AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 02:45:26 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
634,502 Commits 1 Branch 0 Tags 2 GiB
a82f50668b
Commit Graph

425 Commits

Author SHA1 Message Date
Linus Torvalds
133d970e0d Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 
Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...
 2016-10-15 09:26:12 -07:00
Chris Metcalf
6727ad9e20 nmi_backtrace: generate one-line reports for idle cpus 
When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative.  Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".

We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.

This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.

Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm]
Tested-by: Petr Mladek <pmladek@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2016-10-07 18:46:30 -07:00
Matt Redfearn
72bc8c75ea cpuidle: cpuidle-cps: Enable use with MIPSr6 CPUs. 
This patch enables the MIPS CPS driver for MIPSr6 CPUs.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-mips@linux-mips.org
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14228/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 2016-10-04 16:13:57 +02:00
Linus Torvalds
597f03f9d1 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull CPU hotplug updates from Thomas Gleixner:
 "Yet another batch of cpu hotplug core updates and conversions:

   - Provide core infrastructure for multi instance drivers so the
     drivers do not have to keep custom lists.

   - Convert custom lists to the new infrastructure. The block-mq custom
     list conversion comes through the block tree and makes the diffstat
     tip over to more lines removed than added.

   - Handle unbalanced hotplug enable/disable calls more gracefully.

   - Remove the obsolete CPU_STARTING/DYING notifier support.

   - Convert another batch of notifier users.

   The relayfs changes which conflicted with the conversion have been
   shipped to me by Andrew.

   The remaining lot is targeted for 4.10 so that we finally can remove
   the rest of the notifiers"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  cpufreq: Fix up conversion to hotplug state machine
  blk/mq: Reserve hotplug states for block multiqueue
  x86/apic/uv: Convert to hotplug state machine
  s390/mm/pfault: Convert to hotplug state machine
  mips/loongson/smp: Convert to hotplug state machine
  mips/octeon/smp: Convert to hotplug state machine
  fault-injection/cpu: Convert to hotplug state machine
  padata: Convert to hotplug state machine
  cpufreq: Convert to hotplug state machine
  ACPI/processor: Convert to hotplug state machine
  virtio scsi: Convert to hotplug state machine
  oprofile/timer: Convert to hotplug state machine
  block/softirq: Convert to hotplug state machine
  lib/irq_poll: Convert to hotplug state machine
  x86/microcode: Convert to hotplug state machine
  sh/SH-X3 SMP: Convert to hotplug state machine
  ia64/mca: Convert to hotplug state machine
  ARM/OMAP/wakeupgen: Convert to hotplug state machine
  ARM/shmobile: Convert to hotplug state machine
  arm64/FP/SIMD: Convert to hotplug state machine
  ...
 2016-10-03 19:43:08 -07:00
Rafael J. Wysocki
e35db92b4f Merge branches 'pm-cpuidle', 'pm-opp' and 'pm-avs' 
* pm-cpuidle:
  ARM: cpuidle: Fix error return code

* pm-opp:
  PM / OPP: Don't support OPP if it provides supported-hw but platform does not
  PM / OPP: avoid maybe-uninitialized warning

* pm-avs:
  PM / AVS: SmartReflex: Neaten logging
 2016-10-02 01:43:16 +02:00
Sebastian Andrzej Siewior
dfc616d8b3 cpuidle/coupled: Convert to hotplug state machine 
Install the callbacks via the state machine.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-pm@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160824091444.brdr5zpbxjvh6n3f@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
 2016-09-06 18:30:24 +02:00
Sebastian Andrzej Siewior
10fcca9d87 cpuidle/powernv: Convert to hotplug state machine 
Install the callbacks via the state machine.

v1…v2: - Use only CPUHP_CPUIDLE_DEAD (requested by Daniel Lezcano)

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-pm@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160824091259.ozyslcopxvbfdqzy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
 2016-09-06 18:30:24 +02:00
Sebastian Andrzej Siewior
529351fd3c cpuidle/pseries: Convert to hotplug state machine 
Install the callbacks via the state machine.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-pm@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160818125731.27256-11-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
 2016-09-06 18:30:24 +02:00
Christophe Jaillet
af48d7bc37 ARM: cpuidle: Fix error return code 
We know that 'ret = 0' because it has been tested a few lines above.
So, if 'kzalloc' fails, 0 will be returned instead of an error code.
Return -ENOMEM instead.

Fixes: a0d46a3dfd ("ARM: cpuidle: Register per cpuidle device")
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-08-12 02:33:14 +02:00
Linus Torvalds
bad60e6f25 powerpc updates for 4.8 # 1 
Highlights:
  - PowerNV PCI hotplug support.
  - Lots more Power9 support.
  - eBPF JIT support on ppc64le.
  - Lots of cxl updates.
  - Boot code consolidation.
 
 Bug fixes:
  - Fix spin_unlock_wait() from Boqun Feng
  - Fix stack pointer corruption in __tm_recheckpoint() from Michael Neuling
  - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
  - mm: Ensure "special" zones are empty from Oliver O'Halloran
  - ftrace: Separate the heuristics for checking call sites from Michael Ellerman
  - modules: Never restore r2 for a mprofile-kernel style mcount() call from Michael Ellerman
  - Fix endianness when reading TCEs from Alexey Kardashevskiy
  - start rtasd before PCI probing from Greg Kurz
  - PCI: rpaphp: Fix slot registration for multiple slots under a PHB from Tyrel Datwyler
  - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev Bhattiprolu
 
 Cleanups & fixes:
  - Drop support for MPIC in pseries from Rashmica Gupta
  - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
  - Remove unused symbols in asm-offsets.c from Rashmica Gupta
  - Fix SRIOV not building without EEH enabled from Russell Currey
  - Remove kretprobe_trampoline_holder. from Thiago Jung Bauermann
  - Reduce log level of PCI I/O space warning from Benjamin Herrenschmidt
  - Add array bounds checking to crash_shutdown_handlers from Suraj Jitindar Singh
  - Avoid -maltivec when using clang integrated assembler from Anton Blanchard
  - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
  - Fix error return value in cmm_mem_going_offline() from Rasmus Villemoes
  - export cpu_to_core_id() from Mauricio Faria de Oliveira
  - Remove old symbols from defconfigs from Andrew Donnellan
  - Update obsolete comments in setup_32.c about entry conditions from Benjamin Herrenschmidt
  - Add comment explaining the purpose of setup_kdump_trampoline() from Benjamin Herrenschmidt
  - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin Hao
  - Remove RELOCATABLE_PPC32 from Kevin Hao
  - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh
 
 Minor cleanups & fixes:
  - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
    Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King, Geliang
    Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman, Michael Ellerman,
    Stephen Rothwell, Stewart Smith.
 
 Freescale updates from Scott:
  - "Highlights include more 8xx optimizations, device tree updates,
    and MVME7100 support."
 
 PowerNV PCI hotplug from Gavin Shan:
  - PCI: Add pcibios_setup_bridge()
  - Override pcibios_setup_bridge()
  - Remove PCI_RESET_DELAY_US
  - Move pnv_pci_ioda_setup_opal_tce_kill() around
  - Increase PE# capacity
  - Allocate PE# in reverse order
  - Create PEs in pcibios_setup_bridge()
  - Setup PE for root bus
  - Extend PCI bridge resources
  - Make pnv_ioda_deconfigure_pe() visible
  - Dynamically release PE
  - Update bridge windows on PCI plug
  - Delay populating pdn
  - Support PCI slot ID
  - Use PCI slot reset infrastructure
  - Introduce pnv_pci_get_slot_id()
  - Functions to get/set PCI slot state
  - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
  - Print correct PHB type names
 
 Power9 idle support from Shreyas B. Prabhu:
  - set power_save func after the idle states are initialized
  - Use PNV_THREAD_WINKLE macro while requesting for winkle
  - make hypervisor state restore a function
  - Rename idle_power7.S to idle_book3s.S
  - Rename reusable idle functions to hardware agnostic names
  - Make pnv_powersave_common more generic
  - abstraction for saving SPRs before entering deep idle states
  - Add platform support for stop instruction
  - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
  - cpuidle/powernv: cleanup cpuidle-powernv.c
  - cpuidle/powernv: Add support for POWER ISA v3 idle states
  - Use deepest stop state when cpu is offlined
 
 Power9 PMU from Madhavan Srinivasan:
  - factor out power8 pmu macros and defines
  - factor out power8 pmu functions
  - factor out power8 __init_pmu code
  - Add power9 event list macros for generic and cache events
  - Power9 PMU support
  - Export Power9 generic and cache events to sysfs
 
 Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
  - Add XICS emulation APIs
  - Move a few exception common handlers to make room
  - Add support for HV virtualization interrupts
  - Add mechanism to force a replay of interrupts
  - Add ICP OPAL backend
  - Discover IODA3 PHBs
  - pci: Remove obsolete SW invalidate
  - opal: Add real mode call wrappers
  - Rename TCE invalidation calls
  - Remove SWINV constants and obsolete TCE code
  - Rework accessing the TCE invalidate register
  - Fallback to OPAL for TCE invalidations
  - Use the device-tree to get available range of M64's
  - Check status of a PHB before using it
  - pci: Don't try to allocate resources that will be reassigned
 
 Other Power9:
  - Send SIGBUS on unaligned copy and paste from Chris Smart
  - Large Decrementer support from Oliver O'Halloran
  - Load Monitor Register Support from Jack Miller
 
 Performance improvements from Anton Blanchard:
  - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
  - Avoid load hit store in setup_sigcontext()
  - Remove assembly versions of strcpy, strcat, strlen and strcmp
  - Align hot loops of some string functions
 
 eBPF JIT from Naveen N. Rao:
  - Fix/enhance 32-bit Load Immediate implementation
  - Optimize 64-bit Immediate loads
  - Introduce rotate immediate instructions
  - A few cleanups
  - Isolate classic BPF JIT specifics into a separate header
  - Implement JIT compiler for extended BPF
 
 Operator Panel driver from Suraj Jitindar Singh:
  - devicetree/bindings: Add binding for operator panel on FSP machines
  - Add inline function to get rc from an ASYNC_COMP opal_msg
  - Add driver for operator panel on FSP machines
 
 Sparse fixes from Daniel Axtens:
  - make some things static
  - Introduce asm-prototypes.h
  - Include headers containing prototypes
  - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
  - kvm: Clarify __user annotations
  - Pass endianness to sparse
  - Make ppc_md.{halt, restart} __noreturn
 
