Implement a CPU power management callback for restoring trap related CPU
configuration after CPU power up from a low power state. The following
state is restored:
- Status register
- HWREna register
- Exception vector configuration registers
- Context/XContext register
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
When a breakpoint or trap happens when operating in kernel mode but
on users behalf (eg syscall) it is necessary to change the address
limit to KERNEL_DS so any address checking can be bypassed and print
the correct stack trace.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Add a CPU_P5600 case to various switch statements, doing the same thing
as for CPU_PROAPTIV.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6408/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch adds a simple handler for MSA FP exceptions which delivers a
SIGFPE to the running task. In the future it should probably be extended
to re-execute the instruction with the MSACSR.NX bit set in order to
generate results for any elements which did not cause an exception
before delivering the SIGFPE signal.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6432/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch adds support for context switching the MSA vector registers.
These 128 bit vector registers are aliased with the FP registers - an
FP register accesses the least significant bits of the vector register
with which it is aliased (ie. the register with the same index). Due to
both this & the requirement that the scalar FPU must be 64-bit (FR=1) if
enabled at the same time as MSA the kernel will enable MSA & scalar FP
at the same time for tasks which use MSA. If we restore the MSA vector
context then we might as well enable the scalar FPU since the reason it
was left disabled was to allow for lazy FP context restoring - but we
just restored the FP context as it's a subset of the vector context. If
we restore the FP context and have previously used MSA then we have to
restore the whole vector context anyway (see comment in
enable_restore_fp_context for details) so similarly we might as well
enable MSA.
Thus if a task does not use MSA then it will continue to behave as
without this patch - the scalar FP context will be saved & restored as
usual. But if a task executes an MSA instruction then it will save &
restore the vector context forever more.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6431/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The 1074K is a multiprocessing coherent processing system (CPS) based
on modified 74K cores. This patch makes the 1074K an actual unique
CPU type, instead of a 74K derivative, which it is not.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Reviewed-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6389/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The interAptiv is a power-efficient multi-core microprocessor
for use in system-on-chip (SoC) applications. The interAptiv combines
a multi-threading pipeline with a coherence manager to deliver improved
computational throughput and power efficiency. The interAptiv can
contain one to four MIPS32R3 interAptiv cores, system level
coherence manager with L2 cache, optional coherent I/O port,
and optional floating point unit.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6163/
The Fixed Page Size TLB (FTLB) is a set-associative dual entry TLB. Its
purpose is to reduce the number of TLB misses by increasing the effective
TLB size and keep the implementation complexity to minimum levels.
A supported core can have both VTLB and FTLB.
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6139/
The proAptiv Multiprocessing System is a power efficient multi-core
microprocessor for use in system-on-chip (SoC) applications.
The proAptiv Multiprocessing System combines a deep pipeline
with multi-issue out of order execution for improved computational
throughput. The proAptiv Multiprocessing System can contain one to
six MIPS32r3 proAptiv cores, system level coherence
manager with L2 cache, optional coherent I/O port, and optional
floating point unit.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6134/
The cacheer register is always implemented in the same way in the
MIPS32r2 Imgtec cores so print the ES bit when an cache error
occurs.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6041/
CPUs implementing MIPS32 R2 may include a 64-bit FPU, just as MIPS64 CPUs
do. In order to preserve backwards compatibility a 64-bit FPU will act
like a 32-bit FPU (by accessing doubles from the least significant 32
bits of an even-odd pair of FP registers) when the Status.FR bit is
zero, again just like a mips64 CPU. The standard O32 ABI is defined
expecting a 32-bit FPU, however recent toolchains support use of a
64-bit FPU from an O32 MIPS32 executable. When an ELF executable is
built to use a 64-bit FPU a new flag (EF_MIPS_FP64) is set in the ELF
header.
