mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 16:07:11 +07:00
a6aace62f2
1804 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Greg Kroah-Hartman
|
7dc074348e |
Merge 4.19-rc4 into staging-next
Handle the merge issues and take the iio and staging driver fixes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Marek Marczykowski-Górecki
|
197ecb3802 |
xen/balloon: add runtime control for scrubbing ballooned out pages
Scrubbing pages on initial balloon down can take some time, especially in nested virtualization case (nested EPT is slow). When HVM/PVH guest is started with memory= significantly lower than maxmem=, all the extra pages will be scrubbed before returning to Xen. But since most of them weren't used at all at that point, Xen needs to populate them first (from populate-on-demand pool). In nested virt case (Xen inside KVM) this slows down the guest boot by 15-30s with just 1.5GB needed to be returned to Xen. Add runtime parameter to enable/disable it, to allow initially disabling scrubbing, then enable it back during boot (for example in initramfs). Such usage relies on assumption that a) most pages ballooned out during initial boot weren't used at all, and b) even if they were, very few secrets are in the guest at that time (before any serious userspace kicks in). Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also enabled by default), controlling default value for the new runtime switch. Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> |
||
Greg Kroah-Hartman
|
4b55dce8b0 |
1st round of IIO new device support, features and cleanups in the 4.20 cycle.
There is a merge commit in here to pull in regmap support for repeatedly reading the same register (to read out FIFOs). Used by the adxl372 driver. This will find uses elsewhere once we tidy up various drivers that are effectively doing this and relying on not enabling regcache. New device support * Analog devices ADXL372 accelerometer - new driver for this accelerometer including fifo and and interrupt support. Follow up patches enforce trigger validation, add sampling frequency control and filter bandwidth control. A later series added i2c support to the existing SPI support. * ST lsm6dsx - rework and add support fo the LSM6DSO 6 axis mems sensor. * Linear LTC 1660 DAC - new driver supporting the LTC 1660 and LTC 1665 SPI DACs. * Microchip mcp3911 ADC. - new driver for this integrated analog front end and ADC. * Qualcomm SPMI PMIC5 adc driver - using the spmi framework, new driver and bindings for this ADC. Follow up patch adds some missing channels. Features * ad5758 - support hard reset using a gpio (if provided). * mpu6050 - Regulator support * qcom-spmi-adc5 - Sanity check the channel numbers provided by DT to make sure the driver actually knows about them. * sc27xx - give raw data for channel 20 as it's used on all known boards for the headset which needs a custom converstion function. If it turns out someone builds a board where this isn't true we will deal with it when it happens. - add ADC scale calibration. * tsl2772 - support device tree binding to set the proximity led settings. - regulator supprot. - binding for apds9930 - trivial addition as register compatible with tsl2772. Cleanups / Minor fixes * adxl345 - supress a static checker warning but explicitly checking if the id object is null. * bh1750 - avoid CONFIG_PM_SLEEP checks. - SPDX. * bme680 - spelling mistake - use clamp rather than open coding. - white space and other similar fixes. - rename MSK to MASK for clarifty and use GENMASK to specify them. - use the FIELD_GET macro rather than a very odd accessor of dividing by 16 to get the shift. - rework to share handing for oversampling of the various channels in a unified way. - check explicitly for val2 in write_raw function to ensure it is 0. - drop some field defines that don't add anything. * dpot-adc - SPDX * envelope detector - SPDX * isl29501 - fix an ancient compiler warning mostly because it results in much nicer code. * max30102 - mark switch fall throughs. * max44000 - drop an unused variable. * max512 - avoid CONFIG_PM_SLEEP checks. * max5481 - use of_device_get_match_data rather than open coding it. * max5821 - avoid CONFIG_PM_SLEEP checks. * max9611 - explicity cast an enum to an integer to make it totally clear that this is intended. * mcp4018 - fix an inconsistent MODULE_LICENSE. - use of_device_get_match_data rather than open coding it. * mcp4531 - use of_device_get_match_data rather than open coding it. - SPDX * mcp4725 - avoid CONFIG_PM_SLEEP checks. * mcp4922 - Fix error handling and prevent writing a negative to when setting the output voltage. * ms5611 - drop deprecated compatible strings without manufacturer from being explicitly listed. They are handled anyway. - SPDX * multiplexer - SPDX * qcom-vadc - fix inconsistent documentation for reg. * ti-dac5571 - provide and of_match_table. * treewide - update Michael Hennerich's email address. - Use %pOFn rather than device_node.name. * documentation. - tidy up a wrong kernel version for the introduction of the position_relative ABI. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAluave0RHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Fogr/A//bfXkfYPO2tPQOe+Ut/isyKvceDFs4faJ 0ogmVxrH5hwFe96vfB0RWcYhovKXONrRtqreMCiVPMjKxg5o+F3Q+eSj0qhxhG77 bDV5CnF1GXiBe/02WSEs9B3L4oxu6Z/PGq2sGrlTfTy8NZxJW6biER1aWeBbxmR6 nPBb9SXH4vuqiiF8UOwRB2ETelx2jXXCNFxmUVQ0bzCYgAp/n7B2ZJu6OxWIhBGC NEPYofFajNATJEGgTQmwmKNv6xL4wVSpZXMLO1hzKPe8arARBqPGjIg14srl+nWs HsOdsl/GkeOcPsI7aUvQO0zC5nOgU9iXtQFZQLq8D1xMQP9LzfRuLhymy8dH8hg+ uUfxkJf0OwhqEW+6GJ0g4A2xaDHyM7JFQAV1/XCNS93qjpcgC7rcLbnSDy9u6SC/ j3g3EFUXVYqOuFXbr+1TLrg/oJhnOkXp3Wbm/Di0zXJNYOtzQ9zSLp55HZLxvOOl zzLWCSkse9EAwHzVnl4BAd03Zw3Ewh9aAJlXQ7JKGtQSXo+PpFyIiyn8woQpzGV8 OePhhmooOYVxI2Aua0UKhwa6lPeZT71zjpJyFCTFJqRwU3I/8HEDH5g+9dX6Vk6h CLF/fCLCkRa1ccDzFQbHai91xLflaYUsXdjOnQymJ5CYToni/IyPukrZ05b2IdvO XnMIaoVrAUU= =+9gG -----END PGP SIGNATURE----- Merge tag 'iio-for-4.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 1st round of IIO new device support, features and cleanups in the 4.20 cycle. There is a merge commit in here to pull in regmap support for repeatedly reading the same register (to read out FIFOs). Used by the adxl372 driver. This will find uses elsewhere once we tidy up various drivers that are effectively doing this and relying on not enabling regcache. New device support * Analog devices ADXL372 accelerometer - new driver for this accelerometer including fifo and and interrupt support. Follow up patches enforce trigger validation, add sampling frequency control and filter bandwidth control. A later series added i2c support to the existing SPI support. * ST lsm6dsx - rework and add support fo the LSM6DSO 6 axis mems sensor. * Linear LTC 1660 DAC - new driver supporting the LTC 1660 and LTC 1665 SPI DACs. * Microchip mcp3911 ADC. - new driver for this integrated analog front end and ADC. * Qualcomm SPMI PMIC5 adc driver - using the spmi framework, new driver and bindings for this ADC. Follow up patch adds some missing channels. Features * ad5758 - support hard reset using a gpio (if provided). * mpu6050 - Regulator support * qcom-spmi-adc5 - Sanity check the channel numbers provided by DT to make sure the driver actually knows about them. * sc27xx - give raw data for channel 20 as it's used on all known boards for the headset which needs a custom converstion function. If it turns out someone builds a board where this isn't true we will deal with it when it happens. - add ADC scale calibration. * tsl2772 - support device tree binding to set the proximity led settings. - regulator supprot. - binding for apds9930 - trivial addition as register compatible with tsl2772. Cleanups / Minor fixes * adxl345 - supress a static checker warning but explicitly checking if the id object is null. * bh1750 - avoid CONFIG_PM_SLEEP checks. - SPDX. * bme680 - spelling mistake - use