 MM fixes & cleanups from Aneesh Kumar K.V:
  - radix: Update LPCR HR bit as per ISA
  - use _raw variant of page table accessors
  - Compile out radix related functions if RADIX_MMU is disabled
  - Clear top 16 bits of va only on older cpus
  - Print formation regarding the the MMU mode
  - hash: Update SDR1 size encoding as documented in ISA 3.0
  - radix: Update PID switch sequence
  - radix: Update machine call back to support new HCALL.
  - radix: Add LPID based tlb flush helpers
  - radix: Add a kernel command line to disable radix
  - Cleanup LPCR defines
 
 Boot code consolidation from Benjamin Herrenschmidt:
  - Move epapr_paravirt_early_init() to early_init_devtree()
  - cell: Don't use flat device-tree after boot
  - ge_imp3a: Don't use the flat device-tree after boot
  - mpc85xx_ds: Don't use the flat device-tree after boot
  - mpc85xx_rdb: Don't use the flat device-tree after boot
  - Don't test for machine type in rtas_initialize()
  - Don't test for machine type in smp_setup_cpu_maps()
  - dt: Add of_device_compatible_match()
  - Factor do_feature_fixup calls
  - Move 64-bit feature fixup earlier
  - Move 64-bit memory reserves to setup_arch()
  - Use a cachable DART
  - Move FW feature probing out of pseries probe()
  - Put exception configuration in a common place
  - Remove early allocation of the SMU command buffer
  - Move MMU backend selection out of platform code
  - pasemi: Remove IOBMAP allocation from platform probe()
  - mm/hash: Don't use machine_is() early during boot
  - Don't test for machine type to detect HEA special case
  - pmac: Remove spurrious machine type test
  - Move hash table ops to a separate structure
  - Ensure that ppc_md is empty before probing for machine type
  - Move 64-bit probe_machine() to later in the boot process
  - Move 32-bit probe() machine to later in the boot process
  - Get rid of ppc_md.init_early()
  - Move the boot time info banner to a separate function
  - Move setting of {i,d}cache_bsize to initialize_cache_info()
  - Move the content of setup_system() to setup_arch()
  - Move cache info inits to a separate function
  - Re-order the call to smp_setup_cpu_maps()
  - Re-order setup_panic()
  - Make a few boot functions __init
  - Merge 32-bit and 64-bit setup_arch()
 
 Other new features:
  - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
  - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
  - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
  - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
  - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
  - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
  - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
  - Add a parameter to disable 1TB segs from Oliver O'Halloran
  - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
  - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
  - pseries: Add pseries hotplug workqueue from John Allen
  - pseries: Add support for hotplug interrupt source from John Allen
  - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
  - pseries: Move property cloning into its own routine from Nathan Fontenot
  - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
  - pseries: Auto-online hotplugged memory from Nathan Fontenot
  - pseries: Remove call to memblock_add() from Nathan Fontenot
 
 cxl:
  - Add set and get private data to context struct from Michael Neuling
  - make base more explicitly non-modular from Paul Gortmaker
  - Use for_each_compatible_node() macro from Wei Yongjun
  - Frederic Barrat
    - Abstract the differences between the PSL and XSL
    - Make vPHB device node match adapter's
  - Philippe Bergheaud
    - Add mechanism for delivering AFU driver specific events
    - Ignore CAPI adapters misplaced in switched slots
    - Refine slice error debug messages
  - Andrew Donnellan
    - static-ify variables to fix sparse warnings
    - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
    - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
    - Add cxl_check_and_switch_mode() API to switch bi-modal cards
    - remove dead Kconfig options
    - fix potential NULL dereference in free_adapter()
  - Ian Munsie
    - Update process element after allocating interrupts
    - Add support for CAPP DMA mode
    - Fix allowing bogus AFU descriptors with 0 maximum processes
    - Fix allocating a minimum of 2 pages for the SPA
    - Fix bug where AFU disable operation had no effect
    - Workaround XSL bug that does not clear the RA bit after a reset
    - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
    - powerpc/powernv: Split cxl code out into a separate file
    - Add cxl_slot_is_supported API
    - Enable bus mastering for devices using CAPP DMA mode
    - Move cxl_afu_get / cxl_afu_put to base
    - Allow a default context to be associated with an external pci_dev
    - Do not create vPHB if there are no AFU configuration records
    - powerpc/powernv: Add support for the cxl kernel api on the real phb
    - Add support for using the kernel API with a real PHB
    - Add kernel APIs to get & set the max irqs per context
    - Add preliminary workaround for CX4 interrupt limitation
    - Add support for interrupts on the Mellanox CX4
    - Workaround PE=0 hardware limitation in Mellanox CX4
    - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n
 
 selftests:
  - Test unaligned copy and paste from Chris Smart
  - Load Monitor Register Tests from Jack Miller
  - Cyril Bur
    - exec() with suspended transaction
    - Use signed long to read perf_event_paranoid
    - Fix usage message in context_switch
    - Fix generation of vector instructions/types in context_switch
  - Michael Ellerman
    - Use "Delta" rather than "Error" in normal output
    - Import Anton's mmap & futex micro benchmarks
    - Add a test for PROT_SAO
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnWchAAoJEFHr6jzI4aWAe64P/36Vd9yJLptjkoyZp8/IQtu1
 Cv8buQwGdKuSMzdkcUAOXcC3fe2u70ZWXMKKLfY3koIV1IAiqdWk5/XWRKMP2XmE
 dG0LhSf0uu7uh+mE0WvQnRu46ImeKtQ+mPp4Hbs/s9SxMSeYjruv3vdWWmgUq0cl
 Gac2qJSRtAMmgLuHWMjf7N5mxOTOnKejU4o2i9cJ+YHmWKOdCigv2Ge1UadOQFlC
 E7tRPiUR3asfDfj+e+LVTTdToH6p8pk+mOUzIoZ8jIkQ+IXzi62UDl5+Rw9mqiuX
 1CtqEMUXxo2qwX+d4TcV/QUOp0YKPuIcUZ9NMMS+S3lOyJ4NFt+j2Izk7QJp5kNP
 gKVqB68TjDQsBuDr3P9ynlHbduxTIhZAqopbTrLe0FIg48nUe4n1yHJBVzqaVajX
 rFBJSsSUffBLAARNPSXJJhIgc2C1/qOC8dgMeDMcR2kPirDHaQZ/lY1yEpq1yiqR
 q6e3v5hvIAm4IjbYk0mF7TUxBrPGVE/ExyBINyASRoYxAJ1PyeD/iljZ9vI3asRA
 s+hhxT8H3f7lnqTrmJqMjHgAdGkmag07EdmvFNX4xK4aADSy7Y6g4dw25ffRopo9
 p9Jf9HX+dZv65Y3UjbV/6HuXcaSEBJJLSVWvii65PebqSN0LuHEFvNeIJ6Iblx0B
 AWh/hd0Iin2gdkcG39Mr
 =Z5kM
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - PowerNV PCI hotplug support.
   - Lots more Power9 support.
   - eBPF JIT support on ppc64le.
   - Lots of cxl updates.
   - Boot code consolidation.

  Bug fixes:
   - Fix spin_unlock_wait() from Boqun Feng
   - Fix stack pointer corruption in __tm_recheckpoint() from Michael
     Neuling
   - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
   - mm: Ensure "special" zones are empty from Oliver O'Halloran
   - ftrace: Separate the heuristics for checking call sites from
     Michael Ellerman
   - modules: Never restore r2 for a mprofile-kernel style mcount() call
     from Michael Ellerman
   - Fix endianness when reading TCEs from Alexey Kardashevskiy
   - start rtasd before PCI probing from Greg Kurz
   - PCI: rpaphp: Fix slot registration for multiple slots under a PHB
     from Tyrel Datwyler
   - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev
     Bhattiprolu

  Cleanups & fixes:
   - Drop support for MPIC in pseries from Rashmica Gupta
   - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
   - Remove unused symbols in asm-offsets.c from Rashmica Gupta
   - Fix SRIOV not building without EEH enabled from Russell Currey
   - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann
   - Reduce log level of PCI I/O space warning from Benjamin
     Herrenschmidt
   - Add array bounds checking to crash_shutdown_handlers from Suraj
     Jitindar Singh
   - Avoid -maltivec when using clang integrated assembler from Anton
     Blanchard
   - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
   - Fix error return value in cmm_mem_going_offline() from Rasmus
     Villemoes
   - export cpu_to_core_id() from Mauricio Faria de Oliveira
   - Remove old symbols from defconfigs from Andrew Donnellan
   - Update obsolete comments in setup_32.c about entry conditions from
     Benjamin Herrenschmidt
   - Add comment explaining the purpose of setup_kdump_trampoline() from
     Benjamin Herrenschmidt
   - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin
     Hao
   - Remove RELOCATABLE_PPC32 from Kevin Hao
   - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh

  Minor cleanups & fixes:
   - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
     Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King,
     Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman,
     Michael Ellerman, Stephen Rothwell, Stewart Smith.

  Freescale updates from Scott:
   - "Highlights include more 8xx optimizations, device tree updates,
     and MVME7100 support."

