Commit Graph

9823 Commits

Author SHA1 Message Date
Linus Torvalds
0961d6581c Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables
  intel-iommu: Combine the BIOS DMAR table warning messages
  panic: Add taint flag TAINT_FIRMWARE_WORKAROUND ('I')
  panic: Allow warnings to set different taint flags
  intel-iommu: intel_iommu_map_range failed at very end of address space
  intel-iommu: errors with smaller iommu widths
  intel-iommu: Fix boot inside 64bit virtualbox with io-apic disabled
  intel-iommu: use physfn to search drhd for VF
  intel-iommu: Print out iommu seq_id
  intel-iommu: Don't complain that ACPI_DMAR_SCOPE_TYPE_IOAPIC is not supported
  intel-iommu: Avoid global flushes with caching mode.
  intel-iommu: Use correct domain ID when caching mode is enabled
  intel-iommu mistakenly uses offset_pfn when caching mode is enabled
  intel-iommu: use for_each_set_bit()
  intel-iommu: Fix section mismatch dmar_ir_support() uses dmar_tbl.
2010-05-21 17:25:01 -07:00
Linus Torvalds
a8251096b4 Merge branch 'modules' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'modules' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: drop the lock while waiting for module to complete initialization.
  MODULE_DEVICE_TABLE(isapnp, ...) does nothing
  hisax_fcpcipnp: fix broken isapnp device table.
  isapnp: move definitions to mod_devicetable.h so file2alias can reach them.
2010-05-21 17:15:44 -07:00
Linus Torvalds
6e80e8ed5e Merge branch 'for-2.6.35' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.35' of git://git.kernel.dk/linux-2.6-block: (86 commits)
  pipe: set lower and upper limit on max pages in the pipe page array
  pipe: add support for shrinking and growing pipes
  drbd: This is now equivalent to drbd release 8.3.8rc1
  drbd: Do not free p_uuid early, this is done in the exit code of the receiver
  drbd: Null pointer deref fix to the large "multi bio rewrite"
  drbd: Fix: Do not detach, if a bio with a barrier fails
  drbd: Ensure to not trigger late-new-UUID creation multiple times
  drbd: Do not Oops when C_STANDALONE when uuid gets generated
  writeback: fix mixed up arguments to bdi_start_writeback()
  writeback: fix problem with !CONFIG_BLOCK compilation
  block: improve automatic native capacity unlocking
  block: use struct parsed_partitions *state universally in partition check code
  block,ide: simplify bdops->set_capacity() to ->unlock_native_capacity()
  block: restart partition scan after resizing a device
  buffer: make invalidate_bdev() drain all percpu LRU add caches
  block: remove all rcu head initializations
  writeback: fixups for !dirty_writeback_centisecs
  writeback: bdi_writeback_task() must set task state before calling schedule()
  writeback: ensure that WB_SYNC_NONE writeback with sb pinned is sync
  drivers/block/drbd: Use kzalloc
  ...
2010-05-21 15:25:33 -07:00
Randy Dunlap
0fc377bd64 sysctl: fix kernel-doc notation and typos
Fix kernel-doc warnings, kernel-doc special characters, and
typos in recent kernel/sysctl.c additions.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-21 15:23:12 -07:00
Linus Torvalds
2a8ba8f032 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (46 commits)
  random: simplify fips mode
  crypto: authenc - Fix cryptlen calculation
  crypto: talitos - add support for sha224
  crypto: talitos - add hash algorithms
  crypto: talitos - second prepare step for adding ahash algorithms
  crypto: talitos - prepare for adding ahash algorithms
  crypto: n2 - Add Niagara2 crypto driver
  crypto: skcipher - Add ablkcipher_walk interfaces
  crypto: testmgr - Add testing for async hashing and update/final
  crypto: tcrypt - Add speed tests for async hashing
  crypto: scatterwalk - Fix scatterwalk_done() test
  crypto: hifn_795x - Rename ablkcipher_walk to hifn_cipher_walk
  padata: Use get_online_cpus/put_online_cpus in padata_free
  padata: Add some code comments
  padata: Flush the padata queues actively
  padata: Use a timer to handle remaining objects in the reorder queues
  crypto: shash - Remove usage of CRYPTO_MINALIGN
  crypto: mv_cesa - Use resource_size
  crypto: omap - OMAP macros corrected
  padata: Use get_online_cpus/put_online_cpus
  ...

Fix up conflicts in arch/arm/mach-omap2/devices.c
2010-05-21 14:46:51 -07:00
Jens Axboe
ee9a3607fb Merge branch 'master' into for-2.6.35
Conflicts:
	fs/ext3/fsync.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 21:27:26 +02:00
Jens Axboe
b492e95be0 pipe: set lower and upper limit on max pages in the pipe page array
We need at least two to guarantee proper POSIX behaviour, so
never allow a smaller limit than that.

Also expose a /proc/sys/fs/pipe-max-pages sysctl file that allows
root to define a sane upper limit. Make it default to 16 times the
default size, which is 16 pages.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 21:12:52 +02:00
Jens Axboe
35f3d14dbb pipe: add support for shrinking and growing pipes
This patch adds F_GETPIPE_SZ and F_SETPIPE_SZ fcntl() actions for
growing and shrinking the size of a pipe and adjusts pipe.c and splice.c
(and relay and network splice) usage to work with these larger (or smaller)
pipes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 21:12:40 +02:00
Linus Torvalds
ac3ee84c60 Merge branch 'dbg-early-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'dbg-early-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  echi-dbgp: Add kernel debugger support for the usb debug port
  earlyprintk,vga,kdb: Fix \b and \r for earlyprintk=vga with kdb
  kgdboc: Add ekgdboc for early use of the kernel debugger
  x86,early dr regs,kgdb: Allow kernel debugger early dr register access
  x86,kgdb: Implement early hardware breakpoint debugging
  x86, kgdb, init: Add early and late debug states
  x86, kgdb: early trap init for early debug
2010-05-21 11:10:41 -07:00
Linus Torvalds
90b9a32d8f Merge branch 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: (25 commits)
  kdb,debug_core: Allow the debug core to receive a panic notification
  MAINTAINERS: update kgdb, kdb, and debug_core info
  debug_core,kdb: Allow the debug core to process a recursive debug entry
  printk,kdb: capture printk() when in kdb shell
  kgdboc,kdb: Allow kdb to work on a non open console port
  kgdb: Add the ability to schedule a breakpoint via a tasklet
  mips,kgdb: kdb low level trap catch and stack trace
  powerpc,kgdb: Introduce low level trap catching
  x86,kgdb: Add low level debug hook
  kgdb: remove post_primary_code references
  kgdb,docs: Update the kgdb docs to include kdb
  kgdboc,keyboard: Keyboard driver for kdb with kgdb
  kgdb: gdb "monitor" -> kdb passthrough
  sparc,sunzilog: Add console polling support for sunzilog serial driver
  sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code
  kgdb,8250,pl011: Return immediately from console poll
  kgdb: core changes to support kdb
  kdb: core for kgdb back end (2 of 2)
  kdb: core for kgdb back end (1 of 2)
  kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin
  ...
2010-05-21 11:08:05 -07:00
Chris Wright
2c3c8bea60 sysfs: add struct file* to bin_attr callbacks
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:31 -07:00
Peter Zijlstra
1704f47b50 lockdep: Add novalidate class for dev->mutex conversion
The conversion of device->sem to device->mutex resulted in lockdep
warnings. Create a novalidate class for now until the driver folks
come up with separate classes. That way we have at least the basic
mutex debugging coverage.

Add a checkpatch error so the usage is reserved for device->mutex.

[ tglx: checkpatch and compile fix for LOCKDEP=n ]

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
NeilBrown
db1afffab0 kref: remove kref_set
Of the three uses of kref_set in the kernel:

 One really should be kref_put as the code is letting go of a
    reference,
 Two really should be kref_init because the kref is being
    initialised.

This suggests that making kref_set available encourages bad code.
So fix the three uses and remove kref_set completely.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:29 -07:00
Steven Rostedt
ff5f149b6a Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into trace/tip/tracing/core-7
Conflicts:
	include/linux/ftrace_event.h
	include/trace/ftrace.h
	kernel/trace/trace_event_perf.c
	kernel/trace/trace_kprobe.c
	kernel/trace/trace_syscalls.c

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-21 11:49:57 -04:00
Linus Torvalds
33cf23b0a5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (182 commits)
  [SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline
  [SCSI] aacraid: prohibit access to array container space
  [SCSI] aacraid: add support for handling ATA pass-through commands.
  [SCSI] aacraid: expose physical devices for models with newer firmware
  [SCSI] aacraid: respond automatically to volumes added by config tool
  [SCSI] fcoe: fix fcoe module ref counting
  [SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn
  [SCSI] libfcoe: Fix incorrect MAC address clearing
  [SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex
  [SCSI] libfc: Move the port_id into lport
  [SCSI] fcoe: move link speed checking into its own routine
  [SCSI] libfc: Remove extra pointer check
  [SCSI] libfc: Remove unused fc_get_host_port_type
  [SCSI] fcoe: fixes wrong error exit in fcoe_create
  [SCSI] libfc: set seq_id for incoming sequence
  [SCSI] qla2xxx: Updates to ISP82xx support.
  [SCSI] qla2xxx: Optionally disable target reset.
  [SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive
  [SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did.
  [SCSI] qla2xxx: T10 DIF support added.
  ...
2010-05-21 07:19:18 -07:00
Peter Zijlstra
580d607cd6 perf: Optimize perf_tp_event_match()
Since we know tracepoints come from kernel context,
avoid conditionals that try and establish that very
fact.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.904944001@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:38:00 +02:00
Peter Zijlstra
a94ffaaf55 perf: Remove more code from the fastpath
Sanity checks cost instructions.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.852926930@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:59 +02:00
Peter Zijlstra
3cafa9fbb5 perf: Optimize the !vmalloc backed buffer
Reduce code and data by using the knowledge that for
!PERF_USE_VMALLOC data_order is always 0.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.795019386@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:59 +02:00
Peter Zijlstra
5d967a8be6 perf: Optimize perf_output_copy()
Reduce the clutter in perf_output_copy() by keeping
an interator in perf_output_handle.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.742809176@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:59 +02:00
Peter Zijlstra
adb8e118f2 perf: Fix wakeup storm for RO mmap()s
RO mmap()s don't update the tail pointer, so
comparing against it for determining the written data
size doesn't really do any good.

