Commit Graph

392 Commits

Author SHA1 Message Date
Linus Torvalds
5fd09ba682 xen: fixes and features for 5.2-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXNxbogAKCRCAXGG7T9hj
 vpyFAQCUWBVb3vHQqqqsboKYA86cJg/t8fjdhw+vFieDcLs7ZwEA4nBDP9JfoHiV
 HkDjhD3SEPS3kftsrR1PVGLrv/dIqgo=
 =4YnV
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.2b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

 - some minor cleanups

 - two small corrections for Xen on ARM

 - two fixes for Xen PVH guest support

 - a patch for a new command line option to tune virtual timer handling

* tag 'for-linus-5.2b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/arm: Use p2m entry with lock protection
  xen/arm: Free p2m entry if fail to add it to RB tree
  xen/pvh: correctly setup the PV EFI interface for dom0
  xen/pvh: set xen_domain_type to HVM in xen_pvh_init
  xenbus: drop useless LIST_HEAD in xenbus_write_watch() and xenbus_file_write()
  xen-netfront: mark expected switch fall-through
  xen: xen-pciback: fix warning Using plain integer as NULL pointer
  x86/xen: Add "xen_timer_slop" command line option
2019-05-15 18:44:52 -07:00
Waiman Long
5ac893b8cb ipc: allow boot time extension of IPCMNI from 32k to 16M
The maximum number of unique System V IPC identifiers was limited to
32k.  That limit should be big enough for most use cases.

However, there are some users out there requesting for more, especially
those that are migrating from Solaris which uses 24 bits for unique
identifiers.  To satisfy the need of those users, a new boot time kernel
option "ipcmni_extend" is added to extend the IPCMNI value to 16M.  This
is a 512X increase which should be big enough for users out there that
need a large number of unique IPC identifier.

The use of this new option will change the pattern of the IPC
identifiers returned by functions like shmget(2).  An application that
depends on such pattern may not work properly.  So it should only be
used if the users really need more than 32k of unique IPC numbers.

This new option does have the side effect of reducing the maximum number
of unique sequence numbers from 64k down to 128.  So it is a trade-off.

The computation of a new IPC id is not done in the performance critical
path.  So a little bit of additional overhead shouldn't have any real
performance impact.

Link: http://lkml.kernel.org/r/20190329204930.21620-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:52 -07:00
Aaro Koskinen
b287a25a71 panic/reboot: allow specifying reboot_mode for panic only
Allow specifying reboot_mode for panic only.  This is needed on systems
where ramoops is used to store panic logs, and user wants to use warm
reset to preserve those, while still having cold reset on normal
reboots.

Link: http://lkml.kernel.org/r/20190322004735.27702-1-aaro.koskinen@iki.fi
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:51 -07:00
Dan Williams
e900a918b0 mm: shuffle initial free memory to improve memory-side-cache utilization
Patch series "mm: Randomize free memory", v10.

This patch (of 3):

Randomization of the page allocator improves the average utilization of
a direct-mapped memory-side-cache.  Memory side caching is a platform
capability that Linux has been previously exposed to in HPC
(high-performance computing) environments on specialty platforms.  In
that instance it was a smaller pool of high-bandwidth-memory relative to
higher-capacity / lower-bandwidth DRAM.  Now, this capability is going
to be found on general purpose server platforms where DRAM is a cache in
front of higher latency persistent memory [1].

Robert offered an explanation of the state of the art of Linux
interactions with memory-side-caches [2], and I copy it here:

    It's been a problem in the HPC space:
    http://www.nersc.gov/research-and-development/knl-cache-mode-performance-coe/

    A kernel module called zonesort is available to try to help:
    https://software.intel.com/en-us/articles/xeon-phi-software

    and this abandoned patch series proposed that for the kernel:
    https://lkml.kernel.org/r/20170823100205.17311-1-lukasz.daniluk@intel.com

    Dan's patch series doesn't attempt to ensure buffers won't conflict, but
    also reduces the chance that the buffers will. This will make performance
    more consistent, albeit slower than "optimal" (which is near impossible
    to attain in a general-purpose kernel).  That's better than forcing
    users to deploy remedies like:
        "To eliminate this gradual degradation, we have added a Stream
         measurement to the Node Health Check that follows each job;
         nodes are rebooted whenever their measured memory bandwidth
         falls below 300 GB/s."

A replacement for zonesort was merged upstream in commit cc9aec03e5
("x86/numa_emulation: Introduce uniform split capability").  With this
numa_emulation capability, memory can be split into cache sized
("near-memory" sized) numa nodes.  A bind operation to such a node, and
disabling workloads on other nodes, enables full cache performance.
However, once the workload exceeds the cache size then cache conflicts
are unavoidable.  While HPC environments might be able to tolerate
time-scheduling of cache sized workloads, for general purpose server
platforms, the oversubscribed cache case will be the common case.

The worst case scenario is that a server system owner benchmarks a
workload at boot with an un-contended cache only to see that performance
degrade over time, even below the average cache performance due to
excessive conflicts.  Randomization clips the peaks and fills in the
valleys of cache utilization to yield steady average performance.

Here are some performance impact details of the patches:

1/ An Intel internal synthetic memory bandwidth measurement tool, saw a
   3X speedup in a contrived case that tries to force cache conflicts.
   The contrived cased used the numa_emulation capability to force an
   instance of the benchmark to be run in two of the near-memory sized
   numa nodes.  If both instances were placed on the same emulated they
   would fit and cause zero conflicts.  While on separate emulated nodes
   without randomization they underutilized the cache and conflicted
   unnecessarily due to the in-order allocation per node.

2/ A well known Java server application benchmark was run with a heap
   size that exceeded cache size by 3X.  The cache conflict rate was 8%
   for the first run and degraded to 21% after page allocator aging.  With
   randomization enabled the rate levelled out at 11%.

3/ A MongoDB workload did not observe measurable difference in
   cache-conflict rates, but the overall throughput dropped by 7% with
   randomization in one case.

4/ Mel Gorman ran his suite of performance workloads with randomization
   enabled on platforms without a memory-side-cache and saw a mix of some
   improvements and some losses [3].

While there is potentially significant improvement for applications that
depend on low latency access across a wide working-set, the performance
may be negligible to negative for other workloads.  For this reason the
shuffle capability defaults to off unless a direct-mapped
memory-side-cache is detected.  Even then, the page_alloc.shuffle=0
parameter can be specified to disable the randomization on those systems.

Outside of memory-side-cache utilization concerns there is potentially
security benefit from randomization.  Some data exfiltration and
return-oriented-programming attacks rely on the ability to infer the
location of sensitive data objects.  The kernel page allocator, especially
early in system boot, has predictable first-in-first out behavior for
physical pages.  Pages are freed in physical address order when first
onlined.

Quoting Kees:
    "While we already have a base-address randomization
     (CONFIG_RANDOMIZE_MEMORY), attacks against the same hardware and
     memory layouts would certainly be using the predictability of
     allocation ordering (i.e. for attacks where the base address isn't
     important: only the relative positions between allocated memory).
     This is common in lots of heap-style attacks. They try to gain
     control over ordering by spraying allocations, etc.

     I'd really like to see this because it gives us something similar
     to CONFIG_SLAB_FREELIST_RANDOM but for the page allocator."

While SLAB_FREELIST_RANDOM reduces the predictability of some local slab
caches it leaves vast bulk of memory to be predictably in order allocated.
However, it should be noted, the concrete security benefits are hard to
quantify, and no known CVE is mitigated by this randomization.

Introduce shuffle_free_memory(), and its helper shuffle_zone(), to perform
a Fisher-Yates shuffle of the page allocator 'free_area' lists when they
are initially populated with free memory at boot and at hotplug time.  Do
this based on either the presence of a page_alloc.shuffle=Y command line
parameter, or autodetection of a memory-side-cache (to be added in a
follow-on patch).

The shuffling is done in terms of CONFIG_SHUFFLE_PAGE_ORDER sized free
pages where the default CONFIG_SHUFFLE_PAGE_ORDER is MAX_ORDER-1 i.e.  10,
4MB this trades off randomization granularity for time spent shuffling.
MAX_ORDER-1 was chosen to be minimally invasive to the page allocator
while still showing memory-side cache behavior improvements, and the
expectation that the security implications of finer granularity
randomization is mitigated by CONFIG_SLAB_FREELIST_RANDOM.  The
performance impact of the shuffling appears to be in the noise compared to
other memory initialization work.

This initial randomization can be undone over time so a follow-on patch is
introduced to inject entropy on page free decisions.  It is reasonable to
ask if the page free entropy is sufficient, but it is not enough due to
the in-order initial freeing of pages.  At the start of that process
putting page1 in front or behind page0 still keeps them close together,
page2 is still near page1 and has a high chance of being adjacent.  As
more pages are added ordering diversity improves, but there is still high
page locality for the low address pages and this leads to no significant
impact to the cache conflict rate.

[1]: https://itpeernetwork.intel.com/intel-optane-dc-persistent-memory-operating-modes/
[2]: https://lkml.kernel.org/r/AT5PR8401MB1169D656C8B5E121752FC0F8AB120@AT5PR8401MB1169.NAMPRD84.PROD.OUTLOOK.COM
[3]: https://lkml.org/lkml/2018/10/12/309

[dan.j.williams@intel.com: fix shuffle enable]
  Link: http://lkml.kernel.org/r/154943713038.3858443.4125180191382062871.stgit@dwillia2-desk3.amr.corp.intel.com
[cai@lca.pw: fix SHUFFLE_PAGE_ALLOCATOR help texts]
  Link: http://lkml.kernel.org/r/20190425201300.75650-1-cai@lca.pw
Link: http://lkml.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Robert Elliott <elliott@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:48 -07:00
Linus Torvalds
fa4bff1650 Merge branch 'x86-mds-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MDS mitigations from Thomas Gleixner:
 "Microarchitectural Data Sampling (MDS) is a hardware vulnerability
  which allows unprivileged speculative access to data which is
  available in various CPU internal buffers. This new set of misfeatures
  has the following CVEs assigned:

     CVE-2018-12126  MSBDS  Microarchitectural Store Buffer Data Sampling
     CVE-2018-12130  MFBDS  Microarchitectural Fill Buffer Data Sampling
     CVE-2018-12127  MLPDS  Microarchitectural Load Port Data Sampling
     CVE-2019-11091  MDSUM  Microarchitectural Data Sampling Uncacheable Memory

  MDS attacks target microarchitectural buffers which speculatively
  forward data under certain conditions. Disclosure gadgets can expose
  this data via cache side channels.

  Contrary to other speculation based vulnerabilities the MDS
  vulnerability does not allow the attacker to control the memory target
  address. As a consequence the attacks are purely sampling based, but
  as demonstrated with the TLBleed attack samples can be postprocessed
  successfully.

  The mitigation is to flush the microarchitectural buffers on return to
  user space and before entering a VM. It's bolted on the VERW
  instruction and requires a microcode update. As some of the attacks
  exploit data structures shared between hyperthreads, full protection
  requires to disable hyperthreading. The kernel does not do that by
  default to avoid breaking unattended updates.

  The mitigation set comes with documentation for administrators and a
  deeper technical view"

* 'x86-mds-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/speculation/mds: Fix documentation typo
  Documentation: Correct the possible MDS sysfs values
  x86/mds: Add MDSUM variant to the MDS documentation
  x86/speculation/mds: Add 'mitigations=' support for MDS
  x86/speculation/mds: Print SMT vulnerable on MSBDS with mitigations off
  x86/speculation/mds: Fix comment
  x86/speculation/mds: Add SMT warning message
  x86/speculation: Move arch_smt_update() call to after mitigation decisions
  x86/speculation/mds: Add mds=full,nosmt cmdline option
  Documentation: Add MDS vulnerability documentation
  Documentation: Move L1TF to separate directory
  x86/speculation/mds: Add mitigation mode VMWERV
  x86/speculation/mds: Add sysfs reporting for MDS
  x86/speculation/mds: Add mitigation control for MDS
  x86/speculation/mds: Conditionally clear CPU buffers on idle entry
  x86/kvm/vmx: Add MDS protection when L1D Flush is not active
  x86/speculation/mds: Clear CPU buffers on exit to user
  x86/speculation/mds: Add mds_clear_cpu_buffers()
  x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests
  x86/speculation/mds: Add BUG_MSBDS_ONLY
  ...
2019-05-14 07:57:29 -07:00
Linus Torvalds
b970afcfca powerpc updates for 5.2
Highlights:
 
  - Support for Kernel Userspace Access/Execution Prevention (like
    SMAP/SMEP/PAN/PXN) on some 64-bit and 32-bit CPUs. This prevents the kernel
    from accidentally accessing userspace outside copy_to/from_user(), or
    ever executing userspace.
 
  - KASAN support on 32-bit.
 
  - Rework of where we map the kernel, vmalloc, etc. on 64-bit hash to use the
    same address ranges we use with the Radix MMU.
 
  - A rewrite into C of large parts of our idle handling code for 64-bit Book3S
    (ie. power8 & power9).
 
  - A fast path entry for syscalls on 32-bit CPUs, for a 12-17% speedup in the
    null_syscall benchmark.
 
  - On 64-bit bare metal we have support for recovering from errors with the time
    base (our clocksource), however if that fails currently we hang in __delay()
    and never crash. We now have support for detecting that case and short
    circuiting __delay() so we at least panic() and reboot.
 
  - Add support for optionally enabling the DAWR on Power9, which had to be
    disabled by default due to a hardware erratum. This has the effect of
    enabling hardware breakpoints for GDB, the downside is a badly behaved
    program could crash the machine by pointing the DAWR at cache inhibited
    memory. This is opt-in obviously.
 
  - xmon, our crash handler, gets support for a read only mode where operations
    that could change memory or otherwise disturb the system are disabled.
 
 Plus many clean-ups, reworks and minor fixes etc.
 
 Thanks to:
   Christophe Leroy, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Andrew
   Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Ben Hutchings,
   Bo YU, Breno Leitao, Cédric Le Goater, Christopher M. Riedl, Christoph
   Hellwig, Colin Ian King, David Gibson, Ganesh Goudar, Gautham R. Shenoy,
   George Spelvin, Greg Kroah-Hartman, Greg Kurz, Horia Geantă, Jagadeesh
   Pagadala, Joel Stanley, Joe Perches, Julia Lawall, Laurentiu Tudor, Laurent
   Vivier, Lukas Bulwahn, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
   Malaterre, Michael Neuling, Mukesh Ojha, Nathan Fontenot, Nathan Lynch,
   Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peng Hao, Qian Cai, Ravi
   Bangoria, Rick Lindsley, Russell Currey, Sachin Sant, Stewart Smith, Sukadev
   Bhattiprolu, Thomas Huth, Tobin C. Harding, Tyrel Datwyler, Valentin
   Schneider, Wei Yongjun, Wen Yang, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJc1WbwAAoJEFHr6jzI4aWAv5cP/iDskai4Az/GCa6yLj4b+det
 7mc7tTOaEzhUtvfrYYfHgvvdNNzo1ETv7rqTdZqtWJ3xfwdeowLFXXZwSywZKUDB
 bi4pcl2v55Qlf9kxgx9RDr6+4fTwGG4nhO2qPDJDR1umEih9mG/2HJ7d+Wnq6Va2
 E9srd+R6Fa0ty88+9vzBtdyllnDK1XHu3ahsxCH62aRm79ucuVrxyydWmbbs5lJe
 a7g/OQIPgZmObHhfXvw9DFkOvkp5Pm6hfHOeyQH2nTB5X6k0judWv00uoHTJgOuP
 DKxZtDhaGnajUfuhQYboDPOuFjY7lkfgEXaagyZsjdudqridTMmv1iU1o7iy8BT4
 AId4DyJbvFFgqRJkCwKzhKRRHPfFMfM7KTJ38GPZuPmniuULk9uiIy6JyY0tXO+l
 UQEclPzOTPkAE12FBaOBuqZqTRuBQuokWQF8ZDPOxbNAixHgFoRd4Z9diNwCPpLu
 +KoyCwd2Gm5DyX+mC85sWG28IPKi9Hhhw2XBOA5F4A2kH6uFa1BnERSRGYomx+pc
 BvEXHglf/vgV0XUQZfDCsiOecIKYuWxgre0/liLhhU5qMss2pxHczzffH4KtdykS
 9y7o3mVRcS7Moitbmb6SAJoQxbR5QhzfN832DbSd6jEfKdg1ytZlfHTG0WZYHKDs
 PHs6V1N+cQANdukutrJz
 =cUkd
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Slightly delayed due to the issue with printk() calling
  probe_kernel_read() interacting with our new user access prevention
  stuff, but all fixed now.

