mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-02-11 17:05:23 +07:00
ae5c631e60
15812 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ville Syrjälä
|
ae5c631e60 |
drm/i915: Don't try indexed reads to alternate slave addresses
We can only specify the one slave address to indexed reads/writes. Make sure the messages we check are destined to the same slave address before deciding to do an indexed transfer. Cc: stable@vger.kernel.org Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Fixes: |
||
|
Kees Cook
|
2ea5b4def9 |
drm/i915/selftests: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Linus Torvalds
|
487e2c9f44 |
AFS development
-----BEGIN PGP SIGNATURE-----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=3vy0
-----END PGP SIGNATURE-----
Merge tag 'afs-next-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"kAFS filesystem driver overhaul.
The major points of the overhaul are:
(1) Preliminary groundwork is laid for supporting network-namespacing
of kAFS. The remainder of the namespacing work requires some way
to pass namespace information to submounts triggered by an
automount. This requires something like the mount overhaul that's
in progress.
(2) sockaddr_rxrpc is used in preference to in_addr for holding
addresses internally and add support for talking to the YFS VL
server. With this, kAFS can do everything over IPv6 as well as
IPv4 if it's talking to servers that support it.
(3) Callback handling is overhauled to be generally passive rather
than active. 'Callbacks' are promises by the server to tell us
about data and metadata changes. Callbacks are now checked when
we next touch an inode rather than actively going and looking for
it where possible.
(4) File access permit caching is overhauled to store the caching
information per-inode rather than per-directory, shared over
subordinate files. Whilst older AFS servers only allow ACLs on
directories (shared to the files in that directory), newer AFS
servers break that restriction.
To improve memory usage and to make it easier to do mass-key
removal, permit combinations are cached and shared.
(5) Cell database management is overhauled to allow lighter locks to
be used and to make cell records autonomous state machines that
look after getting their own DNS records and cleaning themselves
up, in particular preventing races in acquiring and relinquishing
the fscache token for the cell.
(6) Volume caching is overhauled. The afs_vlocation record is got rid
of to simplify things and the superblock is now keyed on the cell
and the numeric volume ID only. The volume record is tied to a
superblock and normal superblock management is used to mediate
the lifetime of the volume fscache token.
(7) File server record caching is overhauled to make server records
independent of cells and volumes. A server can be in multiple
cells (in such a case, the administrator must make sure that the
VL services for all cells correctly reflect the volumes shared
between those cells).
Server records are now indexed using the UUID of the server
rather than the address since a server can have multiple
addresses.
(8) File server rotation is overhauled to handle VMOVED, VBUSY (and
similar), VOFFLINE and VNOVOL indications and to handle rotation
both of servers and addresses of those servers. The rotation will
also wait and retry if the server says it is busy.
(9) Data writeback is overhauled. Each inode no longer stores a list
of modified sections tagged with the key that authorised it in
favour of noting the modified region of a page in page->private
and storing a list of keys that made modifications in the inode.
This simplifies things and allows other keys to be used to
actually write to the server if a key that made a modification
becomes useless.
(10) Writable mmap() is implemented. This allows a kernel to be build
entirely on AFS.
Note that Pre AFS-3.4 servers are no longer supported, though this can
be added back if necessary (AFS-3.4 was released in 1998)"
* tag 'afs-next-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (35 commits)
afs: Protect call->state changes against signals
afs: Trace page dirty/clean
afs: Implement shared-writeable mmap
afs: Get rid of the afs_writeback record
afs: Introduce a file-private data record
afs: Use a dynamic port if 7001 is in use
afs: Fix directory read/modify race
afs: Trace the sending of pages
afs: Trace the initiation and completion of client calls
afs: Fix documentation on # vs % prefix in mount source specification
afs: Fix total-length calculation for multiple-page send
afs: Only progress call state at end of Tx phase from rxrpc callback
afs: Make use of the YFS service upgrade to fully support IPv6
afs: Overhaul volume and server record caching and fileserver rotation
afs: Move server rotation code into its own file
afs: Add an address list concept
afs: Overhaul cell database management
afs: Overhaul permit caching
afs: Overhaul the callback handling
afs: Rename struct afs_call server member to cm_server
...
|
||
|
Linus Torvalds
|
e60e1ee606 |
main drm pull request for v4.15
-----BEGIN PGP SIGNATURE-----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=xVV2
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
|
||
|
Mel Gorman
|
c6f92f9fbe |
mm: remove cold parameter for release_pages
All callers of release_pages claim the pages being released are cache hot. As no one cares about the hotness of pages being released to the allocator, just ditch the parameter. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. Link: http://lkml.kernel.org/r/20171018075952.10627-7-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
8667982014 |
mm, pagevec: remove cold parameter for pagevecs
Every pagevec_init user claims the pages being released are hot even in cases where it is unlikely the pages are hot. As no one cares about the hotness of pages being released to the allocator, just ditch the parameter. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
bd2cd7d5a8 |
Power management updates for v4.15-rc1
- Relocate the OPP (Operating Performance Points) framework to its
own directory under drivers/ and add support for power domain
performance states to it (Viresh Kumar).
- Modify the PM core, the PCI bus type and the ACPI PM domain to
support power management driver flags allowing device drivers to
specify their capabilities and preferences regarding the handling
of devices with enabled runtime PM during system suspend/resume
and clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
- Add frequency-invariant accounting support to the task scheduler
on ARM and ARM64 (Dietmar Eggemann).
- Fix PM QoS device resume latency framework to prevent "no
restriction" requests from overriding requests with specific
requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
device PM QoS flag (Rafael Wysocki).
- Drop legacy class suspend/resume operations from the PM core
and drop legacy bus type suspend and resume callbacks from
ARM/locomo (Rafael Wysocki).
- Add min/max frequency support to devfreq and clean it up
somewhat (Chanwoo Choi).
- Rework wakeup support in the generic power domains (genpd)
framework and update some of its users accordingly (Geert
Uytterhoeven).
- Convert timers in the PM core to use timer_setup() (Kees Cook).
- Add support for exposing the SLP_S0 (Low Power S0 Idle)
residency counter based on the LPIT ACPI table on Intel
platforms (Srinivas Pandruvada).
- Add per-CPU PM QoS resume latency support to the ladder cpuidle
governor (Ramesh Thomas).
- Fix a deadlock between the wakeup notify handler and the
notifier removal in the ACPI core (Ville Syrjälä).
- Fix a cpufreq schedutil governor issue causing it to use
stale cached frequency values sometimes (Viresh Kumar).
- Fix an issue in the system suspend core support code causing
wakeup events detection to fail in some cases (Rajat Jain).
- Fix the generic power domains (genpd) framework to prevent
the PM core from using the direct-complete optimization with
it as that is guaranteed to fail (Ulf Hansson).
