Odroid HC1 board has built-in JMicron USB to SATA bridge, which supports
UAS protocol. Enable support for it to make sure that all built-in storage
devices are available. Enable it as module to keep in line with multi_v7
policy to enable drivers as build-in only if they are critical for boot
process. On Odroid HC1 the kernel itself has to be still read from the
SD-card, so assume that modules/initrd is also accessible there.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This updates the Gemini defconfig with drivers merged
for v4.13 or v4.14:
- ATA driver is merged
- DMA driver is merged
- RTC driver gets selected from default Kconfig
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
It is no longer possible to load this at runtime, so let's
change the few remaining users to have it built-in all
the time.
arch/arm/configs/zeus_defconfig:115:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE
arch/arm/configs/viper_defconfig:116:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE
arch/arm/configs/pxa_defconfig:474:warning: symbol value 'm' invalid for FRAMEBUFFER_CONSOLE
Reported-by: kernelci.org bot <bot@kernelci.org>
Fixes: 6104c37094 ("fbcon: Make fbcon a built-time depency for fbdev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable kernel mode NEON and the various NEON based crypto algorithms,
which are between 1.4x (AES-XTS) and 2.4x (AES-GCM) faster than
scalar code (measured on Cortex-A8).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Odroid HC1 board has built-in JMicron USB to SATA bridge, which supports
UAS protocol. Compile-in support for it (instead of enabling it as module)
to make sure that all built-in storage devices are available for rootfs.
The bridge itself also supports fallback to standard USB Mass Storage
protocol, but USB Mass Storage class doesn't bind to it when UAS is
compiled as module and modules are not (yet) available.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Odroid U3 (Exynos 4412 based) for instance needs this driver,
otherwise its USB hub will not come up.
Also selecting it as built-in to allow booting from USB without
an initrd/initramfs.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Note there is a misc driver drop in here given we have support
in IIO and the feeling is no one will care.
A large part of this series is a boiler plate removal series avoiding
the need to explicitly provide THIS_MODULE in various locations.
It's very dull but touches all drivers.
New device support
* ad5446
- add ids to support compatible parts DAC081S101, DAC101S101,
DAC121S101.
- add the dac7512 id and drop the misc driver as feeling is no
one is using it (was introduced for a board that is long obsolete)
* mt6577
- add bindings for mt2712 which is fully compatible with other
supported parts.
* st_pressure
- add support for LPS33HW and LPS35HW with bindings (ids mostly).
New features
* ccs811
- Add support for the data ready trigger.
* mma8452
- remove artifical restriction on supporting multiple event types
at the same time.
* tcs3472
- support out of threshold events
Core and tree wide cleanup
* Use macro magic to remove the need to provide THIS_MODULE as part of
struct iio_info or struct iio_trigger_ops. This is similar to
work done in a number of other subsystems (e.g. i2c, spi).
All drivers are fixed and then the fields in these structures are
removed.
This will cause build failures for out of tree drivers and any
new drivers that cross with this work going into the kernel.
Note mostly done with a coccinelle patch, included in the series
on the mailing list but not merged as the fields no longer exist
in the structures so the any hold outs will cause a build failure.
Cleanups
* ads1015
- avoid writing config register when it doesn't change.
- add 10% to conversion wait time as it seems it is sometimes
a little small.
* ade7753
- replace use of core mlock with a local lock. This is part of a
long term effort to make the use of mlock opaque and single
purpose.
* ade7759
- expand the use of buf_lock to cover previous mlock cases. This
is a slightly nicer solution to the same issue as in ade7753.
* cros_ec
- drop an unused variable
* inv_mpu6050
- add a missing break in a switch for consistency - not actual
bug,
- make some local arrays static to save on object code size.
* max5481
- drop manual setting of the spi module owner as handled by the
spi core.
* max5487
- drop manual setting of the spi module owner as handled by the
spi core.
* max9611
- drop explicit setting of the i2c module owner as handled by
the i2c core.
* mcp320x
- speed up reads on single channel devices,
- drop unused of_device_id data elements,
- document the struct mcp320x,
- improve binding docs to reflect restrictions on spi setup and
to make it explicit that the reference regulator is needed.
* mma8452
- symbolic to octal permissions,
- unsigned to unsigned int.
* st_lsm6dsx
- avoid setting odr values multiple times,
- drop config of LIR as it is only ever set to the existing
defaults,
- drop rounding configuration as it only ever matches the defaults.
* ti-ads8688
- drop manual setting of the spi module owner as handled by the
spi core.
* tsl2x7x
- constify the i2c_device_id,
- cleanup limit checks to avoid static checker warnings (and generally
have nicer code).
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlnH4XkRHGppYzIzQGtl
cm5lbC5vcmcACgkQVIU0mcT0Fogkaw//e3z+4TQT2Hn+550lBYUV8pBR5emDiSe3
0QTG+ZS7Kh+fPYENLCXtW9ttZicmUSqkTQFvlMTjAxHyj9XzL7+BXS9UlNgVLsqX
pn9KprPj31lrXpJOXMSgcdiqWMZLtCvprAJgnwfZt1GevS3WbCMmnnoaBuJV61jp
w0VD+forukTGF7b0OMGB0d5mwtYS0bJYqXRRMPD+2bNeM4hqt5YM3+wHSqP35t3l
MoaqKlbx7ZtKDF4zIa59nKNP7Ky7IByWogLZRlJ/vD/uKrACckPT22+KT8rX2TwA
NpZb1Oy/KZBTl5D9iRjZADq4NaRJENFXJiG6GkjoGjrQhUqHaCinHWpLioqLGlRq
qCPL2nRjqm4Qr7E8sxlwR1Ajlg0utBMY7Oflym/XJMMLF/ZE6HSrzyrxuVMG2EjV
T7SVIncbfg6kyr/r4kKsAT3BUMV+TdO4sXm+JgphZBUqZLp0nFHnmjP7Rm2j2uWq
+yLrSuF25RijrRj3sp28zg9dFWlRwRvZvcAx8kEGm1kMjMWr+Q10xTK9o/5LlFEw
57sUm6qgmigPK8sahDtcdLIwaCPVvAYvJ0e4Mfw5UsPSlZmHmM1mLwjpwiXBZ5ig
oxnJmTXsn5RcOGiW/mg0VCH26NkBx7H0fsRqQeq9wkxHLrm75vXroIn7YqRIg+Ad
/Itu6x6fOIg=
=ik5C
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Round one of new device support, features and cleanup for IIO in the 4.15 cycle.
Note there is a misc driver drop in here given we have support
in IIO and the feeling is no one will care.
A large part of this series is a boiler plate removal series avoiding
the need to explicitly provide THIS_MODULE in various locations.
It's very dull but touches all drivers.
New device support
* ad5446
- add ids to support compatible parts DAC081S101, DAC101S101,
DAC121S101.
- add the dac7512 id and drop the misc driver as feeling is no
one is using it (was introduced for a board that is long obsolete)
* mt6577
- add bindings for mt2712 which is fully compatible with other
supported parts.
* st_pressure
- add support for LPS33HW and LPS35HW with bindings (ids mostly).
New features
* ccs811
- Add support for the data ready trigger.
* mma8452
- remove artifical restriction on supporting multiple event types
at the same time.
* tcs3472
- support out of threshold events
Core and tree wide cleanup
* Use macro magic to remove the need to provide THIS_MODULE as part of
struct iio_info or struct iio_trigger_ops. This is similar to
work done in a number of other subsystems (e.g. i2c, spi).
All drivers are fixed and then the fields in these structures are
removed.
This will cause build failures for out of tree drivers and any
new drivers that cross with this work going into the kernel.
Note mostly done with a coccinelle patch, included in the series
on the mailing list but not merged as the fields no longer exist
in the structures so the any hold outs will cause a build failure.
Cleanups
* ads1015
- avoid writing config register when it doesn't change.
- add 10% to conversion wait time as it seems it is sometimes
a little small.
* ade7753
- replace use of core mlock with a local lock. This is part of a
long term effort to make the use of mlock opaque and single
purpose.
* ade7759
- expand the use of buf_lock to cover previous mlock cases. This
is a slightly nicer solution to the same issue as in ade7753.
* cros_ec
- drop an unused variable
* inv_mpu6050
- add a missing break in a switch for consistency - not actual
bug,
- make some local arrays static to save on object code size.
* max5481
- drop manual setting of the spi module owner as handled by the
spi core.
* max5487
- drop manual setting of the spi module owner as handled by the
spi core.
* max9611
- drop explicit setting of the i2c module owner as handled by
the i2c core.
* mcp320x
- speed up reads on single channel devices,
- drop unused of_device_id data elements,
- document the struct mcp320x,
- improve binding docs to reflect restrictions on spi setup and
to make it explicit that the reference regulator is needed.
* mma8452
- symbolic to octal permissions,
- unsigned to unsigned int.
* st_lsm6dsx
- avoid setting odr values multiple times,
- drop config of LIR as it is only ever set to the existing
defaults,
- drop rounding configuration as it only ever matches the defaults.
* ti-ads8688
- drop manual setting of the spi module owner as handled by the
spi core.
* tsl2x7x
- constify the i2c_device_id,
- cleanup limit checks to avoid static checker warnings (and generally
have nicer code).
In order to get ADV7180 analog video decoder to probe on a Gateworks
GW51xx we need select CONFIG_MUX_MMIO, otherwise /dev/media node does
not get created.
Select CONFIG_MUX_MMIO, so that the ADV7180 driver can be correctly
probed.
Reported-by: Tim Harvey <tharvey@gateworks.com>
Suggested-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the CMA and DMA_CMA Kconfig options by default for
Davinci platforms. Davinci remoteproc driver is one of the
modules that depends on these options, and this allows the
driver to be made visible for selection with menuconfig.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
There is some disagreement between the partition table map in Linux
for the DA850-EVM and the corresponding partition map in U-Boot.
To prevent breaking the Kernel, this patch enables MTD_CMDLINE_PARTS
which will allow the U-Boot to pass the partition map so future partitions
match without breaking backwards compatibility.
While at it, also sync to savedefconfig which leads to removal of
CONFIG_MMC_BLOCK_BOUNCE.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
multi_v7_defconfig multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Texas Instruments DAC7512 has the exact same pinout, programming
interface and power-down modes as the Texas Instruments DAC121S101 and
Analog Devices AD5320, which are already supported by the IIO driver
ad5446.c. Remove the duplicate misc driver.
This requires user space to migrate to the standardized IIO sysfs ABI.
(In other words, it needs to change a filename.)
The IIO driver supports the chip's features more fully, e.g. the ability
to power down the output or choose one of the available powerdown modes.
There is an oddity with the misc driver in that it initializes the SPI
slave to SPI_MODE_0, in contradiction to the datasheet which specifies
that data is latched in on the falling edge, implying that SPI_MODE_1
or SPI_MODE_2 must be used. Another oddity is that Kconfig and the
MODULE_DESCRIPTION() claim the chip has 16-bit resolution although it
actually has 12-bit.
Datasheets:
http://www.ti.com/lit/ds/symlink/dac7512.pdfhttp://www.ti.com/lit/ds/symlink/dac121s101.pdfhttp://www.analog.com/media/en/technical-documentation/data-sheets/AD5320.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Daniel Mack <daniel@zonque.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This branch contains platform updates for 32- and 64-bit ARM,
including defconfig updates to enable new options, drivers and
platforms. There are also a few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g8cF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
contains platform updates for 32- and 64-bit ARM, including defconfig
updates to enable new options, drivers and platforms. There are also a
few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other
drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
DMA code"
* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: multi_v7_defconfig: make eSDHC driver built-in
arm64: defconfig: enable rockchip graphics
MAINTAINERS: Update Cavium ThunderX2 entry
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
ARM: davinci_all_defconfig: enable tinydrm and ST7586
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
MAINTAINERS: update ARM/ZTE entry
soc: versatile: remove unnecessary static in realview_soc_probe()
ARM: Convert to using %pOF instead of full_name
ARM: hisi: Fix typo in comment
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add recently added crypto drivers as modules
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
...
-----BEGIN PGP SIGNATURE-----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=fNM2
-----END PGP SIGNATURE-----
Merge tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"Brazil's Independence Day pull request :-)
This is one of the biggest media pull requests, with 625 patches
affecting almost all parts of media (RC, DVB, V4L2, CEC, docs).
This contains:
- A lot of new drivers:
* DVB frontends: mxl5xx, stv0910, stv6111;
* camera flash: as3645a led driver;
* HDMI receiver: adv748X;
* camera sensor: Omnivision 6650 5M driver (ov6650);
* HDMI CEC: ao-cec meson driver;
* V4L2: Qualcom camss driver;
* Remote controller: gpio-ir-tx, pwm-ir-tx and zx-irdec drivers.