clamp rather than open coding. - white space and other similar fixes. - rename MSK to MASK for clarifty and use GENMASK to specify them. - use the FIELD_GET macro rather than a very odd accessor of dividing by 16 to get the shift. - rework to share handing for oversampling of the various channels in a unified way. - check explicitly for val2 in write_raw function to ensure it is 0. - drop some field defines that don't add anything. * dpot-adc - SPDX * envelope detector - SPDX * isl29501 - fix an ancient compiler warning mostly because it results in much nicer code. * max30102 - mark switch fall throughs. * max44000 - drop an unused variable. * max512 - avoid CONFIG_PM_SLEEP checks. * max5481 - use of_device_get_match_data rather than open coding it. * max5821 - avoid CONFIG_PM_SLEEP checks. * max9611 - explicity cast an enum to an integer to make it totally clear that this is intended. * mcp4018 - fix an inconsistent MODULE_LICENSE. - use of_device_get_match_data rather than open coding it. * mcp4531 - use of_device_get_match_data rather than open coding it. - SPDX * mcp4725 - avoid CONFIG_PM_SLEEP checks. * mcp4922 - Fix error handling and prevent writing a negative to when setting the output voltage. * ms5611 - drop deprecated compatible strings without manufacturer from being explicitly listed. They are handled anyway. - SPDX * multiplexer - SPDX * qcom-vadc - fix inconsistent documentation for reg. * ti-dac5571 - provide and of_match_table. * treewide - update Michael Hennerich's email address. - Use %pOFn rather than device_node.name. * documentation. - tidy up a wrong kernel version for the introduction of the position_relative ABI. |
||
Eugen Hristev
|
21eab78616 |
iio: fix position relative kernel version
Position relative channel type was added in 4.19 kernel version Fixes: "3055a6cfa04ba" ("iio: Add channel for Position Relative") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Linus Torvalds
|
4290d5b9ca |
xen: fixes for 4.19-rc2
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCW4lM6AAKCRCAXGG7T9hj vs8AAQDysFccg97UdopW3B7yklIaRqkfEIAsxe65f191MXsH2AEAp5SKxZqRPqBP a9WHDj8ShB3BhZ/IxpdO9Y59U3Jo4wA= =Gt4c -----END PGP SIGNATURE----- Merge tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - minor cleanup avoiding a warning when building with new gcc - a patch to add a new sysfs node for Xen frontend/backend drivers to make it easier to obtain the state of a pv device - two fixes for 32-bit pv-guests to avoid intermediate L1TF vulnerable PTEs * tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: remove redundant variable save_pud xen: export device state to sysfs x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear x86/xen: don't write ptes directly in 32-bit PV guests |
||
Joe Jin
|
076e2cedd6 |
xen: export device state to sysfs
Export device state to sysfs to allow for easier get device state. Signed-off-by: Joe Jin <joe.jin@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> |
||
Jens Axboe
|
057d3ccf93 |
Merge branch 'stable/for-jens-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus
Pull Xen block driver fixes from Konrad: "Fix for flushing out persistent pages at a deterministic rate" * 'stable/for-jens-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/blkback: remove unused pers_gnts_lock from struct xen_blkif_ring xen/blkback: move persistent grants flags to bool xen/blkfront: reorder tests in xlblk_init() xen/blkfront: cleanup stale persistent grants xen/blkback: don't keep persistent grants too long |
||
Juergen Gross
|
973e5405f2 |
xen/blkback: don't keep persistent grants too long
Persistent grants are allocated until a threshold per ring is being reached. Those grants won't be freed until the ring is being destroyed meaning there will be resources kept busy which might no longer be used. Instead of freeing only persistent grants until the threshold is reached add a timestamp and remove all persistent grants not having been in use for a minute. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
||
Linus Torvalds
|
899fbc33fd |
platform-drivers-x86 for v4.19-1
The driver for Silead touchscreen configurations has been renamed from silead_dmi to touchscreen_dmi since it starts supporting other touchscreens which require some DMI quirks. At the same release cycle it gets expanded to cover cases for Chuwi Vi10, ONDA V891W, Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets. Another bunch of changes is related to Mellanox platform code to allow user space to communicate with Mellanox for system control and monitoring purposes. The driver notifies user on hotplug device signal receiving. ASUS WMI drivers recognize lid flip action on UX360, and correctly toggles airplane mode LED. In addition the keyboard backlight toggle gets support. ThinkPad ACPI driver enables support for calculator key (on at least P52). It also has been fixed to support three characters model designators, which are used for modern laptops. Earlier the battery, marked as BAT1, on ThinkPad laptops has not been configured properly, which is fixed. On the opposite the multi-battery configurations now probed correctly. Dell SMBIOS driver starts working on some Dell servers which do not support token interface. The regression with backlight detection has also been fixed. In order to support dock mode on some laptops, Intel virtual button driver has been fixed. The last but not least is the fix to Intel HID driver due to changes in Dell systems that prevented to use power button. The following is an automated git shortlog grouped by driver: acer-wmi: - Silence "unsupported" message a bit - refactor function has_cap asus-nb-wmi: - Add keymap entry for lid flip action on UX360 asus-wireless: - Fix uninitialized symbol usage - Toggle airplane mode LED asus-wmi: - Add keyboard backlight toggle support - Call led hw_changed API on kbd brightness change dell-laptop: - Fix backlight detection dell-smbios: - make a function and a pointer static dell-smbios-base: - Support systems without tokens dell-smbios-wmi: - make function dell_smbios_wmi_call static ideapad-laptop: - Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill - Apply no_hw_rfkill to Y20-15IKBM, too intel-hid: - Add support for Device Specific Methods intel_ips: - remove redundant variables slope and offset intel_pmc_core: - Add CNP SLPS0 debug registers intel_punit_ipc: - fix build errors intel-vbtn: - Add support for dock mode detection mlx-platform: - Fix copy-paste error in mlxplat_init() - Remove unused define - Change mlxreg-io configuration for MSN274x systems - Allow mlxreg-io driver activation for more systems - Add ASIC hotplug device configuration - Add new attribute for mlxreg-io sysfs interfaces - Add mlxreg-fan platform driver activation - Add documentation mlxreg-io sysfs interfaces - Add mlxreg-io platform driver activation platform/mellanox: - mlxreg-hotplug: Add hotplug hwmon uevent notification - mlxreg-hotplug: Improve mechanism of ASIC health discovery - Use 2-factor allocator calls - Introduce support for Mellanox register access driver thinkpad_acpi: - Fix multi-battery bug - extend battery quirk coverage - Support battery quirk - Proper model/release matching - Add support for calculator hotkey toshiba_acpi: - Fix defined but not used build warnings - Update KBD backlight LED on second gen laptops touchscreen_dmi: - Rename silead_dmi to touchscreen_dmi - Add touchscreen info for the Chuwi Vi10 tablet - Sort entries alphabetically - Rename trekstor entries - Add info for the Cube KNote i1101 tablet - Add info for the Onda V820w tablet - Add info for the "Connect Tablet 9" tablet - Add info for the ONDA V891W Dual OS tablet wmi: - Do not mix pages and kmalloc -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEhiZOUlnC9oKN3n3AmT3/83c5Sy0FAlt9wVgACgkQmT3/83c5 Sy3Jdg//WnEJZx7+zEsO+3dJnQGN4Fur6xhP79subRhZPFNTZ+D5vMHC9DL8ZQYx U8Kz1ilxCC5HuOo2S1BlzRG+h6ztMSYIFo2H8KRdygOqALEH7hoStPEGYdZcQ0qE 