Commit Graph

83 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
c532cc617e First set of IIO fixes for the 5.7 cycle.
Includes one MAINTAINERS update to avoid people getting a lot of bounce
 messages and complaining about it.
 
 * MAINTAINERS
   - Drop Stefan Popa's Analog Devices email address in favour of
     Michael Hennerich.
 * core
   - Fix handling of dB sysfs inputs.
   - Drop a stray semi colon in macro definition.
 * ad5770r
   - Fix an off by one in chec on maximum number of channels.
 * ad7192
   - Fix a null pointer de-reference due to the name previously being
     retrieved from the spi_get_device_id call which no longer works as
     the relevant table was removed.
 * ad7797
   - Use correct attribute group.
 * counter/104-quad-8
   - Add locks to prevent some race conditions.
 * inv-mpu6050
   - Fix issues around suspend / resume clashing with runtime PM.
 * stm32-adc
   - Fix sleep in invalid context
   - Fix id relative path error in device tree binding doc.
 * st_lsm6dsx
   - Fix a read alignment issue on an untagged FIFO.
   - Handle odr for slave to properly compute the FIFO data layout / pattern.
   - Flush the HW FIFO before resettting the device to avoid a race on
     interrupt line 1.
 * st_sensors
   - Rely on ODR mask not ODR address to identify if the ODR can be set.
     Some devices have an ODR address of 0.
 * ti-ads8344
   - Byte ordering was wrong - fix it.
 * xilinx-xadc
   - Fix inverted logic in powering down the second ADC.
   - Fix clearing interrupt when enabling the trigger.
   - Fix configuration of sequencer when in simultaneous sampling mode.
   - Limit initial sampling rate as done for runtime configured ones.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl6cgbkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj/qg//c1TF2fhXEuGNua2M9PzaO+UgEkymF5lD
 R9bQPOPLXesTxmIZDIPWuIYaoFOIBrB6Kc9DvE8+7apVc0I/JFYmuXSjY1LGoBj5
 6WSrbtfAHYD5HBY/ZQq92iw+feFlctWtpp7H6Ngy2c7lQy8OKMhrHOA1NgbC++HH
 5OA5uoMD7Fo0mvAGY7/74DiJFEKG/PUUrGWSbH792Mh0EmvXgyFkWyHEXCUrS6Qo
 gbaLk8mZsTac3iwYoLk7AdYyQpEdQD/tnCHpBzHHdTdDcQuKHbknP9t/zFuEkM/e
 hAH6H/cOr+IMOkMvYe1HDRQsOwkPQppz2GnxtWAUwCV8Shkn7khOExnV17zqUfJx
 NSzX60/iZWj53cAJkp4ZW4Uf6dqEEeCvV9jzWngXsCTRz96tpwJoLDilTEStSp1r
 0d17OpFSkrPoJQR6miK+wCeoA4CcLLfGJXG1BcDpsT0qgHq/TNx7P7AX55Ip//IL
 uu7qCDzFHAct8C50r1725pthsX/69PI34F8wHQ+bSt8eBlEMc/+iDavXO7MPvNNi
 Xd/Je0c+6pV15X9lCN7RqujDjBb2yMzX9f3Omq0txc4ughYGYb3QLwAfBidjW6Wy
 fI6AgBXOdqUOlFgq0ncDUVmS73AMfb2ilvstfY+cfhLrtGIzZNwin1znSIxcesaS
 tUGD9Xk/bPc=
 =SmJy
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.7 cycle.

Includes one MAINTAINERS update to avoid people getting a lot of bounce
messages and complaining about it.

* MAINTAINERS
  - Drop Stefan Popa's Analog Devices email address in favour of
    Michael Hennerich.
* core
  - Fix handling of dB sysfs inputs.
  - Drop a stray semi colon in macro definition.
* ad5770r
  - Fix an off by one in chec on maximum number of channels.
* ad7192
  - Fix a null pointer de-reference due to the name previously being
    retrieved from the spi_get_device_id call which no longer works as
    the relevant table was removed.
* ad7797
  - Use correct attribute group.
* counter/104-quad-8
  - Add locks to prevent some race conditions.
* inv-mpu6050
  - Fix issues around suspend / resume clashing with runtime PM.
* stm32-adc
  - Fix sleep in invalid context
  - Fix id relative path error in device tree binding doc.
* st_lsm6dsx
  - Fix a read alignment issue on an untagged FIFO.
  - Handle odr for slave to properly compute the FIFO data layout / pattern.
  - Flush the HW FIFO before resettting the device to avoid a race on
    interrupt line 1.
* st_sensors
  - Rely on ODR mask not ODR address to identify if the ODR can be set.
    Some devices have an ODR address of 0.
* ti-ads8344
  - Byte ordering was wrong - fix it.
* xilinx-xadc
  - Fix inverted logic in powering down the second ADC.
  - Fix clearing interrupt when enabling the trigger.
  - Fix configuration of sequencer when in simultaneous sampling mode.
  - Limit initial sampling rate as done for runtime configured ones.

* tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  MAINTAINERS: remove Stefan Popa's email
  iio: adc: ad7192: fix null pointer de-reference crash during probe
  iio: core: remove extra semi-colon from devm_iio_device_register() macro
  iio: adc: ti-ads8344: properly byte swap value
  iio: imu: inv_mpu6050: fix suspend/resume with runtime power
  iio: st_sensors: rely on odr mask to know if odr can be set
  iio: xilinx-xadc: Make sure not exceed maximum samplerate
  iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
  iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
  iio: xilinx-xadc: Fix ADC-B powerdown
  iio: dac: ad5770r: fix off-by-one check on maximum number of channels
  iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
  iio: core: Fix handling of 'dB'
  dt-bindings: iio: adc: stm32-adc: fix id relative path
  counter: 104-quad-8: Add lock guards - generic interface
  iio: imu: st_lsm6dsx: specify slave odr in slv_odr
  iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFO
  iio: adc: stm32-adc: fix sleep in atomic context
  iio:ad7797: Use correct attribute_group
2020-04-20 14:07:00 +02:00
Lars Engebretsen
a07479147b iio: core: remove extra semi-colon from devm_iio_device_register() macro
This change removes the semi-colon from the devm_iio_device_register()
macro which seems to have been added by accident.

Fixes: 63b19547cc ("iio: Use macro magic to avoid manual assign of driver_module")
Signed-off-by: Lars Engebretsen <lars@engebretsen.ch>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19 17:50:02 +01:00
Linus Torvalds
413a103cf6 chrome platform changes for 5.7
* cros-usbpd-notify and cros_ec_typec
 - Add a new notification driver that handles and dispatches USB PD
  related events to other drivers.
 - Add a Type C connector class driver for cros_ec
 
 * CrOS EC
 - Introduce a new cros_ec_cmd_xfer_status helper
 
 * Sensors/iio:
 - A series from Gwendal that adds Cros EC sensor hub FIFO support
 
 * Wilco EC
 - Fix a build warning.
 - Platform data shouldn't include kernel.h
 
 * Misc
 - i2c api conversion complete, with i2c_new_client_device instead of
  i2c_new_device in chromeos_laptop.
 - Replace zero-length array with flexible-array member in cros_ec_chardev
  and wilco_ec
 - Update new structure for SPI transfer delays in cros_ec_spi
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXo1lfQAKCRBzbaomhzOw
 wo6TAQCKHOcrqq5Y9HYXs1QBx8e/0vVwe5Jh76Qi6hUVqXu56QEA65lBZ2ni8Udp
 f6jQDFkaeYaF2tkghvuNoAkFRI6/rAk=
 =j4Tt
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:

  cros-usbpd-notify and cros_ec_typec:
   - Add a new notification driver that handles and dispatches USB PD
     related events to other drivers.
   - Add a Type C connector class driver for cros_ec

  CrOS EC:
   - Introduce a new cros_ec_cmd_xfer_status helper

  Sensors/iio:
   - A series from Gwendal that adds Cros EC sensor hub FIFO support

  Wilco EC:
   - Fix a build warning.
   - Platform data shouldn't include kernel.h

  Misc:
   - i2c api conversion complete, with i2c_new_client_device instead of
     i2c_new_device in chromeos_laptop.
   - Replace zero-length array with flexible-array member in
     cros_ec_chardev and wilco_ec
   - Update new structure for SPI transfer delays in cros_ec_spi

* tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
  platform/chrome: cros_ec_spi: Wait for USECS, not NSECS
  iio: cros_ec: Use Hertz as unit for sampling frequency
  iio: cros_ec: Report hwfifo_watermark_max
  iio: cros_ec: Expose hwfifo_timeout
  iio: cros_ec: Remove pm function
  iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  iio: expose iio_device_set_clock
  iio: cros_ec: Move function description to .c file
  platform/chrome: cros_ec_sensorhub: Add median filter
  platform/chrome: cros_ec_sensorhub: Add code to spread timestmap
  platform/chrome: cros_ec_sensorhub: Add FIFO support
  platform/chrome: cros_ec_sensorhub: Add the number of sensors in sensorhub
  platform/chrome: chromeos_laptop: make I2C API conversion complete
  platform/chrome: wilco_ec: event: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_chardev: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_typec: Update port info from EC
  platform/chrome: Add Type C connector class driver
  platform/chrome: cros_usbpd_notify: Pull PD_HOST_EVENT status
  platform/chrome: cros_usbpd_notify: Amend ACPI driver to plat
  platform/chrome: cros_usbpd_notify: Add driver data struct
  ...
2020-04-08 21:25:49 -07:00
Gwendal Grignou
69f0793eb6 iio: expose iio_device_set_clock
Some IIO devices may want to override the default (realtime) to another
clock source by default.

It can beneficial when timestamps coming from the hardware or underlying
drivers are already in that format.

It can always be overridden by attribute current_timestamp_clock.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28 22:04:32 +01:00
Alexandru Tachici
2ddc982a6c iio: industrialio-core: Fix debugfs read
Currently iio_debugfs_read_reg calls debugfs_reg_access
every time it is ran. Reading the same hardware register
multiple times during the same reading of a debugfs file
can cause unintended effects.

For example for each: cat iio:device0/direct_reg_access
the file_operations.read function will be called at least
twice. First will return the full length of the string in
bytes  and the second will return 0.

This patch makes iio_debugfs_read_reg to call debugfs_reg_access
only when the user's buffer position (*ppos) is 0. (meaning
it is the beginning of a new reading of the debugfs file).

Fixes: e553f182d5 ("staging: iio: core: Introduce debugfs support, add support for direct register access")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08 17:28:51 +00:00
Phil Reid
2c3d0c9ffd iio: core: Add optional symbolic label to device attributes
If a label is defined in the device tree for this device add that
to the device specific attributes. This is useful for userspace to
be able to identify an individual device when multiple identical
chips are present in the system.

Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-07 21:31:18 +01:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Andy Shevchenko
fb1589710e iio: Allow to read mount matrix from ACPI
Currently mount matrix is allowed in Device Tree, though there is
no technical issue to extend it to support ACPI.

Convert the function to use device_property_read_string_array() and
thus allow to read mount matrix from ACPI if available.

Example of use in _DSD method:

  Name (_DSD, Package ()
  {
     ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
     Package ()
     {
        Package () { "mount-matrix", Package() {
                "1", "0",     "0",
                "0", "0.866", "0.5",
                "0", "-0.5",  "0.866",
        } },
     }
  })

At the same time drop the "of" prefix from its name and
convert current users.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04 20:19:46 +01:00
Mauro Carvalho Chehab
04e7b3d7ea iio: iio.h: use nested struct support on kernel-doc markup
Solve those Sphinx warnings:

    ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.sign' not described in 'iio_chan_spec'
    ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.realbits' not described in 'iio_chan_spec'
    ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.storagebits' not described in 'iio_chan_spec'
    ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.shift' not described in 'iio_chan_spec'
    ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.repeat' not described in 'iio_chan_spec'
    ./include/linux/iio/iio.h:270: warning: Function parameter or member 'scan_type.endianness' not described in 'iio_chan_spec'

    ./include/linux/iio/iio.h:191: WARNING: Unexpected indentation.
    ./include/linux/iio/iio.h:192: WARNING: Block quote ends without a blank line; unexpected unindent.
    ./include/linux/iio/iio.h:198: WARNING: Definition list ends without a blank line; unexpected unindent.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-07 18:18:18 +01:00
Linus Torvalds
5d8515bc23 Staging/IIO patches for 4.16-rc1
Here is the big Staging and IIO driver patches for 4.16-rc1.
 
 There is the normal amount of new IIO drivers added, like all releases.
 
 The networking IPX and the ncpfs filesystem are moved into the staging
 tree, as they are on their way out of the kernel due to lack of use
 anymore.
 
 The visorbus subsystem finall has started moving out of the staging tree
 to the "real" part of the kernel, and the most and fsl-mc codebases are
 almost ready to move out, that will probably happen for 4.17-rc1 if all
 goes well.
 
 Other than that, there is a bunch of license header cleanups in the
 tree, along with the normal amount of coding style churn that we all
 know and love for this codebase.  I also got frustrated at the
 Meltdown/Spectre mess and took it out on the dgnc tty driver, deleting
 huge chunks of it that were never even being used.
 
 Full details of everything is in the shortlog.
 
 All of these patches have been in linux-next for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLxoA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yk4vgCgjeMlwhtar65DIticIRj626EFxiQAnjGmH8Kd
 d9Xz2Piq8X47uSsC/6AE
 =xxMT
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big Staging and IIO driver patches for 4.16-rc1.

  There is the normal amount of new IIO drivers added, like all
  releases.

  The networking IPX and the ncpfs filesystem are moved into the staging
  tree, as they are on their way out of the kernel due to lack of use
  anymore.

  The visorbus subsystem finall has started moving out of the staging
  tree to the "real" part of the kernel, and the most and fsl-mc
  codebases are almost ready to move out, that will probably happen for
  4.17-rc1 if all goes well.

  Other than that, there is a bunch of license header cleanups in the
  tree, along with the normal amount of coding style churn that we all
  know and love for this codebase. I also got frustrated at the
  Meltdown/Spectre mess and took it out on the dgnc tty driver, deleting
  huge chunks of it that were never even being used.

  Full details of everything is in the shortlog.

  All of these patches have been in linux-next for a while with no
  reported issues"

* tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (627 commits)
  staging: rtlwifi: remove redundant initialization of 'cfg_cmd'
  staging: rtl8723bs: remove a couple of redundant initializations
  staging: comedi: reformat lines to 80 chars or less
  staging: lustre: separate a connection destroy from free struct kib_conn
  Staging: rtl8723bs: Use !x instead of NULL comparison
  Staging: rtl8723bs: Remove dead code
  Staging: rtl8723bs: Change names to conform to the kernel code
  staging: ccree: Fix missing blank line after declaration
  staging: rtl8188eu: remove redundant initialization of 'pwrcfgcmd'
  staging: rtlwifi: remove unused RTLHALMAC_ST and RTLPHYDM_ST
  staging: fbtft: remove unused FB_TFT_SSD1325 kconfig
  staging: comedi: dt2811: remove redundant initialization of 'ns'
  staging: wilc1000: fix alignments to match open parenthesis
  staging: wilc1000: removed unnecessary defined enums typedef
  staging: wilc1000: remove unnecessary use of parentheses
  staging: rtl8192u: remove redundant initialization of 'timeout'
  staging: sm750fb: fix CamelCase for dispSet var
  staging: lustre: lnet/selftest: fix compile error on UP build
  staging: rtl8723bs: hal_com_phycfg: Remove unneeded semicolons
  staging: rts5208: Fix "seg_no" calculation in reset_ms_card()
  ...
2018-02-01 09:51:57 -08:00
Arnaud Pouliquen
34739a213d
IIO: inkern: API for manipulating channel attributes
Extend the inkern API with functions for reading and writing
attribute of iio channels.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10 10:30:08 +00:00
Tobin C. Harding
08e2e51f9a iio: fix SPHINX kernel-docs build warning
When building kernel documentation sphinx emits the following warnings

No description found for parameter 'iio_dev'
Excess function parameter 'indio_dev' description in 'iio_device_register'

These warnings are caused by a macro with a different argument identifier to the
one listed in the kernel-docs.