  PowerNV PCI hotplug from Gavin Shan:
   - PCI: Add pcibios_setup_bridge()
   - Override pcibios_setup_bridge()
   - Remove PCI_RESET_DELAY_US
   - Move pnv_pci_ioda_setup_opal_tce_kill() around
   - Increase PE# capacity
   - Allocate PE# in reverse order
   - Create PEs in pcibios_setup_bridge()
   - Setup PE for root bus
   - Extend PCI bridge resources
   - Make pnv_ioda_deconfigure_pe() visible
   - Dynamically release PE
   - Update bridge windows on PCI plug
   - Delay populating pdn
   - Support PCI slot ID
   - Use PCI slot reset infrastructure
   - Introduce pnv_pci_get_slot_id()
   - Functions to get/set PCI slot state
   - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
   - Print correct PHB type names

  Power9 idle support from Shreyas B. Prabhu:
   - set power_save func after the idle states are initialized
   - Use PNV_THREAD_WINKLE macro while requesting for winkle
   - make hypervisor state restore a function
   - Rename idle_power7.S to idle_book3s.S
   - Rename reusable idle functions to hardware agnostic names
   - Make pnv_powersave_common more generic
   - abstraction for saving SPRs before entering deep idle states
   - Add platform support for stop instruction
   - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
   - cpuidle/powernv: cleanup cpuidle-powernv.c
   - cpuidle/powernv: Add support for POWER ISA v3 idle states
   - Use deepest stop state when cpu is offlined

  Power9 PMU from Madhavan Srinivasan:
   - factor out power8 pmu macros and defines
   - factor out power8 pmu functions
   - factor out power8 __init_pmu code
   - Add power9 event list macros for generic and cache events
   - Power9 PMU support
   - Export Power9 generic and cache events to sysfs

  Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
   - Add XICS emulation APIs
   - Move a few exception common handlers to make room
   - Add support for HV virtualization interrupts
   - Add mechanism to force a replay of interrupts
   - Add ICP OPAL backend
   - Discover IODA3 PHBs
   - pci: Remove obsolete SW invalidate
   - opal: Add real mode call wrappers
   - Rename TCE invalidation calls
   - Remove SWINV constants and obsolete TCE code
   - Rework accessing the TCE invalidate register
   - Fallback to OPAL for TCE invalidations
   - Use the device-tree to get available range of M64's
   - Check status of a PHB before using it
   - pci: Don't try to allocate resources that will be reassigned

  Other Power9:
   - Send SIGBUS on unaligned copy and paste from Chris Smart
   - Large Decrementer support from Oliver O'Halloran
   - Load Monitor Register Support from Jack Miller

  Performance improvements from Anton Blanchard:
   - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
   - Avoid load hit store in setup_sigcontext()
   - Remove assembly versions of strcpy, strcat, strlen and strcmp
   - Align hot loops of some string functions

  eBPF JIT from Naveen N. Rao:
   - Fix/enhance 32-bit Load Immediate implementation
   - Optimize 64-bit Immediate loads
   - Introduce rotate immediate instructions
   - A few cleanups
   - Isolate classic BPF JIT specifics into a separate header
   - Implement JIT compiler for extended BPF

  Operator Panel driver from Suraj Jitindar Singh:
   - devicetree/bindings: Add binding for operator panel on FSP machines
   - Add inline function to get rc from an ASYNC_COMP opal_msg
   - Add driver for operator panel on FSP machines

  Sparse fixes from Daniel Axtens:
   - make some things static
   - Introduce asm-prototypes.h
   - Include headers containing prototypes
   - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
   - kvm: Clarify __user annotations
   - Pass endianness to sparse
   - Make ppc_md.{halt, restart} __noreturn

  MM fixes & cleanups from Aneesh Kumar K.V:
   - radix: Update LPCR HR bit as per ISA
   - use _raw variant of page table accessors
   - Compile out radix related functions if RADIX_MMU is disabled
   - Clear top 16 bits of va only on older cpus
   - Print formation regarding the the MMU mode
   - hash: Update SDR1 size encoding as documented in ISA 3.0
   - radix: Update PID switch sequence
   - radix: Update machine call back to support new HCALL.
   - radix: Add LPID based tlb flush helpers
   - radix: Add a kernel command line to disable radix
   - Cleanup LPCR defines

  Boot code consolidation from Benjamin Herrenschmidt:
   - Move epapr_paravirt_early_init() to early_init_devtree()
   - cell: Don't use flat device-tree after boot
   - ge_imp3a: Don't use the flat device-tree after boot
   - mpc85xx_ds: Don't use the flat device-tree after boot
   - mpc85xx_rdb: Don't use the flat device-tree after boot
   - Don't test for machine type in rtas_initialize()
   - Don't test for machine type in smp_setup_cpu_maps()
   - dt: Add of_device_compatible_match()
   - Factor do_feature_fixup calls
   - Move 64-bit feature fixup earlier
   - Move 64-bit memory reserves to setup_arch()
   - Use a cachable DART
   - Move FW feature probing out of pseries probe()
   - Put exception configuration in a common place
   - Remove early allocation of the SMU command buffer
   - Move MMU backend selection out of platform code
   - pasemi: Remove IOBMAP allocation from platform probe()
   - mm/hash: Don't use machine_is() early during boot
   - Don't test for machine type to detect HEA special case
   - pmac: Remove spurrious machine type test
   - Move hash table ops to a separate structure
   - Ensure that ppc_md is empty before probing for machine type
   - Move 64-bit probe_machine() to later in the boot process
   - Move 32-bit probe() machine to later in the boot process
   - Get rid of ppc_md.init_early()
   - Move the boot time info banner to a separate function
   - Move setting of {i,d}cache_bsize to initialize_cache_info()
   - Move the content of setup_system() to setup_arch()
   - Move cache info inits to a separate function
   - Re-order the call to smp_setup_cpu_maps()
   - Re-order setup_panic()
   - Make a few boot functions __init
   - Merge 32-bit and 64-bit setup_arch()

  Other new features:
   - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
   - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
   - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
   - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
   - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
   - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
   - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
   - Add a parameter to disable 1TB segs from Oliver O'Halloran
   - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
   - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
   - pseries: Add pseries hotplug workqueue from John Allen
   - pseries: Add support for hotplug interrupt source from John Allen
   - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
   - pseries: Move property cloning into its own routine from Nathan Fontenot
   - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
   - pseries: Auto-online hotplugged memory from Nathan Fontenot
   - pseries: Remove call to memblock_add() from Nathan Fontenot

  cxl:
   - Add set and get private data to context struct from Michael Neuling
   - make base more explicitly non-modular from Paul Gortmaker
   - Use for_each_compatible_node() macro from Wei Yongjun
   - Frederic Barrat
   - Abstract the differences between the PSL and XSL
   - Make vPHB device node match adapter's
   - Philippe Bergheaud
   - Add mechanism for delivering AFU driver specific events
   - Ignore CAPI adapters misplaced in switched slots
   - Refine slice error debug messages
   - Andrew Donnellan
   - static-ify variables to fix sparse warnings
   - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
   - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
   - Add cxl_check_and_switch_mode() API to switch bi-modal cards
   - remove dead Kconfig options
   - fix potential NULL dereference in free_adapter()
   - Ian Munsie
   - Update process element after allocating interrupts
   - Add support for CAPP DMA mode
   - Fix allowing bogus AFU descriptors with 0 maximum processes
   - Fix allocating a minimum of 2 pages for the SPA
   - Fix bug where AFU disable operation had no effect
   - Workaround XSL bug that does not clear the RA bit after a reset
   - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
   - powerpc/powernv: Split cxl code out into a separate file
   - Add cxl_slot_is_supported API
   - Enable bus mastering for devices using CAPP DMA mode
   - Move cxl_afu_get / cxl_afu_put to base
   - Allow a default context to be associated with an external pci_dev
   - Do not create vPHB if there are no AFU configuration records
   - powerpc/powernv: Add support for the cxl kernel api on the real phb
   - Add support for using the kernel API with a real PHB
   - Add kernel APIs to get & set the max irqs per context
   - Add preliminary workaround for CX4 interrupt limitation
   - Add support for interrupts on the Mellanox CX4
   - Workaround PE=0 hardware limitation in Mellanox CX4
   - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n

  selftests:
   - Test unaligned copy and paste from Chris Smart
   - Load Monitor Register Tests from Jack Miller
   - Cyril Bur
   - exec() with suspended transaction
   - Use signed long to read perf_event_paranoid
   - Fix usage message in context_switch
   - Fix generation of vector instructions/types in context_switch
   - Michael Ellerman
   - Use "Delta" rather than "Error" in normal output
   - Import Anton's mmap & futex micro benchmarks
   - Add a test for PROT_SAO"

* tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits)
  powerpc/mm: Parenthesise IS_ENABLED() in if condition
  tty/hvc: Use opal irqchip interface if available
  tty/hvc: Use IRQF_SHARED for OPAL hvc consoles
  selftests/powerpc: exec() with suspended transaction
  powerpc: Improve comment explaining why we modify VRSAVE
  powerpc/mm: Drop unused externs for hpte_init_beat[_v3]()
  powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header
  powerpc/mm: Fix build break when PPC_NATIVE=n
  crypto: vmx - Convert to CPU feature based module autoloading
  powerpc: Add module autoloading based on CPU features
  powerpc/powernv/ioda: Fix endianness when reading TCEs
  powerpc/mm: Add memory barrier in __hugepte_alloc()
  powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call
  powerpc/ftrace: Separate the heuristics for checking call sites
  powerpc: Merge 32-bit and 64-bit setup_arch()
  powerpc/64: Make a few boot functions __init
  powerpc: Re-order setup_panic()
  powerpc: Re-order the call to smp_setup_cpu_maps()
  powerpc/32: Move cache info inits to a separate function
  powerpc/64: Move the content of setup_system() to setup_arch()
  ...
 2016-07-30 21:01:36 -07:00
Sudeep Holla
220276e09b cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} 
The function arm_enter_idle_state is exactly the same in both generic
ARM{32,64} CPUIdle driver and will be the same even on ARM64 backend
for ACPI processor idle driver. So we can unify it and move it to a
common place by introducing CPU_PM_CPU_IDLE_ENTER macro that can be
used in all places avoiding duplication.

This is in preparation of reuse of the generic cpuidle entry function
for ACPI LPI support on ARM64.

Suggested-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-07-21 23:29:38 +02:00
Shreyas B. Prabhu
3005c597ba cpuidle/powernv: Add support for POWER ISA v3 idle states 
POWER ISA v3 defines a new idle processor core mechanism. In summary,
 a) new instruction named stop is added.
 b) new per thread SPR named PSSCR is added which controls the behavior
	of stop instruction.

Supported idle states and value to be written to PSSCR register to enter
any idle state is exposed via ibm,cpu-idle-state-names and
ibm,cpu-idle-state-psscr respectively. To enter an idle state,
platform provided power_stop() needs to be invoked with the appropriate
PSSCR value.

This patch adds support for this new mechanism in cpuidle powernv driver.

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Cc: linux-pm@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
 2016-07-15 20:18:42 +10:00
Shreyas B. Prabhu
957efcedee cpuidle/powernv: cleanup cpuidle-powernv.c 
- Use stack instead of kzalloc'ed memory for variables while probing
   device tree for idle states.
 - Set cap for number of idle states that can be added to
   cpuidle_state_table
 - Minor change in way we check of_property_read_u32_array for error
   for sake of consistency
 - Drop unnecessary "&" while assigning function pointer

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
 2016-07-15 20:18:42 +10:00
Shreyas B. Prabhu
169f3fae0c cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES 
Use cpuidle's CPUIDLE_STATE_MAX macro instead of powernv specific
MAX_POWERNV_IDLE_STATES.

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
 2016-07-15 20:18:41 +10:00
Shreyas B. Prabhu
dbd1b8ea43 cpuidle: Fix last_residency division 
Snooze is a poll idle state in powernv and pseries platforms. Snooze
has a timeout so that if a CPU stays in snooze for more than target
residency of the next available idle state, then it would exit
thereby giving chance to the cpuidle governor to re-evaluate and
promote the CPU to a deeper idle state. Therefore whenever snooze
exits due to this timeout, its last_residency will be target_residency
of the next deeper state.