- Fix a minor issue in the cpuidle core and clean it up a bit
(Gaurav Jindal, Nicholas Piggin).
- Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
Baron, Len Brown, Leo Yan).
- Fix a couple of minor issues in the OPP framework and clean it
up (Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
- Fix and clean up some cpufreq drivers and fix a minor issue in
the cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
Yamada, Robert Jarzmik, Zumeng Chen).
- Fix minor issues in the system suspend and hibernation core, in
power management documentation and in the AVS (Adaptive Voltage
Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches,
Rafael Wysocki).
- Fix some issues in the cpupower utility and document that Shuah
Khan is going to maintain it going forward (Prarit Bhargava,
Shuah Khan).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QTnx
-----END PGP SIGNATURE-----
Merge tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are no real big ticket items here this time.
The most noticeable change is probably the relocation of the OPP
(Operating Performance Points) framework to its own directory under
drivers/ as it has grown big enough for that. Also Viresh is now going
to maintain it and send pull requests for it to me, so you will see
this change in the git history going forward (but still not right
now).
Another noticeable set of changes is the modifications of the PM core,
the PCI subsystem and the ACPI PM domain to allow of more integration
between system-wide suspend/resume and runtime PM. For now it's just a
way to avoid resuming devices from runtime suspend unnecessarily
during system suspend (if the driver sets a flag to indicate its
readiness for that) and in the works is an analogous mechanism to
allow devices to stay suspended after system resume.
In addition to that, we have some changes related to supporting
frequency-invariant CPU utilization metrics in the scheduler and in
the schedutil cpufreq governor on ARM and changes to add support for
device performance states to the generic power domains (genpd)
framework.
The rest is mostly fixes and cleanups of various sorts.
Specifics:
- Relocate the OPP (Operating Performance Points) framework to its
own directory under drivers/ and add support for power domain
performance states to it (Viresh Kumar).
- Modify the PM core, the PCI bus type and the ACPI PM domain to
support power management driver flags allowing device drivers to
specify their capabilities and preferences regarding the handling
of devices with enabled runtime PM during system suspend/resume and
clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
- Add frequency-invariant accounting support to the task scheduler on
ARM and ARM64 (Dietmar Eggemann).
- Fix PM QoS device resume latency framework to prevent "no
restriction" requests from overriding requests with specific
requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
device PM QoS flag (Rafael Wysocki).
- Drop legacy class suspend/resume operations from the PM core and
drop legacy bus type suspend and resume callbacks from ARM/locomo
(Rafael Wysocki).
- Add min/max frequency support to devfreq and clean it up somewhat
(Chanwoo Choi).
- Rework wakeup support in the generic power domains (genpd)
framework and update some of its users accordingly (Geert
Uytterhoeven).
- Convert timers in the PM core to use timer_setup() (Kees Cook).
- Add support for exposing the SLP_S0 (Low Power S0 Idle) residency
counter based on the LPIT ACPI table on Intel platforms (Srinivas
Pandruvada).
- Add per-CPU PM QoS resume latency support to the ladder cpuidle
governor (Ramesh Thomas).
- Fix a deadlock between the wakeup notify handler and the notifier
removal in the ACPI core (Ville Syrjälä).
- Fix a cpufreq schedutil governor issue causing it to use stale
cached frequency values sometimes (Viresh Kumar).
- Fix an issue in the system suspend core support code causing wakeup
events detection to fail in some cases (Rajat Jain).
- Fix the generic power domains (genpd) framework to prevent the PM
core from using the direct-complete optimization with it as that is
guaranteed to fail (Ulf Hansson).
- Fix a minor issue in the cpuidle core and clean it up a bit (Gaurav
Jindal, Nicholas Piggin).
- Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
Baron, Len Brown, Leo Yan).
- Fix a couple of minor issues in the OPP framework and clean it up
(Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
- Fix and clean up some cpufreq drivers and fix a minor issue in the
cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
Yamada, Robert Jarzmik, Zumeng Chen).
- Fix minor issues in the system suspend and hibernation core, in
power management documentation and in the AVS (Adaptive Voltage
Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches, Rafael
Wysocki).
- Fix some issues in the cpupower utility and document that Shuah
Khan is going to maintain it going forward (Prarit Bhargava, Shuah
Khan)"
* tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (88 commits)
tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
tools/power/cpupower: Add 64 bit library detection
intel_idle: Graceful probe failure when MWAIT is disabled
cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq
freezer: Fix typo in freezable_schedule_timeout() comment
PM / s2idle: Clear the events_check_enabled flag
cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
cpufreq: arm_big_little: make function arguments and structure pointer const
cpuidle: Avoid assignment in if () argument
cpuidle: Clean up cpuidle_enable_device() error handling a bit
ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock
PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
cpuidle: ladder: Add per CPU PM QoS resume latency support
PM / QoS: Fix device resume latency framework
PM / domains: Rework governor code to be more consistent
PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
...
|
||
|
David Howells
|
5e4def2038 |
Pass mode to wait_on_atomic_t() action funcs and provide default actions
Make wait_on_atomic_t() pass the TASK_* mode onto its action function as an extra argument and make it 'unsigned int throughout. Also, consolidate a bunch of identical action functions into a default function that can do the appropriate thing for the mode. Also, change the argument name in the bit_wait*() function declarations to reflect the fact that it's the mode and not the bit number. [Peter Z gives this a grudging ACK, but thinks that the whole atomic_t wait should be done differently, though he's not immediately sure as to how] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> cc: Ingo Molnar <mingo@kernel.org> |
||
|
Rafael J. Wysocki
|
1efef68262 |
Merge branch 'pm-core'
* pm-core: ACPI / PM: Take SMART_SUSPEND driver flag into account PCI / PM: Take SMART_SUSPEND driver flag into account PCI / PM: Drop unnecessary invocations of pcibios_pm_ops callbacks PM / core: Add SMART_SUSPEND driver flag PCI / PM: Use the NEVER_SKIP driver flag PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags PM / core: Convert timers to use timer_setup() PM / core: Fix kerneldoc comments of four functions PM / core: Drop legacy class suspend/resume operations |
||
|
Chris Wilson
|
e8c49fa968 |
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
When we close the VMA, we unbind it from the ppgtt and tear down the page directory pointing at it. That may trigger us to return WC pages back to the system, requiring conversion back to WB which itself may sleep. That makes i915_vma_close() unsuitable for use inside the RCU read lock, which we need to hold to iterate the radixtree. The fix is quite simple, we can close all the VMA as we close the ppgtt, we only need to do that instead of closing them during destruction of the LUT. v2: Order between closing the LUT and the ppgtt is important; we use the vma inside the LUT as a means of retrieving the object, and so we must clear the LUT before freeing the VMA when closing the ppgtt. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103638 Fixes: |
||
|
Ville Syrjälä
|
6ac4327276 |
drm/i915: Move init_clock_gating() back to where it was
Apparently setting up a bunch of GT registers before we've properly initialized the rest of the GT hardware leads to these setting being lost. So looks like I broke HSW with commit |
||
|
Chris Wilson
|
398c13b963 |
drm/i915: Prune the reservation shared fence array
The shared fence array is not autopruning and may continue to grow as an object is shared between new timelines. Take the opportunity when we think the object is idle (we have to confirm that any external fence is also signaled) to decouple all the fences. We apply a similar trick after waiting on an object, see commit |
||
|
Chris Wilson
|
0676e79415 |
drm/i915: Idle the GPU before shinking everything
The handling of contexts are peculiar. Instead of tieing their vma to activity, we pin the context. This means that we cannot simply unbind the context object itself at will (which would normally cause us to wait for the vma to be idle), but must manually idle the GPU and retire requests first. A consequence of this peculiarity is when doing a last desperate attempt to recover memory. If the memory is tied up inside active context objects, we will fail to recover any memory simply by trying to unbind the objects without first doing a wait-for-idle. A side-effect of removing the call to shrinker_lock_uninterruptible() from i915_gem_shrinker_oom() was that we removed an unlocked wait-for-idle, and so lost the "natural" shrinkage of context objects. By replacing that with a locked wait from inside i915_gem_shrink(), we not only replace it with the ability to recover all context objects, but do so for all i915_gem_shrink_all() callers. v2: Switching requires request allocation, which is not permitted from inside the shrinker as it only uses ordinary allocations. References: https://bugs.freedesktop.org/show_bug.cgi?id=102936 Fixes: |
||
|
Chris Wilson
|
0f763ff370 |
drm/i915: Lock llist_del_first() vs llist_del_all()
An oversight in commit |
||
|
Maarten Lankhorst
|
90c702b88e |
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
The watermarks it should calculate against are the old optimal watermarks.