- The DDbridge DVB driver got a massive update, with makes it in sync
with modern hardware from that vendor;
- There's an important milestone on this series: the DVB
documentation was written in 2003, but only started to be updated
in 2007. It also used to contain several gaps from the time it was
kept out of tree, mentioning error codes and device nodes that
never existed upstream. On this series, it received a massive
update: all non-deprecated digital TV APIs are now in sync with the
current implementation;
- Some DVB APIs that aren't used by any upstream driver got removed;
- Other parts of the media documentation algo got updated, fixing
some bugs on its PDF output and making it compatible with Sphinx
version 1.6.
As the number of hacks required to build PDF output reduced, I hope
we'll have less troubles as newer versions of our documentation
toolchain are released (famous last words);
- As usual, lots of driver cleanups and improvements"
* tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (624 commits)
media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependency
media: get rid of removed DMX_GET_CAPS and DMX_SET_SOURCE leftovers
media: Revert "[media] v4l: async: make v4l2 coexist with devicetree nodes in a dt overlay"
media: staging: atomisp: sh_css_calloc shall return a pointer to the allocated space
media: Revert "[media] lirc_dev: remove superfluous get/put_device() calls"
media: add qcom_camss.rst to v4l-drivers rst file
media: dvb headers: make checkpatch happier
media: dvb uapi: move frontend legacy API to another part of the book
media: pixfmt-srggb12p.rst: better format the table for PDF output
media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation
media: index.rst: don't write "Contents:" on PDF output
media: pixfmt*.rst: replace a two dots by a comma
media: vidioc-g-fmt.rst: adjust table format
media: vivid.rst: add a blank line to correct ReST format
media: v4l2 uapi book: get rid of driver programming's chapter
media: format.rst: use the right markup for important notes
media: docs-rst: cardlists: change their format to flat-tables
media: em28xx-cardlist.rst: update to reflect last changes
media: v4l2-event.rst: adjust table to fit on PDF output
media: docs: don't show ToC for each part on PDF output
...
Sometimes root file system is deployed on SD card. It's
proper to build eSDHC driver into kernel.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable new Aspeed drivers for i2c, lpc snoop and vuart
- Set VMSPLIT_2G for ast2400 platforms, required for mtd driver
-----BEGIN PGP SIGNATURE-----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=brUg
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.14-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig
Pull "Aspeed defconfig updates for 4.14" from Joel Stanley:
- Enable new Aspeed drivers for i2c, lpc snoop and vuart
- Set VMSPLIT_2G for ast2400 platforms, required for mtd driver
* tag 'aspeed-4.14-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
These drivers have been recently upstreamed, so add them to the
defconfigs.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is required for the SMC controller mapping windows on the AHB
Bus.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This enables the tinydrm and ST7586 panel modules used by the display
on LEGO MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
There is no dependency between the two, so remove the dependency in
Kconfig files.
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Enables the ChipIdea UDC driver and selects some symbols that were
previously being selected by other drivers but will no longer be in
v4.14.
-----BEGIN PGP SIGNATURE-----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=mYch
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
Pull "ARM: tegra: Default configuration updates for v4.14-rc1" from Thierry Reding:
Enables the ChipIdea UDC driver and selects some symbols that were
previously being selected by other drivers but will no longer be in
v4.14.
* tag 'tegra-for-4.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
- Enable SPI_GPIO and GPIO_74X164 support which are useful for some
boards like imx7d-sabresd.
- Enable build of CODA video codec and staging video4linux drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZloiPAAoJEFBXWFqHsHzOK9AH/2m3J8waqDJW1ln6emcBCB7X
2LSHk+66UGN+V4rchXHtrdfjjrpszaRtregW29qCYqwATA+ZEmtCey6MR/8krzBk
exjYOfZTDXvAqnVnbr5JT+/PWVzDKCLHLSVEMXZ3V2ylM0ps4Pdb1G19RxWg58HO
tE69x1lIyHEphpaZ/xvVuD7k8BrTBYdgVn41qwlzZwZsiHIXLSih3wirxX911C11
V3yWoFAG9NZ1qjIJEYn1m/wtpWtyUu8IRDiZlHyodlR+ffeE43Hgh2+Ih/lqyKrm
SH4U0fN0D7Tta08/2MvPeHsGCnppk4kWs0tZDafUd8qOb+MPi3NzNDI2Y7QRktM=
=ljhX
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Pull "i.MX defconfig updates for 4.14" from Shawn Guo:
- Enable SPI_GPIO and GPIO_74X164 support which are useful for some
boards like imx7d-sabresd.
- Enable build of CODA video codec and staging video4linux drivers.
* tag 'imx-defconfig-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers
ARM: imx_v6_v7_defconfig: Select the coda driver as module
ARM: imx_v6_v7_defconfig: Enable GPIO_74X164
ARM: imx_v6_v7_defconfig: Enable SPI_GPIO
for 4.14, please pull the following:
- Markus enables the Broadcom STB AVS thermal monitoring driver as a module
which is currently queued in Rui Zhang's tree
- Stefan updates the bcm2835_defconfig to contain a few useful changes: the RPI
mini UART is enabled by default, the default CMA pool is bumped up to 32MB to
support VC4 usages and finally BRCMFMAC is enabled as module since this is the
wireless driver used on Raspberry Pi Zero Wireless.
-----BEGIN PGP SIGNATURE-----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=+2/I
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.14/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Pull "Broadcom defconfig changes for 4.14" from Florian Fainelli:
This pull request contains defconfig file changes for Broadcom ARM-based SoCs
for 4.14, please pull the following:
- Markus enables the Broadcom STB AVS thermal monitoring driver as a module
which is currently queued in Rui Zhang's tree
- Stefan updates the bcm2835_defconfig to contain a few useful changes: the RPI
mini UART is enabled by default, the default CMA pool is bumped up to 32MB to
support VC4 usages and finally BRCMFMAC is enabled as module since this is the
wireless driver used on Raspberry Pi Zero Wireless.
* tag 'arm-soc/for-4.14/defconfig' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
ARM: bcm2835_defconfig: Enable wifi driver for RPi Zero W
ARM: bcm2835_defconfig: Increase CMA for VC4
ARM: bcm2835_defconfig: Enable Mini UART console support
* Enable BQ32000 rtc in shmobile_defconfig
Biju Das says "The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To
increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nQRM
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Pull "Second Round of Renesas ARM Based SoC Defconfig Updates for v4.14"
from Simon Horman:
* Enable BQ32000 rtc in shmobile_defconfig
Biju Das says "The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To
increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration."
* tag 'renesas-defconfig2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig
Since NVIDIA Tegra is supported now by the ChipIdea USB driver, let's
enable this driver in tegra_defconfig.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This selects both the Tegra20 and Tegra30 I2S interfaces (that were
previously auto-selected by Kconfig but are not anymore) to
multi_v7_defconfig, as modules.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This selects both the Tegra20 and Tegra30 I2S interfaces (that were
previously auto-selected by Kconfig but are not anymore) to
tegra_defconfig, as built-ins.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Regenerate the default configuration on top of v4.13-rc1. This shuffles
around a couple of symbols and drops some that have become defaults or
which were dropped.
Signed-off-by: Thierry Reding <treding@nvidia.com>
phy driver on dra72x and dra71x evm, and LP87565 that is
on dra76-evm.
-----BEGIN PGP SIGNATURE-----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=2tUZ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Pull "defconfig changes for omaps for v4.14" from Tony Lindgren:
Defconfig updates for omaps for v4.14 to enable DP83867
phy driver on dra72x and dra71x evm, and LP87565 that is
on dra76-evm.
* tag 'omap-for-v4.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable LP87565
ARM: omap2plus_defconfig: enable DP83867 phy driver
Sunxi_defconfig is refreshed and various power supply and ADC drivers
of the AXP PMICs have been enabled.
-----BEGIN PGP SIGNATURE-----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=nZWf
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig
Pull "Allwinner defconfig changes for 4.14" from Chen-Yu Tsai:
Sunxi_defconfig is refreshed and various power supply and ADC drivers
of the AXP PMICs have been enabled.
* tag 'sunxi-defconfig-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: sunxi: Add AXP20X_ADC
arm: sunxi: Add additional power supplies
arm: sunxi: refresh the defconfig
* Enable DMA for Renesas serial ports
Geert Uytterhoeven says, "DMA for (H)SCIF(A|B) serial ports on Renesas
R-Car Gen2 and RZ/G1 SoCs is considered stable, hence enable it by
default.".
* Enable Ethernet AVB
For the iWave RZ/G1M Q7 SOM
* Replace DRM_RCAR_HDMI by generic bridge options
* Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
* Replace USB_XHCI_RCAR by USB_XHCI_PLATFORM
* Enable missing PCIE_RCAR dependency
Defconfig updates for various Kconfig updates covering
renamed Kconfig symbols, now missing dependancies and so on.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qKJg
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Pull "Renesas ARM Based SoC Defconfig Updates for v4.14" from Simon Horman:
* Enable DMA for Renesas serial ports
Geert Uytterhoeven says, "DMA for (H)SCIF(A|B) serial ports on Renesas
R-Car Gen2 and RZ/G1 SoCs is considered stable, hence enable it by
default.".
* Enable Ethernet AVB
For the iWave RZ/G1M Q7 SOM
* Replace DRM_RCAR_HDMI by generic bridge options
* Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
* Replace USB_XHCI_RCAR by USB_XHCI_PLATFORM
* Enable missing PCIE_RCAR dependency
Defconfig updates for various Kconfig updates covering
renamed Kconfig symbols, now missing dependancies and so on.
* tag 'renesas-defconfig-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable DMA for Renesas serial ports
ARM: multi_v7_defconfig: Replace DRM_RCAR_HDMI by generic bridge options
ARM: multi_v7_defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
ARM: shmobile: defconfig: Refresh
ARM: shmobile: defconfig: Enable DMA for serial ports
ARM: shmobile: defconfig: Replace DRM_RCAR_HDMI by generic bridge options
ARM: shmobile: defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD
ARM: shmobile: defconfig: Replace USB_XHCI_RCAR by USB_XHCI_PLATFORM
ARM: shmobile: defconfig: Enable missing PCIE_RCAR dependency
ARM: shmobile: defconfig: Enable Ethernet AVB
Cleanup ARMv7 defconfigs from options not existing anymore.
-----BEGIN PGP SIGNATURE-----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=pK83
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-arm-cleanups-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Pull "Bunch of ARM defconfig cleanups for v4.14" from Krzysztof Kozłowski:
Cleanup ARMv7 defconfigs from options not existing anymore.
* tag 'samsung-defconfig-arm-cleanups-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: qcom_defconfig: Cleanup from non-existing options
ARM: ezx_defconfig: Cleanup from non-existing options
ARM: vexpress_defconfig: Cleanup from non-existing options
ARM: ixp4xx_defconfig: Cleanup from non-existing options
ARM: multi_v7_defconfig: Cleanup from non-existing options
dra76-evm has LP87565. Enable it in omap2plus_defconfig.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the rockchip PHY driver for multi_v7_defconfig builds.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TI's DP83867 phy is used on DRA72x EVM rev C and DRA71x
EVMs. Enable support for it in omap2plus_defconfig.
The driver is built into the kernel to help NFS booting.
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable C_CAN/D_CAN driver supported by 66AK2G
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
shmobile_defconfig multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable the TI OMAP HSMMC and fixed regulator support
for keystone platforms.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
DMA for (H)SCIF(A|B) serial ports on Renesas R-Car Gen2 and RZ/G1 SoCs
is considered stable, hence enable it by default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The manual bridge implementation was removed in favor of the generic
one, so now we need to enable standard bridge drivers like
DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511.
Both were already enabled, but the (newer) ADV7511 audio part wasn't.
Fixes: 5c602531fe ("drm: rcar-du: Replace manual bridge implementation with DRM bridge")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
- Several options were moved,
- INPUT_MOUSEDEV_PSAUX is no longer enabled by default since commit
73d8ef7600 ("Input: mousedev - stop offering PS/2 to userspace
by default").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
DMA for (H)SCIF(A|B) serial ports on R-Car Gen2 and RZ/G1 SoCs is
considered stable, hence enable it by default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The manual bridge implementation was removed in favor of the generic
one, so now we need to enable standard bridge drivers like
DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511.
DRM_I2C_ADV7511 was already enabled, but the (newer) audio part wasn't.
Fixes: 5c602531fe ("drm: rcar-du: Replace manual bridge implementation with DRM bridge")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
USB_XHCI_RCAR is no longer enabled, as it now has a dependency on
USB_XHCI_PLATFORM, instead of selecting USB_XHCI_PLATFORM.
