The RPC_TASK_RUNNING flag will always have been set in rpc_make_runnable()
once we get past the test for out_of_line_wait_on_bit() returning
ERESTARTSYS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the rpc_task is asynchronous, it could theoretically finish executing
on the workqueue it was assigned by rpc_make_runnable() before we get
round to testing RPC_IS_ASYNC() in rpc_execute.
In practice, however, all the existing callers hold a reference to the
rpc_task, so this can't happen today...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The lockless RPC_IS_QUEUED() test in __rpc_execute means that we need to
be careful about ordering the calls to rpc_test_and_set_running(task) and
rpc_clear_queued(task). If we get the order wrong, then we may end up
testing the RPC_TASK_RUNNING flag after __rpc_execute() has looped
and changed the state of the rpc_task.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
NFS calls the freezable helpers with locks held, which is unsafe
and will cause lockdep warnings when 6aa9707 "lockdep: check
that no locks held at freeze time" is reapplied (it was reverted
in dbf520a). NFS shouldn't be doing this, but it has
long-running syscalls that must hold a lock but also shouldn't
block suspend. Until NFS freeze handling is rewritten to use a
signal to exit out of the critical section, add new *_unsafe
versions of the helpers that will not run the lockdep test when
6aa9707 is reapplied, and call them from NFS.
In practice the likley result of holding the lock while freezing
is that a second task blocked on the lock will never freeze,
aborting suspend, but it is possible to manufacture a case using
the cgroup freezer, the lock, and the suspend freezer to create
a deadlock. Silencing the lockdep warning here will allow
problems to be found in other drivers that may have a more
serious deadlock risk, and prevent new problems from being added.
Signed-off-by: Colin Cross <ccross@android.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We need to be careful when testing task->tk_waitqueue in
rpc_wake_up_task_queue_locked, because it can be changed while we
are holding the queue->lock.
By adding appropriate memory barriers, we can ensure that it is safe to
test task->tk_waitqueue for equality if the RPC_TASK_QUEUED bit is set.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
This fixes a livelock in the xprt->sending queue where we end up never
making progress on lower priority tasks because sleep_on_priority()
keeps adding new tasks with the same owner to the head of the queue,
and priority bumps mean that we keep resetting the queue->owner to
whatever task is at the head of the queue.
Regression introduced by commit c05eecf636
(SUNRPC: Don't allow low priority tasks to pre-empt higher priority ones).
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the rpc_task exits while holding the socket write lock before it has
allocated an rpc slot, then the usual mechanism for releasing the write
lock in xprt_release() is defeated.
The problem occurs if the call to xprt_lock_write() initially fails, so
that the rpc_task is put on the xprt->sending wait queue. If the task
exits after being assigned the lock by __xprt_lock_write_func, but
before it has retried the call to xprt_lock_and_alloc_slot(), then
it calls xprt_release() while holding the write lock, but will
immediately exit due to the test for task->tk_rqstp != NULL.
Reported-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org [>= 3.1]
This patch ensures that we free the rpc_task after the cleanup callbacks
are done in order to avoid a deadlock problem that can be triggered if
the callback needs to wait for another workqueue item to complete.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Weston Andros Adamson <dros@netapp.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Bruce Fields <bfields@fieldses.org>
Cc: stable@vger.kernel.org
Currently, the priority queues attempt to be 'fair' to lower priority
tasks by scheduling them after a certain number of higher priority tasks
have run. The problem is that both the transport send queue and
the NFSv4.1 session slot queue have strong ordering requirements.
This patch therefore removes the fairness code in favour of strong
ordering of task priorities.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to preserve the rpc_task priority for things like writebacks,
that may have differing levels of urgency.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace two BUG_ON() calls with WARN_ON_ONCE() and early returns.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace BUG_ON() with WARN_ON_ONCE() and clean up after inactive task.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We shouldn't need more than 1 worker thread per cpu, since rpciod
is designed to run without sleeping in most cases.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Merge Andrew's second set of patches:
- MM
- a few random fixes
- a couple of RTC leftovers
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
rtc/rtc-88pm80x: remove unneed devm_kfree
rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails
mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
tmpfs: distribute interleave better across nodes
mm: remove redundant initialization
mm: warn if pg_data_t isn't initialized with zero
mips: zero out pg_data_t when it's allocated
memcg: gix memory accounting scalability in shrink_page_list
mm/sparse: remove index_init_lock
mm/sparse: more checks on mem_section number
mm/sparse: optimize sparse_index_alloc
memcg: add mem_cgroup_from_css() helper
memcg: further prevent OOM with too many dirty pages
memcg: prevent OOM with too many dirty pages
mm: mmu_notifier: fix freed page still mapped in secondary MMU
mm: memcg: only check anon swapin page charges for swap cache
mm: memcg: only check swap cache pages for repeated charging
mm: memcg: split swapin charge function into private and public part
mm: memcg: remove needless !mm fixup to init_mm when charging
mm: memcg: remove unneeded shmem charge type
...