The currently active crtc watermarks are pure fiction, and are invalid in
case of a nonblocking modeset, page flip enabling/disabling planes or any
other reason.
When the crtc is disabled or during a modeset the intermediate watermarks
don't need to be programmed separately, and could be directly assigned
to the optimal watermarks.
Changes since v1:
- Use intel_atomic_get_old_crtc_state. (ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-2-maarten.lankhorst@linux.intel.com
[mlankhorst: Add cc stable and bugzilla link, since previous patch doesn't fix issue by itself]
Cc: stable@vger.kernel.org #v4.8+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
(cherry picked from commit
|
||
|
Joonas Lahtinen
|
b58d4bef10 |
drm/i915: Disable lazy PPGTT page table optimization for vGPU
When running under virtualization (vGPU active), we must disable the lazy PPGTT page table initialization optimization introduced by commit |
||
|
Chris Wilson
|
a2487174af |
drm/i915/execlists: Remove the priority "optimisation"
Originally we set the priority to max upon inserting the request into the execlists queue (and removing it from the scheduler lists). We could then use the prio==INT_MAX as a shortcut within execlists_schedule() to detect the end of the dependency chain. Since commit |
||
|
Chris Wilson
|
5d26669237 |
drm/i915: Filter out spurious execlists context-switch interrupts
Back in commit |
||
|
Chris Wilson
|
423a8a942e |
drm/i915: Deconstruct struct sgt_dma initialiser
gcc-4.4 complains about:
struct sgt_dma iter = {
.sg = vma->pages->sgl,
.dma = sg_dma_address(iter.sg),
.max = iter.dma + iter.sg->length,
};
drivers/gpu/drm/i915/i915_gem_gtt.c: In function ‘gen8_ppgtt_insert_4lvl’:
drivers/gpu/drm/i915/i915_gem_gtt.c:938: error: ‘iter.sg’ is used uninitialized in this function
drivers/gpu/drm/i915/i915_gem_gtt.c:939: error: ‘iter.dma’ is used uninitialized in this function
and worse generates invalid code that triggers a GPF:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915]
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: snd_aloop nf_conntrack_ipv6 nf_defrag_ipv6 nf_log_ipv6 ip6table_filter ip6_tables ctr ccm xt_state nf_log_ipv4
nf_log_common xt_LOG xt_limit xt_recent xt_owner xt_addrtype iptable_filter ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat
nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c ip_tables dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm
irqbypass uas usb_storage hid_multitouch btusb btrtl uvcvideo videobuf2_v4l2 videobuf2_core videodev media videobuf2_vmalloc videobuf2_memops
sg ppdev dell_wmi sparse_keymap mei_wdt sd_mod iTCO_wdt iTCO_vendor_support rtsx_pci_ms memstick rtsx_pci_sdmmc mmc_core dell_smm_hwmon hwmon
dell_laptop dell_smbios dcdbas joydev input_leds hci_uart btintel btqca btbcm bluetooth parport_pc parport i2c_hid
intel_lpss_acpi intel_lpss pcspkr wmi int3400_thermal acpi_thermal_rel dell_rbtn mei_me mei snd_hda_codec_hdmi snd_hda_codec_realtek
snd_hda_codec_generic ahci libahci acpi_pad xhci_pci xhci_hcd snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device
snd_pcm snd_timer snd soundcore int3403_thermal arc4 e1000e ptp pps_core i2c_i801 iwlmvm mac80211 rtsx_pci iwlwifi cfg80211 rfkill
intel_pch_thermal processor_thermal_device int340x_thermal_zone intel_soc_dts_iosf i915 video fjes
CPU: 2 PID: 2408 Comm: X Not tainted 4.10.0-rc5+ #1
Hardware name: Dell Inc. Latitude E7470/0T6HHJ, BIOS 1.11.3 11/09/2016
task: ffff880219fe4740 task.stack: ffffc90005f98000
RIP: 0010:gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915]
RSP: 0018:ffffc90005f9b8c8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8802167d8000 RCX: 0000000000000001
RDX: 00000000ffff7000 RSI: ffff880219f94140 RDI: ffff880228444000
RBP: ffffc90005f9b948 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000080
R13: 0000000000000001 R14: ffffc90005f9bcd7 R15: ffff88020c9a83c0
FS: 00007fb53e1ee920(0000) GS:ffff88024dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000022ef95000 CR4: 00000000003406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ppgtt_bind_vma+0x40/0x50 [i915]
i915_vma_bind+0xcb/0x1c0 [i915]
__i915_vma_do_pin+0x6e/0xd0 [i915]
i915_gem_execbuffer_reserve_vma+0x162/0x1d0 [i915]
i915_gem_execbuffer_reserve+0x4fc/0x510 [i915]
? __kmalloc+0x134/0x250
? i915_gem_wait_for_error+0x25/0x100 [i915]
? i915_gem_wait_for_error+0x25/0x100 [i915]
i915_gem_do_execbuffer+0x2df/0xa00 [i915]
? drm_malloc_gfp.clone.0+0x42/0x80 [i915]
? path_put+0x22/0x30
? __check_object_size+0x62/0x1f0
? terminate_walk+0x44/0x90
i915_gem_execbuffer2+0x95/0x1e0 [i915]
drm_ioctl+0x243/0x490
? handle_pte_fault+0x1d7/0x220
? i915_gem_do_execbuffer+0xa00/0xa00 [i915]
? handle_mm_fault+0x10d/0x2a0
vfs_ioctl+0x18/0x30
do_vfs_ioctl+0x14b/0x3f0
SyS_ioctl+0x92/0xa0
entry_SYSCALL_64_fastpath+0x1a/0xa9
RIP: 0033:0x7fb53b4fcb77
RSP: 002b:00007ffe0c572898 EFLAGS: 00003246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fb53e17c038 RCX: 00007fb53b4fcb77
RDX: 00007ffe0c572900 RSI: 0000000040406469 RDI: 000000000000000b
RBP: 00007fb5376d67e0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000028 R11: 0000000000003246 R12: 0000000000000000
R13: 0000000000000000 R14: 000055eecb314d00 R15: 000055eecb315460
Code: 0f 84 5d ff ff ff eb a2 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 58 0f 1f 44 00 00 31 c0 89 4d b0 <4c>
8b 60 10 44 8b 70 0c 48 89 d0 4c 8b 2e 48 c1 e8 27 25 ff 01
RIP: gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] RSP: ffffc90005f9b8c8
CR2: 0000000000000010
Recent gccs, such as 4.9, 6.3 or 7.2, do not generate the warning nor do
they explode on use. If we manually create the struct using locals from
the stack, this should eliminate this issue, and does not alter code
generation with gcc-7.2.
