Pull drm fixes from Dave Airlie:
"I didn't want these to wait for stable cycle.
The nouveau and radeon ones are the same problem, where the runtime pm
stuff broke non-runtime pm managed secondary GPUs.
The udl fix is for an oops on unplug, and the i915 fix is for a
regression on Sandybridge even though it may break haswell (regression
wins)"
Daniel Vetter comments:
"My apologies for the i915 regression fumble, that thing somehow fell
through the cracks here for almost half a year :( Imo that's more than
enough flailing to just go ahead with the revert, and the re-broken
hsw should get peoples attention ..."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Undo gtt scratch pte unmapping again
drm/radeon: fix runtime suspend breaking secondary GPUs
drm/nouveau: fail runtime pm properly.
drm/udl: take reference to device struct for dma-bufs
Pull i2c build fix from Wolfram Sang:
"The build fix from my last request unveiled another build problem
which is fixed with this patch"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cpm: Fix build by adding of_address.h and of_irq.h
1. Ballooning a 32-bit guest would eventually crash it.
2. Revert a broken fix for a regression with NUMA_BALACING. The bad
fix caused PV guests to crash after migration. This is not ideal
but unpicking the madness that is _PAGE_NUMA == _PAGE_PROTNONE will
take a while longer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQEcBAABAgAGBQJTMXIFAAoJEFxbo/MsZsTR+9EH/jRBJIF1hWhBEH9DCbnlMA7x
yQD30pcI/CjhaOp+5bJhfk/8IUqGX9ODgEt54kauzDuapkERMncUrlLaOz3nay3p
BrD3yoaSSwgHTATbVFiqHhu2/Qrwb0RgmdaXrwpeF//5wN9/+OvTQhcJdYMv1I6u
ajDl28LH26tBCswz9a6sFMNqIplU3qKuUhC6n/oBLjF+ZQe8g3AUQtkQX0Jg9MPH
cyn9s6BxwtDptcMwYoaeIIFXiMC5onwZvO0vn9U4SOk45xHyruu3/F76M/zHE/zO
Mv+8iotAEEEp8sgntXeldaXfh0xG9ikmf32eIfOq7KR3ecMT8JSa9Q7jPurKaWo=
=YQuC
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.14-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen bugfixes from David Vrabel:
"Fix two bugs that cause x86 PV guest crashes.
1. Ballooning a 32-bit guest would eventually crash it.
2. Revert a broken fix for a regression with NUMA_BALACING. The bad
fix caused PV guests to crash after migration. This is not ideal
but unpicking the madness that is _PAGE_NUMA == _PAGE_PROTNONE will
take a while longer"
* tag 'stable/for-linus-3.14-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Revert "xen: properly account for _PAGE_NUMA during xen pte translations"
xen/balloon: flush persistent kmaps in correct position
This is *not* bisected, but the likely regression is
commit c35614380d
Author: Zhao Yakui <yakui.zhao@intel.com>
Date: Tue Nov 24 09:48:48 2009 +0800
drm/i915: Don't set up the TV port if it isn't in the BIOS table.
The commit does not check for all TV device types that might be present
in the VBT, disabling TV out for the missing ones. Add composite
S-video.
Reported-and-tested-by: Matthew Khouzam <matthew.khouzam@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73362
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Broadwell introduces large address spaces, greater than 32bits in width.
These require that we then store and print 64bit values. If we were to
zero pad them out to 16 hexadecimal places, we have to carefully count
the leading zeroes - which is easy to make a mistake. Conversely, if we
do not zero pad out to 16, but keep it padding to 8 hexadecimal places,
it is very easy to miss an address that is actually larger than 4GiB. A
suggested compromise is to insert a space between the upper and lower
dwords of the address so that we can continue with our accustom 32bit
parser. (Alternatively, we could do the equivalent in our userspace
decoder.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As Broadwell has an increased virtual address size, it requires more
than 32 bits to store offsets into its address space. This includes the
debug registers to track the current HEAD of the individual rings, which
may be anywhere within the per-process address spaces. In order to find
the full location, we need to read the high bits from a second register.
