Commit Graph

6 Commits

Author SHA1 Message Date
Jessica Yu
d4c3e6e1b1 livepatch/x86: apply alternatives and paravirt patches after relocations
Implement arch_klp_init_object_loaded() for x86, which applies
alternatives/paravirt patches. This fixes the order in which relocations
and alternatives/paravirt patches are applied.

Previously, if a patch module had alternatives or paravirt patches,
these were applied first by the module loader before livepatch can apply
per-object relocations. The (buggy) sequence of events was:

(1) Load patch module
(2) Apply alternatives and paravirt patches to patch module
    * Note that these are applied to the new functions in the patch module
(3) Apply per-object relocations to patch module when target module loads.
    * This clobbers what was written in step 2

This lead to crashes and corruption in general, since livepatch would
overwrite or step on previously applied alternative/paravirt patches.
The correct sequence of events should be:

(1) Load patch module
(2) Apply per-object relocations to patch module
(3) Apply alternatives and paravirt patches to patch module

This is fixed by delaying paravirt/alternatives patching until after
relocations are applied. Any .altinstructions or .parainstructions
sections are prefixed with ".klp.arch.${objname}" and applied in
arch_klp_init_object_loaded().

Signed-off-by: Jessica Yu <jeyu@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-18 23:41:55 +02:00
Jessica Yu
425595a7fc livepatch: reuse module loader code to write relocations
Reuse module loader code to write relocations, thereby eliminating the need
for architecture specific relocation code in livepatch. Specifically, reuse
the apply_relocate_add() function in the module loader to write relocations
instead of duplicating functionality in livepatch's arch-dependent
klp_write_module_reloc() function.

In order to accomplish this, livepatch modules manage their own relocation
sections (marked with the SHF_RELA_LIVEPATCH section flag) and
livepatch-specific symbols (marked with SHN_LIVEPATCH symbol section
index). To apply livepatch relocation sections, livepatch symbols
referenced by relocs are resolved and then apply_relocate_add() is called
to apply those relocations.

In addition, remove x86 livepatch relocation code and the s390
klp_write_module_reloc() function stub. They are no longer needed since
relocation work has been offloaded to module loader.

Lastly, mark the module as a livepatch module so that the module loader
canappropriately identify and initialize it.

Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>   # for s390 changes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-01 15:00:11 +02:00
Josh Poimboeuf
b56b36ee67 livepatch: Cleanup module page permission changes
Calling set_memory_rw() and set_memory_ro() for every iteration of the
loop in klp_write_object_relocations() is messy, inefficient, and
error-prone.

Change all the read-only pages to read-write before the loop and convert
them back to read-only again afterwards.

Suggested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-04 22:51:07 +01:00
Rusty Russell
7523e4dc50 module: use a structure to encapsulate layout.
Makes it easier to handle init vs core cleanly, though the change is
fairly invasive across random architectures.

It simplifies the rbtree code immediately, however, while keeping the
core data together in the same cachline (now iff the rbtree code is
enabled).

Acked-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-04 22:46:25 +01:00
Josh Poimboeuf
e2391a2dca livepatch: Fix crash with !CONFIG_DEBUG_SET_MODULE_RONX
When loading a patch module on a kernel with
!CONFIG_DEBUG_SET_MODULE_RONX, the following crash occurs:

  [  205.988776] livepatch: enabling patch 'kpatch_meminfo_string'
  [  205.989829] BUG: unable to handle kernel paging request at ffffffffa08d2fc0
  [  205.989863] IP: [<ffffffff8154fecb>] do_init_module+0x8c/0x1ba
  [  205.989888] PGD 1a10067 PUD 1a11063 PMD 7bcde067 PTE 3740e161
  [  205.989915] Oops: 0003 [#1] SMP
  [  205.990187] CPU: 2 PID: 14570 Comm: insmod Tainted: G           O  K 4.1.12
  [  205.990214] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
  [  205.990249] task: ffff8800374aaa90 ti: ffff8800794b8000 task.ti: ffff8800794b8000
  [  205.990276] RIP: 0010:[<ffffffff8154fecb>]  [<ffffffff8154fecb>] do_init_module+0x8c/0x1ba
  [  205.990307] RSP: 0018:ffff8800794bbd58  EFLAGS: 00010246
  [  205.990327] RAX: 0000000000000000 RBX: ffffffffa08d2fc0 RCX: 0000000000000000
  [  205.990356] RDX: 01ffff8000000080 RSI: 0000000000000000 RDI: ffffffff81a54b40
  [  205.990382] RBP: ffff88007b4c4d80 R08: 0000000000000007 R09: 0000000000000000
  [  205.990408] R10: 0000000000000008 R11: ffffea0001f18840 R12: 0000000000000000
  [  205.990433] R13: 0000000000000001 R14: ffffffffa08d2fc0 R15: ffff88007bd0bc40
  [  205.990459] FS:  00007f1128fbc700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000
  [  205.990488] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  205.990509] CR2: ffffffffa08d2fc0 CR3: 000000002606e000 CR4: 00000000001406e0
  [  205.990536] Stack:
  [  205.990545]  ffff8800794bbec8 0000000000000001 ffffffffa08d3010 ffffffff810ecea9
  [  205.990576]  ffffffff810e8e40 000000000005f360 ffff88007bd0bc50 ffffffffa08d3240
  [  205.990608]  ffffffffa08d52c0 ffffffffa08d3210 ffff8800794bbed8 ffff8800794bbf1c
  [  205.990639] Call Trace:
  [  205.990651]  [<ffffffff810ecea9>] ? load_module+0x1e59/0x23a0
  [  205.990672]  [<ffffffff810e8e40>] ? store_uevent+0x40/0x40
  [  205.990693]  [<ffffffff810e99b5>] ? copy_module_from_fd.isra.49+0xb5/0x140
  [  205.990718]  [<ffffffff810ed5bd>] ? SyS_finit_module+0x7d/0xa0
  [  205.990741]  [<ffffffff81556832>] ? system_call_fastpath+0x16/0x75
  [  205.990763] Code: f9 00 00 00 74 23 49 c7 c0 92 e1 60 81 48 8d 53 18 89 c1 4c 89 c6 48 c7 c7 f0 85 7d 81 31 c0 e8 71 fa ff ff e8 58 0e 00 00 31 f6 <c7> 03 00 00 00 00 48 89 da 48 c7 c7 20 c7 a5 81 e8 d0 ec b3 ff
  [  205.990916] RIP  [<ffffffff8154fecb>] do_init_module+0x8c/0x1ba
  [  205.990940]  RSP <ffff8800794bbd58>
  [  205.990953] CR2: ffffffffa08d2fc0

With !CONFIG_DEBUG_SET_MODULE_RONX, module text and rodata pages are
writable, and the debug_align() macro allows the module struct to share
a page with executable text.  When klp_write_module_reloc() calls
set_memory_ro() on the page, it effectively turns the module struct into
a read-only structure, resulting in a page fault when load_module() does
"mod->state = MODULE_STATE_LIVE".

Reported-by: Cyril B. <cbay@alwaysdata.com>
Tested-by: Cyril B. <cbay@alwaysdata.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-06 11:10:03 +01:00
Seth Jennings
b700e7f03d livepatch: kernel: add support for live patching
This commit introduces code for the live patching core.  It implements
an ftrace-based mechanism and kernel interface for doing live patching
of kernel and kernel module functions.

It represents the greatest common functionality set between kpatch and
kgraft and can accept patches built using either method.

This first version does not implement any consistency mechanism that
ensures that old and new code do not run together.  In practice, ~90% of
CVEs are safe to apply in this way, since they simply add a conditional
check.  However, any function change that can not execute safely with
the old version of the function can _not_ be safely applied in this
version.

[ jkosina@suse.cz: due to the number of contributions that got folded into
  this original patch from Seth Jennings, add SUSE's copyright as well, as
  discussed via e-mail ]

Signed-off-by: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-22 15:40:49 +01:00