A bit bigger than I would normally like, but most of the large changes are
for polaris support and since polaris went upstream in 4.7, I'd like
to get the fixes in so it's in good shape when the hw becomes available.
The major changes only touch the polaris code so there is little chance
for regressions on other asics. The rest are just the usual collection
of bug fixes.
* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: enable clock stretch feature for polaris
drm/amdgpu/gfx8: update golden setting for polaris10
drm/amd/powerplay: enable avfs feature for polaris
drm/amdgpu/atombios: add avfs struct for Polaris10/11
drm/amd/powerplay: add avfs related define for polaris
drm/amd/powrplay: enable stutter_mode for polaris.
drm/amd/powerplay: disable UVD SMU handshake for MCLK.
drm/amd/powerplay: initialize variables which were missed.
drm/amd/powerplay: enable PowerContainment feature for polaris10/11.
drm/amd/powerplay: need to notify system bios pcie device ready
drm/amd/powerplay: fix bug that function parameter was incorect.
drm/amd/powerplay: fix logic error.
drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value
drm/amdgpu: precedence bug in amdgpu_device_init()
drm/amdgpu: fix num_rbs exposed to userspace (v2)
drm/amdgpu: missing bounds check in amdgpu_set_pp_force_state()
Since HW trigger mode was suppoted we have faced with a issue
that Display panel didn't work correctly when trigger mode was changed
in booting time.
For this, we keep trigger mode with SW trigger mode in default mode
like we did before.
However, we will need to consider PSR(Panel Self Reflash) mode to resolve
this issue fundamentally later.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: use logical AND in exynos_drm_plane_check_size()
drm/exynos: remove superfluous inclusions of fbdev header
drm/exynos: g2d: drop the _REG postfix from the stride defines
drm/exynos: don't use HW trigger for Exynos5420/5422/5800
drm/exynos: fimd: don't set .has_hw_trigger in s3c6400 driver data
drm/exynos: dp: Fix NULL pointer dereference due uninitialized connector
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1u1Q
-----END PGP SIGNATURE-----
Merge tag 'drm-atmel-hlcdc-fixes/for-4.7-rc5' of github.com:bbrezillon/linux-at91 into drm-fixes
Two bug fixes for the atmel-hlcdc driver.
* tag 'drm-atmel-hlcdc-fixes/for-4.7-rc5' of github.com:bbrezillon/linux-at91:
drm: atmel-hlcdc: Fix OF graph parsing
drm: atmel-hlcdc: actually disable scaling when no scaling is required
Hi Dave, just a couple of display fixes, both stable stuff. Maybe we'll
be able to enable fbc by default one day.
* tag 'drm-intel-fixes-2016-06-22' of git://anongit.freedesktop.org/drm-intel:
drm/i915/fbc: Disable on HSW by default for now
drm/i915: Revert DisplayPort fast link training feature
Hello,
after this commit:
commit f045f459d9
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Thu Jun 2 12:23:31 2016 +1000
drm/nouveau/fbcon: fix out-of-bounds memory accesses
kernel started to oops when loading nouveau module when using GTX 780 Ti
video adapter. This patch fixes the problem.
Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=120591
Signed-off-by: Dmitrii Tcvetkov <demfloro@demfloro.ru>
Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes: f045f459d9 ("nouveau_fbcon_init()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
>From https://bugs.freedesktop.org/show_bug.cgi?id=96461 :
This was kind of a difficult bug to track down. If you're using a
Haswell system running GNOME and you have fbc completely enabled and
working, playing videos can result in video artifacts. Steps to
reproduce:
- Run GNOME
- Ensure FBC is enabled and active
- Download a movie, I used the ogg version of Big Buck Bunny for this
- Run `gst-launch-1.0 filesrc location='some_movie.ogg' ! decodebin !
glimagesink` in a terminal
- Watch for about over a minute, you'll see small horizontal lines go
down the screen.
For the time being, disable FBC for Haswell by default.
Stefan Richter reported kernel freezes (no video artifacts) when fbc
is on. (E3-1245 v3 with HD P4600; openbox and some KDE and LXDE
applications, thread begins at https://lkml.org/lkml/2016/4/26/813).
