The driver can't be loaded automatically because it misses
module alias to be provided. Add corresponding MODULE_DEVICE_TABLE()
call to the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Current AMD's zen-based APUs use this core for some of its i2c-buses.
With this patch we re-enable autodetection of hwmon-alike devices, so
lm-sensors will be able to work automatically.
It does not affect the boot-time of embedded devices, as the class is
set based on the DMI information.
DMI is probed only on Qtechnology QT5222 Industrial Camera Platform.
DocLink: https://qtec.com/camera-technology-camera-platforms/
Fixes: 3eddad96c4 ("i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller"")
Signed-off-by: Ricardo Ribalda <ribalda@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck
low, this differs to the PCA9564 which uses 90h for this indication.
Treat either 0x78 or 0x90 as an indication that the SCL line is stuck.
Based on looking through the PCA9564 and PCA9665 datasheets this should
be safe for both chips. The PCA9564 should not return 0x78 for any valid
state and the PCA9665 should not return 0x90.
Fixes: eff9ec95ef ("i2c-algo-pca: Add PCA9665 support")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
-----BEGIN PGP SIGNATURE-----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=laR3
-----END PGP SIGNATURE-----
Merge tag '5.8-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Eight cifs/smb3 fixes, most when specifying the multiuser mount flag.
Five of the fixes are for stable"
* tag '5.8-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: prevent truncation from long to int in wait_for_free_credits
cifs: Fix the target file was deleted when rename failed.
SMB3: Honor 'posix' flag for multiuser mounts
SMB3: Honor 'handletimeout' flag for multiuser mounts
SMB3: Honor lease disabling for multiuser mounts
SMB3: Honor persistent/resilient handle flags for multiuser mounts
SMB3: Honor 'seal' flag for multiuser mounts
cifs: Display local UID details for SMB sessions in DebugData
Accumulated hwmon patches:
- Fix typo in Kconfig SENSORS_IR35221 option
- Fix potential memory leak in acpi_power_meter_add()
- Make sure the OVERT mask is set correctly in max6697 driver
- In PMBus core, fix page vs. register when accessing fans
- Mark is_visible functions static in bt1-pvt driver
- Define Temp- and Volt-to-N poly as maybe-unused in bt1-pvt driver
-----BEGIN PGP SIGNATURE-----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=3guP
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix typo in Kconfig SENSORS_IR35221 option
- Fix potential memory leak in acpi_power_meter_add()
- Make sure the OVERT mask is set correctly in max6697 driver
- In PMBus core, fix page vs. register when accessing fans
- Mark is_visible functions static in bt1-pvt driver
- Define Temp- and Volt-to-N poly as maybe-unused in bt1-pvt driver
* tag 'hwmon-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus) fix a typo in Kconfig SENSORS_IR35221 option
hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add()
hwmon: (max6697) Make sure the OVERT mask is set correctly
hwmon: (pmbus) Fix page vs. register when accessing fans
hwmon: (bt1-pvt) Mark is_visible functions static
hwmon: (bt1-pvt) Define Temp- and Volt-to-N poly as maybe-unused
Merge misc fixes from Andrew Morton:
"Subsystems affected by this patch series: mm/hugetlb, samples, mm/cma,
mm/vmalloc, mm/pagealloc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/page_alloc: fix documentation error
vmalloc: fix the owner argument for the new __vmalloc_node_range callers
mm/cma.c: use exact_nid true to fix possible per-numa cma leak
samples/vfs: avoid warning in statx override
mm/hugetlb.c: fix pages per hugetlb calculation
When I increased the upper bound of the min_free_kbytes value in
ee8eb9a5fe ("mm/page_alloc: increase default min_free_kbytes bound") I
forgot to tweak the above comment to reflect the new value. This patch
fixes that mistake.
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Fabrizio D'Angelo <fdangelo@redhat.com>
Link: http://lkml.kernel.org/r/20200624221236.29560-1-jsavitz@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the recently added new __vmalloc_node_range callers to pass the
correct values as the owner for display in /proc/vmallocinfo.