6SKa4MnRw46UcGPij3f6STPiOjicPaLoUSTXZmi2dbmy6sJZMMJamvnRhezgEgJl rA6xvg+tKNBK2jwLpAVfLhy4Btd6LCE4EGgkYdnytOM9ByHLDsTWCZxd/9h7WjPa L8Zd8rftrazWF6X2tAhpXtUcMPg/D4lfL5HHaMmL9FioycQ88WqDBZN5sEWdIbaP OfaMbcbhCIrrHoMNdq0544IgqRQahX+m3VjSkVf3/Aj5AU0nUJMBWSpGHAs7UCSN 8i8M2jdpVW7CVxA+4OU2l19udKrQzXutfXXhVYX0B3hKCkH7TBKax+m/ev9n2yvZ KoTdSJ/4bB6iGhXF8/MA6H72k0g972d4WXozbTusiBO9grqgU1EIe5bYZ4y+FkJL 9gtK1xgtDJB7J8U14lpGC+zKhcYn1Mn3Iq4i5HD3sfnKsVGGWJIjRZsDtALD2RKT OQe7S8xhQWqsUZFGNflWL+8oHyXOHGD5Q8b/YI92ubriyAzh3I3Ybt/atk20vdmG QfKU46suOoOUwcAs00v13oo+9s9GatekXEjGgdRJ14vgzdgx3lc= =vRud -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - The driver for Silead touchscreen configurations has been renamed from silead_dmi to touchscreen_dmi since it starts supporting other touchscreens which require some DMI quirks It also gets expanded to cover cases for Chuwi Vi10, ONDA V891W, Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets. - Another bunch of changes is related to Mellanox platform code to allow user space to communicate with Mellanox for system control and monitoring purposes. The driver notifies user on hotplug device signal receiving. - ASUS WMI drivers recognize lid flip action on UX360, and correctly toggles airplane mode LED. In addition the keyboard backlight toggle gets support. - ThinkPad ACPI driver enables support for calculator key (on at least P52). It also has been fixed to support three characters model designators, which are used for modern laptops. Earlier the battery, marked as BAT1, on ThinkPad laptops has not been configured properly, which is fixed. On the opposite the multi-battery configurations now probed correctly. - Dell SMBIOS driver starts working on some Dell servers which do not support token interface. The regression with backlight detection has also been fixed. In order to support dock mode on some laptops, Intel virtual button driver has been fixed. The last but not least is the fix to Intel HID driver due to changes in Dell systems that prevented to use power button. * tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86: (47 commits) platform/x86: acer-wmi: Silence "unsupported" message a bit platform/x86: intel_punit_ipc: fix build errors platform/x86: ideapad: Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360 platform/x86: acer-wmi: refactor function has_cap platform/x86: thinkpad_acpi: Fix multi-battery bug platform/x86: thinkpad_acpi: extend battery quirk coverage platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init() platform/x86: mlx-platform: Remove unused define platform/x86: mlx-platform: Change mlxreg-io configuration for MSN274x systems Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/x86: mlx-platform: Allow mlxreg-io driver activation for more systems platform/x86: mlx-platform: Add ASIC hotplug device configuration platform/mellanox: mlxreg-hotplug: Add hotplug hwmon uevent notification platform/mellanox: mlxreg-hotplug: Improve mechanism of ASIC health discovery platform/x86: mlx-platform: Add mlxreg-fan platform driver activation platform/x86: dell-laptop: Fix backlight detection platform/x86: toshiba_acpi: Fix defined but not used build warnings platform/x86: thinkpad_acpi: Support battery quirk ... |
||
Linus Torvalds
|
fe6f0ed0da |
f2fs-for-4.19-rc1
In this round, we've tuned f2fs to improve general performance by serializing block allocation and enhancing discard flows like fstrim which avoids user IO contention. And we've added fsync_mode=nobarrier which gives an option to user where it skips issuing cache_flush commands to underlying flash storage. And there are many bug fixes related to fuzzed images, revoked atomic writes, quota ops, and minor direct IO. Enhancement: - add fsync_mode=nobarrier which bypasses cache_flush command - enhance the discarding flow which avoids user IOs and issues in LBA order - readahead some encrypted blocks during GC - enable in-memory inode checksum to verify the blocks if F2FS_CHECK_FS is set - enhance nat_bits behavior - set -o discard by default - set REQ_RAHEAD to bio in ->readpages Bug fixes: - fix a corner case to corrupt atomic_writes revoking flow - revisit i_gc_rwsem to fix race conditions - fix some dio behaviors captured by xfstests - correct handling errors given by quota-related failures - add many sanity check flows to avoid fuzz test failures - add more error number propagation to their callers - fix several corner cases to continue fault injection w/ shutdown loop -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAlt82U4ACgkQQBSofoJI UNJTLQ/+PhewnNa5tDfUgWdFnUFz3h9/NcC677l0OplOOUNxA8iSa1xamlKf/nf9 sB5ey0I7oBF8zQGxfndhHQfi6fpfUcNMr14hm+TS/3+d54xLJmiVShD5fjNSV2vB Ur0xoozuQDwYF1e3QKdBQjFqaCf78VheTr3aWxyv22/Sg+PYylZJ2K8rHTB7mGPU UG0aRnKrP3FPRjL7Q3m0Vm6b6eZ5uNdNrFfjgn/8yuQQ9V197K8vwSbPAsR5/pOh miCQXyM708NgEYJRWkWmC/rDSQdU0/h/mGnJWrBrbceW62QefGOgd2jcVfmthHJa ZXpj+BEG5bYpCCxGxF6N+u0e28OKonCwO/uvL8YAd5icN7yXtsKzoF1CCuXxOYf1 9K5SMylCTSyrs/+LV8CJoT2ya8w0l0w+R/txUYn8UT+4AgqU+chS2kJeXqw9tcHB WLFs/rnAyofWCI/8frVBmJY+zA1ZZvTqs/lmVYrtJUkiOcMTq34WICBUAEFKV452 BM5dcu21bSIkapYispEt4Rr7o4P4HHMQ+N1i2yUZMFCz5T0RyzdybeS5THk2yVzd L0kxfYU+zHigNX51ez8+Z7DyDLDBp6jkD0e66x73bUK9TGPH+ZbnAL6gwLikmD3M +VxYl5nyW/3bxx1HdfK1Xwd4/wYMNBmdtn5NC50oZ+jpB0h8YCE= =zgbL -----END PGP SIGNATURE----- Merge tag 'f2fs-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've tuned f2fs to improve general performance by serializing block allocation and enhancing discard flows like fstrim which avoids user IO contention. And we've added fsync_mode=nobarrier which gives an option to user where it skips issuing cache_flush commands to underlying flash storage. And there are many bug fixes related to fuzzed images, revoked atomic writes, quota ops, and minor direct IO. Enhancements: - add fsync_mode=nobarrier which bypasses cache_flush command - enhance the discarding flow which avoids user IOs and issues in LBA order - readahead some encrypted blocks during GC - enable in-memory inode checksum to verify the blocks if F2FS_CHECK_FS is set - enhance nat_bits behavior - set -o discard by default - set REQ_RAHEAD to bio in ->readpages Bug fixes: - fix a corner case to corrupt atomic_writes revoking flow - revisit i_gc_rwsem to fix race conditions - fix some dio behaviors captured by xfstests - correct handling errors given by quota-related failures - add many sanity check flows to avoid fuzz test failures - add more error number propagation to their callers - fix several corner cases to continue fault injection w/ shutdown loop" * tag 'f2fs-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (89 commits) f2fs: readahead encrypted block during GC f2fs: avoid fi->i_gc_rwsem[WRITE] lock in f2fs_gc f2fs: fix performance issue observed with multi-thread sequential read f2fs: fix to skip verifying block address for non-regular inode f2fs: rework fault injection handling to avoid a warning f2fs: support fault_type mount option f2fs: fix to return success when trimming meta area f2fs: fix use-after-free of dicard command entry f2fs: support discard submission error injection f2fs: split discard command in prior to block layer f2fs: wake up gc thread immediately when gc_urgent is set f2fs: fix incorrect range->len in f2fs_trim_fs() f2fs: refresh recent accessed nat entry in lru list f2fs: fix avoid race between truncate and background GC f2fs: avoid race between zero_range and background GC f2fs: fix to do sanity check with block address in main area v2 f2fs: fix to do sanity check with inline flags f2fs: fix to reset i_gc_failures correctly f2fs: fix invalid memory access f2fs: fix to avoid broken of dnode block list ... |
||
Jaegeuk Kim
|
853137cef4 |
f2fs: fix performance issue observed with multi-thread sequential read