With this patch the kernel will check the EF_MIPS_FP64 flag when
executing an O32 binary, and set Status.FR accordingly. The addition
of O32 64-bit FP support lessens the opportunity for optimisation in
the FPU emulator, so a CONFIG_MIPS_O32_FP64_SUPPORT Kconfig option is
introduced to allow this support to be disabled for those that don't
require it.
Inspired by an earlier patch by Leonid Yegoshin, but implemented more
cleanly & correctly.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/6154/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
An NMI exception delivered from YAMON delivers the PC in ErrorPC
instead of EPC. It's also necessary to clear the Status.BEV
bit for the page fault exception handler to work properly.
[ralf@linux-mips: Let the assembler do the loading of the mask value rather
than the convoluted explicit %hi/%lo manual relocation sequence from the
original patch.]
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6035/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/6084/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Checking for n<0 && n>9 makes no sense because it can never
be true. Moreover, we can have up to 64 vectored interrupts
so BUG_ON(n>9) was wrong anyway.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5909/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
o Move current_cpu_type() to a separate header file
o #ifdefing on supported CPU types lets modern GCC know that certain
code in callers may be discarded ideally turning current_cpu_type() into
a function returning a constant.
o Use current_cpu_type() rather than direct access to struct cpuinfo_mips.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5833/
Pull MIPS fixes from Ralf Baechle:
"MIPS fixes for 3.11. Half of then is for Netlogic the remainder
touches things across arch/mips.
Nothing really dramatic and by rc1 standards MIPS will be in fairly
good shape with this applied. Tested by building all MIPS defconfigs
of which with this pull request four platforms won't build. And yes,
it boots also on my favorite test systems"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION
MIPS: Octeon: Fix DT pruning bug with pip ports
MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMP
MIPS: tlbex: fix broken build in v3.11-rc1
MIPS: Netlogic: Add XLP PIC irqdomain
MIPS: Netlogic: Fix USB block's coherent DMA mask
MIPS: tlbex: Fix typo in r3000 tlb store handler
MIPS: BMIPS: Fix thinko to release slave TP from reset
MIPS: Delete dead invocation of exception_exit().
panic() doesn't return so this call was useless.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Alexander Sverdlin <alexander.sverdlin@nsn.com>
commit 3747069b25e419f6b51395f48127e9812abc3596 upstream.
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
and are flagged as __cpuinit -- so if we remove the __cpuinit from
the arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
related content into no-ops as early as possible, since that will get
rid of these warnings. In any case, they are temporary and harmless.
Here, we remove all the MIPS __cpuinit from C code and __CPUINIT
from asm files. MIPS is interesting in this respect, because there
are also uasm users hiding behind their own renamed versions of the
__cpuinit macros.
[1] https://lkml.org/lkml/2013/5/20/589
[ralf@linux-mips.org: Folded in Paul's followup fix.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5494/
Patchwork: https://patchwork.linux-mips.org/patch/5495/
Patchwork: https://patchwork.linux-mips.org/patch/5509/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The ISA exception bit selects whether exceptions are taken in classic
or microMIPS mode. This bit is Config3.ISAOnExc and was improperly
defined as bits 16 and 17 instead of just bit 16. A new function was
added so that platforms could set this bit when running a kernel
compiled with only microMIPS instructions.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5377/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS I is the ancestor of all MIPS ISA and architecture variants. Anything
ever build in the MIPS empire is either MIPS I or at least contains MIPS I.
If it's running Linux, that is.
So there is little point in having cpu_has_mips_1 because it will always
evaluate as true - though usually only at runtime. Thus there is no
point in having the MIPS_CPU_ISA_I ISA flag, so get rid of it.
