As a relatively new ABI, N64 only had getdents syscall while other modern
architectures have getdents64.
This was noticed when Python 3.3 shifted to the latter one for aarch64.
[ralf@linux-mips.org: The history of getdents64 is a little complicated.
Commit 1a1d77dd589de5a567fa95e36aa6999c704ceca4 [Merge with 2.4.0-test7.]
added N64 getdents(2) to arch/mips64/kernel/scall_64.S as syscall 5213,
then dropped again in 578720675c44e54e8aa7c68f6dce59ed37ce3d3b [Overhaul
of the 64-bit syscall interface. Now heritage free.] for 2.5.18 in 2002.]
Signed-off-by: Aron Xu <aron@debian.org>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5285/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
- As suggested by Gleb, wrap calls to gfn_to_pfn() with srcu_read_lock/unlock().
Memory slots should be acccessed from a SRCU read section.
- kvm_mips_map_page() now returns an error code to it's callers, instead of
calling panic() if it cannot find a mapping for a particular gfn.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This patch updates the marzen board code as if USB PHY isn't enabled
they phy will have a value set by ERR_PTR() rather than be NULL.
Without this patch a NULL pointer dereference and kernel panic
occurs on initialisation of USB on marzen.
This resolves a regression introduced in 3.10-rc1 by
b7fa5c2aec
("usb: phy: return -ENXIO when PHY layer isn't enabled").
Tested-by: Nguyen Hong Ky <nh-ky@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
local_irq_enable() may expand into very different code, so it rather should
stay in C. Also this keeps the assembler code size constant which keeps
the rollback code simple. So it's best to split r4k_wait into two parts,
one C and one assembler.
Finally add the local_irq_enable() to r4k_wait to ensure the WAIT
instruction in __r4k_wait() will work properly.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull s390 update from Martin Schwidefsky:
"An additional sysfs attribute for channel paths and a couple of bux
fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pgtable: fix ipte notify bit
s390/xpram: mark xpram as non-rotational
s390/smp: fix cpu re-scan vs. cpu state
s390/cio: add channel ID sysfs attribute
s390/ftrace: fix mcount adjustment
s390: fix gmap_ipte_notifier vs. software dirty pages
s390: disable pfmf for clear page instruction
s390/disassembler: prevent endless loop in print_fn_code()
s390: remove non existent reference to GENERIC_KERNEL_THREAD
Before f7b861b7a6 ("arm: Use generic idle loop") ARM would kill the
CPU within the rcu idle section. Now that the rcu_idle_enter()/exit()
pair have been pushed lower down in the idle loop this is no longer true
and so using RCU_NONIDLE here is no longer necessary and also harmful
because RCU is not actually idle at this point.
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The AK8975 Kconfig option was renamed during the 3.10 merge window.
Adjust tegra_defconfig to enable the new name, so it's not missing
useful features.
Tegra DRM support used to be enabled in the default Tegra configuration,
but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default.
Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
[swarren, squashed Alex's and my changes together]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The assignment of IRQ for the SMC91x ethernet adapter had two
problems making it non-working:
- It was not put into the ethernet device node. Let's do this
by using the board-specific overlay, so we can make other
overlays on other Nomadik boards.
- The IRQ number was actually completely wrong, this was the
number for NHK8815, not S8815.
After this ethernet starts working on the USB S8815.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fixes up the debug UART
- Fix dangerous platform data double-assignment
- Fix auxdata for the ethernet device
- Select REGULATOR to satisfy Kconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=uq56
-----END PGP SIGNATURE-----
Merge tag 'ux500-arm-soc-v3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes
From Linus Walleij, some ux500 fixes for the v3.10-rc series:
- Fixes up the debug UART
- Fix dangerous platform data double-assignment
- Fix auxdata for the ethernet device
- Select REGULATOR to satisfy Kconfig
* tag 'ux500-arm-soc-v3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: select REGULATOR
ARM: ux500: Provide device enumeration number suffix for SMSC911x
ARM: ux500: Fix incorrect DEBUG UART virtual addresses
ARM: ux500: Remove duplicated assignment of ab8500_platdata
Signed-off-by: Olof Johansson <olof@lixom.net>
* A few imx6 clock fixes. Nothing is extremely important, but since
we're still in early -rc, I send them for 3.10 inclusion.
* Having bootloader handle ARM errata, we will need to replicate the
diagnostic register of boot cpu into secondary cores, since
bootloader only sets up boot cpu. Otherwise, errata workaround simply
does not work.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRkfdQAAoJEFBXWFqHsHzOOvoIAI5hte/C9p9H+aH0qAb7cE3d
5dhALwu72mUpoMgwH0tBA5eVcmqPJXwQSDJFigG5iqs6RLf7VOsGkWdd5mPZEn6i
l4yqJ9ox4GmAo4WioQiiGCWzITfGbHqjd4ClfXtDmpThGvvrGquH/K9SxKtc4Jc+
Oa61dmOLgPc6XP78Q1zXB7rk9fcg1eL7IZQ+gTMEyDTPeJw2a5ILd/gwp8CffDkI
VlMyWXrSu7ZZdmy6kaAlWZ9TouIi8aBedBnuuvD+k88Doua7Ar4PZ03dc2QOPwKb
TRIKeOtvelWI3M8jJKQrhS/weQJqgsFvT3AgTZHSFHtaKioLfnaYLJf8puMpswM=
=4IPh
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
From Shawn Guo, imx fixes for 3.10:
- A few imx6 clock fixes. Nothing is extremely important, but since
we're still in early -rc, I send them for 3.10 inclusion.
