Commit Graph

72 Commits

Author SHA1 Message Date
Haojian Zhuang
3073f0fa2b ARM: mmp: fix cpuid detection on mmp2
Fix typo error on cpu_is_mmp2(). Correct cpu_readid_id() to
read_cpuid_id().  Append missing parenthesis.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-03 23:11:16 +08:00
Nicolas Pitre
6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00
Jeremy Kerr
0ea1293009 arm: return both physical and virtual addresses from addruart
Rather than checking the MMU status in every instance of addruart, do it
once in kernel/debug.S, and change the existing addruart macros to
return both physical and virtual addresses. The main debug code can then
select the appropriate address to use.

This will also allow us to retreive the address of a uart for the MMU
state that we're not current in.

Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com>
and Tony Lindgren <tony@atomide.com>, and fix for versatile express from
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-20 00:27:33 -04:00
Haojian Zhuang
f090c74b23 ARM: mmp: update cpuid of pxa168 and pxa910
Correct the cpuid of pxa168 and pxa910.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:32 +08:00
Mark F. Brown
759305c62f ARM: pxa168/teton bga: add board support for i2c and rtc-ds1337
Defined I2C/ALARM pin definitions
DS1337 RTC alarm support is tied to RTC_INT_GPIO

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:28 +08:00
Mark F. Brown
d2ce697309 ARM: pxa168/teton bga: added keypad support
Support for Matrix keypad ESC, ENTER, LEFT, and RIGHT

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:27 +08:00
Mark F. Brown
1bbd7089f2 ARM: pxa168: added support for Teton BGA platform
Added board defintion, header, and debug UART support.

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:26 +08:00
Haojian Zhuang
0bd8696119 ARM: mmp: support sparse irq
Add sparse IRQ support in ARCH_MMP.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:25 +08:00
Mark F. Brown
6aafc5f394 ARM: pxa168/aspenite: add board support for keypad
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:21 +08:00
Mark F. Brown
ab5739a179 ARM: pxa168: added keypad wake clear event support for platform
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:20 +08:00
Mark F. Brown
2ce4389068 ARM: pxa168: added wake clear register support for APMU
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:18 +08:00
Mark F. Brown
6d109465fb ARM: pxa168: added keypad support
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:17 +08:00
Mark F. Brown
884646a572 ARM: pxa168/aspenite: added initial support for TPO TD043MTEA1 LCD
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08 16:21:18 +08:00
Mark F. Brown
58cf68b88c ARM: pxa168: added framebuffer support code
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08 16:21:17 +08:00
Mark F. Brown
32c4dad8f8 ARM: pxa168: fix corrected reset vector
Reset vector for pxa168 is 0xffff_0000 not 0x0. This fix allows
reboot to work

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-25 09:47:03 +08:00
Eric Miao
2728701d1c [ARM] mmp: move declarations into SoC specific header file from common.h
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:34:46 +08:00
Eric Miao
f7426f53d2 [ARM] mmp: avoid devices.h being included multiple times
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:34:45 +08:00
Eric Miao
4d4a339dd5 [ARM] mmp: move mmp2 specific timer code to mmp2.c
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:34:45 +08:00
Eric Miao
8022887cda [ARM] mmp: rename pxa_map_io() to mmp_map_io()
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:34:45 +08:00
Eric Miao
4b37cd335b [ARM] mmp: remove never supported .boot_params for MMP
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:34:45 +08:00
Haojian Zhuang
2503991a56 [ARM] mmp: append device support in jasper
Support regulator MAX8649, PMIC MAX8925 into the Jasper.
Backlight & power supply components of MAX8925 are enabled in Jasper.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:06 +02:00
Haojian Zhuang
fed2405580 [ARM] mmp: update twsi index
Sync twsi index to register index. It's used to avoid typo error.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:06 +02:00
Mingliang Hu
d49ea9e30b [ARM] mmp: add smc registers definition
Signed-off-by: Mingliang Hu <mhu4@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:06 +02:00
Haojian Zhuang
f455787083 [ARM] mmp: add dma support to mmp2
Add DMA support in MMP2.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:05 +02:00
Haojian Zhuang
7f39403c56 [ARM] mmp: update mfp setting
Update mfp setting for mmp2.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:05 +02:00
Mingliang Hu
8ae84427bb [ARM] mmp: fix clock tick rate in mmp2
In MMP2, clock tick rate should be 6500000.