Change macro argument to be the same as the docs.

Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08 16:03:42 +01:00
Lukas Wunner
e0005bd93a iio: Drop duplicate forward declaration
Commit 5f420b4207 ("staging:iio: Add extended IIO channel info") added
a forward declaration for struct iio_dev to <linux/iio/iio.h> but forgot
to remove an existing forward declaration further down originating from
commit 7ae8cf6275 ("staging: iio: chrdev.h rationalization").

Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-14 18:29:20 +01:00
Greg Kroah-Hartman
069f0e0c06 Round one of new device support, features and cleanup for IIO in the 4.15 cycle.
Note there is a misc driver drop in here given we have support
 in IIO and the feeling is no one will care.
 
 A large part of this series is a boiler plate removal series avoiding
 the need to explicitly provide THIS_MODULE in various locations.
 It's very dull but touches all drivers.
 
 New device support
 * ad5446
   - add ids to support compatible parts DAC081S101, DAC101S101,
     DAC121S101.
   - add the dac7512 id and drop the misc driver as feeling is no
     one is using it (was introduced for a board that is long obsolete)
 * mt6577
   - add bindings for mt2712 which is fully compatible with other
     supported parts.
 * st_pressure
   - add support for LPS33HW and LPS35HW with bindings (ids mostly).
 
 New features
 * ccs811
   - Add support for the data ready trigger.
 * mma8452
   - remove artifical restriction on supporting multiple event types
     at the same time.
 * tcs3472
   - support out of threshold events
 
 Core and tree wide cleanup
 * Use macro magic to remove the need to provide THIS_MODULE as part of
   struct iio_info or struct iio_trigger_ops.  This is similar to
   work done in a number of other subsystems (e.g. i2c, spi).
 
   All drivers are fixed and then the fields in these structures are
   removed.
 
   This will cause build failures for out of tree drivers and any
   new drivers that cross with this work going into the kernel.
 
   Note mostly done with a coccinelle patch, included in the series
   on the mailing list but not merged as the fields no longer exist
   in the structures so the any hold outs will cause a build failure.
 
 Cleanups
 * ads1015
   - avoid writing config register when it doesn't change.
   - add 10% to conversion wait time as it seems it is sometimes
     a little small.
 * ade7753
   - replace use of core mlock with a local lock.  This is part of a
     long term effort to make the use of mlock opaque and single
     purpose.
 * ade7759
   - expand the use of buf_lock to cover previous mlock cases.  This
     is a slightly nicer solution to the same issue as in ade7753.
 * cros_ec
   - drop an unused variable
 * inv_mpu6050
   - add a missing break in a switch for consistency - not actual
     bug,
   - make some local arrays static to save on object code size.
 * max5481
   - drop manual setting of the spi module owner as handled by the
     spi core.
 * max5487
   - drop manual setting of the spi module owner as handled by the
     spi core.
 * max9611
   - drop explicit setting of the i2c module owner as handled by
     the i2c core.
 * mcp320x
   - speed up reads on single channel devices,
   - drop unused of_device_id data elements,
   - document the struct mcp320x,
   - improve binding docs to reflect restrictions on spi setup and
     to make it explicit that the reference regulator is needed.
 * mma8452
   - symbolic to octal permissions,
   - unsigned to unsigned int.
 * st_lsm6dsx
   - avoid setting odr values multiple times,
   - drop config of LIR as it is only ever set to the existing
     defaults,
   - drop rounding configuration as it only ever matches the defaults.
 * ti-ads8688
   - drop manual setting of the spi module owner as handled by the
     spi core.
 * tsl2x7x
   - constify the i2c_device_id,
   - cleanup limit checks to avoid static checker warnings (and generally
     have nicer code).
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlnH4XkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Fogkaw//e3z+4TQT2Hn+550lBYUV8pBR5emDiSe3
 0QTG+ZS7Kh+fPYENLCXtW9ttZicmUSqkTQFvlMTjAxHyj9XzL7+BXS9UlNgVLsqX
 pn9KprPj31lrXpJOXMSgcdiqWMZLtCvprAJgnwfZt1GevS3WbCMmnnoaBuJV61jp
 w0VD+forukTGF7b0OMGB0d5mwtYS0bJYqXRRMPD+2bNeM4hqt5YM3+wHSqP35t3l
 MoaqKlbx7ZtKDF4zIa59nKNP7Ky7IByWogLZRlJ/vD/uKrACckPT22+KT8rX2TwA
 NpZb1Oy/KZBTl5D9iRjZADq4NaRJENFXJiG6GkjoGjrQhUqHaCinHWpLioqLGlRq
 qCPL2nRjqm4Qr7E8sxlwR1Ajlg0utBMY7Oflym/XJMMLF/ZE6HSrzyrxuVMG2EjV
 T7SVIncbfg6kyr/r4kKsAT3BUMV+TdO4sXm+JgphZBUqZLp0nFHnmjP7Rm2j2uWq
 +yLrSuF25RijrRj3sp28zg9dFWlRwRvZvcAx8kEGm1kMjMWr+Q10xTK9o/5LlFEw
 57sUm6qgmigPK8sahDtcdLIwaCPVvAYvJ0e4Mfw5UsPSlZmHmM1mLwjpwiXBZ5ig
 oxnJmTXsn5RcOGiW/mg0VCH26NkBx7H0fsRqQeq9wkxHLrm75vXroIn7YqRIg+Ad
 /Itu6x6fOIg=
 =ik5C
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Round one of new device support, features and cleanup for IIO in the 4.15 cycle.