Little complication: traps.c was using a test for a pure MIPS I ISA as
a test for an R3000-style cp0. To deal with that, use a check for
cpu_has_3kex or cpu_has_4kex instead.
cpu_has_3kex is a new macro. At the moment its default implementation is
!cpu_has_4kex but this may eventually change if Linux is ever going to
support the oddball MIPS processors R6000 and R8000 so users of either
of these macros should not make any assumptions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5551/
When having enabled MIPS_PGD_C0_CONTEXT, trap_init() might call the
generated tlbmiss_handler_setup_pgd before it was committed to memory,
causing boot failures:
trap_init()
|- per_cpu_trap_init()
| |- TLBMISS_HANDLER_SETUP()
| |- tlbmiss_handler_setup_pgd()
|- flush_tlb_handlers()
To avoid this, move flush_tlb_handlers() into build_tlb_refill_handler()
right after they were generated. We can do this as the cache handling is
initialized just before creating the tlb handlers.
This issue was introduced in 3d8bfdd030
("MIPS: Use C0_KScratch (if present) to hold PGD pointer.").
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5539/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Kernel threads should be able to use COP2 if the platform needs it.
Do not call die_if_kernel() for a coprocessor unusable exception if
the exception due to COP2 usage. Instead, the default notifier for
COP2 exceptions is updated to call die_if_kernel.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Cc: ddaney.cavm@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5415/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2a0b24f56c broke Trap exception handling in
the standard MIPS mode. Additionally the microMIPS-mode trap code mask is
wrong, as it's a 4-bit field. Here's a fix.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5309/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This reverts commit d532f3d267.
The original commit has several problems:
1) Doesn't work with 64-bit kernels.
2) Calls TLBMISS_HANDLER_SETUP() before the code is generated.
3) Calls TLBMISS_HANDLER_SETUP() twice in per_cpu_trap_init() when
only one call is needed.
[ralf@linux-mips.org: Also revert the bits of the ASID patch which were
hidden in the KVM merge.]
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: "Steven J. Hill" <Steven.Hill@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5242/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull MIPS updates from Ralf Baechle:
- More work on DT support for various platforms
- Various fixes that were to late to make it straight into 3.9
- Improved platform support, in particular the Netlogic XLR and
BCM63xx, and the SEAD3 and Malta eval boards.
- Support for several Ralink SOC families.
- Complete support for the microMIPS ASE which basically reencodes the
existing MIPS32/MIPS64 ISA to use non-constant size instructions.
- Some fallout from LTO work which remove old cruft and will generally
make the MIPS kernel easier to maintain and resistant to compiler
optimization, even in absence of LTO.
- KVM support. While MIPS has announced hardware virtualization
extensions this KVM extension uses trap and emulate mode for
virtualization of MIPS32. More KVM work to add support for VZ
hardware virtualizaiton extensions and MIPS64 will probably already
be merged for 3.11.
Most of this has been sitting in -next for a long time. All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.
Semantic conflict with kvm updates done as per Ralf
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
MIPS: Add new GIC clockevent driver.
MIPS: Formatting clean-ups for clocksources.
MIPS: Refactor GIC clocksource code.
MIPS: Move 'gic_frequency' to common location.
MIPS: Move 'gic_present' to common location.
MIPS: MIPS16e: Add unaligned access support.
MIPS: MIPS16e: Support handling of delay slots.
MIPS: MIPS16e: Add instruction formats.
MIPS: microMIPS: Optimise 'strnlen' core library function.
MIPS: microMIPS: Optimise 'strlen' core library function.
MIPS: microMIPS: Optimise 'strncpy' core library function.
MIPS: microMIPS: Optimise 'memset' core library function.
MIPS: microMIPS: Add configuration option for microMIPS kernel.
MIPS: microMIPS: Disable LL/SC and fix linker bug.
MIPS: microMIPS: Add vdso support.
MIPS: microMIPS: Add unaligned access support.
MIPS: microMIPS: Support handling of delay slots.
MIPS: microMIPS: Add support for exception handling.
MIPS: microMIPS: Floating point support.
MIPS: microMIPS: Fix macro naming in micro-assembler.
...