- Having bootloader handle ARM errata, we will need to replicate the
diagnostic register of boot cpu into secondary cores, since
bootloader only sets up boot cpu. Otherwise, errata workaround simply
does not work.
* tag 'imx-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx: fix typo in gpu3d_shader_sels
ARM: imx: replicate the diagnostic register of boot cpu into secondary cores
ARM i.MX6: correct MLB clock configuration
ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
From Jason Cooper, mvebu fixes for v3.10 (round 2):
- mvebu (and orion SoCs)
- remove init_dma_coherent_pool_size()
- mvebu
- fix ranges DT property
- fix DT reg value for L2 cache
- select ARCH_REQUIRE_GPIOLIB
- orion legacy
- fix num_resources and id for ge10 and ge11
* tag 'fixes-3.10-2' of git://git.infradead.org/users/jcooper/linux:
ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node
ARM: plat-orion: Fix num_resources and id for ge10 and ge11
arm: mvebu: fix the 'ranges' property to handle PCIe
ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform
ARM: mvebu: Fix ranges entry on XP GP board
ARM: Orion: Remove redundant init_dma_coherent_pool_size()
Signed-off-by: Olof Johansson <olof@lixom.net>
- a section mismatch fix for hwmod
- boot fix for omap2plus_defconfig for omap2
- musb interrupt fix when using device tree
- am33xx clock fix that I missed earlier somehow
- omap1 dma return code error fix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=qO9y
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.10-rc1/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren, fixes for omaps:
- a section mismatch fix for hwmod
- boot fix for omap2plus_defconfig for omap2
- musb interrupt fix when using device tree
- am33xx clock fix that I missed earlier somehow
- omap1 dma return code error fix
* tag 'omap-for-v3.10-rc1/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to omap2plus_defconfig
ARM: OMAP: fix error return code in omap1_system_dma_init()
ARM: OMAP: fix __init section mismatch for _enable_preprogram
ARM: dts: Fix musb interrupt for device tree booting
Signed-off-by: Olof Johansson <olof@lixom.net>
When I tried booting a stih415 Dual core A9 with multi_v7_defconfig, it
failed to boot. The issues seems to be changing by enabling or disabling
VT8550 platform. Having a quick look at dt_compat list, it seems to miss
a NULL terminator, which means of_flat_dt_match will compat check will
cross the boundary of dt_compat and fault at some point , which is what
was happening in my case.
Without this patch if we try to boot multi_v7_defconfig you might notice
that some of the platforms might fault if they fall after vt8500 in
machine-desc list. Other platforms which fall before vt8500 in mdesc list
will not fault.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Olof Johansson <olof@lixom.net>
From Nicolas Ferre:
An important revert on at91rm9200 platform related
to timers that prevented the platform to boot properly.
Then one pinctrl adjustments for SPI CS and a couple of
trivial typos.
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91: rm9200 fix time support
ARM: at91: dts: request only spi cs-gpios used on sama5d3x cpu module
ARM: at91/trivial: typo in GEM compatible string
ARM: at91/trivial: fix model name for SAM9X25-EK
Signed-off-by: Olof Johansson <olof@lixom.net>
- mvebu
- duplicate alias removal
- augment new internal-regs dt node with proper ranges node
- kirkwood
- stable fix for QNAP TS-11x/TS-21x enabling PCIe port 1
- plat-orion
- missing ehci include in common.h. needed within common.h.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRkRSIAAoJEAi3KVZQDZAemuwH+weyabb2kl3203svdG2E6pRF
h2Znj97zpZTgMLi96Onn7cN6A6xTCix4CCbjV91RhZWvWFkyw2/G73SZioo4tH7R
Z2qgAfpk1OHF6XPiM2EeecG2ZdIbr9zoQtQHFRclRk+K7vvBa+osmuFZ6mleq5Hj
ssLPP6oG/5gx58r0mbgIV6nrErGmN5VD3JJr/KnqQbMxZpD1/7EBlmwyD/ik7Fi7
rnynDNZp7+LK72O1faSdUqij+YsuXE9uoZkN5Vd77ZKtxC+iHuhpJP1RPoyoy+pN
Wr0k+3XV5Nmmp72Uq5vJqHwqblvhE1ylui5LqjLnyx+Yyxurl4zrPWJIXAQBnn0=
=3wrv
-----END PGP SIGNATURE-----
Merge tag 'fixes-3.10-1' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper, mvebu fixes for v3.10:
- mvebu
- duplicate alias removal
- augment new internal-regs dt node with proper ranges node
- kirkwood
- stable fix for QNAP TS-11x/TS-21x enabling PCIe port 1
- plat-orion
- missing ehci include in common.h. needed within common.h.