Fixes: 800e26b813 ("x86/hyperv: allocate the hypercall page with only read and execute bits")
Fixes: 10d5e97c1b ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Fixes: 7a0e27b2a0 ("mm: remove vmalloc_exec")
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200627075649.2455097-1-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Calling cma_declare_contiguous_nid() with false exact_nid for per-numa
reservation can easily cause cma leak and various confusion. For example,
mm/hugetlb.c is trying to reserve per-numa cma for gigantic pages. But it
can easily leak cma and make users confused when system has memoryless
nodes.
In case the system has 4 numa nodes, and only numa node0 has memory. if
we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4
different numa nodes. since exact_nid=false in current code, all 4 numa
nodes will get cma successfully from node0, but hugetlb_cma[1 to 3] will
never be available to hugepage will only allocate memory from
hugetlb_cma[0].
In case the system has 4 numa nodes, both numa node0&2 has memory, other
nodes have no memory. if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c
will get 4 cma areas for 4 different numa nodes. since exact_nid=false in
current code, all 4 numa nodes will get cma successfully from node0 or 2,
but hugetlb_cma[1] and [3] will never be available to hugepage as
mm/hugetlb.c will only allocate memory from hugetlb_cma[0] and
hugetlb_cma[2]. This causes permanent leak of the cma areas which are
supposed to be used by memoryless node.
Of cource we can workaround the issue by letting mm/hugetlb.c scan all cma
areas in alloc_gigantic_page() even node_mask includes node0 only. that
means when node_mask includes node0 only, we can get page from
hugetlb_cma[1] to hugetlb_cma[3]. But this will cause kernel crash in
free_gigantic_page() while it wants to free page by:
cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order)
On the other hand, exact_nid=false won't consider numa distance, it might
be not that useful to leverage cma areas on remote nodes. I feel it is
much simpler to make exact_nid true to make everything clear. After that,
memoryless nodes won't be able to reserve per-numa CMA from other nodes
which have memory.
Fixes: cf11e85fc0 ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andreas Schaufler <andreas.schaufler@gmx.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200628074345.27228-1-song.bao.hua@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Something changed recently to uncover this warning:
samples/vfs/test-statx.c:24:15: warning: `struct foo' declared inside parameter list will not be visible outside of this definition or declaration
24 | #define statx foo
| ^~~
Which is due the use of "struct statx" (here, "struct foo") in a function
prototype argument list before it has been defined:
int
# 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h"
foo
# 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4
(int __dirfd, const char *__restrict __path, int __flags,
unsigned int __mask, struct
# 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h"
foo
# 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4
*__restrict __buf)
__attribute__ ((__nothrow__ , __leaf__)) __attribute__ ((__nonnull__ (2, 5)));
Add explicit struct before #include to avoid warning.
Fixes: f1b5618e01 ("vfs: Add a sample program for the new mount API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/202006282213.C516EA6@keescook
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The routine hpage_nr_pages() was incorrectly used to calculate the number
of base pages in a hugetlb page. hpage_nr_pages is designed to be called
for THP pages and will return HPAGE_PMD_NR for hugetlb pages of any size.
Due to the context in which hpage_nr_pages was called, it is unlikely to
produce a user visible error. The routine with the incorrect call is only
exercised in the case of hugetlb memory error or migration. In addition,
this would need to be on an architecture which supports huge page sizes
less than PMD_SIZE. And, the vma containing the huge page would also need
to smaller than PMD_SIZE.
Fixes: c0d0381ade ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200629185003.97202-1-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix a use-after-free bug when the fs shuts down.
-----BEGIN PGP SIGNATURE-----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=BnJO
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"Fix a use-after-free bug when the fs shuts down"
* tag 'xfs-5.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix use-after-free on CIL context on shutdown
-----BEGIN PGP SIGNATURE-----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=ydSI
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Fix a pcie_find_root_port() simplification that broke power management
because it didn't handle the edge case of finding the Root Port of a
Root Port itself (Mika Westerberg)""
* tag 'pci-v5.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Make pcie_find_root_port() work for Root Ports
Add a new device ID for Intel Tiger Lake to the DPTF battery
participant driver (Srinivas Pandruvada) and fix the Tiger Lake
fan device ID (Sumeet Pawnikar).