Note there is a misc driver drop in here given we have support
in IIO and the feeling is no one will care.

A large part of this series is a boiler plate removal series avoiding
the need to explicitly provide THIS_MODULE in various locations.
It's very dull but touches all drivers.

New device support
* ad5446
  - add ids to support compatible parts DAC081S101, DAC101S101,
    DAC121S101.
  - add the dac7512 id and drop the misc driver as feeling is no
    one is using it (was introduced for a board that is long obsolete)
* mt6577
  - add bindings for mt2712 which is fully compatible with other
    supported parts.
* st_pressure
  - add support for LPS33HW and LPS35HW with bindings (ids mostly).

New features
* ccs811
  - Add support for the data ready trigger.
* mma8452
  - remove artifical restriction on supporting multiple event types
    at the same time.
* tcs3472
  - support out of threshold events

Core and tree wide cleanup
* Use macro magic to remove the need to provide THIS_MODULE as part of
  struct iio_info or struct iio_trigger_ops.  This is similar to
  work done in a number of other subsystems (e.g. i2c, spi).

  All drivers are fixed and then the fields in these structures are
  removed.

  This will cause build failures for out of tree drivers and any
  new drivers that cross with this work going into the kernel.

  Note mostly done with a coccinelle patch, included in the series
  on the mailing list but not merged as the fields no longer exist
  in the structures so the any hold outs will cause a build failure.

Cleanups
* ads1015
  - avoid writing config register when it doesn't change.
  - add 10% to conversion wait time as it seems it is sometimes
    a little small.
* ade7753
  - replace use of core mlock with a local lock.  This is part of a
    long term effort to make the use of mlock opaque and single
    purpose.
* ade7759
  - expand the use of buf_lock to cover previous mlock cases.  This
    is a slightly nicer solution to the same issue as in ade7753.
* cros_ec
  - drop an unused variable
* inv_mpu6050
  - add a missing break in a switch for consistency - not actual
    bug,
  - make some local arrays static to save on object code size.
* max5481
  - drop manual setting of the spi module owner as handled by the
    spi core.
* max5487
  - drop manual setting of the spi module owner as handled by the
    spi core.
* max9611
  - drop explicit setting of the i2c module owner as handled by
    the i2c core.
* mcp320x
  - speed up reads on single channel devices,
  - drop unused of_device_id data elements,
  - document the struct mcp320x,
  - improve binding docs to reflect restrictions on spi setup and
    to make it explicit that the reference regulator is needed.
* mma8452
  - symbolic to octal permissions,
  - unsigned to unsigned int.
* st_lsm6dsx
  - avoid setting odr values multiple times,
  - drop config of LIR as it is only ever set to the existing
    defaults,
  - drop rounding configuration as it only ever matches the defaults.
* ti-ads8688
  - drop manual setting of the spi module owner as handled by the
    spi core.
* tsl2x7x
  - constify the i2c_device_id,
  - cleanup limit checks to avoid static checker warnings (and generally
    have nicer code).
2017-09-25 12:56:37 +02:00
Jonathan Cameron
97623c0a80 iio: drop iio_info.driver_module and iio_trigger_ops.owner.
The equivalents are now assigned automatically in the relevant
registration calls and so are not needed in these operations
structures.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-09-03 18:10:24 +01:00
Jonathan Cameron
63b19547cc iio: Use macro magic to avoid manual assign of driver_module
Starting point in boiler plate reduction similar to that done for
many similar cases elsewhere in the kernel.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-22 20:03:14 +01:00
Jonathan Corbet
f00fd7ae4f PATCH] iio: Fix some documentation warnings
The kerneldoc description for the trig_readonly field of struct iio_dev
lacked a colon, leading to this doc build warning:

  ./include/linux/iio/iio.h:603: warning: No description found for parameter 'trig_readonly'

A similar issue for iio_trigger_set_immutable() in trigger.h yielded:

  ./include/linux/iio/trigger.h:151: warning: No description found for parameter 'indio_dev'
  ./include/linux/iio/trigger.h:151: warning: No description found for parameter 'trig'

Fix the formatting and silence the warnings.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20 15:21:46 +01:00
Benjamin Gaignard
d89e119a08 iio: add hardware triggered operating mode
Devices, like stm32 timer, could be triggered by hardware events which
are not buffer or software events. However it could be necessary to
validate the triggers like it is done for buffer or event triggered modes.
This patch add a new INDIO_HARDWARE_TRIGGERED operating mode for this
kind of devices and allow this mode to register trigger consumer.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:58:41 +01:00
Peter Rosin
00c5f80c2f iio: inkern: add helpers to query available values from channels
Specifically a helper for reading the available maximum raw value of a
channel and a helper for forwarding read_avail requests for raw values
from one iio driver to an iio channel that is consumed.

These rather specific helpers are in turn built with generic helpers
making it easy to build more helpers for available values as needed.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13 11:40:26 +00:00
Jonathan Cameron
5123960007 iio:core: add a callback to allow drivers to provide _available attributes
A large number of attributes can only take a limited range of values.
Currently in IIO this is handled by directly registering additional
*_available attributes thus providing this information to userspace.

It is desirable to provide this information via the core for much the same
reason this was done for the actual channel information attributes in the
first place.  If it isn't there, then it can only really be accessed from
userspace.  Other in kernel IIO consumers have no access to what valid
parameters are.