Keep track of when we last did a wakeup, and compare
against that.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.684479310@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:58 +02:00
Peter Zijlstra
0f139300c9 perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers
Since we want to ensure buffers only have a single
writer, we must avoid creating one with multiple.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.528215873@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:57 +02:00
Peter Zijlstra
1c024eca51 perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
Avoid the swevent hash-table by using per-tracepoint
hlists.

Also, avoid conditionals on the fast path by ordering
with probe unregister so that we should never get on
the callback path without the data being there.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.473188012@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:56 +02:00
Peter Zijlstra
b7e2ecef92 perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
Improves performance.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274259525.5605.10352.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:56 +02:00
Linus Torvalds
7a9b149212 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits)
  USB: remove unused usb_buffer_alloc and usb_buffer_free macros
  usb: musb: update gfp/slab.h includes
  USB: ftdi_sio: fix legacy SIO-device header
  USB: kl5usb105: reimplement using generic framework
  USB: kl5usb105: minor clean ups
  USB: kl5usb105: fix memory leak
  USB: io_ti: use kfifo to implement write buffering
  USB: io_ti: remove unsused private counter
  USB: ti_usb: use kfifo to implement write buffering
  USB: ir-usb: fix incorrect write-buffer length
  USB: aircable: fix incorrect write-buffer length
  USB: safe_serial: straighten out read processing
  USB: safe_serial: reimplement read using generic framework
  USB: safe_serial: reimplement write using generic framework
  usb-storage: always print quirks
  USB: usb-storage: trivial debug improvements
  USB: oti6858: use port write fifo
  USB: oti6858: use kfifo to implement write buffering
  USB: cypress_m8: use kfifo to implement write buffering
  USB: cypress_m8: remove unused drain define
  ...

Fix up conflicts (due to usb_buffer_alloc/free renaming) in
	drivers/input/tablet/acecad.c
	drivers/input/tablet/kbtab.c
	drivers/input/tablet/wacom_sys.c
	drivers/media/video/gspca/gspca.c
	sound/usb/usbaudio.c
2010-05-20 21:26:12 -07:00
Linus Torvalds
f8965467f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20 21:04:44 -07:00
Jason Wessel
0b4b3827db x86, kgdb, init: Add early and late debug states
The kernel debugger can operate well before mm_init(), but the x86
hardware breakpoint code which uses the perf api requires that the
kernel allocators are initialized.

This means the kernel debug core needs to provide an optional arch
specific call back to allow the initialization functions to run after
the kernel has been further initialized.

The kdb shell already had a similar restriction with an early
initialization and late initialization.  The kdb_init() was moved into
the debug core's version of the late init which is called
dbg_late_init();

CC: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:29 -05:00
Jason Wessel
4402c153cb kdb,debug_core: Allow the debug core to receive a panic notification
It is highly desirable to trap into kdb on panic.  The debug core will
attempt to register as the first in line for the panic notifier.

CC: Ingo Molnar <mingo@elte.hu>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:28 -05:00
Jason Wessel
6d90634076 debug_core,kdb: Allow the debug core to process a recursive debug entry
This allows kdb to debug a crash with in the kms code with a
single level recursive re-entry.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:27 -05:00
Jason Wessel
d37d39ae3b printk,kdb: capture printk() when in kdb shell
Certain calls from the kdb shell will call out to printk(), and any of
these calls should get vectored back to the kdb_printf() so that the
kdb pager and processing can be used, as well as to properly channel
I/O to the polled I/O devices.

CC: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
2010-05-20 21:04:27 -05:00
Jason Wessel
efe2f29e32 kgdboc,kdb: Allow kdb to work on a non open console port
If kdb is open on a serial port that is not actually a console make
sure to call the poll routines to emit and receive characters.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Martin Hicks <mort@sgi.com>
2010-05-20 21:04:26 -05:00
Jason Wessel
1cee5e35f1 kgdb: Add the ability to schedule a breakpoint via a tasklet
Some kgdb I/O modules require the ability to create a breakpoint
tasklet, such as kgdboc and external modules such as kgdboe.  The
breakpoint tasklet is used as an asynchronous entry point into the
debugger which will have a different function scope than the current
execution path where it might not be safe to have an inline
breakpoint.  This is true of some of the kgdb I/O drivers which share
code with kgdb and rest of the kernel users.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:26 -05:00
Jason Wessel
f503b5ae53 x86,kgdb: Add low level debug hook
The only way the debugger can handle a trap in inside rcu_lock,
notify_die, or atomic_notifier_call_chain without a triple fault is
to have a low level "first opportunity handler" in the int3 exception
handler.

Generally this will be something the vast majority of folks will not
need, but for those who need it, it is added as a kernel .config
option called KGDB_LOW_LEVEL_TRAP.

CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: H. Peter Anvin <hpa@zytor.com>
CC: x86@kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:25 -05:00
Jason Wessel
98ec1878ca kgdb: remove post_primary_code references
Remove all the references to the kgdb_post_primary_code.  This
function serves no useful purpose because you can obtain the same
information from the "struct kgdb_state *ks" from with in the
debugger, if for some reason you want the data.

Also remove the unintentional duplicate assignment for ks->ex_vector.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:25 -05:00
Jason Wessel
ada64e4c98 kgdboc,keyboard: Keyboard driver for kdb with kgdb
This patch adds in the kdb PS/2 keyboard driver.  This was mostly a
direct port from the original kdb where I cleaned up the code against
checkpatch.pl and added the glue to stitch it into kgdb.

This patch also enables early kdb debug via kgdbwait and the keyboard.

All the access to configure kdb using either a serial console or the
keyboard is done via kgdboc.

If you want to use only the keyboard and want to break in early you
would add to your kernel command arguments:

    kgdboc=kbd kgdbwait

If you wanted serial and or the keyboard access you could use:

    kgdboc=kbd,ttyS0

You can also configure kgdboc as a kernel module or at run time with
the sysfs where you can activate and deactivate kgdb.

Turn it on:
    echo kbd,ttyS0 > /sys/module/kgdboc/parameters/kgdboc

Turn it off:
    echo "" > /sys/module/kgdboc/parameters/kgdboc

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2010-05-20 21:04:24 -05:00
Jason Wessel
a0de055cf6 kgdb: gdb "monitor" -> kdb passthrough
One of the driving forces behind integrating another front end (kdb)
to the debug core is to allow front end commands to be accessible via
gdb's monitor command.  It is true that you could write gdb macros to
get certain data, but you may want to just use gdb to access the
commands that are available in the kdb front end.

This patch implements the Rcmd gdb stub packet.  In gdb you access
this with the "monitor" command.  For instance you could type "monitor
help", "monitor lsmod" or "monitor ps A" etc...

There is no error checking or command restrictions on what you can and
cannot access at this point.  Doing something like trying to set
breakpoints with the monitor command is going to cause nothing but
problems.  Perhaps in the future only the commands that are actually
known to work with the gdb monitor command will be available.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:24 -05:00
Jason Wessel
f5316b4aea kgdb,8250,pl011: Return immediately from console poll
The design of the kdb shell requires that every device that can
provide input to kdb have a polling routine that exits immediately if
there is no character available.  This is required in order to get the
page scrolling mechanism working.

Changing the kernel debugger I/O API to require all polling character
routines to exit immediately if there is no data allows the kernel
debugger to process multiple input channels.

NO_POLL_CHAR will be the return code to the polling routine when ever
there is no character available.

CC: linux-serial@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:22 -05:00
Jason Wessel
dcc7871128 kgdb: core changes to support kdb
These are the minimum changes to the kgdb core in order to enable an
API to connect a new front end (kdb) to the debug core.

This patch introduces the dbg_kdb_mode variable controls where the
user level I/O is routed.  It will be routed to the gdbstub (kgdb) or
to the kdb front end which is a simple shell available over the kgdboc
connection.

You can switch back and forth between kdb or the gdb stub mode of
operation dynamically.  From gdb stub mode you can blindly type
"$3#33", or from the kdb mode you can enter "kgdb" to switch to the
gdb stub.

The logic in the debug core depends on kdb to look for the typical gdb
connection sequences and return immediately with KGDB_PASS_EVENT if a
gdb serial command sequence is detected.  That should allow a
reasonably seamless transition between kdb -> gdb without leaving the
kernel exception state.  The two gdb serial queries that kdb is
responsible for detecting are the "?" and "qSupported" packets.

CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Martin Hicks <mort@sgi.com>
2010-05-20 21:04:21 -05:00
Jason Wessel
67fc4e0cb9 kdb: core for kgdb back end (2 of 2)
This patch contains the hooks and instrumentation into kernel which
live outside the kernel/debug directory, which the kdb core
will call to run commands like lsmod, dmesg, bt etc...

CC: linux-arch@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Martin Hicks <mort@sgi.com>
2010-05-20 21:04:21 -05:00
Jason Wessel
5d5314d679 kdb: core for kgdb back end (1 of 2)
This patch contains only the kdb core.  Because the change set was
large, it was split.  The next patch in the series includes the
instrumentation into the core kernel which are mainly helper functions
for kdb.

This work is directly derived from kdb v4.4 found at:

ftp://oss.sgi.com/projects/kdb/download/v4.4/

The kdb internals have been re-organized to make them mostly platform
independent and to connect everything to the debug core which is used by
gdbstub (which has long been known as kgdb).

The original version of kdb was 58,000 lines worth of changes to
support x86.  From that implementation only the kdb shell, and basic
commands for memory access, runcontrol, lsmod, and dmesg where carried
forward.

This is a generic implementation which aims to cover all the current
architectures using the kgdb core: ppc, arm, x86, mips, sparc, sh and
blackfin.  More archictectures can be added by implementing the
architecture specific kgdb functions.