We also got reports from Steven Honeyman on openbox+roxterm.
v2 (From Paulo):
- Add extra information to the commit message
- Add Fixes tag
- Rebase
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96461
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96464
Fixes: a98ee79317 ("drm/i915/fbc: enable FBC by default on HSW and BDW")
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465487895-7401-1-git-send-email-cpaul@redhat.com
(cherry picked from commit c7f7e2feff)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It has been found out that in some HW combination the DisplayPort
fast link training feature caused screen flickering. Let's revert
this feature for now until we can ensure that the feature works for
all platforms.
This is a manual revert of commits 5fa836a9d8 ("drm/i915: DP link
training optimization") and 4e96c97742 ("drm/i915: eDP link training
optimization").
Fixes: 5fa836a9d8 ("drm/i915: DP link training optimization")
Fixes: 4e96c97742 ("drm/i915: eDP link training optimization")
Cc: <stable@vger.kernel.org> # v4.2+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466410226-19543-1-git-send-email-mika.kahola@intel.com
(cherry picked from commit 91df09d92a)
Power saving feature which reduces the amount of
voltage needed for specific engine clocks.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
avfs feature is for voltage control based on
gpu system clock on polaris10
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To minimize the dram power expenditure during static -screen
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sync up with internal programming recommendations.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missing pcie dpm settings.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
before request performance state.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Wrong value passed to acpi_pcie_perf_request.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
the error lead powerplay can't get display info in DGPU case.
store_cc6_data just implement in APU.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
atmel_hlcdc_create_outputs() iterates over OF graph nodes and releases
the node (using of_node_put()) after each iteration, which is wrong
since for_each_endpoint_of_node() is already taking care of that.
Move the of_node_put() call in the error path.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 17a8e03e7e ("drm: atmel-hlcdc: rework the output code to support drm bridges")
The driver is only enabling scaling, but never disabling it, thus, if you
enable the scaling feature once it stays enabled forever.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 1a396789f6 ("drm: add Atmel HLCDC Display Controller support")
Cc: <stable@vger.kernel.org>
amdgpu_cgs_acpi_eval_object() returned the value of variable "result"
without initializing it first.
This bug has been found by compiling the kernel with clang. The
compiler complained:
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: error: variable
'result' is used uninitialized whenever 'for' loop exits because its
condition is false [-Werror,-Wsometimes-uninitialized]
for (i = 0; i < count; i++) {
^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:1011:9: note: uninitialized
use occurs here
return result;
^~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: note: remove the
condition if it is always true
for (i = 0; i < count; i++) {
^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:864:12: note: initialize the
variable 'result' to silence this warning
int result;
^
= 0
Fixes: 3f1d35a03b ("drm/amdgpu: implement new cgs interface for acpi
function")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
! has higher precedence than bitwise & so we need to add parenthesis
for this to work as intended.
Fixes: 048765ad5a ('amdgpu: fix asic initialization for virtualized environments (v2)')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current bitwise AND should result in the same assembler
but this is what the code is actually supposed to do.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Neither of these files issue any fbdev related calls.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This makes the defines consistent with the rest.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Commit a6f75aa161 ("drm/exynos: fimd: add HW trigger support") added
hardware trigger support to the FIMD controller driver. But this broke
the display in at least the Exynos5800 Peach Pi Chromebook.
So until the issue is fixed, avoid using HW trigger for the Exynos5420
based boards and use SW trigger as it was before the mentioned commit.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The field value is only checked in fimd_setup_trigger() if .trg_type is
I80_HW_TRG so there's no point in setting this field for the s3c6400 if
is never going to be used since .trg_type is not set.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Commit 3424e3a4f8 ("drm: bridge: analogix/dp: split exynos dp driver to
bridge directory") split the Exynos DP core driver into a core driver and
a bridge driver for the Analogix chip since that is also used by Rockchip.
But the change introduced a regression causing a NULL pointer dereference
when trying to access an uninitialized connector in the driver .get_modes:
Fix this by instead of having a connector struct for both the Exynos and
Analogix drivers, just use the connector initialized in the bridge driver.
Fixes: 3424e3a4f8 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory")
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This was accidently broken for harvest cards when the
code was refactored for Polaris support.
v2: multiply by shader engines. Noticed by Nicolai.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
There is no limit on high "idx" can go. It should be less than
ARRAY_SIZE(data.states) which is 16.
The "data" variable wasn't declared in that scope so I shifted the code
around a bit to make it work. Also I made "idx" unsigned.
