Some hardware may place additional restrictions on the gamma/degamma
curves described by our LUT properties. E.g., that a gamma curve never
decreases or that the red/green/blue channels of a LUT's entries must be
equal. Let's add a helper function that drivers can use to test that a
userspace-provided LUT is valid and doesn't violate hardware
requirements.
v2:
- Combine into a single helper that just takes a bitmask of the tests
to apply. (Brian Starkey)
- Add additional check (always performed) that LUT property blob size
is always a multiple of the LUT entry size. (stolen from ARM driver)
v3:
- Drop the LUT size check again since
drm_atomic_replace_property_blob_from_id() already covers this for
us. (Alexandru Gheorghe)
v4:
- Use an enum to describe possible test values rather than #define's;
this is cleaner to provide kerneldoc for. (Daniel Vetter)
- s/DRM_COLOR_LUT_INCREASING/DRM_COLOR_LUT_NON_DECREASING/. (Ville)
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217224415.12848-1-matthew.d.roper@intel.com
Record the priority boost we giving to the preempted client or else we
may end up in a situation where the priority queue no longer matches the
request priority order and so we can end up in an infinite loop of
preempting the same pair of requests.
Fixes: e9eaf82d97 ("drm/i915: Priority boost for waiting clients")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123135155.21562-1-chris@chris-wilson.co.uk
We just got aware that there was more IDs available
at spec, so let's add them already.
Cc: James Ausmus <james.ausmus@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118055943.10252-1-rodrigo.vivi@intel.com
When reading GEN11_GT_INTR_DWx closely after enabling the interrupts
in gen11_irq_postinstall, the returned value is garbage. This can
cause other parts of the setup code (e.g. gen11_reset_one_iir) to
think that there are interrupts to be cleared when there are none.
The garbage value is only seen on the first read done after the enable,
so this looks like a posting issue. Adding a posting read after enabling
the interrupts does indeed fix the problem.
Note that the posting read has been purposely added outside of
gen11_master_intr_enable since the issue has only been observed when the
full interrupt setup is performed.
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123023227.8117-1-daniele.ceraolospurio@intel.com
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
v2: rebase
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-1-jani.nikula@intel.com
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The value of this registers will be used to test if PSR2 is doing
selective update and if the number of blocks match with the expected.
v2:
- Using new macros
- Changed the string output
v3:
- reading PSR2_SU_STATUS registers together(Dhinakaran)
- printing SU blocks of frames with 0 updates(Dhinakaran)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-4-jose.souza@intel.com
This register contains how many blocks was sent in the past selective
updates.
Those registers are not kept set all the times but polling it after flip
can show the values corresponding to the last 8 frames.
v2: Improved macros(Dhinakaran)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-3-jose.souza@intel.com
The old debugfs fields was not following a naming partern and it was
a bit confusing.
So it went from:
~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status
Sink_Support: yes
PSR mode: PSR1
Enabled: yes
Busy frontbuffer bits: 0x000
Main link in standby mode: no
HW Enabled & Active bit: yes
Source PSR status: 0x24050006 [SRDONACK]
To:
~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status
Sink support: yes [0x03]
PSR mode: PSR1 enabled
Source PSR ctl: enabled [0x81f00e26]
Source PSR status: IDLE [0x04010006]
Busy frontbuffer bits: 0x00000000
The 'Main link in standby mode' was removed as it is not useful but
if needed by someone the information is still in the register value
of 'Source PSR ctl' inside of the brackets, PSR mode and Enabled was
squashed into PSR mode, some renames and reorders and we have this
cleaner version. This will also make easy to parse debugfs for IGT
tests.
v2: Printing sink PSR version with only 2 hex digits as it is a byte
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Suggested-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-2-jose.souza@intel.com
For now PSR2 is still disabled by default for all platforms but is
our intention to let debugfs to enable it for debug and tests
proporses, so intel_psr2_enabled() that is also used by debugfs to
decide if PSR2 is going to be enabled needs to take in consideration
the debug field.
v2: Using the switch/case that intel_psr2_enabled() already had to
handle this(DK)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-1-jose.souza@intel.com
Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable()
to innolux_panel_unprepare(), so they are consistent with
innolux_panel_enable() and innolux_panel_prepare().
This also fixes some mode check and irq timeout issue in MTK dsi code.
Since some dsi code (e.g. mtk_dsi) have following call trace:
1. drm_panel_disable(), which calls innolux_panel_disable()
2. switch to cmd mode
3. drm_panel_unprepare(), which calls innolux_panel_unprepare()
However, mtk_dsi needs to be in cmd mode to be able to send commands
(e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()),
so we need these functions to be called after the switch to cmd mode happens,
i.e. in innolux_panel_unprepare.
Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.org
Consult the I2C_M_STOP flag to determine whether to set the MOT bit or
not. Makes it possible to send multiple messages in one go with
stop+start generated between the messages (as opposed nothing or
repstart depending on whether thr address/rw changed).
Not sure anyone has actual use for this but figured I'd handle it
since I started to look at that flag for MST remote i2c xfers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-3-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Prior to adding a third instance of intel_context_init() and extending
the information stored therewithin, refactor out the common assignments.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-8-chris@chris-wilson.co.uk
Before adding yet another copy of struct live_test and its handler,
refactor the existing code into a common framework for live selftests.
For many live selftests, we want to know if the GPU hung or otherwise
misbehaved during the execution of the test (beyond any infraction in
the behaviour under test), live_test provides this by comparing the
GPU state before and after, alerting if it unexpectedly changed (e.g.
the reset counter changed). It also ensures that the GPU is idle before
and after the test, so that residual code running on the GPU is flushed
before testing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-5-chris@chris-wilson.co.uk
Some tests (e.g. igt_vma_pin1) presume that we have a completely clean
GGTT so that it can probe boundaries without fear that something is
already allocated there. However, the mock device is starting to get
complicated and following similar rules to the live device, i.e. we
can't guarantee that i915->ggtt remains clean, so create a temporary
address_space equivalent to the mock ggtt for the purpose.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-7-chris@chris-wilson.co.uk
During review of commit 71fc448c1a ("drm/i915/selftests: Make evict
tolerant of foreign objects"), Matthew mentioned it would be better if
we explicitly tracked the objects we created. We have an obj->st_link
hook for this purpose, so add the corresponding list of objects and
reduce our loops to only consider our own list.
References: 71fc448c1a ("drm/i915/selftests: Make evict tolerant of foreign objects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-6-chris@chris-wilson.co.uk
The display engine has 2 dithering enable bits which both need to be set
for dithering to happen, 1 in the PIPECONF register which is taken care of
by i9xx_set_pipeconf() and a second bit at the encoder level.
The dsi code was not setting the encoder level dithering enable bit causing
dithering to be disabled, this commit fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-2-hdegoede@redhat.com
There are 3 problems with the dsi code's pipe_bpp handling for 6 bpc
pixel-formats which this commit addresses:
1) It assumes that the pipe_bpp is the same as the bpp going over the dsi
lanes. This assumption is not valid for MIPI_DSI_FMT_RGB666, where pipe_bpp
should be 18 so that we do proper dithering but we actually send 24 bpp
over the dsi lanes (MIPI_DSI_FMT_RGB666_PACKED sends 18 bpp).
This assumption is enforced by an assert in *_dsi_get_pclk(). This assert
triggers on the initial hw-state readback on BYT/CHT devices which use
MIPI_DSI_FMT_RGB666, such as the Prowise PT301 tablet. PIPECONF is set to
6BPC / 18 bpp by the GOP, while mipi_dsi_pixel_format_to_bpp() returns 24.
This commits switches the calculations in *_dsi_get_pclk() to use the bpp
from mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format) which
returns the bpp going over the mipi lanes and drops the assert.
2) On BXT bxt_dsi_get_pipe_config() wrongly overrides the pipe_bpp which
i9xx_get_pipe_config() reads from PIPECONF with the return value from
mipi_dsi_pixel_format_to_bpp(). This avoids the assert from 1. but is wrong
since the pipe is actually running at the value configured in PIPECONF.
This commit drops the override of pipe_bpp from bxt_dsi_get_pipe_config().
3) The dsi encoder's compute_config() never assigns a value to pipe_bpp,
unlike most other encoders. Falling back on compute_baseline_pipe_bpp()
which always picks 24. 24 is only correct for MIPI_DSI_FMT_RGB88 for the
others we should use 18 bpp so that we correctly do 6bpc color dithering.
This commit adds code to intel_dsi_compute_config() to properly set
pipe_bpp based on intel_dsi->pixel_format.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-1-hdegoede@redhat.com
Reversed logic when writing the original comment, now fixed.
Fixes: e9eafcb589 ("drm: move drm_can_sleep() to drm_util.h")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190120171217.12508-1-sam@ravnborg.org
We are not allowed to assign rq->global_seqno=0 as it has a special
meaning of "inactive" (not executing on HW).