Fixes:
|
||
|
Tvrtko Ursulin
|
40a4884512 |
drm/i915: Reject unknown syncobj flags
We have to reject unknown flags for uAPI considerations, and also because the curent implementation limits their i915 storage space to two bits. v2: (Chris Wilson) * Fix fail in ABI check. * Added unknown flags and BUILD_BUG_ON. v3: * Use ARCH_KMALLOC_MINALIGN instead of alignof. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: |
||
|
Rafael J. Wysocki
|
c2eac4d3a1 |
PCI / PM: Use the NEVER_SKIP driver flag
Replace the PCI-specific flag PCI_DEV_FLAGS_NEEDS_RESUME with the PM core's DPM_FLAG_NEVER_SKIP one everywhere and drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
Dave Airlie
|
36a5fdf76d |
This time really the last i915 batch for v4.15:
- PSR state tracking in crtc state (Ville) - Fix eviction when the GGTT is idle but full (Chris) - BDW DP aux channel timeout fix (James) - LSPCON detection fixes (Shashank) - Use for_each_pipe to iterate over pipes (Mika Kahola) - Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha) - Refactoring and preparation for DDI encoder type cleanup (Ville) - Broadwell DDI FDI buf translation fix (Chris) - Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan) - GuC/HuC firmware loader refactoring (Michal) - Make shrinking more effective and not stall so much (Chris) - Cannonlake PLL fixes (Rodrigo) - DP MST connector error propagation fixes (James) - Convert timers to use timer_setup (Kees Cook) - Skylake plane enable/disable unification (Juha-Pekka) - Fix to actually free driver internal objects when requested (Chris) - DDI buf trans refactoring (Ville) - Skip waking the device to service pwrite (Chris) - Improve DSI VBT backlight parsing abstraction (Madhav) - Cannonlake VBT DDC pin mapping fix (Rodrigo) -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEFWWmW3ewYy4RJOWc05gHnSar7m8FAlntvmAACgkQ05gHnSar 7m+W6g//bA7dZdhGfX01Ad/BvRR0gCays9LWyH5DZX5o34kEX5JgPZjesv+k2wmR ecpD9s29qXnnkDeQUU/oO0fd/K1/6i2/EyJuIHpe3j1zASRzMqUwZGz05ot2iyYG uS7l92P+QwCdKYWbKEn8gRzVwbmr3HZ4Hg5HVK81jQodObM9Gccp/Yk1olOm9WvN h/+uvBfKlDjBnHw0IrFvFq+woUIdJ1bzAQ4g+/QRdPWlE9rDa0qvGMvvar90tPcA FHGB71gaTZdAVtlF4XfQ1xOn5SmGJhc6NihdB00yR3H0/UVUClD9zwx4kLwYHD7P +fkKPFFhuDqzWLQonJW57ijBgFp1ygLnHg59ttENAQuwiZj9prOIdkduSvHEOWva g2DjeZ1csM79MfsvTOeV4MzY38q5NFBOixK6EsPurkyyFWE34L2gCKN5TBeNYsUc yuSZAmh92JcDZV8P2SlNHx09qjjmG48FrDr7fkWG/2pFBXbIpHiltF63q20HHfBe D3h7QgCipdGXJ/mk7Z8tpWrkn+ALddyShtQqAiTEHl7BGpdNFHECWl93LWFdqKfC rLolhJui936qJhiA6+fZqFEUtvgb7HHJPTQE5EOgu/15/H+DylPE5jFdHvH/P07v yqi6N6SLVTTxvudqv75GyKh53i9bzSrWHldCAacWmDtUGkEyAvM= =fQeu -----END PGP SIGNATURE----- Merge tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next This time really the last i915 batch for v4.15: - PSR state tracking in crtc state (Ville) - Fix eviction when the GGTT is idle but full (Chris) - BDW DP aux channel timeout fix (James) - LSPCON detection fixes (Shashank) - Use for_each_pipe to iterate over pipes (Mika Kahola) - Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha) - Refactoring and preparation for DDI encoder type cleanup (Ville) - Broadwell DDI FDI buf translation fix (Chris) - Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan) - GuC/HuC firmware loader refactoring (Michal) - Make shrinking more effective and not stall so much (Chris) - Cannonlake PLL fixes (Rodrigo) - DP MST connector error propagation fixes (James) - Convert timers to use timer_setup (Kees Cook) - Skylake plane enable/disable unification (Juha-Pekka) - Fix to actually free driver internal objects when requested (Chris) - DDI buf trans refactoring (Ville) - Skip waking the device to service pwrite (Chris) - Improve DSI VBT backlight parsing abstraction (Madhav) - Cannonlake VBT DDC pin mapping fix (Rodrigo) * tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits) drm/i915: Update DRIVER_DATE to 20171023 drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin. drm/i915: Let's use more enum intel_dpll_id pll_id. drm/i915: Use existing DSI backlight ports info drm/i915: Parse DSI backlight/cabc ports. drm/i915: Skip waking the device to service pwrite drm/i915/crt: split compute_config hook by platforms drm/i915: remove g4x lowfreq_avail and has_pipe_cxsr drm/i915: Drop the redundant hdmi prefix/suffix from a lot of variables drm/i915: Unify error handling for missing DDI buf trans tables drm/i915: Centralize the SKL DDI A/E vs. B/C/D buf trans handling drm/i915: Kill off the BXT buf_trans default_index drm/i915: Pass encoder type to cnl_ddi_vswing_sequence() explicitly drm/i915: Integrate BXT into intel_ddi_dp_voltage_max() drm/i915: Pass the level to intel_prepare_hdmi_ddi_buffers() drm/i915: Pass the encoder type explicitly to skl_set_iboost() drm/i915: Extract intel_ddi_get_buf_trans_hdmi() drm/i915: Relocate intel_ddi_get_buf_trans_*() functions drm/i915: Flush the idle-worker for debugfs/i915_drop_caches drm/i915: adjust get_crtc_fence_y_offset() to use base.y instead of crtc.y ... |
||
|
Linus Torvalds
|
e65a139d5b |
i915, amdgpu and nouveau fixes