We then also need to expand our storage to keep track of the larger
address.
v2: Carefully read the two registers to catch wraparound between
the reads.
v3: Use a WARN_ON rather than loop indefinitely on an unstable
register read.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Drop spurious hunk which conflicted.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Not implementing this W/A can lead to hangs.
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rafael Barbalho <rafael.barbalho@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It apparently blows up on some machines. This functionally reverts
commit 828c79087c
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Wed Oct 16 09:21:30 2013 -0700
drm/i915: Disable GGTT PTEs on GEN6+ suspend
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64841
Reported-and-Tested-by: Brad Jackson <bjackson0971@gmail.com>
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the cursor width is changed, we may need to recompute our WM to
prevent untold flickering. We hope that the registers are flushed on the
same vblank to prevent underruns...
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we can use different cursor size, we can not hardcode 64 pixels
as the cursor width anymore.
v2: Apply to 965gm/g4x paths as well
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch Removes the VS_TIMER_DISPATCH bit enable in MI MODE reg for
platforms > Gen6.
VS_TIMER_DISPATCH bit enable was earlier required as a part of
WA 'WaTimedSingleVertexDispatch', which is now applicable only to
platforms < Gen7.
v2: Enhancing the scope of the patch to full Gen7 (Chris)
v3: Modifying the WA condition to the cover the applicable platforms,
and adding the WA name in comments. (Ville)
Signed-off-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Sourab Gupta <sourab.gupta@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # ivb, hsw -Chris
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we use different rps events for different platforms or due to wa,
we might end up needing this logic in a lot of places. Instead of
this let's use a variable in dev_priv to track the enabled PM
interrupts.
v2: Initialize pm_rps_events in intel_irq_init() (Ville).
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Frob the commit message a bit since the English was a bit too
garbled ;-) ]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since
commit 5c673b60a9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Mar 7 20:34:46 2014 +0100
drm/i915: Don't enable display error interrupts from the start
we don't enable underrun interrupts any more at takeover time.
Unfortunately I've forgotten to also adjust the sw-side tracking.
Since the code assumes that disabled pipes have underrun reporting
enabled set the disable flag only on all pipes which are active at
takeover time. Without this underrun reporting wasn't enabled
correctly on the first modeset. Note that for fastboot this is another
piece of state that needs to be fixed up by enabling the underrung
reporting after watermarks have beend fixed up.
On ivb/hsw an additional effect of this regression was that also all
cpu crc reporting stopped working since the master error interrupt it
shared across all pipes and sources.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76150
[danvet: Augment the code comment and polish the commit message a bit,
as discussed with Jani.]
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: lu hua <huax.lu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There's an entire pile of issues in here:
- Use the main RING_HEAD register, not ACTHD. ACTHD points at the gtt
offset of the batch buffer when a batch is executed. Semaphores are
always emitted to the main ring, so we always want to look at that.
- Mask the obtained HEAD pointer with the actual ring size, which is
much smaller. Together with the above issue this resulted us in
trying to dereference a pointer way outside of the ring mmio
mapping. The resulting invalid access in interrupt context
(hangcheck is executed from timers) lead to a full blown kernel
panic. The fbcon panic handler then tried to frob our driver harder,
resulting in a full machine hang at least on my snb here where I've
stumbled over this.
- Handle ring wrapping correctly and be a bit more explicit about how
many dwords we're scanning. We probably should also scan more than
just 4 ...
- Space out some of teh computations for readability.
This reduces hard-hangs on my snb here. Mika and QA both say that it
doesn't completel remove them, but at least for me it's a clear
improvement in stability.
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
References: https://bugs.freedesktop.org/show_bug.cgi?id=74100
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the recent addition of locking checks in
commit 62ff94a549
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
AuthorDate: Thu Jan 23 22:18:47 2014 +0100
drm/crtc-helper: remove LOCKING from kerneldoc
drm_add_edid_modes started to WARN about the mode_config.mutex not
being held in the lvds and dp initialization code.
Now since this is init code locking is fairly redudant if it wouldn't
be for the drm core registering sysfs files a bit early. And the
locking WARNINGs nicely enforce that indeed all access to the mode
lists are properly protected. And a full audit shows that only i915
and gma500 touch the modes lists at init time.