  The only out-of-area changes are the addition of a cpuhp_state, small
  additions to Documentation and MAINTAINERS updates.

  Highlights:

   - Support for Kernel Userspace Access/Execution Prevention (like
     SMAP/SMEP/PAN/PXN) on some 64-bit and 32-bit CPUs. This prevents
     the kernel from accidentally accessing userspace outside
     copy_to/from_user(), or ever executing userspace.

   - KASAN support on 32-bit.

   - Rework of where we map the kernel, vmalloc, etc. on 64-bit hash to
     use the same address ranges we use with the Radix MMU.

   - A rewrite into C of large parts of our idle handling code for
     64-bit Book3S (ie. power8 & power9).

   - A fast path entry for syscalls on 32-bit CPUs, for a 12-17% speedup
     in the null_syscall benchmark.

   - On 64-bit bare metal we have support for recovering from errors
     with the time base (our clocksource), however if that fails
     currently we hang in __delay() and never crash. We now have support
     for detecting that case and short circuiting __delay() so we at
     least panic() and reboot.

   - Add support for optionally enabling the DAWR on Power9, which had
     to be disabled by default due to a hardware erratum. This has the
     effect of enabling hardware breakpoints for GDB, the downside is a
     badly behaved program could crash the machine by pointing the DAWR
     at cache inhibited memory. This is opt-in obviously.

   - xmon, our crash handler, gets support for a read only mode where
     operations that could change memory or otherwise disturb the system
     are disabled.

  Plus many clean-ups, reworks and minor fixes etc.

  Thanks to: Christophe Leroy, Akshay Adiga, Alastair D'Silva, Alexey
  Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar,
  Anton Blanchard, Ben Hutchings, Bo YU, Breno Leitao, Cédric Le Goater,
  Christopher M. Riedl, Christoph Hellwig, Colin Ian King, David Gibson,
  Ganesh Goudar, Gautham R. Shenoy, George Spelvin, Greg Kroah-Hartman,
  Greg Kurz, Horia Geantă, Jagadeesh Pagadala, Joel Stanley, Joe
  Perches, Julia Lawall, Laurentiu Tudor, Laurent Vivier, Lukas Bulwahn,
  Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael
  Neuling, Mukesh Ojha, Nathan Fontenot, Nathan Lynch, Nicholas Piggin,
  Nick Desaulniers, Oliver O'Halloran, Peng Hao, Qian Cai, Ravi
  Bangoria, Rick Lindsley, Russell Currey, Sachin Sant, Stewart Smith,
  Sukadev Bhattiprolu, Thomas Huth, Tobin C. Harding, Tyrel Datwyler,
  Valentin Schneider, Wei Yongjun, Wen Yang, YueHaibing"

* tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (205 commits)
  powerpc/64s: Use early_mmu_has_feature() in set_kuap()
  powerpc/book3s/64: check for NULL pointer in pgd_alloc()
  powerpc/mm: Fix hugetlb page initialization
  ocxl: Fix return value check in afu_ioctl()
  powerpc/mm: fix section mismatch for setup_kup()
  powerpc/mm: fix redundant inclusion of pgtable-frag.o in Makefile
  powerpc/mm: Fix makefile for KASAN
  powerpc/kasan: add missing/lost Makefile
  selftests/powerpc: Add a signal fuzzer selftest
  powerpc/booke64: set RI in default MSR
  ocxl: Provide global MMIO accessors for external drivers
  ocxl: move event_fd handling to frontend
  ocxl: afu_irq only deals with IRQ IDs, not offsets
  ocxl: Allow external drivers to use OpenCAPI contexts
  ocxl: Create a clear delineation between ocxl backend & frontend
  ocxl: Don't pass pci_dev around
  ocxl: Split pci.c
  ocxl: Remove some unused exported symbols
  ocxl: Remove superfluous 'extern' from headers
  ocxl: read_pasid never returns an error, so make it void
  ...
2019-05-10 05:29:27 -07:00
Linus Torvalds
7664cd6e3a Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull intgrity updates from James Morris:
 "This contains just three patches, the remainder were either included
  in other pull requests (eg. audit, lockdown) or will be upstreamed via
  other subsystems (eg. kselftests, Power).

  Included here is one bug fix, one documentation update, and extending
  the x86 IMA arch policy rules to coordinate the different kernel
  module signature verification methods"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  doc/kernel-parameters.txt: Deprecate ima_appraise_tcb
  x86/ima: add missing include
  x86/ima: require signed kernel modules
2019-05-09 12:54:40 -07:00
Linus Torvalds
c620f7bd0b arm64 updates for 5.2
Mostly just incremental improvements here:
 
 - Introduce AT_HWCAP2 for advertising CPU features to userspace
 
 - Expose SVE2 availability to userspace
 
 - Support for "data cache clean to point of deep persistence" (DC PODP)
 
 - Honour "mitigations=off" on the cmdline and advertise status via sysfs
 
 - CPU timer erratum workaround (Neoverse-N1 #1188873)
 
 - Introduce perf PMU driver for the SMMUv3 performance counters
 
 - Add config option to disable the kuser helpers page for AArch32 tasks
 
 - Futex modifications to ensure liveness under contention
 
 - Rework debug exception handling to seperate kernel and user handlers
 
 - Non-critical fixes and cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzMFGgACgkQt6xw3ITB
 YzTicAf/TX1h1+ecbx4WJAa4qeiOCPoNpG9efldQumqJhKL44MR5bkhuShna5mwE
 ptm5qUXkZCxLTjzssZKnbdbgwa3t+emW8Of3D91IfI9akiZbMoDx5FGgcNbqjazb
 RLrhOFHwgontA38yppZN+DrL+sXbvif/CVELdHahkEx6KepSGaS2lmPXRmz/W56v
 4yIRy/zxc3Dhjgfm3wKh72nBwoZdLiIc4mchd5pthNlR9E2idrYkQegG1C+gA00r
 o8uZRVOWgoh7H+QJE+xLUc8PaNCg8xqRRXOuZYg9GOz6hh7zSWhm+f1nRz9S2tIR
 gIgsCHNqoO2I3E1uJpAQXDGtt2kFhA==
 =ulpJ
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "Mostly just incremental improvements here:

   - Introduce AT_HWCAP2 for advertising CPU features to userspace

   - Expose SVE2 availability to userspace

   - Support for "data cache clean to point of deep persistence" (DC PODP)

   - Honour "mitigations=off" on the cmdline and advertise status via
     sysfs

   - CPU timer erratum workaround (Neoverse-N1 #1188873)

   - Introduce perf PMU driver for the SMMUv3 performance counters

   - Add config option to disable the kuser helpers page for AArch32 tasks

   - Futex modifications to ensure liveness under contention

   - Rework debug exception handling to seperate kernel and user
     handlers

   - Non-critical fixes and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
  Documentation: Add ARM64 to kernel-parameters.rst
  arm64/speculation: Support 'mitigations=' cmdline option
  arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB
  arm64: enable generic CPU vulnerabilites support
  arm64: add sysfs vulnerability show for speculative store bypass
  arm64: Fix size of __early_cpu_boot_status
  clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters
  clocksource/arm_arch_timer: Remove use of workaround static key
  clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable
  clocksource/arm_arch_timer: Direcly assign set_next_event workaround
  arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct
  watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
  ARM: vdso: Remove dependency with the arch_timer driver internals
  arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1
  arm64: Add part number for Neoverse N1
  arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT
  arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32
  arm64: mm: Remove pte_unmap_nested()
  arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
  arm64: compat: Reduce address limit for 64K pages
  ...
2019-05-06 17:54:22 -07:00
Linus Torvalds
14be4c61c2 s390 updates for the 5.2 merge window
- Support for kernel address space layout randomization
 
  - Add support for kernel image signature verification
 
  - Convert s390 to the generic get_user_pages_fast code
 
  - Convert s390 to the stack unwind API analog to x86
 
  - Add support for CPU directed interrupts for PCI devices
 
  - Provide support for MIO instructions to the PCI base layer, this
    will allow the use of direct PCI mappings in user space code
 
  - Add the basic KVM guest ultravisor interface for protected VMs
 
  - Add AT_HWCAP bits for several new hardware capabilities
 
  - Update the CPU measurement facility counter definitions to SVN 6
 
  - Arnds cleanup patches for his quest to get LLVM compiles working
 
  - A vfio-ccw update with bug fixes and support for halt and clear
 
  - Improvements for the hardware TRNG code
 
  - Another round of cleanup for the QDIO layer
 
  - Numerous cleanups and bug fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJc0CCEAAoJEDjwexyKj9rgjmkH/A3e2drvuP/hSF3xfCKTQFdx
 /PoLHQVCqENB3HU3FA/ljoXuG6jMgwj61looqlxBNumXFpIfTg0E1JC5S4wRGJ+K
 cOVhIKV53gcuZkRcCJQp0WMnGzpk1Daf7iYXYmAl+7e+mREUPxOuJ0Ei6vXvRGZS
 8cQrUCGrtPgkAeLlndypHI2M2TDDGJIMczOGbOZau8+8Lo7Wq9zt5y0h/v0ew37g
 ogA0eGh6koU1435dt2pclZRiZ1XOcar3Uin9ioT+RnSgJ4pr1Pza/F6IGO0RdQa+
 rva990lqGFp5r9lE4rMCwK9LWb/rfHdVPd35t9XPwphnQ/ORoWUwLk3uc5XOHow=
 =dbuy
 -----END PGP SIGNATURE-----

Merge tag 's390-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Martin Schwidefsky:

 - Support for kernel address space layout randomization

 - Add support for kernel image signature verification

 - Convert s390 to the generic get_user_pages_fast code

 - Convert s390 to the stack unwind API analog to x86

 - Add support for CPU directed interrupts for PCI devices

 - Provide support for MIO instructions to the PCI base layer, this will
   allow the use of direct PCI mappings in user space code

 - Add the basic KVM guest ultravisor interface for protected VMs

 - Add AT_HWCAP bits for several new hardware capabilities

 - Update the CPU measurement facility counter definitions to SVN 6

 - Arnds cleanup patches for his quest to get LLVM compiles working

 - A vfio-ccw update with bug fixes and support for halt and clear

 - Improvements for the hardware TRNG code

 - Another round of cleanup for the QDIO layer

 - Numerous cleanups and bug fixes

* tag 's390-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (98 commits)
  s390/vdso: drop unnecessary cc-ldoption
  s390: fix clang -Wpointer-sign warnigns in boot code
  s390: drop CONFIG_VIRT_TO_BUS
  s390: boot, purgatory: pass $(CLANG_FLAGS) where needed
  s390: only build for new CPUs with clang
  s390: simplify disabled_wait
  s390/ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
  s390/unwind: introduce stack unwind API
  s390/opcodes: add missing instructions to the disassembler
  s390/bug: add entry size to the __bug_table section
  s390: use proper expoline sections for .dma code
  s390/nospec: rename assembler generated expoline thunks
  s390: add missing ENDPROC statements to assembler functions
  locking/lockdep: check for freed initmem in static_obj()
  s390/kernel: add support for kernel address space layout randomization (KASLR)
  s390/kernel: introduce .dma sections
  s390/sclp: do not use static sccbs
  s390/kprobes: use static buffer for insn_page
  s390/kernel: convert SYSCALL and PGM_CHECK handlers to .quad
  s390/kernel: build a relocatable kernel
  ...
2019-05-06 16:42:54 -07:00
Linus Torvalds
db10ad041b Merge branch 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Ingo Molnar:
 "Two changes: an LTO improvement, plus the new 'nowatchdog' boot option
  to disable the clocksource watchdog"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/timer: Don't inline __const_udelay()
  x86/tsc: Add option to disable tsc clocksource watchdog
2019-05-06 16:31:44 -07:00
Linus Torvalds
e913c4a4c2 Merge branch 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kdump update from Ingo Molnar:
 "This includes two changes:

   - Raise the crash kernel reservation limit from from ~896MB to ~4GB.

     Only very old (and already known-broken) kexec-tools is supposed to
     be affected by this negatively.

   - Allow higher than 4GB crash kernel allocations when low allocations
     fail"

* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kdump: Fall back to reserve high crashkernel memory
  x86/kdump: Have crashkernel=X reserve under 4G by default
2019-05-06 16:11:45 -07:00
Linus Torvalds
0a499fc5c3 Merge branch 'core-speculation-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull speculation mitigation update from Ingo Molnar:
 "This adds the "mitigations=" bootline option, which offers a
  cross-arch set of options that will work on x86, PowerPC and s390 that
  will map to the arch specific option internally"

* 'core-speculation-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  s390/speculation: Support 'mitigations=' cmdline option
  powerpc/speculation: Support 'mitigations=' cmdline option
  x86/speculation: Support 'mitigations=' cmdline option
  cpu/speculation: Add 'mitigations=' cmdline option
2019-05-06 13:01:16 -07:00
Josh Poimboeuf
a111b7c0f2 arm64/speculation: Support 'mitigations=' cmdline option
Configure arm64 runtime CPU speculation bug mitigations in accordance
with the 'mitigations=' cmdline option.  This affects Meltdown, Spectre
v2, and Speculative Store Bypass.

The default behavior is unchanged.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
[will: reorder checks so KASLR implies KPTI and SSBS is affected by cmdline]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-01 14:48:07 +01:00
Sebastian Ott
5627130380 s390/pci: add parameter to disable usage of MIO instructions
Allow users to disable usage of MIO instructions by specifying pci=nomio
at the kernel command line.

Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29 10:47:01 +02:00
Sebastian Ott
fbfe07d440 s390/pci: add parameter to force floating irqs
Provide a kernel parameter to force the usage of floating interrupts.

Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29 10:47:01 +02:00
Jeremy Linton
e5ce5e7267 arm64: Provide a command line to disable spectre_v2 mitigation
There are various reasons, such as benchmarking, to disable spectrev2
mitigation on a machine. Provide a command-line option to do so.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-26 16:26:42 +01:00
Will Deacon
cbafee55b5 Merge branch 'core/speculation' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-next/mitigations
Pull in core support for the "mitigations=" cmdline option from Thomas
Gleixner via -tip, which we can build on top of when we expose our
mitigation state via sysfs.
2019-04-26 13:32:20 +01:00
Ryan Thibodeaux
2ec16bc0fc x86/xen: Add "xen_timer_slop" command line option
Add a new command-line option "xen_timer_slop=<INT>" that sets the
minimum delta of virtual Xen timers. This commit does not change the
default timer slop value for virtual Xen timers.

Lowering the timer slop value should improve the accuracy of virtual
timers (e.g., better process dispatch latency), but it will likely
increase the number of virtual timer interrupts (relative to the
original slop setting).

The original timer slop value has not changed since the introduction
of the Xen-aware Linux kernel code. This commit provides users an
opportunity to tune timer performance given the refinements to
hardware and the Xen event channel processing. It also mirrors
a feature in the Xen hypervisor - the "timer_slop" Xen command line
option.