* tag 'fixes-3.10-1' of git://git.infradead.org/users/jcooper/linux:
ARM: mvebu: Add a ranges entry to translate devbus childs
ARM: plat-orion: add missing ehci include to common.h
Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x
ARM: mvebu: do not duplicate the mpic alias
Signed-off-by: Olof Johansson <olof@lixom.net>
In commit 78d77df715 ("x86-64, init: Do not set NX bits on non-NX
capable hardware") we added the early_pmd_flags that gets the NX bit set
when a CPU supports NX. However, the new variable was marked __initdata,
because the main _use_ of this is in an __init routine.
However, the bit setting happens from secondary_startup_64(), which is
called not only at bootup, but on every secondary CPU start. Including
resuming from STR and at CPU hotplug time. So the value cannot be
__initdata.
Reported-bisected-and-tested-by: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org # v3.9
Acked-by: Peter Anvin <hpa@linux.intel.com>
Cc: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During the conversion to the internal-regs' subnode, the L2-cache node
haven not been converted (due to a wrong choice made by myself during
the resolution of the merge conflict when I rebased the commit). This
leads to wrong address for L2 cache which prevent it to be used on
Armada 370. This commit fix the address reg of the e L2-cache node.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
When platform data were moved from arch/arm/mach-mv78xx0/common.c to
arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion:
Consolidate ethernet platform data", there were few typo made on
gigabit Ethernet interface ge10 and ge11. This commit writes back
their initial value, which allows to use this interfaces again.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: <stable@vger.kernel.org> # v3.0.x
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
With the OMAP serial driver sysc cleanup patches in this series, we can
now remove the hwmod external apis for sysc fiddling.
While at this, also remove unused sysc auto idle api from hwmod code.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
UART IP idle handling now taken care by runtime pm backend(hwmod) indirectly
and OMAP serial driver is also cleaned up accordingly.
So remove the un-used slave idle platforms hooks now.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
OMAP UART IP needs software control for slave idle modes based on functional
state of the IP. i.e The IP slave idle settings should be set to 'noidle' when
being used and then put back to 'smart_idle' when unused. Currently this is
handled by the driver with function pointers implemented in platform code.
This however breaks in case of device tree because of missing idle handling
APIs.
Previous patches in this series added a flag HWMOD_SWSUP_SIDLE_ACTIVE which
takes care of the mentioned requirement. Hence add the flag for all UART IPs
to take advantage of feature supported by framework.
Subsequent patches removes the slave idle handling from driver code.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Some IPs (like UART) need the sidle mode to be controlled in SW only
while they are active. Once they go inactive, they need the IP to be
put back in HW control so they are also wakeup capable.
The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle
mode to be *always* controlled in SWSUP. We now have a need to control
IPs sidle mode in SWSUP only while its active.
So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework
know about these new IP requirements.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
_enable_sysc() and _idle_sysc() handle the midle mode programming correctly
and program HWMOD_IDLEMODE_SMART or HWMOD_IDLEMODE_SMART_WKUP respectively
for supported IPs (The ones which support hardware controlled midle modes)
However the same programming logic is missing when it comes to sidle mode
programming. Here they seem to just set HWMOD_IDLEMODE_SMART (Again for the
ones which support hardware controlled sidle modes)
This problem was hidden due to the fact that a call to _enable_wakeup()
in those same functions would overwrite the idlemodes and program them
correctly (to HWMOD_IDLEMODE_SMART_WKUP in the supported cases)
So fix the sidlemode handling correctly in these functions and handle the
_enable_wakeup() for SIDLEMODE supported IPs same as the way its handled
for MIDLEMODE supported ones.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Since 82a682676 ('ARM: dts: mvebu: Convert all the mvebu files to use
the range property') all the device nodes of Armada 370/XP are under a
common 'ranges' property that translates the device register addresses
into their absolute address, thanks to the base address of the
internal register space.
However, beyond just the register areas, there are also PCIe I/O and
memory regions, whose addresses should be properly translated. This
patch fixes the Armada 370 and XP ranges property to take PCIe into
account properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Initially ARCH_REQUIRE_GPIOLIB was part of Thomas Petazzoni series
when he introduced the gpiolib support for mvebu:
93a59cf arm: mvebu: use GPIO support now that a driver is available
This commit was written to be applied for the ARCH_MVEBU which was
located in arch/arm/KConfig and was merged in 3.7.
In the same time Rob Herring moved the ARCH_MVEBU block to
arch/arm/mach-mvebu/Kconfig with this commit and also merged in 3.7:
387798b ARM: initial multiplatform support
Unfortunately the ARCH_REQUIRE_GPIOLIB have been lost during this
migration. This was not noticed until the v3.10-rc1, because mvebu as
part of ARCH_MULTIPLATFORM was always selected with ARCH_VEXPRESS, and
this architect selected ARCH_REQUIRE_GPIOLIB.