Commit e93e59ce5b "cpuidle: Replace ktime_get() with local_clock()"
changed the math around last_residency calculation. Specifically,
while converting last_residency value from nano- to microseconds, it
carries out right shift by 10. Because of that, in snooze timeout
exit scenarios last_residency calculated is roughly 2.3% less than
target_residency of the next available state. This pattern is picked
up by get_typical_interval() in the menu governor and therefore
expected_interval in menu_select() is frequently less than the
target_residency of any state other than snooze.

Due to this we are entering snooze at a higher rate, thereby
affecting the single thread performance.

Fix this by using more precise division via ktime_us_delta().

Fixes: e93e59ce5b "cpuidle: Replace ktime_get() with local_clock()"
Reported-by: Anton Blanchard <anton@samba.org>
Bisected-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-07-04 14:17:34 +02:00
Daniel Lezcano
e7387da520 cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter() 
Commit 0b89e9aa28 (cpuidle: delay enabling interrupts until all
coupled CPUs leave idle) rightfully fixed a regression by letting
the coupled idle state framework to handle local interrupt enabling
when the CPU is exiting an idle state.

The current code checks if the idle state is coupled and, if so, it
will let the coupled code to enable interrupts. This way, it can
decrement the ready-count before handling the interrupt. This
mechanism prevents the other CPUs from waiting for a CPU which is
handling interrupts.

But the check is done against the state index returned by the back
end driver's ->enter functions which could be different from the
initial index passed as parameter to the cpuidle_enter_state()
function.

 entered_state = target_state->enter(dev, drv, index);

 [ ... ]

 if (!cpuidle_state_is_coupled(drv, entered_state))
	local_irq_enable();

 [ ... ]

If the 'index' is referring to a coupled idle state but the
'entered_state' is *not* coupled, then the interrupts are enabled
again. All CPUs blocked on the sync barrier may busy loop longer
if the CPU has interrupts to handle before decrementing the
ready-count. That's consuming more energy than saving.

Fixes: 0b89e9aa28 (cpuidle: delay enabling interrupts until all coupled CPUs leave idle)
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-05-18 02:48:37 +02:00
Rafael J. Wysocki
fd7c3c29f9 Merge back new cpuidle material for v4.7. 2016-05-06 22:08:46 +02:00
James Morse
625fe4f8ff ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value 
arm_cpuidle_suspend() may return -EOPNOTSUPP, or any value returned
by the cpu_ops/cpuidle_ops suspend call. arm_enter_idle_state() doesn't
update 'ret' with this value, meaning we always signal success to
cpuidle_enter_state(), causing it to update the usage counters as if we
succeeded.

Fixes: 191de17aa3 ("ARM64: cpuidle: Replace cpu_suspend by the common ARM/ARM64 function")
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-04-28 15:15:14 +02:00
Daniel Lezcano
e93e59ce5b cpuidle: Replace ktime_get() with local_clock() 
The ktime_get() can have a non negligeable overhead, use local_clock()
instead.

In order to test the difference between ktime_get() and local_clock(),
a quick hack has been added to trigger, via debugfs, 10000 times a
call to ktime_get() and local_clock() and measure the elapsed time.

Then the average value, the min and max is computed for each call.

From userspace, the test above was called 100 times every 2 seconds.

So, ktime_get() and local_clock() have been called 1000000 times in
total.

The results are:

ktime_get():
============
 * average: 101 ns (stddev: 27.4)
 * maximum: 38313 ns
 * minimum: 65 ns

local_clock():
==============
 * average: 60 ns (stddev: 9.8)
 * maximum: 13487 ns
 * minimum: 46 ns

The local_clock() is faster and more stable.

Even if it is a drop in the ocean, changing the ktime_get() by the
local_clock() allows to save 80ns at idle time (entry + exit). And
in some circumstances, especially when there are several CPUs racing
for the clock access, we save tens of microseconds.

The idle duration resulting from a diff is converted from nanosec to
microsec. This could be done with integer division (div 1000) - which is
an expensive operation or by 10 bits shifting (div 1024) - which is fast
but unprecise.

The following table gives some results at the limits.

 ------------------------------------------
|   nsec   |   div(1000)   |   div(1024)   |
 ------------------------------------------
|   1e3    |        1 usec |      976 nsec |
 ------------------------------------------
|   1e6    |     1000 usec |      976 usec |
 ------------------------------------------
|   1e9    |  1000000 usec |   976562 usec |
 ------------------------------------------

There is a linear deviation of 2.34%. This loss of precision is acceptable
in the context of the resulting diff which is used for statistics. These
ones are processed to guess estimate an approximation of the duration of the
next idle period which ends up into an idle state selection. The selection
criteria takes into account the next duration based on large intervals,
represented by the idle state's target residency.

The 2^10 division is enough because the approximation regarding the 1e3
division is lost in all the approximations done for the next idle duration
computation.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-04-26 02:38:49 +02:00
Dave Gerlach
c998c07836 cpuidle: Indicate when a device has been unregistered 
Currently the 'registered' member of the cpuidle_device struct is set
to 1 during cpuidle_register_device. In this same function there are
checks to see if the device is already registered to prevent duplicate
calls to register the device, but this value is never set to 0 even on
unregister of the device. Because of this, any attempt to call
cpuidle_register_device after a call to cpuidle_unregister_device will
fail which shouldn't be the case.

To prevent this, set registered to 0 when the device is unregistered.

Fixes: c878a52d3c (cpuidle: Check if device is already registered)
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-04-09 02:14:39 +02:00
Rafael J. Wysocki
0c313cb207 cpuidle: menu: Fall back to polling if next timer event is near 
Commit a9ceb78bc7 (cpuidle,menu: use interactivity_req to disable
polling) changed the behavior of the fallback state selection part
of menu_select() so it looks at interactivity_req instead of
data->next_timer_us when it makes its decision.  That effectively
caused polling to be used more often as fallback idle which led to
significant increases of energy consumption in some cases.

Commit e132b9b3bc (cpuidle: menu: use high confidence factors
only when considering polling) changed that logic again to be more
predictable, but that didn't help with the increased energy
consumption problem.

For this reason, go back to making decisions on which state to fall
back to based on data->next_timer_us which is the time we know for
sure something will happen rather than a prediction (which may be
inaccurate and turns out to be so often enough to be problematic).
However, take the target residency of the first proper idle state
(C1) into account, so that state is not used as the fallback one
if its target residency is greater than data->next_timer_us.

Fixes: a9ceb78bc7 (cpuidle,menu: use interactivity_req to disable polling)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-and-tested-by: Doug Smythies <dsmythies@telus.net>
 2016-03-21 15:50:28 +01:00
Rik van Riel
e132b9b3bc cpuidle: menu: use high confidence factors only when considering polling 
The menu governor uses five different factors to pick the
idle state:
 - the user configured latency_req
 - the time until the next timer (next_timer_us)
 - the typical sleep interval, as measured recently
 - an estimate of sleep time by dividing next_timer_us by an observed factor
 - a load corrected version of the above, divided again by load

Only the first three items are known with enough confidence that
we can use them to consider polling, instead of an actual CPU
idle state, because the cost of being wrong about polling can be
excessive power use.

The latter two are used in the menu governor's main selection
loop, and can result in choosing a shallower idle state when
the system is expected to be busy again soon.

This pushes a busy system in the "performance" direction of
the performance<>power tradeoff, when choosing between idle
states, but stays more strictly on the "power" state when
deciding between polling and C1.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-03-17 02:40:32 +01:00
Rasmus Villemoes
3b99669b75 cpuidle: menu: help gcc generate slightly better code 
We know that the avg variable actually ends up holding a 32 bit
quantity, since it's an average of such numbers. It is only a u64
because it is temporarily used to hold the sum. Making it an actual
u32 allows gcc to generate slightly better code, e.g. when computing
the square, it can do a 32x32->64 multiply.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-02-17 00:28:15 +01:00
Rasmus Villemoes
7024b18ca4 cpuidle: menu: avoid expensive square root computation 
Computing the integer square root is a rather expensive operation, at
least compared to doing a 64x64 -> 64 multiply (avg*avg) and, on 64
bit platforms, doing an extra comparison to a constant (variance <=
U64_MAX/36).

On 64 bit platforms, this does mean that we add a restriction on the
range of the variance where we end up using the estimate (since
previously the stddev <= ULONG_MAX was a tautology), but on the other
hand, we extend the range quite substantially on 32 bit platforms - in
both cases, we now allow standard deviations up to 715 seconds, which
is for example guaranteed if all observations are less than 1430
seconds.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-02-17 00:27:16 +01:00
Rafael J. Wysocki
ad1ac94767 Merge branches 'pm-cpuidle', 'pm-cpufreq', 'pm-domains' and 'pm-sleep' 
* pm-cpuidle:
  cpuidle: coupled: remove unused define cpuidle_coupled_lock
  cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze

* pm-cpufreq:
  cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
  cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
  cpufreq: Use list_is_last() to check last entry of the policy list
  cpufreq: Fix NULL reference crash while accessing policy->governor_data

* pm-domains:
  PM / Domains: Fix typo in comment
  PM / Domains: Fix potential deadlock while adding/removing subdomains
  PM / domains: fix lockdep issue for all subdomains

* pm-sleep:
  PM: APM_EMULATION does not depend on PM
 2016-01-29 21:45:17 +01:00
Anders Roxell
75274b33e7 cpuidle: coupled: remove unused define cpuidle_coupled_lock 
This was found with the -RT patch enabled, but the fix should apply to
non-RT also.

Used multi_v7_defconfig+PREEMPT_RT_FULL=y and this caused a compilation
warning without this fix:
../drivers/cpuidle/coupled.c:122:21: warning: 'cpuidle_coupled_lock'
defined but not used [-Wunused-variable]

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-01-27 23:08:46 +01:00
Sudeep Holla
6f16886b7c cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze 
Commit 51164251f5 "sched / idle: Drop default_idle_call() fallback
from call_cpuidle()" made find_deepest_state() return non-negative
value and check all the states with index > 0.  Also as a result,
find_deepest_state() returns 0 even when enter_freeze callbacks are not
implemented and enter_freeze_proper() is called which ends up crashing
the kernel.

This patch updates the check for index > 0 in cpuidle_enter_freeze and
cpuidle_idle_call(when idle_should_freeze is true) to restore the
suspend-to-idle functionality in absence of enter_freeze callback.