[boris: updated comment describing TIMER_SLOP]

Signed-off-by: Ryan Thibodeaux <ryan.thibodeaux@starlab.io>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-04-23 11:06:26 -04:00
Dave Young
b9ac3849af x86/kdump: Fall back to reserve high crashkernel memory
crashkernel=xM tries to reserve memory for the crash kernel under 4G,
which is enough, usually. But this could fail sometimes, for example
when one tries to reserve a big chunk like 2G, for example.

So let the crashkernel=xM just fall back to use high memory in case it
fails to find a suitable low range. Do not set the ,high as default
because it allocates extra low memory for DMA buffers and swiotlb, and
this is not always necessary for all machines.

Typically, crashkernel=128M usually works with low reservation under 4G,
so keep <4G as default.

 [ bp: Massage. ]

Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: linux-doc@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: piliu@redhat.com
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sinan Kaya <okaya@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thymo van Beers <thymovanbeers@gmail.com>
Cc: vgoyal@redhat.com
Cc: x86-ml <x86@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Zhimin Gu <kookoo.gu@intel.com>
Link: https://lkml.kernel.org/r/20190422031905.GA8387@dhcp-128-65.nay.redhat.com
2019-04-22 10:23:05 +02:00
Christophe Leroy
de78a9c42a powerpc: Add a framework for Kernel Userspace Access Protection
This patch implements a framework for Kernel Userspace Access
Protection.

Then subarches will have the possibility to provide their own
implementation by providing setup_kuap() and
allow/prevent_user_access().

Some platforms will need to know the area accessed and whether it is
accessed from read, write or both. Therefore source, destination and
size and handed over to the two functions.

mpe: Rename to allow/prevent rather than unlock/lock, and add
read/write wrappers. Drop the 32-bit code for now until we have an
implementation for it. Add kuap to pt_regs for 64-bit as well as
32-bit. Don't split strings, use pr_crit_ratelimited().

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-21 23:05:57 +10:00
Christophe Leroy
0fb1c25ab5 powerpc: Add skeleton for Kernel Userspace Execution Prevention
This patch adds a skeleton for Kernel Userspace Execution Prevention.

Then subarches implementing it have to define CONFIG_PPC_HAVE_KUEP
and provide setup_kuep() function.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Don't split strings, use pr_crit_ratelimited()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-21 23:05:56 +10:00
Josh Poimboeuf
5c14068f87 x86/speculation/mds: Add 'mitigations=' support for MDS
Add MDS to the new 'mitigations=' cmdline option.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-04-18 11:20:41 +02:00
Thomas Gleixner
e9fee6fe08 Merge branch 'core/speculation' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
Pull in the command line updates from the tip tree so the MDS parts can be
added.
2019-04-17 21:55:31 +02:00
Josh Poimboeuf
0336e04a65 s390/speculation: Support 'mitigations=' cmdline option
Configure s390 runtime CPU speculation bug mitigations in accordance
with the 'mitigations=' cmdline option.  This affects Spectre v1 and
Spectre v2.

The default behavior is unchanged.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86)
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arch@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/e4a161805458a5ec88812aac0307ae3908a030fc.1555085500.git.jpoimboe@redhat.com
2019-04-17 21:37:29 +02:00
Josh Poimboeuf
782e69efb3 powerpc/speculation: Support 'mitigations=' cmdline option
Configure powerpc CPU runtime speculation bug mitigations in accordance
with the 'mitigations=' cmdline option.  This affects Meltdown, Spectre
v1, Spectre v2, and Speculative Store Bypass.

The default behavior is unchanged.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86)
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arch@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/245a606e1a42a558a310220312d9b6adb9159df6.1555085500.git.jpoimboe@redhat.com
2019-04-17 21:37:29 +02:00
Josh Poimboeuf
d68be4c4d3 x86/speculation: Support 'mitigations=' cmdline option
Configure x86 runtime CPU speculation bug mitigations in accordance with
the 'mitigations=' cmdline option.  This affects Meltdown, Spectre v2,
Speculative Store Bypass, and L1TF.

The default behavior is unchanged.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86)
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arch@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/6616d0ae169308516cfdf5216bedd169f8a8291b.1555085500.git.jpoimboe@redhat.com
2019-04-17 21:37:28 +02:00
Josh Poimboeuf
98af845294 cpu/speculation: Add 'mitigations=' cmdline option
Keeping track of the number of mitigations for all the CPU speculation
bugs has become overwhelming for many users.  It's getting more and more
complicated to decide which mitigations are needed for a given
architecture.  Complicating matters is the fact that each arch tends to
have its own custom way to mitigate the same vulnerability.

Most users fall into a few basic categories:

a) they want all mitigations off;

b) they want all reasonable mitigations on, with SMT enabled even if
   it's vulnerable; or

c) they want all reasonable mitigations on, with SMT disabled if
   vulnerable.

Define a set of curated, arch-independent options, each of which is an
aggregation of existing options:

- mitigations=off: Disable all mitigations.

- mitigations=auto: [default] Enable all the default mitigations, but
  leave SMT enabled, even if it's vulnerable.

- mitigations=auto,nosmt: Enable all the default mitigations, disabling
  SMT if needed by a mitigation.

Currently, these options are placeholders which don't actually do
anything.  They will be fleshed out in upcoming patches.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86)
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arch@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/b07a8ef9b7c5055c3a4637c87d07c296d5016fe0.1555085500.git.jpoimboe@redhat.com
2019-04-17 21:37:28 +02:00
Petr Vorel
41475a3eba doc/kernel-parameters.txt: Deprecate ima_appraise_tcb
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-04-10 16:41:01 -04:00
Josh Poimboeuf
d71eb0ce10 x86/speculation/mds: Add mds=full,nosmt cmdline option
Add the mds=full,nosmt cmdline option.  This is like mds=full, but with
SMT disabled if the CPU is vulnerable.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
2019-04-02 20:02:36 +02:00
Paul E. McKenney
da8739f23f rcu: Allow rcu_nocbs= to specify all CPUs
Currently, the rcu_nocbs= kernel boot parameter requires that a specific
list of CPUs be specified, and has no way to say "all of them".
As noted by user RavFX in a comment to Phoronix topic 1002538, this
is an inconvenient side effect of the removal of the RCU_NOCB_CPU_ALL
Kconfig option.  This commit therefore enables the rcu_nocbs= kernel boot
parameter to be given the string "all", as in "rcu_nocbs=all" to specify
that all CPUs on the system are to have their RCU callbacks offloaded.

Another approach would be to make cpulist_parse() check for "all", but
there are uses of cpulist_parse() that do other checking, which could
conflict with an "all".  This commit therefore focuses on the specific
use of cpulist_parse() in rcu_nocb_setup().

Just a note to other people who would like changes to Linux-kernel RCU:
If you send your requests to me directly, they might get fixed somewhat
faster.  RavFX's comment was posted on January 22, 2018 and I first saw
it on March 5, 2019.  And the only reason that I found it -at- -all- was
that I was looking for projects using RCU, and my search engine showed
me that Phoronix comment quite by accident.  Your choice, though!  ;-)

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-26 14:37:49 -07:00
Juri Lelli
0f0b7e1cc7 x86/tsc: Add option to disable tsc clocksource watchdog
Clocksource watchdog has been found responsible for generating latency
spikes (in the 10-20 us range) when woken up to check for TSC stability.

Add an option to disable it at boot.

Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: linux-rt-users@vger.kernel.org
Cc: peterz@infradead.org
Cc: bristot@redhat.com
Cc: williams@redhat.com
Link: https://lkml.kernel.org/r/20190307120913.13168-1-juri.lelli@redhat.com
2019-03-22 14:14:58 +01:00
Linus Torvalds
077d3dafe6 Merge branch 'core-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull watchdog core update from Thomas Gleixner:
 "A single commit adding a command line parameter which allows to set
  the watchdog threshold on the kernel command-line, so kernels with
  massive debug facilities enabled won't trigger the watchdog during
  early boot and before the threshold can be changed via sysctl"

* 'core-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog/core: Add watchdog_thresh command line parameter
2019-03-10 13:46:08 -07:00
Linus Torvalds
3d8dfe75ef arm64 updates for 5.1:
- Pseudo NMI support for arm64 using GICv3 interrupt priorities
 
 - uaccess macros clean-up (unsafe user accessors also merged but
   reverted, waiting for objtool support on arm64)
 
 - ptrace regsets for Pointer Authentication (ARMv8.3) key management
 
 - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the
   riscv maintainers)
 
 - arm64/perf updates: PMU bindings converted to json-schema, unused
   variable and misleading comment removed
 
 - arm64/debug fixes to ensure checking of the triggering exception level
   and to avoid the propagation of the UNKNOWN FAR value into the si_code
   for debug signals
 
 - Workaround for Fujitsu A64FX erratum 010001
 
 - lib/raid6 ARM NEON optimisations
 
 - NR_CPUS now defaults to 256 on arm64
 
 - Minor clean-ups (documentation/comments, Kconfig warning, unused
   asm-offsets, clang warnings)
 
 - MAINTAINERS update for list information to the ARM64 ACPI entry
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlyCl0cACgkQa9axLQDI
 XvEyKxAAiogBZLbyhcy8bTUHVzVoJE0FyAkdO2wWnnaff2Ohkhy1Y/npv33IeK2q
 RknxqDIx2DUUVPJNRZGoI/WwBtTZdKaAnW4rIKG84yC1eAkFcd96WQasaZzcp1qY
 HmvbJiYXM0bh+0J7i3Wgry/QzOkrltJFJW2kp6Wd5aFE+R1WyWyxT6d+Fp0J3vlA
 bT70jlpBK6LXEOmmBS+04Ml02+8MvaGxIl8EInBHSfDLRLErj5E8n41rRHKUiSWz
 maWI+kVoLYwOE68xiZlDftUBEeQpUSWgg2nxeK+640QSl1wJmVcRcY9nm6TZeMG2
 AiZTR9a7cP5rrdSN5suUmb7d4AMMVlVMisGDlwb+9oCxeTRDzg0uwACaVgHfPqQr
 UeBdHbL9nStN7uBH23H8L9mKk+tqpFmk0sgzdrKejOwysAiqWV8aazb/Na3qnVRl
 J1B5opxMnGOsjXmHvtG/tiZl281Uwz5ZmzfLmIY3gUZgUgdA3511Egp0ry5y1dzJ
 SkYC4Hmzb2ybQvXGIDDa3OzCwXXiqyqKsO+O8Egg1k4OIwbp3w+NHE7gKeA+dMgD
 gjN7zEalCUi46Q28xiCPEb+88BpQ18czIWGQLb9mAnmYeZPjqqenXKXuRHr4lgVe
 jPURJ/vqvFEglZJN1RDuQHKzHEcm5f2XE566sMZYdSoeiUCb0QM=
 =2U56
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - Pseudo NMI support for arm64 using GICv3 interrupt priorities

 - uaccess macros clean-up (unsafe user accessors also merged but
   reverted, waiting for objtool support on arm64)

 - ptrace regsets for Pointer Authentication (ARMv8.3) key management

 - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by
   the riscv maintainers)

 - arm64/perf updates: PMU bindings converted to json-schema, unused
   variable and misleading comment removed

 - arm64/debug fixes to ensure checking of the triggering exception
   level and to avoid the propagation of the UNKNOWN FAR value into the
   si_code for debug signals

 - Workaround for Fujitsu A64FX erratum 010001

 - lib/raid6 ARM NEON optimisations

 - NR_CPUS now defaults to 256 on arm64

 - Minor clean-ups (documentation/comments, Kconfig warning, unused
   asm-offsets, clang warnings)

 - MAINTAINERS update for list information to the ARM64 ACPI entry

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  arm64: mmu: drop paging_init comments
  arm64: debug: Ensure debug handlers check triggering exception level
  arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals
  Revert "arm64: uaccess: Implement unsafe accessors"
  arm64: avoid clang warning about self-assignment
  arm64: Kconfig.platforms: fix warning unmet direct dependencies
  lib/raid6: arm: optimize away a mask operation in NEON recovery routine
  lib/raid6: use vdupq_n_u8 to avoid endianness warnings
  arm64: io: Hook up __io_par() for inX() ordering
  riscv: io: Update __io_[p]ar() macros to take an argument
  asm-generic/io: Pass result of I/O accessor to __io_[p]ar()
  arm64: Add workaround for Fujitsu A64FX erratum 010001
  arm64: Rename get_thread_info()
  arm64: Remove documentation about TIF_USEDFPU
  arm64: irqflags: Fix clang build warnings
  arm64: Enable the support of pseudo-NMIs
  arm64: Skip irqflags tracing for NMI in IRQs disabled context
  arm64: Skip preemption when exiting an NMI
  arm64: Handle serror in NMI context
  irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI
  ...
2019-03-10 10:17:23 -07:00
Linus Torvalds
1a29e85750 A fairly routine cycle for docs - lots of typo fixes, some new documents,
and more translations.  There's also some LICENSES adjustments from
 Thomas.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAlyBl54PHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YxoYH/3OcInUSk17Cb+wNpnJX66dXyVvzZcuAh5aU
 HW5YWIIlp60jwsM0z+sVqNR51tfC+eMjw2HOWj0hOEUju7UGm7aDtB+WkEeJ7GUk
 e/FX+GXD/OygQtpwXRQraWU/RO3RPSB9JKodF5tQ6aihOzsQGB9c11I0/f3Qp7+U
 vaLBOdAlpQYemlzLKbskRZ2YpokELfpgwSb6O7mpI9i3mJeZA/lpyYSmHQxqwvG7
 sqrmm7vHB7b0tZGqQISQaZNdUmSSD1lRfOX3brFw2DOIj2V2M1+O/8smBtRuAGf5
 B03C7LjkNFn55tn1OHYlWEv8RpG5kH3VNc896jiWPDOXNpMSgl8=
 =bOsl
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.1' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A fairly routine cycle for docs - lots of typo fixes, some new
  documents, and more translations. There's also some LICENSES
  adjustments from Thomas"

* tag 'docs-5.1' of git://git.lwn.net/linux: (74 commits)
  docs: Bring some order to filesystem documentation
  Documentation/locking/lockdep: Drop last two chars of sample states
  doc: rcu: Suspicious RCU usage is a warning
  docs: driver-api: iio: fix errors in documentation
  Documentation/process/howto: Update for 4.x -> 5.x versioning
  docs: Explicitly state that the 'Fixes:' tag shouldn't split lines
  doc: security: Add kern-doc for lsm_hooks.h
  doc: sctp: Merge and clean up rst files
  Docs: Correct /proc/stat path
  scripts/spdxcheck.py: fix C++ comment style detection
  doc: fix typos in license-rules.rst
  Documentation: fix admin-guide/README.rst minimum gcc version requirement
  doc: process: complete removal of info about -git patches
  doc: translations: sync translations 'remove info about -git patches'
  perf-security: wrap paragraphs on 72 columns
  perf-security: elaborate on perf_events/Perf privileged users
  perf-security: document collected perf_events/Perf data categories
  perf-security: document perf_events/Perf resource control
  sysfs.txt: add note on available attribute macros
  docs: kernel-doc: typo "if ... if" -> "if ... is"
  ...
2019-03-09 09:56:17 -08:00
Linus Torvalds
ae5906ceee Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:

 - Extend LSM stacking to allow sharing of cred, file, ipc, inode, and
   task blobs. This paves the way for more full-featured LSMs to be
   merged, and is specifically aimed at LandLock and SARA LSMs. This
   work is from Casey and Kees.

 - There's a new LSM from Micah Morton: "SafeSetID gates the setid
   family of syscalls to restrict UID/GID transitions from a given
   UID/GID to only those approved by a system-wide whitelist." This
   feature is currently shipping in ChromeOS.