As the latter selects the former if ARCH_RENESAS, fix this by replacing
USB_XHCI_RCAR by USB_XHCI_PLATFORM in shmobile_defconfig.
Fixes: f879fc32aa ("usb: host: xhci-rcar: Avoid long wait in xhci_reset()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
PCIE_RCAR is no longer enabled, as it now has a dependency on
PCI_MSI_IRQ_DOMAIN instead of selecting PCI_MSI and PCI_MSI_IRQ_DOMAIN.
Fix this by explicitly enabling PCIE_RCAR in shmobile_defconfig.
Fixes: 3ee803641e ("PCI/MSI: irqchip: Fix PCI_MSI dependencies")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The iWave RZ/G1M Q7 SOM supports Gigabit Ethernet Phy (Micrel KSZ9031MNX).
Gigabit Ethernet support is available in Renesas AVB driver.
To increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable i.MX v4l2 media staging driver. For video capture on i.MX, the
video multiplexer subdev is required. On the SabreAuto, the ADV7180
video decoder is required along with i2c-mux-gpio. The Sabrelite
and SabreSD require the OV5640 and the SabreLite requires PWM clocks
for the OV5640.
Increase max zoneorder to allow larger video buffer allocations.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
AXP20X_POWER depends on IIO. Even though it does not depend on AXP20X_ADC,
it is the new, preferred way of getting power supply configuration, it's
going to be enabled anyway.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
A bunch of new power supplies have been added recently to handle the
batteries and the AC-IN plugs. Add them to our defconfig.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Update the defconfig with the current state of defaults.
This was done using make sunxi_defconfig; make savedefconfig
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the TI SYSCON and TI-SCI reset drivers for Keystone
platforms. These drivers will provide the reset functionality
for devices like DSPs or PRU-ICSSs. There are no devices that
require these to be built-in, so these are enabled as modules.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Enable the TI-SCI core protocol and the corresponding genpd
driver to enable the essential infrastructure for various
device drivers on the 66AK2G family of SoCs. The TI-SCI Clock
driver is automatically enabled for ARCH_KEYSTONE.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Message Manager is a communication hardware block on 66AK2G[1] SoCs.
Enable the same to provide support for communication with 66AK2G Power
Management Micro Controller (PMMC) via the TISCI protocol[2].
[1] http://www.ti.com/product/66ak2g02
[2] http://processors.wiki.ti.com/index.php/TISCI
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
This enables the wifi driver for Raspberry Pi Zero W. We need
to build this as a module otherwise the drivers tries to load the
firmware before the root partition is mounted.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
The VC4 needs more memory than the default setting:
cma: cma_alloc: alloc failed, req-size: 4096 pages, ret: -12
vc4-drm soc:gpu: failed to allocate buffer with size 16777216
So increase the value to 32 MB and fix this issue.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Since pl011 is connected to the BT chip, we need to enable the Mini
UART for serial console.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
exynos_defconfig, beside serving as a reference config for Exynos-based
devices, is used by developers during regular development work.
Enabling options responsible for locking tests allows to discover bugs
in drivers and mach code earlier.
This enables:
1. Detection of sleeping in atomic sections (DEBUG_ATOMIC_SLEEP),
2. Full lockdep (DEBUG_LOCK_ALLOC and PROVE_LOCKING which makes other
lock debug entries unneeded),
3. Detection of soft, kernel lockups (SOFTLOCKUP_DETECTOR).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Enable useful, but not essential components:
- NLS_UTF8, it might be used for accessing Microsoft-FS based storages,
- popular crypto algorithms and transformations as modules.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Enable useful, but not essential, stacks and drivers as modules:
- Bluetooth,
- mac80211,
- NFC,
- some USB network adapters,
- USB storage,
- additional USB devices (printers etc).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
CPU_FREQ_DEBUG is gone since commit 2d06d8c49a ("[CPUFREQ] use
dynamic debug instead of custom infrastructure").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Remove options which do not exist anymore:
- ECONET is gone since commit 349f29d841 ("econet: remove ancient bug
ridden protocol");
- IPDDP_DECAP is gone since commit 9b5645b513 ("appletalk: remove
"config IPDDP_DECAP"");
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The coda driver may be probed prior to the rootfs being available, leading
to firmware loading failure.
To avoid such problem, select the coda driver as module.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx7d-sabresd board uses a 74LV595PW SPI expander to drive several
peripherals, such as Ethernet reset, PCI reset, LCD power, etc.
Enabled this option by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some boards like imx7d-sdb provide SPIO functionality via GPIOs,
so enable the CONFIG_SPI_GPIO option.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Core:
- The documentation is moved over to RST.
- We now have agreed bindings for enabling input and output
buffers without actually enabling input and/or output on a
pin. We are chiseling out some details of pin control
electronics.
New drivers:
- ZTE ZX
- Renesas RZA1
- MIPS Ingenic JZ47xx: also switch over existing drivers in the
tree to use this pin controller and consolidate earlier
spread out code.
- Microschip MCP23S08: this driver is migrated from the GPIO
subsystem and totally rewritten to use proper pin control.
All users are switched over.
New subdrivers:
- Renesas R8A7743 and R8A7745.
- Allwinner Sunxi A83T R_PIO.
- Marvell MVEBU Armada CP110 and AP806.
- Intel Cannon Lake PCH.
- Qualcomm IPQ8074.
Notable improvements:
- IRQ support on the Marvell MVEBU Armada 37xx.
- Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
- Rockchip driver now supports iomux-route switching for
RK3228, RK3328 and RK3399.
- Rockchip A10 and A20 are merged into a single driver.
- STM32 has improved GPIO support.
- Samsung Exynos drivers are split per ARMv7 and ARMv8.
- Marvell MVEBU is converted to use regmap for register
access.
Maintenance:
- Several Renesas SH-PFC refactorings and updates.
- Serious code size cut for Mediatek MT7623.
- Misc janitorial and MAINTAINERS fixes.
-----BEGIN PGP SIGNATURE-----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=dUFL
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the big bulk of pin control changes for the v4.13 series:
Core:
- The documentation is moved over to RST.
- We now have agreed bindings for enabling input and output buffers
without actually enabling input and/or output on a pin. We are
chiseling out some details of pin control electronics.
New drivers:
- ZTE ZX
- Renesas RZA1
- MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
to use this pin controller and consolidate earlier spread out code.
- Microschip MCP23S08: this driver is migrated from the GPIO
subsystem and totally rewritten to use proper pin control. All
users are switched over.
New subdrivers:
- Renesas R8A7743 and R8A7745.
- Allwinner Sunxi A83T R_PIO.
- Marvell MVEBU Armada CP110 and AP806.
- Intel Cannon Lake PCH.
- Qualcomm IPQ8074.
Notable improvements:
- IRQ support on the Marvell MVEBU Armada 37xx.
- Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
- Rockchip driver now supports iomux-route switching for RK3228,
RK3328 and RK3399.
- Rockchip A10 and A20 are merged into a single driver.
- STM32 has improved GPIO support.
- Samsung Exynos drivers are split per ARMv7 and ARMv8.
- Marvell MVEBU is converted to use regmap for register access.
Maintenance:
- Several Renesas SH-PFC refactorings and updates.
- Serious code size cut for Mediatek MT7623.
- Misc janitorial and MAINTAINERS fixes"
* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
pinctrl: samsung: Remove bogus irq_[un]mask from resource management
pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
pinctrl: rza1: Remove unneeded wrong check for wrong variable
pinctrl: qcom: Add ipq8074 pinctrl driver
pinctrl: freescale: imx7d: make of_device_ids const.
pinctrl: DT: extend the pinmux property to support integers array
pinctrl: generic: Add output-enable property
pinctrl: armada-37xx: Fix number of pin in sdio_sb
pinctrl: armada-37xx: Fix uart2 group selection register mask
pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
pinctrl: sh-pfc: r8a7795: Add PWM support
MAINTAINERS: Add Qualcomm pinctrl drivers section
arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
dt-bindings: pinctrl: Add RZ/A1 bindings doc
pinctrl: Renesas RZ/A1 pin and gpio controller
pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
pinctrl.txt: move it to the driver-api book
pinctrl: ingenic: checking for NULL instead of IS_ERR()
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
...
A wide variety of TI platforms support NAND via the
CONFIG_MTD_NAND_OMAP2 driver (and related BCH options), so enable this.
In addition, multi_v7_defconfig supports the dm8168-evm and that
supports root being on a SATA drive, so build the DM816 AHCI driver into
the resulting kernel as well.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Enable RPMSG_QCOM_SMD to get boards working again
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wPTI
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Pull "Qualcomm ARM Based defconfig Updates for v4.13 - Part 2" from Andy Gross:
* Enable RPMSG_QCOM_SMD to get boards working again
* tag 'qcom-defconfig-for-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: enable RPMSG_QCOM_SMD
As of commit 5052de8def, QCOM_SMD_RPM and various other config
options enabled in the qcom_defconfig depends on the RPMSG. If
QCOM_SMD_RPM config option is not selected it disables the
REGULATOR_QCOM_SMD_RPM and other essential config options.
Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
1. Remove old Kconfig options from all ARM configs,
2. Update Samsung defconfigs to bring back options over time got disabled
for some reason (configs were not updated along with the code),
3. Save defconfigs for Samsung.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZR/SzAAoJEME3ZuaGi4PXmp4P/i5E+C35b/nE5pX4JC00Pwq3
K5G1yW/jo3K2koaf9wWXFt8Pq5dEnonYyfUUep9hZUBrZ9V+OHTamsdUczmiNnRT
OsPa64yvr3x8vJ+EbajXeHIgtc2Mpd/bvPtcaGW1+/TT8ZPrK4WQOAYUkCGOr2L3
M6gwu0C9ysvNUxVv4oIMFxRErptKqdKvbXf/OOwe65chP0Zfcu4oOyDHzauaEoOe
gn9Zk9UFOQNEQ+ZELccyr8v5TFwl7S/rHS1mokoh1dT5GrN2sy4Q9KxehTnIFgqD
Nc+8s/U4uRExINeP0WIW4+P/JOZXf7N2ZU+CYlxYgCYmd01LKfrQDff6cpgmHbdy
d1PDgB/8At0E733maSWYG/vPIcrdL2qFzGlFlu8SOdmjeoR8BFQf7JOnyL1RtESW
ZaSjdEaAcD+ttIZO8G3pugrdsqU82q/8U3CaQ0HC9+zev74C5Th8H2sDShOjUMAu
6cccRi1lJZKN9/O+6Vxa/n/tGykR7vQAr1MIlvNxH8FuuPiYCsDk6VD2EqaOSrnC
P3Wy/5BlnNLWfSDwYRSpiWB+4HZLvnrv+IUz3sicq7rZz1iLRftEynIrpwquNSoU
c49FvGKhUF0DQdOVTvOZdrCzJ7m0CjRvbdFJElGmKYgikN+Vf1DfXSy1fU7BNXdF
gdA4C91A69dLykre+E+k
=uKGf
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Pull "ARM defconfig cleanup" from Krzysztof Kozłowski:
1. Remove old Kconfig options from all ARM configs,
2. Update Samsung defconfigs to bring back options over time got disabled
for some reason (configs were not updated along with the code),
3. Save defconfigs for Samsung.
* tag 'samsung-defconfig-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: tct_hammer_defconfig: Save defconfig
ARM: s5pv210_defconfig: Save defconfig
ARM: s3c6400_defconfig: Save defconfig
ARM: mini2440_defconfig: Save defconfig
ARM: s3c2410_defconfig: Save defconfig
ARM: exynos_defconfig: Save defconfig
ARM: s5pv210_defconfig: Bring back lost (but wanted) options
ARM: s3c6400_defconfig: Bring back lost (but wanted) options
ARM: s3c2410_defconfig: Bring back lost (but wanted) options
ARM: tct_hammer_defconfig: Bring back lost (but wanted) options
ARM: mini2440_defconfig: Bring back lost (but wanted) options
ARM: defconfig: samsung: Re-order entries to match savedefconfig
ARM: defconfig: Cleanup from old Kconfig options
- Enable i.MX7 ADC driver support.
- Enable THERMAL_WRITABLE_TRIPS, so that i.MX thermal driver can set
trip points for testing.
- CONFIG_DEBUG_FS gets lost by accident because of a change around
CONFIG_RCU_TRACE. Re-enable it explicitly.
- Enable MXS LRADC driver and CONFIG_CGROUPS for mxs_defconfig.