Fixes: 51164251f5 "sched / idle: Drop default_idle_call() fallback from call_cpuidle()"
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-01-22 02:35:49 +01:00
Linus Torvalds
30f05309bd More power management and ACPI updates for v4.5-rc1 
- Modify the driver core and the USB subsystem to allow USB devices
    to stay suspended over system suspend/resume cycles if they have
    been runtime-suspended already beforehand and fix some bugs on
    top of these changes (Tomeu Vizoso, Rafael Wysocki).
 
  - Update ACPICA to upstream revision 20160108, including updates
    of the ACPICA's copyright notices, a code fixup resulting from
    a regression fix that was necessary in the upstream code only
    (the regression fixed by it has never been present in Linux)
    and a compiler warning fix (Bob Moore, Lv Zheng).
 
  - Fix a recent regression in the cpuidle menu governor that broke
    it on practically all architectures other than x86 and make a
    couple of optimizations on top of that fix (Rafael Wysocki).
 
  - Clean up the selection of cpuidle governors depending on whether
    or not the kernel is configured for tickless systems (Jean Delvare).
 
  - Revert a recent commit that introduced a regression in the ACPI
    backlight driver, address the problem it attempted to fix in a
    different way and revert one more cosmetic change depending on
    the problematic commit (Hans de Goede).
 
  - Add two more ACPI backlight quirks (Hans de Goede).
 
  - Fix a few minor problems in the core devfreq code, clean it up
    a bit and update the MAINTAINERS information related to it
    (Chanwoo Choi, MyungJoo Ham).
 
  - Improve an error message in the ACPI fan driver (Andy Lutomirski).
 
  - Fix a recent build regression in the cpupower tool (Shreyas Prabhu).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJWoCQ4AAoJEILEb/54YlRxLscQALEFVKSRnNaco72OqqRZs9Bu
 1RI6TgHTpZxR+Ef0+QWqE1QMnDwfImGhKDbSRm/t3S2sMYYZbAOL8cu4y6GmkBv4
 bOon/f9WEoPlQCFoo/6U4u8H45rNT5W9zX5+Bva8x+4Wu3n2J1QdvirnS5JHeHe1
 o6tGLaHuZXSwX8SLnCk8gJYK1VhATxbubJtpcVtvlnAhO11qUAwsscCrkUmB60i7
 5hLyrZb06hoa/hZVcIefGFuSd9qPhzDMQE2M20EohQ7UVkNJQdY9QNHMqCk2P42T
 nMWCNSwGnwfiO1p9ByXqunOFBCmyL7P+KV/DHsz6TFCVjz+jeG53Kqey9SkSJ/2W
 iaAE80K9MfOMvg8j7rib6fTn5uXBwRfqdeUDF/Hr64QqJoRn3R2LX4HmZe4L8ufb
 zA1rece67o8FD+7p7GkNbT3rPV/kA62tn/moFk446X5N+b261Kz90t1DVci8kRVf
 k+1gcvEdqO0GPpEHoirfXrBvQFixqkXakKj4r2aAob/DldQeLX7CkOUuRRJ1ykec
 bxwI9R0v8MlVe5rDxg+rPB0I9EFxRDmxqxpU5j0MRWxKnMRzLvBtHuk8YNVS/eU1
 xwyJOGcwF6yI0PaCFggPqmhebSrWLE7wJxaK+3bC+yiDTvHYPjB+4MfQrmkRAwwM
 azgb+ZgXDYx5wXeb8EjB
 =bKJ9
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management and ACPI updates from Rafael Wysocki:
 "This includes fixes on top of the previous batch of PM+ACPI updates
  and some new material as well.

  From the new material perspective the most significant are the driver
  core changes that should allow USB devices to stay suspended over
  system suspend/resume cycles if they have been runtime-suspended
  already beforehand.  Apart from that, ACPICA is updated to upstream
  revision 20160108 (cosmetic mostly, but including one fixup on top of
  the previous ACPICA update) and there are some devfreq updates the
  didn't make it before (due to timing).

  A few recent regressions are fixed, most importantly in the cpuidle
  menu governor and in the ACPI backlight driver and some x86 platform
  drivers depending on it.

  Some more bugs are fixed and cleanups are made on top of that.

  Specifics:

   - Modify the driver core and the USB subsystem to allow USB devices
     to stay suspended over system suspend/resume cycles if they have
     been runtime-suspended already beforehand and fix some bugs on top
     of these changes (Tomeu Vizoso, Rafael Wysocki).

   - Update ACPICA to upstream revision 20160108, including updates of
     the ACPICA's copyright notices, a code fixup resulting from a
     regression fix that was necessary in the upstream code only (the
     regression fixed by it has never been present in Linux) and a
     compiler warning fix (Bob Moore, Lv Zheng).

   - Fix a recent regression in the cpuidle menu governor that broke it
     on practically all architectures other than x86 and make a couple
     of optimizations on top of that fix (Rafael Wysocki).

   - Clean up the selection of cpuidle governors depending on whether or
     not the kernel is configured for tickless systems (Jean Delvare).

   - Revert a recent commit that introduced a regression in the ACPI
     backlight driver, address the problem it attempted to fix in a
     different way and revert one more cosmetic change depending on the
     problematic commit (Hans de Goede).

   - Add two more ACPI backlight quirks (Hans de Goede).

   - Fix a few minor problems in the core devfreq code, clean it up a
     bit and update the MAINTAINERS information related to it (Chanwoo
     Choi, MyungJoo Ham).

   - Improve an error message in the ACPI fan driver (Andy Lutomirski).

   - Fix a recent build regression in the cpupower tool (Shreyas
     Prabhu)"

* tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  cpuidle: menu: Avoid pointless checks in menu_select()
  sched / idle: Drop default_idle_call() fallback from call_cpuidle()
  cpupower: Fix build error in cpufreq-info
  cpuidle: Don't enable all governors by default
  cpuidle: Default to ladder governor on ticking systems
  time: nohz: Expose tick_nohz_enabled
  ACPICA: Update version to 20160108
  ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t'
  ACPICA: Additional 2016 copyright changes
  ACPICA: Reduce regression fix divergence from upstream ACPICA
  ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
  ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()"
  ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit
  ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses()
  ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses"
  ACPI / fan: Improve acpi_device_update_power error message
  ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
  cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0
  MAINTAINERS: Add devfreq-event entry
  MAINTAINERS: Add missing git repository and directory for devfreq
  ...
 2016-01-20 19:06:49 -08:00
Rafael J. Wysocki
5bb1729cbd cpuidle: menu: Avoid pointless checks in menu_select() 
If menu_select() cannot find a suitable state to return, it will
return the state index stored in data->last_state_idx.  This
means that it is pointless to look at the states whose indices
are less than or equal to data->last_state_idx in the main loop,
so don't do that.

Given that those checks are done on every idle state selection, this
change can save quite a bit of completely unnecessary overhead.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
 2016-01-19 15:28:23 +01:00
Rafael J. Wysocki
51164251f5 sched / idle: Drop default_idle_call() fallback from call_cpuidle() 
After commit 9c4b2867ed (cpuidle: menu: Fix menu_select() for
CPUIDLE_DRIVER_STATE_START == 0) it is clear that menu_select()
cannot return negative values.  Moreover, ladder_select_state()
will never return a negative value too, so make find_deepest_state()
return non-negative values too and drop the default_idle_call()
fallback from call_cpuidle().

This eliminates one branch from the idle loop and makes the governors
and find_deepest_state() handle the case when all states have been
disabled from sysfs consistently.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
 2016-01-19 15:27:49 +01:00
Jean Delvare
10475b34f4 cpuidle: Don't enable all governors by default 
Since commit d6f346f2d2 (cpuidle: improve governor Kconfig options)
the best cpuidle governor is selected automatically. There is little
point in additionally selecting the other one as it will not be used,
so don't select both governors by default.

Being able to select more than one governor is still good for
developers booting with cpuidle_sysfs_switch, though.

This fixes the second half of kernel BZ #65531.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=65531
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-01-15 22:39:58 +01:00
Jean Delvare
66a5f6b639 cpuidle: Default to ladder governor on ticking systems 
The menu governor is currently the default on all systems. However the
documentation claims that the ladder governor is preferred on ticking
systems. So bump the rating of the ladder governor when NO_HZ is
disabled, or when booting with nohz=off.

This fixes the first half of kernel BZ #65531.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=65531
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-01-15 22:36:19 +01:00
Linus Torvalds
f689b742f2 powerpc updates for 4.5 
- Ground work for the new Power9 MMU from Aneesh Kumar K.V
  - Optimise FP/VMX/VSX context switching from Anton Blanchard
 
  - Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica Gupta,
    Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling, Andrew Donnellan
  - Allow wrapper to work on non-english system from Laurent Vivier
  - Add rN aliases to the pt_regs_offset table from Rashmica Gupta
  - Fix module autoload for rackmeter & axonram drivers from Luis de Bethencourt
  - Include KVM guest test in all interrupt vectors from Paul Mackerras
  - Fix DSCR inheritance over fork() from Anton Blanchard
  - Make value-returning atomics & {cmp}xchg* & their atomic_ versions fully ordered from Boqun Feng
  - Print MSR TM bits in oops messages from Michael Neuling
  - Add TM signal return & invalid stack selftests from Michael Neuling
  - Limit EPOW reset event warnings from Vipin K Parashar
  - Remove the Cell QPACE code from Rashmica Gupta
  - Append linux_banner to exception information in xmon from Rashmica Gupta
  - Add selftest to check if VSRs are corrupted from Rashmica Gupta
  - Remove broken GregorianDay() from Daniel Axtens
  - Import Anton's context_switch2 benchmark into selftests from Michael Ellerman
  - Add selftest script to test HMI functionality from Daniel Axtens
  - Remove obsolete OPAL v2 support from Stewart Smith
  - Make enter_rtas() private from Michael Ellerman
  - PPR exception cleanups from Michael Ellerman
  - Add page soft dirty tracking from Laurent Dufour
  - Add support for Nvlink NPUs from Alistair Popple
  - Add support for kexec on 476fpe from Alistair Popple
  - Enable kernel CPU dlpar from sysfs from Nathan Fontenot
  - Copy only required pieces of the mm_context_t to the paca from Michael Neuling
  - Add a kmsg_dumper that flushes OPAL console output on panic from Russell Currey
  - Implement save_stack_trace_regs() to enable kprobe stack tracing from Steven Rostedt
  - Add HWCAP bits for Power9 from Michael Ellerman
  - Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V
  - Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins
  - scripts/recordmcount.pl: support data in text section on powerpc from Ulrich Weigand
  - Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand
 