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (62 commits)
  keys: fix missing __user in KEYCTL_PKEY_QUERY
  LSM: Update list of SECURITYFS users in Kconfig
  LSM: Ignore "security=" when "lsm=" is specified
  LSM: Update function documentation for cap_capable
  security: mark expected switch fall-throughs and add a missing break
  tomoyo: Bump version.
  LSM: fix return value check in safesetid_init_securityfs()
  LSM: SafeSetID: add selftest
  LSM: SafeSetID: remove unused include
  LSM: SafeSetID: 'depend' on CONFIG_SECURITY
  LSM: Add 'name' field for SafeSetID in DEFINE_LSM
  LSM: add SafeSetID module that gates setid calls
  LSM: add SafeSetID module that gates setid calls
  tomoyo: Allow multiple use_group lines.
  tomoyo: Coding style fix.
  tomoyo: Swicth from cred->security to task_struct->security.
  security: keys: annotate implicit fall throughs
  security: keys: annotate implicit fall throughs
  security: keys: annotate implicit fall through
  capabilities:: annotate implicit fall through
  ...
2019-03-07 11:44:01 -08:00
Linus Torvalds
f90d64483e USB/PHY patches for 5.1-rc1
Here is the big USB/PHY driver pull request for 5.1-rc1.
 
 The usual set of gadget driver updates, phy driver updates (you will
 have a merge issue with Kconfig and Makefile), xhci updates, and typec
 additions.  Also included in here are a lot of small cleanups and fixes
 and driver updates where needed.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+hsw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynfNwCgqKKg+MxJ9pFjrwfWYOrbk+BBe2UAn2Elp4ia
 8FTdneQfN2J8Hhc6KGXE
 =Kx9I
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver pull request for 5.1-rc1.

  The usual set of gadget driver updates, phy driver updates, xhci
  updates, and typec additions. Also included in here are a lot of small
  cleanups and fixes and driver updates where needed.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  wusb: Remove unnecessary static function ckhdid_printf
  usb: core: make default autosuspend delay configurable
  usb: core: Fix typo in description of "authorized_default"
  usb: chipidea: Refactor USB PHY selection and keep a single PHY
  usb: chipidea: Grab the (legacy) USB PHY by phandle first
  usb: chipidea: imx: set power polarity
  dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
  usb: chipidea: imx: remove unused header files
  usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
  usb: core: add option of only authorizing internal devices
  usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
  usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
  usb: xhci: fix build warning - missing prototype
  usb: xhci: dbc: Fixing typo error.
  usb: xhci: remove unused member 'parent' in xhci_regset struct
  xhci: tegra: Prevent error pointer dereference
  USB: serial: option: add Telit ME910 ECM composition
  usb: core: Replace hardcoded check with inline function from usb.h
  usb: core: skip interfaces disabled in devicetree
  usb: typec: mux: remove redundant check on variable match
  ...
2019-03-06 16:48:27 -08:00
Linus Torvalds
e431f2d74e Driver core patches for 5.1-rc1
Here is the big driver core patchset for 5.1-rc1
 
 More patches than "normal" here this merge window, due to some work in
 the driver core by Alexander Duyck to rework the async probe
 functionality to work better for a number of devices, and independant
 work from Rafael for the device link functionality to make it work
 "correctly".
 
 Also in here is:
 	- lots of BUS_ATTR() removals, the macro is about to go away
 	- firmware test fixups
 	- ihex fixups and simplification
 	- component additions (also includes i915 patches)
 	- lots of minor coding style fixups and cleanups.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
 ep8g+6oRLxJy414hogxQ
 =bLs2
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big driver core patchset for 5.1-rc1

  More patches than "normal" here this merge window, due to some work in
  the driver core by Alexander Duyck to rework the async probe
  functionality to work better for a number of devices, and independant
  work from Rafael for the device link functionality to make it work
  "correctly".

  Also in here is:

   - lots of BUS_ATTR() removals, the macro is about to go away

   - firmware test fixups

   - ihex fixups and simplification

   - component additions (also includes i915 patches)

   - lots of minor coding style fixups and cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
  driver core: platform: remove misleading err_alloc label
  platform: set of_node in platform_device_register_full()
  firmware: hardcode the debug message for -ENOENT
  driver core: Add missing description of new struct device_link field
  driver core: Fix PM-runtime for links added during consumer probe
  drivers/component: kerneldoc polish
  async: Add cmdline option to specify drivers to be async probed
  driver core: Fix possible supplier PM-usage counter imbalance
  PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
  driver: platform: Support parsing GpioInt 0 in platform_get_irq()
  selftests: firmware: fix verify_reqs() return value
  Revert "selftests: firmware: remove use of non-standard diff -Z option"
  Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
  device: Fix comment for driver_data in struct device
  kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
  sysfs: remove unused include of kernfs-internal.h
  driver core: Postpone DMA tear-down until after devres release
  driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
  PM-runtime: Take suppliers into account in __pm_runtime_set_status()
  device.h: Add __cold to dev_<level> logging functions
  ...
2019-03-06 14:52:48 -08:00
Thomas Gleixner
5999bbe7a6 Documentation: Add MDS vulnerability documentation
Add the initial MDS vulnerability documentation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jon Masters <jcm@redhat.com>
2019-03-06 21:52:16 +01:00
Thomas Gleixner
65fd4cb65b Documentation: Move L1TF to separate directory
Move L!TF to a separate directory so the MDS stuff can be added at the
side. Otherwise the all hardware vulnerabilites have their own top level
entry. Should have done that right away.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jon Masters <jcm@redhat.com>
2019-03-06 21:52:15 +01:00
Thomas Gleixner
bc1241700a x86/speculation/mds: Add mitigation control for MDS
Now that the mitigations are in place, add a command line parameter to
control the mitigation, a mitigation selector function and a SMT update
mechanism.

This is the minimal straight forward initial implementation which just
provides an always on/off mode. The command line parameter is:

  mds=[full|off]

This is consistent with the existing mitigations for other speculative
hardware vulnerabilities.

The idle invocation is dynamically updated according to the SMT state of
the system similar to the dynamic update of the STIBP mitigation. The idle
mitigation is limited to CPUs which are only affected by MSBDS and not any
other variant, because the other variants cannot be mitigated on SMT
enabled systems.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jon Masters <jcm@redhat.com>
Tested-by: Jon Masters <jcm@redhat.com>
2019-03-06 21:52:14 +01:00
Linus Torvalds
c8f5ed6ef9 Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
 "The main EFI changes in this cycle were:

   - Use 32-bit alignment for efi_guid_t

   - Allow the SetVirtualAddressMap() call to be omitted

   - Implement earlycon=efifb based on existing earlyprintk code

   - Various minor fixes and code cleanups from Sai, Ard and me"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Fix build error due to enum collision between efi.h and ima.h
  efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation
  x86: Make ARCH_USE_MEMREMAP_PROT a generic Kconfig symbol
  efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted
  efi: Replace GPL license boilerplate with SPDX headers
  efi/fdt: Apply more cleanups
  efi: Use 32-bit alignment for efi_guid_t
  efi/memattr: Don't bail on zero VA if it equals the region's PA
  x86/efi: Mark can_free_region() as an __init function
2019-03-06 07:13:56 -08:00
Linus Torvalds
3717f613f4 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main RCU related changes in this cycle were:

   - Additional cleanups after RCU flavor consolidation

   - Grace-period forward-progress cleanups and improvements

   - Documentation updates

   - Miscellaneous fixes

   - spin_is_locked() conversions to lockdep

   - SPDX changes to RCU source and header files

   - SRCU updates

   - Torture-test updates, including nolibc updates and moving nolibc to
     tools/include"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  locking/locktorture: Convert to SPDX license identifier
  linux/torture: Convert to SPDX license identifier
  torture: Convert to SPDX license identifier
  linux/srcu: Convert to SPDX license identifier
  linux/rcutree: Convert to SPDX license identifier
  linux/rcutiny: Convert to SPDX license identifier
  linux/rcu_sync: Convert to SPDX license identifier
  linux/rcu_segcblist: Convert to SPDX license identifier
  linux/rcupdate: Convert to SPDX license identifier
  linux/rcu_node_tree: Convert to SPDX license identifier
  rcu/update: Convert to SPDX license identifier
  rcu/tree: Convert to SPDX license identifier
  rcu/tiny: Convert to SPDX license identifier
  rcu/sync: Convert to SPDX license identifier
  rcu/srcu: Convert to SPDX license identifier
  rcu/rcutorture: Convert to SPDX license identifier
  rcu/rcu_segcblist: Convert to SPDX license identifier
  rcu/rcuperf: Convert to SPDX license identifier
  rcu/rcu.h: Convert to SPDX license identifier
  RCU/torture.txt: Remove section MODULE PARAMETERS
  ...
2019-03-05 14:49:11 -08:00
Kees Cook
89a9684ea1 LSM: Ignore "security=" when "lsm=" is specified
To avoid potential confusion, explicitly ignore "security=" when "lsm=" is
used on the command line, and report that it is happening.

Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2019-02-25 15:22:48 -08:00
Dmitry Torokhov
7bae0432a6 usb: core: add option of only authorizing internal devices
On Chrome OS we want to use USBguard to potentially limit access to USB
devices based on policy. We however to do not want to wait for userspace to
come up before initializing fixed USB devices to not regress our boot
times.

This patch adds option to instruct the kernel to only authorize devices
connected to the internal ports. Previously we could either authorize
all or none (or, by default, we'd only authorize wired devices).

The behavior is controlled via usbcore.authorized_default command line
option.

Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-22 09:27:55 +01:00
David S. Miller
3313da8188 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The netfilter conflicts were rather simple overlapping
changes.

However, the cls_tcindex.c stuff was a bit more complex.

On the 'net' side, Cong is fixing several races and memory
leaks.  Whilst on the 'net-next' side we have Vlad adding
the rtnl-ness support.

What I've decided to do, in order to resolve this, is revert the
conversion over to using a workqueue that Cong did, bringing us back
to pure RCU.  I did it this way because I believe that either Cong's
races don't apply with have Vlad did things, or Cong will have to
implement the race fix slightly differently.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15 12:38:38 -08:00
Feng Tang
1ea61b68d0 async: Add cmdline option to specify drivers to be async probed
Asynchronous driver probing can help much on kernel fastboot, and
this option can provide a flexible way to optimize and quickly verify
async driver probe.

Also it will help in below cases:
* Some driver actually covers several families of HWs, some of which
  could use async probing while others don't. So we can't simply
  turn on the PROBE_PREFER_ASYNCHRONOUS flag in driver, but use this
  cmdline option, like igb driver async patch discussed at
  https://www.spinics.net/lists/netdev/msg545986.html

* For SOC (System on Chip) with multiple spi or i2c controllers, most
  of the slave spi/i2c devices will be assigned with fixed controller
  number, while async probing may make those controllers get different
  index for each boot, which prevents those controller drivers to be
  async probed. For platforms not using these spi/i2c slave devices,
  they can use this cmdline option to benefit from the async probing.

Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14 10:51:39 +01:00
Ingo Molnar
cae45e1c6c Merge branch 'rcu-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull the latest RCU tree from Paul E. McKenney:

 - Additional cleanups after RCU flavor consolidation
 - Grace-period forward-progress cleanups and improvements
 - Documentation updates
 - Miscellaneous fixes
 - spin_is_locked() conversions to lockdep
 - SPDX changes to RCU source and header files
 - SRCU updates
 - Torture-test updates, including nolibc updates and moving
   nolibc to tools/include

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-13 08:36:18 +01:00
Jeremy Linton
de19055564 Documentation: Document arm64 kpti control
For a while Arm64 has been capable of force enabling
or disabling the kpti mitigations. Lets make sure the
documentation reflects that.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-02-06 17:26:04 -07:00
Otto Sabart
31dcbbefd3 doc: kernel-parameters.txt: fix documentation of elevator parameter
Legacy IO schedulers (cfq, deadline and noop) were removed in
f382fb0bce.

The documentation for deadline was retained because it carries over to
mq-deadline as well, but location of the doc file was changed over time.

The old iosched algorithms were removed from elevator= kernel parameter
and mq-deadline, kyber and bfq were added with a reference to their
documentation.

Fixes: f382fb0bce ("block: remove legacy IO schedulers")
Signed-off-by: Otto Sabart <ottosabart@seberm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-02-06 16:46:07 -07:00
Julien Thierry
bc3c03ccb4 arm64: Enable the support of pseudo-NMIs
Add a build option and a command line parameter to build and enable the
support of pseudo-NMIs.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-02-06 10:06:41 +00:00
Ard Biesheuvel
69c1f396f2 efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation
Move the x86 EFI earlyprintk implementation to a shared location under
drivers/firmware and tweak it slightly so we can expose it as an earlycon
implementation (which is generic) rather than earlyprintk (which is only
implemented for a few architectures)

This also involves switching to write-combine mappings by default (which
is required on ARM since device mappings lack memory semantics, and so
memcpy/memset may not be used on them), and adding support for shared
memory framebuffers on cache coherent non-x86 systems (which do not
tolerate mismatched attributes).

Note that 32-bit ARM does not populate its struct screen_info early
enough for earlycon=efifb to work, so it is disabled there.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190202094119.13230-10-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-04 08:27:30 +01:00
Martin Kepplinger
3fc46fc9f6 ipconfig: add carrier_timeout kernel parameter
commit 3fb72f1e6e ("ipconfig wait for carrier") added a
"wait for carrier" policy, with a fixed worst case maximum wait
of two minutes.

Now make the wait for carrier timeout configurable on the kernel
commandline and use the 120s as the default.

The timeout messages introduced with
commit 5e404cd658 ("ipconfig: add informative timeout messages while
waiting for carrier") are done in a fixed interval of 20 seconds, just
like they were before (240/12).

Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 15:24:13 -08:00
Lu Baolu
8950dcd83a iommu/vt-d: Leave scalable mode default off
Commit 765b6a98c1 ("iommu/vt-d: Enumerate the scalable
mode capability") enables VT-d scalable mode if hardware
advertises the capability. As we will bring up different
features and use cases to upstream in different patch
series, it will leave some intermediate kernel versions
which support partial features. Hence, end user might run
into problems when they use such kernels on bare metals
or virtualization environments.

This leaves scalable mode default off and end users could
turn it on with "intel-iommu=sm_on" only when they have
clear ideas about which scalable features are supported
in the kernel.

Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-01-30 17:23:58 +01:00
Paul E. McKenney
1a4762b927 doc: Now jiffies_till_sched_qs solicits help from cond_resched()
The rcutree.jiffies_till_sched_qs kernel boot parameter used to solicit
help only from rcu_note_context_switch(), but now also solicits help
from cond_resched().  This commit therefore updates kernel-parameters.txt
accordingly.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-01-25 15:34:17 -08:00
Paul E. McKenney
2ccaff10f7 rcu: Add sysrq rcu_node-dump capability
Life is hard if RCU manages to get stuck without triggering RCU CPU
stall warnings or triggering the rcu_check_gp_start_stall() checks
for failing to start a grace period.  This commit therefore adds a
boot-time-selectable sysrq key (commandeering "y") that allows manually
dumping Tree RCU state.  The new rcutree.sysrq_rcu kernel boot parameter
must be set for this sysrq to be available.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-01-25 15:29:59 -08:00
Kees Cook
79f7865d84 LSM: Introduce "lsm=" for boottime LSM selection
Provide a way to explicitly choose LSM initialization order via the new
"lsm=" comma-separated list of LSMs.