Since the following commit from Arnd: "883a106 ARM: default machine
descriptor for multiplatform", ARCH_VEXPRESS was then no more selected
by default with ARCH_MVEBU and it made appeared the lack of
ARCH_REQUIRE_GPIOLIB for mvebu. This commit added back the selection
of ARCH_REQUIRE_GPIOLIB for ARCH_MVEBU.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This fixes:
MODPOST 393 modules
ERROR: "min_low_pfn" [arch/mips/kvm/kvm.ko] undefined!
make[3]: *** [__modpost] Error 1
It would have been possible to just export min_low_pfn but in the end
pfn_valid should return 1 for any pfn argument for which a struct page
exists so using min_low_pfn was wrong anyway.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull devm usage cleanup from Wolfram Sang:
"Lately, I have been experimenting how to improve the devm interface to
make writing device drivers easier and less error prone while also
getting rid of its subtle issues. I think it has more potential but
still needs work and definately conistency, especiall in its usage.
The first thing I come up with is a low hanging fruit regarding
devm_ioremap_resouce(). This function already checks if the passed
resource is valid and gives an error message if not. So, we can
remove similar checks from the drivers and get rid of a bit of code
and a number of inconsistent error strings.
This series only removes the unneeded check iff devm_ioremap_resource
follows platform_get_resource directly. The previous version tried to
shuffle code if needed, too, what lead to an embarrasing bug. It
turned out to me that shuffling code for all cases found will make the
automated script too complex, so I am unsure if an automated cleanup
is the proper tool for this case. Removing the easy stuff seems
worthwhile to me, though.
Despite various architectures and platform dependencies, I managed to
compile test 45 out of 57 modified files locally using heuristics and
defconfigs."
Pulled because: 296 deletions, 0 additions.
* 'devm_no_resource_check' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits)
sound/soc/kirkwood: don't check resource with devm_ioremap_resource
sound/soc/fsl: don't check resource with devm_ioremap_resource
arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource
arch/arm/plat-samsung: don't check resource with devm_ioremap_resource
arch/arm/mach-tegra: don't check resource with devm_ioremap_resource
drivers/watchdog: don't check resource with devm_ioremap_resource
drivers/w1/masters: don't check resource with devm_ioremap_resource
drivers/video/omap2/dss: don't check resource with devm_ioremap_resource
drivers/video/omap2: don't check resource with devm_ioremap_resource
drivers/usb/phy: don't check resource with devm_ioremap_resource
drivers/usb/host: don't check resource with devm_ioremap_resource
drivers/usb/gadget: don't check resource with devm_ioremap_resource
drivers/usb/chipidea: don't check resource with devm_ioremap_resource
drivers/thermal: don't check resource with devm_ioremap_resource
drivers/staging/nvec: don't check resource with devm_ioremap_resource
drivers/staging/dwc2: don't check resource with devm_ioremap_resource
drivers/spi: don't check resource with devm_ioremap_resource
drivers/rtc: don't check resource with devm_ioremap_resource
drivers/pwm: don't check resource with devm_ioremap_resource
drivers/pinctrl: don't check resource with devm_ioremap_resource
...
Pull MIPS fixes from Ralf Baechle:
"Patching up across the field. The reversion of the two ASID patches
is particularly important as it was breaking many platforms."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: ralink: use the dwc2 driver for the rt305x USB controller
MIPS: Extract schedule_mfi info from __schedule
MIPS: Fix sibling call handling in get_frame_info
MIPS: MSP71xx: remove inline marking of EXPORT_SYMBOL functions
MIPS: Make virt_to_phys() work for all unmapped addresses.
MIPS: Fix build error for crash_dump.c in 3.10-rc1
MIPS: Xway: Fix clk leak
Revert "MIPS: Allow ASID size to be determined at boot time."
Revert "MIPS: microMIPS: Support dynamic ASID sizing."
include, __flush_dcache_all() set/way computing, debug (locking, bit
testing). The of_platform_populate() was moved to an arch_init_call() to
allow subsys_init_call() drivers to probe the DT.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=Ewl8
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 fixes from Catalin Marinas:
"Fixes for duplicate definition of early_console, kernel/time/Kconfig
include, __flush_dcache_all() set/way computing, debug (locking, bit
testing). The of_platform_populate() was moved to an arch_init_call()
to allow subsys_init_call() drivers to probe the DT."
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: debug: fix mdscr.ss check when enabling debug exceptions
arm64: Do not source kernel/time/Kconfig explicitly
arm64: mm: Fix operands of clz in __flush_dcache_all
arm64: Invoke the of_platform_populate() at arch_initcall() level
arm64: debug: clear mdscr_el1 instead of taking the OS lock
arm64: Fix duplicate definition of early_console
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: John Crispin <blogic@openwrt.org>
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
This sets up the devicetree file for the rt3050 chip series and rt3052
eval board to use the right compatible string for the dwc2 driver.