This reverts the commit - "b93f771 - f2fs: remove writepages lock" to fix the drop in sequential read throughput. Test: ./tiotest -t 32 -d /data/tio_tmp -f 32 -b 524288 -k 1 -k 3 -L device: UFS Before - read throughput: 185 MB/s total read requests: 85177 (of these ~80000 are 4KB size requests). total write requests: 2546 (of these ~2208 requests are written in 512KB). After - read throughput: 758 MB/s total read requests: 2417 (of these ~2042 are 512KB reads). total write requests: 2701 (of these ~2034 requests are written in 512KB). Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Linus Torvalds
|
d5acba26bf |
Char/Misc driver patches for 4.19-rc1
Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. Full details of everything is in the shortlog. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g7ew8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykfBgCeOG0RkSI92XVZe0hs/QYFW9kk8JYAnRBf3Qpm cvW7a+McOoKz/MGmEKsi =TNfn -----END PGP SIGNATURE----- Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ... |
||
Linus Torvalds
|
2475c515d4 |
Staging/IIO patches for 4.19-rc1
Here are the big staging/iio patches for 4.19-rc1. Lots of churn here, with tons of cleanups happening in staging drivers, a removal of an old crypto driver that no one was using (skein), and the addition of some new IIO drivers. Also added was a "gasket" driver from Google that needs loads of work and the erofs filesystem. Even with adding all of the new drivers and a new filesystem, we are only adding about 1000 lines overall to the kernel linecount, which shows just how much cleanup happened, and how big the unused crypto driver was. All of these have been in the linux-next tree for a while now with no reported issues. Note, you will have a merge problem with a device tree IIO file and the MAINTAINERS file, both resolutions are easy, just take all changed. There will be a skein file merge issue as well, but that file got deleted so just drop that. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g+2A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykwGACfQZz3Ncvc7thHkZytxxqQnbx5JpkAn0yV5SvF yVXG9SA9yCTKVjYczZjZ =6t/x -----END PGP SIGNATURE----- Merge tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here are the big staging/iio patches for 4.19-rc1. Lots of churn here, with tons of cleanups happening in staging drivers, a removal of an old crypto driver that no one was using (skein), and the addition of some new IIO drivers. Also added was a "gasket" driver from Google that needs loads of work and the erofs filesystem. Even with adding all of the new drivers and a new filesystem, we are only adding about 1000 lines overall to the kernel linecount, which shows just how much cleanup happened, and how big the unused crypto driver was. All of these have been in the linux-next tree for a while now with no reported issues" * tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits) staging:rtl8192u: Remove unused macro definitions - Style staging:rtl8192u: Add spaces around '+' operator - Style staging:rtl8192u: Remove stale comment - Style staging: rtl8188eu: remove unused mp_custom_oid.h staging: fbtft: Add spaces around / - Style staging: fbtft: Erases some repetitive usage of function name - Style staging: fbtft: Adjust some empty-line problems - Style staging: fbtft: Removes one nesting level to help readability - Style staging: fbtft: Changes gamma table to define. staging: fbtft: A bit more information on dev_err. staging: fbtft: Fixes some alignment issues - Style staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style staging: rtl8188eu: remove unused array dB_Invert_Table staging: rtl8188eu: remove whitespace, add missing blank line staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c staging: rtl8188eu: remove whitespace - style staging: rtl8188eu: cleanup block comment - style staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c staging: rtlwifi: refactor rtl_get_tcb_desc ... |
||
Linus Torvalds
|
5695d5d197 |
USB/PHY patches for 4.19-rc1
Here is the big USB and phy driver patch set for 4.19-rc1. Nothing huge but there was a lot of work that happened this development cycle: - lots of type-c work, with drivers graduating out of staging, and displayport support being added. - new PHY drivers - the normal collection of gadget driver updates and fixes - code churn to work on the urb handling path, using irqsave() everywhere in anticipation of making this codepath a lot simpler in the future. - usbserial driver fixes and reworks - other misc changes Full details are in the shortlog. All of these have been in linux-next with no reported issues for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3hBPA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yloNwCggMZi9m8Krjq7d7aLw5oJJex/nIAAn0jeADOT NpoCgrtGHjwrATxN5/Ke =jXa3 -----END PGP SIGNATURE----- Merge tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB and phy driver patch set for 4.19-rc1. Nothing huge but there was a lot of work that happened this development cycle: - lots of type-c work, with drivers graduating out of staging, and displayport support being added. - new PHY drivers - the normal collection of gadget driver updates and fixes - code churn to work on the urb handling path, using irqsave() everywhere in anticipation of making this codepath a lot simpler in the future. - usbserial driver fixes and reworks - other misc changes All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: serial: pl2303: add a new device id for ATEN usb: renesas_usbhs: Kconfig: convert to SPDX identifiers usb: dwc3: gadget: Check MaxPacketSize from descriptor usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms usb: dwc2: Turn on uframe_sched on "amlogic" platforms usb: dwc2: Turn on uframe_sched on "his" platforms usb: dwc2: Turn on uframe_sched on "bcm" platforms usb: dwc2: gadget: ISOC's starting flow improvement usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic. usb: dwc3: core: Enable AutoRetry feature in the controller usb: dwc3: Set default mode for dwc_usb31 usb: gadget: udc: renesas_usb3: Add register of usb role switch usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep usb: dwc2: Modify dwc2_readl/writel functions prototype usb: dwc3: pci: Intel Merrifield can be host usb: dwc3: pci: Supply device properties via driver data arm64: dts: dwc3: description of incr burst type usb: dwc3: Enable undefined length INCR burst type usb: dwc3: add global soc bus configuration reg0 usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci ... |
||
Linus Torvalds
|
5e2d059b52 |
powerpc updates for 4.19
Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao B, zhong jiang. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAlt2O6cTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgC7hD/4+cj796Df7GsVsIMxzQm7SS9dklIdO JuKj2Nr5HRzTH59jWlXukLG9mfTNCFgFJB4gEpK1ArDOTcHTCI9RRsLZTZ/kum66 7Pd+7T40dLYXB5uecuUs0vMXa2fI3syKh1VLzACSXv3Dh9BBIKQBwW/aD2eww4YI 1fS5LnXZ2PSxfr6KNAC6ogZnuaiD0sHXOYrtGHq+S/TFC7+Z6ySa6+AnPS+hPVoo /rHDE1Khr66aj7uk+PP2IgUrCFj6Sbj6hTVlS/iAuwbMjUl9ty6712PmvX9x6wMZ 13hJQI+g6Ci+lqLKqmqVUpXGSr6y4NJGPS/Hko4IivBTJApI+qV/tF2H9nxU+6X0 0RqzsMHPHy13n2torA1gC7ttzOuXPI4hTvm6JWMSsfmfjTxLANJng3Dq3ejh6Bqw 76EMowpDLexwpy7/glPpqNdsP4ySf2Qm8yq3mR7qpL4m3zJVRGs11x+s5DW8NKBL Fl5SqZvd01abH+sHwv6NLaLkEtayUyohxvyqu2RU3zu5M5vi7DhqstybTPjKPGu0 icSPh7b2y10WpOUpC6lxpdi8Me8qH47mVc/trZ+SpgBrsuEmtJhGKszEnzRCOqos o2IhYHQv3lQv86kpaAFQlg/RO+Lv+Lo5qbJ209V+hfU5nYzXpEulZs4dx1fbA+ze fK8GEh+u0L4uJg== =PzRz -----END PGP SIGNATURE----- Merge tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ... |
||
Linus Torvalds
|
4e31843f68 |
pci-v4.19-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlt1f9AUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vxbdhAArnhRvkwOk4m4/LCuKF6HpmlxbBNC TjnBCenNf+lFXzWskfDFGFl/Wif4UzGbRTSCNQrwMzj3Ww3f/6R2QIq9rEJvyNC4 VdxQnaBEZSUgN87q5UGqgdjMTo3zFvlFH6fpb5XDiQ5IX/QZeXeYqoB64w+HvKPU M+IsoOvnA5gb7pMcpchrGUnSfS1e6AqQbbTt6tZflore6YCEA4cH5OnpGx8qiZIp ut+CMBvQjQB01fHeBc/wGrVte4NwXdONrXqpUb4sHF7HqRNfEh0QVyPhvebBi+k1 kquqoBQfPFTqgcab31VOcQhg70dEx+1qGm5/YBAwmhCpHR/g2gioFXoROsr+iUOe BtF6LZr+Y8cySuhJnkCrJBqWvvBaKbJLg0KMbI+7p4o9MZpod2u7LS5LFrlRDyKW 3nz3o+b1+v3tCCKVKIhKo0ljolgkweQtR1f6KIHvq93wBODHVQnAOt9NlPfHVyks ryGBnOhMjoU5hvfexgIWFk9Ph9MEVQSffkI+TeFPO/tyGBfGfQyGtESiXuEaMQaH FGdZHX2RLkY3pWHOtWeMzRHzOnr2XjpDFcAqL3HBGPdJ30K3Umv3WOgoFe2SaocG 0gaddPjKSwwM4Sa/VP+O5cjGuzi7QnczSDdpYjxIGZzBav32hqx4/rsnLw7bHH8y XkEme7cYJc8MGsA= =2Dmn -----END PGP SIGNATURE----- Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ... |