-----BEGIN PGP SIGNATURE-----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=Ej8d
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"Add a new device ID for Intel Tiger Lake to the DPTF battery
participant driver (Srinivas Pandruvada) and fix the Tiger Lake fan
device ID (Sumeet Pawnikar)"
* tag 'acpi-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: fan: Fix Tiger Lake ACPI device ID
ACPI: DPTF: Add battery participant for TigerLake
-----BEGIN PGP SIGNATURE-----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=GQwd
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.8-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"
* tag 'gfs2-v5.8-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: The freeze glock should never be frozen
gfs2: When freezing gfs2, use GL_EXACT and not GL_NOCACHE
gfs2: read-only mounts should grab the sd_freeze_gl glock
gfs2: freeze should work on read-only mounts
gfs2: eliminate GIF_ORDERED in favor of list_empty
gfs2: Don't sleep during glock hash walk
gfs2: fix trans slab error when withdraw occurs inside log_flush
gfs2: Don't return NULL from gfs2_inode_lookup
dma-buf:
- fix a use-after-free bug
amdgpu:
- Fix for vega20 boards without RAS support
- DC bandwidth revalidation fix
- Fix Renoir vram info fetching
- Fix hwmon freq printing
i915:
- GVT fixes
- Two missed MMIO handler fixes for SKL/CFL
- Fix mask register bits check
- Fix one lockdep error for debugfs entry access
- Include asm sources for render cache clear batches
msm:
- memleak fix
- display block fix
- address space fixes
exynos:
- error value and reference count fix
- error print removal
sun4i:
- remove HPD polling
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJe/o1wAAoJEAx081l5xIa+gcIP/2kcJpWJJmln+YhwP983/D0/
brnlxiUdayAm7qH7+k3Pdy1CQgdCQqMGQzTE28BpgfTFMGRXh+ae3XPx/QHlYXdU
iekzLAppkobM/lRDFRc8IuVrzYFAKydgCoDXTLpQLCY5Ts4V0DgsvI2x1aWndrif
OW2dm1d/q+YL3QtRXgeNKRctn2j0Zskppk2cgAfL4jXr2ko9qY4okUD4t/2fBgVM
6ngpwaYGFtLWZbDiei5OZ6MMNcvddl70bd5l9DZZ/n1SFjQ/kASW4hAUefOoajzQ
w3Z3GFfzU8+1ytzPmqyKo97PEiR5rJfUzo+6p6l3i42EqoD5r404F2meSoCafc3u
v8UZcyK1UftE6bUgWBIfMf9qh6uznhvTuPcT2kbyf2GfzH7a7A8DWUHJUFTCFdB5
eLS6FYqGzPTYOWog/z/CLbBVZ6UBzkWlsSfXGn2PlfspEOjA9fTseh60kauDU4ei
NmsCUKJoorkf7TecSI5M+DmMMDlGTPVjyeOMkxgGUkme1Kj3omcC6ZTPgKhdCblb
coRroc1Xj60h5aGZCnfIzKRyF3BVPvrKNXJSxnBqzQ4BPvjpehWW1fsmC1QTROes
BIL/RuBDZq4NJJDtR5QF52y6VeoWgewoeRkuWivUUnecbmanoTfE11x9apZ0Bvqv
m4qhFiaXJ+jCLhAvjyLU
=gG8C
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-07-03' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Pretty usual rc4 pull: two usual amdgpu, i915 pulls, and some misc arm
driver fixes.
The bigger bit is including the asm sources for some GPU shaders that
were contained in the i915 driver, otherwise it's pretty much business
as usual.
dma-buf:
- fix a use-after-free bug
amdgpu:
- Fix for vega20 boards without RAS support
- DC bandwidth revalidation fix
- Fix Renoir vram info fetching
- Fix hwmon freq printing
i915:
- GVT fixes
- Two missed MMIO handler fixes for SKL/CFL
- Fix mask register bits check
- Fix one lockdep error for debugfs entry access
- Include asm sources for render cache clear batches
msm:
- memleak fix
- display block fix
- address space fixes
exynos:
- error value and reference count fix
- error print removal
sun4i:
- remove HPD polling"
* tag 'drm-fixes-2020-07-03' of git://anongit.freedesktop.org/drm/drm: (22 commits)
drm/amdgpu: use %u rather than %d for sclk/mclk
drm/amdgpu/atomfirmware: fix vram_info fetching for renoir
drm/amd/display: Only revalidate bandwidth on medium and fast updates
drm: sun4i: hdmi: Remove extra HPD polling
drm/i915: Include asm sources for {ivb, hsw}_clear_kernel.c
drm/exynos: fix ref count leak in mic_pre_enable
drm/exynos: Properly propagate return value in drm_iommu_attach_device()
drm/exynos: Remove dev_err() on platform_get_irq() failure
drm/amd/powerplay: Fix NULL dereference in lock_bus() on Vega20 w/o RAS
dma-buf: Move dma_buf_release() from fops to dentry_ops
drm/msm: Fix up the rest of the messed up address sizes
drm/msm: Fix setup of a6xx create_address_space.