Hence I've opted to wrap up this entire mode detection sequence for
fixed panels with the mode_config mutex for both lvds and edp outputs.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This extends Benjamin Tissoires manual min/max quirk table with support for
the ThinkPad X240.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The new Lenovo Haswell series (-40's) contains a new Synaptics touchpad.
However, these new Synaptics devices report bad axis ranges.
Under Windows, it is not a problem because the Windows driver uses RMI4
over SMBus to talk to the device. Under Linux, we are using the PS/2
fallback interface and it occurs the reported ranges are wrong.
Of course, it would be too easy to have only one range for the whole
series, each touchpad seems to be calibrated in a different way.
We can not use SMBus to get the actual range because I suspect the firmware
will switch into the SMBus mode and stop talking through PS/2 (this is the
case for hybrid HID over I2C / PS/2 Synaptics touchpads).
So as a temporary solution (until RMI4 land into upstream), start a new
list of quirks with the min/max manually set.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In commit 47a1b79630 ("tick/timekeeping: Call
update_wall_time outside the jiffies lock"), we moved to calling
clock_was_set() due to the fact that we were no longer holding
the timekeeping or jiffies lock.
However, there is still the problem that clock_was_set()
triggers an IPI, which cannot be done from the timer's hard irq
context, and will generate WARN_ON warnings.
Apparently in my earlier testing, I'm guessing I didn't bump the
dmesg log level, so I somehow missed the WARN_ONs.
Thus we need to revert back to calling clock_was_set_delayed().
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1395963049-11923-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It apparently blows up on some machines. This functionally reverts
commit 828c79087c
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Wed Oct 16 09:21:30 2013 -0700
drm/i915: Disable GGTT PTEs on GEN6+ suspend
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64841
Reported-and-Tested-by: Brad Jackson <bjackson0971@gmail.com>
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Same fix as for nouveau, when we fail with EINVAL, subsequent
gets fail hard, causing the device not to open.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The second parameter of __mlx4_init_one() is used to identify whether the
pci_dev is a PF or VF. Currently, when it is invoked in mlx4_pci_slot_reset()
this information is missed.
This patch match the pci_dev with mlx4_pci_table and passes the
pci_device_id.driver_data to __mlx4_init_one() in mlx4_pci_slot_reset().
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_zerocopy can copy elements of the frags array between skbs, but it doesn't
orphan them. Also, it doesn't handle errors, so this patch takes care of that
as well, and modify the callers accordingly. skb_tx_error() is also added to
the callers so they will signal the failed delivery towards the creator of the
skb.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if the card supports CTAG acceleration we do not
account for the vlan header even if we are configuring an
8021AD vlan. This may not be best since we'll do software
tagging for 8021AD which will cause data copy on skb head expansion
Configure the length based on available hw offload capabilities and
vlan protocol.
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a race which happens by freeing an object on the stack.
Quoting Julius:
> The issue is
> that it calls usbnet_terminate_urbs() before that, which temporarily
> installs a waitqueue in dev->wait in order to be able to wait on the
> tasklet to run and finish up some queues. The waiting itself looks
> okay, but the access to 'dev->wait' is totally unprotected and can
> race arbitrarily. I think in this case usbnet_bh() managed to succeed
> it's dev->wait check just before usbnet_terminate_urbs() sets it back
> to NULL. The latter then finishes and the waitqueue_t structure on its
> stack gets overwritten by other functions halfway through the
> wake_up() call in usbnet_bh().
The fix is to just not allocate the data structure on the stack.
As dev->wait is abused as a flag it also takes a runtime PM change
to fix this bug.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Reported-by: Grant Grundler <grundler@google.com>
Tested-by: Grant Grundler <grundler@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current error handling of virtqueue_kick() was wrong in two places:
- The skb were freed immediately when virtqueue_kick() fail during
xmit. This may lead double free since the skb was not detached from
the virtqueue.
- try_fill_recv() returns false when virtqueue_kick() fail. This will
lead unnecessary rescheduling of refill work.
Actually, it's safe to just ignore the kick failure in those two
places. So this patch fixes this by partially revert commit
6797590118.
Fixes 6797590118
(virtio_net: verify if virtqueue_kick() succeeded).