- Enable more common cpufreq governors to help test cpufreq driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZRp9UAAoJEFBXWFqHsHzO/uQH/0LtqlmXKraEcYZS7EL+QNQZ
y2gm+/01IYP6Kw9e0jA5gGkTbfGUKRUDV9EtxSfRABrHsxtfB5wejsX6nKQ9AhCZ
taxSgzXG06TtMM1RxoYanKzGuEiNVfUovFYWUP5lEVdz36IDvmafiKJ+/l3J6hU5
YEFxcKqIrDK1370IjPHowoZsg8v5Bx8wyyavWOKpG/jbID7pWTunlIsGKCwF6aUl
xhf/VDiQpKzt27BixieXQsiPlisoXxKy0QZPzooDLwVzRVWB8xOcHa8GBbv7RcfA
HBtMKt+GM6RJByluAWfbv1ERNH3D2tg0gZEEoLAWK4t7VeS5qk1FeAhyj+4Y1EQ=
=jc6x
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
The i.MX defconfig updates for 4.13:
- Enable i.MX7 ADC driver support.
- Enable THERMAL_WRITABLE_TRIPS, so that i.MX thermal driver can set
trip points for testing.
- CONFIG_DEBUG_FS gets lost by accident because of a change around
CONFIG_RCU_TRACE. Re-enable it explicitly.
- Enable MXS LRADC driver and CONFIG_CGROUPS for mxs_defconfig.
- Enable more common cpufreq governors to help test cpufreq driver.
* tag 'imx-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC
ARM: imx_v6_v7_defconfig: Set THERMAL_WRITABLE_TRIPS=y for testing
ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
ARM: mxs_defconfig: Re-enable MXS LRADC
ARM: mxs_defconfig: Enable CONFIG_CGROUPS
ARM: imx_v6_v7_defconfig: Enable cpufreq governors
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the SENSORS_PWM_FAN in mvebu_v7_defconfig support by gpio
driver since the previous release
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWUTMRCMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71RDfAJ0RBMTsdw/g
e/aR1Jdf5BboEJ876gCeIGEATN8sYCxSKHLC7x0hVZnC1p4=
=ZuTF
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.13-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu defconfig for 4.13
Enable the SENSORS_PWM_FAN in mvebu_v7_defconfig support by gpio
driver since the previous release
* tag 'mvebu-defconfig-4.13-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
- Switch sama5 to be tickless in idle and enable hrtimer
- Add MCAN
-----BEGIN PGP SIGNATURE-----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=n/us
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.13-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig
defconfig for 4.13:
- Switch sama5 to be tickless in idle and enable hrtimer
- Add MCAN
* tag 'at91-ab-4.13-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: configs: at91: add MCAN driver to sama5_defconfig
ARM: configs: at91: enable HIGH_RES_TIMERS
ARM: configs: at91: make system tickless when idle
Signed-off-by: Olof Johansson <olof@lixom.net>
please pull the following:
- Stefan updates the bcm2835_defconfig to include serial, Ethernet and USB
gadget support which is needed for the Raspberry Pi Zero OTG changes
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZQELuAAoJEIfQlpxEBwcEEW8QANbI7WER6VDeurH4kPXFOwOg
qHyPHgFF/bvtz8lqlTXSGBVoRLjKeAT8YD2zNJiznJQyuiWntP+o6ODzYQshZwHI
LruN60SsVgAUaZ991UXHiflfW0Ffubfxd+fAL3NjCUSgKOTj720cLu454KNJhiSH
A1v0J8JDf46+ZS4cPzco8PdwahDozWjyiWxvgIm+CUCqJGm4p2SVdrwrXRVKUPLl
pA4tFdc7pfy1OiHJSK/EL3PxL+xLROPtyRMLT5T0ecIzWVa8+SRA9URMAOuFxnPX
8n1uTdw3ySh9KusUxJjTvzjkRgTJY999Ba5KB9uedngjKwJdzx3KCCasPyIm4wqa
ihYMhh1CaDp02Ky2iH/uVh0GmkA2gABT00kGRxzCXlzn8CffYGfyE9dfY+ljh26v
Lgu+Fw9yrQOr51J2ONkVCshql1e1uBm+MKc7kIBy6Br2BJfr2z5h1+rAbZiW5RT7
Nb96rXj7rNdKO6rWH5++BJGQMwOcYEuOZ2cogBv1eyjPcN+4z8pCHbTaWfsFqS8R
+5pZHchX8o/LTGWGAJfHteXSTZZdfI4iAF0LCUcn+IAS8VgVw0q+zH7hXsjZh4ih
B301blw/7XjeyaF12dmEu2KTgVKz2DOC5MBasrN2RfKrV+ddd9gBGwAfT0T64qKF
QzR0M4dZVg/4OGum5By2
=7EnZ
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.13/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig updates for 4.13,
please pull the following:
- Stefan updates the bcm2835_defconfig to include serial, Ethernet and USB
gadget support which is needed for the Raspberry Pi Zero OTG changes
* tag 'arm-soc/for-4.13/defconfig' of http://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable serial & ethernet USB gadget support
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Enable Exynos PRNG along with user-space crypto API.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZOs5tAAoJEME3ZuaGi4PXQPwP/0rPynH3Uic/FZPWJrZNlmvE
7ZsQpJWR5WQfdlVmlGTmKMJzvk/wCBXnGB0pgIs9mKBKyW2MeZYu4pyoPtJcX4If
VNoeELdGFss6XDXCs1a13/nVARd5XAOOXR3k3dOzxZggJ3ptGPqYAv5POivvBzmZ
oztX+0JQofy+HxpjgcP8397Wkl2sYFwA1CFZRw8tkIM3ZUrwWxXpzHtB/TSW9RbJ
gfc9/TNlYL3uCRxXuekzR+Lkuj/cPaTdfYlFFdomQxGMm2neB6ymD7iLNAYrCGi0
/SwdkVdZ4EjUFv15JzJrPYy71Q7m0nHbvPGhOU3TZrPqh2VuF5Swwnv0i3R4qXa2
vFgWhXWfX/HIW3Hs94lKGw5vjZ6m8Wv8JZfc44dttqkyndX7adqiE7X3Fh9k7TdE
z2BHCEw+6p9cgaWyPgjtuBv98FmOFGfyx9058YIGlb/TMAoSEeuP71tLb3SStjhg
PmzHQmg9AzwDgmN6v1Kp6iQVqFDG+nzgn+kAMYOPa7wXLXJaGNs3XCQVA3E65Qgz
Bf8ERY5JmD311mqefkdvzKZncOFaCcY/tB4g0pTfy7Uoy2tHsdB2YtEJZACQCHJb
P1Gbp5EIATH0TNy1DUI8MeebZOeCdF/tKaXqYJcpnVotCOPOhZeFI4A0XxjLDjVn
zd8HS14+qhvuS1Yf7h4/
=tl71
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig ARM update for v4.13:
1. Enable Exynos PRNG along with user-space crypto API.
* tag 'samsung-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable Exynos RNG and user-space crypto API
ARM: exynos_defconfig: Enable Exynos RNG and user-space crypto API
Signed-off-by: Olof Johansson <olof@lixom.net>
CPPI 4.1 DMA for MUSB, some commonly used USB devices, and
Lego Mindstorms EV3 battery driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZOTAuAAoJEGFBu2jqvgRNC4UP/0R5NZR+kNT0vcj7oaLNa1Zr
3HQCiWjvnbGLmBWHc0Ka49Gwk2QzvJPrVFsfXPcL4aqf1SoCeVKluVxLUEYrUO2I
Ewkh7XpuRXsb1GTK0a63t8PWu14qpjnpt7291YZJWMFJ/smxWvvEr9/4a4xFndzw
V+zRNr6YUN8k6r0X4jDjjbxdgEP+iGFKPj0bULvZw/B96zp3nUjbwA0roR4GXQB8
iXOSS0cP/28IipMj/MiVOklc2VA4aDq0MOA+y8src1nkFkZipPqCDruwIAbIfXSM
rQCNsefLn5ccnCpgK4ezyyBGJA67nbZ3RHed+TEedvQNnDgVE70H3gXCuai49hFE
ABMXsSaL5SbXWpDplpB8qrx2ImJ1cgfywwZD2pAIjeNZq2XjReDVEj4+LjbuzGw1
w8F0R12B0HR/4psFnzac0qjnN2OxvV3fhE64CjdbO93kGYgl6OyWJ+IHmnosBL88
xf8gPFQjchmORKH7ehihNolqsDWi/zOsEYy9vIk9fvekpxln9Dkq14n1rRS4bAiI
7Gjgd2bHkEVDVD41zC+tz16CKsJl4Dj9vvjKvnHbTXfExT9S4XaFXa8g3gTRicFw
l2tU8fe+qMefmd4v84bBlyGg4ocaPJV50dYzwN2jP9WVDD1zf1cXgguUV5939MsH
iLEhsn9SlCj01K3m/llG
=FfEE
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.13/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Re-sync of davinci_all_defconfig with savedefconfig and enable
CPPI 4.1 DMA for MUSB, some commonly used USB devices, and
Lego Mindstorms EV3 battery driver.
* tag 'davinci-for-v4.13/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable CPPI 4.1 USB OTG DMA
ARM: davinci_all_defconfig: enable USB audio/video device support
ARM: davinci_all_defconfig: cleanup with savedefconfig
ARM: davinci_all_defconfig: enable LEGO MINDSTORMS EV3 battery module
Signed-off-by: Olof Johansson <olof@lixom.net>
Select CONFIG_IMX7D_ADC so that the i.MX7 ADC driver can be
built by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that the GPIO driver also supports PWM operation, enable the PWM
framework and fan driver in mvebu_v7_defconfig.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427297/
[Ralph Sennhauser: add fan driver to defconfig]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
mtdtests module has some useful tests to verify that
mtd drivers like davinci_nand are working correctly.
Enable it in davinci_all_defconfig to make testing and
debug easier.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Setting trip points is supported by the imx thermal driver and it is
useful to be able to test this without adjusting config.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In order to use the serial and ethernet USB gadget support on
Raspberry Zero, we also need to enable the PHY driver, kernel module
and OTG support.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Generate new defconfig to get rid of obsolete Kconfig entries:
- BUGVERBOSE was changed into DEBUG_BUGVERBOSE and will be enabled by
default (it is useful);
- DETECT_SOFTLOCKUP was changed into LOCKUP_DETECTOR;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- S3C_LOWLEVEL_UART_PORT and S3C_DEV_FB are invalid for S5P;
- S5PV210_SETUP_FB_24BPP is gone;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- S3C_BOOT_ERROR_RESET, SND_S3C24XX_SOC and SND_SOC_SMDK_WM9713 are
gone;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- NET_ETHERNET, SND_S3C24XX_SOC are gone;
- CRYPTO_FIPS is changed to no (cannot be part of module);
- BINFMT_AOUT cannot be selected anymore;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- S3C_BOOT_ERROR_RESET, SMDK2440_CPU2442 are gone;
- ARM_THUMB is changed to yes (selected by default);
- BINFMT_AOUT cannot be selected anymore;
- rest of entries is being removed by default values;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Generate new defconfig to get rid of obsolete Kconfig entries:
- RFKILL_REGULATOR is gone;
- COMMON_CLK_MAX77802 was merged into COMMON_CLK_MAX77686;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SYSFS_DEPRECATED is now needed for SYSFS_DEPRECATED_V2;
- DEBUG_SPINLOCK_SLEEP was replaced by DEBUG_ATOMIC_SLEEP;
- Use proper DEBUG_S3C_UART1 for UART1;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SYSFS_DEPRECATED is now needed for SYSFS_DEPRECATED_V2;
- PWM is now needed for BACKLIGHT_PWM;
- DEBUG_SPINLOCK_SLEEP was replaced by DEBUG_ATOMIC_SLEEP;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- IP_NF_TARGET_LOG was replaced by NETFILTER_XT_TARGET_LOG;
- NF_NAT was replaced by IP_NF_NAT;
- SERIAL_DEV_BUS is now needed for BT_HCIUART_LL;
- TPS65010 is now needed for MACH_OSIRIS_DVS;
- DMADEVICES and S3C24XX_DMAC are now needed for MMC_S3C;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SYSFS_DEPRECATED is now needed for SYSFS_DEPRECATED_V2;
- USB_GADGET_S3C2410 was replaced by USB_S3C2410;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The config was not updated for some time so it needs updates to get the
same options as wanted initially:
- SERIAL_DEV_BUS is now needed for BT_HCIUART_LL;
- USB_GADGET_S3C2410 was replaced by USB_S3C2410;
- S3C24XX_DMAC is now needed for MMC_S3C;
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Re-order entries just like savedefconfig would do so it will be easier
to review the changes before actual savedefconfig.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
These configs are required for booting kernel in QCOM IPQ4019 boards.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This option was removed by "make savedefconfig" in
commit c5054a98bc ("ARM: imx_v6_v7_defconfig: Select SMSC_PHY")
This happened because CONFIG_DEBUG_FS was implicitly selected by
CONFIG_TREE_RCU_TRACE which defaulted to true because CONFIG_RCU_TRACE
was enabled by default by commit 961518259b ("rcu: Enable RCU
tracepoints by default to aid in debugging")
Recently however CONFIG_RCU_TRACE was completely removed by
commit 6e74c237c410 ("rcu: Remove debugfs tracing")
The result is that imx_v6_v7_defconfig no longer includes DEBUG_FS on
linux-next since next-20170517. This is bad, DEBUG_FS is extremely
useful for kernel introspection and testing.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
CPPI 4.1 DMA is now supported on AM18xx.