All exceptions must be taken in microMIPS mode, never in classic
MIPS mode or the kernel falls apart. A few NOP instructions are
used to maintain the correct alignment of microMIPS versions of
the exception vectors.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Add logic needed to do floating point emulation in microMIPS mode.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Steven J. Hill <Steven. Hill@imgtec.com>
Original patch by Ralf Baechle and removed by Harold Koerfgen
with commit f67e4ffc79905482c3b9b8c8dd65197bac7eb508. This
allows for more generic kernels since the size of the ASID
and corresponding masks can be determined at run-time. This
patch is also required for the new Aptiv cores and has been
tested on Malta and Malta Aptiv platforms.
[ralf@linux-mips.org: Added relevant part of fix
https://patchwork.linux-mips.org/patch/5213/]
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms. This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.
show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.
* Archs which didn't print debug info now do.
alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
um, xtensa
* Already prints debug info. Replaced with show_regs_print_info().
The printed information is superset of what used to be there.
arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86
* s390 is special in that it used to print arch-specific information
along with generic debug info. Heiko and Martin think that the
arch-specific extra isn't worth keeping s390 specfic implementation.
Converted to use the generic version.
Note that now all archs print the debug info before actual register
dumps.
An example BUG() dump follows.
kernel BUG at /work/os/work/kernel/workqueue.c:4841!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
Hardware name: empty empty/S3992, BIOS 080011 10/26/2007
task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6
RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246
RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
Call Trace:
[<ffffffff81000312>] do_one_initcall+0x122/0x170
[<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8
[<ffffffff81c47760>] ? rest_init+0x140/0x140
[<ffffffff81c4776e>] kernel_init+0xe/0xf0
[<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0
[<ffffffff81c47760>] ? rest_init+0x140/0x140
...
v2: Typo fix in x86-32.
v3: CPU number dropped from show_regs_print_info() as
dump_stack_print_info() has been updated to print it. s390
specific implementation dropped as requested by s390 maintainers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile bits]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both dump_stack() and show_stack() are currently implemented by each
architecture. show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack(). On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.
The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().
There's no reason to require archs to implement two separate but mostly
identical functions. It leads to unnecessary subtle information.
This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin. Blackfin's
dump_stack() does something wonky that I don't understand.
Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information. This is used
in blackfin.
This patch brings the following behavior changes.
* On some archs, an extra level in backtrace for show_stack() could be
printed. This is because the top frame was determined in
dump_stack() on those archs while generic dump_stack() can't do that
reliably. It can be compensated by inlining dump_stack() but not
sure whether that'd be necessary.
* Most archs didn't use to print debug info on dump_stack(). They do
now.
An example WARN dump follows.
WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
Hardware name: empty
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
Call Trace:
[<ffffffff81c614dc>] dump_stack+0x19/0x1b
[<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20
[<ffffffff8234a071>] init_workqueues+0x35/0x505
...
v2: CPU number added to the generic debug info as requested by s390
folks and dropped the s390 specific dump_stack(). This loses %ksp
from the debug message which the maintainers think isn't important
enough to keep the s390-specific dump_stack() implementation.
dump_stack_print_info() is moved to kernel/printk.c from
lib/dump_stack.c. Because linkage is per objecct file,
dump_stack_print_info() living in the same lib file as generic
dump_stack() means that archs which implement custom dump_stack()
- at this point, only blackfin - can't use dump_stack_print_info()
as that will bring in the generic version of dump_stack() too. v1
The v1 patch broke build on blackfin due to this issue. The build
breakage was reported by Fengguang Wu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Without this, it's possible that LTO will discard the calls to
set_except_vector() in the probe for the DADDI overflow bug resulting in a
kernel crash like this:
[...]
Mount-cache hash table entries: 256
Checking for the daddi bug... Integer overflow[#1]:
Cpu 0
$ 0 : 0000000000000000 0000000010008ce1 0000000000000001 0000000000000000
$ 4 : 7fffffffffffedcd ffffffff81410000 0000000000000030 000000000000003f
[...]
There are other similar places in the kernel so we've just been lucky
that GCC's been tolerant.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The code was written as it is because it's more expressive, a bit easier.
