 Smaug which
are used for audio use-cases.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add node for SOR power-domain for Tegra210 and populate the SOR
power-domain phandle for DPAUX, DSI, MIPI-CAL and SOR and nodes that are
dependent on this power-domain.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the ADMA node for Tegra210. The ADMA is used by the Audio
Processing Engine (APE) on Tegra210 for moving data between the APE
and system memory.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the Audio GIC (AGIC) node for Tegra210. This interrupt
controller is used by the Audio Processing Engine to route interrupts
to the main CPU interrupt controller. The AGIC is based on the ARM
GIC400 and so uses the clock name "clk" as specified by the GIC binding
document for GIC400 devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Drop the clock and reset names for the Tegra210 XUSB powergates because
these are not currently used and not required by the Tegra PMC binding
documentation.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch adds saradc needed information on rk3399 SoCs.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When a device uses the GIC as its interrupt controller and generates
SPIs, only the values 1 (edge rising) and 4 (level high) are legal.
Anything else is just plain wrong (can't be programmed into the HW),
and leads to aborted driver probes (USB doesn't work with 4.8-rc1
on a Dragonboard 410C).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The TCSR memory segment includes various functionality, among other
things the halt-registers for the Hexagon.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
On msm8916 SCM acts as a controller for the MSS_RESET found in the GCC,
update the DT node so that we can address this.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The modem boot authenticator needs space to play in, this is supposed to
be relocatable and as such could later be replaced with a dynamically
allocated chunk of memory. But let's give it a reserve for now, as we
know that works.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the smsm and smp2p nodes for the hexagon and wcnss
cores.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
SARADC controller needs to be reset before programming it, otherwise
it will not function properly.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add an HDMI connector node and enable the devices that are part of the
HDMI display path: cec, dpi0, hdmi_phy, and hdmi0.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch adds the device nodes for the HDMI encoder, HDMI PHY,
and HDMI CEC modules.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Cawa Cheng <cawa.cheng@mediatek.com>
Signed-off-by: Jie Qiu <jie.qiu@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Corrected the watchdog timer interrupt number.
Origin value was for CSUPMU watchdog.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ZynqMP is not using global interrupt-parent setting that's why
it has to be listed in every node separately. PMU node missed it and
this patch is adding it.
Reported-by: John Linn <John.Linn@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Use 64bit size cell format instead of 32bit for memory
description. Change 64bit sizes also for all others IPs.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The GIC ranges in the zynqmp device tree are only 4kb aligned. Since
commit 12e14066f we automatically deal with aliases GIC regions though,
so we can map them transparently into guests even on 64kb page size
systems.
This patch makes use of that features and sets GICC and GICV to 64kb
aligned and sized regions.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Minor overlapping changes for both merge conflicts.
Resolution work done by Stephen Rothwell was used
as a reference.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add vcc5v0_host regulator for usb2-phy and enable host-port support.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add usb2-phy nodes and specify phys phandle for ehci.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The compatible value need only include an entry for the specific HW
generation, plus the oldest HW version that introduced changes it is
backwards-compatible with; intermediate versions aren't necessary. Since
Tegra124 GPIO is backwards-compatible with Tegra30 GPIO, there's no need
to include the Tegra124 value in the Tegra210 DTS. This makes the kernel
DT better match the copy of the DT files included in U-Boot.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch fixes the backward compatibility when used with older kernel.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added rxlos GPIO mapping by adding rxlos-gpios property.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A couple of bug fixes have come in for v4.8 so far. Since the first few were
originally meant to go into -rc1 (but didn't get sent in time for travel
reasons), the branch is unfortunately based on top of a commit in the
middle of the merge window rather than -rc1.
Content-wise we have
- A fix for the last remaining broken build in kernelci,
getting mach-shmobile to build again with SMP disabled
- A fix for a realview regression that broke real hardware but
not the qemu model that everyone uses in practice (needed
for v4.7 as well)
- A merge conflict fix for Tegra that also broke v4.7
- Two Kconfig fixes for arm64 build regressions
- A couple of arm32 build warning fixes (all harmless)
- Fixing the RTC on Exynos7 Espresso (which apparently
never worked right)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=n3Zs
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of bug fixes have come in for v4.8 so far. Since the first
few were originally meant to go into -rc1 (but didn't get sent in time
for travel reasons), the branch is unfortunately based on top of a
commit in the middle of the merge window rather than -rc1.