||
Linus Torvalds
|
9a76aba02a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ... |
||
Linus Torvalds
|
3860cae64c |
regulator: Changes for v4.19
The biggest set of changes in here is the addition of the Qualcomm RPMH driver. As well as the regualtor driver itself being quite large due to the usual involved Qualcomm regulator stuff there's also some code shared with the arm-soc tree, a bus driver required to communicate with the hardware that actually winds up being much larger than the regulator driver itself and a LLCC driver that was part of the same signed tag used with the arm-soc tree. Other than that it's a fairly standard and quiet release, highlights include: - Addition of device links from regulator consumers to their regulators, helping the core avoid dependency issues during suspend. - Support for the entertainingly innovative suspend implementation in the BD9571MWV. - Support for switch regulators on the PFUZE100, this required two goes due to backwards compatibility issues with old DTs that were discovered. - Support for Freescale PFUZE3001 and SocioNext UniPhier. - The aforementioned Qualcomm RPMH driver together with the driver changes required to support it. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAltxi/ATHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0GNxB/99LLeB+gfD4ckoU07Az/k77+CfIZ8D HEUA9ryP4y6isUxpZMGcZhKa48ag9RxTuAGK+gGWtKUHxPIH6o0CuRLbGm3GOo99 MTbbMaJRJIHkwsh8XjX2Adr02XSzU/9r2T3rpZD10T/J1Qj1D3W1YuvaE/fQuOII XW8QWhRuTWbVI/gSIEj+o2PcVK77yb9Nr+llNvS+BOlFAlnNo1tx3qCJ1bUiVEyD DhLkL0n0XfaOpbtZV5DIsVDiMsB+/TnXtqiijfvq0qi5SHh6jECpQYNWHBNyIkwj 4N9NQ9xfC6bArAl9tWxXvJrVXUqFSRagHeB2xLD6piWcZ0DC4K0QfEW2 =WiXl -----END PGP SIGNATURE----- Merge tag 'regulator-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The biggest set of changes in here is the addition of the Qualcomm RPMH driver. As well as the regualtor driver itself being quite large due to the usual involved Qualcomm regulator stuff there's also some code shared with the arm-soc tree, a bus driver required to communicate with the hardware that actually winds up being much larger than the regulator driver itself and a LLCC driver that was part of the same signed tag used with the arm-soc tree. Other than that it's a fairly standard and quiet release, highlights include: - Addition of device links from regulator consumers to their regulators, helping the core avoid dependency issues during suspend. - Support for the entertainingly innovative suspend implementation in the BD9571MWV. - Support for switch regulators on the PFUZE100, this required two goes due to backwards compatibility issues with old DTs that were discovered. - Support for Freescale PFUZE3001 and SocioNext UniPhier. - The aforementioned Qualcomm RPMH driver together with the driver changes required to support it" * tag 'regulator-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits) regulator: add QCOM RPMh regulator driver regulator: dt-bindings: add QCOM RPMh regulator bindings regulator: samsung: Add SPDX license identifiers regulator: maxim: Add SPDX license identifiers regulator: bd71837: adobt MFD changes to regulator driver regulator: tps65217: Fix NULL pointer dereference on probe regulator: Add support for CPCAP regulators on Motorola Xoom devices. regulator: Add sw2_sw4 voltage table to cpcap regulator. regulator: bd9571mwv: Make symbol 'dev_attr_backup_mode' static regulator: pfuze100: add support to en-/disable switch regulators regulator: pfuze100: add optional disable switch-regulators binding soc: qcom: rmtfs-mem: fix memleak in probe error paths soc: qcom: llc-slice: Add missing MODULE_LICENSE() drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type() drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs firmware: qcom: scm: add a dummy qcom_scm_assign_mem() drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children drivers: qcom: rpmh-rsc: allow active requests from wake TCS drivers: qcom: rpmh: add support for batch RPMH request drivers: qcom: rpmh: allow requests to be sent asynchronously ... |
||
Linus Torvalds
|
73ba2fb33c |
for-4.19/block-20180812
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAltwvasQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpv65EACTq5gSLnJBI6ZPr1RAHruVDnjfzO2Veitl tUtjm0XfWmnEiwQ3dYvnyhy99xbyaG3900d9BClCTlH6xaUdSiQkDpcKG/R2F36J 5mZitYukQcpFAQJWF8YKsTTE7JPl4VglCIDqYiC4+C3rOSVi8lrKn2qp4J4MMCFn thRg3jCcq7c5s9Eigsop1pXWQSasubkXfk55Krcp4oybKYpYRKXXf74Mj14QAbwJ QHN3VisyAUWoBRg7UQZo1Npe2oPk6bbnJypnjf8M0M2EnlvddEkIlHob91sodka8 6p4APOEu5cbyXOBCAQsw/koff14mb8aEadqeQA68WvXfIdX9ZjfxCX0OoC3sBEXk yqJhZ0C980AM13zIBD8ejv4uasGcPca8W+47mE5P8sRiI++5kBsFWDZPCtUBna0X 2Kh24NsmEya9XRR5vsB84dsIPQ3tLMkxg/IgQRVDaSnfJz0c/+zm54xDyKRaFT4l 5iERk2WSkm9+8jNfVmWG0edrv6nRAXjpGwFfOCPh6/LCSCi4xQRULYN7sVzsX8ZK FRjt24HftBI8mJbh4BtweJvg+ppVe1gAk3IO3HvxAQhv29Hz+uvFYe9kL+3N8LJA Qosr9n9O4+wKYizJcDnw+5iPqCHfAwOm9th4pyedR+R7SmNcP3yNC8AbbheNBiF5 Zolos5H+JA== =b9ib -----END PGP SIGNATURE----- Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block Pull block updates from Jens Axboe: "First pull request for this merge window, there will also be a followup request with some stragglers. This pull request contains: - Fix for a thundering heard issue in the wbt block code (Anchal Agarwal) - A few NVMe pull requests: * Improved tracepoints (Keith) * Larger inline data support for RDMA (Steve Wise) * RDMA setup/teardown fixes (Sagi) * Effects log suppor for NVMe target (Chaitanya Kulkarni) * Buffered IO suppor for NVMe target (Chaitanya Kulkarni) * TP4004 (ANA) support (Christoph) * Various NVMe fixes - Block io-latency controller support. Much needed support for properly containing block devices. (Josef) - Series improving how we handle sense information on the stack (Kees) - Lightnvm fixes and updates/improvements (Mathias/Javier et al) - Zoned device support for null_blk (Matias) - AIX partition fixes (Mauricio Faria de Oliveira) - DIF checksum code made generic (Max Gurtovoy) - Add support for discard in iostats (Michael Callahan / Tejun) - Set of updates for BFQ (Paolo) - Removal of async write support for bsg (Christoph) - Bio page dirtying and clone fixups (Christoph) - Set of bcache fix/changes (via Coly) - Series improving blk-mq queue setup/teardown speed (Ming) - Series improving merging performance on blk-mq (Ming) - Lots of other fixes and cleanups from a slew of folks" * tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits) blkcg: Make blkg_root_lookup() work for queues in bypass mode bcache: fix error setting writeback_rate through sysfs interface null_blk: add lock drop/acquire annotation Blk-throttle: reduce tail io latency when iops limit is enforced block: paride: pd: mark expected switch fall-throughs block: Ensure that a request queue is dissociated from the cgroup controller block: Introduce blk_exit_queue() blkcg: Introduce blkg_root_lookup() block: Remove two superfluous #include directives blk-mq: count the hctx as active before allocating tag block: bvec_nr_vecs() returns value for wrong slab bcache: trivial - remove tailing backslash in macro BTREE_FLAG bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section bcache: set max writeback rate when I/O request is idle bcache: add code comments for bset.c bcache: fix mistaken comments in request.c bcache: fix mistaken code comments in bcache.h bcache: add a comment in super.c bcache: avoid unncessary cache prefetch bch_btree_node_get() bcache: display rate debug parameters to 0 when writeback is not running ... |