Fixes: f3898ea12f ('drm/amd/powerplay: add some sysfs interfaces for powerplay.')
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull drm fixes from Dave Airlie:
"The main drm fixes pull for rc4: one regression fix in the connector
refcounting, and an MST fix.
There rest is nouveau, amdkfd, i915, etnaviv, and radeon/amdgpu fixes,
mostly regression or black screen fixes"
* tag 'drm-fixes-for-v4.7-rc4' of git://people.freedesktop.org/~airlied/linux: (23 commits)
drm/etnaviv: initialize iommu domain page size
drm/nouveau/iccsense: fix memory leak
drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"
drm/amd/powerplay: select samu dpm 0 as boot level on polaris.
drm/amd/powerplay: update powerplay table parsing
drm/dp/mst: Always clear proposed vcpi table for port.
drm/crtc: only store the necessary data for set_config rollback
drm/crtc: fix connector reference counting mismatch in drm_crtc_helper_set_config
drm/i915/ilk: Don't disable SSC source if it's in use
Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx"
drm/amdgpu/gfx7: fix broken condition check
drm/radeon: fix asic initialization for virtualized environments
amdgpu: fix asic initialization for virtualized environments (v2)
drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled
drm/radeon: do not hard reset GPU while freezing on r600/r700 family
drm/i915: Extract physical display dimensions from VBT
drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV
drm/i915: Only ignore eDP ports that are connected
drm/i915: Silence "unexpected child device config size" for VBT on 845g
drm/i915: Fix NULL pointer deference when out of PLLs in IVB
...
radeon and amdgpu fixes for 4.7. Highlights:
- fixes for GPU VM passthrough
- fixes for powerplay on Polaris GPUs
- pll fixes for rs780/880
* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: select samu dpm 0 as boot level on polaris.
drm/amd/powerplay: update powerplay table parsing
Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx"
drm/amdgpu/gfx7: fix broken condition check
drm/radeon: fix asic initialization for virtualized environments
amdgpu: fix asic initialization for virtualized environments (v2)
drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled
drm/radeon: do not hard reset GPU while freezing on r600/r700 family
just a single fix for a regression introduced by IOMMU API changes in
v4.7.
* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
drm/etnaviv: initialize iommu domain page size
Since d16e0faab9 (iommu: Allow selecting page sizes per domain) the
iommu core demands the page size to be set per domain, otherwise any
mapping attempts will be dropped. Make sure to set a valid page size
for the etnaviv iommu.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
* 'linux-4.7' of git://github.com/skeggsb/linux:
drm/nouveau/iccsense: fix memory leak
drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"
to handle pptable format change on Polaris boards
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch.
Fixes: 91a25e4631 ("drm/dp/mst: deallocate payload on port destruction")
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Cc: stable@vger.kernel.org
Cc: Mykola Lysenko <Mykola.Lysenko@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
drm_crtc_helper_set_config only potentially touches connector->encoder
and encoder->crtc, so we only have to store those for all connectors
and encoders, respectively.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since commit 0955c1250e ("drm/crtc: take references to connectors used
in a modeset. (v2)"), the reference counts of all connectors in the
drm_mode_set given to drm_crtc_helper_set_config are incremented, and then
the reference counts of all connectors are decremented on success, but in a
temporary copy of the connector structure. This leads to the following
error after the first modeset on imx-drm:
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = ad8c4000
[00000004] *pgd=3d9c5831, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 190 Comm: kmsfb-manage Not tainted 4.7.0-rc1+ #657