Content-wise we have:
- a fix for the last remaining broken build in kernelci, getting
mach-shmobile to build again with SMP disabled
- a fix for a realview regression that broke real hardware but not
the qemu model that everyone uses in practice (needed for v4.7 as
well)
- a merge conflict fix for Tegra that also broke v4.7
- two Kconfig fixes for arm64 build regressions
- a couple of arm32 build warning fixes (all harmless)
- fix the RTC on Exynos7 Espresso (which apparently never worked
right)"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
Merge tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux into randconfig-4.8
arm64: Kconfig: select HISILICON_IRQ_MBIGEN only if PCI is selected
arm64: Kconfig: select ALPINE_MSI only if PCI is selected
ARM: dts: realview: Fix PBX-A9 cache description
ARM: tegra: fix erroneous address in dts
ARM: dts: add syscon compatible string for AP syscon
ARM: dts: add syscon compatible string for CP syscon
ARM: oxnas: select reset controller framework
ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M
ARM: don't include removed directories
Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME"
ARM: shmobile: don't call platform_can_secondary_boot on UP
MAINTAINER: alpine: add a mailing list
ARM: do away with final ARCH_REQUIRE_GPIOLIB
arm64: dts: Fix RTC by providing rtc_src clock
Add syscon-reboot-mode driver DT node for rk3368 platform
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Caesar Wang <caesar.upstream@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Replace hex flags with human-readable symbols from arm-gic.h header
which makes it easier to recognize what is configured.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
By default the SATA IP on the qoriq SoCs does not generating
coherent/snoopable transactions. This patch enable it in the
sata axicc register.
In addition, the dma-coherent property must be set on the
SATA controller nodes.
Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit adds a Device Tree description for the Marvell Armada 8040
Development Board. It features a quad-core Cortex A72 Armada 8040 SoC,
with a large number of peripherals: dual Gigabit, dual 10 GBit, 6 PCIe
interfaces, 6 SATA ports, 4 USB 3.0 ports, and more.
Only a subset of the functionalities are supported so far, and
additional features will be progressively enabled in the future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The Armada 8K platforms (8020 and 8040) have two CP110 HW blocks: one
master, one slave. So far, only the master CP110 was described. This
commit adds the Device Tree description for the slave CP110, and hooks
it up in the DT description of the Armada 8020 and Armada 8040 SoCs.
The slave CP110 description is somewhat similar to the master CP110
description except for a number of things like register offsets,
interrupt numbers, references to clocks, etc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
commit 1ade61c141 ("arm64: dts: rockchip: remove broken-cd
from emmc and sdio") was intended to remove the abuse of
broken-cd property from mmc. But somehow it forgot to remove
this property from sdio0 node. Let's remove it now.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds basic support for the Tronsmart orion r86 set-top-box.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In order to meet low power requirements, a power management unit (PMU) is
designed for controlling power resources in RK3399. The RK3399 PMU is
dedicated for managing the power of the whole chip.
1. add pd node for RK3399 Soc
2. create power domain tree
3. add qos node for domain
From the DT/binds and driver can get more detail information:
The driver:
drivers/soc/rockchip/pm_domains.c
The document:
Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
Note:
As the TRM lists many voltage domains and power domains, then this patch
adds some domains for driver. Due to some domains
(e.g. emmc, usb, core)...We can't turned off it on
bootup, or says some device driver can't handle the power domain enough.
Maybe We will add more other domains in the future or later.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add RTC source clock as Exynos7 needs source (32.768KHz) clock
for RTC block. Without this currently S3C RTC driver probe is broken
on this SoC.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we merge
through arm-soc for historical reasons, is also sizable this time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=O8+y
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we
merge through arm-soc for historical reasons, is also sizable this
time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
ARM: ux500: consolidate base platform files
ARM: ux500: move soc_id driver to drivers/soc
ARM: ux500: call ux500_setup_id later
ARM: ux500: consolidate soc_device code in id.c
ARM: ux500: remove cpu_is_u* helpers
ARM: ux500: use CLK_OF_DECLARE()
ARM: ux500: move l2x0 init to .init_irq
mfd: db8500 stop passing around platform data
ASoC: ab8500-codec: remove platform data based probe
ARM: ux500: move ab8500_regulator_plat_data into driver
ARM: ux500: remove unused regulator data
soc: raspberrypi-power: add CONFIG_OF dependency
firmware: scpi: add CONFIG_OF dependency
video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
serial: clps711x: Changing the compatibility string to match with the smallest supported chip
irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
clk: clps711x: Changing the compatibility string to match with the smallest supported chip
...