Update the config to use it instead of PIO mode.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This moves the mcp23s08 driver from gpio to pinctrl. Actual
pinctrl support for configuration of the pull-up resistors
follows in its own patch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Enable support for USB audio and video camera devices.
Tested on OMAP-L138 LCDK using Logitech webcam and
Plantronics headset.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
davinci_all_defconfig is out of sync with savedefconfig in some places.
Regenerate the default settings by:
$ make davinci_all_config
$ make savedefconfig
$ cp defconfig arch/arm/configs/davinci_all_defconfig
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It makes sense to have a stripped-down defconfig for just Gemini, as
it is a pretty small platform used in NAS etc, and will use appended
device tree. It is also quick to compile and test. Hopefully this
defconfig can be a good base for distributions such as OpenWRT.
I plan to add in the config options needed for the different
variants of Gemini as we go along.
Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the power supply module for the LEGO MINDSTORMS EV3 battery.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable the new Exynos pseudo random number generator driver and
user-space API to access crypto algorithms and devices (not only RNG).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable the new Exynos pseudo random number generator driver and
user-space API to access crypto algorithms and devices (not only RNG).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The MXS LRADC driver left staging and has been split. So re-enable
the driver and remove the obsolete entries.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In order to support systemd we need to enable CONFIG_CGROUPS.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the Controller Area Network (MCAN) driver compilation
for sama5 default configuration. Is used by sama5d2 SoC for instance.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This enables by default the high resolution timers on sama5d2 platforms.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This makes Atmel sama5 platforms' system tickless when idle.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Enable more common cpufreq governors in imx defconfig because this is
very useful for testing. In particular you can't use cpufreq-set -f
$FREQ without explicitly defining CONFIG_CPU_FREQ_GOV_USERSPACE=y.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We've traditionally kept defconfig updates in a separate branch, often to
encourage submaintainers to handle those patches separately to avoid conflicts
on the shared files. The amount of changes seem to be decreasing though, so
we might rethink how we handle this going forward.
There really isn't much to write about here. The bulk of changes here
are enabling drivers for whatever platforms the hardware is found on
(and multi-configs).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HXd+
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM: SoC defconfig updates from Olof Johansson:
"We've traditionally kept defconfig updates in a separate branch, often
to encourage submaintainers to handle those patches separately to
avoid conflicts on the shared files. The amount of changes seem to be
decreasing though, so we might rethink how we handle this going
forward.
There really isn't much to write about here. The bulk of changes here
are enabling drivers for whatever platforms the hardware is found on
(and multi-configs)"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
multi_v7_defconfig: make Rockchip usb2-phy built-in
ARM: omap2plus_defconfig: Enable droid 4 devices
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules
ARM: configs: aspeed: Add new drivers
ARM: configs: aspeed: Update configs for BMC systems
ARM: omap2plus_defconfig: Enable TI Ethernet PHY
ARM: configs: Add new config fragment to change RAM start point
ARM: configs: stm32: Add I2C support
multi_v7_defconfig: make Rockchip DRM drivers built-in
ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max value
ARM: imx_v6_v7_defconfig: Select SMSC_PHY
ARM: davinci_all_defconfig: convert to use libata PATA
ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers
ARM: omap2plus_defconfig: enable ahci-dm816 module
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
ARM: bcm2835: Enable missing CMA settings for VC4 driver
ARM: socfpga: updates for socfpga_defconfig
ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
Add newly unstreamed drivers to the defconfigs for the Aspeed SoCs.
The defconfigs are reworked to be useful for development and testing
of OpenBMC on these systems.
-----BEGIN PGP SIGNATURE-----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=/Q63
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.12-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig
Aspeed defconfig updates for 4.12
Add newly unstreamed drivers to the defconfigs for the Aspeed SoCs.
The defconfigs are reworked to be useful for development and testing
of OpenBMC on these systems.
* tag 'aspeed-4.12-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: configs: aspeed: Add new drivers
ARM: configs: aspeed: Update configs for BMC systems
ARM: aspeed: Add CONFIG_SPI_ASPEED_SMC
Signed-off-by: Olof Johansson <olof@lixom.net>
to update to use new ti-cpufreq driver, the rest is just
to enable drivers found on various devices:
- Update to use ti-cpufreq driver that we now have
- Enable SATA for ti81xx as a loadable module
- Enable Ethernet PHY for DP83848
- Enable modem related modules for PPP, QMI and USB ACM
as loadable modules
- Enable droid 4 related drivers as lodable modules except
for PMIC and regulator so eMMC can be used for root
-----BEGIN PGP SIGNATURE-----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=4IRe
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Defconfig updates for omaps for v4.12 merge window. Mostly
to update to use new ti-cpufreq driver, the rest is just
to enable drivers found on various devices:
- Update to use ti-cpufreq driver that we now have
- Enable SATA for ti81xx as a loadable module
- Enable Ethernet PHY for DP83848
- Enable modem related modules for PPP, QMI and USB ACM
as loadable modules
- Enable droid 4 related drivers as lodable modules except
for PMIC and regulator so eMMC can be used for root
* tag 'omap-for-v4.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable droid 4 devices
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules
ARM: omap2plus_defconfig: Enable TI Ethernet PHY
ARM: omap2plus_defconfig: enable ahci-dm816 module
ARM: omap2plus_defconfig: Enable support for ti-cpufreq
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable MAX11801 and HID_MULTITOUCH touch drivers.
- Enable SMSC_PHY driver, as imx6sl-evk board has a LAN8720A ethernet
phy supported by it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEbBAABAgAGBQJY65FXAAoJEFBXWFqHsHzOyfYH9A3tKXcNwIUJhzfpLI9FTi4h
1w3j1dJO0hzj8Apd+7o7bJWXLDsNGAs0We8sYeZWjeyOol2wMt6Lc4LrSrn9lQhp
LlLzEKeqiX4UI+Az6YCv5AG8XefCUtb3w5zK2nQkC8w3Ge4fs1l7X9mJCMpRYtPQ
D3rqcksRKoAAVXmaO3d1MHNi2lycVUVdxHW/z7S68oeL6gqEAXC07op9in4TJCaY
zwIvXxuLta1GQszwPGUFRXIb70OhLbJ48433gUZDLLuItlgFAmIEAn9nzFXN3q3p
dpuEeYKSD0IeJZqIkLzaBZ3OCm4/gNrbsduSzmihZSm9W03mJAOoqgnqQBbfTA==
=5aru
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig updates for 4.12:
- Enable MAX11801 and HID_MULTITOUCH touch drivers.
- Enable SMSC_PHY driver, as imx6sl-evk board has a LAN8720A ethernet
phy supported by it.
* tag 'imx-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select SMSC_PHY
ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Enable DYNAMIC_DEBUG because it is useful for debugging.
2. Increase CMA memory region to allow handling H.264 1080p videos.
-----BEGIN PGP SIGNATURE-----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=ScYV
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig ARM update for v4.12:
1. Enable DYNAMIC_DEBUG because it is useful for debugging.
2. Increase CMA memory region to allow handling H.264 1080p videos.
* tag 'samsung-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96
ARM: exynos_defconfig: Enable DYNAMIC_DEBUG and get rid of old ext3
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable QCOM remoteproc and related drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ma84
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Qualcomm ARM Based defconfig Updates for v4.12
* Enable QCOM remoteproc and related drivers
* tag 'qcom-defconfig-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
Some patches to enable new modules in the defconfig.
-----BEGIN PGP SIGNATURE-----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=a4lF
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig
Allwinner defconfig changes for 4.12
Some patches to enable new modules in the defconfig.
* tag 'sunxi-defconfig-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-in
ARM: multi_v7_defconfig: Enable AC100 RTC driver
ARM: multi_v7_defconfig: Switch sunxi RSB driver from module to built-in
ARM: sunxi_defconfig: Enable AC100 RTC driver
Signed-off-by: Olof Johansson <olof@lixom.net>
PATA driver for DaVinci.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hjLw
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.12/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Shift to the newly introduced PalmChip
PATA driver for DaVinci.
* tag 'davinci-for-v4.12/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: convert to use libata PATA
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
----------
- Enable I2C
- Add config fragment for RAM start point
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DGsD
-----END PGP SIGNATURE-----
Merge tag 'stm32-defconfig-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/defconfig
STM32 defconfig updates for v4.12, round 1.
Highlights:
----------
- Enable I2C
- Add config fragment for RAM start point
* tag 'stm32-defconfig-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: configs: Add new config fragment to change RAM start point
ARM: configs: stm32: Add I2C support
Signed-off-by: Olof Johansson <olof@lixom.net>
The phy is necessary for the dwc2 controllers driving the usb ports
on all arm32 Rockchip socs. Both the dwc2 as well as usb downstream
drivers (mass-storage as well as usb networking) are already built-in,
so only the phy is missing to allow booting from usb-devices without
to much hassle.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to
be able to mount root on the eMMC. And then POWER_RESET_GPIO
is good to have built-in. The rest of the devices can be loadable
modules.
This gets various devices such as regulators, touchscreen, power
button, HDMI audio, LEDs, RTC, and ADC working.
Note that omapdrm needs to be configured manually as we're still
using omapfb by default.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of
that indirection. Update defconfigs which had it.
While at it, fix dependencies such that EDAC depends on RAS for the
tracepoints.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-edac@vger.kernel.org
- LPC Host Controller
- Pulse Width Modulation and Tachometer
- Analog to Digital converter
These three new drivers for the Aspeed SoCs will appear in 4.12. This
defconfig is based on next-20170406.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Developers can develop and users can test with this config against an
OpenBMC userspace. It turns off debugging features to ensure network
performance is high.
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add STM32 crypto support in stm32_defconfig file.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DP83848_PHY i.e. [TI TLK10X 10/100 Mbps PHY] is used on the
am335x-icev2 board. Enable the PHY driver for it.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
These cause warnings in linux-next, as the symbols have become 'bool' there:
arch/arm/configs/multi_v7_defconfig:600:warning: symbol value 'm' invalid for ROCKCHIP_INNO_HDMI
arch/arm/configs/multi_v7_defconfig:599:warning: symbol value 'm' invalid for ROCKCHIP_DW_MIPI_DSI
arch/arm/configs/multi_v7_defconfig:598:warning: symbol value 'm' invalid for ROCKCHIP_DW_HDMI
arch/arm/configs/multi_v7_defconfig:597:warning: symbol value 'm' invalid for ROCKCHIP_ANALOGIX_DP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
please pull the following:
- Gerd enables the BCM2835 MMC driver which yields better performance than the
default one (iProc)
-----BEGIN PGP SIGNATURE-----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=lxDs
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.12/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Pull "Broadcom defconfig changes for 4.12" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs defconfig updates for 4.12,
please pull the following:
- Gerd enables the BCM2835 MMC driver which yields better performance than the
default one (iProc)
* tag 'arm-soc/for-4.12/defconfig' of http://github.com/Broadcom/stblinux:
arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
ARM: bcm2835: Enable missing CMA settings for VC4 driver
Video capture and display on DA850 and
an ADC driver thats used by Lego EV3.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wj14
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.12/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Pull "DaVinci defconfig updates for v4.12" from Sekhar Nori:
DaVinci defconfig updates for enabling
Video capture and display on DA850 and
an ADC driver thats used by Lego EV3.
* tag 'davinci-for-v4.12/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable TI ADS7950
ARM: davinci_all_defconfig: enable IRQ support for pca953x
ARM: davinci_all_defconfig: enable VPIF display modules
stm32_defconfig is used for several STM32 MCU: STM32F429, STM32F469,
STM32F746 and now STM32H743. Each of MCU listed have different interrupts
number mapped on NVIC. STM32F429: 81, STM32F469: 92, STM32F746: 97 and
STM32H743: 149. I could set CPU_V7M_NUM_IRQ to 149 but in order to avoid
forgetting to update this value for next STM32 MCU I prefer to set it to
max value: 240.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The imx6sl-evk board has a LAN8720A ethernet phy supported by SMSC_PHY.
