Commit Graph

14973 Commits

Author SHA1 Message Date
Ondrej Jirman
ae40e94fca dt-bindings: gnss: add u-blox,neo-6m compatible
Add compatible for u-blox NEO-6M GPS module.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2019-04-04 12:43:13 +02:00
Linus Torvalds
52afe190ff TTY/Serial fixes for 5.1-rc3
Here are some small tty and serial driver fixes for 5.1-rc3.
 
 Nothing major here, just a number of potential problems fixes for error
 handling paths, as well as some other minor bugfixes for reported issues
 with 5.1-rc1.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXJ8wCg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylWigCfSPVnxuGsNFTZIN8CUMBH4I5cmjkAnjrN3NdS
 Sumt55mskpi/Ht+5UWmw
 =LFqo
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 5.1-rc3.

  Nothing major here, just a number of potential problems fixes for
  error handling paths, as well as some other minor bugfixes for
  reported issues with 5.1-rc1.

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix NULL pointer issue when tty_port ops is not set
  Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc
  dt-bindings: serial: Add compatible for Mediatek MT8183
  tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
  tty/serial: atmel: Add is_half_duplex helper
  serial: sh-sci: Fix setting SCSCR_TIE while transferring data
  serial: ar933x_uart: Fix build failure with disabled console
  tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup
  sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()
  tty: mxs-auart: fix a potential NULL pointer dereference
  tty: atmel_serial: fix a potential NULL pointer dereference
  serial: max310x: Fix to avoid potential NULL pointer dereference
  serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
2019-03-30 10:30:38 -07:00
Linus Torvalds
4ad528360c Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "A new ID for the i801 driver and some Documentation fixes to make it
  easier for people to find the bindings (which is also a basis for
  further improvements in that area)"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: wmt: make bindings file name match the driver
  i2c: sun6i-p2wi: make bindings file name match the driver
  i2c: stu300: make bindings file name match the driver
  i2c: mt65xx: make bindings file name match the driver
  i2c: iop3xx: make bindings file name match the driver
  i2c: i801: Add support for Intel Comet Lake
2019-03-29 14:56:53 -07:00
Linus Torvalds
1a9df9e29c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Fixes here and there, a couple new device IDs, as usual:

   1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.

   2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.

   3) Fix documentation for some eBPF helpers, from Quentin Monnet.

   4) Some UAPI bpf header sync with tools, also from Quentin Monnet.

   5) Set descriptor ownership bit at the right time for jumbo frames in
      stmmac driver, from Aaro Koskinen.

   6) Set IFF_UP properly in tun driver, from Eric Dumazet.

   7) Fix load/store doubleword instruction generation in powerpc eBPF
      JIT, from Naveen N. Rao.

   8) nla_nest_start() return value checks all over, from Kangjie Lu.

   9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
      merge window. From Marcelo Ricardo Leitner and Xin Long.

  10) Fix memory corruption with large MTUs in stmmac, from Aaro
      Koskinen.

  11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
      Dumazet.

  12) Fix topology subscription cancellation in tipc, from Erik Hugne.

  13) Memory leak in genetlink error path, from Yue Haibing.

  14) Valid control actions properly in packet scheduler, from Davide
      Caratti.

  15) Even if we get EEXIST, we still need to rehash if a shrink was
      delayed. From Herbert Xu.

  16) Fix interrupt mask handling in interrupt handler of r8169, from
      Heiner Kallweit.

  17) Fix leak in ehea driver, from Wen Yang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
  dpaa2-eth: fix race condition with bql frame accounting
  chelsio: use BUG() instead of BUG_ON(1)
  net: devlink: skip info_get op call if it is not defined in dumpit
  net: phy: bcm54xx: Encode link speed and activity into LEDs
  tipc: change to check tipc_own_id to return in tipc_net_stop
  net: usb: aqc111: Extend HWID table by QNAP device
  net: sched: Kconfig: update reference link for PIE
  net: dsa: qca8k: extend slave-bus implementations
  net: dsa: qca8k: remove leftover phy accessors
  dt-bindings: net: dsa: qca8k: support internal mdio-bus
  dt-bindings: net: dsa: qca8k: fix example
  net: phy: don't clear BMCR in genphy_soft_reset
  bpf, libbpf: clarify bump in libbpf version info
  bpf, libbpf: fix version info and add it to shared object
  rxrpc: avoid clang -Wuninitialized warning
  tipc: tipc clang warning
  net: sched: fix cleanup NULL pointer exception in act_mirr
  r8169: fix cable re-plugging issue
  net: ethernet: ti: fix possible object reference leak
  net: ibm: fix possible object reference leak
  ...
2019-03-27 12:22:57 -07:00
Erin Lo
898a737c8a dt-bindings: serial: Add compatible for Mediatek MT8183
This adds dt-binding documentation of uart for Mediatek MT8183 SoC
Platform.

Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28 00:27:48 +09:00
Wolfram Sang
080a910414 i2c: wmt: make bindings file name match the driver
If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27 14:20:20 +01:00
Wolfram Sang
45dfceb0d1 i2c: sun6i-p2wi: make bindings file name match the driver
If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-27 14:20:20 +01:00
Wolfram Sang
0a96f9ffbf i2c: stu300: make bindings file name match the driver
If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27 14:20:20 +01:00
Wolfram Sang
94c87527f4 i2c: mt65xx: make bindings file name match the driver
If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27 14:20:20 +01:00
Wolfram Sang
c4dcd89d20 i2c: iop3xx: make bindings file name match the driver
If we use the "i2c-" prefix for the binding documentation file name,
then it should match the file name of the driver, if possible. It is
possible for this driver, so rename it.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27 14:20:20 +01:00
Christian Lamparter
5e07321f33 dt-bindings: net: dsa: qca8k: support internal mdio-bus
This patch updates the qca8k's binding to document to the
approach for using the internal mdio-bus of the supported
qca8k switches.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26 10:47:10 -07:00
Christian Lamparter
fb1eb41a3d dt-bindings: net: dsa: qca8k: fix example
In the example, the phy at phy@0 is clashing with
the switch0@0 at the same address. Usually, the switches
are accessible through pseudo PHYs which in case of the
qca8k are located at 0x10 - 0x18.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26 10:47:10 -07:00
Thomas Gleixner
3ce8461f45 irqchip updates for 5.1, take #2
- irqsteer error handling fix
 - GICv3 range coalescing fix
 - stm32 coprocessor coexistence fixes
 - mbigen MSI teardown fix
 - non-DT secondary GIC infrastructure removed
 - various cleanups (brcmstb-l2, mmp)
 - new DT bindings (r8a774c0)
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAlyTciIVHG1hcmMuenlu
 Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDHbUP/1ndbJE6O5S24YqbeffNc3dr6hka
 zyYpzY63KtS39TWxrLmZJlXkMecSXlY4QN3FqZd+g81p+E5zUlZ+PklqFYG6pBSj
 6lHsXp4Bo20IAKJTG+4g9K3Am+i3FNoglB2ROPLF4A6pAVvyDWJL0CXCwHG8gLsS
 NbjDIQpcKRFOGO4qdsTNRYjEVaadShz7koLeQQJ8w/Cnraq8u7ETtAq7irmYv/c6
 PX0MUfl12FtqsGZR+xC5th1PYBq5I7E/BsGNnABf9dREpUD4b0IgFV2yPg0r+mMd
 rSU7OZXWv+JLsQuK4FvHdlM1w7d/g5awG67Mt84eScU4LxjVV68MWtsj0WtNpIOp
 sCiQZ9tifBz1C2K/6iXoRLEYbrzUFOyGQX9AZXKoXqCB4eu1ZUKT7zeTtFYxIdPO
 jc9vGT2v7zlKsEpuj5BJEsNSRUJcGZgC7CQvJTxYWLbu7henpPkh6nf/PkbrDKIB
 HtuSygju1YzMH4imvZoVuhB60Bii6ZExVy6a4STYcUJu+Qj8/kyF6sHuZv4YMUnm
 yKGcXxAQE2C2SdYfGl2u0JradMB4kPU1+2uA7uOq/kTxcm30nGJ/YcYYEL/BaXt9
 Clg7WNiTSB6NOrYLhPYOfGa1NwniFTvZWeo9C61o4gslNLukXG885U9swo+NXPYq
 UlJduzmQ0kDJ00ne
 =SBUi
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip updates for 5.1 from Marc Zyngier:

 - irqsteer error handling fix
 - GICv3 range coalescing fix
 - stm32 coprocessor coexistence fixes
 - mbigen MSI teardown fix
 - non-DT secondary GIC infrastructure removed
 - various cleanups (brcmstb-l2, mmp)
 - new DT bindings (r8a774c0)
2019-03-21 12:30:54 +01:00
Fabrizio Castro
24105bf4d1 dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
Document RZ/G2E (R8A774C0) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21 11:08:25 +00:00
Linus Torvalds
2b9c272cf5 fbdev changes for v5.1:
- fix memory access if logo is bigger than the screen (Manfred
   Schlaegl)
 
 - silence fbcon logo on 'quiet' boots (Prarit Bhargava)
 
 - use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko)
 
 - misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu
   Malaterre, Anders Roxell, Arnd Bergmann)
 
 - misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman,
   Jani Nikula, Michal Vokáč)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJci4YTAAoJEH4ztj+gR8IL8jkP/0BkuxHS1ZCP/JAbah/yM838
 yuULNSxsO5FqmoH7n7AqDZ8j0NttMEQirzxN7vv5QkZi6QxWVHIFMaxqQSB4DfMg
 lLF9LFAL/tzKBc5f3dVnD2YzJpNpg715ncfY55Jz0o/as2RE9OLlmwxYGF1VRLIG
 EsBjYm4b0iVCOSu2YxecNCfPoy2LhwdqM8dxXdVgyuDRqxwoD2giC5pNDQVUMvQ3
 037S256DblvedGNdj7g0QmmdvOmsd8jjhE/hJmjrvIp43pHDuFSH9mRZufKTVF3l
 kXIlrJahH35w/Fv2rdWM4PlmuAKBIm49NVaZFfCodjCLIBidPSWNctKQnhY71Skf
 oJSqftgiApVIGweKXYQnFpw964LVe5q85xeVRj3zLr9LCuo4EhiP8ue58eFnwWud
 FTLEgiWSlomrd98t2C6HEnEUMv6XlulI2mAMmqBTZmmV/Vm1hiwHkL6sMFLfuB1A
 Ee1m6LIqMombGsUwkUmRRGqWNeunX1TETVDCXuPb9EyyigSaA1PDtANF9UzXWMNf
 ZKU9Vz0Lq3TFuhr5PolLjiAvXgxf9YLk36VgCu9CoGh/GFpMqRGoDPQkGOxy81E9
 FpXTk7A7XmtUiwX4Tfxy6RrRBBtZWwvuBP79/yyEpl+IVbES/nS6R8TekQp5jbZj
 r/1Z8shbwO4hltu6z14X
 =+ZFI
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-v5.1' of git://github.com/bzolnier/linux

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "Just a couple of small fixes and cleanups:

   - fix memory access if logo is bigger than the screen (Manfred
     Schlaegl)

   - silence fbcon logo on 'quiet' boots (Prarit Bhargava)

   - use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko)

   - misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu
     Malaterre, Anders Roxell, Arnd Bergmann)

   - misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman,
     Jani Nikula, Michal Vokáč)"

* tag 'fbdev-v5.1' of git://github.com/bzolnier/linux:
  fbdev: mbx: fix a misspelled variable name
  fbdev: omap2: fix warnings in dss core
  video: fbdev: Fix potential NULL pointer dereference
  fbcon: Silence fbcon logo on 'quiet' boots
  printk: Export console_printk
  ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity
  video: ssd1307fb: Do not hard code active-low reset sequence
  dt-bindings: display: ssd1307fb: Remove reset-active-low from examples
  fbdev: fbmem: fix memory access if logo is bigger than the screen
  video/fbdev: refactor video= cmdline parsing
  fbdev: mbx: fix up debugfs file creation
  fbdev: omap2: no need to check return value of debugfs_create functions
  video: fbdev: geode: remove ifdef OLPC noise
  video: offb: annotate implicit fall throughs
  omapfb: fix typo
  fbdev: Use of_node_name_eq for node name comparisons
  fbcon: use kvmalloc() for scrollback buffer
  fbdev: chipsfb: remove set but not used variable 'size'
  fbdev/via: fix spelling mistake "Expandsion" -> "Expansion"
2019-03-15 14:22:59 -07:00
Linus Torvalds
f3ca4c55a6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "More fixes in the queue:

  1) Netfilter nat can erroneously register the device notifier twice,
     fix from Florian Westphal.

  2) Use after free in nf_tables, from Pablo Neira Ayuso.

