menu_add_prompt() is the only function that calls menu_add_prop() with
non-NULL prompt.
So, the code inside the if-conditional block of menu_add_prop() can be
moved to menu_add_prompt().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now that 'prompt' is only reduced from T_WORD_QUOTE without any action,
use T_WORD_QUOTE directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 8636a1f967 ("treewide: surround Kconfig file paths with double
quotes") killed use-cases to reduce an unquoted string into the 'prompt'
symbol.
Kconfig still allows to use an unquoted string in the context of menu,
source, or prompt.
So, you can omit quoting if the prompt is a single word:
bool foo
..., but I do not think this is so useful.
Let's require quoting:
bool "foo"
All the Kconfig files in the kernel are written in this way.
Remove the T_WORD from the right-hand side of the symbol 'prompt'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In menu_finalize(), the dependency of a menu entry is propagated
downwards.
For the 'menu', parent->dep and parent->prompt->visible.expr have
the same expression. Both accumulate the 'depends on' of itself and
upper menu entries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit ba6ff60d5e ("kconfig: don't emit warning upon
rootmenu's prompt redefinition").
At that time, rootmenu.prompt was always set first, then it was set
again if a "mainmenu" statement was specified in the Kconfig file.
This is no longer the case since commit 0724a7c32a ("kconfig: Don't
leak main menus during parsing"). Remove the unneeded check.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit bc081dd6e9 ("kbuild: generate modules.builtin") added
infrastructure to generate modules.builtin, the list of all
builtin modules.
Basically, it works like this:
- Kconfig generates include/config/tristate.conf, the list of
tristate CONFIG options with a value in a capital letter.
- scripts/Makefile.modbuiltin makes Kbuild descend into
directories to collect the information of builtin modules.
I am not a big fan of it because Kbuild ends up with traversing
the source tree twice.
I am not sure how perfectly it should work, but this approach cannot
avoid false positives; even if the relevant CONFIG option is tristate,
some Makefiles forces obj-m to obj-y.
Some examples are:
arch/powerpc/platforms/powermac/Makefile:
obj-$(CONFIG_NVRAM:m=y) += nvram.o
net/ipv6/Makefile:
obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
net/netlabel/Makefile:
obj-$(subst m,y,$(CONFIG_IPV6)) += netlabel_calipso.o
Nobody has complained about (or noticed) it, so it is probably fine to
have false positives in modules.builtin.
This commit simplifies the implementation. Let's exploit the fact
that every module has MODULE_LICENSE(). (modpost shows a warning if
MODULE_LICENSE is missing. If so, 0-day bot would already have blocked
such a module.)
I added MODULE_FILE to <linux/module.h>. When the code is being compiled
as builtin, it will be filled with the file path of the module, and
collected into modules.builtin.info. Then, scripts/link-vmlinux.sh
extracts the list of builtin modules out of it.
This new approach fixes the false-positives above, but adds another
type of false-positives; non-modular code may have MODULE_LICENSE()
by mistake. This is not a big deal, it is just the code is always
orphan. We can clean it up if we like. You can see cleanup examples by:
$ git log --grep='make.* explicitly non-modular'
To sum up, this commits deletes lots of code, but still produces almost
equivalent results. Please note it does not increase the vmlinux size at
all. As you can see in include/asm-generic/vmlinux.lds.h, the .modinfo
section is discarded in the link stage.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
NULL expressions are taken to always be true, as implemented by the
expr_is_yes() macro and by several other functions in expr.c. As such,
they ought to be valid inputs to expr_eq(), which compares two
expressions.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If ncurses is installed, but at a non-default location, the previous
error message was not helpful in resolving the situation. Now it will
suggest that pkg-config might need to be installed in addition to
ncurses.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
make listnewconfig will list the individual options that need to be set.
This is useful but there's no easy way to get the help text associated
with the options at the same time. Introduce a new targe
'make helpnewconfig' which lists the full help text of all the
new options as well. This makes it easier to automatically generate
changes that are easy for humans to review. This command also adds
markers between each option for easier parsing.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Some "make help" text lines extend beyond 80 characters.
Wrap them before an opening parenthesis, or before 80 characters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
util.c exists both in scripts/kconfig/ and scripts/kconfig/lxdialog.
Prior to commit 54b8ae66ae ("kbuild: change *FLAGS_<basetarget>.o
to take the path relative to $(obj)"), Kbuild could not pass different
flags to source files with the same basename. Now that this issue
was solved, you can split util.c out of parser.y and compile them
independently of each other.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The merge_config.sh script verifies that all the config options have
their expected value in the resulting file and prints any issues as
warnings. These checks aren't intended to be treated as errors given
the current implementation. However, since "set -e" was added, if the
grep command to look for a config option does not find it the script
will then abort prematurely.
Handle the case where the grep exit status is non-zero by setting
ACTUAL_VAL to an empty string to restore previous functionality.
Fixes: cdfca82157 ("merge_config.sh: Check error codes from make")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kbuild provides per-file compiler flag addition/removal:
CFLAGS_<basetarget>.o
CFLAGS_REMOVE_<basetarget>.o
AFLAGS_<basetarget>.o
AFLAGS_REMOVE_<basetarget>.o
CPPFLAGS_<basetarget>.lds
HOSTCFLAGS_<basetarget>.o
HOSTCXXFLAGS_<basetarget>.o
The <basetarget> is the filename of the target with its directory and
suffix stripped.