drm/msm: Fix address space size after refactor.
drm/i915/gvt: Use GFP_ATOMIC instead of GFP_KERNEL in atomic context
drm/i915/gvt: Fix incorrect check of enabled bits in mask registers
drm/i915/gvt: Fix two CFL MMIO handling caused by regression.
drm/i915/gvt: Add one missing MMIO handler for D_SKL_PLUS
drm/msm: Fix 0xfffflub in "Refactor address space initialization"
drm/msm/dpu: allow initialization of encoder locks during encoder init
drm/msm/dpu: fix error return code in dpu_encoder_init
...
This error path returned directly instead of calling sysctl_head_finish().
Fixes: ef9d965bc8 ("sysctl: reject gigantic reads/write to sysctl files")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
KRYO4XX silver/LITTLE CPU cores with revision r1p0 are affected by
erratum 1530923 and 1024718, so add them to the respective list.
The variant and revision bits are implementation defined and are
different from the their Cortex CPU counterparts on which they are
based on, i.e., r1p0 is equivalent to rdpe.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/7013e8a3f857ca7e82863cc9e34a614293d7f80c.1593539394.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
KRYO4XX gold/big CPU core revisions r0p0 to r3p1 are affected by
erratum 1463225 and 1418040, so add them to the respective list.
The variant and revision bits are implementation defined and are
different from the their Cortex CPU counterparts on which they are
based on, i.e., (r0p0 to r3p1) is equivalent to (rcpe to rfpf).
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/83780e80c6377c12ca51b5d53186b61241685e49.1593539394.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
Before this patch, some gfs2 code locked the freeze glock with LM_FLAG_NOEXP
(Do not freeze) flag, and some did not. We never want to freeze the freeze
glock, so this patch makes it consistently use LM_FLAG_NOEXP always.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, the freeze code in gfs2 specified GL_NOCACHE in
several places. That's wrong because we always want to know the state
of whether the file system is frozen.
There was also a problem with freeze/thaw transitioning the glock from
frozen (EX) to thawed (SH) because gfs2 will normally grant glocks in EX
to processes that request it in SH mode, unless GL_EXACT is specified.
Therefore, the freeze/thaw code, which tried to reacquire the glock in
SH mode would get the glock in EX mode, and miss the transition from EX
to SH. That made it think the thaw had completed normally, but since the
glock was still cached in EX, other nodes could not freeze again.
This patch removes the GL_NOCACHE flag to allow the freeze glock to be
cached. It also adds the GL_EXACT flag so the glock is fully transitioned
from EX to SH, thereby allowing future freeze operations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.
This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function freeze_go_sync, called when promoting
the freeze glock, was testing for the SDF_JOURNAL_LIVE superblock flag.
That's only set for read-write mounts. Read-only mounts don't use a
journal, so the bit is never set, so the freeze never happened.
This patch removes the check for SDF_JOURNAL_LIVE for freeze requests
but still checks it when deciding whether to flush a journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In several places, we used the GIF_ORDERED inode flag to determine
if an inode was on the ordered writes list. However, since we always
held the sd_ordered_lock spin_lock during the manipulation, we can
just as easily check list_empty(&ip->i_ordered) instead.
This allows us to keep more than one ordered writes list to make
journal writing improvements.
This patch eliminates GIF_ORDERED in favor of checking list_empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Two critical mm related fixes that affect booting of m68k/ColdFire devices.
Both fix problems caused by recent system init memblock changes.