[mort@sgi.com: Compile fix with hugepages enabled]
[mort@sgi.com: Clean breakpoint code renaming kdba_ -> kdb_]
[mort@sgi.com: fix new line after printing registers]
[mort@sgi.com: Remove the concept of global vs. local breakpoints]
[mort@sgi.com: Rework kdb_si_swapinfo to use more generic name]
[mort@sgi.com: fix the information dump macros, remove 'arch' from the names]
[sfr@canb.auug.org.au: include fixup to include linux/slab.h]

CC: linux-arch@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Martin Hicks <mort@sgi.com>
2010-05-20 21:04:20 -05:00
Jason Wessel
53197fc495 Separate the gdbstub from the debug core
Split the former kernel/kgdb.c into debug_core.c which contains the
kernel debugger exception logic and to the gdbstub.c which contains
the logic for allowing gdb to talk to the debug core.

This also created a private include file called debug_core.h which
contains all the definitions to glue the debug_core to any other
debugger connections.

CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:19 -05:00
Jason Wessel
c433820971 Move kernel/kgdb.c to kernel/debug/debug_core.c
Move kgdb.c in preparation to separate the gdbstub from the debug
core and exception handling.

CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:18 -05:00
Michal Nazarewicz
22c43c81a5 wait_event_interruptible_locked() interface
New wait_event_interruptible{,_exclusive}_locked{,_irq} macros added.
They work just like versions without _locked* suffix but require the
wait queue's lock to be held.  Also __wake_up_locked() is now exported
as to pair it with the above macros.

The use case of this new facility is when one uses wait queue's lock
to  protect a data structure.  This may be advantageous if the
structure needs to be protected by a spinlock anyway.  In particular,
with additional spinlock the following code has to be used to wait
for a condition:

spin_lock(&data.lock);
...
for (ret = 0; !ret && !(condition); ) {
	spin_unlock(&data.lock);
	ret = wait_event_interruptible(data.wqh, (condition));
	spin_lock(&data.lock);
}
...
spin_unlock(&data.lock);

This looks bizarre plus wait_event_interruptible() locks the wait
queue's lock anyway so there is a unlock+lock sequence where it could
be avoided.

To avoid those problems and benefit from wait queue's lock, a code
similar to the following should be used:

/* Waiting */
spin_lock(&data.wqh.lock);
...
ret = wait_event_interruptible_locked(data.wqh, (condition));
...
spin_unlock(&data.wqh.lock);

/* Waiting exclusively */
spin_lock(&data.whq.lock);
...
ret = wait_event_interruptible_exclusive_locked(data.whq, (condition));
...
spin_unlock(&data.whq.lock);

/* Waking up */
spin_lock(&data.wqh.lock);
...
wake_up_locked(&data.wqh);
...
spin_unlock(&data.wqh.lock);

When spin_lock_irq() is used matching versions of macros need to be
used (*_locked_irq()).

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:42 -07:00
Frederic Weisbecker
acd35a463c perf: Fix forgotten preempt_enable by nested writers
A writer that gets a reference to the buffer handle disables
preemption. When we put that reference, we check if we are
the outer most writer and if not, we simply return and defer
the head update to the outer most writer. The problem here
is that preemption is only reenabled by the outer most, that
produces preemption count imbalance for every nested writer
that exit.

So just don't forget to always re-enable preemption when we
put the buffer reference, whoever we are.

Fixes lots of sleeping in atomic warnings, visible with lock
events recording.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Robert Richter <robert.richter@amd.com>
2010-05-20 21:28:34 +02:00
Linus Torvalds
a0fe3cc5d3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: psmouse - small formatting changes to better follow coding style
  Input: synaptics - set dimensions as reported by firmware
  Input: elantech - relax signature checks
  Input: elantech - enforce common prefix on messages
  Input: wistron_btns - switch to using kmemdup()
  Input: usbtouchscreen - switch to using kmemdup()
  Input: do not force selecting i8042 on Moorestown
  Input: Documentation/sysrq.txt - update KEY_SYSRQ info
  Input: 88pm860x_onkey - remove invalid irq number assignment
  Input: i8042 - add a PNP entry to the aux device list
  Input: i8042 - add some extra PNP keyboard types
  Input: wm9712 - fix wm97xx_set_gpio() logic
  Input: add keypad driver for keys interfaced to TCA6416
  Input: remove obsolete {corgi,spitz,tosa}kbd.c
  Input: kbtab - do not advertise unsupported events
  Input: kbtab - simplify kbtab_disconnect()
  Input: kbtab - fix incorrect size parameter in usb_buffer_free
  Input: acecad - don't advertise mouse events
  Input: acecad - fix some formatting issues
  Input: acecad - simplify usb_acecad_disconnect()
  ...

Trivial conflict in Documentation/feature-removal-schedule.txt
2010-05-20 10:33:06 -07:00
Linus Torvalds
f39d01be4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...
2010-05-20 09:20:59 -07:00
Linus Torvalds
46ee964509 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: PM QOS update fix
  Freezer / cgroup freezer: Update stale locking comments
  PM / platform_bus: Allow runtime PM by default
  i2c: Fix bus-level power management callbacks
  PM QOS update
  PM / Hibernate: Fix block_io.c printk warning
  PM / Hibernate: Group swap ops
  PM / Hibernate: Move the first_sector out of swsusp_write
  PM / Hibernate: Separate block_io
  PM / Hibernate: Snapshot cleanup
  FS / libfs: Implement simple_write_to_buffer
  PM / Hibernate: document open(/dev/snapshot) side effects
  PM / Runtime: Add sysfs debug files
  PM: Improve device power management document
  PM: Update device power management document
  PM: Allow runtime_suspend methods to call pm_schedule_suspend()
  PM: pm_wakeup - switch to using bool
2010-05-20 09:03:55 -07:00
Linus Torvalds
fa5312d9e8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: change cancel_work_sync() to clear work->data
  workqueue: warn about flush_scheduled_work()
2010-05-20 09:03:02 -07:00
Linus Torvalds
96b5b7f4f2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (61 commits)
  KEYS: Return more accurate error codes
  LSM: Add __init to fixup function.
  TOMOYO: Add pathname grouping support.
  ima: remove ACPI dependency
  TPM: ACPI/PNP dependency removal
  security/selinux/ss: Use kstrdup
  TOMOYO: Use stack memory for pending entry.
  Revert "ima: remove ACPI dependency"
  Revert "TPM: ACPI/PNP dependency removal"
  KEYS: Do preallocation for __key_link()
  TOMOYO: Use mutex_lock_interruptible.
  KEYS: Better handling of errors from construct_alloc_key()
  KEYS: keyring_serialise_link_sem is only needed for keyring->keyring links
  TOMOYO: Use GFP_NOFS rather than GFP_KERNEL.
  ima: remove ACPI dependency
  TPM: ACPI/PNP dependency removal
  selinux: generalize disabling of execmem for plt-in-heap archs
  LSM Audit: rename LSM_AUDIT_NO_AUDIT to LSM_AUDIT_DATA_NONE
  CRED: Holding a spinlock does not imply the holding of RCU read lock
  SMACK: Don't #include Ext2 headers
  ...
2010-05-20 08:55:50 -07:00
Ingo Molnar
dfacc4d6c9 Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core 2010-05-20 14:38:55 +02:00
Frederic Weisbecker
49f135ed02 perf: Comply with new rcu checks API
The software events hlist doesn't fully comply with the new
rcu checks api.

We need to consider three different sides that access the hlist:

- the hlist allocation/release side. This side happens when an
  events is created or released, accesses to the hlist are
  serialized under the cpuctx mutex.

- the events insertion/removal in the hlist. This side is always
  serialized against the above one. The hlist is always present
  during such operations. This side happens when a software event
  is scheduled in/out. The serialization that ensures the software
  event is really attached to the context is made under the
  ctx->lock.

- events triggering. This is the read side, it can happen
  concurrently with any update side.

This patch deals with them one by one and anticipates with the
separate rcu mem space patches in preparation.

This patch fixes various annoying rcu warnings.

Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
2010-05-20 10:40:37 +02:00
Linus Torvalds
164d44fd92 Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: Add clocksource_register_hz/khz interface
  posix-cpu-timers: Optimize run_posix_cpu_timers()
  time: Remove xtime_cache
  mqueue: Convert message queue timeout to use hrtimers
  hrtimers: Provide schedule_hrtimeout for CLOCK_REALTIME
  timers: Introduce the concept of timer slack for legacy timers
  ntp: Remove tickadj
  ntp: Make time_adjust static
  time: Add xtime, wall_to_monotonic to feature-removal-schedule
  timer: Try to survive timer callback preempt_count leak
  timer: Split out timer function call
  timer: Print function name for timer callbacks modifying preemption count
  time: Clean up warp_clock()
  cpu-timers: Avoid iterating over all threads in fastpath_timer_check()
  cpu-timers: Change SIGEV_NONE timer implementation
  cpu-timers: Return correct previous timer reload value
  cpu-timers: Cleanup arm_timer()
  cpu-timers: Simplify RLIMIT_CPU handling
2010-05-19 17:11:10 -07:00
Linus Torvalds
6e0b7b2c39 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Clear CPU mask in affinity_hint when none is provided
  genirq: Add CPU mask affinity hint
  genirq: Remove IRQF_DISABLED from core code
  genirq: Run irq handlers with interrupts disabled
  genirq: Introduce request_any_context_irq()
  genirq: Expose irq_desc->node in proc/irq

Fixed up trivial conflicts in Documentation/feature-removal-schedule.txt
2010-05-19 17:09:40 -07:00
KOSAKI Motohiro
fa9dc265ac cpumask: fix compat getaffinity
Commit a45185d2d "cpumask: convert kernel/compat.c" broke libnuma, which
abuses sched_getaffinity to find out NR_CPUS in order to parse
/sys/devices/system/node/node*/cpumap.

On NUMA systems with less than 32 possibly CPUs, the current
compat_sys_sched_getaffinity now returns '4' instead of the actual
NR_CPUS/8, which makes libnuma bail out when parsing the cpumap.

The libnuma call sched_getaffinity(0, bitmap, 4096) at first.  It mean
the libnuma expect the return value of sched_getaffinity() is either len
argument or NR_CPUS.  But it doesn't expect to return nr_cpu_ids.