This syntax comes into a trouble when two files with the same basename
appear in one Makefile, for example:
obj-y += foo.o
obj-y += dir/foo.o
CFLAGS_foo.o := <some-flags>
Here, the <some-flags> applies to both foo.o and dir/foo.o
The real world problem is:
scripts/kconfig/util.c
scripts/kconfig/lxdialog/util.c
Both files are compiled into scripts/kconfig/mconf, but only the
latter should be given with the ncurses flags.
It is more sensible to use the relative path to the Makefile, like this:
obj-y += foo.o
CFLAGS_foo.o := <some-flags>
obj-y += dir/foo.o
CFLAGS_dir/foo.o := <other-flags>
At first, I attempted to replace $(basetarget) with $*. The $* variable
is replaced with the stem ('%') part in a pattern rule. This works with
most of cases, but does not for explicit rules.
For example, arch/ia64/lib/Makefile reuses rule_as_o_S in its own
explicit rules, so $* will be empty, resulting in ignoring the per-file
AFLAGS.
I introduced a new variable, target-stem, which can be used also from
explicit rules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Zyngier <maz@kernel.org>
The only the difference between clean-files and clean-dirs is the -r
option passed to the 'rm' command.
You can always pass -r, and then remove the clean-dirs syntax.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When we execute make after merging the configurations we ignore any
errors it produces causing whatever is running merge_config.sh to be
unaware of any failures. This issue was noticed by Guillaume Tucker
while looking at problems with testing of clang only builds in KernelCI
which caused Kbuild to be unable to find a working host compiler.
This implementation was suggested by Yamada-san.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Prior to this commit, starting nconfig, xconfig or gconfig, and saving
the .config file more than once caused data loss, where a .config file
that contained only comments would be written to disk starting from the
second save operation.
This bug manifests itself because the SYMBOL_WRITTEN flag is never
cleared after the first call to conf_write, and subsequent calls to
conf_write then skip all of the configuration symbols due to the
SYMBOL_WRITTEN flag being set.
This commit resolves this issue by clearing the SYMBOL_WRITTEN flag
from all symbols before conf_write returns.
Fixes: 8e2442a5f8 ("kconfig: fix missing choice values in auto.conf")
Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 00c864f890 ("kconfig: allow all config targets to write
auto.conf if missing"), Kconfig creates include/config/auto.conf in the
defconfig stage when it is missing.
Joonas Kylmälä reported incorrect auto.conf generation under some
circumstances.
To reproduce it, apply the following diff:
| --- a/arch/arm/configs/imx_v6_v7_defconfig
| +++ b/arch/arm/configs/imx_v6_v7_defconfig
| @@ -345,14 +345,7 @@ CONFIG_USB_CONFIGFS_F_MIDI=y
| CONFIG_USB_CONFIGFS_F_HID=y
| CONFIG_USB_CONFIGFS_F_UVC=y
| CONFIG_USB_CONFIGFS_F_PRINTER=y
| -CONFIG_USB_ZERO=m
| -CONFIG_USB_AUDIO=m
| -CONFIG_USB_ETH=m
| -CONFIG_USB_G_NCM=m
| -CONFIG_USB_GADGETFS=m
| -CONFIG_USB_FUNCTIONFS=m
| -CONFIG_USB_MASS_STORAGE=m
| -CONFIG_USB_G_SERIAL=m
| +CONFIG_USB_FUNCTIONFS=y
| CONFIG_MMC=y
| CONFIG_MMC_SDHCI=y
| CONFIG_MMC_SDHCI_PLTFM=y
And then, run:
$ make ARCH=arm mrproper imx_v6_v7_defconfig
You will see CONFIG_USB_FUNCTIONFS=y is correctly contained in the
.config, but not in the auto.conf.
Please note drivers/usb/gadget/legacy/Kconfig is included from a choice
block in drivers/usb/gadget/Kconfig. So USB_FUNCTIONFS is a choice value.
This is probably a similar situation described in commit beaaddb625
("kconfig: tests: test defconfig when two choices interact").
When sym_calc_choice() is called, the choice symbol forgets the
SYMBOL_DEF_USER unless all of its choice values are explicitly set by
the user.
The choice symbol is given just one chance to recall it because
set_all_choice_values() is called if SYMBOL_NEED_SET_CHOICE_VALUES
is set.
When sym_calc_choice() is called again, the choice symbol forgets it
forever, since SYMBOL_NEED_SET_CHOICE_VALUES is a one-time aid.
Hence, we cannot call sym_clear_all_valid() again and again.
It is crazy to repeat set and unset of internal flags. However, we
cannot simply get rid of "sym->flags &= flags | ~SYMBOL_DEF_USER;"
Doing so would re-introduce the problem solved by commit 5d09598d48
("kconfig: fix new choices being skipped upon config update").
To work around the issue, conf_write_autoconf() stopped calling
sym_clear_all_valid().
conf_write() must be changed accordingly. Currently, it clears
SYMBOL_WRITE after the symbol is written into the .config file. This
is needed to prevent it from writing the same symbol multiple times in
case the symbol is declared in two or more locations. I added the new
flag SYMBOL_WRITTEN, to track the symbols that have been written.
Anyway, this is a cheesy workaround in order to suppress the issue
as far as defconfig is concerned.
Handling of choices is totally broken. sym_clear_all_valid() is called
every time a user touches a symbol from the GUI interface. To reproduce
it, just add a new symbol drivers/usb/gadget/legacy/Kconfig, then touch
around unrelated symbols from menuconfig. USB_FUNCTIONFS will disappear
from the .config file.