||
Rashmica Gupta
|
24576a70e7 |
Documentation: Update documentation on ppc-memtrace
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> |
||
Vadim Pasternak
|
a34e134314 |
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
The systems of type MSN21xx, MSN201x have a slight difference from the default reset cause bits description, it uses reset_hotswap_or_halt instead of reset_hotswap_or_wd. New attribute is documented. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
Greg Kroah-Hartman
|
45dd7af410 |
usb: changes for v4.19
Not a big pull request with only 37 non-merge commits, most of which are touching dwc2 (74% of the changes). The most important changes are dwc2's support for uframe scheduling and its endian-agnostic readl/writel wrappers. From dwc3 side we have a special new glue layer for Synopsys HAPS which will help Synopsys running FPGA validation using our upstream driver. We also have the beginnings of dual-role support for Intel Merrifield platform. Apart from these, just a series of non-critical changes. -----BEGIN PGP SIGNATURE----- iQJRBAABCgA7FiEElLzh7wn96CXwjh2IzL64meEamQYFAltewsEdHGZlbGlwZS5i YWxiaUBsaW51eC5pbnRlbC5jb20ACgkQzL64meEamQaV8BAAziA9QIT6to7Zzd7t tsfU3chXUS2t+fZ6drADdHHwJTvjCT4D9FbpYFSNC9lanSLB+IwQ6rZGglyyPh5P DVcWObi8wR1+w8gcx+NL65XuzM/oM8Sx+zSA+3hV7H8A1ePikd+wFpXcZhY0zoLS 00BoAf66CvRvGAGX8e1HouL4LPs/V5vllxcObKLrzcziCNziLhAy1MkONAwSagvP JA50nh0Jau6p/+inF/931oeixmVvTV0xJjqveIf6cVsyv9jNy+I53rFwVsaiSVLz dvzrnPmzWbT4F1yuLgqXccd68FF4Zm+Vl+uHyzaZ7b8e1JK7ABg9a7Us6CjP9HXq aw63hUKmrsTsTyLCWkoU6ypeCYJF3Et49pzicLRFOdXufWJLTRa0iNbgyf8gNOQt K8igJZkmHnb4RByLITtHot3Qdpn2Mr+8Cu/H4TpqQBAKom6mxdwkfm4lojBzLoRn IIr81yTJD00uqgQ40IeoFyV5zz4CqMti3GQX8QXO2wdbrKlaLCr4UDuu4llE2AJ9 1cYV8SMoC2yXaGsshe2dvCq4/lhxiOXPBNoR/GvtvXd84AXaYCsuphUhSGTybYLG a3LO72mn4R8hAnqzh3+xyC4Irs9hgVJUKOD7fFn0ZPvCXgLUQIYRimIprEQ0EsCI /lcdOwOheSGM9Fq5U/fcWDdZcmE= =HiNz -----END PGP SIGNATURE----- Merge tag 'usb-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: changes for v4.19 Not a big pull request with only 37 non-merge commits, most of which are touching dwc2 (74% of the changes). The most important changes are dwc2's support for uframe scheduling and its endian-agnostic readl/writel wrappers. From dwc3 side we have a special new glue layer for Synopsys HAPS which will help Synopsys running FPGA validation using our upstream driver. We also have the beginnings of dual-role support for Intel Merrifield platform. Apart from these, just a series of non-critical changes. |
||
Stephen Hemminger
|
7ceb1c3753 |
Drivers: hv: vmbus: add numa_node to sysfs
Being able to find the numa_node for a device is useful for userspace drivers (DPDK) and also for diagnosing performance issues. This makes vmbus similar to pci. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Kieran Bingham
|
d7af78b924 |
usb: gadget: uvc: Expose configuration name through video node
When utilising multiple instantiations of a UVC gadget on a composite device, there is no clear method to link a particular configuration to its respective video node. Provide a means for identifying the correct video node by exposing the name of the function configuration through sysfs. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> |
||
Maxime Roussin-Bélanger
|
e01e7eaf37 |
iio: light: introduce si1133
e-mail received from Silicon Lab to confirm that the licensing isn't a problem. " Dear Maxime Roussin-Belanger, The LUX calculation code only works with Si1133. As long as the software is used with Silicon Lab's sensor product, I don't see any problem. Regards, Tony " Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Maxime Roussin-Bélanger
|
c0e4e0fd95 |
iio: Add modifier for DUV light
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Mathieu Othacehe
|
1c28799257 |
iio: light: isl29501: Add support for the ISL29501 ToF sensor.
This patch adds support for the ISL29501 Time of Flight sensor. Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Mathieu Othacehe
|
c73314e6eb |
iio: Add channel for Phase
Add new channel type support for phase. This channel may be used by Time-of-flight sensors to express the phase difference between emitted and received signals. Those sensor will then use the phase shift of return signals to approximate the distance to objects. Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Rajat Jain
|
12833017e5 |
PCI/AER: Add sysfs attributes for rootport cumulative stats
Add sysfs attributes for rootport statistics (that are cumulative of all the ERR_* messages seen on this PCI hierarchy). Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Rajat Jain
|
81aa5206f9 |
PCI/AER: Add sysfs attributes to provide AER stats and breakdown
Add sysfs attributes to provide total and breakdown of the AERs seen, into different type of correctable, fatal and nonfatal errors: /sys/bus/pci/devices/<dev>/aer_dev_correctable /sys/bus/pci/devices/<dev>/aer_dev_fatal /sys/bus/pci/devices/<dev>/aer_dev_nonfatal Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Michael Callahan
|
bdca3c87fb |
block: Track DISCARD statistics and output them in stat and diskstat
Add tracking of REQ_OP_DISCARD ios to the partition statistics and append them to the various stat files in /sys as well as /proc/diskstats. These are tracked with the same four stats as reads and writes: Number of discard ios completed. Number of discard ios merged Number of discard sectors completed Milliseconds spent on discard requests This is done via adding a new STAT_DISCARD define to genhd.h and then using it to index that stat field for discard requests. tj: Refreshed on top of v4.17 and other previous updates. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andy Newell <newella@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Geert Uytterhoeven
|
cf18fd0146
|
regulator: bd9571mwv: Document "backup_mode" sysfs file
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Xiao Guangrong
|
857a26222f |
fpga: dfl: afu: add afu sub feature support
User Accelerated Function Unit sub feature exposes the MMIO region of the AFU. After valid PR bitstream is programmed and the port is enabled, then this MMIO region could be accessed. This patch adds support to enumerate the AFU MMIO region and expose it to userspace via mmap file operation. Below interfaces are exposed to user: Sysfs interface: * /sys/class/fpga_region/<regionX>/<dfl-port.x>/afu_id Read-only. Indicate which PR bitstream is programmed to this AFU. Ioctl interfaces: * DFL_FPGA_PORT_GET_INFO Provide info to userspace on the number of supported region. Only UAFU region is supported now. * DFL_FPGA_PORT_GET_REGION_INFO Provide region information, including access permission, region size, offset from the start of device fd. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Wu Hao
|
e4664c0ee4 |
fpga: dfl: afu: add header sub feature support
The port header register set is always present for port, it is mainly for capability, control and status of the ports that AFU connected to. This patch implements header sub feature support. Below user interfaces are created by this patch. Sysfs interface: * /sys/class/fpga_region/<regionX>/<dfl-port.x>/id Read-only. Port ID. Ioctl interface: * DFL_FPGA_PORT_RESET Reset the FPGA Port and its AFU. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Kang Luwei
|
0a27ff24d5 |
fpga: dfl: fme: add header sub feature support
The Header Register set is always present for FPGA Management Engine (FME), this patch implements init and uinit function for header sub feature and introduces several read-only sysfs interfaces for the capability and status. Sysfs interfaces: * /sys/class/fpga_region/<regionX>/<dfl-fme.x>/ports_num Read-only. Number of ports implemented * /sys/class/fpga_region/<regionX>/<dfl-fme.x>/bitstream_id Read-only. Bitstream (static FPGA region) identifier number. It contains the detailed version and other information of this static FPGA region. * /sys/class/fpga_region/<regionX>/<dfl-fme.x>/bitstream_metadata Read-only. Bitstream (static FPGA region) meta data. It contains the synthesis date, seed and other information of this static FPGA region. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Kang Luwei <luwei.kang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Wu Hao