Two forms are currently supported:
* list of values in one particular IIO_VAL_* format.
	e.g. 1.300000 1.500000 1.730000
* range specification with a step size:
	e.g. [1.000000 0.500000 2.500000]
	equivalent to 1.000000 1.5000000 2.000000 2.500000

An addition set of masks are used to allow different sharing rules for the
*_available attributes generated.

This allows for example:

in_accel_x_offset
in_accel_y_offset
in_accel_offset_available.

We could have gone with having a specification for each and every
info_mask element but that would have meant changing the existing userspace
ABI.  This approach does not.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
[forward ported, added some docs and fixed buffer overflows /peda]
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13 11:40:25 +00:00
Bhumika Goyal
a9a0d64a8b iio: Declare event_attrs field of iio_info structure as const
The event_attrs field of iio_info structure is only initialized once
whenever an object of iio_info is created. After that this field
is never modified again anywhere in the kernel. So, declare event_attrs
field of iio_info as a const struct attribute_group.
Checked for occurences throughout the kernel using grep and
coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-01 14:37:35 +01:00
Gregor Boirie
70e483487d iio: add resource managed triggered buffer init helpers
Add resource managed devm_iio_triggered_buffer_setup() and
devm_iio_triggered_buffer_cleanup() to automatically clean up triggered
buffers setup by IIO drivers, thus leading to simplified IIO drivers code.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-04 15:42:46 +01:00
Matt Ranostay
c8cdf70890 iio: trigger: allow immutable triggers to be assigned
There are times when an assigned trigger to a device shouldn't ever
change after intialization.

Examples of this being used is when an provider device has a trigger
that is assigned to an ADC, which uses it populate data into a callback
buffer.

Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 15:31:55 +01:00
Gregor Boirie
bc2b7dab62 iio:core: timestamping clock selection support
Adds a new per-device sysfs attribute "current_timestamp_clock" to allow
userspace to select a particular POSIX clock for buffered samples and
events timestamping.

Following clocks, as listed in clock_gettime(2), are supported:
CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW,
CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and
CLOCK_TAI.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Acked-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30 19:41:38 +01:00
Gregor Boirie
dfc57732ad iio:core: mounting matrix support
Expose a rotation matrix to indicate userspace the chip placement with
respect to the overall hardware system. This is needed to adjust
coordinates sampled from a sensor chip when its position deviates from the
main hardware system.

Final coordinates computation is delegated to userspace since:
* computation may involve floating point arithmetics ;
* it allows an application to combine adjustments with arbitrary
  transformations.

This 3 dimentional space rotation matrix is expressed as 3x3 array of
strings to support floating point numbers. It may be retrieved from a
"[<dir>_][<type>_]mount_matrix" sysfs attribute file. It is declared into a
device / driver specific DTS property or platform data.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-23 22:13:05 +01:00
Alison Schofield
08a3380551 iio: core: implement iio_device_{claim|release}_direct_mode()
It is often the case that the driver wants to be sure a device stays
in direct mode while it is executing a task or series of tasks.  To
accomplish this today, the driver performs this sequence: 1) take the
device state lock, 2) verify it is not in a buffered mode, 3) execute
some tasks, and 4) release that lock.

This patch introduces a pair of helper functions that simplify these
steps and make it more semantically expressive.

iio_device_claim_direct_mode()
        If the device is not in any buffered mode it is guaranteed
        to stay that way until iio_release_direct_mode() is called.

iio_device_release_direct_mode()
        Release the claim. Device is no longer guaranteed to stay
        in direct mode.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-12 11:17:19 +00:00
William Breathitt Gray
3347a0656e iio: Fix typos in the struct iio_event_spec documentation comments
This patch fixes a few minor typos in the documentation comments for the
scan_type member of the iio_event_spec structure. The sign member name
was improperly capitalized as "Sign" in the comments. The storagebits
member name was improperly listed as "storage_bits" in the comments. The
endianness member entry in the comments was moved after the repeat
member entry in order to maintain consistency with the actual struct
iio_event_spec layout.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-17 21:11:08 +00:00
Daniel Baluta
0118de7b4c iio: Fix documentation for iio_dev mlock
mlock *must* be used by core and drivers to protect access
to devices state changes.

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-08 18:34:32 +00:00
Andrew F. Davis
7d2c2acac5 iio: Make IIO value formating function globally available.
Make IIO value formating function globally available to allow IIO drivers
to output values as the core does.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-22 17:04:56 +00:00
Vladimir Barinov
735ad074ff iio: Support triggered events
Support triggered events.

This is useful for chips that don't have their own interrupt sources.
It allows to use generic/standalone iio triggers for those drivers.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-27 20:47:09 +01:00
Lars-Peter Clausen
c689a923c8 iio: Add inverse unit conversion macros
Add inverse unit conversion macro to convert from standard IIO units to
units that might be used by some devices.

Those are useful in combination with scale factors that are specified as
IIO_VAL_FRACTIONAL. Typically the denominator for those specifications will
contain the maximum raw value the sensor will generate and the numerator
the value it maps to in a specific unit. Sometimes datasheets specify those
in different units than the standard IIO units (e.g. degree/s instead of
rad/s) and so we need to do a unit conversion.

From a mathematical point of view it does not make a difference whether we
apply the unit conversion to the numerator or the inverse unit conversion
to the denominator since (x / y) / z = x / (y * z). But as the denominator
is typically a larger value and we are rounding both the numerator and
denominator to integer values using the later method gives us a better
precision (E.g. the relative error is smaller if we round 8000.3 to 8000
rather than rounding 8.3 to 8).

This is where in inverse unit conversion macros will be used.