Pull networking updates from David Miller:
1) Unified UDP encapsulation offload methods for drivers, from
Alexander Duyck.
2) Make DSA binding more sane, from Andrew Lunn.
3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.
4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.
5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
packets as soon as the device sees them, with the option to mirror
the packet on TX via the same interface. From Brenden Blanco and
others.
6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.
7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.
8) Simplify netlink conntrack entry layout, from Florian Westphal.
9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
Schimmel, Yotam Gigi, and Jiri Pirko.
10) Add SKB array infrastructure and convert tun and macvtap over to it.
From Michael S Tsirkin and Jason Wang.
11) Support qdisc packet injection in pktgen, from John Fastabend.
12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.
13) Add NV congestion control support to TCP, from Lawrence Brakmo.
14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.
15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.
16) Support MPLS over IPV4, from Simon Horman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
xgene: Fix build warning with ACPI disabled.
be2net: perform temperature query in adapter regardless of its interface state
l2tp: Correctly return -EBADF from pppol2tp_getname.
net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
net: ipmr/ip6mr: update lastuse on entry change
macsec: ensure rx_sa is set when validation is disabled
tipc: dump monitor attributes
tipc: add a function to get the bearer name
tipc: get monitor threshold for the cluster
tipc: make cluster size threshold for monitoring configurable
tipc: introduce constants for tipc address validation
net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
MAINTAINERS: xgene: Add driver and documentation path
Documentation: dtb: xgene: Add MDIO node
dtb: xgene: Add MDIO node
drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
drivers: net: xgene: Use exported functions
drivers: net: xgene: Enable MDIO driver
drivers: net: xgene: Add backward compatibility
drivers: net: phy: xgene: Add MDIO driver
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mrOW
-----END PGP SIGNATURE-----
Merge tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new framework support for HDMI CEC and remote control support
- new encoding codec driver for Mediatek SoC
- new frontend driver: helene tuner
- added support for NetUp almost universal devices, with supports
DVB-C/S/S2/T/T2 and ISDB-T
- the mn88472 frontend driver got promoted from staging
- a new driver for RCar video input
- some soc_camera legacy drivers got removed: timb, omap1, mx2, mx3
- lots of driver cleanups, improvements and fixups
* tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
[media] cec: always check all_device_types and features
[media] cec: poll should check if there is room in the tx queue
[media] vivid: support monitor all mode
[media] cec: fix test for unconfigured adapter in main message loop
[media] cec: limit the size of the transmit queue
[media] cec: zero unused msg part after msg->len
[media] cec: don't set fh to NULL in CEC_TRANSMIT
[media] cec: clear all status fields before transmit and always fill in sequence
[media] cec: CEC_RECEIVE overwrote the timeout field
[media] cxd2841er: Reading SNR for DVB-C added
[media] cxd2841er: Reading BER and UCB for DVB-C added
[media] cxd2841er: fix switch-case for DVB-C
[media] cxd2841er: fix signal strength scale for ISDB-T
[media] cxd2841er: adjust the dB scale for DVB-C
[media] cxd2841er: provide signal strength for DVB-C
[media] cxd2841er: fix BER report via DVBv5 stats API
[media] mb86a20s: apply mask to val after checking for read failure
[media] airspy: fix error logic during device register
[media] s5p-cec/TODO: add TODO item
[media] cec/TODO: drop comment about sphinx documentation
...
Add the SoC-level description of the PCIe controller found on the Marvell
Armada 3700 and enable this PCIe controller on the development board for
this SoC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.8:
API:
- first part of skcipher low-level conversions
- add KPP (Key-agreement Protocol Primitives) interface.