Cc: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we allocated anon_inode_inode in anon_inodefs_mount. This is
somewhat fragile as if that function ever gets called again, it will
overwrite anon_inode_inode pointer. So move the initialization of
anon_inode_inode to anon_inode_init().
Signed-off-by: Jan Kara <jack@suse.cz>
[ Further simplified on suggestion from Dave Jones ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we were on a non-optimus device, we'd return -EINVAL, this would
lead to the over engineered runtime pm system to go into an error
state, subsequent get_sync's would fail, so we'd never be able
to open the device again.
(like really get_sync shouldn't fail if the device isn't powered
down).
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
this stops the device from being deleted before all the dma-bufs
on it are freed, this fixes an oops when you unplug a udl device while
it has imported a buffer from another device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some applications didn't expect recvmsg() on a non blocking socket
could return -EINTR. This possibility was added as a side effect
of commit b3ca9b02b0 ("net: fix multithreaded signal handling in
unix recv routines").
To hit this bug, you need to be a bit unlucky, as the u->readlock
mutex is usually held for very small periods.
Fixes: b3ca9b02b0 ("net: fix multithreaded signal handling in unix recv routines")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni says:
====================
net: mvneta: fix usage as a module
The following set of two patches fix the usage of the mvneta driver
when built as a module, and used in RGMII configurations. It is
somewhat similar to a previous fix that was made by Arnaud Patard, but
which was limited to SGMII configurations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The mvneta driver currently uses of_iomap(), which has two drawbacks:
it doesn't request the resource, and it isn't devm-style so some error
handling is needed.
This commit switches to use devm_ioremap_resource() instead, which
automatically requests the resource (so the I/O registers region shows
up properly in /proc/iomem), and also is devm-style, which allows to
get rid of some error handling to unmap the I/O registers region.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 5445eaf309 ('mvneta: Try to fix mvneta when compiled as
module') fixed the mvneta driver to make it work properly when loaded
as a module in SGMII configuration, which was tested successful by the
author on the Armada XP OpenBlocks AX3, which uses SGMII.
However, it turns out that the Armada XP GP, which uses RGMII, is
affected by a similar problem: its SERDES configuration is lost when
mvneta is loaded as a module, because this configuration is set by the
bootloader, and then lost because the clock is gated by the clock
framework until the mvneta driver is loaded again and the clock is
re-enabled.
However, it turns out that for the RGMII case, setting the SERDES
configuration is not sufficient: the PCS enable bit in the
MVNETA_GMAC_CTRL_2 register must also be set, like in the SGMII
configuration.
Therefore, this commit reworks the SGMII/RGMII initialization: the
only difference between the two now is a different SERDES
configuration, all the rest is identical.
In detail, to achieve this, the commit:
* Renames MVNETA_SGMII_SERDES_CFG to MVNETA_SERDES_CFG because it is
not specific to SGMII, but also used on RGMII configurations.
* Adds a MVNETA_RGMII_SERDES_PROTO definition, that must be used as
the MVNETA_SERDES_CFG value in RGMII configurations.
* Removes the mvneta_gmac_rgmii_set() and mvneta_port_sgmii_config()
functions, and instead directly do the SGMII/RGMII configuration in
mvneta_port_up(), from where those functions where called. It is
worth mentioning that mvneta_gmac_rgmii_set() had an 'enable'
parameter that was always passed as '1', so it was pretty useless.
* Reworks the mvneta_port_up() function to set the MVNETA_SERDES_CFG
register to the appropriate value depending on the RGMII vs. SGMII
configuration. It also unconditionally set the PCS_ENABLE bit (was
already done for SGMII, but is now also needed for RGMII), and sets
the PORT_RGMII bit (which was already done for both SGMII and
RGMII).
This commit was successfully tested with mvneta compiled as a module,
on both the OpenBlocks AX3 (SGMII configuration) and the Armada XP GP
(RGMII configuration).
Reported-by: Steve McIntyre <steve@einval.com>
Cc: stable@vger.kernel.org # 3.11.x: 5445eaf309 mvneta: Try to fix mvneta when compiled as module
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bit 3 of the MVNETA_GMAC_CTRL_2 is actually used to enable the PCS,
not the PSC: there was a typo in the name of the define, which this
commit fixes.