-----BEGIN PGP SIGNATURE-----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=odtP
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu mm fixes from Greg Ungerer:
"Two critical mm related fixes that affect booting of m68k/ColdFire
devices.
Both fix problems caused by recent system init memblock changes"
* tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: mm: fix node memblock init
m68k: nommu: register start of the memory with memblock
- Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
warnings
- Various fixes for DT binding check warnings
- A couple of build fixes/improvements for binding checks
- ReST formatting improvements for writing-schema.rst
- Document reference fixes
-----BEGIN PGP SIGNATURE-----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=/l5U
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
warnings
- Various fixes for DT binding check warnings
- A couple of build fixes/improvements for binding checks
- ReST formatting improvements for writing-schema.rst
- Document reference fixes
* tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: clock: imx: Fix e-mail address
dt-bindings: thermal: k3: Fix the reg property
dt-bindings: thermal: Remove soc unit address
dt-bindings: display: arm: versatile: Pass the sysreg unit name
dt-bindings: usb: aspeed: Remove the leading zeroes
dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
dt-bindings: mailbox: zynqmp_ipi: fix unit address
dt-bindings: bus: uniphier-system-bus: fix warning in example
scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
doc: devicetree: bindings: fix spelling mistake
docs: dt: minor adjustments at writing-schema.rst
dt: fix reference to olpc,xo1.75-ec.txt
dt: Fix broken references to renamed docs
dt: fix broken links due to txt->yaml renames
dt: update a reference for reneases pcar file renamed to yaml
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXv20ggAKCRCRxhvAZXjc
osYAAQD4Lp5ORPJv5jtYScxRM1RiUh8hp2MBle+4iYCAQX/UowD/QtMPtiLWaMIw
6bMMBAj1gVBmlIOmu7DhBs8hVtKugQY=
=kNpi
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull data race annotation from Christian Brauner:
"This contains an annotation patch for a data race in copy_process()
reported by KCSAN when reading and writing nr_threads.
The data race is intentional and benign. This is obvious from the
comment above the relevant code and based on general consensus when
discussing this issue. So simply using data_race() to annotate this as
an intentional race seems the best option"
* tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fork: annotate data race in copy_process()
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCXv4UMCAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0kq/AQDC9w/N2eKgCl1S
uxALoPLsc2W5OITMQP/aDQuayd+hWAEA9WYajToL4wP55q23xS3w1fd70lkX58cH
vbP64TyofgI=
=B4wJ
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"These are just fixes for bugs found lately.
All of them are small scale things here and there, and all of them are
for previous kernel releases (the oldest appeared in v2.6.17)"
* tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm_tis: Remove the HID IFX0102
tpm_tis_spi: Prefer async probe
tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes
tpm/st33zp24: fix spelling mistake "drescription" -> "description"
tpm_tis: extra chip->ops check on error path in tpm_tis_core_init
tpm_tis_spi: Don't send anything during flow control
tpm: Fix TIS locality timeout problems
This kselftest fixes update for Linux 5.8-rc4 consists of tpm test
fixes from arkko Sakkinen.
-----BEGIN PGP SIGNATURE-----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=RDv/
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"tpm test fixes from Jarkko Sakkinen"
* tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tpm: Use /bin/sh instead of /bin/bash
selftests: tpm: Use 'test -e' instead of 'test -f'
Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
This kunit fixes update for Linux 5.8-rc4 consists of fixes to build
and run-times failures. Also includes troubleshooting tips updates
to kunit user documentation.
-----BEGIN PGP SIGNATURE-----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=XeG4
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan
"Fixes for build and run-times failures.
Also includes troubleshooting tips updates to kunit user
documentation"
* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Add some troubleshooting tips to the FAQ
kunit: kunit_tool: Fix invalid result when build fails
kunit: show error if kunit results are not present
kunit: kunit_config: Fix parsing of CONFIG options with space
leak and a module unloading bug in the /proc/fs/nfsd/clients/ code, and
a compile warning.
-----BEGIN PGP SIGNATURE-----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=wF3M
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Fixes for a umask bug on exported filesystems lacking ACL support, a
leak and a module unloading bug in the /proc/fs/nfsd/clients/ code,
and a compile warning"
* tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
nfsd: fix nfsdfs inode reference count leak
nfsd4: fix nfsdfs reference count loop
nfsd: apply umask on fs without ACL support
Fix a typo in SENSORS_IR35221 option: module name should be "ir35221"
instead of "ir35521".