Acked-by: John Crispin <blogic@openwrt.org>
Cc: blogic@openwrt.org
Cc: linux-mips@linux-mips.org
Cc: Matthijs Kooijman <matthijs@stdin.nl>
Patchwork: https://patchwork.linux-mips.org/patch/5226/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
schedule_mfi is supposed to be extracted from schedule(), and
is used in thread_saved_pc and get_wchan.
But, after optimization, schedule() is reduced to a sibling
call to __schedule(), and no real frame info can be extracted.
One solution is to compile schedule() with -fno-omit-frame-pointer
and -fno-optimize-sibling-calls, but that will incur performance
degradation.
Another solution is to extract info from the real scheduler,
__schedule, and this is the approache adopted here.
This patch reads the __schedule address by either following
the 'j' call in schedule if KALLSYMS is disabled or by using
kallsyms_lookup_name to lookup __schedule if KALLSYMS is
available, then, extracts schedule_mfi from __schedule frame info.
This patch also fixes the "Can't analyze schedule() prologue"
warning at boot time.
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5237/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Given a function, get_frame_info() analyzes its instructions
to figure out frame size and return address. get_frame_info()
works as follows:
1. analyze up to 128 instructions if the function size is unknown
2. search for 'addiu/daddiu sp,sp,-immed' for frame size
3. search for 'sw ra,offset(sp)' for return address
4. end search when it sees jr/jal/jalr
This leads to an issue when the given function is a sibling
call, example shown as follows.
801ca110 <schedule>:
801ca110: 8f820000 lw v0,0(gp)
801ca114: 8c420000 lw v0,0(v0)
801ca118: 080726f0 j 801c9bc0 <__schedule>
801ca11c: 00000000 nop
801ca120 <io_schedule>:
801ca120: 27bdffe8 addiu sp,sp,-24
801ca124: 3c028022 lui v0,0x8022
801ca128: afbf0014 sw ra,20(sp)
In this case, get_frame_info() cannot properly detect schedule's
frame info, and eventually returns io_schedule's instead.
This patch adds 'j' to the end search condition to workaround
sibling call cases.
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5236/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
As reported:
This problem was discovered when doing BGP traffic with the TCP MD5 option
activated, where the following call chain caused a crash:
* tcp_v4_rcv
* tcp_v4_timewait_ack
* tcp_v4_send_ack -> follow stack variable rep.th
* tcp_v4_md5_hash_hdr
* tcp_md5_hash_header
* sg_init_one
* sg_set_buf
* virt_to_page
I noticed that tcp_v4_send_reset uses a similar stack variable and
also calls tcp_v4_md5_hash_hdr, so it has the same problem.
The networking core can indirectly call virt_to_phys() on stack
addresses, if this is done from PID 0, the stack will usually be in
CKSEG0, so virt_to_phys() needs to work there as well
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Jiang Liu <liuj97@gmail.com>
Cc: eunb.song@samsung.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5220/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch fixes crash_dump.c build error. Build error logs are as follow.
arch/mips/kernel/crash_dump.c: In function 'kdump_buf_page_init':
arch/mips/kernel/crash_dump.c:67: error: implicit declaration of function 'kmalloc'
arch/mips/kernel/crash_dump.c:67: error: assignment makes pointer from integer without a cast
Signed-off-by: EunBong Song <eunb.song@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5238/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When we take an exception at EL1, we only want to enable debug
exceptions if we're not currently stepping, otherwise we can easily get
stuck in a loop stepping into interrupt handlers.
Unfortunately, the current code tests the wrong bit in the mdscr, so fix
that.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It is required to enable respective clock-domain before
enabling any clock/module inside that clock-domain.
During common-clock migration, .clkdm_name field got missed
for "clkdiv32k_ick" clock, which leaves "clk_24mhz_clkdm"
unused; so it will be disabled even if childs of this clock-domain
is enabled, which keeps child modules in idle mode.
This fixes the kernel crash observed on AM335xEVM-SK platform,
where clkdiv32_ick clock is being used as a gpio debounce clock
and since clkdiv32k_ick is in idle mode it leads to below crash -
Crash Log:
==========
[ 2.598347] Unhandled fault: external abort on non-linefetch (0x1028) at
0xfa1ac150
[ 2.606434] Internal error: : 1028 [#1] SMP ARM
[ 2.611207] Modules linked in:
[ 2.614449] CPU: 0 Not tainted (3.8.4-01382-g1f449cd-dirty #4)
[ 2.620973] PC is at _set_gpio_debounce+0x60/0x104
[ 2.626025] LR is at clk_enable+0x30/0x3c
Cc: stable@vger.kernel.org # v3.9
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
With the latest device tree reorganization which introduced the
'internal-reg' node, now the only region translated is the internal register's.
This makes the description of the hardware incomplete, for it lacks the
Device Bus childs address space.