  3) Parallel update of steering rule fix in mlx5 river, from Eli
     Britstein.

  4) RX processing panic in lan743x, fix from Bryan Whitehead.

  5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch.

  6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein.

  7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing
     modes, from Bryan Whitehead.

  8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  pptp: dst_release sk_dst_cache in pptp_sock_destruct
  MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list
  l2tp: fix infoleak in l2tp_ip6_recvmsg()
  net/tls: Inform user space about send buffer availability
  net_sched: return correct value for *notify* functions
  lan743x: Fix TX Stall Issue
  net/mlx4_core: Fix qp mtt size calculation
  net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling
  net/mlx4_core: Fix reset flow when in command polling mode
  mlxsw: minimal: Initialize base_mac
  mlxsw: core: Prevent duplication during QSFP module initialization
  net: dwmac-sun8i: fix a missing check of of_get_phy_mode
  net: sh_eth: fix a missing check of of_get_phy_mode
  net: 8390: fix potential NULL pointer dereferences
  net: fujitsu: fix a potential NULL pointer dereference
  net: qlogic: fix a potential NULL pointer dereference
  isdn: hfcpci: fix potential NULL pointer dereference
  Documentation: devicetree: add a new optional property for port mac address
  net: rocker: fix a potential NULL pointer dereference
  net: qlge: fix a potential NULL pointer dereference
  ...
2019-03-14 09:28:12 -07:00
Linus Torvalds
31ef489a02 dmaengine updates for v5.1-rc1
- dmatest updates for modularizing common struct and code
  - remove SG support for VDMA xilinx IP and updates to driver
  - Update to dw driver to support Intel iDMA controllers
    multi-block support
  - tegra updates for proper reporting of residue
  - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4
  - struct_size() usage and useless LIST_HEAD cleanups in subsystem.
  - qDMA controller driver for Layerscape SoCs
  - stm32-dma PM Runtime support
  - And usual updates to imx-sdma, sprd, Documentation, fsl-edma,
    bcm2835, qcom_hidma etc
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJciVhkAAoJEHwUBw8lI4NHdVoQANDfaY1eruozJobfWX0w1b8U
 0eSCN4M/gRzL/K1nOTWTV9dZFGycGokPBn25lryX6d6VIL+yO7Ptpwls/w0inn0e
 RgVtESQodLZyxcD4iWACVfTGxqxe74/bXCRAq0OCrjt5oX+5KdsBsTrhHvB8dQin
 JWT7Mq6tii5wZHZHl9b4Ds/crxM9+pIHmlzbu5MQiPDL37X9HX4KUoLQCKrVGgZt
 3FjlKEiSS6CnBWP1cs/aHgANr/PjOIwL8SD1t5NPS3i7/2k9z1u16TmmI8SbcyHf
 y9hVy1QPlxC5V85EPYK7JW7JLILotkMToxlX/QhfaFN0PWQq04rp6PCLvObKJuB2
 36QJTwSXBM2/f9bWwkddPyo9Szb3L30K80Vx8zlxzgoXYWtFFB2BXAV57M/I48j2
 gMnxEMZpHD3IupeqlykCmssClVVmCRT8qUZHLNHTdDNu48rLuNlZestFGyBS2Ma2
 D4UcJPiA/IxENy1rz54XoCajL/BIJOsFXXVRikjj3vfbV0Uir0uB9puzwfemMtKz
 tCrJbKwnnDtN30vBZtU7hVu/t4lFYYnl2c945+SpeQC69dysz3IFQGem0kxVHKnH
 INdQH4Od7nQbVQer1EXg4+h3n/rUbcYx/0iLE6JAYyOT80wE+KSlrQ5etqyJ3/qh
 1BxvU49PkUUPzw7aUGgS
 =Ykvn
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:

 - dmatest updates for modularizing common struct and code

 - remove SG support for VDMA xilinx IP and updates to driver

 - Update to dw driver to support Intel iDMA controllers multi-block
   support

 - tegra updates for proper reporting of residue

 - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4

 - struct_size() usage and useless LIST_HEAD cleanups in subsystem.

 - qDMA controller driver for Layerscape SoCs

 - stm32-dma PM Runtime support

 - And usual updates to imx-sdma, sprd, Documentation, fsl-edma,
   bcm2835, qcom_hidma etc

* tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits)
  dmaengine: imx-sdma: fix consistent dma test failures
  dmaengine: imx-sdma: add a test for imx8mq multi sdma devices
  dmaengine: imx-sdma: add clock ratio 1:1 check
  dmaengine: dmatest: move test data alloc & free into functions
  dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func()
  dmaengine: dmatest: wrap src & dst data into a struct
  dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4
  dmaengine: ioatdma: add descriptor pre-fetch support for v3.4
  dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4
  dmaengine: ioatdma: Add Snow Ridge ioatdma device id
  dmaengine: sprd: Change channel id to slave id for DMA cell specifier
  dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier
  dmaengine: mv_xor: Use correct device for DMA API
  Documentation :dmaengine: clarify DMA desc. pointer after submission
  Documentation: dmaengine: fix dmatest.rst warning
  dmaengine: k3dma: Add support for dma-channel-mask
  dmaengine: k3dma: Delete axi_config
  dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
  Documentation: bindings: dma: Add binding for dma-channel-mask
  Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp
  ...
2019-03-14 09:11:54 -07:00
Linus Torvalds
2f194646fe remoteproc updates for v5.1
This contains the last patches in Loic's remoteproc resource table
 handling changes, a number of updates to documentation, support for
 invoking the crash handler (for testing purposes), a fix for the
 handling of virtio devices during recovery, performance state votes in
 Qualcomm modem driver, support for specifying board specific firmware
 path for Qualcomm modem driver and improved support for graceful
 shutdown of Qualcomm remoteprocs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAlyJS1kbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FgtYP/RGxDkPOAXZmJSlurz+Z
 syWop/9s1nLqkSVtXDZ6pthuPtHrQEyAIOfdCbot6X0ZCuAzTnhtdJUzMFlXMBrd
 MDwdwxZEobr1bngz8VENrt1Lny0oy6Zm8ajyr/+xdb3Xw74mcmJ7UDjyIh1w8YPm
 QA6acCYCzRBIwskhlBSqVT2Mf8imAXr1bBV2nh5ngS9+5r1UkGO4/dnXs8mZQRWU
 ZaIfWT9kN2cIxHQH5c5bHCaYP/dmoz5FGyBVYq4OZSuFq+ziG3dQ+VA3YJFv7yUI
 /3P9r4VEJYpR8Tg08lG6SvEtvZ0e0zdtNX0FzYYF8KnpSjB3Vf8k5u/RNnZRn33v
 k5QQivC+YGpG7Rwy1pgyNtZQ881KsmN6JVQxT1rm6ddriSl4TnQXO32lswD2YmM4
 Gt/+Sgu18KEa1ASbOUQk/cRS8Zr3kg2+xDrgBh+Sp0265t+6V9/cGb+PJKkJn9RD
 HRE3fXDdQRwEmp/rhx03kSdlhbfg5A9mTLxb/T5kBR/nC1qLYZV592mvBZS08imk
 7T2zquqP+anwKDOLE++PgJbx6nlzFnPqDTjzohHWns5MfYSGEHagQ21IrDJuzkhG
 nr2r1Gpwkl1dDarvAgYUMCcWGCWvSrUpLfbKYR9QaKWo1JTTDbocBIFF8j7a+eVf
 EiKlGv7SX1LUpXk4K+WabbCr
 =4xC9
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v5.1' of git://github.com/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This contains the last patches in Loic's remoteproc resource table
  handling changes, a number of updates to documentation, support for
  invoking the crash handler (for testing purposes), a fix for the
  handling of virtio devices during recovery, performance state votes in
  Qualcomm modem driver, support for specifying board specific firmware
  path for Qualcomm modem driver and improved support for graceful
  shutdown of Qualcomm remoteprocs"

* tag 'rproc-v5.1' of git://github.com/andersson/remoteproc: (33 commits)
  remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag"
  remoteproc: fix rproc_check_carveout_da() returned error and comments
  remoteproc: fix trace buffer va initialization
  remoteproc: fix rproc_alloc_carveout() for rproc with iommu domain
  remoteproc: add warning on resource table cast
  remoteproc: fix rproc_alloc_carveout() bad variable cast
  remoteproc: fix rproc_da_to_va in case of unallocated carveout
  remoteproc: correct rproc_mem_entry_init() comments
  remoteproc: fix recovery procedure
  rpmsg: virtio: change header file sort style
  rpmsg: virtio: allocate buffer from parent
  remoteproc: st: add reserved memory support
  remoteproc: create vdev subdevice with specific dma memory pool
  remoteproc: q6v5_adsp: Remove voting for lpass_aon clock
  dt-binding: remoteproc: Remove lpass_aon clock from adsp pil clock list
  remoteproc: q6v5-mss: Active powerdomain for SDM845
  remoteproc: q6v5-mss: Vote for rpmh power domains
  remoteproc: qcom: Add support for parsing fw dt bindings
  remoteproc: qcom_q6v5: don't auto boot remote processor
  remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown
  ...
2019-03-14 09:00:06 -07:00
Linus Torvalds
dc2535be1f We have a fairly balanced mix of clk driver updates and clk framework
updates this time around. It's the usual pile of new drivers for new
 hardware out there and the normal small fixes and updates, but then we
 have some core framework changes too.
 
 In the core framework, we introduce support for a clk_get_optional() API
 to get clks that may not always be populated and a way to devm manage clkdev
 lookups registered by provider drivers. We also do some refactoring to simplify
 the interface between clkdev and the common clk framework so we can reuse the DT
 parsing and clk_get() path in provider drivers in the future. This work will
 continue in the next few cycles while we convert how providers specify clk
 parents.
 
 On the driver side, the biggest part of the dirstat is the Amlogic clk driver
 that got support for the G12A SoC. It dominates with almost half the overall
 diff, while the second largest part of the diff is in the i.MX clk driver
 that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor
 and Qualcomm drivers rounding out the big part of the dirstat because they both
 got new hardware support for SoCs. The rest is just various updates and non-critical
 fixes for existing drivers.
 
 Core:
  - Convert a few clk bindings to JSON schema format
  - Add a {devm_}clk_get_optional() API
  - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
  - Start rewriting clk parent registration and supporting device links
    by moving around code that supports clk_get() and DT parsing of the
    'clocks' property
 
 New Drivers:
  - Add Qualcomm MSM8998 RPM managed clks
  - IPA clk support on Qualcomm RPMh clk controllers
  - Actions Semi S500 SoC clk support
  - Support for fixed rate clks populated from an MMIO register
  - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
  - Add TMU (timer) clocks on Renesas RZ/G2E
  - Add Amlogic G12A Always-On Clock Controller
  - Add 32k clock generation for Amlogic AXG
  - Add support for the Mali GPU clocks on Amlogic Meson8
  - Add Amlogic G12A EE clock controller driver
  - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
  - Add i.MX8MM SoC clk driver support
 
 Removed Drivers:
  - Remove clps711x driver as the board support is gone
 
 Updates:
  - 3rd ECO fix for Mediatek MT2712 SoCs
  - Updates for Qualcomm MSM8998 GCC clks
  - Random static analysis fixes for clk drivers
  - Support for sleeping gpios in the clk-gpio type
  - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
  - Split LCDC into two clks on the Marvell MMP2 SoC
  - Various DT of_node refcount fixes
  - Get rid of CLK_IS_BASIC from TI code (yay!)
  - TI Autoidle clk support
  - Fix Amlogic Meson8 APB clock ID name
  - Claim input clocks through DT for Amlogic AXG and GXBB
  - Correct the DU (display unit) parent clock on Renesas RZ/G2E
  - Exynos5433 IMEM CMU crypto clk support (SlimSS)
  - Fix for the PLL-MIPI on the Allwinner A23
  - Fix Rockchip rk3328 PLL rate calculation
  - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
  - i.MX SCU clk driver clk_set_parent() and cpufreq support
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlyIK9URHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUtIA//SRHcUJBuF7bgLs0GWDL/C0WwQf90bgLn
 83jMUX9MCIS+/RBEUi/Xf9psGVaW3YPEAiRcYUeI1YIZhCrdZHp2YGClKOpXaXth
 vgM7Je+6Say+7ru6J9eHqhbEgx2e+HqT4shxK5I5J0SqMFgdugim4pthk+Lr/WL0
 bMdNHTERZUFrIId10RxuCH7D72nhkwiRkwNDfWjASKoH3spXLKC1vl/wbS5QDE1O
 eXA9OwkonSyrBKX7zMeQiks6f7HWoJO7ei05Twv4CD9UEeS17KmB6mkbmT3GPAuq
 dWbLOnt7I80fMnthKLIR0IWtJuCvPv3jXgP+Fin+e4wutNCnuduHIVc2XeQYmDaX
 rbo/20q4DarL2AaakuowXA7UJ75zYfxPkwgpwcYZ/QW9yzT6QMfynAYekjJGTdt3
 6VootYAwYIsh1VMGZIQLs23AaNYayDy0QWx/prxnEi95lK/+zjqVySPYC/rWe7XQ
 rUrO6YY0YxRdf5uVHneIfIJGs5F/Q8DgdLXp4tf2Ud2YF1bZ0UQOUKehxwM0rxRX
 F9P6iP6mHUuUPMa9rDlwSmgQXDdqH7E5IbXdSPjEFBogBfmhJfVKAo1EyaZgUytZ
 Y42qG/P3fGGfegfWTRAoaDRJn/+HfEmtREdgQ8JO14xlZwRDb/M43IEiQP4zGwlc
 f/OuWu3O9xA=
 =D4Bv
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
 "We have a fairly balanced mix of clk driver updates and clk framework
  updates this time around. It's the usual pile of new drivers for new
  hardware out there and the normal small fixes and updates, but then we
  have some core framework changes too.