Fixes: 6faf5916e6 ("drm/i915: Remove HW semaphores for gen7 inter-engine synchronisation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190119143024.26971-1-chris@chris-wilson.co.uk
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Minor checkpatch fixes sprinkled on top of the changed lines.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-8-jani.nikula@intel.com
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-7-jani.nikula@intel.com
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-6-jani.nikula@intel.com
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Minor checkpatch/whitepace fixes sprinkled on top of the changed lines.
v2: more whitespace fixes (Ville, José)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-5-jani.nikula@intel.com
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-4-jani.nikula@intel.com
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Minor checkpatch fixes sprinkled on top of the changed lines.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-3-jani.nikula@intel.com
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-2-jani.nikula@intel.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/stm/ltdc.c: In function 'ltdc_plane_atomic_check':
drivers/gpu/drm/stm/ltdc.c:694:13: warning:
variable 'src_y' set but not used [-Wunused-but-set-variable]
u32 src_x, src_y, src_w, src_h;
^
^
drivers/gpu/drm/stm/ltdc.c:694:6: warning:
variable 'src_x' set but not used [-Wunused-but-set-variable]
u32 src_x, src_y, src_w, src_h;
^
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538131180-34108-1-git-send-email-yuehaibing@huawei.com
This adds the appropriate device-tree compatible for hooking frontend
support for the A20. Since the hardware is very similar to the A10, it
shares the same quirks (which were already introduced).
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-24-paul.kocialkowski@bootlin.com
This adds the appropriate device-tree compatible and quirk data for
hooking frontend support for the A20. It supports the FIR coefficients
ready bit but not the access control bit. It also takes different phase
values than the A33 for these coefficients.
The compatible is already used in the A10 device-tree and already
documented in the device-tree bindings.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-23-paul.kocialkowski@bootlin.com
The COEF_RDY bit is used to tell the hardware that new FIR filters
coefficients have been written to the registers and that the hardware
should take them into account starting next frame.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-20-paul.kocialkowski@bootlin.com
The ACCESS_CTRL bit is not found on all the variants of the frontend, so
let's introduce a structure that will hold whether or not we need to set
it, and associate it with the compatible.
This will be extended for further similar quirks later on.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-19-paul.kocialkowski@bootlin.com
Unlike what is currently being done, the ACCESS_CTRL bit documentation asks
that this bit should be set before modifying any register. The code in the
BSP also does this, so make sure we do this as well.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-18-paul.kocialkowski@bootlin.com
This introduces a list of supported modifiers for the driver, that
includes the Allwinner tiled modifier, as well as a format_mod_supported
callback.
The callback uses both the backend and frontend helpers to indicate
per-format modifier support (including for the linear modifier).
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-16-paul.kocialkowski@bootlin.com
This introduces a helper to check whether a frontend input format
supports tiling mode. This helper is used when tiling is requested in
the frontend format support helper.
Only semiplanar and planar YUV formats are supported by the hardware.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-15-paul.kocialkowski@bootlin.com
This introduces stride and offset configuration for the VPU tiling mode.
Stride is calculated differently than it is for linear formats and an
offset is calculated, for which new register definitions are introduced.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-14-paul.kocialkowski@bootlin.com
This introduces the data input mode definitions for the tiled YUV mode,
that are used in the input mode helper if tiling is requested.
The modifier is passed to the helper from the framebuffer to determine
if tiling is requested.
Only semiplanar and planar YUV formats are supported for tiling mode.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-13-paul.kocialkowski@bootlin.com
This introduces specific definitions for vendor Allwinner and its
associated tiled format modifier. This modifier is used for the output
format of the VPU, that can be imported directly with the display
engine hardware supported by the sun4i-drm driver.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-12-paul.kocialkowski@bootlin.com
Planar YUV formats come with 3 distinct planes, which requires
configuring the frontend line stride and address registers for the
third plane.
Our hardware only supports the YUV planes order and in order to support
formats with a YVU plane order, a helper is introduced to indicate
whether to invert the address of the two chroma planes.
Missing definitions for YUV411 and YUV444 input format configuration are
also introduced as support is added for these formats. For the input
sequence part, no configuration is required for planar YUV formats so
zero is returned in that case.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-11-paul.kocialkowski@bootlin.com
Semi-planar YUV formats use two distinct planes, one for luminance and
one for chrominance. To add support for them, we need to configure the
second line stride and buffer address registers to setup the second YUV
plane.
New definitions are introduced to configure the input format register
for the YUV420 and YUV422 semi-planar formats.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-10-paul.kocialkowski@bootlin.com
This introduces support for packed YUV formats with 4:2:2 sampling using
the frontend. Definitions are introduced for the data format and pixel
sequence input format register values.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-9-paul.kocialkowski@bootlin.com