In order to fix this, it's required to add a 'ranges' entry with a suitable
address space to map Device Bus childs, on a per-board basis.
This patch fixes the ranges property on the Armada XP GP board.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The cpu-info array starts with a list of cpus in configured state,
followed by the cpus in standby state. The comparison to decide which
state a cpu has is incorrect, this causes configured cpus appear as
standby cpus. The correct comparison is the index of the new cpu in
the cpu-info array vs. the number of configured cpus.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This reverts commit d532f3d267.
The original commit has several problems:
1) Doesn't work with 64-bit kernels.
2) Calls TLBMISS_HANDLER_SETUP() before the code is generated.
3) Calls TLBMISS_HANDLER_SETUP() twice in per_cpu_trap_init() when
only one call is needed.
[ralf@linux-mips.org: Also revert the bits of the ASID patch which were
hidden in the KVM merge.]
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: "Steven J. Hill" <Steven.Hill@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5242/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
omap2plus_defconfig is missing CONFIG_ARCH_MULTI_V6. This results in
undefined instruction traps in u-boot (and boot failures) on OMAP2xxx
SoCs, which are ARM11-based. Fix by setting CONFIG_ARCH_MULTI_V6.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix to return -ENOMEM in the d->chan alloc error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit ad871c10 (ARM: dts: OMAP: Add usb_otg and glue data to
OMAP3+ boards) added support for MUSB on omap3 for device tree,
but added the interrupts the wrong way probably as they were
copied from the omap4.dtsi file. On omap3 we have TI specific
interrupt controller, not GIC.
Fix this by specifying the interrupt following the TI INTC
binding.
Without this fix MUSB won't work as it is trying to use
irq0 instead of irq92.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull x86 fixes from Thomas Gleixner:
- Fix for a CPU hot-add deadlock in microcode update code
- Fix for idle consolidation fallout
- Documentation update for initial kernel direct mapping
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Add missing comments for initial kernel direct mapping
x86/microcode: Add local mutex to fix physical CPU hot-add deadlock
x86: Fix idle consolidation fallout
Pull timer fixes from Thomas Gleixner:
- Cure for not using zalloc in the first place, which leads to random
crashes with CPUMASK_OFF_STACK.
- Revert a user space visible change which broke udev
- Add a missing cpu_online early return introduced by the new full
dyntick conversions
- Plug a long standing race in the timer wheel cpu hotplug code.
Sigh...
- Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu
up.
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons
timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE
tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline
tick: Cleanup NOHZ per cpu data on cpu down
tick: Use zalloc_cpumask_var for allocating offstack cpumasks
Pull core fixes from Thomas Gleixner:
- Two fixlets for the fallout of the generic idle task conversion
- Documentation update
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu/idle: Wrap cpu-idle poll mode within rcu_idle_enter/exit
idle: Fix hlt/nohlt command-line handling in new generic idle
kthread: Document ways of reducing OS jitter due to per-CPU kthreads
Pull ARM fixes from Russell King:
"A small number of fixes for stuff from the last merge window, and in
one case (IRQ time accounting) the previous merge window."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value
ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge
ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked
ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile
ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4
ARM: finally enable IRQ time accounting config
Commit 84ebc10294 (USB: remove
CONFIG_USB_SUSPEND option) failed to remove all of the usages of
USB_SUSPEND throughout the kernel. This patch (as1677) removes the
remaining instances of that symbol.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MACH_MOP500 selects REGULATOR_FIXED_VOLTAGE but not REGULATOR. This
patch makes it select the latter too.
Seen as:
warning: (MACH_DOVE_DT && ARCH_KIRKWOOD_DT && MACH_AMS_DELTA &&
MACH_MOP500 && TPS6105X) selects REGULATOR_FIXED_VOLTAGE which has
unmet direct dependencies (REGULATOR)
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tony Jones reported that the ftrace self tests on s390 do not work:
<6>Testing dynamic ftrace ops #1: (0 0 0 0 0) FAILED!
<6>Testing tracer irqsoff:
<3>failed to start irqsoff tracer
<4>.. no entries found ..FAILED!
<6>Testing tracer wakeup:
<3>failed to start wakeup tracer
<4>.. no entries found ..FAILED!
<6>Testing tracer function_graph:
<4>Failed to init function_graph tracer, init returned -19
<4>FAILED!
This happens because we forgot to adjust the instruction pointer that gets
passed to the ftrace trace function by MCOUNT_INSN_SIZE.
In addition change MCOUNT_INSN_SIZE to the correct value on 31 bit.
It only worked so far because the to be patched instruction was identical.
Reported-by: Tony Jones <tonyj@suse.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
On heavy paging load some guest cpus started to loop in gmap_ipte_notify.
This was visible as stalled cpus inside the guest. The gmap_ipte_notifier
tries to map a user page and then made sure that the pte is valid and
writable. Turns out that with the software change bit tracking the pte
can become read-only (and only software writable) if the page is clean.
Since we loop in this code, the page would stay clean and, therefore,
be never writable again.