  - cxl: Fix possible idr warning when contexts are released from Vaibhav Jain
  - cxl: use correct operator when writing pcie config space values from Andrew Donnellan
  - cxl: Fix DSI misses when the context owning task exits from Vaibhav Jain
  - cxl: fix build for GCC 4.6.x from Brian Norris
  - cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris
  - cxl: Enable PCI device ID for future IBM CXL adapter from Uma Krishnan
 
  - Freescale updates from Scott: Highlights include moving QE code out of
    arch/powerpc (to be shared with arm), device tree updates, and minor fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWmIxeAAoJEFHr6jzI4aWAA+cQAIXAw4WfVWJ2V4ZK+1eKfB57
 fdXG71PuXG+WYIWy71ly8keLHdzzD1NQ2OUB64bUVRq202nRgVc15ZYKRJ/FE/sP
 SkxaQ2AG/2kI2EflWshOi0Lu9qaZ+LMHJnszIqE/9lnGSB2kUI/cwsSXgziiMKXR
 XNci9v14SdDd40YV/6BSZXoxApwyq9cUbZ7rnzFLmz4hrFuKmB/L3LABDF8QcpH7
 sGt/YaHGOtqP0UX7h5KQTFLGe1OPvK6NWixSXeZKQ71ED6cho1iKUEOtBA9EZeIN
 QM5JdHFWgX8MMRA0OHAgidkSiqO38BXjmjkVYWoIbYz7Zax3ThmrDHB4IpFwWnk3
 l7WBykEXY7KEqpZzbh0GFGehZWzVZvLnNgDdvpmpk/GkPzeYKomBj7ZZfm3H1yGD
 BTHPwuWCTX+/K75yEVNO8aJO12wBg7DRl4IEwBgqhwU8ga4FvUOCJkm+SCxA1Dnn
 qlpS7qPwTXNIEfKMJcxp5X0KiwDY1EoOotd4glTN0jbeY5GEYcxe+7RQ302GrYxP
 zcc8EGLn8h6BtQvV3ypNHF5l6QeTW/0ZlO9c236tIuUQ5gQU39SQci7jQKsYjSzv
 BB1XdLHkbtIvYDkmbnr1elbeJCDbrWL9rAXRUTRyfuCzaFWTfZmfVNe8c8qwDMLk
 TUxMR/38aI7bLcIQjwj9
 =R5bX
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Core:
   - Ground work for the new Power9 MMU from Aneesh Kumar K.V
   - Optimise FP/VMX/VSX context switching from Anton Blanchard

  Misc:
   - Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica
     Gupta, Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling,
     Andrew Donnellan
   - Allow wrapper to work on non-english system from Laurent Vivier
   - Add rN aliases to the pt_regs_offset table from Rashmica Gupta
   - Fix module autoload for rackmeter & axonram drivers from Luis de
     Bethencourt
   - Include KVM guest test in all interrupt vectors from Paul Mackerras
   - Fix DSCR inheritance over fork() from Anton Blanchard
   - Make value-returning atomics & {cmp}xchg* & their atomic_ versions
     fully ordered from Boqun Feng
   - Print MSR TM bits in oops messages from Michael Neuling
   - Add TM signal return & invalid stack selftests from Michael Neuling
   - Limit EPOW reset event warnings from Vipin K Parashar
   - Remove the Cell QPACE code from Rashmica Gupta
   - Append linux_banner to exception information in xmon from Rashmica
     Gupta
   - Add selftest to check if VSRs are corrupted from Rashmica Gupta
   - Remove broken GregorianDay() from Daniel Axtens
   - Import Anton's context_switch2 benchmark into selftests from
     Michael Ellerman
   - Add selftest script to test HMI functionality from Daniel Axtens
   - Remove obsolete OPAL v2 support from Stewart Smith
   - Make enter_rtas() private from Michael Ellerman
   - PPR exception cleanups from Michael Ellerman
   - Add page soft dirty tracking from Laurent Dufour
   - Add support for Nvlink NPUs from Alistair Popple
   - Add support for kexec on 476fpe from Alistair Popple
   - Enable kernel CPU dlpar from sysfs from Nathan Fontenot
   - Copy only required pieces of the mm_context_t to the paca from
     Michael Neuling
   - Add a kmsg_dumper that flushes OPAL console output on panic from
     Russell Currey
   - Implement save_stack_trace_regs() to enable kprobe stack tracing
     from Steven Rostedt
   - Add HWCAP bits for Power9 from Michael Ellerman
   - Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V
   - Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins
   - scripts/recordmcount.pl: support data in text section on powerpc
     from Ulrich Weigand
   - Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand

  cxl:
   - cxl: Fix possible idr warning when contexts are released from
     Vaibhav Jain
   - cxl: use correct operator when writing pcie config space values
     from Andrew Donnellan
   - cxl: Fix DSI misses when the context owning task exits from Vaibhav
     Jain
   - cxl: fix build for GCC 4.6.x from Brian Norris
   - cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris
   - cxl: Enable PCI device ID for future IBM CXL adapter from Uma
     Krishnan

  Freescale:
   - Freescale updates from Scott: Highlights include moving QE code out
     of arch/powerpc (to be shared with arm), device tree updates, and
     minor fixes"

* tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (149 commits)
  powerpc/module: Handle R_PPC64_ENTRY relocations
  scripts/recordmcount.pl: support data in text section on powerpc
  powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
  powerpc/mm: fix _PAGE_SWP_SOFT_DIRTY breaking swapoff
  powerpc/mm: Fix _PAGE_PTE breaking swapoff
  cxl: Enable PCI device ID for future IBM CXL adapter
  cxl: use -Werror only with CONFIG_PPC_WERROR
  cxl: fix build for GCC 4.6.x
  powerpc: Add HWCAP bits for Power9
  powerpc/powernv: Reserve PE#0 on NPU
  powerpc/powernv: Change NPU PE# assignment
  powerpc/powernv: Fix update of NVLink DMA mask
  powerpc/powernv: Remove misleading comment in pci.c
  powerpc: Implement save_stack_trace_regs() to enable kprobe stack tracing
  powerpc: Fix build break due to paca mm_context_t changes
  cxl: Fix DSI misses when the context owning task exits
  MAINTAINERS: Update Scott Wood's e-mail address
  powerpc/powernv: Fix minor off-by-one error in opal_mce_check_early_recovery()
  powerpc: Fix style of self-test config prompts
  powerpc/powernv: Only delay opal_rtc_read() retry when necessary
  ...
 2016-01-15 13:18:47 -08:00
Rafael J. Wysocki
9c4b2867ed cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0 
Commit a9ceb78bc7 (cpuidle,menu: use interactivity_req to disable
polling) exposed a bug in menu_select() causing it to return -1
on systems with CPUIDLE_DRIVER_STATE_START equal to zero, although
it should have returned 0.  As a result, idle states are not entered
by CPUs on those systems.

Namely, on the systems in question data->last_state_idx is initially
equal to -1 and the above commit modified the condition that would
have caused it to be changed to 0 to be less likely to trigger which
exposed the problem.  However, setting data->last_state_idx initially
to -1 doesn't make sense at all and on the affected systems it should
always be set to CPUIDLE_DRIVER_STATE_START (ie. 0) unconditionally,
so make that happen.

Fixes: a9ceb78bc7 (cpuidle,menu: use interactivity_req to disable polling)
Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2016-01-14 23:24:22 +01:00
Stewart Smith
e4d54f71d2 powerpc/powernv: remove FW_FEATURE_OPALv3 and just use FW_FEATURE_OPAL 
Long ago, only in the lab, there was OPALv1 and OPALv2. Now there is
just OPALv3, with nobody ever expecting anything on pre-OPALv3 to
be cared about or supported by mainline kernels.

So, let's remove FW_FEATURE_OPALv3 and instead use FW_FEATURE_OPAL
exclusively.

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
 2015-12-17 22:40:54 +11:00
Paul Gortmaker
84599238ea drivers/cpuidle: make cpuidle-exynos.c explicitly non-modular 
The Kconfig currently controlling compilation of this code is:

cpuidle/Kconfig.arm:config ARM_EXYNOS_CPUIDLE
cpuidle/Kconfig.arm:    bool "Cpu Idle Driver for the Exynos processors"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2015-12-15 00:22:22 +01:00
Paul Gortmaker
fdc7d515ad drivers/cpuidle: make cpuidle-ux500.c explicitly non-modular 
The Kconfig currently controlling compilation of this code is:

cpuidle/Kconfig.arm:config ARM_U8500_CPUIDLE
cpuidle/Kconfig.arm:    bool "Cpu Idle Driver for the ST-E u8500 processors"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2015-12-15 00:22:22 +01:00
Paul Gortmaker
94e8057b84 drivers/cpuidle: make cpuidle-clps711x.c explicitly non-modular 
The Kconfig currently controlling compilation of this code is:

drivers/cpuidle/Kconfig.arm:config ARM_CLPS711X_CPUIDLE
drivers/cpuidle/Kconfig.arm:    bool "CPU Idle Driver for CLPS711X processors"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2015-12-15 00:22:21 +01:00
Rik van Riel
efddfd90fb cpuidle,menu: smooth out measured_us calculation 
The cpuidle state tables contain the maximum exit latency for each
cpuidle state. On x86, that is the exit latency for when the entire
package goes into that same idle state.

However, a lot of the time we only go into the core idle state,
not the package idle state. This means we see a much smaller exit
latency.

We have no way to detect whether we went into the core or package
idle state while idle, and that is ok.

However, the current menu_update logic does have the potential to
trip up the repeating pattern detection in get_typical_interval.
If the system is experiencing an exit latency near the idle state's
exit latency, some of the samples will have exit_us subtracted,
while others will not. This turns a repeating pattern into mush,
potentially breaking get_typical_interval.

Furthermore, for smaller sleep intervals, we know the chance that
all the cores in the package went to the same idle state are fairly
small. Dividing the measured_us by two, instead of subtracting the
full exit latency when hitting a small measured_us, will reduce the
error.

Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2015-11-17 02:24:25 +01:00
Rik van Riel
a9ceb78bc7 cpuidle,menu: use interactivity_req to disable polling 
The menu governor carefully figures out how much time we typically
sleep for an estimated sleep interval, or whether there is a repeating
pattern going on, and corrects that estimate for the CPU load.

Then it proceeds to ignore that information when determining whether
or not to consider polling. This is not a big deal on most x86 CPUs,
which have very low C1 latencies, and the patch should not have any
effect on those CPUs.