I added the Fixes tag since it is more fatal than before. But, this
has been broken since long long time before, and still it is.
We should take a closer look to fix this correctly somehow.
Fixes: 00c864f890 ("kconfig: allow all config targets to write auto.conf if missing")
Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Reported-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
'make olddefconfig' is non-interactive, so we can drop 'yes'.
The behavior is equivalent.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- always require argument for --defconfig and remove the hard-coded
arch/$(ARCH)/defconfig path
- make arch/$(SRCARCH)/configs/defconfig the new default of defconfig
- some code cleanups
-----BEGIN PGP SIGNATURE-----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=1fr/
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- always require argument for --defconfig and remove the hard-coded
arch/$(ARCH)/defconfig path
- make arch/$(SRCARCH)/configs/defconfig the new default of defconfig
- some code cleanups
* tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove meaningless if-conditional in conf_read()
kconfig: Fix spelling of sym_is_changable
unicore32: rename unicore32_defconfig to defconfig
kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG
kconfig: add static qualifier to expand_string()
kconfig: require the argument of --defconfig
kconfig: remove always false ifeq ($(KBUILD_DEFCONFIG,) conditional
sym_is_choice(sym) has already been checked by previous if-block:
if (sym_is_choice(sym) || (sym->flags & SYMBOL_NO_WRITE))
continue;
Hence, the following code is redundant, and the comment is misleading:
if (!sym_is_choice(sym))
continue;
/* fall through */
It always takes 'continue', never falls though.
Clean up the dead code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is a spelling mistake in "changable", it is corrected to
"changeable" and all call sites are updated accordingly.
Signed-off-by: Marco Ammon <marco.ammon@fau.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The kbuild documentation clearly shows that the documents
there are written at different times: some use markdown,
some use their own peculiar logic to split sections.
Convert everything to ReST without affecting too much
the author's style and avoiding adding uneeded markups.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Until recently, if KBUILD_DEFCONFIG was not set by the arch Makefile,
the default path arch/*/defconfig was used.
The last users of the default are gone by the following commits:
- Commit f3e20ad67b ("s390: move arch/s390/defconfig to
arch/s390/configs/defconfig")
- Commit 986a13769c ("alpha: move arch/alpha/defconfig to
arch/alpha/configs/defconfig")
Let's set arch/*/configs/defconfig as a new default. This saves
KBUILD_DEFCONFIG for some architectures.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Currently, the argument for --defconfig is optional. If the argument
is not passed, the hard-coded default arch/$(ARCH)/defconfig is used.
It no longer happens in Linux since the last users of the default are
gone by the following commits:
- Commit f3e20ad67b ("s390: move arch/s390/defconfig to
arch/s390/configs/defconfig")
- Commit 986a13769c ("alpha: move arch/alpha/defconfig to
arch/alpha/configs/defconfig")
I want to kill the Linux-specific directory path embedded in the
Kconfig binary.
The --savedefconfig (reverse operation of --defconfig) requires an
argument, so it should not hurt to do likewise for --defconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With the following two commits applied, all the arch Makefiles
define KBUILD_DEFCONFIG.
- Commit f3e20ad67b ("s390: move arch/s390/defconfig to
arch/s390/configs/defconfig")
- Commit 986a13769c ("alpha: move arch/alpha/defconfig to
arch/alpha/configs/defconfig")
The first conditional in the defconfig rule is always false.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Adding SPDX license identifier is pretty safe; however, here is one
exception.
Since commit ec8f24b7fa ("treewide: Add SPDX license identifier -
Makefile/Kconfig"), "make testconfig" would not pass.
When Kconfig detects a circular file inclusion, it displays error
messages with a file name and a line number prefixed to each line.
The unit test checks if Kconfig emits the error messages correctly
(this also checks the line number correctness).
Now that the test input has the SPDX license identifier at the very top,
the line numbers in the expected stderr should be incremented by 1.
Fixes: ec8f24b7fa ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'ifeq ... else ifneq ... endif' notation is supported by GNU Make 3.81
or later, which is the requirement for building the kernel since
commit 37d69ee308 ("docs: bump minimal GNU Make version to 3.81").
Use it to improve the readability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently menu blocks start with a pretty header but end with nothing in
the generated config. So next config options stick together with the
options from the menu block.
Let's terminate menu blocks in the generated config with a comment and
a newline if needed. Example:
...
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
...
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, the Kbuild core manipulates header search paths in a crazy
way [1].
To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.
Having whitespaces after -I does not matter since commit 48f6e3cf5b
("kbuild: do not drop -I without parameter").
[1]: https://patchwork.kernel.org/patch/9632347/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Valid pathnames will never exceed PATH_MAX, but these file names
are unsanitized and can cause buffer overflow if set incorrectly.
Use snprintf to avoid this. This was flagged during a Coverity scan
of the coreboot project, which also uses kconfig for its build system.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
conf_write_dep() has just one caller:
conf_write_dep("include/config/auto.conf.cmd");
"name" always points to a valid string.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With menuconfig / nconfig, users can input any file path from the
"Save" menu, but it fails if the parent directory does not exist.
Why not create the parent directory automatically. I think this is
a user-friendly behavior.
I changed the error messages in menuconfig / nconfig.