Let us just use fixup_user_fault, that guarantees to call handle_mm_fault.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
since commit 838a2ae80a
Author: Shawn Guo <shawn.guo@linaro.org>
Date: Sat Jan 12 11:50:05 2013 +0000
ARM: use clockevents_config_and_register() where possible
The timer is wrongly configured and result in a nice crash
so revert it on rm9200 timer.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: stable <stable@vger.kernel.org> # 3.8+
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
CONFIG_ARCH_SUNXI currently doesn't enable a gpiolib, which causes build
problems when building a kernel with only the sunxi platform enabled.
Select ARCH_REQUIRE_GPIOLIB to solve this.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
The TB10x platform port includes a custom mechanism using to set up
default pin controller configurations using abilis,simple-default
pin configurations of nodes compatible with abilis,simple-pinctrl. This
mechanism is redundant with the Linux standard "default" pin
configuration, see commit ab78029ecc
"drivers/pinctrl: grab default handles from device core".
This patch removes the TB10x custom mechanism in favour of the Linux
standard.
Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config,
which enables some minor compile time optimization to avoid
uncessary code in mostly the suspend/resume path could cause
problems for userland.
In particular, the dependency for RTC_HCTOSYS on
!ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time
twice and simplifies suspend/resume, has the side effect
of causing the /sys/class/rtc/rtcN/hctosys flag to always be
zero, and this flag is commonly used by udev to setup the
/dev/rtc symlink to /dev/rtcN, which can cause pain for
older applications.
While the udev rules could use some work to be less fragile,
breaking userland should strongly be avoided. Additionally
the compile time optimizations are fairly minor, and the code
being optimized is likely to be reworked in the future, so
lets revert this change.
Reported-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: stable <stable@vger.kernel.org> #3.9
Cc: Feng Tang <feng.tang@intel.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Link: http://lkml.kernel.org/r/1366828376-18124-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
As per commit 764e0da1 (timers: Fixup the Kconfig consolidation
fallout), init/Kconfig already includes kernel/time/Kconfig, so no need
to do it explicitly for arm64.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The format of the lower 32-bits of the 64-bit operand to 'dc cisw' is
unchanged from ARMv7 architecture and the upper bits are RES0. This
implies that the 'way' field of the operand of 'dc cisw' occupies the
bit-positions [31 .. (32-A)]. Due to the use of 64-bit extended operands
to 'clz', the existing implementation of __flush_dcache_all is incorrectly
placing the 'way' field in the bit-positions [63 .. (64-A)].
Signed-off-by: Sukanto Ghosh <sghosh@apm.com>
Tested-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
The of_platform_populate() is currently invoked at device_initcall()
level. There are however drivers that use platform_driver_probe()
directly and they need the devices to be populated. This patch makes the
of_platform_populate() and arch_initcall().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Benoit Lecardonnel <Benoit.Lecardonnel@synopsys.com>
Tested-by: Benoit Lecardonnel <Benoit.Lecardonnel@synopsys.com>
Pull powerpc fixes from Benjamin Herrenschmidt:
"This is mostly bug fixes (some of them regressions, some of them I
deemed worth merging now) along with some patches from Li Zhong
hooking up the new context tracking stuff (for the new full NO_HZ)"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
powerpc: Set show_unhandled_signals to 1 by default
powerpc/perf: Fix setting of "to" addresses for BHRB
powerpc/pmu: Fix order of interpreting BHRB target entries
powerpc/perf: Move BHRB code into CONFIG_PPC64 region
powerpc: select HAVE_CONTEXT_TRACKING for pSeries
powerpc: Use the new schedule_user API on userspace preemption
powerpc: Exit user context on notify resume
powerpc: Exception hooks for context tracking subsystem
powerpc: Syscall hooks for context tracking subsystem
powerpc/booke64: Fix kernel hangs at kernel_dbg_exc
powerpc: Fix irq_set_affinity() return values
powerpc: Provide __bswapdi2
powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3
powerpc/powernv: Detect OPAL v3 API version
powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again
powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS
powerpc: Bring all threads online prior to migration/hibernation
powerpc/rtas_flash: Fix validate_flash buffer overflow issue
powerpc/kexec: Fix kexec when using VMX optimised memcpy
powerpc: Fix build errors STRICT_MM_TYPECHECKS
...
Instead of requesting all available spi cs-gpios, request only the ones used on
the board, in our case on the cpu module.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
First Ethernet device has a ".0" appended onto the device name.
Since on a non-DT boot the ethernet will be named "smsc911x.0"
and since the clocks are not converted to device tree these
names need to be matched when providing the name from
auxdata.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[edited commit message]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A recent move to rid header files which were hindering multiplatform
support forced address allocations out of the headers and into the
files which were using them. We also lost some useful macros such as
IO_ADDRESS(), so physical -> virtual addressing has been carried out
manually in this case. Unfortunately the incorrect value was converted.