  In the core framework, we introduce support for a clk_get_optional()
  API to get clks that may not always be populated and a way to devm
  manage clkdev lookups registered by provider drivers. We also do some
  refactoring to simplify the interface between clkdev and the common
  clk framework so we can reuse the DT parsing and clk_get() path in
  provider drivers in the future. This work will continue in the next
  few cycles while we convert how providers specify clk parents.

  On the driver side, the biggest part of the dirstat is the Amlogic clk
  driver that got support for the G12A SoC. It dominates with almost
  half the overall diff, while the second largest part of the diff is in
  the i.MX clk driver that gained support for imx8mm SoCs. After that,
  we have the Actions Semiconductor and Qualcomm drivers rounding out
  the big part of the dirstat because they both got new hardware support
  for SoCs. The rest is just various updates and non-critical fixes for
  existing drivers.

  Core:
   - Convert a few clk bindings to JSON schema format
   - Add a {devm_}clk_get_optional() API
   - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
   - Start rewriting clk parent registration and supporting device links
     by moving around code that supports clk_get() and DT parsing of the
     'clocks' property

  New Drivers:
   - Add Qualcomm MSM8998 RPM managed clks
   - IPA clk support on Qualcomm RPMh clk controllers
   - Actions Semi S500 SoC clk support
   - Support for fixed rate clks populated from an MMIO register
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
   - Add TMU (timer) clocks on Renesas RZ/G2E
   - Add Amlogic G12A Always-On Clock Controller
   - Add 32k clock generation for Amlogic AXG
   - Add support for the Mali GPU clocks on Amlogic Meson8
   - Add Amlogic G12A EE clock controller driver
   - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
   - Add i.MX8MM SoC clk driver support

  Removed Drivers:
   - Remove clps711x driver as the board support is gone

  Updates:
   - 3rd ECO fix for Mediatek MT2712 SoCs
   - Updates for Qualcomm MSM8998 GCC clks
   - Random static analysis fixes for clk drivers
   - Support for sleeping gpios in the clk-gpio type
   - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
   - Split LCDC into two clks on the Marvell MMP2 SoC
   - Various DT of_node refcount fixes
   - Get rid of CLK_IS_BASIC from TI code (yay!)
   - TI Autoidle clk support
   - Fix Amlogic Meson8 APB clock ID name
   - Claim input clocks through DT for Amlogic AXG and GXBB
   - Correct the DU (display unit) parent clock on Renesas RZ/G2E
   - Exynos5433 IMEM CMU crypto clk support (SlimSS)
   - Fix for the PLL-MIPI on the Allwinner A23
   - Fix Rockchip rk3328 PLL rate calculation
   - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
   - i.MX SCU clk driver clk_set_parent() and cpufreq support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
  clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
  clk: fixup default index for of_clk_get_by_name()
  clk: Move of_clk_*() APIs into clk.c from clkdev.c
  clk: Inform the core about consumer devices
  clk: Introduce of_clk_get_hw_from_clkspec()
  clk: core: clarify the check for runtime PM
  clk: Combine __clk_get() and __clk_create_clk()
  clk: imx8mq: add GPIO clocks to clock tree
  clk: mediatek: correct cpu clock name for MT8173 SoC
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
  clk: ingenic: Remove set but not used variable 'enable'
  clk: at91: programmable: remove unneeded register read
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2
  ...
2019-03-14 08:46:17 -07:00
Linus Torvalds
add8462a60 pwm: Changes for v5.1-rc1
The changes for this cycle are across the board. The bulk of it is
 cleanups, but there's also new device support in some drivers as well as
 more conversions to the atomic API.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlyJFvUZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zobfREACTyAxr02GyEQFm4wLLV/OG
 ynJ45IY2g/9OEY6RGmHQXzcBKycmFtifV6uF5PhMr0KZzdfp/uIMnyHsxV7Gm+ia
 NNhG7gQPrb3yZev2AGmc6N/je2+5SL6AZH3+C5ocRqThNKKFknr3uZHbZpmTQlQf
 QV63UYNpwtUrFu7jvzNz1kCBBUispXoDY44W0YSv8RYiKOxwJabPott0oOJH8miF
 lVyCa2yyA8KuW1DTP13XSHMpmUwKGNkiqaFWGIMPFz6ViK5zj/rY92dUIwLegmh7
 l/A7CBMCilw9yd9o1bhSWp2yUJ1gf8QeC64awa0euk9abgX574Nxt+vJsF8EtpaF
 8aCcQrJpjlpPCQV4rP62G8Dcr7tWRNmKWKRNMaXQICpdhcLXuwg6tz4HH8z+I1um
 W+w+9wsiqrRqKyqxlmQEXBi3qSPepJkU/DUsrE7QoO2jbmi21xyVIi1AQHXqNZYo
 y2NzAADuh4i7L8AVFtJ1KcvdZZIBF/XrQXgXEgjX6fQpcs6aMyNOHTu9Xod7XW59
 8yBKKqYmvSmmxDcFFfajkBuUbIuUqIzFxr4U6JYHQsWNnVN1ey+MSlZK6bHA8gw0
 UngjRNv8fEAU0Hck2Z0iwDe1zHVW6g/ZNKZC2TUqzETPvZHg9QKt0sJYGkmxoR5O
 JW1eTekpW57XahV2oX7f3g==
 =TyJJ
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The changes for this cycle are across the board.

  The bulk of it is cleanups, but there's also new device support in
  some drivers as well as more conversions to the atomic API"

* tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits)
  pwm: atmel: Remove useless symbolic definitions
  pwm: bcm-kona: Update macros to remove braces around numbers
  pwm: imx27: Only enable the clocks once in .get_state()
  pwm: rcar: Improve calculation of divider
  pwm: rcar: Remove legacy APIs
  pwm: rcar: Use "atomic" API on rcar_pwm_resume()
  pwm: rcar: Add support "atomic" API
  pwm: atmel: Add support for SAM9X60's PWM controller
  pwm: atmel: Add PWM binding for SAM9X60
  pwm: atmel: Rename objects of type atmel_pwm_data
  pwm: atmel: Add support for controllers with 32 bit counters
  pwm: atmel: Add struct atmel_pwm_data
  pwm: Add MediaTek MT8183 display PWM driver support
  pwm: hibvt: Add hi3559v100 support
  dt-bindings: pwm: hibvt: Add hi3559v100 support
  pwm: hibvt: Use individual struct per of-data
  pwm: imx: Signedness bug in imx_pwm_get_state()
  pwm: imx: Split into two drivers
  pwm: imx: Don't print an error on -EPROBE_DEFER
  pwm: imx: Set driver data earlier simplifying the end of ->probe()
  ...
2019-03-13 10:01:10 -07:00
Linus Torvalds
3a186d3856 - mailbox-test: support multiple controller instances
- misc cleanup: IMX, STM32 and Tegra
 - new driver: ZynqMP IPI
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAlyHy4AACgkQf9lkf8eY
 P5Vv8A/9GEpuQ7otAmBFIZ4ZDrH5QsGH8IEN8LyZTK1a3tWPJWQfvaImIkSe/0Zs
 66jXop2mr7laSV7Wlffm0i761LsYyur6tcA9POQE8u1LFCihOiTRT62xHhYpW8OB
 cpQDQs98gIlEHt/9q8hcmbeiOgi/d30t9BR/+822Dt9zt1E1ca4dGwOqTAGN7IlC
 NGNGJiB57H9CitGMb/Nxx881J+N0zKDqZxepnc9XXz8xIQvNLN9LeNFyXojWs+Qg
 /J3Gs7Y/lcxFXfCW6A4W+BxA6LCEhMEdfo/xmWCHVMiiuzqMTEdiOVDwjyntjdwL
 Q6/RHtb+Z6LE9cIE49NcZfldB9ulslobOmu/RJ6hdab/yx2KeNR05AtXsy0Hd1Mh
 dPyP53FnqxBWqfUOClDqkaHzm+Noe4No9vhVt4WMpirXnMV7N0Y7ZGRLvLbcQ2pK
 wyTYp/xCV4v8KoDrY3iugwFSxsZO0qZ1jPM/skpbFReCsEE/yqN4Ur08dC1oybwA
 0397vm0/1kVMAIsO5IwweMCQXa+wjX4PRQKeDCVy5U3xrkItQYbz9154L3jgoXF/
 PAff/cg/zpgzuEUBTgZvtQuCvClk6ji13tlwUfllG3qW0uqWj0DeDjy+nKFfG/dP
 vO/MAcHN3B/SUtSH9w5LBHzgyGaynxLyP5U4qTk1+E1Rs/ZlpOE=
 =eeym
 -----END PGP SIGNATURE-----

Merge tag 'mailbox-v5.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jassi Brar:

 - mailbox-test: support multiple controller instances

 - misc cleanup: IMX, STM32 and Tegra

 - new driver: ZynqMP IPI

* tag 'mailbox-v5.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: imx: keep MU irq working during suspend/resume
  dt-bindings: mailbox: Add Xilinx IPI Mailbox
  mailbox: ZynqMP IPI mailbox controller
  mailbox: stm32-ipcc: remove useless device_init_wakeup call
  mailbox: stm32-ipcc: do not enable wakeup source by default
  mailbox: mailbox-test: fix null pointer if no mmio
  mailbox: mailbox-test: fix debugfs in multi-instances
  mailbox: tegra-hsp: mark suspend function as __maybe_unused
2019-03-13 09:59:08 -07:00
Vinod Koul
feb59d77a4 Merge branch 'topic/xilinx' into for-linus 2019-03-12 12:05:47 +05:30
Vinod Koul
989e3af3af Merge branch 'topic/k3dma' into for-linus 2019-03-12 12:04:09 +05:30
Vinod Koul
79074168de Merge branch 'topic/fsl' into for-linus 2019-03-12 12:03:55 +05:30
Vinod Koul
278489c2e1 Merge branch 'topic/dw' into for-linus 2019-03-12 12:03:47 +05:30
xiaofeis
c6873d18cb Documentation: devicetree: add a new optional property for port mac address
Add documentation for a new optional property local-mac-address which
is described in ethernet.txt.

Signed-off-by: xiaofeis <xiaofeis@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11 16:21:09 -07:00
Linus Torvalds
a089e4fed5 linux-watchdog 5.1-rc1 tag
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAlyFIfgACgkQ+iyteGJfRsqt4gCgrgwSrDhwW+u7NjyY48KGAPgt
 xM8AoM31H9C2HrT2IJuKa3FjIawceUfw
 =wj0o
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-5.1-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - a new watchdog driver for the Mellanox systems

 - renesas-wdt: Document r8a77470 support

 - numerous 'Mark expected switch fall-throughs'

 - qcom: Add suspend/resume support

 - some small fixes and documentation updates

* tag 'linux-watchdog-5.1-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: w83877f_wdt: Mark expected switch fall-through
  watchdog: sc520_wdt: Mark expected switch fall-through
  watchdog: sbc60xxwdt: Mark expected switch fall-through
  watchdog: smsc37b787_wdt: Mark expected switch fall-through
  watchdog: sc1200: Mark expected switch fall-through
  watchdog: pc87413: Mark expected switch fall-through
  Documentation/watchdog: Add documentation mlx-wdt driver
  watchdog: mlx-wdt: introduce a watchdog driver for Mellanox systems.
  platform_data/mlxreg: additions for Mellanox watchdog driver.
  watchdog: Update sysfs documentation.
  watchdog: dw: remove useless pr_fmt
  watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init
  watchdog/hpwdt: Update Kconfig documentation
  dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  watchdog: qcom: Add suspend/resume support
2019-03-11 11:22:15 -07:00
Linus Torvalds
cf0240a755 This is the bulk of pin control changes for the v5.1 kernel cycle.
No core changes.
 