"Nonexistent directory" is no longer the most likely reason of the
failure. Perhaps, the user specified the existing directory, or
attempted to write to the location without write permission.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kconfig updates the .config when it exits even if its content is
exactly the same as before. Since its timestamp becomes newer than
that of other build artifacts, additional processing is invoked,
which is annoying.
- syncconfig is invoked to update include/config/auto.conf, etc.
- kernel/configs.o is recompiled if CONFIG_IKCONFIG is enabled,
then vmlinux is relinked as well.
If the .config is not changed at all, we do not have to even
touch it. Just bail out showing "No change to .config".
$ make allmodconfig
scripts/kconfig/conf --allmodconfig Kconfig
#
# configuration written to .config
#
$ make allmodconfig
scripts/kconfig/conf --allmodconfig Kconfig
#
# No change to .config
#
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, conf_write() can be called with a directory name instead
of a file name. As far as I see, this can happen for menuconfig,
nconfig, gconfig.
If it is given with a directory path, conf_write() kindly appends
getenv("KCONFIG_CONFIG"), but this ends up with hacky dir/basename
handling, and screwed up in corner-cases like "what if KCONFIG_CONFIG
is an absolute path?" as discussed before:
https://patchwork.kernel.org/patch/9910037/
Since conf_write() is already messed up, I'd say "do not do it".
Please pass a file path all the time. If a directory path is specified
for the configuration output, conf_write() will simply error out.
Now that the tmp file is created in the same directory as the .config,
the previously reported "what if KCONFIG_CONFIG points to a different
file system?" has been solved.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nicolas Porcel <nicolasporcel06@gmail.com>
There are still some trailing whitespaces under scripts/kconfig/tests/,
but they must be kept. Otherwise, "make testconfig" would break.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Although it's not required for the build *conf-cfg.sh scripts to be
executable (they're run by CONFIG_SHELL), let's be consistent with other
scripts.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Backspace is not working on some terminal emulators which do not send the
key code defined by terminfo. Terminals either send '^H' (8) or '^?' (127).
But currently only '^?' is handled. Let's also handle '^H' for those
terminals.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When this .gitignore was added, lxdialog was an independent hostprogs-y.
Now that all objects in lxdialog/ are directly linked to mconf, the
lxdialog is no longer generated.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'Save As' menu of xconfig is not working; it always saves the
kernel configuration into the default file irrespective of the file
chosen in the dialog box.
The 'Save' menu always writes into the default file, but it would
make more sense to write into the file previously chosen by 'Load'
or 'Save As'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If you run "make" in a pristine source tree, currently Kbuild will
start to build Kconfig to let it show the error message.
It would be more straightforward to check it in Makefile and let
it fail immediately.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I accidentally dropped '*' in the previous renaming patch.
Revive it so that 'make mrproper' can clean the generated files.
Fixes: d86271af64 ("kconfig: rename generated .*conf-cfg to *conf-cfg")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
You do not have to use define ... endef for filechk_* rules.
For simple cases, the use of assignment looks cleaner, IMHO.
I updated the usage for scripts/Kbuild.include in case somebody
misunderstands the 'define ... endif' is the requirement.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Fix the following warning:
no previous prototype for ‘dbg_sym_flags’ [-Wmissing-prototypes]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, images.c is included by qconf.cc and gconf.c.
qconf.cc uses all of xpm_* arrays, but gconf.c only some of them.
Hence, lots of "... defined but not used" warnings are displayed
while compiling gconf.c
Splitting out images.c fixes the warnings.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add "static" to functions that are locally used in gconf.c
This fixes some "no previous prototype for ..." warnings.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I want to compile each C file independently instead of including all
of them from zconf.y.
Split out confdata.c, expr.c, symbol.c, and preprocess.c .
These are low-hanging fruits.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
All files in lxdialog/ are licensed under GPL-2.0+, and the rest are
under GPL-2.0. I added GPL-2.0 tags to test scripts in tests/.
Documentation/process/license-rules.rst does not suggest anything
about the flex/bison files. Because flex does not accept the C++
comment style at the very top of a file, I used the C style for
zconf.l, and so for zconf.y for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 7a88488bbc ("[PATCH] kconfig: use gperf for kconfig keywords")
introduced gperf for the keyword lookup.
Then, commit bb3290d916 ("Remove gperf usage from toolchain") killed
the gperf use. As a result, the linear keyword search was left behind.
If we do not use gperf, there is no reason to have the separate table
of the keywords. Move all keywords back to the lexer.
I also refactored the lexer to remove the COMMAND and PARAM states.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
To simplify the generated lexer, let the hand-made lexer update the
file name and line number for the parser.
I tested this with DEBUG_PARSE, and confirmed the same file names
and line numbers were dumped.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The lexer has conventionally associated kconf_id data with yylval
to carry additional information to the parser.
No token is relying on this any more.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
T_ENDMENU, T_ENDCHOICE, T_ENDIF are the last users of kconf_id
associated with yylval. Refactor them to not use it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In my understanding, special characters such as '.' and '/' are
supported in unquoted words to use bare file paths in the "source"
statement.
With the previous commit surrounding all file paths with double
quotes, we can drop this.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no grammatical ambiguity by using T_WORD for variables.
The parser can distinguish variables from symbols from the context.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, the lexer returns T_ASSIGN for all of =, :=, and +=
associating yylval with the flavor.
I want to make the generated lexer as simple as possible. So, the
lexer should convert keywords to tokens without thinking about the
meaning.