This patch rectifies the error and ensures earlyprintk works again.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since: "05ec260 mfd: db8500-prcmu: update resource passing", the AB8500's
platform data 'ab8500_platdata' is passed directly as an attribute to
'db8500_prcmu_pdata', so there's no requirement to assign it a second
time. In fact, it's only due to an ordering issue that the entire
'db8500_prcmu_pdata' data structure isn't completely over-written by the
assignment in u8500_init_devices().
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently we only set the "to" address in the branch stack when the CPU
explicitly gives us a value. Unfortunately it only does this for XL form
branches (eg blr, bctr, bctar) and not I and B form branches (eg b, bc).
Fortunately if we read the instruction from memory we can extract the offset of
a branch and calculate the target address.
This adds a function power_pmu_bhrb_to() to calculate the target/to address of
the corresponding I and B form branches. It handles branches in both user and
kernel spaces. It also plumbs this into the perf brhb reading code.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The current Branch History Rolling Buffer (BHRB) code misinterprets the order
of entries in the hardware buffer. It assumes that a branch target address
will be read _after_ its corresponding branch. In reality the branch target
comes before (lower mfbhrb entry) it's corresponding branch.
This is a rewrite of the code to take this into account.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The new Branch History Rolling buffer (BHRB) code is only useful on 64bit
processors, so move it into the #ifdef CONFIG_PPC64 region.
This avoids code bloat on 32bit systems.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Start context tracking support from pSeries.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch corresponds to
[PATCH] x86: Use the new schedule_user API on userspace preemption
commit 0430499ce9
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch allows RCU usage in do_notify_resume, e.g. signal handling.
It corresponds to
[PATCH] x86: Exit RCU extended QS on notify resume
commit edf55fda35
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This is the exception hooks for context tracking subsystem, including
data access, program check, single step, instruction breakpoint, machine check,
alignment, fp unavailable, altivec assist, unknown exception, whose handlers
might use RCU.
This patch corresponds to
[PATCH] x86: Exception hooks for userspace RCU extended QS
commit 6ba3c97a38
But after the exception handling moved to generic code, and some changes in
following two commits:
56dd9470d7
context_tracking: Move exception handling to generic code
6c1e0256fa
context_tracking: Restore correct previous context state on exception exit
it is able for exception hooks to use the generic code above instead of a
redundant arch implementation.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This is the syscall slow path hooks for context tracking subsystem,
corresponding to
[PATCH] x86: Syscall hooks for userspace RCU extended QS
commit bf5a3c13b9
TIF_MEMDIE is moved to the second 16-bits (with value 17), as it seems there
is no asm code using it. TIF_NOHZ is added to _TIF_SYCALL_T_OR_A, so it is
better for it to be in the same 16 bits with others in the group, so in the
asm code, andi. with this group could work.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
MSR_DE is not cleared on entry to the kernel, and we don't clear it
explicitly outside of debug code. If we have MSR_DE set in
prime_debug_regs(), and the new thread has events enabled in DBCR0
(e.g. ICMP is set in thread->dbsr0, even though it was cleared in the
real DBCR0 when the thread got scheduled out), we'll end up taking a
debug exception in the kernel when DBCR0 is loaded. DSRR0 will not
point to an exception vector, and the kernel ends up hanging at
kernel_dbg_exc. Fix this by always clearing MSR_DE when we load new
debug state.
Another observed source of kernel_dbg_exc hangs is with the branch
taken event. If this event is active, but we take a non-debug trap
(e.g. a TLB miss or an asynchronous interrupt) before the next branch.
We end up taking a branch-taken debug exception on the initial branch
instruction of the exception vector, but because the debug exception is
DBSR_BT rather than DBSR_IC we branch to kernel_dbg_exc before even
checking the DSRR0 address. Fix this by checking for DBSR_BT as well
as DBSR_IC, which is what 32-bit does and what the comments suggest was
intended in the 64-bit code as well.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Some versions of GCC apparently expect this to be provided by libgcc.
Updates from Mikey to fix 32 bit version and adding "r" to registers.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The current code fails to handle kexec on OPALv2. This fixes it
and adds code to improve the situation on OPALv3 where we can
query the CPU status from the firmware and decide what to do
based on that.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Saw this warning again, and this time from the ret_from_fork path.
It seems we could clear the back chain earlier in copy_thread(), which
could cover both path, and also fix potential lockdep usage in
schedule_tail(), or exception occurred before we clear the back chain.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
We are getting build errors with CONFIG_PROC_FS=n:
arch/powerpc/kernel/rtas_flash.c
In function 'rtas_flash_init':
745:33: error: unused variable 'f' [-Werror=unused-variable]
But rtas_flash.c should not be built when CONFIG_PROC_FS=n, beacause all
it does is provide a /proc interface to the RTAS flash routines.
CONFIG_RTAS_FLASH already depends on CONFIG_RTAS_PROC, to indicate that
it depends on the RTAS proc support, but CONFIG_RTAS_PROC does not
depend on CONFIG_PROC_FS. So fix that.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