 New drivers:
 
 - NXP (ex Freescale) i.MX 8QM driver.
 
 - NXP (ex Freescale) i.MX 8MM driver.
 
 - AT91 SAM9X60 subdriver.
 
 Improvements:
 
 - Support for external interrups (EINT) on Mediatek virtual GPIOs.
 
 - Make BCM2835 pin config fully generic.
 
 - Lots of Renesas SH-PFC incremental improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJchil8AAoJEEEQszewGV1zTCcP/AurT3InBO4nVdN9UMuoDL7P
 gx3SALULapc4+M1NUoRw+w+z5fvjd0gGdPXZeyhX1E9kXxLmWBmBf6tl0MO2YYPC
 UWbSnBaWIOOli0f4k+GKVF8LKqD0z0e/YqX4mG7UI3OLJzcJgm7OL9uXN3Gh7tIP
 Pa6CGbv0aRDkZpWUD2ZTpSPCRYGT57roVq//d7V7s+0lveS97pQuMv43YlS5L2my
 JOOhHNG33bgi4lS/ZOP81G16oOrVaoupXuX7E+AvgG6vxr5965Fi+qoGLkxIuYOm
 jtrzuNY98eL2m9b505VYdNmD7ouBhG6CKFb4njpOvjkkqNUXOaGV53wlEuEYRUNz
 bsp0596+dlOcW7wl11r6YI4Kyn2wQJFql1AwS8A4dEtbuboGrDy16N3adr1SkIGZ
 4ESN8xydcC7CAgUGXks+AgDj9vYwOs4apylJDW5tMk4K0LIsEYsDkbNeS9hwDYIH
 ZlbQe9N2loB6qQbX3c3D3/sIhKj2VB4elONSwOW10M8OJdJwp8h44UyMZ3TIEHIT
 7Gu9pw5vobXbccKCSjqkYYflaHMmjwZUtLqDZws818sbe/xgDxONbRqloZCLV39Y
 kmwRGbbE5WtNAM0X+ABwMG3Lm77wxCFKCjJwLHH79qqt4kSBynEKXQ4D/coG/Hln
 6idanzKEPiIBJ+6QLdbQ
 =EfXK
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is a calm cycle, not much happened this time around: not even
  much incremental development. Some three new drivers, that is all.

  No core changes.

  New drivers:

   - NXP (ex Freescale) i.MX 8QM driver.

   - NXP (ex Freescale) i.MX 8MM driver.

   - AT91 SAM9X60 subdriver.

  Improvements:

   - Support for external interrups (EINT) on Mediatek virtual GPIOs.

   - Make BCM2835 pin config fully generic.

   - Lots of Renesas SH-PFC incremental improvements"

* tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits)
  pinctrl: imx: fix scu link errors
  dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding
  pinctrl: qcom: spmi-gpio: Reorder debug print
  pinctrl: nomadik: fix possible object reference leak
  pinctrl: stm32: return error upon hwspinlock failure
  pinctrl: stm32: fix memory leak issue
  pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions
  pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions
  pinctrl: sh-pfc: Validate fixed-size field widths at build time
  pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups
  pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group
  pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group
  pinctrl: sh-pfc: emev2: Add missing pinmux functions
  pinctrl: sunxi: Support I/O bias voltage setting on A80
  pinctrl: ingenic: Add LCD pins for the JZ4725B SoC
  pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask
  pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl
  pinctrl: bcm2835: declare pin config as generic
  pinctrl: qcom: qcs404: Drop unused UFS_RESET macro
  dt-bindings: add documentation for slew rate
  ...
2019-03-11 11:12:50 -07:00
Linus Torvalds
4f0237062c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:

 - update the ili210x touchscreen driver, refreshing the code and adding
   support for ILI251X line

 - add support for st1633 to the st1232 touchscreen driver

 - add support for sx8650 to the the sx8654 touchscreen driver

 - add support for Evervision FT5726 to the edt-ft5x06 touchscreen
   driver

 - add support for gt5688 to the Goodix touchscreen driver

 - new vibrator driver for MSM SOCs

 - miscellaneous fixes for the rest of input drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
  Input: wacom_serial4 - add support for Wacom ArtPad II tablet
  Input: elan_i2c - add id for touchpad found in Lenovo s21e-20
  Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV
  Input: msm-vibrator - use correct gpio header
  Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev'
  Input: i8042 - rework DT node name comparisons
  Input: goodix - print values in case of inconsistencies
  Input: goodix - refer to touchscreen.txt in device tree bindings
  Input: goodix - support Goodix gt5688
  Input: synaptics_i2c - remove redundant spinlock
  Input: db9 - mark expected switch fall-through
  Input: qt2160 - remove redundant spinlock
  Input: st1232 - handle common DT bindings
  Input: ims-pcu - switch to using brightness_set_blocking()
  Input: st1232 - switch to gpiod API
  Input: ili210x - fetch touchscreen geometry from DT
  Input: msm-vibrator - tweak an error message
  Input: tm2-touchkey - acknowledge that setting brightness is a blocking call
  Input: stmfts - acknowledge that setting brightness is a blocking call
  Input: ili210x - switch to using devm_device_add_group()
  ...
2019-03-11 10:57:11 -07:00
Linus Torvalds
8f49a658b4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "First batch of fixes in the new merge window:

   1) Double dst_cache free in act_tunnel_key, from Wenxu.

   2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the
      ip_route_input_rcu() path, from Paolo Abeni.

   3) Fix appletalk compile regression, from Arnd Bergmann.

   4) If SLAB objects reach the TCP sendpage method we are in serious
      trouble, so put a debugging check there. From Vasily Averin.

   5) Memory leak in hsr layer, from Mao Wenan.

   6) Only test GSO type on GSO packets, from Willem de Bruijn.

   7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet.

   8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe.

   9) Fix race in ipv4 route exception handling, from Xin Long.

  10) Missing DMA memory barrier in hns3 driver, from Jian Shen.

  11) Use after free in __tcf_chain_put(), from Vlad Buslov.

  12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault.

  13) Return value correction when ip_mc_may_pull() fails, from Eric
      Dumazet.

  14) Use after free in x25_device_event(), also from Eric"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
  gro_cells: make sure device is up in gro_cells_receive()
  vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
  net/x25: fix use-after-free in x25_device_event()
  isdn: mISDNinfineon: fix potential NULL pointer dereference
  net: hns3: fix to stop multiple HNS reset due to the AER changes
  ip: fix ip_mc_may_pull() return value
  net: keep refcount warning in reqsk_free()
  net: stmmac: Avoid one more sometimes uninitialized Clang warning
  net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports
  rxrpc: Fix client call queueing, waiting for channel
  tcp: handle inet_csk_reqsk_queue_add() failures
  net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry
  8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC
  fou, fou6: avoid uninit-value in gue_err() and gue6_err()
  net: sched: fix potential use-after-free in __tcf_chain_put()
  vhost: silence an unused-variable warning
  vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
  connector: fix unsafe usage of ->real_parent
  vxlan: do not need BH again in vxlan_cleanup()
  net: hns3: add dma_rmb() for rx description
  ...
2019-03-11 08:54:01 -07:00
Linus Torvalds
ffd602eb46 Kbuild updates for v5.1
- do not generate unneeded top-level built-in.a
 
  - let git ignore O= directory entirely
 
  - optimize scripts/kallsyms slightly
 
  - exclude DWARF info from *.s regardless of config options
 
  - fix GCC toolchain search path for Clang to prepare ld.lld support
 
  - do not generate modules.order when CONFIG_MODULES is disabled
 
  - simplify single target rules and remove VPATH for external module build
 
  - allow to add optional flags to dpkg-buildpackage when building deb-pkg
 
  - move some compiler option tests from Makefile to Kconfig
 
  - various Makefile cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcgxYUAAoJED2LAQed4NsGr7YQAJq4LmN/aZDI9Mt0YAQjEyyA
 PCpm8J2HI9HO1sMoY7J/ksWmV0BU25G+uspKD7dXAQo3l9fmahQM5e4dsyZ4Xqs8
 DyyYSGtJJnMJaWmupIZNA4UKDCVtwPoVW8YeuK9rwADVokCux9avogof9O1OoA/E
 Pylo+I4UCM82kbpZSd+UxnCx6B0v8XGtW+d31Q4yZXCkw5nw14chrlaprcqB3UgB
 +7C3xOnDWCi7gyxaTqmD7dLay2DM8KCDlznEvBL733Y/cK3to1fywzEPzp0JQCLX
 BLgmmpW13NF++q5BCoTW6sFjZAhBVbiYZwesMrCi75Y32T8zt4G5l4pkvGkSuGF/
 UQh5aoCxaMIp70VPj/loZ0lh78nwVGTok9zRb0rfztM0X4DbmiPi5MNiHRzRpIeE
 1jjEa/GK1t0TDnXc/MuDFK8cWwdhttIqUL5yWfAxjXbtP27eLtsopQUdW7EPHs7d
 sMnfuSUuhOC28yByVxIkBcwawLyYrcWRphJ3ixCO70CoJWt2DT6aOKxcFJefoJix
 Pto6Oo3oQ4iypMM5M9/0Uo+AK2TKRejWIqtZdbo+ir70tNxVH3WDZq++fG0drXOB
 r2I/GY6nRjuzLOe2jzEqywFTFd2xpk4Qo84LGb1R3U6aU5qS2gA0W/q00JS5c2qU
 R8uReJ7bvmLmrVNZ/NI4
 =y9YG
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - do not generate unneeded top-level built-in.a

 - let git ignore O= directory entirely

 - optimize scripts/kallsyms slightly

 - exclude DWARF info from *.s regardless of config options

 - fix GCC toolchain search path for Clang to prepare ld.lld support

 - do not generate modules.order when CONFIG_MODULES is disabled

 - simplify single target rules and remove VPATH for external module
   build

 - allow to add optional flags to dpkg-buildpackage when building
   deb-pkg

 - move some compiler option tests from Makefile to Kconfig

 - various Makefile cleanups

* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
  kbuild: remove scripts/basic/% build target
  kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
  kbuild: clean up scripts/gcc-version.sh
  kbuild: remove cc-version macro
  kbuild: update comment block of scripts/clang-version.sh
  kbuild: remove commented-out INITRD_COMPRESS
  kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
  kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
  kbuild: move ".config not found!" message from Kconfig to Makefile
  kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
  kbuild: simplify single target rules
  kbuild: remove empty rules for makefiles
  kbuild: make -r/-R effective in top Makefile for old Make versions
  kbuild: move tools_silent to a more relevant place
  kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
  kbuild: refactor cc-cross-prefix implementation
  kbuild: hardcode genksyms path and remove GENKSYMS variable
  scripts/gdb: refactor rules for symlink creation
  kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
  scripts/gdb: do not descend into scripts/gdb from scripts
  ...
2019-03-10 17:48:21 -07:00
Linus Torvalds
bb97be23db IOMMU Updates for Linux v5.1
Including:
 
 	- A big cleanup and optimization patch-set for the
 	  Tegra GART driver
 
 	- Documentation updates and fixes for the IOMMU-API
 
 	- Support for page request in Intel VT-d scalable mode
 
 	- Intel VT-d dma_[un]map_resource() support
 
 	- Updates to the ATS enabling code for PCI (acked by Bjorn) and
 	  Intel VT-d to align with the latest version of the ATS spec
 
 	- Relaxed IRQ source checking in the Intel VT-d driver for some
 	  aliased devices, needed for future devices which send IRQ
 	  messages from more than on request-ID
 
 	- IRQ remapping driver for Hyper-V
 
 	- Patches to make generic IOVA and IO-Page-Table code usable
 	  outside of the IOMMU code
 
 	- Various other small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAlyCNlIACgkQK/BELZcB
 GuNDiRAAscgYj0BdqpZVUNHl4PySR12QJpS1myl/OC4HEbdB/EOh+bYT4Q1vptCU
 GNK6Gt9SVfcbtWrLiGfcP9ODXmbqZ6AIOIbHKv9cvw1mnyYAtVvT/kck7B/W5jEr
 /aP/5RTO7XcqscWO44zBkrtLFupegtpQFB0jXYTJYTrwQoNKRqCUqfetZGzMkXjL
 x/h7kFTTIRcVP8RFcOeAMwC6EieaI8z8HN976Gu7xSV8g0VJqoNsBN8jbUuBh5AN
 oPyd9nl1KBcIQEC1HsbN8I5wIhTh1sJ2UDqFHAgtlnO59zWHORuFUUt6SXbC9UqJ
 okJTzFp9Dh2BqmFPXxBTxAf3j+eJP2XPpDI9Ask6SytEPhgw39fdlOOn2MWfSFoW
 TaBJ4ww/r98GzVxCP7Up98xFZuHGDICL3/M7Mk3mRac/lgbNRbtfcBa5NV4fyQhY
 184t656Zm/9gdWgGAvYQtApr6/iI+wRMLkIwuw63wqH09yfbDcpTOo6DEQE3B5KR
 4H1qSIiVGVVZlWQateR6N32ZmY4dWzpnL2b8CfsdBytzHHFb/c3dPnZB8fxx9mwF
 onyvjg9nkIiv7mdcN4Ox2WXrAExTeSftyPajN0WWawNJU3uPTBgNrqNHyWSkiaN4
 dAvEepfGuFQGz2Fj03Pv7OqY8veyRezErVRLwiMJRNyy7pi6Wng=
 =cKsD
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - A big cleanup and optimization patch-set for the Tegra GART driver