Algorithms:
- fix IPsec/cryptd reordering issues that affects aesni
- RSA no longer does explicit leading zero removal
- add SHA3
- add DH
- add ECDH
- improve DRBG performance by not doing CTR by hand
Drivers:
- add x86 AVX2 multibuffer SHA256/512
- add POWER8 optimised crc32c
- add xts support to vmx
- add DH support to qat
- add RSA support to caam
- add Layerscape support to caam
- add SEC1 AEAD support to talitos
- improve performance by chaining requests in marvell/cesa
- add support for Araneus Alea I USB RNG
- add support for Broadcom BCM5301 RNG
- add support for Amlogic Meson RNG
- add support Broadcom NSP SoC RNG"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (180 commits)
crypto: vmx - Fix aes_p8_xts_decrypt build failure
crypto: vmx - Ignore generated files
crypto: vmx - Adding support for XTS
crypto: vmx - Adding asm subroutines for XTS
crypto: skcipher - add comment for skcipher_alg->base
crypto: testmgr - Print akcipher algorithm name
crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_op
crypto: nx - off by one bug in nx_of_update_msc()
crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct
crypto: scatterwalk - Inline start/map/done
crypto: scatterwalk - Remove unnecessary BUG in scatterwalk_start
crypto: scatterwalk - Remove unnecessary advance in scatterwalk_pagedone
crypto: scatterwalk - Fix test in scatterwalk_done
crypto: api - Optimise away crypto_yield when hard preemption is on
crypto: scatterwalk - add no-copy support to copychunks
crypto: scatterwalk - Remove scatterwalk_bytes_sglen
crypto: omap - Stop using crypto scatterwalk_bytes_sglen
crypto: skcipher - Remove top-level givcipher interface
crypto: user - Remove crypto_lookup_skcipher call
crypto: cts - Convert to skcipher
...
Added mdio node for mdio driver. Also added phy-handle
reference to the ethernet nodes.
Removed unused clock node from storm sgenet1.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Tested-by: Toan Le <toanle@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A slew of updates for Tegra210 support: PMIC and regulator additions,
which in turn allow a bunch of features to be enabled. Some assemblies
of the Jetson TX1 come with a DSI panel that is now supported. For all
other assemblies, this set of changes enables the HDMI output. Jetson
TX1 can now also make use of the XUSB controller.
PMIC and regulator support is also added for Smaug, which will allow a
number of interesting feature additions in future releases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3zUA
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/late
Merge "arm64: tegra: Device tree changes for v4.8-rc1" from Thierry Reding:
A slew of updates for Tegra210 support: PMIC and regulator additions,
which in turn allow a bunch of features to be enabled. Some assemblies
of the Jetson TX1 come with a DSI panel that is now supported. For all
other assemblies, this set of changes enables the HDMI output. Jetson
TX1 can now also make use of the XUSB controller.
PMIC and regulator support is also added for Smaug, which will allow a
number of interesting feature additions in future releases.
* tag 'tegra-for-4.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable HDMI on Jetson TX1
arm64: tegra: Add sor1_src clock
arm64: tegra: Add XUSB powergates on Tegra210
arm64: tegra: Add DPAUX pinctrl bindings
arm64: tegra: Add ACONNECT bus node for Tegra210
arm64: tegra: Add audio powergate node for Tegra210
arm64: tegra: Add regulators for Tegra210 Smaug
arm64: tegra: Correct Tegra210 XUSB mailbox interrupt
arm64: tegra: Enable XUSB controller on Jetson TX1
arm64: tegra: Enable debug serial on Jetson TX1
arm64: tegra: Add Tegra210 XUSB controller
arm64: tegra: Add Tegra210 XUSB pad controller
arm64: tegra: Add DSI panel on Jetson TX1
arm64: tegra: p2597: Add SDMMC power supplies
arm64: tegra: Add PMIC support on Jetson TX1
Merge "ARM64: DT: Hisilicon Hi6220 updates for 4.8" from Wei Xu:
- Add pl031 rtc0 and rtc1 support for hi6220 SoC
* tag 'hi6220-dt-for-4.8-2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi6220: Add pl031 RTC support
clk: hi6220: Add RTC clock for pl031
The sor1 IP block needs the sor1_src clock to configure the clock tree
depending on whether it's running in HDMI or DP mode.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 XUSB subsystem has 3 power partitions which are XUSBA
(super-speed logic), XUSBB (USB device logic) and XUSBC (USB host
logic). Populate the device-tree nodes for these XUSB partitions.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the DPAUX pinctrl states for the DPAUX nodes defining all three
possible states of "aux", "i2c" and "off". Also add the 'i2c-bus'
node for the DPAUX nodes so that the I2C driver core does not attempt
to parse the pinctrl state nodes.
Populate the nodes for the pinctrl clients of the DPAUX pin controller.