Strictly speaking, userland requirement are

1) Glibc assume the return value mean the lengh of initialized
   of mask argument. E.g. if sched_getaffinity(1024) return 128,
   glibc make zero fill rest 896 byte.
2) Libnuma assume the return value can be used to guess NR_CPUS
   in kernel. It assume len-arg<NR_CPUS makes -EINVAL. But
   it try len=4096 at first and 4096 is always bigger than
   NR_CPUS. Then, if we remove strange min_length normalization,
   we never hit -EINVAL case.

sched_getaffinity() already solved this issue.  This patch adapts
compat_sys_sched_getaffinity() to match the non-compat case.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Ken Werner <ken.werner@web.de>
Cc: stable@kernel.org
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-19 11:48:18 -07:00
Linus Torvalds
ba0234ec35 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (24 commits)
  [S390] drivers/s390/char: Use kmemdup
  [S390] drivers/s390/char: Use kstrdup
  [S390] debug: enable exception-trace debug facility
  [S390] s390_hypfs: Add new attributes
  [S390] qdio: remove API wrappers
  [S390] qdio: set correct bit in dsci
  [S390] qdio: dont convert timestamps to microseconds
  [S390] qdio: remove memset hack
  [S390] qdio: prevent starvation on PCI devices
  [S390] qdio: count number of qdio interrupts
  [S390] user space fault: report fault before calling do_exit
  [S390] topology: expose core identifier
  [S390] dasd: remove uid from devmap
  [S390] dasd: add dynamic pav toleration
  [S390] vdso: add missing vdso_install target
  [S390] vdso: remove redundant check for CONFIG_64BIT
  [S390] avoid default_llseek in s390 drivers
  [S390] vmcp: disallow modular build
  [S390] add breaking event address for user space
  [S390] virtualization aware cpu measurement
  ...
2010-05-19 11:35:30 -07:00
Dmitry Torokhov
8d0bc2b456 Merge commit 'v2.6.34' into next 2010-05-19 10:12:41 -07:00
Rusty Russell
480b02df3a module: drop the lock while waiting for module to complete initialization.
This fixes "gave up waiting for init of module libcrc32c." which
happened at boot time due to multiple parallel module loads.

The problem was a deadlock: we wait for a module to finish
initializing, but we keep the module_lock mutex so it can't complete.
In particular, this could reasonably happen if a module does a
request_module() in its initialization routine.

So we change use_module() to return an errno rather than a bool, and if
it's -EBUSY we drop the lock and wait in the caller, then reaquire the
lock.

Reported-by: Brandon Philips <brandon@ifup.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Brandon Philips <brandon@ifup.org>
2010-05-19 17:33:39 +09:30
Ben Hutchings
92946bc72f panic: Add taint flag TAINT_FIRMWARE_WORKAROUND ('I')
This taint flag will initially be used when warning about invalid ACPI
DMAR tables.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-19 08:37:43 +01:00
Ben Hutchings
b2be05273a panic: Allow warnings to set different taint flags
WARN() is used in some places to report firmware or hardware bugs that
are then worked-around.  These bugs do not affect the stability of the
kernel and should not set the flag for TAINT_WARN.  To allow for this,
add WARN_TAINT() and WARN_TAINT_ONCE() macros that take a taint number
as argument.

Architectures that implement warnings using trap instructions instead
of calls to warn_slowpath_*() now implement __WARN_TAINT(taint)
instead of __WARN().

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-19 08:36:48 +01:00
Tony Breeds
fd6be105b8 mutex: Fix optimistic spinning vs. BKL
Currently, we can hit a nasty case with optimistic
spinning on mutexes:

    CPU A tries to take a mutex, while holding the BKL

    CPU B tried to take the BLK while holding the mutex

This looks like a AB-BA scenario but in practice, is
allowed and happens due to the auto-release on
schedule() nature of the BKL.

In that case, the optimistic spinning code can get us
into a situation where instead of going to sleep, A
will spin waiting for B who is spinning waiting for
A, and the only way out of that loop is the
need_resched() test in mutex_spin_on_owner().

This patch fixes it by completely disabling spinning
if we own the BKL. This adds one more detail to the
extensive list of reasons why it's a bad idea for
kernel code to be holding the BKL.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <stable@kernel.org>
LKML-Reference: <20100519054636.GC12389@ozlabs.org>
[ added an unlikely() attribute to the branch ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-19 08:18:44 +02:00
David S. Miller
2ec8c6bb5d Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	include/linux/mod_devicetable.h
	scripts/mod/file2alias.c
2010-05-18 23:01:55 -07:00
Steffen Klassert
3789ae7dcd padata: Use get_online_cpus/put_online_cpus in padata_free
Add get_online_cpus/put_online_cpus to ensure that no cpu goes
offline during the flushing of the padata percpu queues.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19 13:45:35 +10:00
Steffen Klassert
0198ffd135 padata: Add some code comments
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19 13:44:27 +10:00
Steffen Klassert
2b73b07ab8 padata: Flush the padata queues actively
yield was used to wait until all references of the internal control
structure in use are dropped before it is freed. This patch implements
padata_flush_queues which actively flushes the padata percpu queues
in this case.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19 13:43:46 +10:00
Steffen Klassert
d46a5ac7a7 padata: Use a timer to handle remaining objects in the reorder queues
padata_get_next needs to check whether the next object that
need serialization must be parallel processed by the local cpu.
This check was wrong implemented and returned always true,
so the try_again loop in padata_reorder was never taken. This
can lead to object leaks in some rare cases due to a race that
appears with the trylock in padata_reorder. The try_again loop
was not a good idea after all, because a cpu could take that
loop frequently, so we handle this with a timer instead.

This patch adds a timer to handle the race that appears with
the trylock. If cpu1 queues an object to the reorder queue while
cpu2 holds the pd->lock but left the while loop in padata_reorder
already, cpu2 can't care for this object and cpu1 exits because
it can't get the lock. Usually the next cpu that takes the lock
cares for this object too. We need the timer just if this object
was the last one that arrives to the reorder queues. The timer
function sends it out in this case.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19 13:43:14 +10:00
Peter Zijlstra
6d1acfd5c6 perf: Optimize perf_output_*() by avoiding local_xchg()
Since the x86 XCHG ins implies LOCK, avoid the use by
using a sequence count instead.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18 18:35:49 +02:00
Peter Zijlstra
fa5881514e perf: Optimize the hotpath by converting the perf output buffer to local_t
Since there is now only a single writer, we can use
local_t instead and avoid all these pesky LOCK insn.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18 18:35:49 +02:00
Peter Zijlstra
ef60777c9a perf: Optimize the perf_output() path by removing IRQ-disables
Since we can now assume there is only a single writer
to each buffer, we can remove per-cpu lock thingy and
use a simply nest-count to the same effect.

This removes the need to disable IRQs.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18 18:35:48 +02:00
Peter Zijlstra
c7920614ce perf: Disallow mmap() on per-task inherited events
Since we now have working per-task-per-cpu events for
a while, disallow mmap() on per-task inherited
events. Those things were a performance problem
anyway, and doing away with it allows us to optimize
the buffer somewhat by assuming there is only a
single writer.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18 18:35:48 +02:00
Peter Zijlstra
a19d35c11f perf: Optimize buffer placement by allocating buffers NUMA aware
Ensure cpu bound buffers live on the right NUMA node.

Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1274114880.5605.5236.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18 18:35:47 +02:00
Stephane Eranian
00d1d0b095 perf: Fix errors path in perf_output_begin()
In case the sampling buffer has no "payload" pages,
nr_pages is 0. The problem is that the error path in
perf_output_begin() skips to a label which assumes
perf_output_lock() has been issued which is not the
case. That triggers a WARN_ON() in
perf_output_unlock().

This patch fixes the problem by skipping
perf_output_unlock() in case data->nr_pages is 0.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4bf13674.014fd80a.6c82.ffffb20c@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18 18:35:47 +02:00
Peter Zijlstra
4f41c013f5 perf/ftrace: Optimize perf/tracepoint interaction for single events
When we've got but a single event per tracepoint
there is no reason to try and multiplex it so don't.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18 18:35:46 +02:00
Linus Torvalds
752f114fb8 Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix "integer as NULL pointer" warning.
  tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header
  tracing: Make the documentation clear on trace_event boot option
  ring-buffer: Wrap open-coded WARN_ONCE
  tracing: Convert nop macros to static inlines
  tracing: Fix sleep time function profiling
  tracing: Show sample std dev in function profiling
  tracing: Add documentation for trace commands mod, traceon/traceoff
  ring-buffer: Make benchmark handle missed events
  ring-buffer: Make non-consuming read less expensive with lots of cpus.
  tracing: Add graph output support for irqsoff tracer
  tracing: Have graph flags passed in to ouput functions
  tracing: Add ftrace events for graph tracer
  tracing: Dump either the oops's cpu source or all cpus buffers
  tracing: Fix uninitialized variable of tracing/trace output
2010-05-18 08:35:04 -07:00
Linus Torvalds
b8ae30ee26 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
  stop_machine: Move local variable closer to the usage site in cpu_stop_cpu_callback()
  sched, wait: Use wrapper functions
  sched: Remove a stale comment
  ondemand: Make the iowait-is-busy time a sysfs tunable
  ondemand: Solve a big performance issue by counting IOWAIT time as busy
  sched: Intoduce get_cpu_iowait_time_us()
  sched: Eliminate the ts->idle_lastupdate field
  sched: Fold updating of the last_update_time_info into update_ts_time_stats()
  sched: Update the idle statistics in get_cpu_idle_time_us()
  sched: Introduce a function to update the idle statistics
  sched: Add a comment to get_cpu_idle_time_us()
  cpu_stop: add dummy implementation for UP
  sched: Remove rq argument to the tracepoints
  rcu: need barrier() in UP synchronize_sched_expedited()
  sched: correctly place paranioa memory barriers in synchronize_sched_expedited()
  sched: kill paranoia check in synchronize_sched_expedited()
  sched: replace migration_thread with cpu_stop
  stop_machine: reimplement using cpu_stop
  cpu_stop: implement stop_cpu[s]()
  sched: Fix select_idle_sibling() logic in select_task_rq_fair()
  ...
2010-05-18 08:27:54 -07:00
Linus Torvalds
4d7b4ac22f Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits)
  perf tools: Add mode to build without newt support
  perf symbols: symbol inconsistency message should be done only at verbose=1
  perf tui: Add explicit -lslang option
  perf options: Type check all the remaining OPT_ variants
  perf options: Type check OPT_BOOLEAN and fix the offenders
  perf options: Check v type in OPT_U?INTEGER
  perf options: Introduce OPT_UINTEGER
  perf tui: Add workaround for slang < 2.1.4
  perf record: Fix bug mismatch with -c option definition
  perf options: Introduce OPT_U64
  perf tui: Add help window to show key associations
  perf tui: Make <- exit menus too
  perf newt: Add single key shortcuts for zoom into DSO and threads
  perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed
  perf newt: Fix the 'A'/'a' shortcut for annotate
  perf newt: Make <- exit the ui_browser
  x86, perf: P4 PMU - fix counters management logic
  perf newt: Make <- zoom out filters
  perf report: Report number of events, not samples
  perf hist: Clarify events_stats fields usage
  ...

Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
2010-05-18 08:19:03 -07:00
Linus Torvalds
3aaf51ace5 Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
  oprofile/x86: make AMD IBS hotplug capable
  oprofile/x86: notify cpus only when daemon is running
  oprofile/x86: reordering some functions
  oprofile/x86: stop disabled counters in nmi handler
  oprofile/x86: protect cpu hotplug sections
  oprofile/x86: remove CONFIG_SMP macros
  oprofile/x86: fix uninitialized counter usage during cpu hotplug
  oprofile/x86: remove duplicate IBS capability check
  oprofile/x86: move IBS code
  oprofile/x86: return -EBUSY if counters are already reserved
  oprofile/x86: moving shutdown functions
  oprofile/x86: reserve counter msrs pairwise
  oprofile/x86: rework error handler in nmi_setup()
  oprofile: update file list in MAINTAINERS file
  oprofile: protect from not being in an IRQ context
  oprofile: remove double ring buffering
  ring-buffer: Add lost event count to end of sub buffer
  tracing: Show the lost events in the trace_pipe output
  ring-buffer: Add place holder recording of dropped events
  tracing: Fix compile error in module tracepoints when MODULE_UNLOAD not set
  ...
2010-05-18 08:18:07 -07:00
Linus Torvalds
f262af3d08 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
  rcu: remove all rcu head initializations, except on_stack initializations
  rcu head introduce rcu head init on stack
  Debugobjects transition check
  rcu: fix build bug in RCU_FAST_NO_HZ builds
  rcu: RCU_FAST_NO_HZ must check RCU dyntick state
  rcu: make SRCU usable in modules
  rcu: improve the RCU CPU-stall warning documentation
  rcu: reduce the number of spurious RCU_SOFTIRQ invocations
  rcu: permit discontiguous cpu_possible_mask CPU numbering
  rcu: improve RCU CPU stall-warning messages
  rcu: print boot-time console messages if RCU configs out of ordinary
  rcu: disable CPU stall warnings upon panic
  rcu: enable CPU_STALL_VERBOSE by default
  rcu: slim down rcutiny by removing rcu_scheduler_active and friends
  rcu: refactor RCU's context-switch handling
  rcu: rename rcutiny rcu_ctrlblk to rcu_sched_ctrlblk
  rcu: shrink rcutiny by making synchronize_rcu_bh() be inline
  rcu: fix now-bogus rcu_scheduler_active comments.
  rcu: Fix bogus CONFIG_PROVE_LOCKING in comments to reflect reality.
  rcu: ignore offline CPUs in last non-dyntick-idle CPU check
  ...
2010-05-18 08:17:58 -07:00
Linus Torvalds
1014cfe2fb Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: Reduce stack_trace usage
  lockdep: No need to disable preemption in debug atomic ops
  lockdep: Actually _dec_ in debug_atomic_dec
  lockdep: Provide off case for redundant_hardirqs_on increment
  lockdep: Simplify debug atomic ops
  lockdep: Fix redundant_hardirqs_on incremented with irqs enabled
  lockstat: Make lockstat counting per cpu
  i8253: Convert i8253_lock to raw_spinlock
2010-05-18 08:17:35 -07:00
James Bottomley
95bb335c0e [SCSI] Merge scsi-misc-2.6 into scsi-rc-fixes-2.6
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-18 10:37:41 -04:00
Steven Rostedt
f0218b3e99 Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into trace/tip/tracing/core-6
Conflicts:
	include/trace/ftrace.h
	kernel/trace/trace_kprobe.c

Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-18 00:35:23 -04:00
James Morris
539c99fd7f Merge branch 'next' into for-linus 2010-05-18 08:57:00 +10:00
Ingo Molnar
9c6f7e43b4 stop_machine: Move local variable closer to the usage site in cpu_stop_cpu_callback()
This addresses the following compiler warning:

 kernel/stop_machine.c: In function 'cpu_stop_cpu_callback':
 kernel/stop_machine.c:297: warning: unused variable 'work'

Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <tip-3fc1f1e27a5b807791d72e5d992aa33b668a6626@git.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18 00:17:44 +02:00
Linus Torvalds
3d2c978e0c Merge branch 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing
* 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  ptrace: Cleanup useless header
  ptrace: kill BKL in ptrace syscall
2010-05-17 13:48:10 -07:00
Heiko Carstens
ab3c68ee5f [S390] debug: enable exception-trace debug facility
The exception-trace facility on x86 and other architectures prints
traces to dmesg whenever a user space application crashes.
s390 has such a feature since ages however it is called
userprocess_debug and is enabled differently.
This patch makes sure that whenever one of the two procfs files

/proc/sys/kernel/userprocess_debug
/proc/sys/debug/exception-trace

is modified the contents of the second one changes as well.
That way we keep backwards compatibilty but also support the same
interface like other architectures do.
Besides that the output of the traces is improved since it will now
also contain the corresponding filename of the vma (when available)
where the process caused a fault or trap.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 10:00:17 +02:00
Mark Gross
25f3a5a285 PM: PM QOS update fix
This update handles a use case where pm_qos update requests need to
silently fail if the update is being sent to a handle that is NULL.

The problem was that the original pm_qos silently fails when a request
update is passed to a parameter that has not been added to the list yet.
This update restores that behavior.

Signed-off-by: markgross <markgross@thegnar.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-17 00:21:03 +02:00
Octavian Purdila
9f977fb7ae sysctl: add proc_do_large_bitmap
The new function can be used to read/write large bitmaps via /proc. A
comma separated range format is used for compact output and input
(e.g. 1,3-4,10-10).

Writing into the file will first reset the bitmap then update it
based on the given input.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-15 23:28:39 -07:00
Amerigo Wang
00b7c3395a sysctl: refactor integer handling proc code
(Based on Octavian's work, and I modified a lot.)

As we are about to add another integer handling proc function a little
bit of cleanup is in order: add a few helper functions to improve code
readability and decrease code duplication.

In the process a bug is also fixed: if the user specifies a number
with more then 20 digits it will be interpreted as two integers
(e.g. 10000...13 will be interpreted as 100.... and 13).

Behavior for EFAULT handling was changed as well. Previous to this
patch, when an EFAULT error occurred in the middle of a write
operation, although some of the elements were set, that was not
acknowledged to the user (by shorting the write and returning the
number of bytes accepted). EFAULT is now treated just like any other
errors by acknowledging the amount of bytes accepted.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-15 23:28:38 -07:00
Hugh Dickins
16a2164bb0 profile: fix stats and data leakage
If the kernel is large or the profiling step small, /proc/profile
leaks data and readprofile shows silly stats, until readprofile -r
has reset the buffer: clear the prof_buffer when it is vmalloc()ed.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-14 19:45:06 -07:00
Li Zefan
e1f7992e01 tracing: Fix function declarations if !CONFIG_STACKTRACE
ftrace_trace_stack() and frace_trace_userstacke() take a
struct ring_buffer argument, not struct trace_array. Commit
e77405ad("tracing: pass around ring buffer instead of tracer")
made this change.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BE77C14.5010806@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:33:24 -04:00
Steven Rostedt
553552ce17 tracing: Combine event filter_active and enable into single flags field
The filter_active and enable both use an int (4 bytes each) to
set a single flag. We can save 4 bytes per event by combining the
two into a single integer.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4894944	1018052	 861512	6774508	 675eec	vmlinux.id
4894871	1012292	 861512	6768675	 674823	vmlinux.flags

This gives us another 5K in savings.

The modification of both the enable and filter fields are done
under the event_mutex, so it is still safe to combine the two.

Note: Although Mathieu gave his Acked-by, he would like it documented
 that the reads of flags are not protected by the mutex. The way the
 code works, these reads will not break anything, but will have a
 residual effect. Since this behavior is the same even before this
 patch, describing this situation is left to another patch, as this
 patch does not change the behavior, but just brought it to Mathieu's
 attention.

v2: Updated the event trace self test to for this change.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:33:22 -04:00
Steven Rostedt
32c0edaeaa tracing: Remove duplicate id information in event structure
Now that the trace_event structure is embedded in the ftrace_event_call
structure, there is no need for the ftrace_event_call id field.
The id field is the same as the trace_event type field.

Removing the id and re-arranging the structure brings down the tracepoint
footprint by another 5K.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4895024	1023812	 861512	6780348	 6775bc	vmlinux.print
4894944	1018052	 861512	6774508	 675eec	vmlinux.id

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:33:15 -04:00
Steven Rostedt
80decc70af tracing: Move print functions into event class
Currently, every event has its own trace_event structure. This is
fine since the structure is needed anyway. But the print function
structure (trace_event_functions) is now separate. Since the output
of the trace event is done by the class (with the exception of events
defined by DEFINE_EVENT_PRINT), it makes sense to have the class
define the print functions that all events in the class can use.

This makes a bigger deal with the syscall events since all syscall events
use the same class. The savings here is another 30K.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init
4900446	1049028	 861512	6810986	 67ed6a	vmlinux.preprint
4895024	1023812	 861512	6780348	 6775bc	vmlinux.print

To accomplish this, and to let the class know what event is being
printed, the event structure is embedded in the ftrace_event_call
structure. This should not be an issues since the event structure
was created for each event anyway.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:20:34 -04:00
Steven Rostedt
a9a5776380 tracing: Allow events to share their print functions
Multiple events may use the same method to print their data.
Instead of having all events have a pointer to their print funtions,
the trace_event structure now points to a trace_event_functions structure
that will hold the way to print ouf the event.