= -> T_EQUAL
:= -> T_COLON_EQUAL
+= -> T_PLUS_EQUAL
Unfortunately, Kconfig uses = instead of == for the equal operator.
So, the same token T_EQUAL is used for assignment and comparison.
The parser can still distinguish them from the context.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
For the keywords "modules", "defconfig_list", and "allnoconfig_y",
the lexer should pass specific tokens instead of generic T_WORD.
This simplifies both the lexer and the parser.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit removes kconf_id::stype to prepare for the entire
removal of kconf_id.c
To simplify the lexer, I want keywords straight-mapped to tokens.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, "visible" and "depends on", if defined in a menu entry,
must appear in that order.
The real example is in drivers/media/tuners/Kconfig:
menu "Customize TV tuners"
visible if <expr1>
depends on <expr2>
... is fine, but you cannot change the property order like this:
menu "Customize TV tuners"
depends on <expr2>
visible if <expr1>
Kconfig does not require a specific order of properties. In this case,
menu_add_visibility(() and menu_add_dep() are orthogonal.
Loosen this unreasonable restriction.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The code block surrounded by "menu" ... "endmenu" is stmt_list.
Remove the redundant menu_block symbol entirely.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The code block surrounded by "if" ... "endif" is stmt_list.
Remove the redundant if_block symbol entirely.
Remove "stmt_list: stmt_list end" rule as well since it would
obviously cause conflicts.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit decreases 6 shift/reduce conflicts, and finally achieves
conflict-free parser.
Since Kconfig has no terminator for a config block, detecting the end
of config_stmt is not easy.
For example, there are two ways for handling the error in the following
code:
1 config FOO
2 =
[A] Print "unknown option" error, assuming the line 2 is a part of
config_option_list
[B] Print "invalid statement", assuming the line 1 is reduced into
a config_stmt by itself
Bison actually chooses [A] because it performs the shift rather than
the reduction where both are possible.
However, there is no reason to choose one over the other.
Let's remove the option_error, and let it fall back to [B].
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit decreases 15 shift/reduce conflicts.
The location of this error recovery is ambiguous.
For example, there are two ways to interpret the following code:
1 config FOO
2 bool "foo"
[A] Both lines are reduced together into a config_stmt.
[B] The only line 1 is reduced into a config_stmt, and the line 2
matches to "option_name error T_EOL"
Of course, we expect [A], but [B] could be grammatically possible.
Kconfig has no terminator for a config block. So, we cannot detect its
end until we see a non-property keyword. People often insert a blank
line between two config blocks, but it is just a coding convention.
Blank lines are actually allowed anywhere in Kconfig files.
The real error is when a property keyword appears right after "endif",
"endchoice", "endmenu", "source", "comment", or variable assignment.
Instead of fixing the grammatical ambiguity, I chose to simply remove
this error recovery.
The difference is
unexpected option "bool"
... is turned into a more generic message:
invalid statement
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It would be nice to warn if a new line is missing at end of file.
We could do this by checkpatch.pl for arbitrary files, but new line
is rather essential as a statement terminator in Kconfig.
The warning message looks like this:
kernel/Kconfig.preempt:60:warning: no new line at end of file
Currently, kernel/Kconfig.preempt is the only file with no new line
at end of file. Fix it.
I know there are some false negative cases. For example, no warning
is displayed when the last line contains some whitespaces/comments,
but no new line. Yet, this commit works well for most cases.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
A new file should always start in the INITIAL state.
When the lexer bumps into EOF, the lexer must get back to the INITIAL
state anyway. Remove the redundant <<EOF>> pattern in the PARAM state.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit decreases 8 shift/reduce conflicts.
A certain amount of grammatical ambiguity comes from how to reduce
excessive T_EOL tokens.
Let's take a look at the example code below:
1 config A
2 bool "a"
3
4 depends on B
5
6 config B
7 def_bool y
The line 3 is melt into "config_option_list", but the line 5 can be
either a part of "config_option_list" or "common_stmt" by itself.
Currently, the lexer converts '\n' to T_EOL verbatim. In Kconfig,
a new line works as a statement terminator, but new lines in empty
lines are not critical since empty lines (or lines that contain only
whitespaces/comments) are just no-op.
If the lexer simply discards no-op lines, the parser will not be
bothered by excessive T_EOL tokens.
Of course, this means we are shifting the complexity from the parser
to the lexer, but it is much easier than tackling on shift/reduce
conflicts.
I introduced the second stage lexer to tweak the behavior.
Discard T_EOL if the previous token is T_EOL or T_HELPTEXT.
Two T_EOL tokens in a row is meaningless. T_HELPTEXT is a special
token that is reduced without T_EOL.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Here, similar matching patters are duplicated in order to look ahead
the '\n' character. If the next character is '\n', the lexer returns
T_WORD_QUOTE because it must be prepared to return T_EOL at the next
match.
Use unput('\n') trick to reduce the code duplication.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
All line-oriented statements should be reduced when seeing a T_EOL
token. I guess missing T_EOL for the "visible" statement is just a
mistake. This commit decreases one shift/reduce conflict.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
An unterminated string literal followed by new line is passed to the
parser (with "multi-line strings not supported" warning shown), then
handled properly there.
On the other hand, an unterminated string literal at end of file is
never passed to the parser, then results in memory leak.