|
41a8b2c564 |
fpga: region: add compat_id support
This patch introduces a compat_id pointer member and sysfs interface for each fpga region, similar as compat_id for fpga manager, it allows applications to read the per region compat_id for compatibility checking before other actions on this fpga-region (e.g. PR). Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Wu Hao
|
ecb5fbe299 |
fpga: mgr: add status for fpga-manager
This patch adds status sysfs interface for fpga manager, it's a read only interface which allows user to get fpga manager status, including full/partial reconfiguration error and other status information. It adds a status callback to fpga_manager_ops too, allows each fpga_manager driver to define its own method to collect latest status from hardware. The following sysfs file is created: * /sys/class/fpga_manager/<fpga>/status Return status of fpga manager, including reconfiguration errors. Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Suzuki K Poulose
|
c34cc23f1d |
coresight: tmc: Add configuration support for trace buffer size
Now that we can dynamically switch between contiguous memory and SG table depending on the trace buffer size, provide the support for selecting an appropriate buffer size. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Jiri Kosina
|
d90a7a0ec8 |
x86/bugs, kvm: Introduce boot-time control of L1TF mitigations
Introduce the 'l1tf=' kernel command line option to allow for boot-time switching of mitigation that is used on processors affected by L1TF. The possible values are: full Provides all available mitigations for the L1TF vulnerability. Disables SMT and enables all mitigations in the hypervisors. SMT control via /sys/devices/system/cpu/smt/control is still possible after boot. Hypervisors will issue a warning when the first VM is started in a potentially insecure configuration, i.e. SMT enabled or L1D flush disabled. full,force Same as 'full', but disables SMT control. Implies the 'nosmt=force' command line option. sysfs control of SMT and the hypervisor flush control is disabled. flush Leaves SMT enabled and enables the conditional hypervisor mitigation. Hypervisors will issue a warning when the first VM is started in a potentially insecure configuration, i.e. SMT enabled or L1D flush disabled. flush,nosmt Disables SMT and enables the conditional hypervisor mitigation. SMT control via /sys/devices/system/cpu/smt/control is still possible after boot. If SMT is reenabled or flushing disabled at runtime hypervisors will issue a warning. flush,nowarn Same as 'flush', but hypervisors will not warn when a VM is started in a potentially insecure configuration. off Disables hypervisor mitigations and doesn't emit any warnings. Default is 'flush'. Let KVM adhere to these semantics, which means: - 'lt1f=full,force' : Performe L1D flushes. No runtime control possible. - 'l1tf=full' - 'l1tf-flush' - 'l1tf=flush,nosmt' : Perform L1D flushes and warn on VM start if SMT has been runtime enabled or L1D flushing has been run-time enabled - 'l1tf=flush,nowarn' : Perform L1D flushes and no warnings are emitted. - 'l1tf=off' : L1D flushes are not performed and no warnings are emitted. KVM can always override the L1D flushing behavior using its 'vmentry_l1d_flush' module parameter except when lt1f=full,force is set. This makes KVM's private 'nosmt' option redundant, and as it is a bit non-systematic anyway (this is something to control globally, not on hypervisor level), remove that option. Add the missing Documentation entry for the l1tf vulnerability sysfs file while at it. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20180713142323.202758176@linutronix.de |
||
Alexander Usyskin
|
3cfaeb3353 |
mei: expose fw version to sysfs
The ME FW version is constantly used by detection and update tools. To improve the reliability and simplify these tools provide a sysfs interface to access version of the platform ME firmware in the following format: <platform>:<major>.<minor>.<milestone>.<build>. There can be up to three such blocks for different FW components. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Heikki Krogerus
|
0e3bb7d689 |
usb: typec: Add driver for DisplayPort alternate mode
DisplayPort USB Type-C Alt Mode allows DisplayPort displays and adapters to be attached to the USB Type-C ports on the system. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Heikki Krogerus
|
8a37d87d72 |
usb: typec: Bus type for alternate modes
Introducing a simple bus for the alternate modes. Bus allows binding drivers to the discovered alternate modes the partners support. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Amritha Nambiar
|
a4fd1f4bab |
Documentation: Add explanation for XPS using Rx-queue(s) map
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
David S. Miller
|
8365da2c05 |
This round's updates:
* finally some of the promised HE code, but it turns out to be small - but everything kept changing, so one part I did in the driver was >30 patches for what was ultimately <200 lines of code ... similar here for this code. * improved scan privacy support - can now specify scan flags for randomizing the sequence number as well as reducing the probe request element content * rfkill cleanups * a timekeeping cleanup from Arnd * various other cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAls2HpsACgkQB8qZga/f l8RPuQ//aZbTXc/GkYh0/GAmF4ORHePOHTXTZbMEzPeHQSlUE0nTSieyVtamsyy+ P+0Ik/lck15Oq/8qabUqDfDY37Fm/OD88jxmoVhjDdgTUcTbIm71n1yS9vDLytuL n0Awq2d8xuR2bRkwGgt3Bg0RsCbvqUTa/irrighPiKGqwdVGf7kqGi76hsLrMkx9 MQsVh1tRJCEvqEfs3yojhPna4AFjl9OoKFh0JjKJmKv5MWY5x4ojYG3kvvnAq2uF TIqko4l+R6AR+IzgBsPfzjj8YSJT67Z9IGe8YzId3OcMubpaJqKwrIq0+sYD/9AO /FGlK7V/NNge4E7sRPwu+dFzf9tOQAtKE06Icxy7aFknhdv5yGnuT2XaIUt2fv6b 1jMWMPxY8azBL3H2siDJ17ouRoIJbkw+3o41m3ZCneLebMWjIX/s2Azqiz2lUiU2 RjZ9Zr0qXdSghK5yD6/iInUBdmNBNq5ubQ8OIAy7fL7linvBAO23iP/G4E7zBikw 9DtHvrpRx2yA4oYTZiaP0FIEmN/nhVuY7VLdjfLlLBtU9cs9kxOydOVSVB9MeJfE c+HiIApuykDxUj5mrd2mo7AkINjUVXKrVZLOH8hqlNvbjJRmcfyR/TOUJzdfeLX+ 0jmji7TMZaaooUEm+KllCnIyUxSmlS25/Ekfm2gdx/rMXXzi/Oo= =sNaA -----END PGP SIGNATURE----- Merge tag 'mac80211-next-for-davem-2018-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Small merge conflict in net/mac80211/scan.c, I preserved the kcalloc() conversion. -DaveM Johannes Berg says: ==================== This round's updates: * finally some of the promised HE code, but it turns out to be small - but everything kept changing, so one part I did in the driver was >30 patches for what was ultimately <200 lines of code ... similar here for this code. * improved scan privacy support - can now specify scan flags for randomizing the sequence number as well as reducing the probe request element content * rfkill cleanups * a timekeeping cleanup from Arnd * various other cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Johan Hovold
|
10f146639f |
gnss: add receiver type support
Add a "type" device attribute and a "GNSS_TYPE" uevent variable which can be used to determine the type of a GNSS receiver. The currently identified types reflect the protocol(s) supported by a receiver: "NMEA" NMEA 0183 "SiRF" SiRF Binary "UBX" UBX Note that both SiRF and UBX type receivers typically support a subset of NMEA 0183 with vendor extensions (e.g. to allow switching to the vendor protocol). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Greg Kroah-Hartman
|
f62252bf39 |
First set of IIO new device support, features and cleanups in the 4.19 cycle