Signed-off-by: Kees Cook <keescook@chromium.org>
2019-01-08 13:18:42 -08:00
Linus Torvalds
b23b0ea370 ARM: SoC: late updates
A few updates that we merged late but are low risk for regressions for
 other platforms (and a few other straggling patches):
 
  - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
    here. They're for a driver for the PL353 SRAM controller and a build
    fix for the qualcomm scm driver.
  - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante
    GPU, 256MB RAM, Wifi). This includes some acked platform-specific
    drivers (serial, etc). This also include DTs for two boards with this
    SoC, OrangePi 2G and OrangePi i86.
  - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
    video playback offload). This is the first i.MX 64-bit SoC.
  - Some minor updates to Samsung boards (adding a few peripherals in
    DTs).
  - Small rework for SMP bootup on STi platforms.
  - A couple of TEE driver fixes.
  - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
    enabled in defconfigs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwv4lAPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3JQsQAIcvwnI8rKPEskd20kNaj5bCUlG2hcIN/VoT
 scq1iCXpICOF53jBQvDoe48n+Ji4mI2VD7AIZD8XVppR+aHgpy8fkjX+uz8Ap0dG
 8B2y9vJ6nomrxKslnFEUk6LxpsaadpzTQDlcHAQvPdJxkvmMuA2b8LMGZhoAQ+dB
 lCw/qbjmoMEAV+dKXqRu62wwjZ10j4B7ex1XB1gnfjJYy+Splnd5fkdFCvd3wk+7
 BOH2iGROyLC0TC6ggqv45NNm6EykO9XqI5nq/3VHq9aBVJVWtFUQhDScjNf6qyYM
 mvUg6ZxmiTyIjhN+erttFXtxSKCH0BIdlBLZzaQ9W2XbTKMgzUlgK5GjQGqKCG6A
 QZHs9oe/TQuaHZ2ghMRbxcTWZC8Zdi1hYYa8fB7yNCZKnPNLRaA5P7O/3/s796B6
 DXpIHlU4lpyRdg26Zxh+FXYIXLsUYk9WNcwhjFbUQ/WXP3L9qf7FUU1EeSQeGDHU
 yRCE+kuKFs5FJnAZYXQ+0BCv0v8GFLMKTXDTbYtVFt0QDWVeeWwRt6gCOcHv1vBI
 IbZ0QLn1fzW2efgsXXB9i9VXO5AiP3EMx2A9Lqvrv+ufRXzQlBPbYZhN/Lp+BuDC
 moWdT5Cmye00uu35wY6H7Ycd+CO29dJ/B+hKbgqjyzFkZJiwWnPoeVQH2M1IkjOj
 IydIEbEo
 =qgZw
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull more ARM SoC updates from Olof Johansson:
 "A few updates that we merged late but are low risk for regressions for
  other platforms (and a few other straggling patches):

   - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
     here. They're for a driver for the PL353 SRAM controller and a
     build fix for the qualcomm scm driver.

   - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
     Vivante GPU, 256MB RAM, Wifi). This includes some acked
     platform-specific drivers (serial, etc). This also include DTs for
     two boards with this SoC, OrangePi 2G and OrangePi i86.

   - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
     video playback offload). This is the first i.MX 64-bit SoC.

   - Some minor updates to Samsung boards (adding a few peripherals in
     DTs).

   - Small rework for SMP bootup on STi platforms.

   - A couple of TEE driver fixes.

   - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
     enabled in defconfigs"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
  arm64: defconfig: Re-enable bcm2835-thermal driver
  MAINTAINERS: Add entry for RDA Micro SoC architecture
  tty: serial: Add RDA8810PL UART driver
  ARM: dts: rda8810pl: Add interrupt support for UART
  dt-bindings: serial: Document RDA Micro UART
  ARM: dts: rda8810pl: Add timer support
  ARM: dts: Add devicetree for OrangePi i96 board
  ARM: dts: Add devicetree for OrangePi 2G IoT board
  ARM: dts: Add devicetree for RDA8810PL SoC
  ARM: Prepare RDA8810PL SoC
  dt-bindings: arm: Document RDA8810PL and reference boards
  dt-bindings: Add RDA Micro vendor prefix
  ARM: sti: remove pen_release and boot_lock
  arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
  arm64: dts: imx8mq-evk: enable watchdog
  arm64: dts: imx8mq: add watchdog devices
  MAINTAINERS: add i.MX8 DT path to i.MX architecture
  arm64: add support for i.MX8M EVK board
  arm64: add basic DTS for i.MX8MQ
  ...
2019-01-05 11:30:37 -08:00
Feng Tang
d999bd9392 panic: add options to print system info when panic happens
Kernel panic issues are always painful to debug, partially because it's
not easy to get enough information of the context when panic happens.

And we have ramoops and kdump for that, while this commit tries to
provide a easier way to show the system info by adding a cmdline
parameter, referring some idea from sysrq handler.

Link: http://lkml.kernel.org/r/1543398842-19295-2-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 13:13:47 -08:00
Linus Torvalds
8e143b90e4 IOMMU Updates for Linux v4.21
Including (in no particular order):
 
 	- Page table code for AMD IOMMU now supports large pages where
 	  smaller page-sizes were mapped before. VFIO had to work around
 	  that in the past and I included a patch to remove it (acked by
 	  Alex Williamson)
 
 	- Patches to unmodularize a couple of IOMMU drivers that would
 	  never work as modules anyway.
 
 	- Work to unify the the iommu-related pointers in
 	  'struct device' into one pointer. This work is not finished
 	  yet, but will probably be in the next cycle.
 
 	- NUMA aware allocation in iommu-dma code
 
 	- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
 
 	- Scalable mode support for the Intel VT-d driver
 
 	- PM runtime improvements for the ARM-SMMU driver
 
 	- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
 
 	- Various smaller fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJcKkEoAAoJECvwRC2XARrjCCoQAJxsgaAF5Z0s7z8j2A9SkaGp
 SIMnUAI5mDOdyhTOAI+eehpRzg5UVYt/JjFYnHz8HWqbSc8YOvDvHafmhMFIwYvO
 hq5knbs6ns2jJNFO+M4dioDq+3THdqkGIF5xoHdGTP7cn9+XyQ8lAoHo0RuL122U
 PJGqX7Cp4XnFP4HMb3uQYhVeBV7mU+XqAdB+4aDnQkzI5LkQCRr74GcqOm+Rlnyc
 cmQWc2arUMjgc1TJIrex8dx9dT6lq8kOmhyEg/IjHeGaZyJ3HqA+30XDDLEExN0G
 MeVawuxJz40HgXlkXr+iZTQtIFYkXdKvJH6rptMbOfbDeDz+YZ01TbtAMMH9o4jX
 yxjjMjdcWTsWYQ/MHHdsoMP34cajCi/EYPMNksbycw+E3Y+X/bSReCoWC0HUK8/+
 Z4TpZ9mZVygtJR+QNZ+pE9oiJpb4sroM10zTnbMoVHNnvfsO01FYk7FMPkolSKLw
 zB4MDswQYgchoFR9Z4ZB4PycYTzeafLKYgDPDoD1vIJgDavuidwvDWDRTDc+aMWM
 siIIewq19To9jDJkVjX4dsT/p99KVKgAR/Ps6jjWkAroha7g6GcmlYZHIJnyop04
 jiaSXUsk8aRucP/CRz5xdMmaGoN7BsNmpUjcrquc6Povk/6gvXvpY04oCs1+gNMX
 ipL9E3GTFCVBubRFrksv
 =DT9A
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - Page table code for AMD IOMMU now supports large pages where smaller
   page-sizes were mapped before. VFIO had to work around that in the
   past and I included a patch to remove it (acked by Alex Williamson)

 - Patches to unmodularize a couple of IOMMU drivers that would never
   work as modules anyway.

 - Work to unify the the iommu-related pointers in 'struct device' into
   one pointer. This work is not finished yet, but will probably be in
   the next cycle.

 - NUMA aware allocation in iommu-dma code

 - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver

 - Scalable mode support for the Intel VT-d driver

 - PM runtime improvements for the ARM-SMMU driver

 - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom

 - Various smaller fixes and improvements

* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
  iommu: Check for iommu_ops == NULL in iommu_probe_device()
  ACPI/IORT: Don't call iommu_ops->add_device directly
  iommu/of: Don't call iommu_ops->add_device directly
  iommu: Consolitate ->add/remove_device() calls
  iommu/sysfs: Rename iommu_release_device()
  dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
  xhci: Use device_iommu_mapped()
  powerpc/iommu: Use device_iommu_mapped()
  ACPI/IORT: Use device_iommu_mapped()
  iommu/of: Use device_iommu_mapped()
  driver core: Introduce device_iommu_mapped() function
  iommu/tegra: Use helper functions to access dev->iommu_fwspec
  iommu/qcom: Use helper functions to access dev->iommu_fwspec
  iommu/of: Use helper functions to access dev->iommu_fwspec
  iommu/mediatek: Use helper functions to access dev->iommu_fwspec
  iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
  iommu/dma: Use helper functions to access dev->iommu_fwspec
  iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
  ACPI/IORT: Use helper functions to access dev->iommu_fwspec
  iommu: Introduce wrappers around dev->iommu_fwspec
  ...
2019-01-01 15:55:29 -08:00
Manivannan Sadhasivam
c10b13325c tty: serial: Add RDA8810PL UART driver
Add UART driver for RDA Micro RDA8810PL SoC.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31 13:10:01 -08:00
Linus Torvalds
3868772b99 A fairly normal cycle for documentation stuff. We have a new
document on perf security, more Italian translations, more
 improvements to the memory-management docs, improvements to the
 pathname lookup documentation, and the usual array of smaller
 fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAlwmSPkPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Y9ZoH/joPnMFykOxS0SmdfI7Z+F4EiJct/ZwF9bHx
 T673T0RC30IgnUXGmBl5OtktfWqVh9aGqHOGwgh65ybp2QvzemdP0k6Lu6RtwNk9
 6LfkpvuUb8FzaQmCHnSMzMSDmXtZUw3Z/mOjCBcQtfGAsUULNT08xl+Dr+gwWIWt
 H+gPEEP+MCXTOQO1jm2dHOHW8NGm6XOijMTpOxp/pkoEY5tUxkVB1T//8EeX7LVh
 c1QHzFrufE3bmmubCLtIuyVqZbm/V5l6rHREDQ46fnH/G9fM4gojzsrAL/Y2m4bt
 E4y0XJHycjLMRDimAnYhbPm1ryTFAX1lNzHP3M/EF6Heqx8YHAk=
 =vtwu
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.0' of git://git.lwn.net/linux

Pull documentation update from Jonathan Corbet:
 "A fairly normal cycle for documentation stuff. We have a new document
  on perf security, more Italian translations, more improvements to the
  memory-management docs, improvements to the pathname lookup
  documentation, and the usual array of smaller fixes.

  As is often the case, there are a few reaches outside of
  Documentation/ to adjust kerneldoc comments"

* tag 'docs-5.0' of git://git.lwn.net/linux: (38 commits)
  docs: improve pathname-lookup document structure
  configfs: fix wrong name of struct in documentation
  docs/mm-api: link slab_common.c to "The Slab Cache" section
  slab: make kmem_cache_create{_usercopy} description proper kernel-doc
  doc:process: add links where missing
  docs/core-api: make mm-api.rst more structured
  x86, boot: documentation whitespace fixup
  Documentation: devres: note checking needs when converting
  doc🇮🇹 add some process/* translations
  doc🇮🇹 fixes in process/1.Intro
  Documentation: convert path-lookup from markdown to resturctured text
  Documentation/admin-guide: update admin-guide index.rst
  Documentation/admin-guide: introduce perf-security.rst file
  scripts/kernel-doc: Fix struct and struct field attribute processing
  Documentation: dev-tools: Fix typos in index.rst
  Correct gen_init_cpio tool's documentation
  Document /proc/pid PID reuse behavior
  Documentation: update path-lookup.md for parallel lookups
  Documentation: Use "while" instead of "whilst"
  dmaengine: Add mailing list address to the documentation
  ...
2018-12-29 11:21:49 -08:00
Linus Torvalds
6f9d71c9c7 Merge branch 'for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:

 - Waiman's cgroup2 cpuset support has been finally merged closing one
   of the last remaining feature gaps.

 - cgroup.procs could show non-leader threads when cgroup2 threaded mode
   was used in certain ways. I forgot to push the fix during the last
   cycle.

 - A patch to fix mount option parsing when all mount options have been
   consumed by someone else (LSM).

 - cgroup_no_v1 boot param can now block named cgroup1 hierarchies too.

* 'for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Add named hierarchy disabling to cgroup_no_v1 boot param
  cgroup: fix parsing empty mount option string
  cpuset: Remove set but not used variable 'cs'
  cgroup: fix CSS_TASK_ITER_PROCS
  cgroup: Add .__DEBUG__. prefix to debug file names
  cpuset: Minor cgroup2 interface updates
  cpuset: Expose cpuset.cpus.subpartitions with cgroup_debug
  cpuset: Add documentation about the new "cpuset.sched.partition" flag
  cpuset: Use descriptive text when reading/writing cpuset.sched.partition
  cpuset: Expose cpus.effective and mems.effective on cgroup v2 root
  cpuset: Make generate_sched_domains() work with partition
  cpuset: Make CPU hotplug work with partition
  cpuset: Track cpusets that use parent's effective_cpus
  cpuset: Add an error state to cpuset.sched.partition
  cpuset: Add new v2 cpuset.sched.partition flag
  cpuset: Simply allocation and freeing of cpumasks
  cpuset: Define data structures to support scheduling partition
  cpuset: Enable cpuset controller in default hierarchy
  cgroup: remove unnecessary unlikely()
2018-12-29 10:57:20 -08:00
Tejun Heo
3fc9c12d27 cgroup: Add named hierarchy disabling to cgroup_no_v1 boot param
It can be useful to inhibit all cgroup1 hierarchies especially during
transition and for debugging.  cgroup_no_v1 can block hierarchies with
controllers which leaves out the named hierarchies.  Expand it to
cover the named hierarchies so that "cgroup_no_v1=all,named" disables
all cgroup1 hierarchies.

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Marcin Pawlowski <mpawlowski@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-12-28 10:34:12 -08:00
Linus Torvalds
8d6973327e powerpc updates for 4.21
Notable changes:
 
  - Mitigations for Spectre v2 on some Freescale (NXP) CPUs.
 
  - A large series adding support for pass-through of Nvidia V100 GPUs to guests
    on Power9.
 
  - Another large series to enable hardware assistance for TLB table walk on
    MPC8xx CPUs.
 
  - Some preparatory changes to our DMA code, to make way for further cleanups
    from Christoph.
 
  - Several fixes for our Transactional Memory handling discovered by fuzzing the
    signal return path.
 
  - Support for generating our system call table(s) from a text file like other
    architectures.
 
  - A fix to our page fault handler so that instead of generating a WARN_ON_ONCE,
    user accesses of kernel addresses instead print a ratelimited and
    appropriately scary warning.
 
  - A cosmetic change to make our unhandled page fault messages more similar to
    other arches and also more compact and informative.
 
  - Freescale updates from Scott:
    "Highlights include elimination of legacy clock bindings use from dts
     files, an 83xx watchdog handler, fixes to old dts interrupt errors, and
     some minor cleanup."
 
 And many clean-ups, reworks and minor fixes etc.
 