[Test Code]
----------(Kconfig begin)----------
source "Kconfig.inc"
config A
bool "a"
-----------(Kconfig end)-----------
--------(Kconfig.inc begin)--------
config B
bool "b\No new line at end of file
---------(Kconfig.inc end)---------
[Summary from Valgrind]
Before the fix:
LEAK SUMMARY:
definitely lost: 16 bytes in 1 blocks
...
After the fix:
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
...
Eliminate the memory leak path by handling this case. Of course, such
a Kconfig file is wrong already, so I will add an error message later.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, warn_ignore_character() displays invalid file name and
line number.
The lexer should use current_file->name and yylineno, while the parser
should use zconf_curname() and zconf_lineno().
This difference comes from that the lexer is always going ahead
of the parser. The parser needs to look ahead one token to make a
shift/reduce decision, so the lexer is requested to scan more text
from the input file.
This commit fixes the warning message from warn_ignored_character().
[Test Code]
----(Kconfig begin)----
/
-----(Kconfig end)-----
[Output]
Before the fix:
<none>:0:warning: ignoring unsupported character '/'
After the fix:
Kconfig:1:warning: ignoring unsupported character '/'
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The only possibility of k_invalid being returned was when
expr_parse_sting() parsed S_OTHER type symbol. This actually never
happened, and this is even clearer since S_OTHER has gone.
Clean up unreachable code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The S_OTHER type could be set only when conf_read_simple() is reading
include/config/auto.conf file.
For example, CONFIG_FOO=y exists in include/config/auto.conf but it is
missing from the currently parsed Kconfig files, sym_lookup() allocates
a new symbol, and sets its type to S_OTHER.
Strangely, it will be set to S_STRING by conf_set_sym_val() a few lines
below while it is obviously bool or tristate type. On the other hand,
when CONFIG_BAR="bar" is being dropped from include/config/auto.conf,
its type remains S_OTHER. Because for_all_symbols() omits S_OTHER
symbols, conf_touch_deps() misses to touch include/config/bar.h
This behavior has been a pretty mystery for me, and digging the git
histroy did not help. At least, touching depfiles is broken for string
type symbols.
I removed S_OTHER entirely, and reimplemented it more simply.
If CONFIG_FOO was visible in the previous syncconfig, but is missing
now, what we want to do is quite simple; just call conf_touch_dep()
to touch include/config/foo.h instead of allocating a new symbol data.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
conf_touch_deps() iterates over symbols, touching corresponding
include/config/*.h files as needed.
Split the part that touches a single file into a new helper so it can
be reused.
The new helper, conf_touch_dep(), takes a symbol name as a parameter,
and touches the corresponding include/config/*.h file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
According to commit 2e3646e51b ("kconfig: integrate split config
into silentoldconfig"), this function was named after split-include
tool, which used to exist in old versions of Linux.
Setting aside the historical reason, rename it into a more intuitive
name. This function touches timestamp files under include/config/
in order to interact with the fixdep tool.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The two 'goto setsym' statements are reachable only when sym == NULL.
The code below the 'setsym:' label does nothing when sym == NULL
since there is just one if-block guarded by 'if (sym && ...)'.
Hence, 'goto setsym' can be replaced with 'continue'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In today's merge_config.sh the order of the config fragment files dictates
the output of a config option. With this approach we will get different
.config files depending on the order of the config fragment files.
So doing something like:
$ ./merge/kconfig/merge_config.sh selftest.config drm.config
Where selftest.config defines DRM=y and drm.config defines DRM=m, the
result will be "DRM=m".
Rework to add a switch to get builtin '=y' precedence over modules '=m',
this will result in "DRM=y". If we do something like this:
$ ./merge/kconfig/merge_config.sh -y selftest.config drm.config
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The current SED_CONFIG_EXP could match to comment lines in config
fragment files, especially when CONFIG_PREFIX_ is empty. For example,
Buildroot uses empty prefixing; starting symbols with BR2_ is just
convention.
Make the sed expression more robust against false positives from
comment lines. The new sed expression matches to only valid patterns.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
with CONFIG_ environment variable.
merge_config.sh uses CONFIG_ which is used in kernel and other projects.
There are some projects which use kconfig with different prefixes (e.g.
buildroot: BR2_ prefix). CONFIG_ variable is already used for this
purpose in kconfig binary (scripts/kconfig/lkc.h), let's use the same
rule for in merge_config.sh.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As commit 911a91c39c ("kconfig: rename silentoldconfig to
syncconfig") announced, it is time for the removal.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
As commit 312ee68752 ("kconfig: announce removal of oldnoconfig if
used") announced, it is time for the removal.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Meelis Roos reported a {menu,n}config regression:
"I have libncurses devel package installed in the default system
location (as do 99%+ on actual developers probably) and in this
case, pkg-config is useless. pkg-config is needed only when
libraries and headers are installed in non-default locations but
it is bad to require installation of pkg-config on all the machines
where make menuconfig would be possibly run."
For {menu,n}config, do not use pkg-config if it is not installed.
For {g,x}config, keep checking pkg-config since we really rely on it
for finding the installation paths of the required packages.
Fixes: 4ab3b80159 ("kconfig: check for pkg-config on make {menu,n,g,x}config")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
The self assignment was probably introduced by an automated code
refactoring in
commit 694c49a7c0 ("kconfig: drop localization support").
The issue was identified by a self-assign warning when running
make menuconfig with clang.
Fixes: 694c49a7c0 ("kconfig: drop localization support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The top-level Makefile invokes "make syncconfig" when necessary.
Then, Kconfig displays the following message when .config is updated.