Marked for stable as used by some upcoming fixes.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:50:40 +01:00
Martin Fuzzey
3f7f642b9b iio: core: add high pass filter attributes
Add a high pass filter attribute for measurements
(like the existing low pass)

Also add both high and low pass attributes for events.

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 10:32:35 +01:00
Irina Tirdea
faaa44955d iio: core: Introduce IIO_CHAN_INFO_OVERSAMPLING_RATIO
Some magnetometers can perform a number of repetitions in HW
for each measurement to increase accuracy. One example is
Bosch BMC150:
http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf.

Introduce an interface to set the oversampling ratio
for these devices.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-10 20:31:44 +01:00
Vianney le Clément de Saint-Marcq
c8a8585431 iio: core: Introduce IIO_CHAN_INFO_CALIBEMISSIVITY
Contact-less IR temperature sensors measure the temperature of an object
by using its thermal radiation.  Surfaces with different emissivity
ratios emit different amounts of energy at the same temperature.

IIO_CHAN_INFO_CALIBEMISSIVITY allows the user to inform the sensor of the
emissivity of the object in front of it, in order to effectively measure
its temperature.

A device providing such setting is Melexis's MLX90614:
http://melexis.com/Assets/IR-sensor-thermometer-MLX90614-Datasheet-5152.aspx.

Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-09 15:03:05 +01:00
Octavian Purdila
f4f4673b75 iio: add support for hardware fifo
Some devices have hardware buffers that can store a number of samples
for later consumption. Hardware usually provides interrupts to notify
the processor when the FIFO is full or when it has reached a certain
watermark level. This helps with reducing the number of interrupts to
the host processor and thus it helps decreasing the power consumption.

This patch enables usage of hardware FIFOs for IIO devices in
conjunction with software device buffers. When the hardware FIFO is
enabled the samples are stored in the hardware FIFO. The samples are
later flushed to the device software buffer when the number of entries
in the hardware FIFO reaches the hardware watermark or when a flush
operation is triggered by the user when doing a non-blocking read
on an empty software device buffer.

In order to implement hardware FIFO support the device drivers must
implement the following new operations: setting and getting the
hardware FIFO watermark level, flushing the hardware FIFO to the
software device buffer. The device must also expose information about
the hardware FIFO such it's minimum and maximum watermark and if
necessary a list of supported watermark values. Finally, the device
driver must activate the hardware FIFO when the device buffer is
enabled, if the current device settings allows it.

The software device buffer watermark is passed by the IIO core to the
device driver as a hint for the hardware FIFO watermark. The device
driver can adjust this value to allow for hardware limitations (such
as capping it to the maximum hardware watermark or adjust it to a
value that is supported by the hardware). It can also disable the
hardware watermark (and implicitly the hardware FIFO) it this value is
below the minimum hardware watermark.

Since a driver may support hardware FIFO only when not in triggered
buffer mode (due to different semantics of hardware FIFO sampling and
triggered sampling) this patch changes the IIO core code to allow
falling back to non-triggered buffered mode if no trigger is enabled.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-29 16:17:10 +01:00
Irina Tirdea
2f0ecb7c65 iio: core: Introduce IIO_CHAN_INFO_DEBOUNCE_COUNT and _TIME
The pedometer needs to filter out false steps that might be generated by
tapping the foot, sitting, etc. To do that it computes the number of
steps that occur in a given time and decides the user is moving only
if this value is over a threshold. E.g.: the user starts moving only
if he takes 4 steps in 3 seconds. This filter is applied only when
the user starts moving.

A device that has such pedometer functionality is Freescale's MMA9553L:
http://www.freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf.

To export this feature, this patch introduces IIO_CHAN_INFO_DEBOUNCE_COUNT
and IIO_CHAN_INFO_DEBOUNCE_TIME. For the pedometer, in_steps_debounce_count
will specify the number of steps that need to occur in
in_steps_debounce_time seconds so that the pedometer decides the user is
moving.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-29 18:49:57 +00:00
Irina Tirdea
d37f6836fa iio: core: Introduce IIO_CHAN_INFO_CALIBWEIGHT
Some devices need the weight of the user to compute other
parameters. One of this devices is Freescale's MMA9553L
(http://www.freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf)
that needs the weight of the user to compute the number of calories burnt.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-27 18:49:54 +00:00
Karol Wrona
03af03ad7c iio: Add new operating mode for non triggered sw buffers
There was a need for non triggered software buffer type.  It can be used when
triggered model does not fit and INDIO_BUFFER_HARDWARE causes confusion because
the data stream can be obtained not directly form hardware backend.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Karol Wrona <k.wrona@samsung.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-25 22:53:38 +00:00
Irina Tirdea
bcdf28fb1b iio: core: Introduce IIO_CHAN_INFO_CALIBHEIGHT
Some devices need the height of the user to compute various
parameters. One of this devices is Freescale's MMA9553L
(http://www.freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf)
that needs the height of the user to compute the stride length which
is used further to determine distance, speed and activity type.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-22 11:05:56 +00:00
Irina Tirdea
a88bfe7858 iio: core: Introduce STEPS channel, ENABLE mask and INSTANCE event
These changes are needed to support the functionality of a pedometer.
A pedometer has two basic functionalities: step counter and step detector.

The step counter needs to be enabled and then it will count the steps
in its hardware register. Whenever the application needs to check
the step count, it will read the step counter register. To support the
step counter a new channel type STEPS is added. Since the pedometer needs
to be enabled first so that the hardware can count and store the steps,
we need a specific ENABLE channel info mask.