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZ+/SnAAoJEAx081l5xIa+mv4QAKxWFXqIuhIrE1K8iSkM43Tc 9xbUbsmE0HKDn1xJmklP3upGdUzv9BBrEN+tPW6t+BfJ+swVBKdtx1lZc/k9mQ9m iLpWlefS/zc71Jpw4wGQ6Ky5gNrYkEH57D6rZs9gHYZ4TzoVGJhOPG9EGzuokU9i Cl0MXmAzr7XVCydtcmbX6NvwG4h+UmMxOCbeOjev8mJSNes/ssc8iUpE/Dx0qO5d nUK23NipTKG1xuaPDVGqC3VvXvhur9l5V/YiAYbAckAt85d2VjX6b4VqjagnlL1Z DhwNuWXwfqdzddec1j5ME/OPVw4npdeMh3mgZgMgXKzJjTwxQk3Uw5Qg0gqf5OIz xNv1BGJ8hV93wgAicfSRA1mVqpFl16hOzK5sNXJM4vsTuVS90y32Mkow17kXNz2m sD0vm3joldO3fe0DQy5huAUMmiQDl9dVcsXIM/xRt2GdGd7dHdwc0ODSI241pecr SgpePYAsp/ISR2tW4+9u8+ol4GN06gXXX9KxZW59XwglqQM2sHC4UGPXQt0Fl/f2 xh7PxE4er9qmDcc7/VyAMpeeUCLguEeFFDz5X5A2pd08cgZR++1+TOj9HBuSh1Ko se3zakshB8zdWBdSIEFCOnBV6kJR59Vs3a6F6XQ8jqubzPp/Dv51cvz2Y59smRgV A/30msWIALKTm2kV32/h =s45z -----END PGP SIGNATURE----- Merge tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: - one nouveau regression fix - some amdgpu fixes for stable to fix hangs on some harvested Polaris GPUs - a set of KASAN and regression fixes for i915, their CI system seems to be working pretty well now. * tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: allow harvesting check for Polaris VCE drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting drm/i915: Check incoming alignment for unfenced buffers (on i915gm) drm/nouveau/kms/nv50: use the correct state for base channel notifier setup drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr) drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects) drm/i915/edp: read edp display control registers unconditionally drm/i915: Do not rely on wm preservation for ILK watermarks drm/i915: Cancel the modeset retry work during modeset cleanup |
||
|
Linus Torvalds
|
ead751507d |
License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
||
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Dave Airlie
|
7a88cbd8d6 |
Linux 4.14-rc7
-----BEGIN PGP SIGNATURE----- iQEcBAABAgAGBQJZ9kEFAAoJEHm+PkMAQRiGw6wH/0j197qyGd0hkVFMJO6LAgN3 KQWS4nZ5BkVDocwv0RVnUJTtXqU1eozFgdVEtSoaFXpzlHGuptR2Tau9efDCJ7w3 /utZxqvhGebZd2T+j+/o/LE8BRQxhADBNJq2D/o0WNt8ecxuG0GIkhkEYt/o3z1v /sxlwVwzXB7Dc/h1WcgGJG7cS6L9KzzAzGAS/iNvdFrPOygHBv8c0MxVZIiBIeeK 1nZdyvbyM8uenSyG+prGt9ENrqXZxxfwUxIchi2V7A9m1WmD5zijNkf1JCWji/O+ UsA1auxna7MwoxjxqZuGm4MlKOwZ+8xutk4JGgc+aP/ulndJbJYu+4op/3vaFBM= =Mhx+ -----END PGP SIGNATURE----- Backmerge tag 'v4.14-rc7' into drm-next Linux 4.14-rc7 Requested by Ben Skeggs for nouveau to avoid major conflicts, and things were getting a bit conflicty already, esp around amdgpu reverts. |
||
|
Chris Wilson
|
bb5cf33863 |
drm/i915: Check incoming alignment for unfenced buffers (on i915gm)
In case the object has changed tiling between calls to execbuf, we need to check if the existing offset inside the GTT matches the new tiling constraint. We even need to do this for "unfenced" tiled objects, where the 3D commands use an implied fence and so the object still needs to match the physical fence restrictions on alignment (only required for gen2 and early gen3). In commit |
||
|
Chris Wilson
|
dc35b1129c |
drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)
Kasan spotted
[IGT] gem_tiled_pread_pwrite: exiting, ret=0
==================================================================
BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182
CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1
Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017
Workqueue: events __i915_gem_free_work [i915]
Call Trace:
dump_stack+0x68/0xa0
print_address_description+0x78/0x290
? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
kasan_report+0x23d/0x350
__asan_report_load8_noabort+0x19/0x20
__i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
? i915_gem_object_truncate+0x100/0x100 [i915]
? lock_acquire+0x380/0x380
__i915_gem_object_put_pages+0x30d/0x530 [i915]
__i915_gem_free_objects+0x551/0xbd0 [i915]
? lock_acquire+0x13e/0x380
__i915_gem_free_work+0x4e/0x70 [i915]
process_one_work+0x6f6/0x1590
? pwq_dec_nr_in_flight+0x2b0/0x2b0
worker_thread+0xe6/0xe90
? pci_mmcfg_check_reserved+0x110/0x110
kthread+0x309/0x410
? process_one_work+0x1590/0x1590
? kthread_create_on_node+0xb0/0xb0
ret_from_fork+0x27/0x40
Allocated by task 1801:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xee/0x190
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xdc/0x2e0
radix_tree_node_alloc.constprop.12+0x48/0x330
__radix_tree_create+0x274/0x480
__radix_tree_insert+0xa2/0x610
i915_gem_object_get_sg+0x224/0x670 [i915]
i915_gem_object_get_page+0xb5/0x1c0 [i915]
i915_gem_pread_ioctl+0x822/0xf60 [i915]
drm_ioctl_kernel+0x13f/0x1c0
drm_ioctl+0x6cf/0x980
do_vfs_ioctl+0x184/0xf30
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
Freed by task 37:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xaf/0x190
kmem_cache_free+0xbf/0x340
radix_tree_node_rcu_free+0x79/0x90
rcu_process_callbacks+0x46d/0xf40
__do_softirq+0x21c/0x8d3
The buggy address belongs to the object at ffff8801359da0f0
which belongs to the cache radix_tree_node of size 576
The buggy address is located 544 bytes inside of
576-byte region [ffff8801359da0f0, ffff8801359da330)
The buggy address belongs to the page:
page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011
raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
^
ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
which looks like the slab containing the radixtree iter was freed as we
traversed the tree, taking the rcu read lock across the loop should
prevent that (deferring all the frees until the end).