But it's always been dirty, if not a bug. But we can't cheat with LTO
compilers, so this results in:
[...]
LDFINAL vmlinux.o
In file included from arch/mips/kernel/topology.c:604:0,
from arch/mips/kernel/time.c:212,
from arch/mips/kernel/syscall.c:300,
from arch/mips/kernel/signal.c:853,
from arch/mips/kernel/setup.c:1030,
from arch/mips/kernel/reset.c:354,
from arch/mips/kernel/ptrace.c:562,
from arch/mips/kernel/process.c:770,
from arch/mips/kernel/irq.c:350,
from arch/mips/kernel/branch.c:321,
from arch/mips/kernel/cpu-probe.c:1370,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345,
from arch/mips/sgi-ip22/ip22-gio.c:660,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219,
from arch/mips/sgi-ip22/ip22-reset.c:224,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116,
from arch/mips/sgi-ip22/ip22-nvram.c:334,
from include/linux/kernel_stat.h:79,
from arch/mips/sgi-ip22/ip22-int.c:592,
from arch/mips/sgi-ip22/ip22-hpc.c:470,
from arch/mips/sgi-ip22/ip22-mc.c:135,
from init/init_task.c:54,
from init/calibrate.c:744,
from init/noinitramfs.c:62,
from init/do_mounts.c:573,
from init/version.c:1009,
from init/main.c:777,
from :729:
arch/mips/kernel/traps.c:63:49: error: variable ‘handle_tlbl’ redeclared as function
In file included from arch/mips/mm/page.c:310:0,
from arch/mips/mm/mmap.c:208,
from arch/mips/mm/init.c:641,
from arch/mips/mm/gup.c:811,
from arch/mips/mm/fault.c:659,
from include/linux/module.h:682,
from arch/mips/mm/dma-default.c:161,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:397,
from arch/mips/kernel/i8253.c:538,
from arch/mips/kernel/proc.c:145,
from arch/mips/kernel/irq_cpu.c:129,
from arch/mips/kernel/i8259.c:229,
from include/uapi/linux/elf.h:251,
from arch/mips/kernel/mips_ksyms.c:129,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/time.h:50,
from arch/mips/kernel/cevt-r4k.c:90,
from arch/mips/kernel/vdso.c:136,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:351,
from arch/mips/kernel/unaligned.c:809,
from arch/mips/kernel/traps.c:1720,
from arch/mips/kernel/topology.c:684,
from arch/mips/kernel/time.c:212,
from arch/mips/kernel/syscall.c:300,
from arch/mips/kernel/signal.c:853,
from arch/mips/kernel/setup.c:1030,
from arch/mips/kernel/reset.c:354,
from arch/mips/kernel/ptrace.c:562,
from arch/mips/kernel/process.c:770,
from arch/mips/kernel/irq.c:350,
from arch/mips/kernel/branch.c:321,
from arch/mips/kernel/cpu-probe.c:1370,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345,
from arch/mips/sgi-ip22/ip22-gio.c:660,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219,
from arch/mips/sgi-ip22/ip22-reset.c:224,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116,
from arch/mips/sgi-ip22/ip22-nvram.c:334,
from include/linux/kernel_stat.h:79,
from arch/mips/sgi-ip22/ip22-int.c:592,
from arch/mips/sgi-ip22/ip22-hpc.c:470,
from arch/mips/sgi-ip22/ip22-mc.c:135,
from init/init_task.c:54,
from init/calibrate.c:744,
from init/noinitramfs.c:62,
from init/do_mounts.c:573,
from init/version.c:1009,
from init/main.c:777,
from :729:
arch/mips/mm/tlbex.c:1448:5: note: previously declared here
In file included from arch/mips/kernel/topology.c:604:0,
from arch/mips/kernel/time.c:212,
from arch/mips/kernel/syscall.c:300,
from arch/mips/kernel/signal.c:853,
from arch/mips/kernel/setup.c:1030,
from arch/mips/kernel/reset.c:354,
from arch/mips/kernel/ptrace.c:562,
from arch/mips/kernel/process.c:770,
from arch/mips/kernel/irq.c:350,
from arch/mips/kernel/branch.c:321,
from arch/mips/kernel/cpu-probe.c:1370,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345,