The usual mixed bunch. Particular good to see is the generic touch screen driver. Will be interesting to see if this works for other ADCs without major changes. Core features * Channel types - New position relative channel type primarily for touch screen sensors to feed the generic touchscreen driver. New device support * ad5586 - Add support for the AD5311R DAC. * Generic touch screen driver as an IIO consumer. - Note this is in input, but due to dependencies is coming through the IIO tree. - Specific support for this added to the at91-sama5d2 ADC. - Various necessary DT bindings added. Staging Drops * ADIS16060 gyro - A device with a very odd interface that was never cleanly supported. It's now very difficult to get, so unlikely it'll ever be fixed up. Cleanups and minor features and fixes * core - Fix y2038 timestamp issues now the core support is in place. * 104-quad-8 - Provide some defines for magic numbers to help readability. - Fix an off by one error in register selection * ad7606 - Put in a missing function parameter name in a prototype. * adis16023 - Use generic sign_extend function rather than local version. * adis16240 - Use generic sign_extend funciton rather than local version. * at91-sama5d2 - Drop dependency on HAS_DMA now this is handled elsewhere. Will improve build test coverage. - Add oversampling ratio control. Note there is a minor ABI change here to increase the apparent depth to 14 bits so as to allow for transparent provision of different oversampling ratios that drop the actual bit depth to 13 or 12 bits. * hx711 - Add a MAINTAINERS entry for this device. * inv_mpu6050 - Replace the timestamp fifo 'special' code with generic timestamp handling. - Switch to using local store of timestamp divider rather than rate as that is more helpful for accurate time measurement. - Fix an unaligned access that didn't seem to be causing any trouble. - Use the fifo overflow bit to track the overflow status rather than a software counter. - New timestamping mechanism to deal with missed sample interrupts. * stm32-adc - Drop HAS_DMA build dependency. * sun4i-gpadc - Select REGMAP_IRQ a very rarely hit build issue fix. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlsxT24RHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FogOHRAAllFPJBoq+nVqGAqe6CjSmWhAFdyv/Ey0 4iDBsdBHrzhxnDuatqzbFhvu9TgqQxMBSbcRfqrGnJrnCFDNcvo1eJcxq13YFPCy EitRhu5kUdZ6Ez+OQOjX77wGlPyh8idZnaUkWjowOjnXztkHQjy6IWTbDKFk9bPY 9fGBpmPDn1xaVPPWh7lZVAdTwCt2i+efG4sGyZyMQODjtM0q2G1MoHm9ioqgg8lN hzO7YIrZmLlXRUhapQ2/61uwa/2WMrcGK5v8eCGphEZnPN5lUWrT//w91+BCQpBC A9gRFpWblz5qHaRpNhzNbQjUrGvTAeIhF+bdOV2W+oI8CJhTJ0AlNqtUXs2pbaJn FO6jGwkC+jOA3XdE4tbiqenuMSZNggXBCgyRMfIK5WuIeBF02w57KHxgefkGTnQe Iqc9QDLLfkGDsOoh1l/+TMWjAxfXJLd7d04wYcRIDy6wumTi6GJxUesiQAnyq5eo Rg+o8gbfZcnbgzphBRoQjjftFMPeYdr48bCGCmjFjNnIPnemmUZg988gTggl6NST mzbFBsAnejmYpT393FPL0K9dLVUq5cRngQMuLVDjR4VnlQEVMyV0O+CsW83iSM36 3nqpaUOapqsKJT74n62k1YtzJgxr1uoyMS0LGjldAPLDiTgMf9YiPCCihCpiCY89 K9gE6lzS70A= =SvKj -----END PGP SIGNATURE----- Merge tag 'iio-for-4.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of IIO new device support, features and cleanups in the 4.19 cycle The usual mixed bunch. Particular good to see is the generic touch screen driver. Will be interesting to see if this works for other ADCs without major changes. Core features * Channel types - New position relative channel type primarily for touch screen sensors to feed the generic touchscreen driver. New device support * ad5586 - Add support for the AD5311R DAC. * Generic touch screen driver as an IIO consumer. - Note this is in input, but due to dependencies is coming through the IIO tree. - Specific support for this added to the at91-sama5d2 ADC. - Various necessary DT bindings added. Staging Drops * ADIS16060 gyro - A device with a very odd interface that was never cleanly supported. It's now very difficult to get, so unlikely it'll ever be fixed up. Cleanups and minor features and fixes * core - Fix y2038 timestamp issues now the core support is in place. * 104-quad-8 - Provide some defines for magic numbers to help readability. - Fix an off by one error in register selection * ad7606 - Put in a missing function parameter name in a prototype. * adis16023 - Use generic sign_extend function rather than local version. * adis16240 - Use generic sign_extend funciton rather than local version. * at91-sama5d2 - Drop dependency on HAS_DMA now this is handled elsewhere. Will improve build test coverage. - Add oversampling ratio control. Note there is a minor ABI change here to increase the apparent depth to 14 bits so as to allow for transparent provision of different oversampling ratios that drop the actual bit depth to 13 or 12 bits. * hx711 - Add a MAINTAINERS entry for this device. * inv_mpu6050 - Replace the timestamp fifo 'special' code with generic timestamp handling. - Switch to using local store of timestamp divider rather than rate as that is more helpful for accurate time measurement. - Fix an unaligned access that didn't seem to be causing any trouble. - Use the fifo overflow bit to track the overflow status rather than a software counter. - New timestamping mechanism to deal with missed sample interrupts. * stm32-adc - Drop HAS_DMA build dependency. * sun4i-gpadc - Select REGMAP_IRQ a very rarely hit build issue fix. |
||
Thomas Gleixner
|
05736e4ac1 |
cpu/hotplug: Provide knobs to control SMT
Provide a command line and a sysfs knob to control SMT. The command line options are: 'nosmt': Enumerate secondary threads, but do not online them 'nosmt=force': Ignore secondary threads completely during enumeration via MP table and ACPI/MADT. The sysfs control file has the following states (read/write): 'on': SMT is enabled. Secondary threads can be freely onlined 'off': SMT is disabled. Secondary threads, even if enumerated cannot be onlined 'forceoff': SMT is permanentely disabled. Writes to the control file are rejected. 'notsupported': SMT is not supported by the CPU The command line option 'nosmt' sets the sysfs control to 'off'. This can be changed to 'on' to reenable SMT during runtime. The command line option 'nosmt=force' sets the sysfs control to 'forceoff'. This cannot be changed during runtime. When SMT is 'on' and the control file is changed to 'off' then all online secondary threads are offlined and attempts to online a secondary thread later on are rejected. When SMT is 'off' and the control file is changed to 'on' then secondary threads can be onlined again. The 'off' -> 'on' transition does not automatically online the secondary threads. When the control file is set to 'forceoff', the behaviour is the same as setting it to 'off', but the operation is irreversible and later writes to the control file are rejected. When the control status is 'notsupported' then writes to the control file are rejected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> |
||
Vadim Pasternak
|
f193f7985f |
Documentation/ABI: Add documentation mlxreg-io sysfs interfaces
Add documentation for mlxreg-io platform driver sysfs interfaces to allow user space access for system resets control, reset causes monitoring, programmable devices version reading and device selection control. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> |
||
Mauro Carvalho Chehab
|
6ec71b205d |
ABI: sysfs-devices-system-cpu: remove a broken reference
This file doesn't exist anymore: Documentation/cpu-freq/user-guide.txt As the ABI already points to Documentation/cpu-freq, just remove the broken link and the associated text. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net> |
||
Mauro Carvalho Chehab
|
ec15872daa |
docs: fix broken references with multiple hints
The script: ./scripts/documentation-file-ref-check --fix Gives multiple hints for broken references on some files. Manually use the one that applies for some files. Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: James Morris <james.morris@microsoft.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net> |