 - Documentation updates and fixes for the IOMMU-API

 - Support for page request in Intel VT-d scalable mode

 - Intel VT-d dma_[un]map_resource() support

 - Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel
   VT-d to align with the latest version of the ATS spec

 - Relaxed IRQ source checking in the Intel VT-d driver for some aliased
   devices, needed for future devices which send IRQ messages from more
   than on request-ID

 - IRQ remapping driver for Hyper-V

 - Patches to make generic IOVA and IO-Page-Table code usable outside of
   the IOMMU code

 - Various other small fixes and cleanups

* tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
  iommu/vt-d: Get domain ID before clear pasid entry
  iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm()
  iommu/vt-d: Set context field after value initialized
  iommu/vt-d: Disable ATS support on untrusted devices
  iommu/mediatek: Fix semicolon code style issue
  MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scope
  iommu/hyper-v: Add Hyper-V stub IOMMU driver
  x86/Hyper-V: Set x2apic destination mode to physical when x2apic is available
  PCI/ATS: Add inline to pci_prg_resp_pasid_required()
  iommu/vt-d: Check identity map for hot-added devices
  iommu: Fix IOMMU debugfs fallout
  iommu: Document iommu_ops.is_attach_deferred()
  iommu: Document iommu_ops.iotlb_sync_map()
  iommu/vt-d: Enable ATS only if the device uses page aligned address.
  PCI/ATS: Add pci_ats_page_aligned() interface
  iommu/vt-d: Fix PRI/PASID dependency issue.
  PCI/ATS: Add pci_prg_resp_pasid_required() interface.
  iommu/vt-d: Allow interrupts from the entire bus for aliased devices
  iommu/vt-d: Add helper to set an IRTE to verify only the bus number
  iommu: Fix flush_tlb_all typo
  ...
2019-03-10 12:29:52 -07:00
Linus Torvalds
065b6c4c91 Devicetree updates for v5.1:
- Fix a unittest failure on UML. Preparation for converting to
   kunit test framework.
 
 - Add annotations to dtx_diff output
 
 - Fix unittest reporting of expected error
 
 - Move DMA configuration for virtual devices into the driver that
   needs it (s5p-mfc)
 
 - Vendor prefixes for feiyang and techstar
 
 - Convert ARM GIC, GICv3, and L2x0 to DT schema
 
 - Add r8a7778/9 HSCIF serial bindings
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlyC0hoQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhwzMdD/93737AUFqQNfMXlsrZs/OS9dGTQdYtuFOw
 Z2643O1l5QTPAleBqQWVGpxph67pQf3uZ+7zAsknJkweysMaDG1Ej22sFnyIM+Hh
 +IeLBYOtB7hd6FSCX40apT6Jlw2KG7Lqk0JvXVv7yXJRptsf7R6oUw8GoxxUBbsp
 4fL1IwuAyq3TrMtGETl7MW4QJma9A8zo9ngQSiRQr9yflROmE1dXjge+KPHOsTRr
 9PU6NSgsuUG0eBw9stL4bDZwXXGb3sEcXaItY5A37JTI6bLgPuk8cA4lp+gTL5RK
 77uGs8rbe8WqFPWeMmDwRdbSDasb52NDfGBG5Dj7n7tHVP7rubyA1XK3fVK5udjZ
 hHhQa0G5gLBnd9/7Je8udkvwH9ef/BjnHp1KFOBrCMLCgYX+QZQZUNwuTI5/l6E3
 A/dOo6JG+rshtI3P3Up69XOu1KMhacNVu/TTHVGkUeq5vf+iKr1BYu2VsVIHdQh7
 hdJ6syheq3qHBAOOuB5Z+yyFzwh1w98gpqlG8lUSYjnochej4YSgNTMef9vhdWZg
 vTdP/XNnYvH9XTqxSAhfIxUWeaggrngYQCQhci8F57DskKkPKeyFhxo7ODGD4bI6
 hXcUgk2OtEF2Sgk+X9XCtI5vJXuXvGxmlpZpdUe7LiVE3CnOwfFxvLfIhpw+2AIp
 /7S2Khwnsg==
 =CnTd
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:

 - Fix a unittest failure on UML. Preparation for converting to kunit
   test framework.

 - Add annotations to dtx_diff output

 - Fix unittest reporting of expected error

 - Move DMA configuration for virtual devices into the driver that needs
   it (s5p-mfc)

 - Vendor prefixes for feiyang and techstar

 - Convert ARM GIC, GICv3, and L2x0 to DT schema

 - Add r8a7778/9 HSCIF serial bindings

* tag 'devicetree-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: unittest: unflatten device tree on UML when testing
  dt-bindings: Add vendor prefix for feiyang
  dt-bindings: Add vendor prefix for techstar
  dt-bindings: display: add missing semicolon in example
  of: mark early_init_dt_alloc_reserved_memory_arch static
  of: add dtc annotations functionality to dtx_diff
  of: unittest: add caution to function header comment
  of: unittest: remove report of expected error
  dt-bindings: interrupt-controller: Convert ARM GICv3 to json-schema
  dt-bindings: interrupt-controller: Convert ARM GIC to json-schema
  dt-bindings: arm: l2x0: Convert L2 cache to json-schema
  media: s5p-mfc: Fix memdev DMA configuration
  dt-bindings: serial: sh-sci: Document r8a7778/9 HSCIF bindings
2019-03-10 10:58:43 -07:00
Linus Torvalds
3d8dfe75ef arm64 updates for 5.1:
- Pseudo NMI support for arm64 using GICv3 interrupt priorities
 
 - uaccess macros clean-up (unsafe user accessors also merged but
   reverted, waiting for objtool support on arm64)
 
 - ptrace regsets for Pointer Authentication (ARMv8.3) key management
 
 - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the
   riscv maintainers)
 
 - arm64/perf updates: PMU bindings converted to json-schema, unused
   variable and misleading comment removed
 
 - arm64/debug fixes to ensure checking of the triggering exception level
   and to avoid the propagation of the UNKNOWN FAR value into the si_code
   for debug signals
 
 - Workaround for Fujitsu A64FX erratum 010001
 
 - lib/raid6 ARM NEON optimisations
 
 - NR_CPUS now defaults to 256 on arm64
 
 - Minor clean-ups (documentation/comments, Kconfig warning, unused
   asm-offsets, clang warnings)
 
 - MAINTAINERS update for list information to the ARM64 ACPI entry
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlyCl0cACgkQa9axLQDI
 XvEyKxAAiogBZLbyhcy8bTUHVzVoJE0FyAkdO2wWnnaff2Ohkhy1Y/npv33IeK2q
 RknxqDIx2DUUVPJNRZGoI/WwBtTZdKaAnW4rIKG84yC1eAkFcd96WQasaZzcp1qY
 HmvbJiYXM0bh+0J7i3Wgry/QzOkrltJFJW2kp6Wd5aFE+R1WyWyxT6d+Fp0J3vlA
 bT70jlpBK6LXEOmmBS+04Ml02+8MvaGxIl8EInBHSfDLRLErj5E8n41rRHKUiSWz
 maWI+kVoLYwOE68xiZlDftUBEeQpUSWgg2nxeK+640QSl1wJmVcRcY9nm6TZeMG2
 AiZTR9a7cP5rrdSN5suUmb7d4AMMVlVMisGDlwb+9oCxeTRDzg0uwACaVgHfPqQr
 UeBdHbL9nStN7uBH23H8L9mKk+tqpFmk0sgzdrKejOwysAiqWV8aazb/Na3qnVRl
 J1B5opxMnGOsjXmHvtG/tiZl281Uwz5ZmzfLmIY3gUZgUgdA3511Egp0ry5y1dzJ
 SkYC4Hmzb2ybQvXGIDDa3OzCwXXiqyqKsO+O8Egg1k4OIwbp3w+NHE7gKeA+dMgD
 gjN7zEalCUi46Q28xiCPEb+88BpQ18czIWGQLb9mAnmYeZPjqqenXKXuRHr4lgVe
 jPURJ/vqvFEglZJN1RDuQHKzHEcm5f2XE566sMZYdSoeiUCb0QM=
 =2U56
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - Pseudo NMI support for arm64 using GICv3 interrupt priorities

 - uaccess macros clean-up (unsafe user accessors also merged but
   reverted, waiting for objtool support on arm64)

 - ptrace regsets for Pointer Authentication (ARMv8.3) key management

 - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by
   the riscv maintainers)

 - arm64/perf updates: PMU bindings converted to json-schema, unused
   variable and misleading comment removed

 - arm64/debug fixes to ensure checking of the triggering exception
   level and to avoid the propagation of the UNKNOWN FAR value into the
   si_code for debug signals

 - Workaround for Fujitsu A64FX erratum 010001

 - lib/raid6 ARM NEON optimisations

 - NR_CPUS now defaults to 256 on arm64

 - Minor clean-ups (documentation/comments, Kconfig warning, unused
   asm-offsets, clang warnings)

 - MAINTAINERS update for list information to the ARM64 ACPI entry

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  arm64: mmu: drop paging_init comments
  arm64: debug: Ensure debug handlers check triggering exception level
  arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals
  Revert "arm64: uaccess: Implement unsafe accessors"
  arm64: avoid clang warning about self-assignment
  arm64: Kconfig.platforms: fix warning unmet direct dependencies
  lib/raid6: arm: optimize away a mask operation in NEON recovery routine
  lib/raid6: use vdupq_n_u8 to avoid endianness warnings
  arm64: io: Hook up __io_par() for inX() ordering
  riscv: io: Update __io_[p]ar() macros to take an argument
  asm-generic/io: Pass result of I/O accessor to __io_[p]ar()
  arm64: Add workaround for Fujitsu A64FX erratum 010001
  arm64: Rename get_thread_info()
  arm64: Remove documentation about TIF_USEDFPU
  arm64: irqflags: Fix clang build warnings
  arm64: Enable the support of pseudo-NMIs
  arm64: Skip irqflags tracing for NMI in IRQs disabled context
  arm64: Skip preemption when exiting an NMI
  arm64: Handle serror in NMI context
  irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI
  ...
2019-03-10 10:17:23 -07:00
Linus Torvalds
92fff53b71 SCSI misc on 20190306
This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
 hisi_sas, target/iscsi and target/core.  Additionally Christoph
 refactored gdth as part of the dma changes.  The major mid-layer
 change this time is the removal of bidi commands and with them the
 whole of the osd/exofs driver and filesystem.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIC54SYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT1GAPwJEV23
 ExPiPsnuVgKj49nLTagZ3rILRQcYNbL+MNYqxQEA0cT8FHzSDBfWY5OKPNE+RQ8z
 f69LpXGmMpuagKGvvd4=
 =Fhy1
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
  scsi: cxgb4i: get pf number from lldi->pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...
2019-03-09 16:53:47 -08:00
Linus Torvalds
2901752c14 pci-v5.1-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlyCpL0UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vzoHw//ZyFbwekF0mV3RZwcV35LkScIOw0d
 O1DgjJo8UbuV51+/foQeUZ8IzjHlybQhoFdJupPuw+LyaDUkwqjAmdtY8J/FjWSm
 AJeVzu6gMF0Z9kwwGO4NyqX2EWluTD0xNLgf8g+fe3p1MtEuH6VCrqe+hk3wma0K
 CrSIKWY/sO408SpAaWiLTEZmVT+hXiP9hJw1qTrbqKLtyWa4oCjErdoyUDsA01+5
 gPndKC/3pu6q6q9Dd94582HuQaE2dKHWQXx6Fzd/tdCyYffpbOUAUNP3aRXaTKrS
 MwKxOF3y7yUnz5RbxRgopwNVf5WyXhCnnPZRLaSxqnTSZCY6FCUi3l6RpVyWu2Ha
 iztBbkTP/x6WV3VWg810qgQKQ9wl8oALMkoOfR6lWCR7MTuJnMXJtbrz0jWpEC2O
 ZPwK9fAxFj2/3e13hx88O7Ek8kfajTPM8T15K79pvpljfqa0BD9SrhPyQ5ssmxj4
 idz4yIFCATULKszPXA1QbfC1/xCDveQOEPSerL3eACXsLN17vfpOwOT9vWJm6bpr
 6u5ggM2dEA07eI1ANnY6twn5g0kSYU9qISNQO98tA86IvaCnME0Z+k+SCwUNIM9U
 ep9k0NdAGDNsYOfdVEEY0fYGT9k+9f9w8AfZLNvh0N3s7mGQQ35jf0Z75jj/jsor
 cbMcPAN2jOCyFVs=
 =vf9L
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - Use match_string() instead of reimplementing it (Andy Shevchenko)

 - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada)

 - Use Latency Tolerance Reporting if already enabled by platform (Bjorn
   Helgaas)

 - Save/restore LTR info for suspend/resume (Bjorn Helgaas)

 - Fix DPC use of uninitialized data (Dongdong Liu)

 - Probe bridge window attributes only once at enumeration-time to fix
   device accesses during rescan (Bjorn Helgaas)

 - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du
   Changbin)

 - Use config header type (not class code) identify bridges more
   reliably (Honghui Zhang)

 - Work around Intel Denverton incorrect Trace Hub BAR size reporting
   (Alexander Shishkin)

 - Reorder pciehp cached state/hardware state updates to avoid missed
   interrupts (Mika Westerberg)

 - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann)

 - Mark expected switch fall-through (Mathieu Malaterre)

 - Use of_node_name_eq() for node name comparisons (Rob Herring)

 - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang)

 - Consolidate Rohm Vendor ID definitions (Andy Shevchenko)

 - Use u32 (not __u32) for things not exposed to userspace (Logan
   Gunthorpe)

 - Fix locking semantics of bus and slot reset interfaces (Alex
   Williamson)

 - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang)

 - Allow portdrv to claim subtractive decode Ports so PCIe services will
   work for them (Honghui Zhang)

 - Report PCIe links that become degraded at run-time (Alexandru
   Gagniuc)

 - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt
   hotplug (Mika Westerberg)

 - Revert runtime PM suspend/resume callbacks that broke PME on network
   cable plug (Mika Westerberg)

 - Disable Data Link State Changed interrupts to prevent wakeup
   immediately after suspend (Mika Westerberg)

 - Extend altera to support Stratix 10 (Ley Foon Tan)

 - Allow building altera driver on ARM64 (Ley Foon Tan)

 - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint
   maintainer (Lorenzo Pieralisi)

 - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro)

 - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I)

 - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay
   Abraham I)

 - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I)

 - Simplify dwc (remove unnecessary header includes, name variables
   consistently, reduce inverted logic, etc) (Gustavo Pimentel)

 - Add i.MX8MQ support (Andrey Smirnov)

 - Add message to help debug dwc MSI-X mask bit errors (Gustavo
   Pimentel)

 - Work around imx7d PCIe PLL erratum (Trent Piepho)

 - Don't assert qcom reset GPIO during probe (Bjorn Andersson)

 - Skip dwc MSI init if MSIs have been disabled (Lucas Stach)

 - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI
   endpoint framework (Wen Yang)

 - Add interface to discover supported endpoint features to replace a
   bitfield that wasn't flexible enough (Kishon Vijay Abraham I)

 - Implement the new supported-feature interface for designware-plat,
   dra7xx, rockchip, cadence (Kishon Vijay Abraham I)

 - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I)

 - Add layerscape endpoint mode support (Xiaowei Bao)

 - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya
   Nakamura)

 - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of
   open-coded reimplementation (Maya Nakamura)

 - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura)

 - Fix mediatek MMIO size computation to enable full size of available
   MMIO space (Honghui Zhang)

 - Fix mediatek DMA window size computation to allow endpoint DMA access
   to full DRAM address range (Honghui Zhang)

 - Fix mvebu prefetchable BAR regression caused by common bridge
   emulation that assumed all bridges had prefetchable windows (Thomas
   Petazzoni)

 - Make advk_pci_bridge_emul_ops static (Wei Yongjun)

 - Configure MPS settings for VMD root ports (Jon Derrick)

* tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
  PCI: Update PCIEPORTBUS Kconfig help text
  PCI: Fix "try" semantics of bus and slot reset
  PCI/LINK: Report degraded links via link bandwidth notification
  dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
  PCI: altera: Enable driver on ARM64
  PCI: altera: Add Stratix 10 PCIe support
  PCI/PME: Fix possible use-after-free on remove
  PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static
  PCI: dwc: skip MSI init if MSIs have been explicitly disabled
  PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
  PCI: hv: Replace hv_vp_set with hv_vpset
  PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt
  PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM
  PCI: mediatek: Fix memory mapped IO range size computation
  PCI: dwc: Remove superfluous shifting in definitions
  PCI: dwc: Make use of GENMASK/FIELD_PREP
  PCI: dwc: Make use of BIT() in constant definitions
  PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()
  PCI: dwc: Make use of IS_ALIGNED()
  PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ
  ...
2019-03-09 14:57:08 -08:00
Linus Torvalds
96a6de1a54 media updates for v5.1-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcgUDlAAoJEAhfPr2O5OEV2kIP/AiHMkMGi/fXmwzN0tFjYkim
 39t6rodj6rT/oMib4XvW55GjQy5sdXwz+1jE+kZA5imbUvt6YzUXFBzIBOGOIF0n
 1MukKa7M6ragnm2yR+42ucBr3jcuc91/keeVzWgP2cgeZeKUlBHme+rECYnwqDdT
 9rcG4U2XL0Wolbm4lAispaWYIYoOURvPeryJ244vlPmch5/2nmXbG7AgNlfJsAw4
 NFmdHBWxLeyB8F95ToikhuNlTWrsvdVHPHbDaDPwioSulZ1vw+lu4CHRd1uZo2iH
 W0INE65ukgyenzTDbmnj5/oWCqV4KRTs8A2x6eimz+wG/60jWQjDiBLSzhxjBH7x
 alrwhxnW3bD31ZUCkmaGd1+3txvLf+Lup9lLX3GCBKA45dW9pzVCLfxSfNaKKlTL
 0xCYSMxl5xbl8TL6hHxK7/n+LsButgTRWIoJpqkM9uPrljwzznpgqJvARqSuHEKJ
 3Tvnkc2DZsmlM8L02i929BsrsoTncm6wBBVlCJzhL0VNaOuL7yJVzXhrw7b/dZZw
 IZu6cH5RrZhIQR4y1UPlaEZoidUGvR0+K997AsURIHJA0RolWE5eI2JHSE86EX8S
 bzG5SChkQmbpYt5OXQvg5VxvqVElx/5/tamcHe/rKwaAwaG9aI9HICgP2e0Zaoce
 YOMJUpcHtSY5Fedk8P1a
 =tD1x
 -----END PGP SIGNATURE-----

Merge tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - remove sensor drivers that got converted from soc_camera

 - remaining soc_camera drivers got moved to staging

 - some documentation cleanups and improvements

 - the imx staging driver now supports imx7

 - the ov9640, mt9m001 and mt9m111 got converted from soc_camera

 - the vim2m driver now does what a m2m convert driver expects to do

 - epoll() fixes on media subsystems

 - several drivers fixes, typos, cleanups and improvements

* tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits)
  media: dvb/earth-pt1: fix wrong initialization for demod blocks
  media: vim2m: Address some coding style issues
  media: vim2m: don't use BUG()
  media: vim2m: speedup passthrough copy
  media: vim2m: add an horizontal scaler
  media: vim2m: don't accept YUYV anymore as output format
  media: vim2m: add vertical linear scaler
  media: vim2m: better handle cap/out buffers with different sizes
  media: vim2m: use different framesizes for bayer formats
  media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES
  media: vim2m: ensure that width is multiple of two
  media: vim2m: improve debug messages
  media: vim2m: add bayer capture formats
  media: a few more typos at staging, pci, platform, radio and usb
  media: Documentation: fix several typos
  media: staging: fix several typos
  media: include: fix several typos
  media: common: fix several typos
  media: v4l2-core: fix several typos
  media: usb: fix several typos
  ...
2019-03-09 14:45:54 -08:00
Christophe Roullier
8356679990 dt-bindings: net: stmmac: remove syscfg clock property
Syscfg clock is no more needed.

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08 11:48:19 -08:00
Christophe Roullier
830133daec dt-bindings: net: stmmac: add phys config properties
Add properties to support all Phy config
 PHY_MODE	(MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz),
 PHY wo crystal (50Mhz), No 125Mhz from PHY config.

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08 11:48:19 -08:00
Stephen Boyd
fea0b0850a Merge branches 'clk-typo', 'clk-json-schema', 'clk-mtk-2712-eco' and 'clk-rockchip' into clk-next
- Convert a few clk bindings to JSON schema format
 - 3rd ECO fix for Mediatek MT2712 SoCs

* clk-typo:
  clk: samsung: fix typo

* clk-json-schema:
  dt-bindings: clock: Convert fixed-factor-clock to json-schema
  dt-bindings: clock: Convert fixed-clock binding to json-schema

* clk-mtk-2712-eco:
  clk: mediatek: update clock driver of MT2712
  dt-bindings: clock: add clock for MT2712

* clk-rockchip:
  clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclks
  clk: rockchip: fix frac settings of GPLL clock for rk3328
2019-03-08 10:34:22 -08:00
Stephen Boyd
75f486c015 Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and 'clk-SA-fixes' into clk-next
- Updates for qcom MSM8998 GCC clks
 - qcom MSM8998 RPM managed clks
 - Random static analysis fixes for clk drivers

* clk-qcom-msm8998:
  clk: qcom: Make common clk_hw registrations
  clk: qcom: smd: Add support for MSM8998 rpm clocks
  clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998
  clk: qcom: Add missing freq for usb30_master_clk on 8998
  clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks

* clk-fractional-parent:
  clk: fractional-divider: check parent rate only if flag is set

* clk-x86-mv:
  clk: x86: Move clk-lpss.h to platform_data/x86

* clk-SA-fixes:
  clk: mediatek: fix platform_no_drv_owner.cocci warnings
  clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings
  clk: qoriq: Improve an error message
2019-03-08 10:29:15 -08:00
Stephen Boyd
461ea6ab2c Merge branches 'clk-qcom-rpmh', 'clk-gpio-sleep', 'clk-stm32mp1', 'clk-qcom-qcs404' and 'clk-actions-s500' into clk-next
- IPA clk support on Qualcomm RPMh clk controllers
 - Support sleeping gpios in clk-gpio type
 - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
 - Actions Semi S500 SoC clk support

* clk-qcom-rpmh:
  clk: qcom: clk-rpmh: Add IPA clock support

* clk-gpio-sleep:
  clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk

* clk-stm32mp1:
  dt-bindings: clock: remove unused definition for stm32mp1
  clk: stm32mp1: fix bit width of hse_rtc divider
  clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag
  clk: stm32mp1: fix HSI divider flag
  clk: stm32mp1: fix mcu divider table
  clk: stm32mp1: set ck_csi as critical clock
  clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks
  clk: stm32mp1: parent clocks update

* clk-qcom-qcs404:
  clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock
  clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs
  clk: qcom: remove empty lines in clk-rcg.h

* clk-actions-s500:
  clk: actions: Add clock driver for S500 SoC
  dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU
  clk: actions: Add configurable PLL delay
2019-03-08 10:27:52 -08:00
Stephen Boyd
e7faa095cb Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and 'clk-mmp2-lcdc' into clk-next
- Split LCDC into two clks on the Marvell MMP2 SoC

* clk-imx:
  clk: imx8mq: add GPIO clocks to clock tree
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: imx: imx8mm: Mark init function __init
  clk: imx8mq: Add the missing ARM clock
  dt-bindings: imx8mq-clock: Add the missing ARM clock
  clk: imx: imx8mq: Fix the rate propagation for arm pll
  clk: imx8mq: Add support for the CLKO1 clock
  clk: imx8mq: Fix the CLKO2 source select list
  clk: imx8mq: Add missing M4 clocks
  clk: imx: Add clock driver support for imx8mm
  dt-bindings: imx: Add clock binding doc for imx8mm
  clk: imx: Add PLLs driver for imx8mm soc
  clk: imx5: add imx5_SCC2_IPG_GATE
  clk: imx: scu: add set parent support
  clk: imx: scu: add fallback compatible string support
  clk: imx8mq: Make parent names arrays const pointers
  clk: imx: Make parents const pointer in mux wrappers
  clk: imx: Make parent_names const pointer in composite-8m

* clk-samsung:
  clk: samsung: s3c2443: Mark expected switch fall-through
  clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override
  clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure
  clk: samsung: exynos5433: Add selected IMEM clocks
  clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU
  clk: samsung: exynos5433: Fix name typo in sssx
  clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks
  clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs

* clk-ti:
  clk: clk-twl6040: Fix imprecise external abort for pdmclk
  ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that
  clk: ti: check clock type before doing autoidle ops
  clk: ti: add a usecount for autoidle
  clk: ti: generalize the init sequence of clk_hw_omap clocks
  clk: ti: remove usage of CLK_IS_BASIC
  clk: ti: add new API for checking if a provided clock is an OMAP clock
  clk: ti: move clk_hw_omap list handling under generic part of the driver

* clk-uniphier-gear:
  clk: uniphier: Fix update register for CPU-gear

* clk-mmp2-lcdc:
  clk: mmp2: separate LCDC peripheral clk form the display clock
  dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
2019-03-08 10:27:40 -08:00
Stephen Boyd
3f8e7e7247 Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', 'clk-meson' and 'clk-renesas' into clk-next
- Add a {devm_}clk_get_optional() API
 - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups

* clk-optional:
  clk: Add (devm_)clk_get_optional() functions
  clk: Add comment about __of_clk_get_by_name() error values

* clk-devm-clkdev-register:
  clk: clk-st: avoid clkdev lookup leak at remove
  clk: clk-max77686: Clean clkdev lookup leak and use devm
  clkdev: add managed clkdev lookup registration

* clk-allwinner:
  clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it

* clk-meson: (22 commits)
  clk: meson: meson8b: fix the naming of the APB clocks
  dt-bindings: clock: meson8b: add APB clock definition
  clk: meson: Add G12A AO Clock + Reset Controller
  dt-bindings: clk: add G12A AO Clock and Reset Bindings
  clk: meson: factorise meson64 peripheral clock controller drivers
  clk: meson: g12a: add peripheral clock controller
  dt-bindings: clk: meson: add g12a periph clock controller bindings
  clk: meson: pll: update driver for the g12a
  clk: meson: rework and clean drivers dependencies
  clk: meson: axg-audio does not require syscon
  clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory
  clk: export some clk_hw function symbols for module drivers
  clk: meson: ao-clkc: claim clock controller input clocks from DT
  clk: meson: axg: claim clock controller input clock from DT
  clk: meson: gxbb: claim clock controller input clock from DT
  clk: meson: meson8b: add the GPU clock tree
  clk: meson: meson8b: use a separate clock table for Meson8
  clk: meson: axg-ao: add 32k generation subtree
  clk: meson: gxbb-ao: replace cec-32k with the dual divider
  clk: meson: add dual divider clock driver
  ...

* clk-renesas:
  clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK
  clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK
  clk: renesas: r8a774c0: Add TMU clock
  clk: renesas: r8a77980: Add RPC clocks
  clk: renesas: rcar-gen3: Add RPC clocks
  clk: renesas: rcar-gen3: Add spinlock
  clk: renesas: rcar-gen3: Factor out cpg_reg_modify()
  clk: renesas: r8a774c0: Correct parent clock of DU
  clk: renesas: r8a774a1: Add missing CANFD clock
  clk: renesas: r8a774c0: Add missing CANFD clock
2019-03-08 10:27:21 -08:00
Stephen Boyd
7e2570031a Merge branches 'clk-of-refcount', 'clk-mmio-fixed-clock', 'clk-remove-clps', 'clk-socfpga-parent' and 'clk-struct-size' into clk-next
- Various DT of_node refcount fixes
 - Support for fixed rate clks populated from an MMIO register
 - Remove clps711x driver as the board support is gone

* clk-of-refcount:
  clk: dove: fix refcount leak in dove_clk_init()
  clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init()
  clk: armada-xp: fix refcount leak in axp_clk_init()
  clk: kirkwood: fix refcount leak in kirkwood_clk_init()
  clk: armada-370: fix refcount leak in a370_clk_init()
  clk: vf610: fix refcount leak in vf610_clocks_init()
  clk: imx7d: fix refcount leak in imx7d_clocks_init()
  clk: imx6sx: fix refcount leak in imx6sx_clocks_init()
  clk: imx6q: fix refcount leak in imx6q_clocks_init()
  clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()
  clk: socfpga: fix refcount leak
  clk: ti: fix refcount leak in ti_dt_clocks_register()
  clk: qoriq: fix refcount leak in clockgen_init()
  clk: highbank: fix refcount leak in hb_clk_init()

* clk-mmio-fixed-clock:
  clk: Add Fixed MMIO clock driver
  dt-bindings: clk: Add bindings for Fixed MMIO clock

* clk-remove-clps:
  clk: clps711x: Remove board support

* clk-socfpga-parent:
  clk: socfpga: Don't have get_parent for single parent ops

* clk-struct-size:
  clk: imx: imx7ulp: use struct_size() in kzalloc()
2019-03-08 10:26:59 -08:00
Linus Torvalds
3601fe43e8 This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
 
 - The big change this time around is the irqchip handling in
   the qualcomm pin controllers, closely coupled with the
   gpiochip. This rework, in a classic fall-between-the-chairs
   fashion has been sidestepped for too long. The Qualcomm
   IRQchips using the SPMI and SSBI transport mechanisms have
   been rewritten to use hierarchical irqchip. This creates
   the base from which I intend to gradually pull support for
   hierarchical irqchips into the gpiolib irqchip helpers to
   cut down on duplicate code. We have too many hacks in the
   kernel because people have been working around the missing
   hierarchical irqchip for years, and once it was there,
   noone understood it for a while. We are now slowly adapting
   to using it. This is why this pull requests include changes
   to MFD, SPMI, IRQchip core and some ARM Device Trees
   pertaining to the Qualcomm chip family. Since Qualcomm have
   so many chips and such large deployments it is paramount
   that this platform gets this right, and now it (hopefully)
   does.
 
 - Core support for pull-up and pull-down configuration, also
   from the device tree. When a simple GPIO chip support a
   "off or on" pull-up or pull-down resistor, we provide a
   way to set this up using machine descriptors or device tree.
   If more elaborate control of pull up/down (such as
   resistance shunt setting) is required, drivers should be
   phased over to use pin control. We do not yet provide a
   userspace ABI for this pull up-down setting but I suspect
   the makers are going to ask for it soon enough. PCA953x
   is the first user of this new API.
 
 - The GPIO mockup driver has been revamped after some
   discussion improving the IRQ simulator in the process.
   The idea is to make it possible to use the mockup for
   both testing and virtual prototyping, e.g. when you do
   not yet have a GPIO expander to play with but really
   want to get something to develop code around before
   hardware is available. It's neat. The blackbox testing
   usecase is currently making its way into kernelci.
 
 - ACPI GPIO core preserves non direction flags when updating
   flags.
 
 - A new device core helper for devm_platform_ioremap_resource()
   is funneled through the GPIO tree with Greg's ACK.
 
 New drivers:
 
 - TQ-Systems QTMX86 GPIO controllers (using port-mapped
   I/O)
 
 - Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
 
 - AMD G-Series PCH (Platform Controller Hub) GPIO driver.
 
 - Fintek F81804 & F81966 subvariants.
 
 - PCA953x now supports NXP PCAL6416.
 
 Driver improvements:
 
 - IRQ support on the Nintendo Wii (Hollywood) GPIO.
 
 - get_direction() support for the MVEBU driver.
 
 - Set the right output level on SAMA5D2.
 
 - Drop the unused irq trigger setting on the Spreadtrum
   driver.
 
 - Wakeup support for PCA953x.
 
 - A slew of cleanups in the various Intel drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcgoLEAAoJEEEQszewGV1zjBAP/3OmTFGv49PFmJwSx+PlLiYf
 V6/UPaQzq81CGSMtHxbS51TyP9Id7PCfsacbuFYutzn0D1efvl7jrkb8qJ6fVvCM
 bl/i6q8ipRTPzAf1hD3QCgCe3BXCA064/OcPrz987oIvI3bJQXsmBjBSXHWr4Cwa
 WfB5DX/afn9TK3XHhMQGfw5f0d+TtnKAs90RTTVKiz9Ow8eFYZJOhgPkvhCR3Gi9
 YJIzIAiwhHZ7/zauo4JAYFU/O/Z3YEC5zeLne2ItebzNooRkSxdz0c9Hs7HlCZmU
 930Uv9jNN89N3vPqpZzAHtPvwDOmAILMWvKy9xRSp+eoIukarRJgF7ALPk7QWxK1
 yy+tGj4dXBQ6tI8W3wUN1WgjNpii3K1HbJ+1LQVQL2/q9o+3YXXqmjdjuw7C8YYV
 5ystNrUppkgfIIciHL4lhqw3wKJJhVEAns2V245hIitoShT+RvIg8GQbGZmWlQFd
 YsHbynqHL9iwfRNv26kEqZXZOo/4D1t6Scw+OPVyba2Wyttf+qbmg+XaYMqFaxYW
 mfydvdtymeCOUIPJMzw58KGPUTXJ4UPLENyayXNUHokr1a8VO8OIthY7zwi0CpvJ
 IcsAY9zoGxvfbRV922mlIsw3oOBcM2IN2lC9sY469ZVnjBrdC3rsQpIBZr+Vzz8i
 YlUfXLSGSyuUZUz//2eG
 =VoVC
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.1 cycle:

  Core changes:

   - The big change this time around is the irqchip handling in the
     qualcomm pin controllers, closely coupled with the gpiochip. This
     rework, in a classic fall-between-the-chairs fashion has been
     sidestepped for too long.

     The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
     have been rewritten to use hierarchical irqchip. This creates the
     base from which I intend to gradually pull support for hierarchical
     irqchips into the gpiolib irqchip helpers to cut down on duplicate
     code.

     We have too many hacks in the kernel because people have been
     working around the missing hierarchical irqchip for years, and once
     it was there, noone understood it for a while. We are now slowly
     adapting to using it.

     This is why this pull requests include changes to MFD, SPMI,
     IRQchip core and some ARM Device Trees pertaining to the Qualcomm
     chip family. Since Qualcomm have so many chips and such large
     deployments it is paramount that this platform gets this right, and
     now it (hopefully) does.

   - Core support for pull-up and pull-down configuration, also from the
     device tree. When a simple GPIO chip supports an "off or on" pull-up
     or pull-down resistor, we provide a way to set this up using
     machine descriptors or device tree.

     If more elaborate control of pull up/down (such as resistance shunt
     setting) is required, drivers should be phased over to use pin
     control. We do not yet provide a userspace ABI for this pull
     up-down setting but I suspect the makers are going to ask for it
     soon enough. PCA953x is the first user of this new API.

   - The GPIO mockup driver has been revamped after some discussion
     improving the IRQ simulator in the process.

     The idea is to make it possible to use the mockup for both testing
     and virtual prototyping, e.g. when you do not yet have a GPIO
     expander to play with but really want to get something to develop
     code around before hardware is available. It's neat. The blackbox
     testing usecase is currently making its way into kernelci.

   - ACPI GPIO core preserves non direction flags when updating flags.

   - A new device core helper for devm_platform_ioremap_resource() is
     funneled through the GPIO tree with Greg's ACK.

  New drivers:

   - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)

   - Gateworks PLD GPIO driver (vaccumed up from OpenWrt)

   - AMD G-Series PCH (Platform Controller Hub) GPIO driver.

   - Fintek F81804 & F81966 subvariants.

   - PCA953x now supports NXP PCAL6416.

  Driver improvements:

   - IRQ support on the Nintendo Wii (Hollywood) GPIO.

   - get_direction() support for the MVEBU driver.

   - Set the right output level on SAMA5D2.

   - Drop the unused irq trigger setting on the Spreadtrum driver.

   - Wakeup support for PCA953x.