from arch/mips/sgi-ip22/ip22-gio.c:660,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219,
from arch/mips/sgi-ip22/ip22-reset.c:224,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116,
from arch/mips/sgi-ip22/ip22-nvram.c:334,
from include/linux/kernel_stat.h:79,
from arch/mips/sgi-ip22/ip22-int.c:592,
from arch/mips/sgi-ip22/ip22-hpc.c:470,
from arch/mips/sgi-ip22/ip22-mc.c:135,
from init/init_task.c:54,
from init/calibrate.c:744,
from init/noinitramfs.c:62,
from init/do_mounts.c:573,
from init/version.c:1009,
from init/main.c:777,
from :729:
arch/mips/kernel/traps.c:62:49: error: variable ‘handle_tlbm’ redeclared as function
In file included from arch/mips/mm/page.c:310:0,
from arch/mips/mm/mmap.c:208,
from arch/mips/mm/init.c:641,
from arch/mips/mm/gup.c:811,
from arch/mips/mm/fault.c:659,
from include/linux/module.h:682,
from arch/mips/mm/dma-default.c:161,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:397,
from arch/mips/kernel/i8253.c:538,
from arch/mips/kernel/proc.c:145,
from arch/mips/kernel/irq_cpu.c:129,
from arch/mips/kernel/i8259.c:229,
from include/uapi/linux/elf.h:251,
from arch/mips/kernel/mips_ksyms.c:129,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/time.h:50,
from arch/mips/kernel/cevt-r4k.c:90,
from arch/mips/kernel/vdso.c:136,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:351,
from arch/mips/kernel/unaligned.c:809,
from arch/mips/kernel/traps.c:1720,
from arch/mips/kernel/topology.c:684,
from arch/mips/kernel/time.c:212,
from arch/mips/kernel/syscall.c:300,
from arch/mips/kernel/signal.c:853,
from arch/mips/kernel/setup.c:1030,
from arch/mips/kernel/reset.c:354,
from arch/mips/kernel/ptrace.c:562,
from arch/mips/kernel/process.c:770,
from arch/mips/kernel/irq.c:350,
from arch/mips/kernel/branch.c:321,
from arch/mips/kernel/cpu-probe.c:1370,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345,
from arch/mips/sgi-ip22/ip22-gio.c:660,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219,
from arch/mips/sgi-ip22/ip22-reset.c:224,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116,
from arch/mips/sgi-ip22/ip22-nvram.c:334,
from include/linux/kernel_stat.h:79,
from arch/mips/sgi-ip22/ip22-int.c:592,
from arch/mips/sgi-ip22/ip22-hpc.c:470,
from arch/mips/sgi-ip22/ip22-mc.c:135,
from init/init_task.c:54,
from init/calibrate.c:744,
from init/noinitramfs.c:62,
from init/do_mounts.c:573,
from init/version.c:1009,
from init/main.c:777,
from :729:
arch/mips/mm/tlbex.c:1450:5: note: previously declared here
In file included from arch/mips/kernel/topology.c:604:0,
from arch/mips/kernel/time.c:212,
from arch/mips/kernel/syscall.c:300,
from arch/mips/kernel/signal.c:853,
from arch/mips/kernel/setup.c:1030,
from arch/mips/kernel/reset.c:354,
from arch/mips/kernel/ptrace.c:562,
from arch/mips/kernel/process.c:770,
from arch/mips/kernel/irq.c:350,
from arch/mips/kernel/branch.c:321,
from arch/mips/kernel/cpu-probe.c:1370,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345,
from arch/mips/sgi-ip22/ip22-gio.c:660,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219,
from arch/mips/sgi-ip22/ip22-reset.c:224,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116,
from arch/mips/sgi-ip22/ip22-nvram.c:334,
from include/linux/kernel_stat.h:79,
from arch/mips/sgi-ip22/ip22-int.c:592,
from arch/mips/sgi-ip22/ip22-hpc.c:470,
from arch/mips/sgi-ip22/ip22-mc.c:135,
from init/init_task.c:54,
from init/calibrate.c:744,
from init/noinitramfs.c:62,
from init/do_mounts.c:573,
from init/version.c:1009,
from init/main.c:777,