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cypress PS/2 trackpad models supported by the cypress_ps2 driver
emulate BTN_RIGHT events in firmware based on the finger position, as part
of this no motion events are sent when the finger is in the button area.
The INPUT_PROP_BUTTONPAD property is there to indicate to userspace that
BTN_RIGHT events should be emulated in userspace, which is not necessary
in this case.
When INPUT_PROP_BUTTONPAD is advertised userspace will wait for a motion
event before propagating the button event higher up the stack, as it needs
current abs x + y data for its BTN_RIGHT emulation. Since in the
cypress_ps2 pads don't report motion events in the button area, this means
that clicks in the button area end up being ignored, so
INPUT_PROP_BUTTONPAD actually causes problems for these touchpads, and
removing it fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=76341
Reported-by: Adam Williamson <awilliam@redhat.com>
Tested-by: Adam Williamson <awilliam@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Including hardware acceleration features in vlan_features breaks
stacked vlans (Q-in-Q) by marking the bottom vlan interface as
capable of acceleration. This causes one of the tags to be lost
and the packets are sent with a sing vlan header.
CC: Nithin Nayak Sujir <nsujir@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 10ddceb22b (ip_tunnel:multicast process cause panic due
to skb->_skb_refdst NULL pointer) removed dst-drop call from
ip-tunnel-recv.
Following commit reintroduce dst-drop and fix the original bug by
checking loopback packet before releasing dst.
Original bug: https://bugzilla.kernel.org/show_bug.cgi?id=70681
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
my slides for the event trigger tutorial. I booted a 3.14-rc7 kernel
to perform what I wanted to teach and cut and paste it into my slides.
When I tried the traceon event trigger with a condition attached to it
(turns tracing on only if a field of the trigger event matches a condition
set by the user), nothing happened. Tracing would not turn on. I stopped
working on my presentation in order to find what was wrong.
It ended up being the way trace event triggers work when they have
conditions. Instead of copying the fields, the condition code just
looks at the fields that were copied into the ring buffer. This works
great, unless tracing is off. That's because when the event is reserved
on the ring buffer, the ring buffer returns a NULL pointer, this tells
the tracing code that the ring buffer is disabled. This ends up being
a problem for the traceon trigger if it is using this information to
check its condition.
Luckily the code that checks if tracing is on returns the ring buffer
to use (because the ring buffer is determined by the event file
also passed to that field). I was able to easily solve this bug by
checking in that helper function if the returned ring buffer entry
is NULL, and if so, also check the file flag if it has a trace event
trigger condition, and if so, to pass back a temp ring buffer to use.
This will allow the trace event trigger condition to still test the
event fields, but nothing will be recorded.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTMtD2AAoJEKQekfcNnQGuwrUH/juk/qKY7T/nq98iMleOD+LR
iTQyWh9zvHdku/3ZlK5eJqla2TJUctM5Sf9WhvV/iXJ2/9m5qnekZ6gCoraGVpG4
qfKZAiHdGU0sFdp2NIt1uIHcqjYc8dg2KGajEKGNr7E2F3fvSTfNZV+WKAnmGqlE
8ICsoYJ/Uv4kh18QQJexbyd7jXWE8tzxxS9UzPvCtCiSd1xf2yCAS5OlwPYafgiv
Egbjqq7IUCJfVb0h/YfgPbEW69sjlxOulzn42Nii+UOx9uv1RTdtXdivyCXDWfX3
Que0Do757oTvpW/22s9T3mpUtYLCB+6B2GV+ljqbLCZ5pRywc/GDCU//D1AXKEI=
=dKWH
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.14-rc7-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"While on my flight to Linux Collaboration Summit, I was working on my
slides for the event trigger tutorial. I booted a 3.14-rc7 kernel to
perform what I wanted to teach and cut and paste it into my slides.
When I tried the traceon event trigger with a condition attached to it
(turns tracing on only if a field of the trigger event matches a
condition set by the user), nothing happened. Tracing would not turn
on. I stopped working on my presentation in order to find what was
wrong.