Fixes: 8991ebd9c9 ("hwmon: (pmbus) Add client driver for IR35221")
Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Link: https://lore.kernel.org/r/20200702221349.18139-1-rentao.bupt@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-----BEGIN PGP SIGNATURE-----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=4lvI
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"One fix in here, for a regression in 5.7 where a task is waiting in
the kernel for a condition, but that condition won't become true until
task_work is run. And the task_work can't be run exactly because the
task is waiting in the kernel, so we'll never make any progress.
One example of that is registering an eventfd and queueing io_uring
work, and then the task goes and waits in eventfd read with the
expectation that it'll get woken (and read an event) when the io_uring
request completes. The io_uring request is finished through task_work,
which won't get run while the task is looping in eventfd read"
* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
Today xenbus_map_ring_valloc() can return either a negative errno
value (-ENOMEM or -EINVAL) or a grant status value. This is a mess as
e.g -ENOMEM and GNTST_eagain have the same numeric value.
Fix that by turning all grant mapping errors into -ENOENT. This is
no problem as all callers of xenbus_map_ring_valloc() only use the
return value to print an error message, and in case of mapping errors
the grant status value has already been printed by __xenbus_map_ring()
before.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200701121638.19840-3-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
xenbus_map_ring_valloc() and its sub-functions are putting quite large
structs and arrays on the stack. This is problematic at runtime, but
might also result in build failures (e.g. with clang due to the option
-Werror,-Wframe-larger-than=... used).
Fix that by moving most of the data from the stack into a dynamically
allocated struct. Performance is no issue here, as
xenbus_map_ring_valloc() is used only when adding a new PV device to
a backend driver.
While at it move some duplicated code from pv/hvm specific mapping
functions to the single caller.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200701121638.19840-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Fix sparse build warning:
block/bio-integrity.c:27:6: warning:
symbol '__bio_integrity_free' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe fixes from Christoph.
* 'nvme-5.8' of git://git.infradead.org/nvme:
nvme: fix a crash in nvme_mpath_add_disk
nvme: fix identify error status silent ignore
Acer C720 running Linux v5.3 reports this in klog:
tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis tpm_tis: Could not get TPM timeouts and durations
tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis 00:08: Could not get TPM timeouts and durations
ima: No TPM chip found, activating TPM-bypass!
tpm_inf_pnp 00:08: Found TPM with ID IFX0102
% git --no-pager grep IFX0102 drivers/char/tpm
drivers/char/tpm/tpm_infineon.c: {"IFX0102", 0},
drivers/char/tpm/tpm_tis.c: {"IFX0102", 0}, /* Infineon */
Obviously IFX0102 was added to the HID table for the TCG TIS driver by
mistake.
Fixes: 93e1b7d42e ("[PATCH] tpm: add HID module parameter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877
Cc: stable@vger.kernel.org
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Reported-by: Ferry Toth: <ferry.toth@elsinga.info>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
On a Chromebook I'm working on I noticed a big (~1 second) delay
during bootup where nothing was happening. Right around this big
delay there were messages about the TPM:
[ 2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2
[ 3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ...
I put a few printouts in and saw that tpm_tis_spi_init() (specifically
tpm_chip_register() in that function) was taking the lion's share of
this time, though ~115 ms of the time was in cr50_print_fw_version().
Let's make a one-line change to prefer async probe for tpm_tis_spi.
There's no reason we need to block other drivers from probing while we
load.
NOTES:
* It's possible that other hardware runs through the init sequence
faster than Cr50 and this isn't such a big problem for them.
However, even if they are faster they are still doing _some_
transfers over a SPI bus so this should benefit everyone even if to
a lesser extent.
* It's possible that there are extra delays in the code that could be
optimized out. I didn't dig since once I enabled async probe they
no longer impacted me.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The tpm2_get_cc_attrs_tbl() call will result in TPM commands being issued,
which will need the use of the internal command/response buffer. But,
we're issuing this *before* we've waited to make sure that buffer is
allocated.