from :729:
arch/mips/kernel/traps.c:64:49: error: variable ‘handle_tlbs’ redeclared as function
In file included from arch/mips/mm/page.c:310:0,
from arch/mips/mm/mmap.c:208,
from arch/mips/mm/init.c:641,
from arch/mips/mm/gup.c:811,
from arch/mips/mm/fault.c:659,
from include/linux/module.h:682,
from arch/mips/mm/dma-default.c:161,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:397,
from arch/mips/kernel/i8253.c:538,
from arch/mips/kernel/proc.c:145,
from arch/mips/kernel/irq_cpu.c:129,
from arch/mips/kernel/i8259.c:229,
from include/uapi/linux/elf.h:251,
from arch/mips/kernel/mips_ksyms.c:129,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/time.h:50,
from arch/mips/kernel/cevt-r4k.c:90,
from arch/mips/kernel/vdso.c:136,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:351,
from arch/mips/kernel/unaligned.c:809,
from arch/mips/kernel/traps.c:1720,
from arch/mips/kernel/topology.c:684,
from arch/mips/kernel/time.c:212,
from arch/mips/kernel/syscall.c:300,
from arch/mips/kernel/signal.c:853,
from arch/mips/kernel/setup.c:1030,
from arch/mips/kernel/reset.c:354,
from arch/mips/kernel/ptrace.c:562,
from arch/mips/kernel/process.c:770,
from arch/mips/kernel/irq.c:350,
from arch/mips/kernel/branch.c:321,
from arch/mips/kernel/cpu-probe.c:1370,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345,
from arch/mips/sgi-ip22/ip22-gio.c:660,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219,
from arch/mips/sgi-ip22/ip22-reset.c:224,
from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116,
from arch/mips/sgi-ip22/ip22-nvram.c:334,
from include/linux/kernel_stat.h:79,
from arch/mips/sgi-ip22/ip22-int.c:592,
from arch/mips/sgi-ip22/ip22-hpc.c:470,
from arch/mips/sgi-ip22/ip22-mc.c:135,
from init/init_task.c:54,
from init/calibrate.c:744,
from init/noinitramfs.c:62,
from init/do_mounts.c:573,
from init/version.c:1009,
from init/main.c:777,
from :729:
arch/mips/mm/tlbex.c:1449:5: note: previously declared here
lto1: fatal error: errors during merging of translation units
compilation terminated.
lto-wrapper: /usr/bin/mips-linux-gcc returned 1 exit status
/usr/lib64/gcc/mips-linux/4.7.1/../../../../mips-linux/bin/ld: lto-wrapper failed
collect2: error: ld returned 1 exit status
make: *** [vmlinux] Error 1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The commit a96102be70 introduced set_isa() where compatible ISA info is
also set aside from the one gets passed in. It means, for example, 1004K
will have MIPS_CPU_ISA_M32R2/M32R1/II/I flags. This leads to things like
the following inappropriate:
if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
c->isa_level == MIPS_CPU_ISA_M32R2 ||
c->isa_level == MIPS_CPU_ISA_M64R1 ||
c->isa_level == MIPS_CPU_ISA_M64R2)
This patch fixes it.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull MIPS updates from Ralf Baechle:
o Add basic support for the Mediatek/Ralink Wireless SoC family.
o The Qualcomm Atheros platform is extended by support for the new
QCA955X SoC series as well as a bunch of patches that get the code
ready for OF support.
o Lantiq and BCM47XX platform have a few improvements and bug fixes.
o MIPS has sent a few patches that get the kernel ready for the
upcoming microMIPS support.
o The rest of the series is made up of small bug fixes and cleanups
that relate to various parts of the MIPS code. The biggy in there is
a whitespace cleanup. After I was sent another set of whitespace
cleanup patches I decided it was the time to clean the whitespace
"issues" for once and and that touches many files below arch/mips/.