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Fixes:
|
||
|
Chris Wilson
|
23e873389d |
drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects)
Kasan spotted
[IGT] gem_tiled_pread_pwrite: exiting, ret=0
==================================================================
BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182
CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1
Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017
Workqueue: events __i915_gem_free_work [i915]
Call Trace:
dump_stack+0x68/0xa0
print_address_description+0x78/0x290
? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
kasan_report+0x23d/0x350
__asan_report_load8_noabort+0x19/0x20
__i915_gem_object_reset_page_iter+0x15c/0x170 [i915]
? i915_gem_object_truncate+0x100/0x100 [i915]
? lock_acquire+0x380/0x380
__i915_gem_object_put_pages+0x30d/0x530 [i915]
__i915_gem_free_objects+0x551/0xbd0 [i915]
? lock_acquire+0x13e/0x380
__i915_gem_free_work+0x4e/0x70 [i915]
process_one_work+0x6f6/0x1590
? pwq_dec_nr_in_flight+0x2b0/0x2b0
worker_thread+0xe6/0xe90
? pci_mmcfg_check_reserved+0x110/0x110
kthread+0x309/0x410
? process_one_work+0x1590/0x1590
? kthread_create_on_node+0xb0/0xb0
ret_from_fork+0x27/0x40
Allocated by task 1801:
save_stack_trace+0x1b/0x20
kasan_kmalloc+0xee/0x190
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xdc/0x2e0
radix_tree_node_alloc.constprop.12+0x48/0x330
__radix_tree_create+0x274/0x480
__radix_tree_insert+0xa2/0x610
i915_gem_object_get_sg+0x224/0x670 [i915]
i915_gem_object_get_page+0xb5/0x1c0 [i915]
i915_gem_pread_ioctl+0x822/0xf60 [i915]
drm_ioctl_kernel+0x13f/0x1c0
drm_ioctl+0x6cf/0x980
do_vfs_ioctl+0x184/0xf30
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
Freed by task 37:
save_stack_trace+0x1b/0x20
kasan_slab_free+0xaf/0x190
kmem_cache_free+0xbf/0x340
radix_tree_node_rcu_free+0x79/0x90
rcu_process_callbacks+0x46d/0xf40
__do_softirq+0x21c/0x8d3
The buggy address belongs to the object at ffff8801359da0f0
which belongs to the cache radix_tree_node of size 576
The buggy address is located 544 bytes inside of
576-byte region [ffff8801359da0f0, ffff8801359da330)
The buggy address belongs to the page:
page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x8000000000008100(slab|head)
raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011
raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
^
ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
which looks like the slab containing the radixtree iter was freed as we
traversed the tree, taking the rcu read lock across the loop should
prevent that (deferring all the frees until the end).
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Fixes:
|
||
|
Jani Nikula
|
7c838e2a9b |
drm/i915/edp: read edp display control registers unconditionally
Per my reading of the eDP spec, DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in
DP_EDP_CONFIGURATION_CAP should be set if the eDP display control
registers starting at offset DP_EDP_DPCD_REV are "enabled". Currently we
check the bit before reading the registers, and DP_EDP_DPCD_REV is the
only way to detect eDP revision.
Turns out there are (likely buggy) displays that require eDP 1.4+
features, such as supported link rates and link rate select, but do not
have the bit set. Read the display control registers
unconditionally. They are supposed to read zero anyway if they are not
supported, so there should be no harm in this.
This fixes the referenced bug by enabling the eDP version check, and
thus reading of the supported link rates. The panel in question has 0 in
DP_MAX_LINK_RATE which is only supported in eDP 1.4+. Without the
supported link rates method we default to RBR which is insufficient for
the panel native mode. As a curiosity, the panel also has a bogus value
of 0x12 in DP_EDP_DPCD_REV, but that passes our check for >= DP_EDP_14
(which is 0x03).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103400
Reported-and-tested-by: Nicolas P. <issun.artiste@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026142932.17737-1-jani.nikula@intel.com
(cherry picked from commit
|
||
|
Maarten Lankhorst
|
8777b927b9 |
drm/i915: Do not rely on wm preservation for ILK watermarks
The original intent was to preserve watermarks as much as possible
in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm.