The step detector will generate an interrupt each time a step is detected.
To support this functionality we add a new event type INSTANCE.

For more information on the Android requirements for step counter and step
detector see:
http://source.android.com/devices/sensors/composite_sensors.html#counter
and http://source.android.com/devices/sensors/composite_sensors.html#detector.

A device that has the pedometer functionality this interface needs to
support is Freescale's MMA9553L:
http://www.freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-22 11:05:51 +00:00
Ivan T. Ivanov
acd8256723 iio: inkern: Add of_xlate function to struct iio_info
When #iio-cells is greater than '0', the driver could provide
a custom of_xlate function that reads the *args* and returns
the appropriate index in registered IIO channels array.

Add simple translation function, suitable for the most 1:1
mapped channels in IIO chips, and use it when driver did not
provide custom implementation.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-25 11:03:40 +01:00
Thomas Gleixner
fb31cc153d iio: Use ktime_get_real_ns()
No idea why iio needs wall clock based time stamps, but we can avoid
the timespec conversion dance by using the new interfaces.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-23 15:01:45 -07:00
Srinivas Pandruvada
0ee8546ac0 IIO: core: Modify scan element type
The current scan element type uses the following format:
  [be|le]:[s|u]bits/storagebits[>>shift].
To specify multiple elements in this type, added a repeat value.
So new format is:
  [be|le]:[s|u]bits/storagebitsXr[>>shift].
Here r is specifying how may times, real/storage bits are repeating.

When X is value is 0 or 1, then repeat value is not used in the format,
and it will be same as existing format.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-29 22:07:11 +01:00
Srinivas Pandruvada
9fbfb4b37e IIO: core: Introduce read_raw_multi
This callback is introduced to overcome some limitations of existing
read_raw callback. The functionality of both existing read_raw and
read_raw_multi is similar, both are used to request values from the
device. The current read_raw callback allows only two return values.
The new read_raw_multi allows returning multiple values. Instead of
passing just address of val and val2, it passes length and pointer
to values. Depending on the type and length of passed buffer, iio
client drivers can return multiple values.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-29 22:05:32 +01:00
Jonathan Cameron
07d4655b41 iio:drop IIO_ST macro
This macro no longer allows all the elements of the scan_type structure
to be set.  Missinterpretation of the parameters also caused a couple of
recent bugs.  No mainline drivers now use this macro so drop it.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-15 10:58:17 +00:00
Lars-Peter Clausen
cb955852a4 iio: Remove support for the legacy event config interface
Now that all drivers have been converted to the new event config interface we
can remove for the legacy event config interface. Also drop the '_new' suffix
for the event config interface callbacks, since those are the only callbacks
now.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-08 13:13:52 +00:00
Sachin Kamat
a7e57dce02 iio: core: Move kernel doc to the right location
Documentation related to function should be placed above
its implementation. Move it accordingly.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-24 21:07:11 +00:00
Sachin Kamat
8caa07c0e5 iio: core: Implement devm_iio_device_{register,unregister}
Add device managed devm_iio_device_{register,unregister}()
to automatically unregister IIO drivers thus leading to
simplified IIO driver code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-24 21:07:09 +00:00
Lars-Peter Clausen
b4e3ac0a20 iio: Extend the event config interface
The event configuration interface of the IIO framework has not been getting the
same attention as other parts. As a result it has not seen the same improvements
as e.g. the channel interface has seen with the introduction of the channel spec
struct. Currently all the event config callbacks take a u64 (the so called event
code) to pass all the different information about for which event the callback
is invoked. The callback function then has to extract the information it is
interested in using some macros with rather long names. Most information encoded
in the event code comes straight from the iio_chan_spec struct the event was
registered for. Since we always have a handle to the channel spec when we call
the event callbacks the first step is to add the channel spec as a parameter to
the event callbacks. The two remaining things encoded in the event code are the
type and direction of the event. Instead of passing them in one parameter, add
one parameter for each of them and remove the eventcode from the event
callbacks. The patch also adds a new iio_event_info parameter to the
{read,write}_event_value callbacks. This makes it possible, similar to the
iio_chan_info_enum for channels, to specify additional properties other than
just the value for an event. Furthermore the new interface will allow to
register shared events. This is e.g. useful if a device allows configuring a
threshold event, but the threshold setting is the same for all channels.

To implement this the patch adds a new iio_event_spec struct which is similar to
the iio_chan_spec struct. It as two field to specify the type and the direction
of the event. Furthermore it has a mask field for each one of the different
iio_shared_by types. These mask fields holds which kind of attributes should be
registered for the event. Creation of the attributes follows the same rules as
the for the channel attributes. E.g. for the separate_mask there will be a
attribute for each channel with this event, for the shared_by_type there will
only be one attribute per channel type. The iio_chan_spec struct gets two new
fields, 'event_spec' and 'num_event_specs', which is used to specify which the
events for this channel. These two fields are going to replace the channel's
event_mask field.

For now both the old and the new event config interface coexist, but over the
few patches all drivers will be converted from the old to the new interface.
Once that is done all code for supporting the old interface will be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-12 12:32:19 +01:00
Jonathan Cameron
c006ec8384 iio: add info_mask_[shared_by_dir/shared_by_all]
These two additional info_mask bitmaps should allow all 'standard'
numeric attributes to be handled using the read_raw and write_raw
callbacks.  Whilst this should reduce code, the more important element
is that this makes these values easily accessible to in kernel users
of IIO devices.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2013-09-15 17:45:49 +01:00