Fix up silly conflicts, mostly due to whitespace cleanups.
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
MIPS: remove broken conditional inside vpe loader code
MIPS: SMTC: fix implicit declaration of set_vi_handler
MIPS: early_printk: drop __init annotations
MIPS: Probe for and report hardware virtualization support.
MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
MIPS: ath79: add USB controller registration code for the QCA955X SoCs
MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
MIPS: ath79: add WMAC registration code for the QCA955X SoCs
MIPS: ath79: register UART for the QCA955X SoCs
MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
MIPS: ath79: add GPIO setup code for the QCA955X SoCs
MIPS: ath79: add IRQ handling code for the QCA955X SoCs
MIPS: ath79: add clock setup code for the QCA955X SoCs
MIPS: ath79: add SoC detection code for the QCA955X SoCs
MIPS: ath79: add early printk support for the QCA955X SoCs
MIPS: ath79: fix WMAC IRQ resource assignment
mips: reserve elfcorehdr
mips: Make sure kernel memory is in iomem
MIPS: ath79: use dynamically allocated USB platform devices
...
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our FP emulator is hardcoded for the MIPS IV FP instruction set and does
not match the FP ISA with the general ISA. However for the few MIPS IV FP
instructions that use the COP1X major opcode it relies on the Coprocessor
Unusable exception to be delivered as a COP1 rather than COP3 exception.
This includes indexed transfer (LDXC1, etc.) and FP multiply-accumulate
(MADD.D, etc.) instructions.
All the MIPS I, II, III and IV processors and some newer chips that do not
implement the FPU use the COP3 exception however. Therefore I believe the
kernel should follow and redirect any COP3 Unusable traps to the emulator
unless an actual FPU part or core is present.
This is a change that implements it. Any minor opcode encodings that are
not recognised as valid FP instructions are rejected by the emulator and
will result in a SIGILL signal being delivered as they currently do. We
do not support vendor-specific coprocessor 3 implementations supported
with MIPS I and MIPS II ISA processors; we never set CP0.Status.CU3.
[Ralf: On MIPS IV processors the kernel always enables the XX bit which
replaces the CU3 bit off earlier architecture revisions.]
If matching between the CPU and the FPU ISA is considered required one
day, this can still be done in the emulator itself. I think the CpU
exception dispatcher is not the right place to do this anyway, as there
are further differences between MIPS I, MIPS II, MIPS III, MIPS IV and
MIPS32 FP ISAs.
Corresponding explanation of this implementation is included within the
change itself.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/project/linux-mips/list/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Loongson 1B is a 32-bit SoC designed by Institute of Computing Technology
(ICT) and the Chinese Academy of Sciences (CAS), which implements the
MIPS32 release 2 instruction set.
[ralf@linux-mips.org: But which is not strictly a MIPS32 compliant device
which also is why it identifies itself with the Legacy Vendor ID in the
PrID register. When applying the patch I shoveled some code around to
keep things in alphabetical order and avoid forward declarations.]
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Cc: To: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: zhzhl555@gmail.com
Cc: Kelvin Cheung <keguang.zhang@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/3976/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When building oprofile as a module for R10000 or R7000 class processors,
E9000 or MIPSxx class cores since 3572a2c37f
[MIPS: make oprofile use cp0_perfcount_irq if it is set] an
ERROR: "cp0_compare_irq" [arch/mips/oprofile/oprofile.ko] undefined!
error will happen. Fixed by exporting cp0_compare_irq.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