There are two clients for each DPAUX instance, namely the SOR and one of
the I2C adapters. The SOR clients may used the DPAUX pins in either AUX
or I2C modes and so for these devices we don't define any of the generic
pinctrl states (default, idle, etc) because the SOR driver will directly
set the state needed. For I2C clients only the I2C mode is used and so
we can simplify matters by using the generic pinctrl states for default
and idle.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the ACONNECT bus node for Tegra210 which is used to interface to
the various devices in the Audio Processing Engine (APE).
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add regulators to the Tegra210 Smaug DTS file including support for the
MAX77620 PMIC.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The XUSB mailbox interrupt for Tegra210 is 40 and not 49 which is for
the XUSB pad controller. For some Tegra210 boards, this is causing USB
connect and disconnect events to go undetected. Fix this by changing the
interrupt number for the XUSB mailbox to 40.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the XUSB controller on Jetson TX1. One of the USB 3.0 lanes goes
to an internal ethernet interface, while a second USB 3.0 lane supports
the USB-A receptacle on the I/O board.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a chosen node to the device tree that contains a stdout-path
property which defines the debug serial port.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a device tree node for the Tegra XUSB controller. It contains a
phandle to the XUSB pad controller for control of the PHYs assigned
to the USB ports.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add power supplies for the SD/MMC card slot. Note that vmmc-supply is
currently restricted to 3.3 V because we don't support switching the
mode yet.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a device tree node for the MAX77620 PMIC found on the p2180
processor module (Jetson TX1). Also add supporting power supplies,
such as the main 5 V system supply.
Signed-off-by: Thierry Reding <treding@nvidia.com>
1. Adjust the voltage of CPU buck regulator so scaling could work.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ku6i
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Merge "Samsung DeviceTree changes for ARM64 for v4.8" from Krzysztof Kozlowski:
1. Adjust the voltage of CPU buck regulator so scaling could work.
* tag 'samsung-dt64-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Modify the voltage range for BUCK2 for exynos7
1. Adds various CoreSight debug components on Juno boards
2. Adds SCPI device power domains and use them for coresight components
3. Adds thermal zones for SCPI sensors on Juno
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bxrw
-----END PGP SIGNATURE-----
Merge tag 'juno-dt-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Merge "Juno platform DT updates for v4.8" from Sudeep Holla:
1. Adds various CoreSight debug components on Juno boards
2. Adds SCPI device power domains and use them for coresight components
3. Adds thermal zones for SCPI sensors on Juno
* tag 'juno-dt-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: add thermal zones for scpi sensors
arm64: dts: juno: add SCPI power domains for device power management
arm64: dts: juno: add coresight support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXefulAAoJEHm+PkMAQRiG6nMH/2O1vcZeOtqmx2yCMUeXyKAT
wG88XflXzf3rM7C7TiObEYVf/bbLleJ7saDLEeic7ButD5gyYacIuzylVnrcqfBc
vinz4cOw5kvu9DrRkCKdOfiTAgwYtqQW+syJ8ZK4lPQuSxnPAs+F/FKSOpyUF5FN
Dngr520KjYKBEtn27W9UDPChFRwQoWAlaOC534eusaArCJtHGHHiuq5TEDn2EIo8
pUw2vwx5JiquSHOY34WLU7r+QoilovCQlUSsBQdLlPjfMB1QFtclPYa+5yEMjkT4
wusOUOfS/zK0rV6KnEdc/SkpiVX5C9WpFiWUOdEeJ5mZ+KijVkaOa9K1EDx8jSM=
=7Hwh
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rc6' into patchwork
Linux 4.7-rc6
* tag 'v4.7-rc6': (1245 commits)
Linux 4.7-rc6
ovl: warn instead of error if d_type is not supported
MIPS: Fix possible corruption of cache mode by mprotect.
locks: use file_inode()
usb: dwc3: st: Use explicit reset_control_get_exclusive() API
phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API
phy: miphy28lp: Inform the reset framework that our reset line may be shared
namespace: update event counter when umounting a deleted dentry
9p: use file_dentry()
lockd: unregister notifier blocks if the service fails to come up completely
ACPI,PCI,IRQ: correct operator precedence
fuse: serialize dirops by default
drm/i915: Fix missing unlock on error in i915_ppgtt_info()
powerpc: Initialise pci_io_base as early as possible
mfd: da9053: Fix compiler warning message for uninitialised variable
mfd: max77620: Fix FPS switch statements
phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared
usb: dwc3: st: Inform the reset framework that our reset line may be shared
usb: host: ehci-st: Inform the reset framework that our reset line may be shared
usb: host: ohci-st: Inform the reset framework that our reset line may be shared
...