   - A slew of cleanups in the various Intel drivers"

* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
  gpio: gpio-omap: fix level interrupt idling
  gpio: amd-fch: Set proper output level for direction_output
  x86: apuv2: remove unused variable
  gpio: pca953x: Use PCA_LATCH_INT
  platform/x86: fix PCENGINES_APU2 Kconfig warning
  gpio: pca953x: Fix dereference of irq data in shutdown
  gpio: amd-fch: Fix type error found by sparse
  gpio: amd-fch: Drop const from resource
  gpio: mxc: add check to return defer probe if clock tree NOT ready
  gpio: ftgpio: Register per-instance irqchip
  gpio: ixp4xx: Add DT bindings
  x86: pcengines apuv2 gpio/leds/keys platform driver
  gpio: AMD G-Series PCH gpio driver
  drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
  gpio: tqmx86: Set proper output level for direction_output
  gpio: sprd: Change to use SoC compatible string
  gpio: sprd: Use SoC compatible string instead of wildcard string
  gpio: of: Handle both enable-gpio{,s}
  gpio: of: Restrict enable-gpio quirk to regulator-gpio
  gpio: davinci: use devm_platform_ioremap_resource()
  ...
2019-03-08 10:09:53 -08:00
Linus Torvalds
cf2e8c544c - New Drivers
- Add STMPE ADC Input driver
    - Add STMicroelectronics STPMIC1 Parent driver
    - Add STMicroelectronics STPMIC1 OnKey Misc driver
    - Add STMicroelectronics STPMIC1 Watchdog driver
    - Add Cirrus Logic Lochnagar Parent driver
    - Add TQ-Systems TQMX86 Parent driver
 
  - New Device Support
    - Add support for ADC to STMPE
 
  - New (or moved) Functionality
    - Move Lightbar functionality to its own driver; cros_ec_lightbar
    - Move VBC functionality to its own driver; cros_ec_vbc
    - Move VBC functionality to its own driver; cros_ec_vbc
    - Move DebugFS functionality to its own driver; cros_ec_debugfs
    - Move SYSFS functionality to its own driver; cros_ec_sysfs
    - Add support for input voltage options; tps65218
 
  - Fix-ups
    - Use devm_* managed resources; cros_ec
    - Device Tree documentation; stmpe, aspeed-lpc, lochnagar
    - Trivial Clean-ups; stmpe
    - Rip out broken modular code; aat2870-core, adp5520, as3711,
          db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
 	 syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
 	 wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
    - Kconfig fixups; INTEL_SOC_PMIC
    - Improve error path; sm501, sec-core
    - Use struct_size() helper; sm501
    - Constify; at91-usart
    - Use pointers instead of copying data; at91-usart
    - Deliver proper return value; cros_ec_dev
    - Trivial formatting/whitespace; sec-core
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlyA5j4ACgkQUa+KL4f8
 d2EAyw/+N7N77ex5Ryxmyn61SWvgTL221tj+olw6RqC92Vfw6S2ZFP1CsM/E7tZb
 qCLYkkJSgBLKoOCI5OLiXsvWCPjyLU33nG/oS0SSiMJ1Fp9M0h7uRnOtOio3z31i
 w9MJAvEY3RN8I1bRGMO6aWUtT0q3AzHNtdl+7BqAkjjeXiUE0lGd5eARRS1zRWSa
 ki0OzUkJeszPk+6E6N0K+BQZxcL3cBEsR8ZAif903cMEbqsJIv4nmif4b5D63BKH
 PtOLn+6HVMG4bzqRRytVhcO/z2uj2jlLCHH9wBnyd4b7SoLFuz15yN5DhD4bKLt7
 0UMqiBlC2MeaTv3wyKjeNPQtaMY7zJNUpdFly1PHAYR4oy5kbqk2IAv30N/zRfPK
 zLmWWq7DYdazBxSSGKmpGEW63Dkr/MQY2oj4nUlcank/X0K7LvmXv7kIxp9jJhA5
 bE76f77uHneHvq5OTc5CZtaYNqZbE6tO8rqZ2QlfCqa0M8VxbcrYiym0fQFJBdsH
 eFtaTG162ssZq1npV759c4/2E3zQ3EW+rj89/AWp8ViJULQLyPY2nUYddx+w04Se
 kSdgYCvMI5byvF+Tuq/CbUWz7kyca3D+EFiYTkzIfrZr+4yiG2VO8wEO1knkEUVo
 9X/wnAD5hQJePEM8CyPZrnirndB0W6SAvSmRZlF/OAbuCBz1DkQ=
 =tUge
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add STMPE ADC Input driver
   - Add STMicroelectronics STPMIC1 Parent driver
   - Add STMicroelectronics STPMIC1 OnKey Misc driver
   - Add STMicroelectronics STPMIC1 Watchdog driver
   - Add Cirrus Logic Lochnagar Parent driver
   - Add TQ-Systems TQMX86 Parent driver

  New Device Support:
   - Add support for ADC to STMPE

  New (or moved) Functionality:
   - Move Lightbar functionality to its own driver; cros_ec_lightbar
   - Move VBC functionality to its own driver; cros_ec_vbc
   - Move VBC functionality to its own driver; cros_ec_vbc
   - Move DebugFS functionality to its own driver; cros_ec_debugfs
   - Move SYSFS functionality to its own driver; cros_ec_sysfs
   - Add support for input voltage options; tps65218

  Fixes:
   - Use devm_* managed resources; cros_ec
   - Device Tree documentation; stmpe, aspeed-lpc, lochnagar
   - Trivial Clean-ups; stmpe
   - Rip out broken modular code; aat2870-core, adp5520, as3711,
         db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
	 syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
	 wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
   - Kconfig fixups; INTEL_SOC_PMIC
   - Improve error path; sm501, sec-core
   - Use struct_size() helper; sm501
   - Constify; at91-usart
   - Use pointers instead of copying data; at91-usart
   - Deliver proper return value; cros_ec_dev
   - Trivial formatting/whitespace; sec-core"

* tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
  mfd: mxs-lradc: Mark expected switch fall-through
  mfd: sec-core: Cleanup formatting to a consistent style
  mfd: tqmx86: IO controller with I2C, Wachdog and GPIO
  mfd: intel-lpss: Move linux/pm.h to the local header
  mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM
  mfd: tps68470: Drop unused MODULE_DEVICE_TABLE
  mfd: at91-usart: No need to copy mfd_cell in probe
  mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev
  mfd: lochnagar: Add support for the Cirrus Logic Lochnagar
  mfd: lochnagar: Add initial binding documentation
  dt-bindings: mfd: aspeed-lpc: Make parameter optional
  mfd: sec-core: Return gracefully instead of BUG() if device cannot match
  mfd: sm501: Use struct_size() in devm_kzalloc()
  mfd: sm501: Fix potential NULL pointer dereference
  mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies
  mfd: tps65218.c: Add input voltage options
  mfd: wm8400-core: Make it explicitly non-modular
  mfd: wm8350-core: Drop unused module infrastructure from non-modular code
  mfd: wm8350-i2c: Make it explicitly non-modular
  mfd: wm831x-core: Drop unused module infrastructure from non-modular code
  ...
2019-03-08 10:02:58 -08:00
Linus Torvalds
f8d35403eb RTC for 5.0
Subsystem:
  - new quartz-load-femtofarads DT property for quartz load capacitance
  - remove rtc_class_ops.read_callback
 
 New drivers:
  - Abracon AB-RTCMC-32.768kHz-EOZ9
  - Amlogic Meson RTC
  - Cadence RTC IP
  - Microcrystal RV3028
  - Whwave sd3078
 
 Drivers:
  - cmos: ignore bogus century byte
  - ds1307: rework rx8130 support
  - isl1208: add isl1209 support, nvmem support
  - rs5C372: report invalid time when the oscillator stopped
  - rx8581: add rx8571 support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlyATtkACgkQAyWl4gNJ
 NJIEOA//eZgauZj9tft1lTCfHDRQoxpcGzmTrLOX3W/s3n6SQgd31YQmTrsoBRbB
 kjP/qOuSLiZi6bmwBWkLN7fU/eUa433iqxbNpA8tAo0TzrCkm/YBln5ozVmonQ+F
 Vm4n5NKlTCJSb55Gzil+oEj1/Ly8d10IBLslhuZl23BEPmGCRm4E5SoiwdyAGzX2
 APth4X88BtwzmNNjvP6BgoW19aDQDyugHK6xP8vTa2rv34pPrhuBARbBP8WQDkM+
 NVqimUH/+i+uj7U5HEKClL0acG20KKNorz3BQeKUFUrwWHFq3IfdkRMBXRAH8OKl
 gmyktZJmgROdCywD27mW5dmm+kCqVyB8NoxRidADZWPuuITzlZSM6zLOt5mrmKhX
 WMCWBk1Ol3gJNbIcX4GXrEytiZLeFGonk5FMRTX2U7wWGCA1bZxJPkTgwLUIzUZE
 PX5G8SIs/3YkL2/0FeRAS16oK1EI1XXUOenVXfdwJqeMeQ8wSGIh9Sp3XDe0v6EZ
 mtcCTQFi1EJWcVBERUOo7iRoSGbohQWmQeO01J8aUkj7SpTG429csESOeBGYRS24
 FEtiPG2DPz1sj0gLQ2yp1H8h4mdtn4uODbewN/TRXIqB9Th6UvR8UbfB9v/qJozY
 KyCpONuHctGd0CLXa0Gb09t8qxht9wT1ixajTqirsVce5l2WGDU=
 =/Noj
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "There is an unusual amount of new drivers this cycle, and this
  explains the number of insertions.

  Other than that, the changes are the usual fixes and feature addition.

  Subsystem updates:
   - new quartz-load-femtofarads DT property for quartz load capacitance
   - remove rtc_class_ops.read_callback

  New drivers:
   - Abracon AB-RTCMC-32.768kHz-EOZ9
   - Amlogic Meson RTC
   - Cadence RTC IP
   - Microcrystal RV3028
   - Whwave sd3078

  Driver updates:
   - cmos: ignore bogus century byte
   - ds1307: rework rx8130 support
   - isl1208: add isl1209 support, nvmem support
   - rs5C372: report invalid time when the oscillator stopped
   - rx8581: add rx8571 support"

* tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (66 commits)
  rtc: pic32: convert to SPDX identifier
  rtc: pic32: let the core handle range
  rtc: pic32: convert to devm_rtc_allocate_device
  rtc: update my email address
  rtc: rv8803: convert to SPDX identifier
  rtc: rv8803: let the core handle range
  rtc: tx4939: convert to SPDX identifier
  rtc: tx4939: use .set_time
  rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: tx4939: set range
  rtc: tx4939: remove useless test
  rtc: zynqmp: let the core handle range
  rtc: zynqmp: fix possible race condition
  rtc: imx-sc: use rtc_time64_to_tm
  rtc: rx8581: Add support for Epson rx8571 RTC
  dt-bindings: rtc: add rx8571 compatible
  rtc: pcf85063: remove dead code
  rtc: remove rtc_class_ops.read_callback
  rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
  dt-bindings: rtc: add ABEOZ9
  ...
2019-03-08 09:54:55 -08:00
Linus Torvalds
9f24a81e2e Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal soc updates from Eduardo Valentin:
 "Specifics:

   - mediatek thermal now supports MT8183

   - broadcom thermal now supports Stingray

   - qoirq now supports multiple sensors

   - fixes on different drivers: rcar, tsens, tegra

  Some new drivers are still pending further review and I chose to leave
  them for the next merge window while still sending this material"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: rcar_gen3_thermal: Register hwmon sysfs interface
  thermal/qcom/tsens-common : fix possible object reference leak
  thermal: tegra: add get_trend ops
  thermal: tegra: fix memory allocation
  thermal: tegra: remove unnecessary warnings
  thermal: mediatek: add support for MT8183
  dt-bindings: thermal: add binding document for mt8183 thermal controller
  thermal: mediatek: add flag for bank selection
  thermal: mediatek: add thermal controller offset
  thermal: mediatek: add calibration item
  thermal: mediatek: add common index of vts settings.
  thermal: mediatek: fix register index error
  thermal: qoriq: add multiple sensors support
  thermal: broadcom: Add Stingray thermal driver
  dt-bindings: thermal: Add binding document for SR thermal
2019-03-08 09:52:41 -08:00
Linus Torvalds
6c3f98fadd Merge branch 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:

 - the I2C core gained helpers to assist drivers in handling their
   suspended state, and drivers were converted to use it

 - two new fault-injectors for stress-testing

 - bigger refactoring and feature improvements for the ocores,
   sh_mobile, and tegra drivers

 - platform_data removal for the at24 EEPROM driver

 - ... and various improvements and bugfixes all over the subsystem

* 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
  i2c: Allow recovery of the initial IRQ by an I2C client device.
  i2c: ocores: turn incomplete kdoc into a comment
  i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  i2c: tegra: Only display error messages if DMA setup fails
  i2c: gpio: fault-injector: add 'inject_panic' injector
  i2c: gpio: fault-injector: add 'lose_arbitration' injector
  i2c: tegra: remove multi-master support
  i2c: tegra: remove master fifo support on tegra186
  i2c: tegra: change phrasing, "fallbacking" to "falling back"
  i2c: expand minor range when registering chrdev region
  i2c: aspeed: Add multi-master use case support
  i2c: core-smbus: don't trace smbus_reply data on errors
  i2c: ocores: Add support for bus clock via platform data
  i2c: ocores: Add support for IO mapper registers.
  i2c: ocores: checkpatch fixes
  i2c: ocores: add SPDX tag
  i2c: ocores: add polling interface
  i2c: ocores: do not handle IRQ if IF is not set
  i2c: ocores: stop transfer on timeout
  i2c: tegra: add i2c interface timing support
  ...
2019-03-08 09:27:33 -08:00