It ended up being the way trace event triggers work when they have
conditions. Instead of copying the fields, the condition code just
looks at the fields that were copied into the ring buffer. This works
great, unless tracing is off. That's because when the event is
reserved on the ring buffer, the ring buffer returns a NULL pointer,
this tells the tracing code that the ring buffer is disabled. This
ends up being a problem for the traceon trigger if it is using this
information to check its condition.
Luckily the code that checks if tracing is on returns the ring buffer
to use (because the ring buffer is determined by the event file also
passed to that field). I was able to easily solve this bug by
checking in that helper function if the returned ring buffer entry is
NULL, and if so, also check the file flag if it has a trace event
trigger condition, and if so, to pass back a temp ring buffer to use.
This will allow the trace event trigger condition to still test the
event fields, but nothing will be recorded"
* tag 'trace-fixes-v3.14-rc7-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix traceon trigger condition to actually turn tracing on
While working on my tutorial for 2014 Linux Collaboration Summit
I found that the traceon trigger did not work when conditions were
used. The other triggers worked fine though. Looking into it, it
is because of the way the triggers use the ring buffer to store
the fields it will use for the condition. But if tracing is off, nothing
is stored in the buffer, and the tracepoint exits before calling the
trigger to test the condition. This is fine for all the triggers that
only work when tracing is on, but for traceon trigger that is to
work when tracing is off, nothing happens.
The fix is simple, just use a temp ring buffer to record the event
if tracing is off and the event has a trace event conditional trigger
enabled. The rest of the tracepoint code will work just fine, but
the tracepoint wont be recorded in the other buffers.
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The previous commit removed the register_filesystem() call and the
associated error handling, but left the label for the error path that no
longer exists. Remove that too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
anon_inodefs filesystem is a kernel internal filesystem userspace
shouldn't mess with. Remove registration of it so userspace cannot
even try to mount it (which would fail anyway because the filesystem is
MS_NOUSER).
This fixes an oops triggered by trinity when it tried mounting
anon_inodefs which overwrote anon_inode_inode pointer while other CPU
has been in anon_inode_getfile() between ihold() and d_instantiate().
Thus effectively creating dentry pointing to an inode without holding a
reference to it.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull nfsd fix frm Bruce Fields:
"J R Okajima sent this early and I was just slow to pass it along,
apologies. Fortunately it's a simple fix"
* 'nfsd-next' of git://linux-nfs.org/~bfields/linux:
nfsd: fix lost nfserrno() call in nfsd_setattr()
Pull vfs fixes from Al Viro:
"These four commits are obvious fixes (a couple of fdget_pos()-related
ones from Eric Biggers, prepend_name() fix, missing checks for false
negatives from __lookup_mnt() in fs/namei.c)"
For now I'm pulling just the four obvious fixes, there's another four
pending in Al's 'for-linus' branch wrt the mnt_hash list that were more
involved.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
rcuwalk: recheck mount_lock after mountpoint crossing attempts
make prepend_name() work correctly when called with negative *buflen
vfs: Don't let __fdget_pos() get FMODE_PATH files
vfs: atomic f_pos access in llseek()
This reverts commit a9c8e4beee.
PTEs in Xen PV guests must contain machine addresses if _PAGE_PRESENT
is set and pseudo-physical addresses is _PAGE_PRESENT is clear.
This is because during a domain save/restore (migration) the page
table entries are "canonicalised" and uncanonicalised". i.e., MFNs are
converted to PFNs during domain save so that on a restore the page
table entries may be rewritten with the new MFNs on the destination.
This canonicalisation is only done for PTEs that are present.
This change resulted in writing PTEs with MFNs if _PAGE_PROTNONE (or
_PAGE_NUMA) was set but _PAGE_PRESENT was clear. These PTEs would be
migrated as-is which would result in unexpected behaviour in the
destination domain. Either a) the MFN would be translated to the
wrong PFN/page; b) setting the _PAGE_PRESENT bit would clear the PTE
because the MFN is no longer owned by the domain; or c) the present
bit would not get set.