However, certain CPUs (eg. Atom) have much higher C1 latencies, and
it would be good to not waste performance and power on those CPUs if
we are expecting a very low wakeup latency.

Disable polling based on the estimated interactivity requirement, not
on the time to the next timer interrupt.

Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2015-11-17 02:24:25 +01:00
Rik van Riel
7884084f3b cpuidle,x86: increase forced cut-off for polling to 20us 
The cpuidle menu governor has a forced cut-off for polling at 5us,
in order to deal with firmware that gives the OS bad information
on cpuidle states, leading to the system spending way too much time
in polling.

However, at least one x86 CPU family (Atom) has chips that have
a 20us break-even point for C1. Forcing the polling cut-off to
less than that wastes performance and power.

Increase the polling cut-off to 20us.

Systems with a lower C1 latency will be found in the states table by
the menu governor, which will pick those states as appropriate.

Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2015-11-17 02:24:24 +01:00
Russell King
ab319939a5 cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver 
As the driver doesn't support unbinding, nor does it support arbitary
binding of devices, disable the bind/unbind attributes for this driver.
Also, as the driver has no remove function, it can never be modular,
so use builtin_platform_driver() to avoid the module exit boilerplate.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
 2015-10-23 12:40:48 +02:00
Russell King
da1a64f80d cpuidle: mvebu: clean up multiple platform drivers 
There's no need to use multiple platform drivers, especially when we
want to do something different in the probe, but we still use a common
probe function.

We can use the platform ID system to only register one platform driver,
but have it match several devices, and give us the CPU idle driver via
the ID's driver_data.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
 2015-10-23 12:40:47 +02:00
Linus Torvalds
fa9a67ef9d Additional power management and ACPI material for v4.3-rc1 
- Build fix for the new Mediatek MT8173 cpufreq driver (Guenter Roeck).
 
  - Generic power domains framework fixes (power on error code
    path, subdomain removal) and cleanup of a deprecated API user
    (Geert Uytterhoeven, Jon Hunter, Ulf Hansson).
 
  - cpufreq-dt driver fixes including two fixes for bugs related to
    the new Operating Performance Points Device Tree bindings
    introduced recently (Viresh Kumar).
 
  - Suspend frequency support for the cpufreq-dt driver
    (Bartlomiej Zolnierkiewicz, Viresh Kumar).
 
  - cpufreq core cleanups (Viresh Kumar).
 
  - intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi).
 
  - Additional sanity check in the cpuidle core (Xunlei Pang).
 
  - Fix for a comment related to CPU power management (Lina Iyer).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJV80XwAAoJEILEb/54YlRxIAkP/RrT4mDO9QZkocO+XYDBB739
 oi1aaSDmmVVKlFtFiyX4njS7S+U5UC8PYn5o/fFtVnP1kD9yuZkoak65U3t7bsKK
 +rjun1SzJeooaLXW4ZAJKyPldi/RrsfRJ2JOaEt2vK03ppjx2mouK1VpjNj+qmYd
 wwFb4q5S5Rcpph0Sx+xxhpZKoOgBmXk7nWIe5bWDxuORdx4yoxp4lus/P223wFJy
 r0kJnNyY55mnY4Yx5e3L8W1rMC/Sf6mt8pyMvqRpsKdBHaEbhmGsiERSi0eCZJwr
 AmL666TVgPk6zNM/yc3mFOTRZeAF3soSWF5R6+n2TswWvWFH+ksM14g9ndb7fTv3
 FUuOU3jyfSUj2T4xr0qUZLaQUFB3xNrnWBNnm/CzPwjJtH1u1SK8uBSRqdZnEdGq
 EeqwnwDLFeSAbG6lQVsKVVAPZHolDCnJPsvZebKdnJH09kjgUdm60BLOnif4QDgw
 ULPZ6NToFZkrQSMAX1Uqm42iv/qWcHIgS5x43jAmblY3TsuByqRrI7gBCy+hbGSN
 cQfeCxTdVPi/tUPYlJFmWn43dgEsnceSFKvlQRXGrZJM29BFvhVzJQjTFC8Oj79q
 OP/Rv28+VeV5J531BQu+w8cvg73GJ3DDab+i91ZkIsd7ZNjRYQKXBfR9TImTSD4l
 BPjvaPXwDg6EPhwjcpK/
 =C7+4
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups on top of the previous PM+ACPI
  pull request (cpufreq core and drivers, cpuidle, generic power domains
  framework).  Some of them didn't make to that pull request and some
  fix issues introduced by it.

  The only really new thing is the support for suspend frequency in the
  cpufreq-dt driver, but it is needed to fix an issue with Exynos
  platforms.

  Specifics:

   - build fix for the new Mediatek MT8173 cpufreq driver (Guenter
     Roeck).

   - generic power domains framework fixes (power on error code path,
     subdomain removal) and cleanup of a deprecated API user (Geert
     Uytterhoeven, Jon Hunter, Ulf Hansson).

   - cpufreq-dt driver fixes including two fixes for bugs related to the
     new Operating Performance Points Device Tree bindings introduced
     recently (Viresh Kumar).

   - suspend frequency support for the cpufreq-dt driver (Bartlomiej
     Zolnierkiewicz, Viresh Kumar).

   - cpufreq core cleanups (Viresh Kumar).

   - intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi).

   - additional sanity check in the cpuidle core (Xunlei Pang).

   - fix for a comment related to CPU power management (Lina Iyer)"

* tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_pstate: fix PCT_TO_HWP macro
  intel_pstate: Fix user input of min/max to legal policy region
  PM / OPP: Return suspend_opp only if it is enabled
  cpufreq-dt: add suspend frequency support
  cpufreq: allow cpufreq_generic_suspend() to work without suspend frequency
  PM / OPP: add dev_pm_opp_get_suspend_opp() helper
  staging: board: Migrate away from __pm_genpd_name_add_device()
  cpufreq: Use __func__ to print function's name
  cpufreq: staticize cpufreq_cpu_get_raw()
  PM / Domains: Ensure subdomain is not in use before removing
  cpufreq: Add ARM_MT8173_CPUFREQ dependency on THERMAL
  cpuidle/coupled: Add sanity check for safe_state_index
  PM / Domains: Try power off masters in error path of __pm_genpd_poweron()
  cpufreq: dt: Tolerance applies on both sides of target voltage
  cpufreq: dt: Print error on failing to mark OPPs as shared
  cpufreq: dt: Check OPP count before marking them shared
  kernel/cpu_pm: fix cpu_cluster_pm_exit comment
 2015-09-11 19:11:06 -07:00
Rafael J. Wysocki
4614e0cc66 Merge branches 'pm-cpu', 'pm-cpuidle' and 'pm-domains' 
* pm-cpu:
  kernel/cpu_pm: fix cpu_cluster_pm_exit comment

* pm-cpuidle:
  cpuidle/coupled: Add sanity check for safe_state_index

* pm-domains:
  staging: board: Migrate away from __pm_genpd_name_add_device()
  PM / Domains: Ensure subdomain is not in use before removing
  PM / Domains: Try power off masters in error path of __pm_genpd_poweron()
 2015-09-11 15:37:36 +02:00
Linus Torvalds
c706c7eb0d Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm 
Pull ARM development updates from Russell King:
 "Included in this update:

   - moving PSCI code from ARM64/ARM to drivers/

   - removal of some architecture internals from global kernel view

   - addition of software based "privileged no access" support using the
     old domains register to turn off the ability for kernel
     loads/stores to access userspace.  Only the proper accessors will
     be usable.

   - addition of early fixup support for early console

   - re-addition (and reimplementation) of OMAP special interconnect
     barrier

   - removal of finish_arch_switch()

   - only expose cpuX/online in sysfs if hotpluggable

   - a number of code cleanups"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (41 commits)
  ARM: software-based priviledged-no-access support
  ARM: entry: provide uaccess assembly macro hooks
  ARM: entry: get rid of multiple macro definitions
  ARM: 8421/1: smp: Collapse arch_cpu_idle_dead() into cpu_die()
  ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore()
  ARM: mm: improve do_ldrd_abort macro
  ARM: entry: ensure that IRQs are enabled when calling syscall_trace_exit()
  ARM: entry: efficiency cleanups
  ARM: entry: get rid of asm_trace_hardirqs_on_cond
  ARM: uaccess: simplify user access assembly
  ARM: domains: remove DOMAIN_TABLE
  ARM: domains: keep vectors in separate domain
  ARM: domains: get rid of manager mode for user domain
  ARM: domains: move initial domain setting value to asm/domains.h
  ARM: domains: provide domain_mask()
  ARM: domains: switch to keeping domain value in register
  ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE
  ARM: 8417/1: refactor bitops functions with BIT_MASK() and BIT_WORD()
  ARM: 8416/1: Feroceon: use of_iomap() to map register base
  ARM: 8415/1: early fixmap support for earlycon
  ...
 2015-09-03 16:27:01 -07:00
Xunlei Pang
abceaa9cde cpuidle/coupled: Add sanity check for safe_state_index 
Since we are using cpuidle_driver::safe_state_index directly as the
target state index, it is better to add the sanity check at the point
of registering the driver.

Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2015-09-03 03:05:47 +02:00
Linus Torvalds
ae98207309 Power management and ACPI material for v4.3-rc1 
- ACPICA update to upstream revision 20150818 including method
    tracing extensions to allow more in-depth AML debugging in the
    kernel and a number of assorted fixes and cleanups (Bob Moore,
    Lv Zheng, Markus Elfring).
 
  - ACPI sysfs code updates and a documentation update related to
    AML method tracing (Lv Zheng).
 
  - ACPI EC driver fix related to serialized evaluations of _Qxx
    methods and ACPI tools updates allowing the EC userspace tool
    to be built from the kernel source (Lv Zheng).
 
  - ACPI processor driver updates preparing it for future
    introduction of CPPC support and ACPI PCC mailbox driver
    updates (Ashwin Chaugule).
 
  - ACPI interrupts enumeration fix for a regression related
    to the handling of IRQ attribute conflicts between MADT
    and the ACPI namespace (Jiang Liu).
 
  - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar).
 
  - ACPI device registration code reorganization to separate the
    sysfs-related code and bus type operations from the rest (Rafael
    J Wysocki).
 
  - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
    Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
 
  - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups
    (Pan Xinhui, Rafael J Wysocki).
 
  - cpufreq core cleanups on top of the previous changes allowing it
    to preseve its sysfs directories over system suspend/resume (Viresh
    Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
 
  - cpufreq fixes and cleanups related to governors (Viresh Kumar).
 