Implement the new swapfile a_ops for NFS and hook up ->direct_IO. This
will set the NFS socket to SOCK_MEMALLOC and run socket reconnect under
PF_MEMALLOC as well as reset SOCK_MEMALLOC before engaging the protocol
->connect() method.
PF_MEMALLOC should allow the allocation of struct socket and related
objects and the early (re)setting of SOCK_MEMALLOC should allow us to
receive the packets required for the TCP connection buildup.
[jlayton@redhat.com: Restore PF_MEMALLOC task flags in all cases]
[dfeng@redhat.com: Fix handling of multiple swap files]
[a.p.zijlstra@chello.nl: Original patch]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We've had some reports of a deadlock where rpciod ends up with a stack
trace like this:
PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14"
#0 [ffff8810343bf2f0] schedule at ffffffff814dabd9
#1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs]
#2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f
#3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8
#4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs]
#5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs]
#6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670
#7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271
#8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638
#9 [ffff8810343bf818] shrink_zone at ffffffff8112788f
#10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e
#11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f
#12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad
#13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942
#14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a
#15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9
#16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b
#17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808
#18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c
#19 [ffff8810343bfce8] inet_create at ffffffff81483ba6
#20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7
#21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc]
#22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc]
#23 [ffff8810343bfe38] worker_thread at ffffffff810887d0
#24 [ffff8810343bfee8] kthread at ffffffff8108dd96
#25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca
rpciod is trying to allocate memory for a new socket to talk to the
server. The VM ends up calling ->releasepage to get more memory, and it
tries to do a blocking commit. That commit can't succeed however without
a connected socket, so we deadlock.
Fix this by setting PF_FSTRANS on the workqueue task prior to doing the
socket allocation, and having nfs_release_page check for that flag when
deciding whether to do a commit call. Also, set PF_FSTRANS
unconditionally in rpc_async_schedule since that function can also do
allocations sometimes.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
rpc_make_runnable is not generally called with the queue lock held, unless
it's waking up a task that has been sitting on a waitqueue. This is safe
when the task has not entered the FSM yet, but the comments don't really
spell this out.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The problem is that for the case of priority queues, we
have to assume that __rpc_remove_wait_queue_priority will move new
elements from the tk_wait.links lists into the queue->tasks[] list.
We therefore cannot use list_for_each_entry_safe() on queue->tasks[],
since that will skip these new tasks that __rpc_remove_wait_queue_priority
is adding.
Without this fix, rpc_wake_up and rpc_wake_up_status will both fail
to wake up all functions on priority wait queues, which can result
in some nasty hangs.
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
The tracepoint code relies on the queue->name being defined in order to
be able to display the name of the waitqueue on which an RPC task is
sleeping.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
We have to ensure that the wake up from the waitqueue and the assignment
of xprt->snd_task are atomic. We can do this by assigning the snd_task
while under the waitqueue spinlock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* master: (848 commits)
SELinux: Fix RCU deref check warning in sel_netport_insert()
binary_sysctl(): fix memory leak
mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
ipmi_watchdog: restore settings when BMC reset
oom: fix integer overflow of points in oom_badness
memcg: keep root group unchanged if creation fails
nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
nilfs2: unbreak compat ioctl
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
evm: prevent racing during tfm allocation
evm: key must be set once during initialization
mmc: vub300: fix type of firmware_rom_wait_states module parameter
Revert "mmc: enable runtime PM by default"
mmc: sdhci: remove "state" argument from sdhci_suspend_host
x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
IB/qib: Correct sense on freectxts increment and decrement
RDMA/cma: Verify private data length
cgroups: fix a css_set not found bug in cgroup_attach_proc
oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
...
Conflicts:
kernel/cgroup_freezer.c
Allow the freezer to skip wait_on_bit_killable sleeps in the sunrpc
layer. This should allow suspend and hibernate events to proceed, even
when there are RPC's pending on the wire.