It seems this approach is insufficient and we don't always preserve
the raw watermarks, so just use the atomic iterator we're already using
to get a const pointer to all bound planes on the crtc.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org #v4.8+
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit
|
||
|
Manasi Navare
|
713946d16f |
drm/i915: Cancel the modeset retry work during modeset cleanup
During modeset cleanup on driver unload we may have a pending hotplug work. This needs to be canceled early during the teardown so that it does not fire after we have freed the connector. We do this after drm_kms_helper_poll_fini(dev) since this might trigger modeset retry work due to link retrain and before intel_fbdev_fini() since this work requires the lock from fbdev. If this is not done we may see something like: DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) ------------[ cut here ]------------ WARNING: CPU: 4 PID: 5010 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x4e/0x60 Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178 +a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid +[last unloaded: snd_hda_intel] CPU: 4 PID: 5010 Comm: drv_module_relo Tainted: G U 4.14.0-rc3-CI-CI_DRM_3186+ #1 Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017 task: ffff8803c827aa40 task.stack: ffffc90000520000 RIP: 0010:mutex_destroy+0x4e/0x60 RSP: 0018:ffffc90000523d58 EFLAGS: 00010292 RAX: 000000000000002a RBX: ffff88044fbef648 RCX: 0000000000000000 RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810f0cf0 RBP: ffffc90000523d60 R08: 0000000000000001 R09: 0000000000000001 R10: 000000000f21cb81 R11: 0000000000000000 R12: ffff88044f71efc8 R13: ffffffffa02b3d20 R14: ffffffffa02b3d90 R15: ffff880459b29308 FS: 00007f5df4d6e8c0(0000) GS:ffff88045d300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ec51f00a18 CR3: 0000000451782006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: drm_fb_helper_fini+0xd9/0x130 intel_fbdev_destroy+0x12/0x60 [i915] intel_fbdev_fini+0x28/0x30 [i915] intel_modeset_cleanup+0x45/0xa0 [i915] i915_driver_unload+0x92/0x180 [i915] i915_pci_remove+0x19/0x30 [i915] i915_driver_unload+0x92/0x180 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x39/0xb0 device_release_driver_internal+0x15d/0x220 driver_detach+0x40/0x80 bus_remove_driver+0x58/0xd0 driver_unregister+0x2c/0x40 pci_unregister_driver+0x36/0xb0 i915_exit+0x1a/0x8b [i915] SyS_delete_module+0x18c/0x1e0 entry_SYSCALL_64_fastpath+0x1c/0xb1 RIP: 0033:0x7f5df3286287 RSP: 002b:00007fff8e107cc8 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: ffffffff81493a03 RCX: 00007f5df3286287 RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564c7be02e48 RBP: ffffc90000523f88 R08: 0000000000000000 R09: 0000000000000080 R10: 00007f5df4d6e8c0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff8e107eb0 R14: 0000000000000000 R15: 0000000000000000 Or a GPF like: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178 +a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid +[last unloaded: snd_hda_intel] CPU: 0 PID: 82 Comm: kworker/0:1 Tainted: G U W 4.14.0-rc3-CI-CI_DRM_3186+ #1 Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017 Workqueue: events intel_dp_modeset_retry_work_fn [i915] task: ffff88045a5caa40 task.stack: ffffc90000378000 RIP: 0010:drm_setup_crtcs+0x143/0xbf0 RSP: 0018:ffffc9000037bd20 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000780 RDI: 00000000ffffffff RBP: ffffc9000037bdb8 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000780 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88044fbef4e8 R14: 0000000000000780 R15: 0000000000000438 FS: 0000000000000000(0000) GS:ffff88045d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ec51ee5168 CR3: 000000044c89d003 CR4: 00000000003606f0 Call Trace: drm_fb_helper_hotplug_event.part.18+0x7e/0xc0 drm_fb_helper_hotplug_event+0x1a/0x20 intel_fbdev_output_poll_changed+0x1a/0x20 [i915] drm_kms_helper_hotplug_event+0x27/0x30 intel_dp_modeset_retry_work_fn+0x77/0x80 [i915] process_one_work+0x233/0x660 worker_thread+0x206/0x3b0 kthread+0x152/0x190 ? process_one_work+0x660/0x660 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Code: 06 00 00 45 8b 45 20 31 db 45 31 e4 45 85 c0 0f 8e 91 06 00 00 44 8b 75 94 44 8b 7d 90 49 8b 45 28 49 63 d4 44 89 f6 41 83 c4 01 <48> 8b 04 d0 44 +89 fa 48 8b 38 48 8b 87 a8 01 00 00 ff 50 20 01 RIP: drm_setup_crtcs+0x143/0xbf0 RSP: ffffc9000037bd20 ---[ end trace 08901ff1a77d30c7 ]--- v2: * Rename it to intel_hpd_poll_fini() and call drm_kms_helper_fini() inside it as the first step before cancel work (Chris Wilson) * Add GPF trace in commit message and make the function static (Maarten Lankhorst) Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: |
||
|
Xiong Zhang
|
894e287b3d |
drm/i915/gvt: Adding ACTHD mmio read handler
When a workload is too heavy to finish it in gpu hang check timer intervals(1.5), gpu hang check function will check ACTHD register value to decide whether gpu is real dead or not. On real hw, ACTHD is updated by HW when workload is running, then host kernel won't think it is gpu hang. while guest kernel always read a constant ACTHD value as GVT doesn't supply ACTHD emulate handler, then guest kernel detects a fake gpu hang. To remove such guest fake gpu hang, this patch supply ACTHD mmio read handler which read real HW ACTHD register directly. Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b4c9a097-3e62-124e-6856-b0c37764df7b@intel.com |
||
|
Xiong Zhang
|
20a2bcdec5 |
drm/i915/gvt: Extract mmio_read_from_hw() common function
The mmio read handler for ring timestmap / instdone register are same as reading hw value directly. Extract it as common function to reduce code duplications. Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> |
||
|
Zhi Wang
|
edee7ecdb4 |
drm/i915/gvt: Refine MMIO_RING_F()
Inspect if the host has VCS2 ring by host i915 macro in MMIO_RING_F(). Also this helps on reducing some LOCs. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> |
||
|
Zhenyu Wang
|
8f63fc2bc6 |
drm/i915/gvt: properly check per_ctx bb valid state
Need to check valid state for per_ctx bb and bypass batch buffer combine for scan if necessary. Otherwise adding invalid MI batch buffer start cmd for per_ctx bb will cause scan failure, which is taken as -EFAULT now so vGPU would be put in failsafe. This trys to fix that by checking per_ctx bb valid state. Also remove old invalid WARNING that indirect ctx bb shouldn't depend on valid per_ctx bb. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> |
||
|
Lionel Landwerlin
|
7277f75504 |
drm/i915/perf: fix perf enable/disable ioctls with 32bits userspace
The compat callback was missing and triggered failures in 32bits userspace when enabling/disable the perf stream. We don't require any particular processing here as these ioctls don't take any argument. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: |
||
|
Jani Nikula
|
cdc1cdca2d |
drm/i915: Update DRIVER_DATE to 20171023
Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Rodrigo Vivi
|
9c3b2689d0 |
drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.
Starting on CNL we now need to map VBT DDC Pin to
BSPec DDC Pin values. Not a direct translation anymore.
According to VBT
Block 2 (General Bytes Definition)
DDC Bus
+----------+-----------+--------------------+
| DDI Type | VBT Value | Bspec Mapped Value |
+----------+-----------+--------------------+
| DDI-B | 0x1 | 0x1 |
| DDI-C | 0x2 | 0x2 |
| DDI-D | 0x3 | 0x4 |
| DDI-F | 0x4 | 0x3 |
+----------+-----------+--------------------+
v2: Move defines to a better place.
This is actually CNL_PCH not CNL only.
v3: Accepting Ville's suggestions: enums and array to
to make this future proof.
v4: Protect the array access as Ville suggested.
Also accepting all Jani's suggestions:
- use already defined gmbus pin definitions.
- use map_ddc_pin for disambiguation.
- Add /* sic */ comment on inverted values
so people can easily see it it nos a mistake
we have the map 3 -> 4 and 4 -> 3 :/
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171020172641.16029-1-rodrigo.vivi@intel.com
|
||
|
Rodrigo Vivi
|
2952cd6fb4 |
drm/i915: Let's use more enum intel_dpll_id pll_id.
No functional change expected. Just let's use this enum when possible and also same standard pll_id name so we can rework gen9+ port clock later. Cc: Mika Kahola <mika.kahola@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171018195407.8618-1-rodrigo.vivi@intel.com |
||
|
Madhav Chauhan
|
6a2f0641d3 |
drm/i915: Use existing DSI backlight ports info
This patch re-use already parsed DSI backlight/cabc ports info for saving it inside struct intel_dsi rather than parsing it at the time of DSI initialization. V2: Remove backlight and cabc variable initialization (Jani N). Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507898700-20016-2-git-send-email-madhav.chauhan@intel.com |
||
|
Madhav Chauhan
|
46e5832014 |
drm/i915: Parse DSI backlight/cabc ports.