 Thanks to:
  Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
  Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter,
  Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David
  Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg
  Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan
  Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal
  Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras,
  Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
  Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell,
  Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcJLwZAAoJEFHr6jzI4aWAAv4P/jMvP52lA90i2E8G72LOVSF1
 33DbE/Okib3VfmmMcXZpgpEfwIcEmJcIj86WWcLWzBfXLunehkgwh+AOfBLwqWch
 D08+RR9EZb7ppvGe91hvSgn4/28CWVKAxuDviSuoE1OK8lOTncu889r2+AxVFZiY
 f6Al9UPlB3FTJonNx8iO4r/GwrPigukjbzp1vkmJJg59LvNUrMQ1Fgf9D3cdlslH
 z4Ff9zS26RJy7cwZYQZI4sZXJZmeQ1DxOZ+6z6FL/nZp/O4WLgpw6C6o1+vxo1kE
 9ZnO/3+zIRhoWiXd6OcOQXBv3NNCjJZlXh9HHAiL8m5ZqbmxrStQWGyKW/jjEZuK
 wVHxfUT19x9Qy1p+BH3XcUNMlxchYgcCbEi5yPX2p9ZDXD6ogNG7sT1+NO+FBTww
 ueCT5PCCB/xWOccQlBErFTMkFXFLtyPDNFK7BkV7uxbH0PQ+9guCvjWfBZti6wjD
 /6NK4mk7FpmCiK13Y1xjwC5OqabxLUYwtVuHYOMr5TOPh8URUPS4+0pIOdoYDM6z
 Ensrq1CC843h59MWADgFHSlZ78FRtZlG37JAXunjLbqGupLOvL7phC9lnwkylHga
 2hWUWFeOV8HFQBP4gidZkLk64pkT9LzqHgdgIB4wUwrhc8r2mMZGdQTq5H7kOn3Q
 n9I48PWANvEC0PBCJ/KL
 =cr6s
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Mitigations for Spectre v2 on some Freescale (NXP) CPUs.

   - A large series adding support for pass-through of Nvidia V100 GPUs
     to guests on Power9.

   - Another large series to enable hardware assistance for TLB table
     walk on MPC8xx CPUs.

   - Some preparatory changes to our DMA code, to make way for further
     cleanups from Christoph.

   - Several fixes for our Transactional Memory handling discovered by
     fuzzing the signal return path.

   - Support for generating our system call table(s) from a text file
     like other architectures.

   - A fix to our page fault handler so that instead of generating a
     WARN_ON_ONCE, user accesses of kernel addresses instead print a
     ratelimited and appropriately scary warning.

   - A cosmetic change to make our unhandled page fault messages more
     similar to other arches and also more compact and informative.

   - Freescale updates from Scott:
       "Highlights include elimination of legacy clock bindings use from
        dts files, an 83xx watchdog handler, fixes to old dts interrupt
        errors, and some minor cleanup."

  And many clean-ups, reworks and minor fixes etc.

  Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan,
  Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao,
  Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel
  Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin,
  Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari
  Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh
  Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen
  N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai,
  Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
  Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen
  Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian
  Tang, Yue Haibing"

* tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits)
  Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask"
  powerpc/zImage: Also check for stdout-path
  powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y
  macintosh: Use of_node_name_{eq, prefix} for node name comparisons
  ide: Use of_node_name_eq for node name comparisons
  powerpc: Use of_node_name_eq for node name comparisons
  powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name
  powerpc/mm: Remove very old comment in hash-4k.h
  powerpc/pseries: Fix node leak in update_lmb_associativity_index()
  powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL
  powerpc/dts/fsl: Fix dtc-flagged interrupt errors
  clk: qoriq: add more compatibles strings
  powerpc/fsl: Use new clockgen binding
  powerpc/83xx: handle machine check caused by watchdog timer
  powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved"
  powerpc/fsl_pci: simplify fsl_pci_dma_set_mask
  arch/powerpc/fsl_rmu: Use dma_zalloc_coherent
  vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver
  vfio_pci: Allow regions to add own capabilities
  vfio_pci: Allow mapping extra regions
  ...
2018-12-27 10:43:24 -08:00
Linus Torvalds
792bf4d871 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The biggest RCU changes in this cycle were:

   - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.

   - Replace calls of RCU-bh and RCU-sched update-side functions to
     their vanilla RCU counterparts. This series is a step towards
     complete removal of the RCU-bh and RCU-sched update-side functions.

     ( Note that some of these conversions are going upstream via their
       respective maintainers. )

   - Documentation updates, including a number of flavor-consolidation
     updates from Joel Fernandes.

   - Miscellaneous fixes.

   - Automate generation of the initrd filesystem used for rcutorture
     testing.

   - Convert spin_is_locked() assertions to instead use lockdep.

     ( Note that some of these conversions are going upstream via their
       respective maintainers. )

   - SRCU updates, especially including a fix from Dennis Krein for a
     bag-on-head-class bug.

   - RCU torture-test updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
  rcutorture: Don't do busted forward-progress testing
  rcutorture: Use 100ms buckets for forward-progress callback histograms
  rcutorture: Recover from OOM during forward-progress tests
  rcutorture: Print forward-progress test age upon failure
  rcutorture: Print time since GP end upon forward-progress failure
  rcutorture: Print histogram of CB invocation at OOM time
  rcutorture: Print GP age upon forward-progress failure
  rcu: Print per-CPU callback counts for forward-progress failures
  rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings
  rcutorture: Dump grace-period diagnostics upon forward-progress OOM
  rcutorture: Prepare for asynchronous access to rcu_fwd_startat
  torture: Remove unnecessary "ret" variables
  rcutorture: Affinity forward-progress test to avoid housekeeping CPUs
  rcutorture: Break up too-long rcu_torture_fwd_prog() function
  rcutorture: Remove cbflood facility
  torture: Bring any extra CPUs online during kernel startup
  rcutorture: Add call_rcu() flooding forward-progress tests
  rcutorture/formal: Replace synchronize_sched() with synchronize_rcu()
  tools/kernel.h: Replace synchronize_sched() with synchronize_rcu()
  net/decnet: Replace rcu_barrier_bh() with rcu_barrier()
  ...
2018-12-26 13:07:19 -08:00
Linus Torvalds
13e1ad2be3 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti updates from Thomas Gleixner:
 "No point in speculating what's in this parcel:

   - Drop the swap storage limit when L1TF is disabled so the full space
     is available

   - Add support for the new AMD STIBP always on mitigation mode

   - Fix a bunch of STIPB typos"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Add support for STIBP always-on preferred mode
  x86/speculation/l1tf: Drop the swap storage limit restriction when l1tf=off
  x86/speculation: Change misspelled STIPB to STIBP
2018-12-25 16:26:42 -08:00
Rafael J. Wysocki
3a56fe685d Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-cpufreq-sched'
* pm-cpuidle:
  cpuidle: Add 'above' and 'below' idle state metrics
  cpuidle: big.LITTLE: fix refcount leak
  cpuidle: Add cpuidle.governor= command line parameter
  cpuidle: poll_state: Disregard disable idle states
  Documentation: admin-guide: PM: Add cpuidle document

* pm-cpufreq:
  cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
  dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings
  cpufreq: nforce2: Remove meaningless return
  cpufreq: ia64: Remove unused header files
  cpufreq: imx6q: save one condition block for normal case of nvmem read
  cpufreq: imx6q: remove unused code
  cpufreq: pmac64: add of_node_put()
  cpufreq: powernv: add of_node_put()
  Documentation: intel_pstate: Clarify coordination of P-State limits
  cpufreq: intel_pstate: Force HWP min perf before offline
  cpufreq: s3c24xx: Change to use DEFINE_SHOW_ATTRIBUTE macro

* pm-cpufreq-sched:
  sched/cpufreq: Add the SPDX tags
2018-12-21 10:06:06 +01:00
Diana Craciun
e59f5bd759 powerpc/fsl: Add FSL_PPC_BOOK3E as supported arch for nospectre_v2 boot arg
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20 22:59:03 +11:00
Joerg Roedel
03ebe48e23 Merge branches 'iommu/fixes', 'arm/renesas', 'arm/mediatek', 'arm/tegra', 'arm/omap', 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next 2018-12-20 10:05:20 +01:00
Rafael J. Wysocki
61cb5758d3 cpuidle: Add cpuidle.governor= command line parameter
Add cpuidle.governor= command line parameter to allow the default
cpuidle governor to be replaced.

That is useful, for example, if someone running a tickful kernel
wants to use the menu governor on it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-11 12:08:44 +01:00
Michal Hocko
5b5e4d623e x86/speculation/l1tf: Drop the swap storage limit restriction when l1tf=off
Swap storage is restricted to max_swapfile_size (~16TB on x86_64) whenever
the system is deemed affected by L1TF vulnerability. Even though the limit
is quite high for most deployments it seems to be too restrictive for
deployments which are willing to live with the mitigation disabled.

We have a customer to deploy 8x 6,4TB PCIe/NVMe SSD swap devices which is
clearly out of the limit.

Drop the swap restriction when l1tf=off is specified. It also doesn't make
much sense to warn about too much memory for the l1tf mitigation when it is
forcefully disabled by the administrator.

[ tglx: Folded the documentation delta change ]

Fixes: 377eeaa8e1 ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: <linux-mm@kvack.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181113184910.26697-1-mhocko@kernel.org
2018-12-11 11:46:13 +01:00
Lu Baolu
765b6a98c1 iommu/vt-d: Enumerate the scalable mode capability
The Intel vt-d spec rev3.0 introduces a new translation
mode called scalable mode, which enables PASID-granular
translations for first level, second level, nested and
pass-through modes. At the same time, the previous
Extended Context (ECS) mode is deprecated (no production
ever implements ECS).

This patch adds enumeration for Scalable Mode and removes
the deprecated ECS enumeration. It provides a boot time
option to disable scalable mode even hardware claims to
support it.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-11 10:45:57 +01:00
Ingo Molnar
4bbfd7467c Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:

- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.

- Replace calls of RCU-bh and RCU-sched update-side functions
  to their vanilla RCU counterparts.  This series is a step
  towards complete removal of the RCU-bh and RCU-sched update-side
  functions.

  ( Note that some of these conversions are going upstream via their
    respective maintainers. )

- Documentation updates, including a number of flavor-consolidation
  updates from Joel Fernandes.

- Miscellaneous fixes.

- Automate generation of the initrd filesystem used for
  rcutorture testing.

- Convert spin_is_locked() assertions to instead use lockdep.

  ( Note that some of these conversions are going upstream via their
    respective maintainers. )

- SRCU updates, especially including a fix from Dennis Krein
  for a bag-on-head-class bug.

- RCU torture-test updates.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-04 07:52:30 +01:00
Paul E. McKenney
fc6f9c5778 rcutorture: Remove cbflood facility
Now that the forward-progress code does a full-bore continuous callback
flood lasting multiple seconds, there is little point in also posting a
mere 60,000 callbacks every second or so.  This commit therefore removes
the old cbflood testing.  Over time, it may be desirable to concurrently
do full-bore continuous callback floods on all CPUs simultaneously, but
one dragon at a time.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-12-01 12:45:33 -08:00
Linus Torvalds
4b78317679 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull STIBP fallout fixes from Thomas Gleixner:
 "The performance destruction department finally got it's act together
  and came up with a cure for the STIPB regression:

   - Provide a command line option to control the spectre v2 user space
     mitigations. Default is either seccomp or prctl (if seccomp is
     disabled in Kconfig). prctl allows mitigation opt-in, seccomp
     enables the migitation for sandboxed processes.

   - Rework the code to handle the conditional STIBP/IBPB control and
     remove the now unused ptrace_may_access_sched() optimization
     attempt

   - Disable STIBP automatically when SMT is disabled

   - Optimize the switch_to() logic to avoid MSR writes and invocations
     of __switch_to_xtra().

   - Make the asynchronous speculation TIF updates synchronous to
     prevent stale mitigation state.

  As a general cleanup this also makes retpoline directly depend on
  compiler support and removes the 'minimal retpoline' option which just
  pretended to provide some form of security while providing none"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  x86/speculation: Provide IBPB always command line options
  x86/speculation: Add seccomp Spectre v2 user space protection mode
  x86/speculation: Enable prctl mode for spectre_v2_user
  x86/speculation: Add prctl() control for indirect branch speculation
  x86/speculation: Prepare arch_smt_update() for PRCTL mode
  x86/speculation: Prevent stale SPEC_CTRL msr content
  x86/speculation: Split out TIF update
  ptrace: Remove unused ptrace_may_access_sched() and MODE_IBRS
  x86/speculation: Prepare for conditional IBPB in switch_mm()
  x86/speculation: Avoid __switch_to_xtra() calls
  x86/process: Consolidate and simplify switch_to_xtra() code
  x86/speculation: Prepare for per task indirect branch speculation control
  x86/speculation: Add command line control for indirect branch speculation
  x86/speculation: Unify conditional spectre v2 print functions
  x86/speculataion: Mark command line parser data __initdata
  x86/speculation: Mark string arrays const correctly
  x86/speculation: Reorder the spec_v2 code
  x86/l1tf: Show actual SMT state
  x86/speculation: Rework SMT state change
  sched/smt: Expose sched_smt_present static key
  ...
2018-12-01 12:35:48 -08:00
Johannes Weiner
e0c274472d psi: make disabling/enabling easier for vendor kernels
Mel Gorman reports a hackbench regression with psi that would prohibit
shipping the suse kernel with it default-enabled, but he'd still like
users to be able to opt in at little to no cost to others.

With the current combination of CONFIG_PSI and the psi_disabled bool set
from the commandline, this is a challenge.  Do the following things to
make it easier:

1. Add a config option CONFIG_PSI_DEFAULT_DISABLED that allows distros
   to enable CONFIG_PSI in their kernel but leave the feature disabled
   unless a user requests it at boot-time.

   To avoid double negatives, rename psi_disabled= to psi=.

2. Make psi_disabled a static branch to eliminate any branch costs
   when the feature is disabled.

In terms of numbers before and after this patch, Mel says:

: The following is a comparision using CONFIG_PSI=n as a baseline against
: your patch and a vanilla kernel
:
:                          4.20.0-rc4             4.20.0-rc4             4.20.0-rc4
:                 kconfigdisable-v1r1                vanilla        psidisable-v1r1
: Amean     1       1.3100 (   0.00%)      1.3923 (  -6.28%)      1.3427 (  -2.49%)
: Amean     3       3.8860 (   0.00%)      4.1230 *  -6.10%*      3.8860 (  -0.00%)
: Amean     5       6.8847 (   0.00%)      8.0390 * -16.77%*      6.7727 (   1.63%)
: Amean     7       9.9310 (   0.00%)     10.8367 *  -9.12%*      9.9910 (  -0.60%)
: Amean     12     16.6577 (   0.00%)     18.2363 *  -9.48%*     17.1083 (  -2.71%)
: Amean     18     26.5133 (   0.00%)     27.8833 *  -5.17%*     25.7663 (   2.82%)
: Amean     24     34.3003 (   0.00%)     34.6830 (  -1.12%)     32.0450 (   6.58%)
: Amean     30     40.0063 (   0.00%)     40.5800 (  -1.43%)     41.5087 (  -3.76%)
: Amean     32     40.1407 (   0.00%)     41.2273 (  -2.71%)     39.9417 (   0.50%)
:
: It's showing that the vanilla kernel takes a hit (as the bisection
: indicated it would) and that disabling PSI by default is reasonably
: close in terms of performance for this particular workload on this
: particular machine so;

Link: http://lkml.kernel.org/r/20181127165329.GA29728@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30 14:56:14 -08:00
Linus Torvalds
a1b3cf6d94 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Misc fixes:

   - counter freezing related regression fix

   - uprobes race fix

   - Intel PMU unusual event combination fix

   - .. and diverse tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  uprobes: Fix handle_swbp() vs. unregister() + register() race once more
  perf/x86/intel: Disallow precise_ip on BTS events
  perf/x86/intel: Add generic branch tracing check to intel_pmu_has_bts()
  perf/x86/intel: Move branch tracing setup to the Intel-specific source file
  perf/x86/intel: Fix regression by default disabling perfmon v4 interrupt handling
  perf tools beauty ioctl: Support new ISO7816 commands
  tools uapi asm-generic: Synchronize ioctls.h
  tools arch x86: Update tools's copy of cpufeatures.h
  tools headers uapi: Synchronize i915_drm.h
  perf tools: Restore proper cwd on return from mnt namespace
  tools build feature: Check if get_current_dir_name() is available
  perf tools: Fix crash on synthesizing the unit
2018-11-30 11:31:48 -08:00
Thomas Gleixner
55a974021e x86/speculation: Provide IBPB always command line options
Provide the possibility to enable IBPB always in combination with 'prctl'
and 'seccomp'.