Also, wrap the TASK_KILLABLE sleeps in NFS layer in freezer_do_not_count
and freezer_count calls. This allows the freezer to skip tasks that are
sleeping while looping on EJUKEBOX or NFS4ERR_DELAY sorts of errors.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
If the rpc_task gets restarted, then we want to ensure that we don't
double-count the execution time statistics, timeout data, etc.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, the caller has to change the value of task->tk_priority if
it wants to select on which priority level the task will sleep.
This patch allows the caller to select a priority level at sleep time
rather than always using task->tk_priority.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since rpc_killall_tasks may modify the rpc_task's tk_action field
without any locking, we need to be careful when dereferencing it.
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
If the NLM daemon is killed on the NFS server, we can currently end up
hanging forever on an 'unlock' request, instead of aborting. Basically,
if the rpcbind request fails, or the server keeps returning garbage, we
really want to quit instead of retrying.
Tested-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
* 'nfs-for-2.6.39' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (54 commits)
RPC: killing RPC tasks races fixed
xprt: remove redundant check
SUNRPC: Convert struct rpc_xprt to use atomic_t counters
SUNRPC: Ensure we always run the tk_callback before tk_action
sunrpc: fix printk format warning
xprt: remove redundant null check
nfs: BKL is no longer needed, so remove the include
NFS: Fix a warning in fs/nfs/idmap.c
Cleanup: Factor out some cut-and-paste code.
cleanup: save 60 lines/100 bytes by combining two mostly duplicate functions.
NFS: account direct-io into task io accounting
gss:krb5 only include enctype numbers in gm_upcall_enctypes
RPCRDMA: Fix FRMR registration/invalidate handling.
RPCRDMA: Fix to XDR page base interpretation in marshalling logic.
NFSv4: Send unmapped uid/gids to the server when using auth_sys
NFSv4: Propagate the error NFS4ERR_BADOWNER to nfs4_do_setattr
NFSv4: cleanup idmapper functions to take an nfs_server argument
NFSv4: Send unmapped uid/gids to the server if the idmapper fails
NFSv4: If the server sends us a numeric uid/gid then accept it
NFSv4.1: reject zero layout with zeroed stripe unit
...
This fixes a race in which the task->tk_callback() puts the rpc_task
to sleep, setting a new callback. Under certain circumstances, the current
code may end up executing the task->tk_action before it gets round to the
callback.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix build failure introduced by s/freezeable/freezable/
workqueue: add system_freezeable_wq
rds/ib: use system_wq instead of rds_ib_fmr_wq
net/9p: replace p9_poll_task with a work
net/9p: use system_wq instead of p9_mux_wq
xfs: convert to alloc_workqueue()
reiserfs: make commit_wq use the default concurrency level
ocfs2: use system_wq instead of ocfs2_quota_wq
ext4: convert to alloc_workqueue()
scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
misc/iwmc3200top: use system_wq instead of dedicated workqueues
i2o: use alloc_workqueue() instead of create_workqueue()
acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
fs/aio: aio_wq isn't used in memory reclaim path
input/tps6507x-ts: use system_wq instead of dedicated workqueue
cpufreq: use system_wq instead of dedicated workqueues
wireless/ipw2x00: use system_wq instead of dedicated workqueues
arm/omap: use system_wq in mailbox
workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
rpc_run_task can only fail if it is not passed in a preallocated task.
However, that is not at all clear with the current code. So
remove several impossible to occur failure checks.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
queue_work() only returns 0 or 1, never a negative value.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Although they run as rpciod background tasks, under normal operation
(i.e. no SIGKILL), functions like nfs_sillyrename(), nfs4_proc_unlck()
and nfs4_do_close() want to be fully synchronous. This means that when we
exit, we want all references to the rpc_task to be gone, and we want
any dentry references etc. held by that task to be released.
For this reason these functions call __rpc_wait_for_completion_task(),
followed by rpc_put_task() in the expectation that the latter will be
releasing the last reference to the rpc_task, and thus ensuring that the
callback_ops->rpc_release() has been called synchronously.
This patch fixes a race which exists due to the fact that
rpciod calls rpc_complete_task() (in order to wake up the callers of
__rpc_wait_for_completion_task()) and then subsequently calls
rpc_put_task() without ensuring that these two steps are done atomically.
In order to avoid adding new spin locks, the patch uses the existing
waitqueue spin lock to order the rpc_task reference count releases between
the waiting process and rpciod.
The common case where nobody is waiting for completion is optimised for by
checking if the RPC_TASK_ASYNC flag is cleared and/or if the rpc_task
reference count is 1: in those cases we drop trying to grab the spin lock,
and immediately free up the rpc_task.