The event itself is now passed to the print function to let the print
function know what kind of event it should print.

This opens the door to consolidating the way several events print
their output.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init
4900446	1049028	 861512	6810986	 67ed6a	vmlinux.preprint

This change slightly increases the size but is needed for the next change.

v3: Fix the branch tracer events to handle this change.

v2: Fix the new function graph tracer event calls to handle this change.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:20:32 -04:00
Steven Rostedt
0405ab80aa tracing: Move raw_init from events to class
The raw_init function pointer in the event is used to initialize
various kinds of events. The type of initialization needed is usually
classed to the kind of event it is.

Two events with the same class will always have the same initialization
function, so it makes sense to move this to the class structure.

Perhaps even making a special system structure would work since
the initialization is the same for all events within a system.
But since there's no system structure (yet), this will just move it
to the class.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900375	1053380	 861512	6815267	 67fe23	vmlinux.fields
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init

The text grew very slightly, but this is a constant growth that happened
with the changing of the C files that call the init code.
The bigger savings is the data which will be saved the more events share
a class.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:20:30 -04:00
Steven Rostedt
2e33af0295 tracing: Move fields from event to class structure
Move the defined fields from the event to the class structure.
Since the fields of the event are defined by the class they belong
to, it makes sense to have the class hold the information instead
of the individual events. The events of the same class would just
hold duplicate information.

After this change the size of the kernel dropped another 3K:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900252	1057412	 861512	6819176	 680d68	vmlinux.regs
4900375	1053380	 861512	6815267	 67fe23	vmlinux.fields

Although the text increased, this was mainly due to the C files
having to adapt to the change. This is a constant increase, where
new tracepoints will not increase the Text. But the big drop is
in the data size (as well as needed allocations to hold the fields).
This will give even more savings as more tracepoints are created.

Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS()
with several DEFINE_EVENT()s, then the savings will be lost. But
we are pushing developers to consolidate events with DEFINE_EVENT()
so this should not be an issue.

The kprobes define a unique class to every new event, but are dynamic
so it should not be a issue.

The syscalls however have a single class but the fields for the individual
events are different. The syscalls use a metadata to define the
fields. I moved the fields list from the event to the metadata and
added a "get_fields()" function to the class. This function is used
to find the fields. For normal events and kprobes, get_fields() just
returns a pointer to the fields list_head in the class. For syscall
events, it returns the fields list_head in the metadata for the event.

v2:  Fixed the syscall fields. The syscall metadata needs a list
     of fields for both enter and exit.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:20:23 -04:00
Steven Rostedt
2239291aeb tracing: Remove per event trace registering
This patch removes the register functions of TRACE_EVENT() to enable
and disable tracepoints. The registering of a event is now down
directly in the trace_events.c file. The tracepoint_probe_register()
is now called directly.

The prototypes are no longer type checked, but this should not be
an issue since the tracepoints are created automatically by the
macros. If a prototype is incorrect in the TRACE_EVENT() macro, then
other macros will catch it.

The trace_event_class structure now holds the probes to be called
by the callbacks. This removes needing to have each event have
a separate pointer for the probe.

To handle kprobes and syscalls, since they register probes in a
different manner, a "reg" field is added to the ftrace_event_class
structure. If the "reg" field is assigned, then it will be called for
enabling and disabling of the probe for either ftrace or perf. To let
the reg function know what is happening, a new enum (trace_reg) is
created that has the type of control that is needed.

With this new rework, the 82 kernel events and 618 syscall events
has their footprint dramatically lowered:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint
4900252	1057412	 861512	6819176	 680d68	vmlinux.regs

The size went from 6863829 to 6819176, that's a total of 44K
in savings. With tracepoints being continuously added, this is
critical that the footprint becomes minimal.

v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf
    specific structure in trace_events.c.

v4: Fixed trace self tests to check probe because regfunc no longer
    exists.

v3: Updated to handle void *data in beginning of probe parameters.
    Also added the tracepoint: check_trace_callback_type_##call().

v2: Changed the callback probes to pass void * and typecast the
    value within the function.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:19:14 -04:00
Steven Rostedt
38516ab59f tracing: Let tracepoints have data passed to tracepoint callbacks
This patch adds data to be passed to tracepoint callbacks.

The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:

DECLARE_TRACE(mytracepoint, int value, value)

Will create the register function:

int register_trace_mytracepoint((void(*)(void *data, int value))probe,
                                void *data);

As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:

void myprobe(void *data, int value)
{
}

The callback may choose to ignore the data parameter.

This change allows callbacks to register a private data pointer along
with the function probe.

	void mycallback(void *data, int value);

	register_trace_mytracepoint(mycallback, mydata);

Then the mycallback() will receive the "mydata" as the first parameter
before the args.

A more detailed example:

  DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  /* In the C file */

  DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  [...]

       trace_mytracepoint(status);

  /* In a file registering this tracepoint */

  int my_callback(void *data, int status)
  {
	struct my_struct my_data = data;
	[...]
  }

  [...]
	my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
	init_my_data(my_data);
	register_trace_mytracepoint(my_callback, my_data);

The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:

	unregister_trace_mytracepoint(my_callback, my_data);

Because of the data parameter, tracepoints declared this way can not have
no args. That is:

  DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());

will cause an error.

If no arguments are needed, a new macro can be used instead:

  DECLARE_TRACE_NOARGS(mytracepoint);

Since there are no arguments, the proto and args fields are left out.

This is part of a series to make the tracepoint footprint smaller:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint

Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.

 v5: Fixed net/core/drop_monitor.c to handle these updates.

 v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
     #ifdef CONFIG_TRACE_POINTS, since the two are the same in both
     cases. The __DECLARE_TRACE() is what changes.
     Thanks to Frederic Weisbecker for pointing this out.

 v3: Made all register_* functions require data to be passed and
     all callbacks to take a void * parameter as its first argument.
     This makes the calling functions comply with C standards.

     Also added more comments to the modifications of DECLARE_TRACE().

 v2: Made the DECLARE_TRACE() have the ability to pass arguments
     and added a new DECLARE_TRACE_NOARGS() for tracepoints that
     do not need any arguments.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 09:50:34 -04:00
Steven Rostedt
8f08201830 tracing: Create class struct for events
This patch creates a ftrace_event_class struct that event structs point to.
This class struct will be made to hold information to modify the
events. Currently the class struct only holds the events system name.

This patch slightly increases the size, but this change lays the ground work
of other changes to make the footprint of tracepoints smaller.

With 82 standard tracepoints, and 618 system call tracepoints
(two tracepoints per syscall: enter and exit):

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class

This patch also cleans up some stale comments in ftrace.h.

v2: Fixed missing semi-colon in macro.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 09:33:49 -04:00
Steven Rostedt
23e117fa44 Merge branch 'sched/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into trace/tip/tracing/core-4 2010-05-14 09:29:52 -04:00
Ingo Molnar
ad56b0797e Merge commit 'v2.6.34-rc7' into tracing/core
Merge reason: Update from -rc5 to -rc7.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-13 08:11:29 +02:00
Peter P Waskiewicz Jr
4308ad8011 genirq: Clear CPU mask in affinity_hint when none is provided
When an interrupt is disabled and torn down, the CPU mask returned
through affinity_hint right now is all CPUs. Also, for drivers that
don't provide an affinity_hint mask, this can be misleading. There
should be no hint at all, meaning an empty CPU mask.

[ tglx: use zalloc_cpumask_var instead of clearing it under the lock ]

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Cc: davem@davemloft.net
Cc: arjan@linux.jf.intel.com
Cc: bhutchings@solarflare.com
LKML-Reference: <20100505205638.5426.87189.stgit@ppwaskie-hc2.jf.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-05-12 11:23:34 +02:00
David S. Miller
278554bd65 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/wireless/ath/ar9170/usb.c
	drivers/scsi/iscsi_tcp.c
	net/ipv4/ipmr.c
2010-05-12 00:05:35 -07:00
KAMEZAWA Hiroyuki
747388d78a memcg: fix css_is_ancestor() RCU locking
Some callers (in memcontrol.c) calls css_is_ancestor() without
rcu_read_lock.  Because css_is_ancestor() has to access RCU protected
data, it should be under rcu_read_lock().

This makes css_is_ancestor() itself does safe access to RCU protected
area.  (At least, "root" can have refcnt==0 if it's not an ancestor of
"child".  So, we need rcu_read_lock().)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-11 17:33:42 -07:00
KAMEZAWA Hiroyuki
7f0f154641 memcg: fix css_id() RCU locking for real
Commit ad4ba37537 ("memcg: css_id() must be
called under rcu_read_lock()") modifies memcontol.c for fixing RCU check
message.  But Andrew Morton pointed out that the fix doesn't seems sane
and it was just for hidining lockdep messages.

This is a patch for do proper things.  Checking again, all places,
accessing without rcu_read_lock, that commit fixies was intentional....
all callers of css_id() has reference count on it.  So, it's not necessary
to be under rcu_read_lock().

Considering again, we can use rcu_dereference_check for css_id().  We know
css->id is valid if css->refcnt > 0.  (css->id never changes and freed
after css->refcnt going to be 0.)

This patch makes use of rcu_dereference_check() in css_id/depth and remove
unnecessary rcu-read-lock added by the commit.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-11 17:33:42 -07:00
Vitaliy Gusev
11cad320a4 bsdacct: use del_timer_sync() in acct_exit_ns()
acct_exit_ns --> acct_file_reopen deletes timer without check timer
execution on other CPUs.  So acct_timeout() can change an unmapped memory.

Signed-off-by: Vitaliy Gusev <vgusev@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-11 17:33:42 -07:00
Vitaly Mayatskikh
475f9aa6aa kexec: fix OOPS in crash_kernel_shrink
Two "echo 0 > /sys/kernel/kexec_crash_size" OOPSes kernel.  Also content
of this file is invalid after first shrink to zero: it shows 1 instead of
0.

This scenario is unlikely to happen often (root privs, valid crashkernel=
in cmdline, dump-capture kernel not loaded), I hit it only by chance.

This patch fixes it.

Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-11 17:33:42 -07:00
Robin Holt
34441427aa revert "procfs: provide stack information for threads" and its fixup commits
Originally, commit d899bf7b ("procfs: provide stack information for
threads") attempted to introduce a new feature for showing where the
threadstack was located and how many pages are being utilized by the
stack.