  - cpufreq updates (core and the cpufreq-dt driver) related to the
    turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
 
  - New DT bindings for Operating Performance Points (OPP), support
    for them in the OPP framework and in the cpufreq-dt driver plus
    related OPP framework fixes and cleanups (Viresh Kumar).
 
  - cpufreq powernv driver updates (Shilpasri G Bhat).
 
  - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
 
  - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
    and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
 
  - intel_pstate driver updates including Skylake-S support, support
    for enabling HW P-states per CPU and an additional vendor bypass
    list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
 
  - cpuidle core fixes related to the handling of coupled idle states
    (Xunlei Pang).
 
  - intel_idle driver updates including Skylake Client support and
    support for freeze-mode-specific idle states (Len Brown).
 
  - Driver core updates related to power management (Andy Shevchenko,
    Rafael J Wysocki).
 
  - Generic power domains framework fixes and cleanups (Jon Hunter,
    Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
 
  - Device PM QoS framework update to allow the latency tolerance
    setting to be exposed to user space via sysfs (Mika Westerberg).
 
  - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
    exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
 
  - System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
 
  - rockchip-io AVS support updates (Heiko Stuebner).
 
  - PM core clocks support fixup (Colin Ian King).
 
  - Power capping RAPL driver update including support for Skylake H/S
    and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
 
  - Generic device properties framework fixes related to the handling
    of static (driver-provided) property sets (Andy Shevchenko).
 
  - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
    Shreyas B Prabhu).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJV5hhGAAoJEILEb/54YlRxs+EQAK51iFk48+IbpHYaZZ50Yo4m
 ZZc2zBcbwRcBlU9vKERrhG+jieSl8J/JJNxT8vBjKqyvNw038mCjewQh02ol0HuC
 R7nlDiVJkmZ50sLO4xwE/1UBZr/XqbddwCUnYzvFMkMTA0ePzFtf8BrJ1FXpT8S/
 fkwSXQty6hvJDwxkfrbMSaA730wMju9lahx8D6MlmUAedWYZOJDMQKB4WKa/St5X
 9uckBPHUBB2KiKlXxdbFPwKLNxHvLROq5SpDLc6cM/7XZB+QfNFy85CUjCUtYo1O
 1W8k0qnztvZ6UEv27qz5dejGyAGOarMWGGNsmL9evoeGeHRpQL+dom7HcTnbAfUZ
 walyhYSm/zKkdy7Vl3xWUUQkMG48+PviMI6K0YhHXb3Rm5wlR/yBNZTwNIty9SX/
 fKCHEa8QynWwLxgm53c3xRkiitJxMsHNK03moLD9zQMjshTyTNvpNbZoahyKQzk6
 H+9M1DBRHhkkREDWSwGutukxfEMtWe2vcZcyERrFiY7l5k1j58DwDBMPqjPhRv6q
 P/1NlCzr0XYf83Y86J18LbDuPGDhTjjIEn6CqbtI2mmWqTg3+rF7zvS2ux+FzMnA
 gisv8l6GT9JiWhxKFqqL/rrVpwtyHebWLYE/RpNUW6fEzLziRNj1qyYO9dqI/GGi
 I3rfxlXoc/5xJWCgNB8f
 =fTgI
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "From the number of commits perspective, the biggest items are ACPICA
  and cpufreq changes with the latter taking the lead (over 50 commits).

  On the cpufreq front, there are many cleanups and minor fixes in the
  core and governors, driver updates etc.  We also have a new cpufreq
  driver for Mediatek MT8173 chips.

  ACPICA mostly updates its debug infrastructure and adds a number of
  fixes and cleanups for a good measure.

  The Operating Performance Points (OPP) framework is updated with new
  DT bindings and support for them among other things.

  We have a few updates of the generic power domains framework and a
  reorganization of the ACPI device enumeration code and bus type
  operations.

  And a lot of fixes and cleanups all over.

  Included is one branch from the MFD tree as it contains some
  PM-related driver core and ACPI PM changes a few other commits are
  based on.

  Specifics:

   - ACPICA update to upstream revision 20150818 including method
     tracing extensions to allow more in-depth AML debugging in the
     kernel and a number of assorted fixes and cleanups (Bob Moore, Lv
     Zheng, Markus Elfring).

   - ACPI sysfs code updates and a documentation update related to AML
     method tracing (Lv Zheng).

   - ACPI EC driver fix related to serialized evaluations of _Qxx
     methods and ACPI tools updates allowing the EC userspace tool to be
     built from the kernel source (Lv Zheng).

   - ACPI processor driver updates preparing it for future introduction
     of CPPC support and ACPI PCC mailbox driver updates (Ashwin
     Chaugule).

   - ACPI interrupts enumeration fix for a regression related to the
     handling of IRQ attribute conflicts between MADT and the ACPI
     namespace (Jiang Liu).

   - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi
     Kasagar).

   - ACPI device registration code reorganization to separate the
     sysfs-related code and bus type operations from the rest (Rafael J
     Wysocki).

   - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
     Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).

   - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan
     Xinhui, Rafael J Wysocki).

   - cpufreq core cleanups on top of the previous changes allowing it to
     preseve its sysfs directories over system suspend/resume (Viresh
     Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).

   - cpufreq fixes and cleanups related to governors (Viresh Kumar).

   - cpufreq updates (core and the cpufreq-dt driver) related to the
     turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).

   - New DT bindings for Operating Performance Points (OPP), support for
     them in the OPP framework and in the cpufreq-dt driver plus related
     OPP framework fixes and cleanups (Viresh Kumar).

   - cpufreq powernv driver updates (Shilpasri G Bhat).

   - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).

   - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
     and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).

   - intel_pstate driver updates including Skylake-S support, support
     for enabling HW P-states per CPU and an additional vendor bypass
     list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).

   - cpuidle core fixes related to the handling of coupled idle states
     (Xunlei Pang).

   - intel_idle driver updates including Skylake Client support and
     support for freeze-mode-specific idle states (Len Brown).

   - Driver core updates related to power management (Andy Shevchenko,
     Rafael J Wysocki).

   - Generic power domains framework fixes and cleanups (Jon Hunter,
     Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).

   - Device PM QoS framework update to allow the latency tolerance
     setting to be exposed to user space via sysfs (Mika Westerberg).

   - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
     exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).

   - System sleep support updates (Alan Stern, Len Brown, SungEun Kim).

   - rockchip-io AVS support updates (Heiko Stuebner).

   - PM core clocks support fixup (Colin Ian King).

   - Power capping RAPL driver update including support for Skylake H/S
     and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).

   - Generic device properties framework fixes related to the handling
     of static (driver-provided) property sets (Andy Shevchenko).

   - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
     Shreyas B Prabhu)"

* tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits)
  cpufreq: speedstep-lib: Use monotonic clock
  cpufreq: powernv: Increase the verbosity of OCC console messages
  cpufreq: sfi: use kmemdup rather than duplicating its implementation
  cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor()
  cpufreq: rename cpufreq_real_policy as cpufreq_user_policy
  cpufreq: remove redundant 'policy' field from user_policy
  cpufreq: remove redundant 'governor' field from user_policy
  cpufreq: update user_policy.* on success
  cpufreq: use memcpy() to copy policy
  cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event
  cpufreq: mediatek: Add MT8173 cpufreq driver
  dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
  PM / Domains: Fix typo in description of genpd_dev_pm_detach()
  PM / Domains: Remove unusable governor dummies
  PM / Domains: Make pm_genpd_init() available to modules
  PM / domains: Align column headers and data in pm_genpd_summary output
  powercap / RAPL: disable the 2nd power limit properly
  tools: cpupower: Fix error when running cpupower monitor
  PM / OPP: Drop unlikely before IS_ERR(_OR_NULL)
  PM / OPP: Fix static checker warning (broken 64bit big endian systems)
  ...
 2015-09-01 19:45:46 -07:00
Linus Torvalds
a1d8561172 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull scheduler updates from Ingo Molnar:
 "The biggest change in this cycle is the rewrite of the main SMP load
  balancing metric: the CPU load/utilization.  The main goal was to make
  the metric more precise and more representative - see the changelog of
  this commit for the gory details:

    9d89c257df ("sched/fair: Rewrite runnable load and utilization average tracking")

  It is done in a way that significantly reduces complexity of the code:

    5 files changed, 249 insertions(+), 494 deletions(-)

  and the performance testing results are encouraging.  Nevertheless we
  need to keep an eye on potential regressions, since this potentially
  affects every SMP workload in existence.

  This work comes from Yuyang Du.

  Other changes:

   - SCHED_DL updates.  (Andrea Parri)

   - Simplify architecture callbacks by removing finish_arch_switch().
     (Peter Zijlstra et al)

   - cputime accounting: guarantee stime + utime == rtime.  (Peter
     Zijlstra)

   - optimize idle CPU wakeups some more - inspired by Facebook server
     loads.  (Mike Galbraith)

   - stop_machine fixes and updates.  (Oleg Nesterov)

   - Introduce the 'trace_sched_waking' tracepoint.  (Peter Zijlstra)

   - sched/numa tweaks.  (Srikar Dronamraju)

   - misc fixes and small cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  sched/deadline: Fix comment in enqueue_task_dl()
  sched/deadline: Fix comment in push_dl_tasks()
  sched: Change the sched_class::set_cpus_allowed() calling context
  sched: Make sched_class::set_cpus_allowed() unconditional
  sched: Fix a race between __kthread_bind() and sched_setaffinity()
  sched: Ensure a task has a non-normalized vruntime when returning back to CFS
  sched/numa: Fix NUMA_DIRECT topology identification
  tile: Reorganize _switch_to()
  sched, sparc32: Update scheduler comments in copy_thread()
  sched: Remove finish_arch_switch()
  sched, tile: Remove finish_arch_switch
  sched, sh: Fold finish_arch_switch() into switch_to()
  sched, score: Remove finish_arch_switch()
  sched, avr32: Remove finish_arch_switch()
  sched, MIPS: Get rid of finish_arch_switch()
  sched, arm: Remove finish_arch_switch()
  sched/fair: Clean up load average references
  sched/fair: Provide runnable_load_avg back to cfs_rq
  sched/fair: Remove task and group entity load when they are dead
  sched/fair: Init cfs_rq's sched_entity load average
  ...
 2015-08-31 20:26:22 -07:00
Xunlei Pang
4c1ed5a607 cpuidle/coupled: Remove redundant 'dev' argument of cpuidle_state_is_coupled() 
For cpuidle_state_is_coupled(), 'dev' is not used, so remove it.

Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2015-08-28 15:14:54 +02:00