#
# configuration written to .config
#
It is distracting because "make syncconfig" happens during the build
stage, and does nothing important in most cases.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit improves the messages of the recursive dependency.
Currently, sym->dir_dep.expr is not checked. Hence, any dependency
in property visibility is regarded as the dependency of the symbol.
[Test Code 1]
config A
bool "a"
depends on B
config B
bool "b"
depends on A
[Test Code 2]
config A
bool "a" if B
config B
bool "b"
depends on A
For both cases above, the same message is displayed:
symbol B depends on A
symbol A depends on B
This commit changes the message for the latter, like this:
symbol B depends on A
symbol A prompt is visible depending on B
Also, 'select' and 'imply' are distinguished.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dirk Gouders <dirk@gouders.net>
Currently, Kconfig does not complain about the recursive dependency
where 'imply' keywords are involved.
[Test Code]
config A
bool "a"
config B
bool "b"
imply A
depends on A
In the code above, Kconfig cannot calculate the symbol values correctly
due to the circular dependency. For example, allyesconfig followed by
syncconfig results in an odd behavior because CONFIG_B becomes visible
in syncconfig.
$ make allyesconfig
scripts/kconfig/conf --allyesconfig Kconfig
#
# configuration written to .config
#
$ cat .config
#
# Automatically generated file; DO NOT EDIT.
# Main menu
#
CONFIG_A=y
$ make syncconfig
scripts/kconfig/conf --syncconfig Kconfig
*
* Restart config...
*
*
* Main menu
*
a (A) [Y/n/?] y
b (B) [N/y/?] (NEW)
To detect this correctly, sym_check_expr_deps() should recurse to
not only sym->rev_dep.expr but also sym->implied.expr .
At this moment, sym_check_print_recursive() cannot distinguish
'select' and 'imply' since it does not know the precise context
where the recursive dependency has been hit. This will be solved
by the next commit.
In fact, even the document and the unit-test are confused. Using
'imply' does not solve recursive dependency since 'imply' addresses
the unmet direct dependency, which 'select' could cause.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dirk Gouders <dirk@gouders.net>
Originally, recursive dependency was a fatal error for Kconfig
because Kconfig cannot compute symbol values in such a situation.
Commit d595cea624 ("kconfig: print more info when we see a recursive
dependency") changed it to a warning, which I guess was not intentional.
Get it back to an error again.
Also, rename the unit test directory "warn_recursive_dep" to
"err_recursive_dep" so that it matches to the behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dirk Gouders <dirk@gouders.net>
Add build-only targets for build_menuconfig, build_nconfig,
build_xconfig, and build_gconfig.
(targets must end in "config" to qualify in top-level Makefile)
This allows these target to be built without execution (e.g., to
look for errors or warnings) and/or to be built and checked by sparse.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- show clearer error messages where pkg-config is needed, but not
installed
- rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
- create all necessary directories by Kconfig tool itself instead
of Makefile
- update the .config unconditionally when syncconfig is invoked
- use 'include' directive instead of '-include' where
include/config/{auto,tristate}.conf is mandatory
- do not try to update the .config when running install targets
- add .DELETE_ON_ERROR to delete partially updated files
- misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbdFbBAAoJED2LAQed4NsGJbQP/icdG5Cj8YVuIlqBEe50KkbT
V0jJdCyxSSUXiuTaGlFJ4RFlcbH9+4JcMdGIHqRrrtW0UpqXNcHgIOjbCaq4zLCw
oRtva0/VC3KVlNDZR702t58t8os3qS03XuuRd1bBao19Mje7YOtHGrBfaEmZ3TIV
jn9TX3K8PxPE8NLRuY5P3OT4fEeeUwXbleo5RuReQR8mWY3p6Gf8YjJ/mxDnoSbF
gnot+ahWKdvJBjAbbTgoFePM7zOp4YA6Z1Nw0OerXKbchLG2D/wyDNbS2AnME3TR
RSFuEZL3LqkZlVN1q7oQ0kzVuafghcUSx5LiRovejw7ZRemU30ixqSTZ6w6aL3X8
nvm+arCGPS85v6RiPEnDMI9iXaqA0+yhwdKi3OLhoOEz+Y8G74JkOZErIoVpE2Ok
wrSrmLzLzx6kcOaL50hhWQ5Jm3SGclFO1+uEcMP2vSRrrUJlkrBRvpLm+BInFVYS
HnifGBSD73+UIrVmAcEM30YXUX4kFDoLWUd659nop270vr1JZr2/ie+WODH/fsfn
aSDQq7AUbwybYHcSnzrv/eiZ5xiDBXcfRsvAcjpwzrUzpj6mM95XwBFOk7O/4a5w
SuXiMSPbf/zemKhVp2wk6/nxS8SI07qEpXYMRcf3JL/kcT0KDg2/sPou//beYC56
/s3cTXUlMrG7KTTfr0jz
=/Dow
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- show clearer error messages where pkg-config is needed, but not
installed
- rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
- create all necessary directories by Kconfig tool itself instead of
Makefile
- update the .config unconditionally when syncconfig is invoked
- use 'include' directive instead of '-include' where
include/config/{auto,tristate}.conf is mandatory
- do not try to update the .config when running install targets
- add .DELETE_ON_ERROR to delete partially updated files
- misc cleanups and fixes
* tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove P_ENV property type
kconfig: remove unused sym_get_env_prop() function
kconfig: fix the rule of mainmenu_stmt symbol
init/Kconfig: Use short unix-style option instead of --longname
Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatory
kbuild: remove auto.conf from prerequisite of phony targets
kbuild: do not update config for 'make kernelrelease'
kbuild: do not update config when running install targets
kbuild: add .DELETE_ON_ERROR special target
kbuild: use 'include' directive to load auto.conf from top Makefile
kconfig: allow all config targets to write auto.conf if missing
kconfig: make syncconfig update .config regardless of sym_change_count
kconfig: create directories needed for syncconfig by itself
kconfig: remove unneeded directory generation from local*config
kconfig: split out useful helpers in confdata.c
kconfig: rename file_write_dep and move it to confdata.c
kconfig: fix typos in description of "choice" in kconfig-language.txt
kconfig: handle format string before calling conf_message_callback()
kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE
kconfig: check for pkg-config on make {menu,n,g,x}config
This property is not set by anyone since commit 104daea149 ("kconfig:
reference environment variables directly and remove 'option env='").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
This function is unused since commit 104daea149 ("kconfig: reference
environment variables directly and remove 'option env='").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
The rule of mainmenu_stmt does not have debug print of zconf_lineno(),
but if it had, it would print a wrong line number for the same reason
as commit b2d00d7c61 ("kconfig: fix line numbers for if-entries in
menu tree").