Commit c44972f1 ("procfs: disable per-task stack usage on NOMMU") was
applied to fix the NO_MMU case.

Commit 89240ba0 ("x86, fs: Fix x86 procfs stack information for threads on
64-bit") was applied to fix a bug in ia32 executables being loaded.

Commit 9ebd4eba7 ("procfs: fix /proc/<pid>/stat stack pointer for kernel
threads") was applied to fix a bug which had kernel threads printing a
userland stack address.

Commit 1306d603f ('proc: partially revert "procfs: provide stack
information for threads"') was then applied to revert the stack pages
being used to solve a significant performance regression.

This patch nearly undoes the effect of all these patches.

The reason for reverting these is it provides an unusable value in
field 28.  For x86_64, a fork will result in the task->stack_start
value being updated to the current user top of stack and not the stack
start address.  This unpredictability of the stack_start value makes
it worthless.  That includes the intended use of showing how much stack
space a thread has.

Other architectures will get different values.  As an example, ia64
gets 0.  The do_fork() and copy_process() functions appear to treat the
stack_start and stack_size parameters as architecture specific.

I only partially reverted c44972f1 ("procfs: disable per-task stack usage
on NOMMU") .  If I had completely reverted it, I would have had to change
mm/Makefile only build pagewalk.o when CONFIG_PROC_PAGE_MONITOR is
configured.  Since I could not test the builds without significant effort,
I decided to not change mm/Makefile.

I only partially reverted 89240ba0 ("x86, fs: Fix x86 procfs stack
information for threads on 64-bit") .  I left the KSTK_ESP() change in
place as that seemed worthwhile.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-11 17:33:41 -07:00
Paul E. McKenney
72d5a9f7a9 rcu: remove all rcu head initializations, except on_stack initializations
Remove all rcu head inits. We don't care about the RCU head state before passing
it to call_rcu() anyway. Only leave the "on_stack" variants so debugobjects can
keep track of objects on stack.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-11 16:10:47 -07:00
Alan Cox
8b6d043b7e resource: shared I/O region support
SuperIO devices share regions and use lock/unlock operations to chip
select.  We therefore need to be able to request a resource and wait for
it to be freed by whichever other SuperIO device currently hogs it.
Right now you have to poll which is horrible.

Add a MUXED field to IO port resources. If the MUXED field is set on the
resource and on the request (via request_muxed_region) then we block
until the previous owner of the muxed resource releases their region.

This allows us to implement proper resource sharing and locking for
superio chips using code of the form

enable_my_superio_dev() {
	request_muxed_region(0x44, 0x02, "superio:watchdog");
	outb() ..sequence to enable chip
}

disable_my_superio_dev() {
	outb() .. sequence of disable chip
	release_region(0x44, 0x02);
}

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:10 -07:00
Changli Gao
a93d2f1744 sched, wait: Use wrapper functions
epoll should not touch flags in wait_queue_t. This patch introduces a new
function __add_wait_queue_exclusive(), for the users, who use wait queue as a
LIFO queue.

__add_wait_queue_tail_exclusive() is introduced too instead of
add_wait_queue_exclusive_locked(). remove_wait_queue_locked() is removed, as
it is a duplicate of __remove_wait_queue(), disliked by users, and with less
users.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: <containers@lists.linux-foundation.org>
LKML-Reference: <1273214006-2979-1-git-send-email-xiaosuo@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-11 17:43:58 +02:00
Peter Zijlstra
96c21a460a perf: Fix exit() vs event-groups
Corey reported that the value scale times of group siblings are not
updated when the monitored task dies.

The problem appears to be that we only update the group leader's
time values, fix it by updating the whole group.

Reported-by: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org> # .34.x
LKML-Reference: <1273588935.1810.6.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-11 17:08:24 +02:00
Peter Zijlstra
050735b08c perf: Fix exit() vs PERF_FORMAT_GROUP
Both Stephane and Corey reported that PERF_FORMAT_GROUP didn't
work as expected if the task the counters were attached to quit
before the read() call.

The cause is that we unconditionally destroy the grouping when
we remove counters from their context. Fix this by splitting off
the group destroy from the list removal such that
perf_event_remove_from_context() does not do this and change
perf_event_release() to do so.

Reported-by: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org> # .34.x
LKML-Reference: <1273571513.5605.3527.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-11 15:46:43 +02:00
Ingo Molnar
e3174cfd2a Revert "perf: Fix exit() vs PERF_FORMAT_GROUP"
This reverts commit 4fd38e4595.

It causes various crashes and hangs when events are activated.

The cause is not fully understood yet but we need to revert it
because the effects are severe.

Reported-by: Stephane Eranian <eranian@google.com>
Reported-by: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-11 08:31:49 +02:00
Matt Helsley
8f77578cc2 Freezer / cgroup freezer: Update stale locking comments
Update stale comments regarding locking order and add a little more detail
so it's easier to follow the locking between the cgroup freezer and the
power management freezer code.

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:18:47 +02:00
Mark Gross
ed77134bfc PM QOS update
This patch changes the string based list management to a handle base
implementation to help with the hot path use of pm-qos, it also renames
much of the API to use "request" as opposed to "requirement" that was
used in the initial implementation.  I did this because request more
accurately represents what it actually does.

Also, I added a string based ABI for users wanting to use a string
interface.  So if the user writes 0xDDDDDDDD formatted hex it will be
accepted by the interface.  (someone asked me for it and I don't think
it hurts anything.)

This patch updates some documentation input I got from Randy.

Signed-off-by: markgross <mgross@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:19 +02:00
Randy Dunlap
0fef8b1e83 PM / Hibernate: Fix block_io.c printk warning
Fix printk format warning in block_io.c:

kernel/power/block_io.c:41: warning: format '%ld' expects type 'long int', but argument 2 has type 'sector_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:18 +02:00
Jiri Slaby
6f612af578 PM / Hibernate: Group swap ops
Move all the swap processing into one function. It will make swap
calls from a non-swap code easier.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:18 +02:00
Jiri Slaby
51fb352b2c PM / Hibernate: Move the first_sector out of swsusp_write
The first sector knowledge is swap-only specific. Move it into the
swap handle. This will be needed for later non-swap specific code
moving into snapshot.c.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
2010-05-10 23:08:18 +02:00
Jiri Slaby
8a0d613fa1 PM / Hibernate: Separate block_io
Move block I/O operations to a separate file. It is because it will
be used later not only by the swap writer.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:18 +02:00
Jiri Slaby
d3c1b24c50 PM / Hibernate: Snapshot cleanup
Remove support of reads with offset. This means snapshot_read/write_next
now does not accept count parameter. It allows to clean up the functions
and snapshot handle which no longer needs to care about offsets.

/dev/snapshot handler is converted to simple_{read_from,write_to}_buffer
which take care of offsets.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:17 +02:00
Paul E. McKenney
d822ed1094 rcu: fix build bug in RCU_FAST_NO_HZ builds
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:35 -07:00
Paul E. McKenney
77e38ed347 rcu: RCU_FAST_NO_HZ must check RCU dyntick state
The current version of RCU_FAST_NO_HZ reproduces the old CLASSIC_RCU
dyntick-idle bug, as it fails to detect CPUs that have interrupted
or NMIed out of dyntick-idle mode.  Fix this by making rcu_needs_cpu()
check the state in the per-CPU rcu_dynticks variables, thus correctly
detecting the dyntick-idle state from an RCU perspective.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:35 -07:00
Paul E. McKenney
d21670acab rcu: reduce the number of spurious RCU_SOFTIRQ invocations
Lai Jiangshan noted that up to 10% of the RCU_SOFTIRQ are spurious, and
traced this down to the fact that the current grace-period machinery
will uselessly raise RCU_SOFTIRQ when a given CPU needs to go through
a quiescent state, but has not yet done so.  In this situation, there
might well be nothing that RCU_SOFTIRQ can do, and the overhead can be
worth worrying about in the ksoftirqd case.  This patch therefore avoids
raising RCU_SOFTIRQ in this situation.

Changes since v1 (http://lkml.org/lkml/2010/3/30/122 from Lai Jiangshan):

o	Omit the rcu_qs_pending() prechecks, as they aren't that
	much less expensive than the quiescent-state checks.

o	Merge with the set_need_resched() patch that reduces IPIs.

o	Add the new n_rp_report_qs field to the rcu_pending tracing output.

o	Update the tracing documentation accordingly.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:35 -07:00
Paul E. McKenney
4a90a0681c rcu: permit discontiguous cpu_possible_mask CPU numbering
TREE_RCU assumes that CPU numbering is contiguous, but some users need
large holes in the numbering to better map to hardware layout.  This patch
makes TREE_RCU (and TREE_PREEMPT_RCU) tolerate large holes in the CPU
numbering.  However, NR_CPUS must still be greater than the largest
CPU number.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:35 -07:00
Paul E. McKenney
4300aa642c rcu: improve RCU CPU stall-warning messages
The existing RCU CPU stall-warning messages can be confusing, especially
in the case where one CPU detects a single other stalled CPU.  In addition,
the console messages did not say which flavor of RCU detected the stall,
which can make it difficult to work out exactly what is causing the stall.
This commit improves these messages.

Requested-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:34 -07:00
Paul E. McKenney
26845c2860 rcu: print boot-time console messages if RCU configs out of ordinary
Print boot-time messages if tracing is enabled, if fanout is set
to non-default values, if exact fanout is specified, if accelerated
dyntick-idle grace periods have been enabled, if RCU-lockdep is enabled,
if rcutorture has been boot-time enabled, if the CPU stall detector has
been disabled, or if four-level hierarchy has been enabled.

This is all for TREE_RCU and TREE_PREEMPT_RCU.  TINY_RCU will be handled
separately, if at all.

Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:34 -07:00
Paul E. McKenney
c68de2097a rcu: disable CPU stall warnings upon panic
The current RCU CPU stall warnings remain enabled even after a panic
occurs, which some people have found to be a bit counterproductive.
This patch therefore uses a notifier to disable stall warnings once a
panic occurs.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:34 -07:00
Paul E. McKenney
bbad937983 rcu: slim down rcutiny by removing rcu_scheduler_active and friends
TINY_RCU does not need rcu_scheduler_active unless CONFIG_DEBUG_LOCK_ALLOC.
So conditionally compile rcu_scheduler_active in order to slim down
rcutiny a bit more.  Also gets rid of an EXPORT_SYMBOL_GPL, which is
responsible for most of the slimming.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:34 -07:00
Paul E. McKenney
25502a6c13 rcu: refactor RCU's context-switch handling
The addition of preemptible RCU to treercu resulted in a bit of
confusion and inefficiency surrounding the handling of context switches
for RCU-sched and for RCU-preempt.  For RCU-sched, a context switch
is a quiescent state, pure and simple, just like it always has been.
For RCU-preempt, a context switch is in no way a quiescent state, but
special handling is required when a task blocks in an RCU read-side
critical section.

However, the callout from the scheduler and the outer loop in ksoftirqd
still calls something named rcu_sched_qs(), whose name is no longer
accurate.  Furthermore, when rcu_check_callbacks() notes an RCU-sched
quiescent state, it ends up unnecessarily (though harmlessly, aside
from the performance hit) enqueuing the current task if it happens to
be running in an RCU-preempt read-side critical section.  This not only
increases the maximum latency of scheduler_tick(), it also needlessly
increases the overhead of the next outermost rcu_read_unlock() invocation.

This patch addresses this situation by separating the notion of RCU's
context-switch handling from that of RCU-sched's quiescent states.
The context-switch handling is covered by rcu_note_context_switch() in
general and by rcu_preempt_note_context_switch() for preemptible RCU.
This permits rcu_sched_qs() to handle quiescent states and only quiescent
states.  It also reduces the maximum latency of scheduler_tick(), though
probably by much less than a microsecond.  Finally, it means that tasks
within preemptible-RCU read-side critical sections avoid incurring the
overhead of queuing unless there really is a context switch.

Suggested-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
2010-05-10 11:08:33 -07:00
Paul E. McKenney
99652b54de rcu: rename rcutiny rcu_ctrlblk to rcu_sched_ctrlblk
Make naming line up in preparation for CONFIG_TINY_PREEMPT_RCU.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:32 -07:00
Paul E. McKenney
da848c47bc rcu: shrink rcutiny by making synchronize_rcu_bh() be inline
Because synchronize_rcu_bh() is identical to synchronize_sched(),
make the former a static inline invoking the latter, saving the
overhead of an EXPORT_SYMBOL_GPL() and the duplicate code.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:32 -07:00
Lai Jiangshan
5db356736a rcu: ignore offline CPUs in last non-dyntick-idle CPU check
Offline CPUs are not in nohz_cpu_mask, but can be ignored when checking
for the last non-dyntick-idle CPU.  This patch therefore only checks
online CPUs for not being dyntick idle, allowing fast entry into
full-system dyntick-idle state even when there are some offline CPUs.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:31 -07:00
Lai Jiangshan
0c34029abd rcu: move some code from macro to function
Shrink the RCU_INIT_FLAVOR() macro by moving all but the initialization
of the ->rda[] array to rcu_init_one().  The call to rcu_init_one()
can then be moved to the end of the RCU_INIT_FLAVOR() macro, which is
required because rcu_boot_init_percpu_data(), which is now called from
rcu_init_one(), depends on the initialization of the ->rda[] array.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:31 -07:00
Lai Jiangshan
f261414f0d rcu: make dead code really dead
cleanup: make dead code really dead

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:31 -07:00
Paul E. McKenney
d25eb9442b rcu: substitute set_need_resched for sending resched IPIs
This patch adds a check to __rcu_pending() that does a local
set_need_resched() if the current CPU is holding up the current grace
period and if force_quiescent_state() will be called soon.  The goal is
to reduce the probability that force_quiescent_state() will need to do
smp_send_reschedule(), which sends an IPI and is therefore more expensive
on most architectures.

Signed-off-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:31 -07:00
Lai Jiangshan
2b3fc35f69 rcu: optionally leave lockdep enabled after RCU lockdep splat
There is no need to disable lockdep after an RCU lockdep splat,
so remove the debug_lockdeps_off() from lockdep_rcu_dereference().
To avoid repeated lockdep splats, use a static variable in the inlined
rcu_dereference_check() and rcu_dereference_protected() macros so that
a given instance splats only once, but so that multiple instances can
be detected per boot.

This is controlled by a new config variable CONFIG_PROVE_RCU_REPEATEDLY,
which is disabled by default.  This provides the normal lockdep behavior
by default, but permits people who want to find multiple RCU-lockdep
splats per boot to easily do so.

Requested-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:31 -07:00
John Stultz
d7e81c269d clocksource: Add clocksource_register_hz/khz interface
How to pick good mult/shift pairs has always been difficult to
describe to folks writing clocksource drivers, since it requires
careful tradeoffs in adjustment accuracy vs overflow limits.

Now, with the clocks_calc_mult_shift function, its much
easier. However, not many clocksources have converted to using that
function, and there is still the issue of the max interval length
assumption being made by each clocksource driver independently.

So this patch simplifies the registration process by having
clocksources be registered with a hz/khz value and the registration
function taking care of setting mult/shift.

This should take most of the confusion out of writing a clocksource
driver.

Additionally it also keeps the shift size tradeoff (more accuracy vs
longer possible nohz times) centralized so the timekeeping core can
keep track of the assumptions being made.

[ tglx: Coding style and comments fixed ]

Signed-off-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <1273280858-30143-1-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-05-10 14:24:26 +02:00
Stanislaw Gruszka
29f87b793d posix-cpu-timers: Optimize run_posix_cpu_timers()
We can optimize and simplify things taking into account signal->cputimer
is always running when we have configured any process wide cpu timer.

In check_process_timers(), we don't have to check if new updated value of
signal->cputime_expires is smaller, since we maintain new first expiration
time ({prof,virt,sched}_expires) in code flow and all other writes to
expiration cache are protected by sighand->siglock .

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-05-10 14:24:26 +02:00
Thomas Gleixner
dbb6be6d5e Merge branch 'linus' into timers/core
Reason: Further posix_cpu_timer patches depend on mainline changes

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-05-10 14:20:42 +02:00
Ingo Molnar
7c224a03a7 Merge commit 'v2.6.34-rc7' into oprofile
Merge reason: Update to Linus's latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-10 13:12:29 +02:00
Li Zefan
af507ae8a0 sched: Remove a stale comment
This comment should have been removed together with uids_mutex
when removing user sched.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
LKML-Reference: <4BE77C6B.5010402@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-10 08:48:39 +02:00
Arjan van de Ven
0224cf4c5e sched: Intoduce get_cpu_iowait_time_us()
For the ondemand cpufreq governor, it is desired that the iowait
time is microaccounted in a similar way as idle time is.

This patch introduces the infrastructure to account and expose
this information via the get_cpu_iowait_time_us() function.

[akpm@linux-foundation.org: fix CONFIG_NO_HZ=n build]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: davej@redhat.com
LKML-Reference: <20100509082523.284feab6@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-09 19:35:27 +02:00
Arjan van de Ven
e0e37c200f sched: Eliminate the ts->idle_lastupdate field
Now that the only user of ts->idle_lastupdate is
update_ts_time_stats(), the entire field can be eliminated.

In update_ts_time_stats(), idle_lastupdate is first set to
"now", and a few lines later, the only user is an if() statement
that assigns a variable either to "now" or to
ts->idle_lastupdate, which has the value of "now" at that point.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: davej@redhat.com
LKML-Reference: <20100509082439.2fab0b4f@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-09 19:35:26 +02:00
Arjan van de Ven
8d63bf949e sched: Fold updating of the last_update_time_info into update_ts_time_stats()
This patch folds the updating of the last_update_time into the
update_ts_time_stats() function, and updates the callers.

This allows for further cleanups that are done in the next
patch.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: davej@redhat.com
LKML-Reference: <20100509082403.60072967@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-09 19:35:26 +02:00
Arjan van de Ven
8c7b09f43f sched: Update the idle statistics in get_cpu_idle_time_us()
Right now, get_cpu_idle_time_us() only reports the idle
statistics upto the point the CPU entered last idle; not what is
valid right now.

This patch adds an update of the idle statistics to
get_cpu_idle_time_us(), so that calling this function always
returns statistics that are accurate at the point of the call.

This includes resetting the start of the idle time for
accounting purposes to avoid double accounting.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: davej@redhat.com
LKML-Reference: <20100509082323.2d2f1945@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-09 19:35:26 +02:00
Arjan van de Ven
595aac488b sched: Introduce a function to update the idle statistics
Currently, two places update the idle statistics (and more to
come later in this series).

This patch creates a helper function for updating these
statistics.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: davej@redhat.com
LKML-Reference: <20100509082245.163e67ed@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-09 19:35:25 +02:00
Arjan van de Ven
b1f724c305 sched: Add a comment to get_cpu_idle_time_us()
The exported function get_cpu_idle_time_us() has no comment
describing it; add a kerneldoc comment

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: davej@redhat.com
LKML-Reference: <20100509082208.7cb721f0@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-09 19:35:25 +02:00
Frederic Weisbecker
9313543945 tracing: Drop the nested field from lock_release event
Drop the nested field as we don't use it. Every nested state can
be computed from a state machine on post processing already.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Steven Rostedt <rostedt@goodmis.org>
2010-05-09 13:45:34 +02:00
Frederic Weisbecker
883a2a3189 tracing: Drop lock_acquired waittime field
Drop the waittime field from the lock_acquired event, we can
calculate it by substracting the lock_acquired event timestamp
with the matching lock_acquire one.

It is not needed and takes useless space in the traces.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Steven Rostedt <rostedt@goodmis.org>
2010-05-09 13:45:32 +02:00
Ingo Molnar
e7858f52a5 Merge branch 'cpu_stop' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into sched/core 2010-05-08 18:11:19 +02:00
Masami Hiramatsu
c0614829c1 kprobes: Move enable/disable_kprobe() out from debugfs code
Move enable/disable_kprobe() API out from debugfs related code,
because these interfaces are not related to debugfs interface.

This fixes a compiler warning.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by:  Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20100427223312.2322.60512.stgit@localhost6.localdomain6>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-08 18:08:30 +02:00