Add this driver to the default imx config since the device is present on
one of the evaluation boards.
This used to work mostly fine with the generic phy driver until
commit 0878fff1f4 ("net: phy: Do not perform software reset for
Generic PHY"). The fact that soft reset is no longer performed
apparently causes RX to sometimes failes which can cause netboot to
timeout on DHCP. This is eventually retried and it works after link
up/down but can takes 90 seconds to reach the login prompt.
This was generated with "make savedefconfig" and it includes a few
additional minor cleanups.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:
* testing efforts are divided between two subsystems
* having duplicate drivers for same hardware confuses users
This patch converts davinci_all_defconfig to use libata PATA
drivers.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[b.zolnierkie: split from bigger patch + added patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
An adsp-pil node is present in at least the MSM8974 SoC. Simply enable
all Qualcomm remoteproc drivers to avoid more work in the future.
The SMP2P driver is required for adsp-pil to initialize correctly.
Enable the SMSM driver at Bjorn Andersson's request: "We also need
CONFIG_QCOM_SMSM=y here, its currently used to signal state of the ring
buffers for WiFi."
CONFIG_QCOM_WCNSS_CTRL is required to load firmware/configuration data
into the WCNSS core, which handles WiFi and Bluetooth.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This is now supported on the dm8168-evm board, so enable it in
the defconfig for omap2+.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Currently bcm2835_defconfig has CMA disabled which makes the
HDMI output on a Raspberry Pi 1 stop working during boot:
fb: switching to vc4drmfb from simple
Console: switching to colour dummy device 80x30
[drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vc4-drm soc:gpu: failed to allocate buffer with size 9216000
vc4-drm soc:gpu: Failed to set initial hw configuration.
So enable CMA and DMA_CMA in bcm2835_defconfig.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 4400d9ac05 ("ARM: bcm2835: Enable the VC4 graphics driver in the defconfig")
Reviewed-by: Eric Anholt <eric@anholt.net>
This patch enables Altera TSE support in socfpga_defconfig
Signed-off-by: Jia Jie Ho <ho.jia.jie@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Select CONFIG_HID_MULTITOUCH so that we can have multi touchscreen
funtionality via USB by default on Engicam i.CoreM6 Quad with
OpenFrame Cap 10.1 display boards.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Select CONFIG_TOUCHSCREEN_MAX11801 so that we can have touchscreen
funtionality by default on Engicam i.CoreM6 Quad boards.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Current CMA size of 64 Mbytes is right on the edge of being small when
several drivers need to allocate large CMA buffers.
For example, if the s5p-mfc driver needs to pre-allocate CMA memory to
decode a H.264 1080p video, then there won't be enough CMA memory left
for other drivers, such as the exynos-drm driver that may need to
allocate GEM buffers for the display manager.
Increasing CMA size to 96 Mbytes in exynos_defconfig addresses use-cases
such as these.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
DYNAMIC_DEBUG is quite useful for debugging kernels and should not cause
noticeable performance regressions. It makes the kernel bigger (around 4%)
but this difference should not impact typical developer and reference
usage of this defconfig.
Sizes:
zImage-old: 4641496 bytes
zImage-new: 4811384 bytes
text data bss dec hex filename
7031229 2570916 327016 9929161 9781c9 vmlinux-old
7205921 2800052 327016 10332989 9dab3d vmlinux-new
Additionally, remove the EXT3_FS symbol because it is entirely replaced
by EXT4_FS.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
This enables the TI ADS7950 IIO driver. This is used on LEGO MINDSTORMS
EV3. The other IIO configs removed in this patch are selected by
CONFIG_TI_ADS7950, so they are not actually being desabled.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
AM335x, AM437x, DRA7xx, and AM57xx platforms all now depend on
ti-cpufreq driver to enable proper OPPs for use with cpufreq, so
enable the same.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We need IRQs from the tca6416 expander for vpif capture to work on the
da850-evm board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable the VPIF display module and the video encoder present on the
da850-evm UI board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The AXP20X regulator support is currently built as a module, which means
it's not available until the root fs has been mounted, but the boot loader
might not have enabled the required regulators, so build their drivers
into the kernel.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The sunxi RSB bus is used for peripherals like voltage regulators and
real-time clocks which should be available early in the boot process.
As a module, the driver will not be available until the root fs has been
mounted, so build the driver into the kernel.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The moxart defconfig wasn't even building a kernel for Moxart,
it was building a kernel for V4T on the nothing platform. Switch
to MULTI_V4 and keep the right drivers, update a few selections.
Now it (presumably) builds a minimalist Moxart kernel again.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Defconfig additions, removals, etc. Almost all of them just turn on
drivers that we want on some platform, usually after the driver
has been merged into mainline.
There is now a new defconfig file for tango4.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=noKQ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Defconfig additions, removals, etc. Almost all of them just turn on
drivers that we want on some platform, usually after the driver has
been merged into mainline.
There is now a new defconfig file for tango4"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: multi_v7_defconfig: enable pstore configs
ARM: multi_v7_defconfig: enable some newly added crypto modules
ARM: davinci_all_defconfig: enable SATA modules
arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT
arm64: defconfig: enable CONFIG_MTD_BLOCK
ARM: Import tango4_defconfig
ARM: omap2plus_defconfig: Enable support for RTC M41T80
ARM: omap2plus_defconfig: Enable support for micrell phys
ARM: vf610m4: defconfig: enable EXT4 filesystem
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
arm64: defconfig: Enable NUMA and NUMA_BALANCING
arm64: defconfig: enable SMMUv3 config
ARM: davinci_all_defconfig: enable iio
ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
ARM: configs: stm32: Add RTC support in STM32 defconfig
ARM: defconfig: qcom: add APQ8060 DragonBoard devices
ARM: qcom_defconfig: enable thermal sensors
ARM: qcom_defconfig: add ahci configs
ARM: qcom_defconfig: add pcie and atl1c ethernet configs
ARM: qcom_defconfig: add usb related configs
...
Pull networking updates from David Miller:
"Highlights:
1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
Varadhan.
2) Simplify classifier state on sk_buff in order to shrink it a bit.
From Willem de Bruijn.
3) Introduce SIPHASH and it's usage for secure sequence numbers and
syncookies. From Jason A. Donenfeld.
4) Reduce CPU usage for ICMP replies we are going to limit or
suppress, from Jesper Dangaard Brouer.
5) Introduce Shared Memory Communications socket layer, from Ursula
Braun.
6) Add RACK loss detection and allow it to actually trigger fast
recovery instead of just assisting after other algorithms have
triggered it. From Yuchung Cheng.
7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.
8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.
9) Export MPLS packet stats via netlink, from Robert Shearman.
10) Significantly improve inet port bind conflict handling, especially
when an application is restarted and changes it's setting of
reuseport. From Josef Bacik.
11) Implement TX batching in vhost_net, from Jason Wang.
12) Extend the dummy device so that VF (virtual function) features,
such as configuration, can be more easily tested. From Phil
Sutter.
13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
Dumazet.
14) Add new bpf MAP, implementing a longest prefix match trie. From
Daniel Mack.
15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.
16) Add new aquantia driver, from David VomLehn.
17) Add bpf tracepoints, from Daniel Borkmann.
18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
Florian Fainelli.
19) Remove custom busy polling in many drivers, it is done in the core
networking since 4.5 times. From Eric Dumazet.
20) Support XDP adjust_head in virtio_net, from John Fastabend.
21) Fix several major holes in neighbour entry confirmation, from
Julian Anastasov.
22) Add XDP support to bnxt_en driver, from Michael Chan.
23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.
24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.
25) Support GRO in IPSEC protocols, from Steffen Klassert"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
Revert "ath10k: Search SMBIOS for OEM board file extension"
net: socket: fix recvmmsg not returning error from sock_error
bnxt_en: use eth_hw_addr_random()
bpf: fix unlocking of jited image when module ronx not set
arch: add ARCH_HAS_SET_MEMORY config
net: napi_watchdog() can use napi_schedule_irqoff()
tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
net/hsr: use eth_hw_addr_random()
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: switch to build_skb() in the RX path
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: remove unused register definitions
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
net: mvpp2: release reference to txq_cpu[] entry after unmapping
net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
...
CONFIG_SET_MODULE_RONX to the more sensible CONFIG_STRICT_KERNEL_RWX and
CONFIG_STRICT_MODULE_RWX.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=7KhR
-----END PGP SIGNATURE-----
Merge tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull rodata updates from Kees Cook:
"This renames the (now inaccurate) DEBUG_RODATA and related
SET_MODULE_RONX configs to the more sensible STRICT_KERNEL_RWX and
STRICT_MODULE_RWX"
* tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX
arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common
- Operating Performance Points (OPP) framework fixes, cleanups and
switch over from RCU-based synchronization to reference counting
using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach).
- cpufreq core cleanups and documentation updates (Viresh Kumar,
Rafael Wysocki).
- New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer).
- New cpufreq-dt sub-driver for TI SoCs requiring special handling,
like in the AM335x, AM437x, DRA7x, and AM57x families, along with
new DT bindings for it (Dave Gerlach, Paul Gortmaker).
- ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian).
- intel_pstate driver updates including a new sysfs knob to control
the driver's operation mode and fixes related to the no_turbo
sysfs knob and the hardware-managed P-states feature support
(Rafael Wysocki, Srinivas Pandruvada).
- New interface to export ultra-turbo frequencies for the powernv
cpufreq driver (Shilpasri Bhat).
- Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Wei Yongjun).
- devfreq core fixes, mostly related to the sysfs interface exported
by it (Chanwoo Choi, Chris Diamand).
- Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo
Choi).
- Device PM QoS extension to support CPUs and support for per-CPU
wakeup (device resume) latency constraints in the cpuidle menu
governor (Alex Shi).
- Wakeup IRQs framework fixes (Grygorii Strashko).
- Generic power domains framework update including a fix to make
it handle asynchronous invocations of *noirq suspend/resume
callbacks correctly (Ulf Hansson, Geert Uytterhoeven).
- Assorted fixes and cleanups in the core suspend/hibernate code,
PM QoS framework and x86 ACPI idle support code (Corentin Labbe,
Geert Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers).
- Update of the analyze_suspend.py script is updated to version 4.5
offering multiple improvements (Todd Brandt).
- New tool for intel_pstate diagnostics using the pstate_sample
tracepoint (Doug Smythies).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=57xJ
-----END PGP SIGNATURE-----
Merge tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of changes go into the Operating Performance Points (OPP)
framework and cpufreq this time, followed by devfreq and some
scattered updates all over.
The OPP changes are mostly related to switching over from RCU-based
synchronization, that turned out to be overly complicated and
problematic, to reference counting using krefs.
In the cpufreq land there are core cleanups, documentation updates, a
new driver for Broadcom BMIPS SoCs, a new cpufreq-dt sub-driver for TI
SoCs that require special handling, ARM64 SoCs support for the qoriq
driver, intel_pstate updates, powernv driver update and assorted
fixes.
The devfreq changes are mostly fixes related to the sysfs interface
and some Exynos drivers updates.
Apart from that, the cpuidle menu governor will support per-CPU PM QoS
constraints for the wakeup latency now, some bugs in the wakeup IRQs
framework are fixed, the generic power domains framework should handle
asynchronous invocations of *noirq suspend/resume callbacks from now
on, the analyze_suspend.py script is updated and there is a new tool
for intel_pstate diagnostics.