Add video encoder node for MT8173
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This reverts commit f3abd62961, which caused a build regression:
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi:48:41: fatal error: dt-bindings/clock/gxbb-clkc.h: No such file or directory
We should apply this patch one merge window later, once the clk branch
is merged as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
changes for 4.8. Please note that this pull request contains changes from the
ARM 32-bits port and ARM 64-bits port as well:
- Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with
their proper information about the on-board USB Ethernet adapter so there is
appropriate binding between this USB device and a device_node (useful for MAC
address fetching and stuff), this commit is also present for the ARM DT pull
request
- Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding
information and the basic SoC DT include file required to boot to a prompt
- Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the
earlier change from Lubomir
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KQmU
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/devicetree-arm64-part2' of http://github.com/Broadcom/stblinux into next/dt64
Merge "Broadcom ARM64 Device Tree changes for 4.8 (part 2)" from Florian Fainelli:
This pull request contains the second part of the Broadcom ARM64-based SoCs
changes for 4.8. Please note that this pull request contains changes from the
ARM 32-bits port and ARM 64-bits port as well:
- Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with
their proper information about the on-board USB Ethernet adapter so there is
appropriate binding between this USB device and a device_node (useful for MAC
address fetching and stuff), this commit is also present for the ARM DT pull
request
- Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding
information and the basic SoC DT include file required to boot to a prompt
- Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the
earlier change from Lubomir
* tag 'arm-soc/for-4.8/devicetree-arm64-part2' of http://github.com/Broadcom/stblinux:
ARM: bcm2837: dt: Add the ethernet to the device trees
ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
dt-bindings: Add root properties for Raspberry Pi 3
ARM: bcm2835: dt: Add the ethernet to the device trees
Pull the clockevents/clocksource tree from Daniel Lezcano:
- Convert the clocksource-probe init functions to return a value in order to
prepare the consolidation of the drivers using the DT. It is a big patchset
but went through 01.org (kbuild bot), linux next and kernel-ci (continuous
integration) (Daniel Lezcano)
- Fix a bad error handling by returning the right value for cadence_ttc
(Christophe Jaillet)
- Fix typo in the Kconfig for the Samsung pwm (Alexandre Belloni)
- Change functions to static for armada-370-xp and digicolor (Ben Dooks)
- Add support for the rk3399 SoC timer by adding bindings and a slight
change in the base address. Take the opportunity to add the DYNIRQ flag
(Huang Tao)
- Fix endian accessors for the Samsung pwm timer (Matthew Leach)
- Add Oxford Semiconductor RPS Dual Timer driver (Neil Armstrong)
- Add a kernel parameter to swich on/off the event stream feature of the arch
arm timer (Will Deacon)
- update dt with mv-xor-v2 found in the Armada 7K/8K SoCs
- update dt with the clocks found in the Armada 3700 SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAld6y2sACgkQCwYYjhRyO9UU9wCgpZ7Nd5KeqQMuwOPL/RNjIg6F
oHsAoKcUVoQteML8NkpMeyr9Lk+dtb0A
=OElN
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.8-1' of git://git.infradead.org/linux-mvebu into next/dt64
Merge "mvebu dt64 for 4.8 (part 1)" from Gregory CLEMENT:
- update dt with mv-xor-v2 found in the Armada 7K/8K SoCs
- update dt with the clocks found in the Armada 3700 SoCs
* tag 'mvebu-dt64-4.8-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add peripherals clocks for Armada 37xx
arm64: dts: marvell: add tbg clocks for Armada 37xx
arm64: dts: marvell: Add xtal clock support for Armada 3700
arm64: dts: marvell: add XOR engine description for Armada 7K/8K CP
arm64: dts: marvell: adjust to the latest mv-xor-v2 DT binding
Enable the Watchdog Timer (WDT) controller on the Renesas Salvator-X
board equipped with an R-Car M3-W (r8a7796) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Watchdog Timer (WDT) controller on the Renesas
R-Car M3-W (r8a7796) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Hook up all devices that are part of the CPG/MSSR Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the System Controller.