Symptoms include "Bad page" reports when munmapping after migrating a
domain.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org> [3.12+]
Xen balloon driver will update ballooned out pages' P2M entries to point
to scratch page for PV guests. In 24f69373e2 ("xen/balloon: don't alloc
page while non-preemptible", kmap_flush_unused was moved after updating
P2M table. In that case for 32 bit PV guest we might end up with
P2M X -----> S (S is mfn of balloon scratch page)
M2P Y -----> X (Y is mfn in persistent kmap entry)
kmap_flush_unused() iterates through all the PTEs in the kmap address
space, using pte_to_page() to obtain the page. If the p2m and the m2p
are inconsistent the incorrect page is returned. This will clear
page->address on the wrong page which may cause subsequent oopses if
that page is currently kmap'ed.
Move the flush back between get_page and __set_phys_to_machine to fix
this.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: stable@vger.kernel.org # 3.12+
Pull parisc updates from Helge Deller:
- revert parts of the latest patch regarding font selection with STICON
console
- wire up the utimes() syscall for parisc
- remove the unused parisc tmpalias code and unnecessary arch*relax
defines
* 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: locks: remove redundant arch_*_relax operations
parisc: wire up sys_utimes
parisc: Remove unused CONFIG_PARISC_TMPALIAS code
partly revert commit 8a10bc9: parisc/sti_console: prefer Linux fonts over built-in ROM fonts
Pull sparc fixes from David Miller:
1) Do serial locking in a way that makes things clear that these are
IRQ spinlocks.
2) Conversion to generic idle loop broke first generation Niagara
machines, need to have %pil interrupts enabled during cpu yield
hypervisor call.
3) Do not use magic constants for iterations over tsb tables, from Doug
Wilson.
4) Fix erroneous truncation of 64-bit system call return values to
32-bit. From Dave Kleikamp.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Make sure %pil interrupts are enabled during hypervisor yield.
sparc64:tsb.c:use array size macro rather than number
sparc64: don't treat 64-bit syscall return codes as 32-bit
sparc: serial: Clean up the locking for -rt
Pull networking fixes from David Miller:
1) OpenVswitch's lookup_datapath() returns error pointers, so don't
check against NULL. From Jiri Pirko.
2) pfkey_compile_policy() code path tries to do a GFP_KERNEL allocation
under RCU locks, fix by using GFP_ATOMIC when necessary. From
Nikolay Aleksandrov.
3) phy_suspend() indirectly passes uninitialized data into the ethtool
get wake-on-land implementations. Fix from Sebastian Hesselbarth.
4) CPSW driver unregisters CPTS twice, fix from Benedikt Spranger.
5) If SKB allocation of reply packet fails, vxlan's arp_reduce() defers
a NULL pointer. Fix from David Stevens.
6) IPV6 neigh handling in vxlan doesn't validate the destination
address properly, and it builds a packet with the src and dst
reversed. Fix also from David Stevens.
7) Fix spinlock recursion during subscription failures in TIPC stack,
from Erik Hugne.
8) Revert buggy conversion of davinci_emac to devm_request_irq, from
Chrstian Riesch.
9) Wrong flags passed into forwarding database netlink notifications,
from Nicolas Dichtel.
10) The netpoll neighbour soliciation handler checks wrong ethertype,
needs to be ETH_P_IPV6 rather than ETH_P_ARP. Fix from Li RongQing.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits)
tipc: fix spinlock recursion bug for failed subscriptions
vxlan: fix nonfunctional neigh_reduce()
net: davinci_emac: Fix rollback of emac_dev_open()
net: davinci_emac: Replace devm_request_irq with request_irq
netpoll: fix the skb check in pkt_is_ns
net: micrel : ks8851-ml: add vdd-supply support
ip6mr: fix mfc notification flags
ipmr: fix mfc notification flags
rtnetlink: fix fdb notification flags
tcp: syncookies: do not use getnstimeofday()
netlink: fix setsockopt in mmap examples in documentation
openvswitch: Correctly report flow used times for first 5 minutes after boot.
via-rhine: Disable device in error path
ATHEROS-ATL1E: Convert iounmap to pci_iounmap
vxlan: fix potential NULL dereference in arp_reduce()
cnic: Update version to 2.5.20 and copyright year.
cnic,bnx2i,bnx2fc: Fix inconsistent use of page size
cnic: Use proper ulp_ops for per device operations.
net: cdc_ncm: fix control message ordering
ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly
...