Specifics:
- Operating Performance Points (OPP) framework fixes, cleanups and
switch over from RCU-based synchronization to reference counting
using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach)
- cpufreq core cleanups and documentation updates (Viresh Kumar,
Rafael Wysocki)
- New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer)
- New cpufreq-dt sub-driver for TI SoCs requiring special handling,
like in the AM335x, AM437x, DRA7x, and AM57x families, along with
new DT bindings for it (Dave Gerlach, Paul Gortmaker)
- ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian)
- intel_pstate driver updates including a new sysfs knob to control
the driver's operation mode and fixes related to the no_turbo sysfs
knob and the hardware-managed P-states feature support (Rafael
Wysocki, Srinivas Pandruvada)
- New interface to export ultra-turbo frequencies for the powernv
cpufreq driver (Shilpasri Bhat)
- Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Wei Yongjun)
- devfreq core fixes, mostly related to the sysfs interface exported
by it (Chanwoo Choi, Chris Diamand)
- Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo
Choi)
- Device PM QoS extension to support CPUs and support for per-CPU
wakeup (device resume) latency constraints in the cpuidle menu
governor (Alex Shi)
- Wakeup IRQs framework fixes (Grygorii Strashko)
- Generic power domains framework update including a fix to make it
handle asynchronous invocations of *noirq suspend/resume callbacks
correctly (Ulf Hansson, Geert Uytterhoeven)
- Assorted fixes and cleanups in the core suspend/hibernate code, PM
QoS framework and x86 ACPI idle support code (Corentin Labbe, Geert
Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers)
- Update of the analyze_suspend.py script is updated to version 4.5
offering multiple improvements (Todd Brandt)
- New tool for intel_pstate diagnostics using the pstate_sample
tracepoint (Doug Smythies)"
* tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (85 commits)
MAINTAINERS: cpufreq: add bmips-cpufreq.c
PM / QoS: Fix memory leak on resume_latency.notifiers
PM / Documentation: Spelling s/wrtie/write/
PM / sleep: Fix test_suspend after sleep state rework
cpufreq: CPPC: add ACPI_PROCESSOR dependency
cpufreq: make ti-cpufreq explicitly non-modular
cpufreq: Do not clear real_cpus mask on policy init
tools/power/x86: Debug utility for intel_pstate driver
AnalyzeSuspend: fix drag and zoom bug in javascript
PM / wakeirq: report a wakeup_event on dedicated wekup irq
PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs
PM / wakeirq: Enable dedicated wakeirq for suspend
cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms
cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
Documentation: dt: add bindings for ti-cpufreq
PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
cpufreq: qoriq: Don't look at clock implementation details
cpufreq: qoriq: add ARM64 SoCs support
PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n
cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata()
...
This patch enables the Qualcomm RPM based Clock Controller present on
A-family boards.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It's useful to get testing on these features on various boards (e.g., on
KernelCI), and (when they're working) the ramoops feature is extremely
helpful for debugging live systems.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the new accelerated CRC32(C), CRC-T10DIF and ChaCha20 drivers
as modules for multi_v7_defconfig builds.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Gwrq
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.11/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Pull "Enable SATA support found on DA850 SoC" from Sekhar Nori:
* tag 'davinci-for-v4.11/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: enable SATA modules
Both of these options are poorly named. The features they provide are
necessary for system security and should not be considered debug only.
Change the names to CONFIG_STRICT_KERNEL_RWX and
CONFIG_STRICT_MODULE_RWX to better describe what these options do.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
A single patch to enable the thermal DT support in sunxi_defconfig
-----BEGIN PGP SIGNATURE-----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=tqpm
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Pull "Allwinner defconfig changes for 4.11" from Maxime Ripard:
A single patch to enable the thermal DT support in sunxi_defconfig
* tag 'sunxi-defconfig-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Add CONFIG_THERMAL_OF
The symbols can no longer be used as loadable modules, leading to a harmless Kconfig
warning:
arch/arm/configs/imote2_defconfig:60:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/arm/configs/imote2_defconfig:59:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
arch/arm/configs/ezx_defconfig:68:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/arm/configs/ezx_defconfig:67:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
Let's make them built-in.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This doesn't have any benefit apart from saving a small amount of memory
when it is disabled. The ifdef hackery in the code makes it dirty
unnecessarily.
Clean it up by removing the Kconfig option completely. Few defconfigs
are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with
CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the da850-ahci driver to davinci defconfig.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
- Select wireless extensions option for imx_v6_v7_defconfig, so that
wireless works out of box with userspace tools such as 'iwconfig'.
- Enable EXT4 filesystem support for vf610m4_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjWf2AAoJEFBXWFqHsHzOSicH/Rg+X7Qat+pMxINB7+enJqlw
mIM5WTUwhO4txugFD84ybcBitC/+t/kS5ffEM7ckkDDn6p6bN0K9vcU137V/CkE2
cMHgnuawXs3qCu4D+h4X3MsdF/AWTOD20dv1W5QMhC9/kANP2emQ6ohB5Wee0Gmx
5Mi4UaD0QNYrFsukayWhQ45i0RbsNRdiyzAntIpY1Xz8JJGL/ufTk233wtfxihsV
8MQw/Ar1Q3Hz8+eIKj+9dqDKV5AUrXQ3GvrvTfwlXlLM+NNSN5UWfJsbzob9754P
h02zRhjtQfjFKTUVAJKQPTNPci8b+8InnKyLgqSNSAnb/2PXtJB0AlFXJfaZ/LM=
=VjCo
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig updates for 4.11:
- Select wireless extensions option for imx_v6_v7_defconfig, so that
wireless works out of box with userspace tools such as 'iwconfig'.
- Enable EXT4 filesystem support for vf610m4_defconfig.
* tag 'imx-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: vf610m4: defconfig: enable EXT4 filesystem
ARM: imx_v6_v7_defconfig: Select wireless extensions option
Signed-off-by: Olof Johansson <olof@lixom.net>
- Switch to use LIS3LV02DL IIO driver instead of the
LIS3LC02D misc driver
- Set CONFIG_SERIAL_8250_RUNTIME_UARTS=6 to avoid runtime
warnings on omap5 and dra7
- Enable ksz9021 phy and m41t80 rtc as they are used at
least on phyCORE-AM335x
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAliHbxYRHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXPLDBAAmEKb4eMFYBJ2Df48PugoIhslvfS/in8a
3mNtH8RY9TzoB7+wu2535hVifBGrLtg10TateZLzJtGNZ0eZurms+gvP4pP+Pgsw
+aUz3pQgYyx9xCdvPR4rGxrgU7fjk+NI8JqgoPgVo6WU/+vWpvFu8TJguSst1VDX
jxSeQUOvDDK5N3w42WSiLrecg+hCiZqiMbK/+UtuJvgfByeVqA3Azk8/imQxOISU
A2TNCTlcCgSiCEOueIP9JDJZuUkqeswzThhNUksRfl3WhjOyXso2iOqvN2tbUH5o
gLC3GSTmBVgu0O5tf8Zjnqkp+2aAKgb6Ilwzcjk0FkRfCty/wnJAGh/izfUJTcPK
aza99As0WFFKmRiD/9QNKaoDptTINQAA8SpXLNp/KBvok67j84YoP3SXUC7fwnYd
UnC9DGleBBhj/6I7S9TcBdn06lTDXZ0vvFGXQTTxQG/u6erI+DuzMYRbrBEO5e1H
L44BSL7/enZ3Bk9DzqkrIuJudXYuHxxMsjL1J4IdA8YBrs6JhByBEjFkyzVR3CWH
1AhCtZWTAVGSebTSgVUompCQfynond9prae0pUz+p7GQzXQcMnmxh5rWHM9OTV2C
3PnFb6brhLomkIoAujgH3O60N9EvpXKx+hl6JGSXB0Gorf4zU7INswZkjLtoZhNo
FyghpmnV/W0=
=Vv0t
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Few omap2plus_defconfig changes for v4.11 merge window:
- Switch to use LIS3LV02DL IIO driver instead of the
LIS3LC02D misc driver
- Set CONFIG_SERIAL_8250_RUNTIME_UARTS=6 to avoid runtime
warnings on omap5 and dra7
- Enable ksz9021 phy and m41t80 rtc as they are used at
least on phyCORE-AM335x
* tag 'omap-for-v4.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable support for RTC M41T80
ARM: omap2plus_defconfig: Enable support for micrell phys
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
ARM: defconfig: omap2plus: switch LIS3LV02DL driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Import a minimal defconfig for tango4 boards.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The phyCORE-AM335x SoM has a RV4162 RTC populated which is supported
by the M41T80 driver. Enabled it so make the RTC support on the SoM
available.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The phyCORE-AM335x SoM with PCM-953 carrierboard has a
KSZ9021 phy mounted. To add support for this we need to enable
the micrell phy driver in the config.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable EXT4_FS to have rootfs in EXT[2-4].
Other changes are result of savedefconfig keeping minimal config (even
without enabling EXT4_FS, these would be present).
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This enables the iio subsystem. This will be used by LEGO MINDSTORMS EV3,
which has an ADS7957 chip.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Just the one commit that updates our defconfigs with network (ftgmac100
and ncsi), bt ipmi, gpio and ncsi.
ARM: configs: Update Aspeed with new drivers
-----BEGIN PGP SIGNATURE-----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=307A
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig
Aspeed defconfig updates for 4.11
Just the one commit that updates our defconfigs with network (ftgmac100
and ncsi), bt ipmi, gpio and ncsi.
* tag 'aspeed-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: configs: Update Aspeed with new drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add driver support for the Axentia TSE-850
-----BEGIN PGP SIGNATURE-----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=fZjs
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig
defconfig for 4.11:
- Add driver support for the Axentia TSE-850
* tag 'at91-ab-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: sama5_defconfig: add support for the Axentia TSE-850 board
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Cleanup from old MACHs in s5pv210.
2. Enable IP_MULTICAST for libnss-mdns.
-----BEGIN PGP SIGNATURE-----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=3+O7
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig update for v4.11:
1. Cleanup from old MACHs in s5pv210.
2. Enable IP_MULTICAST for libnss-mdns.
* tag 'samsung-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Enable IP multicast
ARM: s5pv210_defconfig: Remove old MACHs
Signed-off-by: Olof Johansson <olof@lixom.net>
- enables Marvell PHY support
- enable MTD(I2C EEPROM), and NAND support
- enable SPI, RTC and LED support
- enables OF CONFIGFS to support DTS overlays
- enables more FS options
- enables A10 hwmon support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYdlZIAAoJEBmUBAuBoyj0J4MP/1L6tUv43jN9vzFISGlXCmQ/
O23QsY6ZNbpvFxXsS4DBJ3eX8Mke9Efghcl0ngZtjz6W0erqTQF0ViSOuVMfm8v8
78mziOkAohZ6hOJTTLIkRE+P4+JWZonIGkimViL/ZwtQJVKCVdOF5Jjk0Tis+kCE
/7oSmRXbb9FMSIMBLzQpNqiWaGqubiVom20pAt14UEgUfy84LIkZiMqA8QWT4329
ZH56QdQMytdbpth1aAP1W1Q38IeC/Zgm0Y5H6+IKELOSpbXq1OU7tcGOK26Gqlkh
CTvpc1iUIBs3BJUWIAbLfruEVPL5vSVeLPd4QZeuL5iVV1kRndDVs6G0nQnnnVv6
8r/4nNJ/lpxVrS4nJSO6kI+xrp5tPxmWIyzocEomVgfv9mgy1OvzT3p1o6fExrl0
qTNdz7AUTI9rYJKEta+9Eyy0oMCvJ0XZhqaDiXapiSBie4C2PYiN8aVApPT3KcDT
lqGqiyVpERYUoxPfjULxJVYb/dcGc1K8zrPaAyv6lNybLRFbg+S7uPl7PEs8z/1w
u2xxK6/UJbWXnXIMxiBjEVeRLvyjKgWtuX+saqcofLzWnNI4vATnJzXfJ7UkAEJA
jYjh0sbdtdGeCmgz01J4zlnKjdyoHK2CPCWAiAFpNP8QAXk3QB7Hg5KTRpgMypJ7
73P3hXRYeAXhBR3MFm8+
=LMBa
-----END PGP SIGNATURE-----
Merge tag 'socfpga_defconfig_updates_for_v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig
SoCFPGA defconfig updates for v4.11
- enables Marvell PHY support
- enable MTD(I2C EEPROM), and NAND support
- enable SPI, RTC and LED support
- enables OF CONFIGFS to support DTS overlays
- enables more FS options
- enables A10 hwmon support
* tag 'socfpga_defconfig_updates_for_v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga_defconfig: update defconfig for SoCFPGA
Signed-off-by: Olof Johansson <olof@lixom.net>
SoCs, please pull the following changes:
- Valenting fixes two incorrect Kconfig symbols for BCM47xx: NVRAM and watchdog drivers
-----BEGIN PGP SIGNATURE-----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=LqGx
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.10/defconfig-fixes' of http://github.com/Broadcom/stblinux into fixes
This pull request contains fixes to multi_v7_defconfig for Broadcom ARM-based
SoCs, please pull the following changes:
- Valenting fixes two incorrect Kconfig symbols for BCM47xx: NVRAM and watchdog drivers
* tag 'arm-soc/for-4.10/defconfig-fixes' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: set bcm47xx watchdog
ARM: multi_v7_defconfig: fix config typo
Signed-off-by: Olof Johansson <olof@lixom.net>
This driver is no longer necessary since it was merged into stmmac.