Hook up the Cortex-A57 CPU core and L2 cache/SCU to their respective PM
Domains.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Basic support for the Gen 3 R-Car M3-W SoC.
Based on work for the r8a7795 and r8a7796 SoCs by
Takeshi Kihara, Dirk Behme and Geert Uytterhoeven.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Adds CAN FD controller node for r8a7795.
Note: CAN FD controller register base address specified in R-Car Gen3
Hardware User Manual v0.5E is incorrect. The correct address is:
CAN FD - 0xe66c0000
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
For consistency with a57_0/a57_1 cpu nodes, and all other nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
i2c and core io-domain nodes and some reasonable default rates
for core clocks. The rk3368 also gets io-domains for its r88 board
as well as a small fix for the gic's memory regions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXdbPUAAoJEPOmecmc0R2BiAUH/2UBBQ1f5A9W5bCtxe+kirFa
R+4tDNske10/h3ey+igciC+6SG4RavHyQn/MoQvu2rzeZvAoPRYi2IVR3/RERf86
uuDNMqI9C0zQNujuiN/1eVMLAhAUoDZ9+uC1uEJ6ilzKwcsk6Sb+8Fo/zQnR8evd
Z4GK+YnJtLvxQ3joEh5AcRbd+CaURjAXeJt1HGlDcLCG8HHKNNDpzaFPV2uaoVXp
1hwx7X8tY5u13K0W7yAzaAq5C4poKa+OpdxlE5g+ryOFWqnqco4l/BBaWg+XK0z5
XvPjtDE5Di8Wpgjeik/4KLwG/maD9ogdPAZGmg+U2SkGlwVdcOSZmSOE2mFHf3c=
=W2eY
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
The rk3399 gets support for its emmc controller as well as thermal,
i2c and core io-domain nodes and some reasonable default rates
for core clocks. The rk3368 also gets io-domains for its r88 board
as well as a small fix for the gic's memory regions.
* tag 'v4.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add ap_pwroff and ddrio_pwroff pins for rk3399
arm64: dts: rockchip: Provide emmcclk to PHY for rk3399
arm64: dts: rockchip: Add soc-ctl-syscon to sdhci for rk3399
arm64: dts: rockchip: fixes the gic400 2nd region size for rk3368
arm64: dts: rockchip: add i2c nodes for rk3399
arm64: dts: rockchip: add thermal nodes for rk3399 SoCs
arm64: dts: rockchip: add rk3399 io-domain core nodes
arm64: dts: rockchip: add rk3368-r88 iodomains
arm64: dts: rockchip: add rk3368 io-domain core nodes
arm64: dts: rockchip: make rk3368 grf syscons simple-mfds
arm64: dts: rockchip: enable eMMC for rk3399 EVB
arm64: dts: rockchip: add sdhci/emmc for rk3399
arm64: dts: rockchip: make rk3399's grf a "simple-mfd"
arm64: dts: rockchip: assign default rates for core rk3399 clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
Change the BUCK2 (vdd_atlas) voltage range to '500 - 1200mv' since
CPU DVFS requires it.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
- name the GPIO lines
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bqGx
-----END PGP SIGNATURE-----
Merge tag 'hi6220-dt-for-4.8' of git://github.com/hisilicon/linux-hisi into next/dt64
ARM64: DT: Hisilicon Hi6220 hikey board updates for 4.8
- name the GPIO lines
* tag 'hi6220-dt-for-4.8' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hikey: name the GPIO lines
Signed-off-by: Olof Johansson <olof@lixom.net>
- Update address-cells and reg properties of cpu nodes, considering
MPIDR_EL1[63:32] bits are not used for CPUs identification on ls1043a
and ls2080a
- Adds the cache nodes and next-level-cache property for ls1043a and
ls2080a to get cacheinfo work on these platforms
- Add dma-coherent for ls1043a PCI nodes to utilize the hardware
capability on data coherency
- Add dis_rxdet_inp3_quirk property for USB3 device to disable rx
detection in P3 PHY mode
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXcm2nAAoJEFBXWFqHsHzO6DAH/05cUGH7SLcJMBV0AVSEfCVK
eQTsriBUNNXcUwt70AUBAymfUkHPNysdN4P+KfReOc0j4FMQKqUB9UttUFItmxd2
plfhkd1wjusV5DqyqQI2Yzp7dsipgJdOoOUc206LISpJ2eaPZrOH0sOXUfZgcZ7h
F4vz5shTGk+zrvBbOd8VmTRizxr7Q1oUYAwOvAHH0DvFUFMfs3+nK8jN7qynBhnB
bdRbNxpNz2kkxrad3mIrKGLjPTBfNyhqTB6jwttwptzqOVxVhK59Kopox5dh2Mha
PvhLes1KYxdpw6CcyyJov7hvleRjKKK8kq08krEBldWeXPHB/GDREuMNg7EcNGU=
=m0V3
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
The Freescale arm64 device tree updates for 4.8:
- Update address-cells and reg properties of cpu nodes, considering
MPIDR_EL1[63:32] bits are not used for CPUs identification on ls1043a
and ls2080a
- Adds the cache nodes and next-level-cache property for ls1043a and
ls2080a to get cacheinfo work on these platforms