If a topology event subscription fails for any reason, such as out
of memory, max number reached or because we received an invalid
request the correct behavior is to terminate the subscribers
connection to the topology server. This is currently broken and
produces the following oops:
[27.953662] tipc: Subscription rejected, illegal request
[27.955329] BUG: spinlock recursion on CPU#1, kworker/u4:0/6
[27.957066] lock: 0xffff88003c67f408, .magic: dead4ead, .owner: kworker/u4:0/6, .owner_cpu: 1
[27.958054] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.0-rc6+ #5
[27.960230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[27.960874] Workqueue: tipc_rcv tipc_recv_work [tipc]
[27.961430] ffff88003c67f408 ffff88003de27c18 ffffffff815c0207 ffff88003de1c050
[27.962292] ffff88003de27c38 ffffffff815beec5 ffff88003c67f408 ffffffff817f0a8a
[27.963152] ffff88003de27c58 ffffffff815beeeb ffff88003c67f408 ffffffffa0013520
[27.964023] Call Trace:
[27.964292] [<ffffffff815c0207>] dump_stack+0x45/0x56
[27.964874] [<ffffffff815beec5>] spin_dump+0x8c/0x91
[27.965420] [<ffffffff815beeeb>] spin_bug+0x21/0x26
[27.965995] [<ffffffff81083df6>] do_raw_spin_lock+0x116/0x140
[27.966631] [<ffffffff815c6215>] _raw_spin_lock_bh+0x15/0x20
[27.967256] [<ffffffffa0008540>] subscr_conn_shutdown_event+0x20/0xa0 [tipc]
[27.968051] [<ffffffffa000fde4>] tipc_close_conn+0xa4/0xb0 [tipc]
[27.968722] [<ffffffffa00101ba>] tipc_conn_terminate+0x1a/0x30 [tipc]
[27.969436] [<ffffffffa00089a2>] subscr_conn_msg_event+0x1f2/0x2f0 [tipc]
[27.970209] [<ffffffffa0010000>] tipc_receive_from_sock+0x90/0xf0 [tipc]
[27.970972] [<ffffffffa000fa79>] tipc_recv_work+0x29/0x50 [tipc]
[27.971633] [<ffffffff8105dbf5>] process_one_work+0x165/0x3e0
[27.972267] [<ffffffff8105e869>] worker_thread+0x119/0x3a0
[27.972896] [<ffffffff8105e750>] ? manage_workers.isra.25+0x2a0/0x2a0
[27.973622] [<ffffffff810648af>] kthread+0xdf/0x100
[27.974168] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0
[27.974893] [<ffffffff815ce13c>] ret_from_fork+0x7c/0xb0
[27.975466] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0
The recursion occurs when subscr_terminate tries to grab the
subscriber lock, which is already taken by subscr_conn_msg_event.
We fix this by checking if the request to establish a new
subscription was successful, and if not we initiate termination of
the subscriber after we have released the subscriber lock.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VXLAN neigh_reduce() code is completely non-functional since
check-in. Specific errors:
1) The original code drops all packets with a multicast destination address,
even though neighbor solicitations are sent to the solicited-node
address, a multicast address. The code after this check was never run.
2) The neighbor table lookup used the IPv6 header destination, which is the
solicited node address, rather than the target address from the
neighbor solicitation. So neighbor lookups would always fail if it
got this far. Also for L3MISSes.
3) The code calls ndisc_send_na(), which does a send on the tunnel device.
The context for neigh_reduce() is the transmit path, vxlan_xmit(),
where the host or a bridge-attached neighbor is trying to transmit
a neighbor solicitation. To respond to it, the tunnel endpoint needs
to do a *receive* of the appropriate neighbor advertisement. Doing a
send, would only try to send the advertisement, encapsulated, to the
remote destinations in the fdb -- hosts that definitely did not do the
corresponding solicitation.
4) The code uses the tunnel endpoint IPv6 forwarding flag to determine the
isrouter flag in the advertisement. This has nothing to do with whether
or not the target is a router, and generally won't be set since the
tunnel endpoint is bridging, not routing, traffic.
The patch below creates a proxy neighbor advertisement to respond to
neighbor solicitions as intended, providing proper IPv6 support for neighbor
reduction.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