This patch parse DSI backlight/cabc ports info from
VBT and save them inside local structure. This saved info
can be directly used while initializing DSI for different
platforms instead of parsing for each platform.
V2: Changes:
- Typo fix in commit message.
- Move up newly added port variables (Jani N)
- Remove redundant initialization (Jani N)
- Don't parse CABC ports if not supported (Jani N)
V3: Patch restructure (Suggested by Jani N)
Credits-to: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507898700-20016-1-git-send-email-madhav.chauhan@intel.com
|
||
|
Dave Airlie
|
282dc8322a |
Merge tag 'drm-intel-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Last batch of drm/i915 features for v4.15: - transparent huge pages support (Matthew) - uapi: I915_PARAM_HAS_SCHEDULER into a capability bitmask (Chris) - execlists: preemption (Chris) - scheduler: user defined priorities (Chris) - execlists optimization (Michał) - plenty of display fixes (Imre) - has_ipc fix (Rodrigo) - platform features definition refactoring (Rodrigo) - legacy cursor update fix (Maarten) - fix vblank waits for cursor updates (Maarten) - reprogram dmc firmware on resume, dmc state fix (Imre) - remove use_mmio_flip module parameter (Maarten) - wa fixes (Oscar) - huc/guc firmware refacoring (Sagar, Michal) - push encoder specific code to encoder hooks (Jani) - DP MST fixes (Dhinakaran) - eDP power sequencing fixes (Manasi) - selftest updates (Chris, Matthew) - mmu notifier cpu hotplug deadlock fix (Daniel) - more VBT parser refactoring (Jani) - max pipe refactoring (Mika Kahola) - rc6/rps refactoring and separation (Sagar) - userptr lockdep fix (Chris) - tracepoint fixes and defunct tracepoint removal (Chris) - use rcu instead of abusing stop_machine (Daniel) - plenty of other fixes all around (Everyone) * tag 'drm-intel-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-intel: (145 commits) drm/i915: Update DRIVER_DATE to 20171012 drm/i915: Simplify intel_sanitize_enable_ppgtt drm/i915/userptr: Drop struct_mutex before cleanup drm/i915/dp: limit sink rates based on rate drm/i915/dp: centralize max source rate conditions more drm/i915: Allow PCH platforms fall back to BIOS LVDS mode drm/i915: Reuse normal state readout for LVDS/DVO fixed mode drm/i915: Use rcu instead of stop_machine in set_wedged drm/i915: Introduce separate status variable for RC6 and LLC ring frequency setup drm/i915: Create generic functions to control RC6, RPS drm/i915: Create generic function to setup LLC ring frequency table drm/i915: Rename intel_enable_rc6 to intel_rc6_enabled drm/i915: Name structure in dev_priv that contains RPS/RC6 state as "gt_pm" drm/i915: Move rps.hw_lock to dev_priv and s/hw_lock/pcu_lock drm/i915: Name i915_runtime_pm structure in dev_priv as "runtime_pm" drm/i915: Separate RPS and RC6 handling for CHV drm/i915: Separate RPS and RC6 handling for VLV drm/i915: Separate RPS and RC6 handling for BDW drm/i915: Remove superfluous IS_BDW checks and non-BDW changes from gen8_enable_rps drm/i915: Separate RPS and RC6 handling for gen6+ ... |
||
|
Chris Wilson
|
8bd8181590 |
drm/i915: Skip waking the device to service pwrite
If the device is in runtime suspend, resuming takes time and reduces our powersaving. If this was for a small write into an object, that resume will take longer than any savings in using the indirect GGTT access to avoid the cpu cache. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171019063733.31620-1-chris@chris-wilson.co.uk |
||
|
Jani Nikula
|
2f26cdc0e2 |
drm/i915/crt: split compute_config hook by platforms
Only the DDI hook has some actual content. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017140313.20937-1-jani.nikula@intel.com |
||
|
Jani Nikula
|
0ae188653b |
drm/i915: remove g4x lowfreq_avail and has_pipe_cxsr
They're unused and unsupported. Leave the reduced_clock pointers in place still, should they prove useful later on. v2: go from nuking DDI lowfreq_avail to nuking it entirely (Ville) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017140234.20677-1-jani.nikula@intel.com |
||
|
Ville Syrjälä
|
d02ace8749 |
drm/i915: Drop the redundant hdmi prefix/suffix from a lot of variables
A bunch of functions are now exclusively used for HDMI, so naming the variables with hdmi prefix/suffix is redundant. Also use int rather than u32 for the translation level consistently. v2: Rebase due to hdmi_level=-1 avoidance Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171018181958.4423-1-ville.syrjala@linux.intel.com Reviewed-by: James Ausmus <james.ausmus@intel.com> |
||
|
Ville Syrjälä
|
21b39d2a3a |
drm/i915: Unify error handling for missing DDI buf trans tables
Handle missing buf trans tables, or out of bounds buf trans levels the same way everywhere. These should never be hit under normal conditions, but let's play it safe for now. v2: Avoid the hdmi_level=-1 case (James) Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171018181934.4229-1-ville.syrjala@linux.intel.com Reviewed-by: James Ausmus <james.ausmus@intel.com> |
||
|
Ville Syrjälä
|
edba48fdfc |
drm/i915: Centralize the SKL DDI A/E vs. B/C/D buf trans handling
SKL DDI B/C/D only have 9 usable buf trans registers for DP/eDP. That matches the normal DP buf trans tables, but the low vswing eDP tables have 10 entries. Thus the eDP tables can only be used safely with DDI A and E. We try to catch cases where DDI B/C/D gets used with the wrong number of entires in some parts of the code, but not everywhere. Let's move the code to deal with that deeper into intel_ddi_get_buf_trans_edp(). And for sake of symmetry do the same in intel_ddi_get_buf_trans_dp(). That would also avoid explosions in the rather unlikely case that the DP tables would get revised to 10 entries as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-9-ville.syrjala@linux.intel.com Reviewed-by: James Ausmus <james.ausmus@intel.com> |
||
|
Ville Syrjälä
|
043eaf3685 |
drm/i915: Kill off the BXT buf_trans default_index
default_index contained in the BXT buf_trans tables is actually useless. For DP we should always have a valid level selected (otherwise the link training logic would be buggy), and for HDMI we can just do what the other platforms do and pick the correct entry in intel_ddi_hdmi_level(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016145705.11780-8-ville.syrjala@linux.intel.com Reviewed-by: James Ausmus <james.ausmus@intel.com> |