Acked-by: Lars Persson <larper@axis.com>
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This default-enables the devices found on the APQ8060 DragonBoard
in the qcom_defconfig:
- EBI2 bus
- SMSC911x ethernet
- LEDs class and PM8058 LEDs driver, trigger and heartbeat
trigger (so we get heartbeat on the board by default)
- IIO framework, including the HRTimer trigger, KXSD9
accelerometer, MPU3050 gyroscope, AK8975 magnetometer and
BMP085 pressure sensor
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch enables thermal sensors and QFPROM support for qcom platforms.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch enables configs required to get SATA functionality working on
IFC6410 board.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
IFC6410 board has PCIE based ATL1C ethernet controller, so enable related configs.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable support for clocks, controlled by the RPM processor on
Qualcomm platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The Axentia TSE-850 is a SAMA5D3-based device designed to generate
FM subcarrier signals.
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux,
and IPMI BT. Enable these for both g4 and g5 platforms.
Signed-off-by: Joel Stanley <joel@jms.id.au>
This enables PWM and the TI ECAP and EHRWPM modules. These are used on LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables the DA8xx pinconf driver by default. It is needed by LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable:
* Recently added Enable r8a774[35] SoCs
* CMA for DMA to allow use of VIN with large frame sizes
* CONFIG_VIDEO_ADV7604 to allow use of HDMI input
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4Ph/
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM Based SoC Defconfig Updates for v4.11
Enable:
* Recently added Enable r8a774[35] SoCs
* CMA for DMA to allow use of VIN with large frame sizes
* CONFIG_VIDEO_ADV7604 to allow use of HDMI input
* tag 'renesas-defconfig-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable r8a774[35] SoCs
ARM: shmobile: defconfig: Enable r8a774[35] SoCs
ARM: shmobile: defconfig: Enable CMA for DMA
ARM: shmobile: defconfig: Enable CONFIG_VIDEO_ADV7604
Signed-off-by: Olof Johansson <olof@lixom.net>
The PXA defconfig compiles the legacy MPU3050 driver as a module,
but the device does not appear in device trees nor board files, so
remove this from the defconfig assuming it was a mistake to add it
in the first place.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The Tegra is currently configured to use the old input driver for the
MPU-3050. Switch to the new IIO driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The multi_v7 config enable the MPU3050 gyro input driver, but
there is now a dedicated IIO gyro driver for the same component,
which is the right subsystem to handle this. Replace it in the
defconfig. As we want the full IIO featureset and as other v7
systems will likely enjoy using IIO for their sensor work (such
as the Android-to-IIO userspace HAL), we take this opportunity to
turn on the standard sensor HRtimer triggering.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enables the Qualcomm RPM based Clock Controller present on
A-family boards.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
ADC driver depends on REGULATOR and IIO that are not yet selected.
Current hardware boards (like stm32f429i-eval) is using fixed
regulators.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
This enables the pwm-beeper module. This is used by the speaker on LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
All the Keystone 2 SoCs have an on-chip RAM called the MultiCore
Shared Memory (MSM) RAM managed by the Multicore Shared Memory
Controller (MSMC) that provides faster access compared to normal
DDR.
This patch enables the Generic on-chip SRAM driver that manages
this memory in software.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The OMAP2 plus defconfig lists the LIS3LC02D MISC driver
but there is nowadays a proper IIO driver for this accelerometer.
Switch the config to the new driver.
The IIO software triggers are helpful when using these devices
without a dedicated IRQ line, so activate those too.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
MARVELL_PHY - support for the Marvell PHY that is on most of the devkits
EEPROM_AT24 - support for I2C EEPROMs on the devkits
GPIO_ALTERA - support for Altera's GPIO driver
NAND - support for the Denali NAND controller along with MTD subsystem
SPI_DESIGNWARE - support for SPI that is on SoCFPGA
SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core
OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it
GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver
LEDS - support for the GPIO LEDs on the SoCFPGA devkits
RTC - support for the DS1307 RTC
JFFS2_FS - support for the JFFS2 filesystem
NFS_V4 - supports for v4 NFS
FUNCTION_TRACER - supports debug function tracing
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
To be able to use VIN with larger frame sizes CMA memory are needed for
DMA. If this is not enabled trying to capture large frames can result in
errors such as:
rcar-vin e6ef0000.video: dma_alloc_coherent of size 8388608 failed
A CMA area of 64MB are needed for v4l2-compliance to pass on all formats
on the largest possible frame size of 2048x2048.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The adv7612 is used on Gen2 boards (Lager, Koelsch and Gose) for HDMI
input. Enable support for this chip in shmobile_defconfig.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This enables the dumb-vga-dac driver by default for davinci boards.
The driver is needed for tilcdc support on da850-lcdk board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Select CONFIG_CFG80211_WEXT so that wireless can work out of the box
when using userspace tools such as 'iwconfig'.
Generated by manually selecting CONFIG_CFG80211_WEXT and
then running:
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
, which results in additional cleanup.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable media support and V4L2 capture, along with video decoders used
on da850 platforms.
Tested on da850-lcdk.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables CONFIG_THERMAL_OF by default for sunxi_defconfig. It is
required to get Allwinner SoCs' temperature from the GPADC driver.
The Allwinner SoCs all have an ADC that can also act as a touchscreen
controller and a thermal sensor. The first four channels can be used
either for the ADC or the touchscreen and the fifth channel is used for
the thermal sensor.
The thermal sensor requires the IP to be in touchscreen mode to return
correct values. Therefore, if the user is continuously reading the ADC
channel(s), the thermal framework in which the thermal sensor is
registered will switch the IP in touchscreen mode to get a temperature
value and requires a delay of 100ms (because of the mode switching),
then the ADC will switch back to ADC mode and requires also a delay of
100ms. If the ADC readings are critical to user and the SoC temperature
is not, the GPADC driver is capable of not registering the thermal
sensor in the thermal framework and thus, "quicken" the ADC readings. In
most use cases, the SoC temperature is more critical (for cpu throttling
for example or activating cooling devices) than ADC readings, thus it is
now enabled by default.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
NF_CT_PROTO_DCCP/SCTP/UDPLITE were switched from tristate to boolean so
defconfig needs to be adjusted to silence warnings:
warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Prior to Nikolay's commit dcd87999d, libnss-mdns (eg. to resolve
"foo.local" on the LAN using mDNS) worked without CONFIG_IP_MULTICAST
defined, but dcd87999d caused it to stop working without having
CONFIG_IP_MULTICAST defined explicitly.
Since exynos_defconfig did not previously define CONFIG_IP_MULTICAST,
mDNS used to work for users building with just exynos_defconfig, but
stopped working from dcd87999d.
Define CONFIG_IP_MULTICAST explicitly in exynos_defconfig as it appears
essential anyway.
Signed-off-by: Robie Basak <robie@justgohome.co.uk>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Defconfig additions, removals, etc. Most of these are small changes adding
the options for newly upstreamed drivers, or drivers needed for new board
support.
Bartlomiej Zolnierkiewicz has done a series of patches reducing the use
of CONFIG_IDE from 19 to 3 in favor of CONFIG_ATA.
Overall more patches than usual, but nothing big.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2XsL
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Defconfig additions, removals, etc. Most of these are small changes
adding the options for newly upstreamed drivers, or drivers needed for
new board support.
Bartlomiej Zolnierkiewicz has done a series of patches reducing the
use of CONFIG_IDE from 19 to 3 in favor of CONFIG_ATA.
Overall more patches than usual, but nothing big"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
ARM: davinci_all_defconfig: Enable da8xx usb otg
ARM: defconfig: drop GPIO_SYSFS on multiplatforms
ARM: multi_v7_defconfig: enable STMicroelectronics HVA driver
ARM: configs: Add new config fragment to change RAM start point
ARM: davinci_all_defconfig: Enable OHCI as module
ARM: defconfig: turn on the DT cpufreq for Integrator
ARM: omap2plus_defconfig: Run make savedefconfig to save some space
ARM: davinci_all_defconfig: add missing options for systemd
ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers
ARM: bcm2835: add thermal driver to default config
ARM: omap2plus_defconfig: Enable LP873X support
ARM: omap2plus_defconfig: Enable REGULATOR_GPIO
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004
ARM: socfpga_defconfig: enable FS configs to support Angstrom filesystem
ARM: config: Enable GPIO Key driver in stm32_defconfig
ARM: tegra: Enable GMI driver in default configuration
ARM: tegra: Enable SGTL5000 audio
ARM: tegra: Update default configuration for v4.9-rc1
ARM: socfpga: updates for socfpga_defconfig
ARM: davinci_all_defconfig: enable LED default-on trigger
...
Introduces remoteproc "subdevice" support, which allows remoteproc
driver to associate devices to the "running" state of the remoteproc,
allowing devices to be probed and removed as the remote processor is
booted, shut down or recovering from a crash.
Handling of virtio device resources was improved, vring memory is now
allocated as part of other memory allocation. This ensures that all
vrings for all virtio devices are allocated before we boot the remote
processor.
The debugfs mechanism for starting and stopping remoteproc instances was
replaced with a sysfs interface, also providing a mechanism for
specifying firmware to use by the instance. This allows user space to
load and boot use case specific firmware on remote processors.
New drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as
removal of the unused StE modem loader.
Finally support for crash recovery in the Qualcomm Wirelss subsystem
(used for WiFi/BT/FM on a number of platforms) and a number of bug fixes
and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/1kU
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.10' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
- introduce remoteproc "subdevice" support, which allows remoteproc
driver to associate devices to the "running" state of the remoteproc,
allowing devices to be probed and removed as the remote processor is
booted, shut down or recovering from a crash.
- handling of virtio device resources was improved, vring memory is now
allocated as part of other memory allocation. This ensures that all
vrings for all virtio devices are allocated before we boot the remote
processor.
- the debugfs mechanism for starting and stopping remoteproc instances
was replaced with a sysfs interface, also providing a mechanism for
specifying firmware to use by the instance. This allows user space to
load and boot use case specific firmware on remote processors.
- new drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as
removal of the unused StE modem loader.
- finally support for crash recovery in the Qualcomm Wirelss subsystem
(used for WiFi/BT/FM on a number of platforms) and a number of bug
fixes and cleanups
* tag 'rproc-v4.10' of git://github.com/andersson/remoteproc: (49 commits)
remoteproc: qcom_adsp_pil: select qcom_scm
remoteproc: Drop wait in __rproc_boot()
remoteproc/ste: Delete unused driver
remoteproc: Remove "experimental" warning
remoteproc: qcom_adsp_pil: select qcom_scm
dt-binding: soc: qcom: smd: Add label property
remoteproc: qcom: mdt_loader: add include for sizes
remoteproc: Update last rproc_put users to rproc_free
remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLE
remoteproc: wcnss-pil: add QCOM_SMD dependency
dmaengine: st_fdma: Revert: "Revert: Update st_fdma to 'depends on REMOTEPROC'"
remoteproc: Add support for xo clock
remoteproc: adsp-pil: fix recursive dependency
remoteproc: Introduce Qualcomm ADSP PIL
dt-binding: remoteproc: Introduce ADSP loader binding
remoteproc: qcom_wcnss: Fix circular module dependency
remoteproc: Merge table_ptr and cached_table pointers
remoteproc: Remove custom vdev handler list
remoteproc: Update max_notifyid as we allocate vrings
remoteproc: Decouple vdev resources and devices
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=4k30
-----END PGP SIGNATURE-----
Merge tag 'leds_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
- userspace LED class driver - it can be useful for testing triggers
and can also be used to implement virtual LEDs
- LED class driver for NIC78bx device
- LED core fixes for preventing potential races while setting
brightness when software blinking is enabled
- improvements in LED documentation to mention semantics on changing
brightness while trigger is active
* tag 'leds_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: pca955x: Add ACPI support
leds: netxbig: fix module autoload for OF registration
leds: pca963x: Add ACPI support
leds: leds-cobalt-raq: use builtin_platform_driver
led: core: Fix blink_brightness setting race
led: core: Use atomic bit-field for the blink-flags
leds: Add user LED driver for NIC78bx device
leds: verify vendor and change license in mlxcpld driver
leds: pca963x: enable low-power state
leds: pca9532: Use default trigger value from platform data
leds: pca963x: workaround group blink scaling issue
cleanup LED documentation and make it match reality
leds: lp3952: Export I2C module alias information for module autoload
leds: mc13783: Fix MC13892 keypad led access
ledtrig-cpu.c: fix english
leds/leds-lp5523.txt: make documentation match reality
tools/leds: Add uledmon program for monitoring userspace LEDs
leds: Use macro for max device node name size
leds: Introduce userspace LED class driver
mfd: qcom-pm8xxx: Clean up PM8XXX namespace
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SQob
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/defconfig-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Enable support for MUSB based USB OTG on DA850.
* tag 'davinci-for-v4.10/defconfig-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable da8xx usb otg
Signed-off-by: Olof Johansson <olof@lixom.net>
The musb driver is enabled but the phy and the glue
for the da8xx are not enabled.
Enable them.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