Those few processes that need to put the rpc_task from inside an
asynchronous context and that do not care about ordering are given a new
helper: rpc_put_task_async().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
WQ_RESCUER is now an internal flag and should only be used in the
workqueue implementation proper. Use WQ_MEM_RECLAIM instead.
This doesn't introduce any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits)
SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred
nfs: fix unchecked value
Ask for time_delta during fsinfo probe
Revalidate caches on lock
SUNRPC: After calling xprt_release(), we must restart from call_reserve
NFSv4: Fix up the 'dircount' hint in encode_readdir
NFSv4: Clean up nfs4_decode_dirent
NFSv4: nfs4_decode_dirent must clear entry->fattr->valid
NFSv4: Fix a regression in decode_getfattr
NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer
NFS: Ensure we check all allocation return values in new readdir code
NFS: Readdir plus in v4
NFS: introduce generic decode_getattr function
NFS: check xdr_decode for errors
NFS: nfs_readdir_filler catch all errors
NFS: readdir with vmapped pages
NFS: remove page size checking code
NFS: decode_dirent should use an xdr_stream
SUNRPC: Add a helper function xdr_inline_peek
NFS: remove readdir plus limit
...
Change "return (EXPR);" to "return EXPR;"
return is not a function, parentheses are not required.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will allow us to save the original generic cred in rpc_message, so
that if we migrate from one server to another, we can generate a new bound
cred without having to punt back to the NFS layer.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that rpc_run_task() is the sole entry point for RPC calls, we can move
the remaining rpc_client-related initialisation of struct rpc_task from
sched.c into clnt.c.
Also move rpc_killall_tasks() into the same file, since that too is
relative to the rpc_clnt.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make rpc_exit() non-inline, and ensure that it always wakes up a task that
has been queued.
Kill off the now unused rpc_wake_up_task().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently RPC performance metrics that tabulate elapsed time use
jiffies time values. This is problematic on systems that use slow
jiffies (for instance 100HZ systems built for paravirtualized
environments). It is also a problem for computing precise latency
statistics for advanced network transports, such as InfiniBand,
that can have round-trip latencies significanly faster than a single
clock tick.
For the RPC client, adopt the high resolution time stamp mechanism
already used by the network layer and blktrace: ktime.
We use ktime format time stamps for all internal computations, and
convert to milliseconds for presentation. As a result, we need only
addition operations in the performance critical paths; multiply/divide
is required only for presentation.
We could report RTT metrics in microseconds. In fact the mountstats
format is versioned to accomodate exactly this kind of interface
improvement.
For now, however, we'll stay with millisecond precision for
presentation to maintain backwards compatibility with the handful of
currently deployed user space tools. At a later point, we'll move to
an API such as BDI_STATS where a finer timestamp precision can be
reported.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Also have it return an ERR_PTR(-ENOMEM) instead of a null pointer.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move struct rpc_buffer's definition into a sunrpc.h, a common, internal
header file, in preparation for supporting the nfsv4.1 backchannel.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: sunrpc: #include <linux/net.h> from sunrpc.h]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should probably not be testing any flags after we've cleared the
RPC_TASK_RUNNING flag, since rpc_make_runnable() is then free to assign the
rpc_task to another workqueue, which may then destroy it.
We can fix any races with rpc_make_runnable() by ensuring that we only
clear the RPC_TASK_RUNNING flag while holding the rpc_wait_queue->lock that
the task is supposed to be sleeping on (and then checking whether or not
the task really is sleeping).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Push it into those callback functions that actually need it.
Note that all the NFS operations use their own locking, so don't need the
BKL. Ditto for the rpcbind client.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Try to make the comment here a little more clear and concise.
Also, this macro definition seems unnecessary.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The current RPCAUTH_LOOKUP_ROOTCREDS flag only works for AUTH_SYS
authentication, and then only as a special case in the code. This patch
removes the auth_sys special casing, and replaces it with generic code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that we've tightened up the locking rules for RPC queue wakeups, we can
remove the RCU-safe kfree calls...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is designed to replace the timeout timer in the individual rpc_tasks.
By putting the timer function in the wait queue, we will eventually be able
to reduce the total number of timers in use by the RPC subsystem.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
An audit of the current RPC timeout functions shows that they don't really
ever need to run in the softirq context. As long as the softirq is
able to signal that the wakeup is due to a timeout (which it can do by
setting task->tk_status to -ETIMEDOUT) then the callback functions can just
run as standard task->tk_callback functions (in the rpciod/process
context).