Add the extra command line options and rework the IBPB selection to
evaluate the command instead of the mode selected by the STIPB switch case.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185006.144047038@linutronix.de
2018-11-28 11:57:14 +01:00
Thomas Gleixner
6b3e64c237 x86/speculation: Add seccomp Spectre v2 user space protection mode
If 'prctl' mode of user space protection from spectre v2 is selected
on the kernel command-line, STIBP and IBPB are applied on tasks which
restrict their indirect branch speculation via prctl.

SECCOMP enables the SSBD mitigation for sandboxed tasks already, so it
makes sense to prevent spectre v2 user space to user space attacks as
well.

The Intel mitigation guide documents how STIPB works:
    
   Setting bit 1 (STIBP) of the IA32_SPEC_CTRL MSR on a logical processor
   prevents the predicted targets of indirect branches on any logical
   processor of that core from being controlled by software that executes
   (or executed previously) on another logical processor of the same core.

Ergo setting STIBP protects the task itself from being attacked from a task
running on a different hyper-thread and protects the tasks running on
different hyper-threads from being attacked.

While the document suggests that the branch predictors are shielded between
the logical processors, the observed performance regressions suggest that
STIBP simply disables the branch predictor more or less completely. Of
course the document wording is vague, but the fact that there is also no
requirement for issuing IBPB when STIBP is used points clearly in that
direction. The kernel still issues IBPB even when STIBP is used until Intel
clarifies the whole mechanism.

IBPB is issued when the task switches out, so malicious sandbox code cannot
mistrain the branch predictor for the next user space task on the same
logical processor.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185006.051663132@linutronix.de
2018-11-28 11:57:14 +01:00
Thomas Gleixner
7cc765a67d x86/speculation: Enable prctl mode for spectre_v2_user
Now that all prerequisites are in place:

 - Add the prctl command line option

 - Default the 'auto' mode to 'prctl'

 - When SMT state changes, update the static key which controls the
   conditional STIBP evaluation on context switch.

 - At init update the static key which controls the conditional IBPB
   evaluation on context switch.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185005.958421388@linutronix.de
2018-11-28 11:57:13 +01:00
Thomas Gleixner
fa1202ef22 x86/speculation: Add command line control for indirect branch speculation
Add command line control for user space indirect branch speculation
mitigations. The new option is: spectre_v2_user=

The initial options are:

    -  on:   Unconditionally enabled
    - off:   Unconditionally disabled
    -auto:   Kernel selects mitigation (default off for now)

When the spectre_v2= command line argument is either 'on' or 'off' this
implies that the application to application control follows that state even
if a contradicting spectre_v2_user= argument is supplied.

Originally-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185005.082720373@linutronix.de
2018-11-28 11:57:10 +01:00
Peter Zijlstra
2a5bf23d5b perf/x86/intel: Fix regression by default disabling perfmon v4 interrupt handling
Kyle Huey reported that 'rr', a replay debugger, broke due to the following commit:

  af3bdb991a ("perf/x86/intel: Add a separate Arch Perfmon v4 PMI handler")

Rework the 'disable_counter_freezing' __setup() parameter such that we
can explicitly enable/disable it and switch to default disabled.

To this purpose, rename the parameter to "perf_v4_pmi=" which is a much
better description and allows requiring a bool argument.

[ mingo: Improved the changelog some more. ]

Reported-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert O'Callahan <robert@ocallahan.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/20181120170842.GZ2131@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-20 18:57:48 +01:00
Will Deacon
806654a966 Documentation: Use "while" instead of "whilst"
Whilst making an unrelated change to some Documentation, Linus sayeth:

  | Afaik, even in Britain, "whilst" is unusual and considered more
  | formal, and "while" is the common word.
  |
  | [...]
  |
  | Can we just admit that we work with computers, and we don't need to
  | use þe eald Englisc spelling of words that most of the world never
  | uses?

dictionary.com refers to the word as "Chiefly British", which is
probably an undesirable attribute for technical documentation.

Replace all occurrences under Documentation/ with "while".

Cc: David Howells <dhowells@redhat.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-11-20 09:30:43 -07:00
Paul E. McKenney
ed8f6fb247 doc: Document rcutorture forward-progress test kernel parameters
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-11-12 08:56:25 -08:00
Kai-Heng Feng
781f0766cc USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub
Devices connected under Terminus Technology Inc. Hub (1a40:0101) may
fail to work after the system resumes from suspend:
[  206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd
[  206.143691] usb 3-2.4: device descriptor read/64, error -32
[  206.351671] usb 3-2.4: device descriptor read/64, error -32

Info for this hub:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480 MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1a40 ProdID=0101 Rev=01.11
S:  Product=USB 2.0 Hub
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

Some expirements indicate that the USB devices connected to the hub are
innocent, it's the hub itself is to blame. The hub needs extra delay
time after it resets its port.

Hence wait for extra delay, if the device is connected to this quirky
hub.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07 13:23:18 +01:00
Laurence Oberman
1129505552 watchdog/core: Add watchdog_thresh command line parameter
The hard and soft lockup detector threshold has a default value of 10
seconds which can only be changed via sysctl.

During early boot lockup detection can trigger when noisy debugging emits
a large amount of messages to the console, but there is no way to set a
larger threshold on the kernel command line. The detector can only be
completely disabled.

Add a new watchdog_thresh= command line parameter to allow boot time
control over the threshold. It works in the same way as the sysctl and
affects both the soft and the hard lockup detectors.

Signed-off-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: rdunlap@infradead.org
Cc: prarit@redhat.com
Link: https://lkml.kernel.org/r/1541079018-13953-1-git-send-email-loberman@redhat.com
2018-11-01 14:33:35 +01:00
Ingo Molnar
4b783dd6a4 Merge branches 'x86/early-printk', 'x86/microcode' and 'core/objtool' into x86/urgent, to pick up simple topic branches
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-29 07:13:09 +01:00
Linus Torvalds
345671ea0f Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - a few misc things

 - ocfs2 updates

 - most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
  hugetlbfs: dirty pages as they are added to pagecache
  mm: export add_swap_extent()
  mm: split SWP_FILE into SWP_ACTIVATED and SWP_FS
  tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE
  mm: thp: relocate flush_cache_range() in migrate_misplaced_transhuge_page()
  mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page()
  mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition
  mm/kasan/quarantine.c: make quarantine_lock a raw_spinlock_t
  mm/gup: cache dev_pagemap while pinning pages
  Revert "x86/e820: put !E820_TYPE_RAM regions into memblock.reserved"
  mm: return zero_resv_unavail optimization
  mm: zero remaining unavailable struct pages
  tools/testing/selftests/vm/gup_benchmark.c: add MAP_HUGETLB option
  tools/testing/selftests/vm/gup_benchmark.c: add MAP_SHARED option
  tools/testing/selftests/vm/gup_benchmark.c: allow user specified file
  tools/testing/selftests/vm/gup_benchmark.c: fix 'write' flag usage
  mm/gup_benchmark.c: add additional pinning methods
  mm/gup_benchmark.c: time put_page()
  mm: don't raise MEMCG_OOM event due to failed high-order allocation
  mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock
  ...
2018-10-26 19:33:41 -07:00
Alexander Duyck
f682a97a00 mm: provide kernel parameter to allow disabling page init poisoning
Patch series "Address issues slowing persistent memory initialization", v5.

The main thing this patch set achieves is that it allows us to initialize
each node worth of persistent memory independently.  As a result we reduce
page init time by about 2 minutes because instead of taking 30 to 40
seconds per node and going through each node one at a time, we process all
4 nodes in parallel in the case of a 12TB persistent memory setup spread
evenly over 4 nodes.

This patch (of 3):

On systems with a large amount of memory it can take a significant amount
of time to initialize all of the page structs with the PAGE_POISON_PATTERN
value.  I have seen it take over 2 minutes to initialize a system with
over 12TB of RAM.

In order to work around the issue I had to disable CONFIG_DEBUG_VM and
then the boot time returned to something much more reasonable as the
arch_add_memory call completed in milliseconds versus seconds.  However in
doing that I had to disable all of the other VM debugging on the system.

In order to work around a kernel that might have CONFIG_DEBUG_VM enabled
on a system that has a large amount of memory I have added a new kernel
parameter named "vm_debug" that can be set to "-" in order to disable it.

Link: http://lkml.kernel.org/r/20180925201921.3576.84239.stgit@localhost.localdomain
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:34 -07:00
Linus Torvalds
685f7e4f16 powerpc updates for 4.20
Notable changes:
 
  - A large series to rewrite our SLB miss handling, replacing a lot of fairly
    complicated asm with much fewer lines of C.
 
  - Following on from that, we now maintain a cache of SLB entries for each
    process and preload them on context switch. Leading to a 27% speedup for our
    context switch benchmark on Power9.
 
  - Improvements to our handling of SLB multi-hit errors. We now print more debug
    information when they occur, and try to continue running by flushing the SLB
    and reloading, rather than treating them as fatal.
 
  - Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
 
  - Add support for physical memory up to 2PB in the linear mapping on 64-bit
    Book3S. We only support up to 512TB as regular system memory, otherwise the
    percpu allocator runs out of vmalloc space.
 
  - Add stack protector support for 32 and 64-bit, with a per-task canary.
 
  - Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
 
  - Support recognising "big cores" on Power9, where two SMT4 cores are presented
    to us as a single SMT8 core.
 
  - A large series to cleanup some of our ioremap handling and PTE flags.
 
  - Add a driver for the PAPR SCM (storage class memory) interface, allowing
    guests to operate on SCM devices (acked by Dan).
 
  - Changes to our ftrace code to handle very large kernels, where we need to use
    a trampoline to get to ftrace_caller().
 
 Many other smaller enhancements and cleanups.
 
 Thanks to:
   Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton Blanchard, Aravinda
   Prasad, Bartlomiej Zolnierkiewicz, Benjamin Herrenschmidt, Breno Leitao,
   Cédric Le Goater, Christophe Leroy, Christophe Lombard, Dan Carpenter, Daniel
   Axtens, Finn Thain, Gautham R. Shenoy, Gustavo Romero, Haren Myneni, Hari
   Bathini, Jia Hongtao, Joel Stanley, John Allen, Laurent Dufour, Madhavan
   Srinivasan, Mahesh Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael
   Bringmann, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
   Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran,
   Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab, Rob Herring, Sam
   Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan Johnson, Stephen Rothwell,
   Stewart Smith, Suraj Jitindar Singh, Tyrel Datwyler, Vaibhav Jain, Vasant
   Hegde, YueHaibing, zhong jiang,
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb01vTAAoJEFHr6jzI4aWADsEP/jqL3+2qxs098ra80tpXCpXJ
 tgXCosEs4b35sGtyHeUWZZZfWXeisaPAIlP8zTx1n50HACZduDYRAl0Ew9XB7Xdw
 enDHRVccD21FsmHBOx/Ii1rVJlovWlj6EQCWHKeZmNjeRoFuClVZ7CYmf+mBifKR
 sw2Db2fKA/59wMTq2zIMy5pqYgqlAs4jTWS6uN5hKPoBmO/82ARnNG+qgLuloD3Z
 O8zSDM9QQ7PpuyDgTjO9SAo2YjmEfXlEG6cOCCejsU3DMctaEAK5PUZ+blsHYHBH
 BYZYKs/x4pcw0SO41GtTh0M2YqDYBVuBIpRw8lLZap97Xo9ucSkAm5WD3rGxk4CY
 YeZKEPUql6MHN3+DKl8mx2F0V+Et/tio2HNqc9KReR1tfoolZAbe+SFZHfgmc/Rq
 RD9nnG8KRd4K2K1BTqpkTmI1EtE7jPtPJPSV8gMGhgL/N5vPmH3mql/qyOtYx48E
 6/hPzWESgs16VRZ/opLh8VvjlY1HBDODQhehhhl+o23/Vb8qEgRf8Uqhq50rQW1H
 EeOqyyYQ90txSU31Sgy1kQkvOgIFAsBObWT1ZCJ3RbfGbB4/tdEAvZqTZRlXo2OY
 7P0Sqcw/9Le5eJkHIlLtBv0TF7y1OYemCbLgRQzFlcRP+UKtYyg8eFnFjqbPEEmP
 ulwhn/BfFVSgaYKQ503u
 =I0pj
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - A large series to rewrite our SLB miss handling, replacing a lot of
     fairly complicated asm with much fewer lines of C.

   - Following on from that, we now maintain a cache of SLB entries for
     each process and preload them on context switch. Leading to a 27%
     speedup for our context switch benchmark on Power9.

   - Improvements to our handling of SLB multi-hit errors. We now print
     more debug information when they occur, and try to continue running
     by flushing the SLB and reloading, rather than treating them as
     fatal.

   - Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).

   - Add support for physical memory up to 2PB in the linear mapping on
     64-bit Book3S. We only support up to 512TB as regular system
     memory, otherwise the percpu allocator runs out of vmalloc space.

   - Add stack protector support for 32 and 64-bit, with a per-task
     canary.

   - Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.

   - Support recognising "big cores" on Power9, where two SMT4 cores are
     presented to us as a single SMT8 core.

   - A large series to cleanup some of our ioremap handling and PTE
     flags.

   - Add a driver for the PAPR SCM (storage class memory) interface,
     allowing guests to operate on SCM devices (acked by Dan).

   - Changes to our ftrace code to handle very large kernels, where we
     need to use a trampoline to get to ftrace_caller().

  And many other smaller enhancements and cleanups.

  Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton
  Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin
  Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy,
  Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham
  R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao,
  Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh
  Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann,
  Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
  Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver
  O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab,
  Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan
  Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel
  Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang"

* tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits)
  Revert "selftests/powerpc: Fix out-of-tree build errors"
  powerpc/msi: Fix compile error on mpc83xx
  powerpc: Fix stack protector crashes on CPU hotplug
  powerpc/traps: restore recoverability of machine_check interrupts
  powerpc/64/module: REL32 relocation range check
  powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd
  selftests/powerpc: Add a test of wild bctr
  powerpc/mm: Fix page table dump to work on Radix
  powerpc/mm/radix: Display if mappings are exec or not
  powerpc/mm/radix: Simplify split mapping logic
  powerpc/mm/radix: Remove the retry in the split mapping logic
  powerpc/mm/radix: Fix small page at boundary when splitting
  powerpc/mm/radix: Fix overuse of small pages in splitting logic
  powerpc/mm/radix: Fix off-by-one in split mapping logic
  powerpc/ftrace: Handle large kernel configs
  powerpc/mm: Fix WARN_ON with THP NUMA migration
  selftests/powerpc: Fix out-of-tree build errors
  powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected
  powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64
  powerpc/time: isolate scaled cputime accounting in dedicated functions.
  ...
2018-10-26 14:36:21 -07:00
Linus Torvalds
d1f2b1710d IOMMU Updates for Linux v4.20
These updates bring:
 
 	- Debugfs support for the Intel VT-d driver. When enabled, it
 	  now also exposes some of its internal data structures to
 	  user-space for debugging purposes.
 
 	- ARM-SMMU driver now uses the generic deferred flushing
 	  and fast-path iova allocation code. This is expected to be a
 	  major performance improvement, as this allocation path scales
 	  a lot better.
 