Hardware name: Freescale i.MX6 Quad/DualLit: [<80506098>] lr : [<80252e94>] psr: 200c0013
sp : adca7ca8 ip : adca7b90 fp : adca7cd4
r10: 00000000 r9 : 00000100 r8 : 00000200
r7 : af3c9800 r6 : aded7848 r5 : aded7800 r4 : 00000000
r3 : af3ca058 r2 : 00000200 r1 : af3ca058 r0 : 00000000
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 3d8c404a DAC: 00000051
Process kmsfb-manage (pid: 190, stack limit = 0xadca6210)
Stack: (0xadca7ca8 to 0xadca8000)
7ca0: 805190e0 aded7800 aded7820 80501a88 8155a290 af3c9c6c
7cc0: adca7ddc 0000000f adca7cec adca7cd8 80519104 80506044 805190e0 aded7800
7ce0: adca7d04 adca7cf0 80501ac0 805190ec aded7820 aded7814 adca7d24 adca7d08
7d00: 804fdb80 80501a94 aded7800 af3ca010 aded7afc af3c9c60 adca7d94 adca7d28
7d20: 804e3518 804fdb20 00000000 af3c9b1c adca7d50 81506f44 00000000 8093c500
7d40: af3c9c6c ae4f2ca8 ae4f2c18 00000000 00000000 ae637f00 00000000 aded7800
7d60: 00000001 af3c9800 af23c300 ae77fcc0 ae4f2c18 00000001 af3c9800 8155a290
7d80: af1af700 adca6000 adca7db4 adca7d98 804fea6c 804e2de4 adca7e50 adb3d940
7da0: 00000001 af3c9800 adca7e24 adca7db8 8050440c 804fea0c ae77fcc0 00000003
7dc0: adca7e24 adb3d940 af1af700 ae77fcc0 ae77fccc ae4f2c18 8083d44c ae77fcc0
7de0: ae4002 80d03040 adca7e64 adca7e40 adca7e50 80503f08
7e40: 7ebd5630 adca7e50 00000068 c06864a2 7ebd5be8 00000000 00000001 00000018
7e60: 00000026 00000000 00000000 00000000 00000001 000115bc 05010500 05a0059f
7e80: 03200000 03360321 00000337 0000003c 00000000 00000040 30383231 30303878
7ea0: 00000000 00000000 00000000 00000000 00000000 00000000 80173058 80172e30
7ec0: 80d77d32 00004000 adf7d900 00000003 00000000 7ebd5630 af342bb0 adfe3b80
7ee0: 80272f50 00000003 adca6000 00000000 adca7f7c adca7f00 802725ec 804f52cc
7f00: 802809cc 80178450 00000000 00000000 80280880 80145904 adb3d8c0 adf7d990
7f20: ffffffff 00000003 00004000 01614c10 c06864a2 00000003 adca6000 00000000
7f40: adca7f6c adca7f50 80280b04 8028088c 000115bc adfe3b81 7ebd5630 adfe3b80
7f60: c06864a2 00000003 adca6000 00000000 adca7fa4 adca7f80 80272f50 80272548
7f80: 000115bc 00017050 00000001 01614c10 00000036 801089e4 00000000 adca7fa8
7fa0: 80108840 80272f18 00017050 00000001 00000003 c06864a2 7ebd5630 000115bc
7fc0: 00017050 00000001 01614c10 00000036 00000003 00000000 00000026 00000018
7fe0: 00016f38 7ebd562c 0000b5e9 76ef31e6 400c0030 00000003 ff5f37db bfe7dd4d
Backtrace:
[<80506038>] (drm_connector_cleanup) from [<80519104>] (dw_hdmi_connector_destroy+0x24/0x28)
r10:0000000f r9:adca7ddc r8:af3c9c6c r7:8155a290 r6:80501a88 r5:aded7820
r4:aded7800 r3:805190e0
[<805190e0>] (dw_hdmi_connector_destroy) from [<80501ac0>] (drm_connector_free+0x38/0x3c)
r4:aded7800 nreference) from [<804e3518>] (drm_crtc_helper_set_config+0x740/0xbf4)
r6:af3c9c60 r5:aded7afc r4:af3ca010 r3:aded7800
[<804e2dd8>] (drm_crtc_helper_set_config) from [<804fea6c>] (drm_mode_set_config_internal+0x6c/0xf4)
r10:adca6000 r9:af1af700 r8:8155a290 r7:af3c9800 r6:00000001 r5:ae4f2c18
r4:ae77fcc0
[<804fea00>] (drm_mode_set_config_internal) from [<8050440c>] (drm_mode_setcrtc+0x504/0x57c)
r7:af3c9800 r6:00000001 r5:adb3d940 r4:adca7e50
[<80503f08>] (drm_mode_setcrtc) from [<804f5404>] (drm_ioctl+0x144/0x4dc)
r10:ada2e000 r9:000000a2 r8:af3c9800 r7:8155a290 r6:809320b4 r5:00000051
r4:adca7e50
[<804f52c0>] (drm_ioctl) from [<802725ec>] (do_vfs_ioctl+0xb0/0x9d0)
r10:00000000 r9:adca6000 r8:00000003 r7:80272f50 r6:adfe3b80 r5:af342bb0
r4:7ebd5630
[<8027253c>] (do_vfs_ioctl) from [<80272f50>] (SyS_ioctl+0x44/0x6c)
r10:00000000 r9:adca6000 r8:00000003 r7:c06864a2 r6:adfe3b80 r5:7ebd5630
r4:adfe3b81
[<80272f0c>] (SyS_ioctl) from [<80108840>] (ret_fast_syscall+0x0/0x1c)
r8:801089e4 r7:00000036 r6:01614c10 r5:00000001 r4:00017050 r3:000115bc
Code: 0a00000c e5932004 e1a01003 e1a0a004 (e5842004)
---[ end trace 9a7257572ccacb16 ]---
Only the reference count of connectors that weren't previously bound to
an encoder should be incremented after a call to drm_crtc_helper_set_config.