The only possible border-line case would be xprt_timer() for the case of
UDP, when the callback is used to reduce the size of the transport
congestion window. In testing, however, the effect of moving that update
to a callback would appear to be minor.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In all cases where we currently use rpc_wake_up_task(), we almost always
know on which waitqueue the rpc_task is actually sleeping. This will allows
us to simplify the queue locking in a future patch.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All RPC timeout callback functions are expected to wake the task up. We can
enforce this by moving the wakeup back into rpc_run_timer.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A lot of the work done by the rpc_release() callback is inappropriate for
rpciod as it will often involve things like starting a new rpc call in
order to clean up state after an interrupted NFSv4 open() call, or
calls to mntput(), etc.
This patch allows the caller of rpc_run_task() to specify that the
rpc_release callback should run on a different workqueue than the default
rpciod_workqueue.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
Remove commented-out code copied from NFS
NFS: Switch from intr mount option to TASK_KILLABLE
Add wait_for_completion_killable
Add wait_event_killable
Add schedule_timeout_killable
Use mutex_lock_killable in vfs_readdir
Add mutex_lock_killable
Use lock_page_killable
Add lock_page_killable
Add fatal_signal_pending
Add TASK_WAKEKILL
exit: Use task_is_*
signal: Use task_is_*
sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
ptrace: Use task_is_*
power: Use task_is_*
wait: Use TASK_NORMAL
proc/base.c: Use task_is_*
proc/array.c: Use TASK_REPORT
perfmon: Use task_is_*
...
Fixed up conflicts in NFS/sunrpc manually..
We want the default scheduling priority (priority == 0) to remain
RPC_PRIORITY_NORMAL.
Also ensure that the priority wait queue scheduling is per process id
instead of sometimes being per thread, and sometimes being per inode.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The sunrpc client exports are not meant to be part of any official kernel
API: they can change at the drop of a hat. Mark them as internal functions
using EXPORT_SYMBOL_GPL.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Many-many code in the kernel initialized the timer->function
and timer->data together with calling init_timer(timer). There
is already a helper for this. Use it for networking code.
The patch is HUGE, but makes the code 130 lines shorter
(98 insertions(+), 228 deletions(-)).
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By using the TASK_KILLABLE infrastructure, we can get rid of the 'intr'
mount option. We have to use _killable everywhere instead of _interruptible
as we get rid of rpc_clnt_sigmask/sigunmask.
Signed-off-by: Liam R. Howlett <howlett@gmail.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.
The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.
[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions
As a preface to allowing arbitrary transport modules to be loaded
dynamically, add EXPORT_SYMBOL_GPL for all generic transport functions
that a transport implementation might want to use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The commit 4ada539ed7 lead to the unpleasant
possibility of an asynchronous rpc_task being required to call
rpciod_down() when it is complete. This again means that the rpciod
workqueue may get to call destroy_workqueue on itself -> hang...
Change rpciod_up/rpciod_down to just get/put the module, and then
create/destroy the workqueues on module load/unload.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Instead of taking the mutex every time we just need to increment/decrement
rpciod_users, we can optmise by using atomic_inc_not_zero and
atomic_dec_and_test.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace it with explicit calls to rpc_shutdown_client() or
rpc_destroy_client() (for the case of asynchronous calls).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
rpciod_running is not used at all, but due to the way DECLARE_MUTEX_LOCKED
works we don't get a warning for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
While the comment says:
* To prevent rpciod from hanging, this allocator never sleeps,
* returning NULL if the request cannot be serviced immediately.
The function does not actually check for NULL pointers being returned.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use a cleaner method to find the size of an rpc_buffer. This actually
works on x86-64!
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Commit c5a4dd8b7c introduced the following
compiler warnings:
net/sunrpc/sched.c:766: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'size_t'
net/sunrpc/sched.c:785: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'size_t'
- Use %zu to format size_t
- Kill 2 useless casts
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently rpc_malloc sets req->rq_buffer internally. Make this a more
generic interface: return a pointer to the new buffer (or NULL) and
make the caller set req->rq_buffer and req->rq_bufsize. This looks much
more like kmalloc and eliminates the side effects.
To fix a potential deadlock, this patch also replaces GFP_NOFS with
GFP_NOWAIT in rpc_malloc. This prevents async RPCs from sleeping outside
the RPC's task scheduler while allocating their buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The tk_pid field is an unsigned short. The proper print format specifier for
that type is %5u, not %4d.
Also clean up some miscellaneous print formatting nits.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