 	- Support for r8a7744 in the Renesas iommu driver
 
 	- Couple of minor fixes and improvements all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJb0vixAAoJECvwRC2XARrj0lkQALur432cGae8225gLNG+Ab1B
 lDGz/8uJeV4V552r58msq/yFpVascoMYOCgS+5N5J/jn5UiPnWxk//Uz2lvvCsFn
 3Z4HswSbmNLSuEHmN3/1CK28An44LjYxtnH/zAEaHRJgWNmC05lO4glPXaSIBwVS
 ve6ULymHJittCHFNNAstNBvMYirYV2y+FYxoq6EteTuCruNNXR78KQV7TqPYI+uZ
 0DwaXUyxO+HZbVeLpOnj/WHZ6+EUY0cHwHuk8U6ZCHnINZ+k9knt+WUvYu7wPCtj
 jGIyJXW5BG0rjJZnVUQs9BFXFSJLV2Ap8M3zKVIyFAUAyStEtGHct0YMRC29GX/J
 e45GPbElAZqx1NWRGGTV0xTsH5Gn85S2nP3p7iiPhj5zUhX/6SreZBDQdC+brtsB
 8HG85xohsUkVmRq/ez4hu0yqXtB66ppV7TcOjyixybG+ixRPtUwTbiaYUxbvkZTr
 hcYUVLGcpJX463VjUKGoRPFL/jZ6BXUWdLVllZPYgDT+IBXtQx1TB20DDtj5V2mR
 3m7B0xLQJDWdarhdA9Oj0FQj7ivmwmitcJ9EoNvHSRdEoE1iIy1vHv/7v/GokRVS
 J1YT5ZYAsGHBgZIsL7FpVA37i9t3JPVvgakUV/ZfLDyG3v+P0+eS3gNhECYt5luS
 D8G7Jy+2vsitO/ZCyu/r
 =q1HJ
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - Debugfs support for the Intel VT-d driver.

   When enabled, it now also exposes some of its internal data
   structures to user-space for debugging purposes.

 - ARM-SMMU driver now uses the generic deferred flushing and fast-path
   iova allocation code.

   This is expected to be a major performance improvement, as this
   allocation path scales a lot better.

 - Support for r8a7744 in the Renesas iommu driver

 - Couple of minor fixes and improvements all over the place

* tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
  iommu/arm-smmu-v3: Remove unnecessary wrapper function
  iommu/arm-smmu-v3: Add SPDX header
  iommu/amd: Add default branch in amd_iommu_capable()
  dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support
  iommu/amd: Move iommu_init_pci() to .init section
  iommu/arm-smmu: Support non-strict mode
  iommu/io-pgtable-arm-v7s: Add support for non-strict mode
  iommu/arm-smmu-v3: Add support for non-strict mode
  iommu/io-pgtable-arm: Add support for non-strict mode
  iommu: Add "iommu.strict" command line option
  iommu/dma: Add support for non-strict mode
  iommu/arm-smmu: Ensure that page-table updates are visible before TLBI
  iommu/arm-smmu-v3: Implement flush_iotlb_all hook
  iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations
  iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout
  iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
  iommu/arm-smmu-v3: Fix a couple of minor comment typos
  iommu: Fix a typo
  iommu: Remove .domain_{get,set}_windows
  iommu: Tidy up window attributes
  ...
2018-10-26 10:50:10 -07:00
Linus Torvalds
9703fc8caf USB/PHY patches for 4.20-rc1
Here is the big USB/PHY driver patches for 4.20-rc1
 
 Lots of USB changes in here, primarily in these areas:
   - typec updates and new drivers
   - new PHY drivers
   - dwc2 driver updates and additions (this old core keeps getting added
     to new devices.)
   - usbtmc major update based on the industry group coming together and
     working to add new features and performance to the driver.
   - USB gadget additions for new features
   - USB gadget configfs updates
   - chipidea driver updates
   - other USB gadget updates
   - USB serial driver updates
   - renesas driver updates
   - xhci driver updates
   - other tiny USB driver updates
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9LlHw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymnvwCffYmMWyMG9zSOw1oSzFPl7TVN1hYAoMyJqzLg
 umyLwWxC9ZWWkrpc3iD8
 =ux+Y
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver patches for 4.20-rc1

  Lots of USB changes in here, primarily in these areas:

   - typec updates and new drivers

   - new PHY drivers

   - dwc2 driver updates and additions (this old core keeps getting
     added to new devices.)

   - usbtmc major update based on the industry group coming together and
     working to add new features and performance to the driver.

   - USB gadget additions for new features

   - USB gadget configfs updates

   - chipidea driver updates

   - other USB gadget updates

   - USB serial driver updates

   - renesas driver updates

   - xhci driver updates

   - other tiny USB driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits)
  usb: phy: ab8500: silence some uninitialized variable warnings
  usb: xhci: tegra: Add genpd support
  usb: xhci: tegra: Power-off power-domains on removal
  usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten
  usbip: tools: fix atoi() on non-null terminated string
  USB: misc: appledisplay: fix backlight update_status return code
  phy: phy-pxa-usb: add a new driver
  usb: host: add DT bindings for faraday fotg2
  usb: host: ohci-at91: fix request of irq for optional gpio
  usb/early: remove set but not used variable 'remain_length'
  usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc
  usb: typec: tcpm: Report back negotiated PPS voltage and current
  USB: core: remove set but not used variable 'udev'
  usb: core: fix memory leak on port_dev_path allocation
  USB: net2280: Remove ->disconnect() callback from net2280_pullup()
  usb: dwc2: disable power_down on rockchip devices
  usb: gadget: udc: renesas_usb3: add support for r8a77990
  dt-bindings: usb: renesas_usb3: add bindings for r8a77990
  usb: gadget: udc: renesas_usb3: Add r8a774a1 support
  USB: serial: cypress_m8: remove set but not used variable 'iflag'
  ...
2018-10-26 08:14:13 -07:00
Linus Torvalds
01aa9d518e This is a fairly typical cycle for documentation. There's some welcome
readability improvements for the formatted output, some LICENSES updates
 including the addition of the ISC license, the removal of the unloved and
 unmaintained 00-INDEX files, the deprecated APIs document from Kees, more
 MM docs from Mike Rapoport, and the usual pile of typo fixes and
 corrections.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbztcuAAoJEI3ONVYwIuV6nTAP/0Be+5dNPGJmSnb/RbkwBuBV
 zAFVUj2sx4lZlRmWRZ0r7AOef2eSw3IvwBix/vnmllYCVahjp+BdRbhXQAijjyeb
 FWWjOH50/J+BaxSthAINiLRLvuoe0D/M08OpmXQfRl5q0S8RufeV3BDtEABx9j2n
 IICPGTl8LpPUgSMA4cw8zPhHdauhZpbmL2mGE9LXZ27SJT4S8lcHMwyPU1n5S+Jd
 ChEz5g9dYr3GNxFp712pkI5GcVL3tP2nfoVwK7EuGf1tvSnEnn2kzac8QgMqorIh
 xB2+Sh4XIUCbHYpGHpxIniD+WI4voNr/E7STQioJK5o2G4HTuxLjktvTezNF8paa
 hgNHWjPQBq0OOCdM/rsffONFF2J/v/r7E3B+kaRg8pE0uZWTFaDMs6MVaL2fL4Ls
 DrFhi90NJI/Fs7uB4sriiviShAhwboiSIRXJi4VlY/5oFJKHFgqes+R7miU+zTX3
 2qv0k4mWZXWDV9w1piPxSCZSdRzaoYSoxEihX+tnYpCyEcYd9ovW/X1Uhl/wCWPl
 Ft+Op6rkHXRXVfZzTLuF6PspZ4Udpw2PUcnA5zj5FRDDBsjSMFR31c19IFbCeiNY
 kbTIcqejJG1WbVrAK4LCcFyVSGxbrr281eth4rE06cYmmsz3kJy1DB6Lhyg/2vI0
 I8K9ZJ99n1RhPJIcburB
 =C0wt
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.20' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "This is a fairly typical cycle for documentation. There's some welcome
  readability improvements for the formatted output, some LICENSES
  updates including the addition of the ISC license, the removal of the
  unloved and unmaintained 00-INDEX files, the deprecated APIs document
  from Kees, more MM docs from Mike Rapoport, and the usual pile of typo
  fixes and corrections"

* tag 'docs-4.20' of git://git.lwn.net/linux: (41 commits)
  docs: Fix typos in histogram.rst
  docs: Introduce deprecated APIs list
  kernel-doc: fix declaration type determination
  doc: fix a typo in adding-syscalls.rst
  docs/admin-guide: memory-hotplug: remove table of contents
  doc: printk-formats: Remove bogus kobject references for device nodes
  Documentation: preempt-locking: Use better example
  dm flakey: Document "error_writes" feature
  docs/completion.txt: Fix a couple of punctuation nits
  LICENSES: Add ISC license text
  LICENSES: Add note to CDDL-1.0 license that it should not be used
  docs/core-api: memory-hotplug: add some details about locking internals
  docs/core-api: rename memory-hotplug-notifier to memory-hotplug
  docs: improve readability for people with poorer eyesight
  yama: clarify ptrace_scope=2 in Yama documentation
  docs/vm: split memory hotplug notifier description to Documentation/core-api
  docs: move memory hotplug description into admin-guide/mm
  doc: Fix acronym "FEKEK" in ecryptfs
  docs: fix some broken documentation references
  iommu: Fix passthrough option documentation
  ...
2018-10-24 18:01:11 +01:00
Linus Torvalds
638820d8da Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "In this patchset, there are a couple of minor updates, as well as some
  reworking of the LSM initialization code from Kees Cook (these prepare
  the way for ordered stackable LSMs, but are a valuable cleanup on
  their own)"

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  LSM: Don't ignore initialization failures
  LSM: Provide init debugging infrastructure
  LSM: Record LSM name in struct lsm_info
  LSM: Convert security_initcall() into DEFINE_LSM()
  vmlinux.lds.h: Move LSM_TABLE into INIT_DATA
  LSM: Convert from initcall to struct lsm_info
  LSM: Remove initcall tracing
  LSM: Rename .security_initcall section to .lsm_info
  vmlinux.lds.h: Avoid copy/paste of security_init section
  LSM: Correctly announce start of LSM initialization
  security: fix LSM description location
  keys: Fix the use of the C++ keyword "private" in uapi/linux/keyctl.h
  seccomp: remove unnecessary unlikely()
  security: tomoyo: Fix obsolete function
  security/capabilities: remove check for -EINVAL
2018-10-24 11:49:35 +01:00
Linus Torvalds
f682a7920b Merge branch 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt updates from Ingo Molnar:
 "Two main changes:

   - Remove no longer used parts of the paravirt infrastructure and put
     large quantities of paravirt ops under a new config option
     PARAVIRT_XXL=y, which is selected by XEN_PV only. (Joergen Gross)

   - Enable PV spinlocks on Hyperv (Yi Sun)"

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hyperv: Enable PV qspinlock for Hyper-V
  x86/hyperv: Add GUEST_IDLE_MSR support
  x86/paravirt: Clean up native_patch()
  x86/paravirt: Prevent redefinition of SAVE_FLAGS macro
  x86/xen: Make xen_reservation_lock static
  x86/paravirt: Remove unneeded mmu related paravirt ops bits
  x86/paravirt: Move the Xen-only pv_mmu_ops under the PARAVIRT_XXL umbrella
  x86/paravirt: Move the pv_irq_ops under the PARAVIRT_XXL umbrella
  x86/paravirt: Move the Xen-only pv_cpu_ops under the PARAVIRT_XXL umbrella
  x86/paravirt: Move items in pv_info under PARAVIRT_XXL umbrella
  x86/paravirt: Introduce new config option PARAVIRT_XXL
  x86/paravirt: Remove unused paravirt bits
  x86/paravirt: Use a single ops structure
  x86/paravirt: Remove clobbers from struct paravirt_patch_site
  x86/paravirt: Remove clobbers parameter from paravirt patch functions
  x86/paravirt: Make paravirt_patch_call() and paravirt_patch_jmp() static
  x86/xen: Add SPDX identifier in arch/x86/xen files
  x86/xen: Link platform-pci-unplug.o only if CONFIG_XEN_PVHVM
  x86/xen: Move pv specific parts of arch/x86/xen/mmu.c to mmu_pv.c
  x86/xen: Move pv irq related functions under CONFIG_XEN_PV umbrella
2018-10-23 17:54:58 +01:00
Linus Torvalds
c05f3642f4 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "The main updates in this cycle were:

   - Lots of perf tooling changes too voluminous to list (big perf trace
     and perf stat improvements, lots of libtraceevent reorganization,
     etc.), so I'll list the authors and refer to the changelog for
     details:

       Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter
       Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven
       Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas
       Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir
       Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa.

     ... with the bulk of the changes written by Jiri Olsa, Tzvetomir
     Stoyanov and Arnaldo Carvalho de Melo.

   - Continued intel_rdt work with a focus on playing well with perf
     events. This also imported some non-perf RDT work due to
     dependencies. (Reinette Chatre)

   - Implement counter freezing for Arch Perfmon v4 (Skylake and newer).
     This allows to speed up the PMI handler by avoiding unnecessary MSR
     writes and make it more accurate. (Andi Kleen)

   - kprobes cleanups and simplification (Masami Hiramatsu)

   - Intel Goldmont PMU updates (Kan Liang)

   - ... plus misc other fixes and updates"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits)
  kprobes/x86: Use preempt_enable() in optimized_callback()
  x86/intel_rdt: Prevent pseudo-locking from using stale pointers
  kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack
  perf/x86/intel: Export mem events only if there's PEBS support
  x86/cpu: Drop pointless static qualifier in punit_dev_state_show()
  x86/intel_rdt: Fix initial allocation to consider CDP
  x86/intel_rdt: CBM overlap should also check for overlap with CDP peer
  x86/intel_rdt: Introduce utility to obtain CDP peer
  tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file
  tools lib traceevent: Separate out tep_strerror() for strerror_r() issues
  perf python: More portable way to make CFLAGS work with clang
  perf python: Make clang_has_option() work on Python 3
  perf tools: Free temporary 'sys' string in read_event_files()
  perf tools: Avoid double free in read_event_file()
  perf tools: Free 'printk' string in parse_ftrace_printk()
  perf tools: Cleanup trace-event-info 'tdata' leak
  perf strbuf: Match va_{add,copy} with va_end
  perf test: S390 does not support watchpoints in test 22
  perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG
  tools include: Adopt linux/bits.h
  ...
2018-10-23 13:32:18 +01:00
Kees Cook
9b8c7c1405 LSM: Provide init debugging infrastructure
Booting with "lsm.debug" will report future details on how LSM ordering
decisions are being made.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-10-10 20:40:22 -07:00
Yi Sun
3a025de64b x86/hyperv: Enable PV qspinlock for Hyper-V
Implement the required wait and kick callbacks to support PV spinlocks in
Hyper-V guests.

[ tglx: Document the requirement for disabling interrupts in the wait()
  	callback. Remove goto and unnecessary includes. Add prototype
	for hv_vcpu_is_preempted(). Adapted to pending paravirt changes. ]

Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
Cc: chao.p.peng@intel.com
Cc: chao.gao@intel.com
Cc: isaku.yamahata@intel.com
Cc: tianyu.lan@microsoft.com
Link: https://lkml.kernel.org/r/1538987374-51217-3-git-send-email-yi.y.sun@linux.intel.com
2018-10-09 14:21:39 +02:00
Christophe Leroy
d90fe2acd9 powerpc: Wire up memtest
Add call to early_memtest() so that kernel compiled with
CONFIG_MEMTEST really perform memtest at startup when requested
via 'memtest' boot parameter.

Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03 16:12:47 +10:00
Zeng Tao
bd0e6c9614 usb: hub: try old enumeration scheme first for high speed devices
The new scheme is required just to support legacy low and full-speed
devices. For high speed devices, it will slower the enumeration speed.
So in this patch we try the "old" enumeration scheme first for high speed
devices, and this is what Windows does since Windows 8.

Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 12:05:30 -07:00