And only the reference count of connectors that were previously bound to
an encoder and are unbound afterwards should ever be decremented.
The reference counts of the temporary copies in the save_connectors
should not be touched at all.
This patch fixes the above error by only incrementing the reference count
of those connectors in the set that are initially not bound to any encoder,
and also by restoring the reference count of only those connectors in the
set in the failure case.
"Note that this can only be hit when fbdev emulation is disabled, since
then the refcount drops from 1 to 0 and we call the connector destroy
functions on the backup copy, which eventually results in tears. With
fbdev emulation the refcount only goes down from 2 to 1 ever. And since we
unconditionally increment the refcount on the real object, the refcount of
that will slowly increase. The backup connector's refcount doesn't matter,
since we kfree() that either way in the end of
drm_crtc_helper_set_config()."
Fixes: 0955c1250e ("drm/crtc: take references to connectors used in a modeset. (v2)")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
"Pretty much all regression fixes, or black screens."
* tag 'drm-intel-fixes-2016-06-14' of git://anongit.freedesktop.org/drm-intel:
drm/i915/ilk: Don't disable SSC source if it's in use
drm/i915: Extract physical display dimensions from VBT
drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV
drm/i915: Only ignore eDP ports that are connected
drm/i915: Silence "unexpected child device config size" for VBT on 845g
drm/i915: Fix NULL pointer deference when out of PLLs in IVB
Thanks to Ville Syrjälä for pointing me towards the cause of this issue.
Unfortunately one of the sideaffects of having the refclk for a DPLL set
to SSC is that as long as it's set to SSC, the GPU will prevent us from
powering down any of the pipes or transcoders using it. A couple of
BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL
configurations. This causes issues on the first modeset, since we don't
expect SSC to be left on and as a result, can't successfully power down
the pipes or the transcoders using it. Here's an example from this Dell
OptiPlex 990:
[drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled
[drm:intel_modeset_init] 2 display pipes available.
[drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:intel_crt_reset] crt adpa set to 0xf40000
[drm:intel_dp_init_connector] Adding DP connector on port C
[drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
[drm:ironlake_init_pch_refclk] Disabling SSC entirely
… later we try committing the first modeset …
[drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A
[drm:intel_dump_pipe_config] cpu_transcoder: A
…
[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07
[drm:intel_dump_pipe_config] planes on this crtc
[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
[drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258
[drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600
[drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
[drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
[drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A
[drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
[drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A
[drm:intel_disable_pipe] disabling pipe A
------------[ cut here ]------------
WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915]
pipe_off wait timed out
…
---[ end trace 94fc8aa03ae139e8 ]---
[drm:intel_dp_link_down]
[drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A
Later modesets succeed since they reset the DPLL's configuration anyway,
but this is enough to get stuck with a big fat warning in dmesg.
A better solution would be to add refcounts for the SSC source, but for
now leaving the source clock on should suffice.
Changes since v4:
- Fix calculation of final for systems with LVDS panels (fixes BUG() on
CI test suite)
Changes since v3:
- Move temp variable into loop
- Move checks for using_ssc_source to after we've figured out has_ck505
- Add using_ssc_source to debug output
Changes since v2:
- Fix debug output for when we disable the CPU source
Changes since v1:
- Leave the SSC source clock on instead of just shutting it off on all
of the DPLL configurations.
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 2ba272d7bd.
The issue fixed by this patch is specific to compute rings and the
previous patch was enough. Additionally, this patch as been traced
to strange behavior on some CZ systems so we might as well drop it.