Signed-off-by: Mingliang Hu <mhu4@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:05 +02:00
Haojian Zhuang
55d3936d30 [ARM] mmp: configure gpio pins from 128 to 192
In mmp2, 6 banks of GPIO registers are supported. So we can support 192
GPIO pins at most.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:05 +02:00
Haojian Zhuang
66b1964750 [ARM] mmp: enable L2 in mmp2
Enable Tauros2 L2 in mmp2. Tauros2 L2 is shared in Marvell ARM cores.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:04 +02:00
Haojian Zhuang
e598863690 [ARM] mmp: update clock register function
Use clk_add_table in order to sync with clock driver.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:04 +02:00
Haojian Zhuang
07871c195a [ARM] mmp: enable ssp in aspenite
Configure both ssp and wm8753 in aspenite.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:59 +02:00
Haojian Zhuang
7e4992288e [ARM] mmp: support ssp in pxa168
Support ssp devices in PXA168. PXA168 could reuse the code of PXA SSP.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:59 +02:00
Eric Miao
7471f46d74 [ARM] mmp: fix for variables in uncompress.h being discarded
Due to commit:

    5de813b  ARM: Eliminate decompressor -Dstatic= PIC hack

The data section will be discarded for the decompressor, thus move the
static variables into BSS section by initializing them at run time.

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:05 +08:00
Russell King
988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Eric Miao
2029e5643a [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
The irq_chip is not yet registered, so no default irq_chip.mask_ack(),
which we have to handle it correctly manually here.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:57 +08:00
Haojian Zhuang
df0c382436 [ARM] mmp2: add handling on PMIC IRQ
Since PMIC INT pin is a special pin of CPU, the status of PMIC INT pin needs
to be cleared after PMIC IRQ occured. Now append the clear operation in
irq chip handler.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:57 +08:00
Haojian Zhuang
ce0ac42359 [ARM] mmp2: add support for board IRQs
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:57 +08:00
Haojian Zhuang
0913b86ff7 [ARM] mmp2: add missing ICU register definitions
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:57 +08:00
Haojian Zhuang
16144bfb83 [ARM] mmp2: add gpio initialization
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:56 +08:00
Haojian Zhuang
247b4592f3 [ARM] mmp2: add mfpr setting
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:56 +08:00
Haojian Zhuang
4e3b4da98e [ARM] mmp2: add mask function in irq-mmp2.c
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:56 +08:00
Haojian Zhuang
e1cb7db2ef [ARM] mmp: support jasper development board
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:55 +08:00
Haojian Zhuang
2f7e8faef5 [ARM] mmp: add support for Marvell MMP2
Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's
ARMv6 compatible.  Support basic interrupt handler and timer,
and basic support for MMP2 based FLINT platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:55 +08:00
Eric Miao
978da5bcdb [ARM] mmp: rename irq.c to irq-pxa168.c to allow other SoC IRQ chips
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:54 +08:00
Haojian Zhuang
9896de72d2 [ARM] mmp: avengers lite (pxa168) board bring up
Signed-off-by: Gavin Gu <gavin.gu@marvell.com>
Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Jack Ren <jack.ren@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:53 +08:00
Russell King
9f33be2c3a Merge branches 'clks' and 'pnx' into devel 2010-02-25 22:10:38 +00:00
Russell King
2741ecb4ce Merge branch 'misc2' into devel 2010-02-25 22:09:41 +00:00
Fenkart/Bostandzhyan
c931b4f655 ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
Makes it consistent with VMALLOC_START

Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:40:33 +00:00
Russell King
0a0300dc8c ARM: Consolidate clks_register() and similar
Most machine classes want some way to register a block of clk_lookup
structures, and most do it by implementing a clks_register() type
function which walks an array, or by open-coding a loop.

Consolidate all this into clkdev_add_table().

Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:32:36 +00:00
Tony Lindgren
4e6d488af3 ARM: 5910/1: ARM: Add tmp register for addruart and loadsp
Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.

NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:

$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
	arch/arm/*/include/*/debug-macro.S

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:27:52 +00:00
Uwe Kleine-König
c57b934343 [ARM] pxa/ttc_dkb: remove duplicate macro definition
ARRAY_AND_SIZE is already defined arch/arm/mach-mmp/common.h which is
already included.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Bin Yang <bin.yang@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29 14:11:33 +08:00