- Add dma-coherent for ls1043a PCI nodes to utilize the hardware
capability on data coherency
- Add dis_rxdet_inp3_quirk property for USB3 device to disable rx
detection in P3 PHY mode
* tag 'imx-dt64-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls2080a: Add cache nodes for cacheinfo support
arm64: dts: ls1043a: Add cache nodes for cacheinfo support
arm64: dts: ls1043a: Add 'dma-coherent' for ls1043a PCI nodes
bindings: PCI: layerscape: Add 'dma-coherent' property
arm64: dts: ls1043a: Add dis_rxdet_inp3_quirk property to USB3 node
arm64: dts: ls2080a: Add dis_rxdet_inp3_quirk property to USB3 node
arm64: dts: fsl: Update address-cells and reg properties of cpu nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
support. Note that it also merges in the ethernet DT changes so that
the Pi3's ethernet can also get the MAC address.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tOiy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4CCL
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-dt-64-next-2016-07-03' into devicetree-arm64/next
This pull request brings in the Raspberry Pi 3 DT for its arm64
support. Note that it also merges in the ethernet DT changes so that
the Pi3's ethernet can also get the MAC address.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add two new blocks of clocks. The peripheral clocks are the source clocks
of the peripheral of the Armada 3700 SoC.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add a new block of clocks. The Time Base Generators clocks can be the
parent of the peripheral clocks.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The configuration of the clock depend of the gpio latch. This information
is stored in the gpio block registers. That's why the block is shared
using a syscon node.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This adds basic chip support for MT6755 SoC.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This commit adds the Device Tree description for the two XOR engines
found in the CP part of the Armada 7K/8K SoC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
As suggested by Rob Herring, we should:
1/ Use a SoC-specific compatible string in addition to the more generic
one.
2/ The generic compatible string has been changed from
"marvell,mv-xor-v2" to "marvell,xor-v2".
We simply reflect the changes made to the Device Tree bindings to the
relevant Marvell 7K/8K Device Tree files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Several cases of overlapping changes, except the packet scheduler
conflicts which deal with the addition of the free list parameter
to qdisc_enqueue().
Signed-off-by: David S. Miller <davem@davemloft.net>
This names the GPIO lines on the HiKey board in accordance with
the 96Board Specification for especially the Low Speed External
Connector: "GPIO-A" thru "GPIO-L".
This will make these line names reflect through to userspace
so that they can easily be identified and used with the new
character device ABI.
Some care has been taken to name all lines, not just those used
by the external connectors, also lines that are muxed into some
other function than GPIO: these are named "[FOO]" so that users
can see with lsgpio what all lines are used for.
Cc: devicetree@vger.kernel.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: David Mandala <david.mandala@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add a 'rktimer' node in the device treee for the ARM64 rk3399 SoC.
Signed-off-by: Huang Tao <huangtao@rock-chips.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Tested-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
There are two sleep related pins on rk3399: ap_pwroff and ddrio_pwroff.
Let's add the definition of these two pins to rk3399's main dtsi file so
that boards can use them.
These two pins are similar to the global_pwroff and ddrio_pwroff pins in
rk3288 and are expected to be used in the same way: boards will likely
want to configure these pinctrl settings in their global pinctrl hog
list.
Note that on rk3288 there were two additional pins in the "sleep"
section: "ddr0_retention" and "ddr1_retention". On rk3288 designs these
pins appeared to actually route from rk3288 back to rk3288. Presumably
on rk3399 this is simply not needed since the pins don't appear to exist
there.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