This can result in intermittent failures to probe if the hypervisor / TPM
implementation doesn't respond quickly enough. I find it fails almost
every time with an 8 vcpu guest under KVM with software emulated TPM.
To fix it, just move the tpm2_get_cc_attrs_tlb() call after the
existing code to wait for initialization, which will ensure the buffer
is allocated.
Fixes: 18b3670d79 ("tpm: ibmvtpm: Add support for TPM2")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Trivial fix, the spelling of "drescription" is incorrect
in function comment.
Fix this.
Signed-off-by: Binbin Zhou <zhoubinbin@uniontech.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Found by smatch:
drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn:
variable dereferenced before check 'chip->ops' (see line 979)
'chip->ops' is assigned in the beginning of function
in tpmm_chip_alloc->tpm_chip_alloc
and is used before first possible goto to error path.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
During flow control we are just reading from the TPM, yet our spi_xfer
has the tx_buf and rx_buf both non-NULL which means we're requesting a
full duplex transfer.
SPI is always somewhat of a full duplex protocol anyway and in theory
the other side shouldn't really be looking at what we're sending it
during flow control, but it's still a bit ugly to be sending some
"random" data when we shouldn't.
The default tpm_tis_spi_flow_control() tries to address this by
setting 'phy->iobuf[0] = 0'. This partially avoids the problem of
sending "random" data, but since our tx_buf and rx_buf both point to
the same place I believe there is the potential of us sending the
TPM's previous byte back to it if we hit the retry loop.
Another flow control implementation, cr50_spi_flow_control(), doesn't
address this at all.
Let's clean this up and just make the tx_buf NULL before we call
flow_control(). Not only does this ensure that we're not sending any
"random" bytes but it also possibly could make the SPI controller
behave in a slightly more optimal way.
NOTE: no actual observed problems are fixed by this patch--it's was
just made based on code inspection.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
It has been reported that some TIS based TPMs are giving unexpected
errors when using the O_NONBLOCK path of the TPM device. The problem
is that some TPMs don't like it when you get and then relinquish a
locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without
sending a command. This currently happens all the time in the
O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops()
further down the code to after the O_NONBLOCK determination is made.
This is safe because the priv->buffer_mutex still protects the priv
state being modified.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275
Fixes: d23d124843 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Mario Limonciello <Mario.Limonciello@dell.com>
Tested-by: Alex Guzman <alex@guzman.io>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When building very large kernels, the logic that emits replacement
sequences for alternatives fails when relative branches are present
in the code that is emitted into the .altinstr_replacement section
and patched in at the original site and fixed up. The reason is that
the linker will insert veneers if relative branches go out of range,
and due to the relative distance of the .altinstr_replacement from
the .text section where its branch targets usually live, veneers
may be emitted at the end of the .altinstr_replacement section, with
the relative branches in the sequence pointed at the veneers instead
of the actual target.
The alternatives patching logic will attempt to fix up the branch to
point to its original target, which will be the veneer in this case,
but given that the patch site is likely to be far away as well, it
will be out of range and so patching will fail. There are other cases
where these veneers are problematic, e.g., when the target of the
branch is in .text while the patch site is in .init.text, in which
case putting the replacement sequence inside .text may not help either.
So let's use subsections to emit the replacement code as closely as
possible to the patch site, to ensure that veneers are only likely to
be emitted if they are required at the patch site as well, in which
case they will be in range for the replacement sequence both before
and after it is transported to the patch site.
This will prevent alternative sequences in non-init code from being
released from memory after boot, but this is tolerable given that the
entire section is only 512 KB on an allyesconfig build (which weighs in
at 500+ MB for the entire Image). Also, note that modules today carry
the replacement sequences in non-init sections as well, and any of
those that target init code will be emitted into init sections after
this change.
This fixes an early crash when booting an allyesconfig kernel on a
system where any of the alternatives sequences containing relative
branches are activated at boot (e.g., ARM64_HAS_PAN on TX2)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave P Martin <dave.martin@arm.com>
Link: https://lore.kernel.org/r/20200630081921.13443-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
For private namespaces ns->head_disk is NULL, so add a NULL check
before updating the BDI capabilities.
Fixes: b2ce4d9069 ("nvme-multipath: set bdi capabilities once")
Reported-by: Avinash M N <Avinash.M.N@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