The mainmenu_stmt does not need to eat following empty lines because
they are reduced to common_stmt.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, only syncconfig creates or updates include/config/auto.conf
and some other files. Other config targets create or update only the
.config file.
When you configure and build the kernel from a pristine source tree,
any config target is followed by syncconfig in the build stage since
include/config/auto.conf is missing.
We are moving compiler tests from Makefile to Kconfig. It means that
parsing Kconfig files will be more costly since Kconfig invokes the
compiler commands internally. Thus, we want to avoid invoking Kconfig
twice (one for *config to create the .config, and one for syncconfig
to synchronize the auto.conf). If auto.conf does not exist, we can
generate all configuration files in the first configuration stage,
which will save the syncconfig in the build stage.
Please note this should be done only when auto.conf is missing. If
*config blindly did this, time stamp files under include/config/ would
be unnecessarily touched, triggering unneeded rebuild of objects.
I assume a scenario like this:
1. You have a source tree that has already been built
with CONFIG_FOO disabled
2. Run "make menuconfig" to enable CONFIG_FOO
3. CONFIG_FOO turns out to be unnecessary.
Run "make menuconfig" again to disable CONFIG_FOO
4. Run "make"
In this case, include/config/foo.h should not be touched since there
is no change in CONFIG_FOO. The sync process should be delayed until
the user really attempts to build the kernel.
This commit has another motivation; I want to suppress the 'No such
file or directory' warning from the 'include' directive.
The top-level Makefile includes auto.conf with '-include' directive,
like this:
ifeq ($(dot-config),1)
-include include/config/auto.conf
endif
This looks strange because auto.conf is mandatory when dot-config is 1.
I guess only the reason of using '-include' is to suppress the warning
'include/config/auto.conf: No such file or directory' when building
from a clean tree. However, this has a side-effect; Make considers
the files included by '-include' are optional. Hence, Make continues
to build even if it fails to generate include/config/auto.conf. I will
change this in the next commit, but the warning message is annoying.
(At least, kbuild test robot reports it as a regression.)
With this commit, Kconfig will generate all configuration files together
with the .config and I guess it is a solution good enough to suppress
the warning.
Note:
GNU Make 4.2 or later does not display the warning from the 'include'
directive if include files are successfully generated. See GNU Make
commit 87a5f98d248f ("[SV 102] Don't show unnecessary include file
errors.") However, older GNU Make versions are still widely used.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
syncconfig updates the .config only when sym_change_count > 0, i.e.
any change in config symbols has been detected.
Not only symbols but also comments are contained in the .config file.
If only comments are updated, they are not fed back to the .config,
then the stale comments are left-over. Of course, this is just a
matter of comments, but why not fix it.
I see some scenarios where this happens.
Scenario A:
1. You have a source tree that has already been configured.
2. Linus increments the version number in the top-level Makefile
(i.e. he commits a new release)
3. You pull it, and run 'make'
4. syncconfig is invoked because the environment variable,
KERNELVERSION is updated, but the .config is not updated since
no config symbol is changed.
5. The .config file contains a kernel version in the top line:
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 4.18.0-rc2 Kernel Configuration
... which points to a previous version.
Scenario B:
1. You have a source tree that has already been configured.
2. You upgrade the compiler, but it still has the same version number.
This may happen if you regularly build the latest compiler from
the source code.
3. You run 'make'
4. syncconfig is invoked because the environment variable,
CC_VERSION_TEXT is updated, but the .config is not updated since
no config symbol is changed.
5. The .config file contains the version string of the compiler:
#
# Compiler: aarch64-linux-gcc (GCC) 9.0.0 20180628 (experimental)
#
... which carries the information of the old compiler.
If KCONFIG_NOSILENTUPDATE is set, syncconfig is not allowed to update
the .config file. Otherwise, it is fine to update it regardless of
sym_change_count.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
'make syncconfig' creates some files such as include/config/auto.conf,
include/generate/autoconf.h, etc. but the necessary directory creation
relies on scripts/kconfig/Makefile.
To make Kconfig self-contained, create directories as needed in
conf_write_autoconf().
This change allows scripts/kconfig/Makefile cleanups; syncconfig can
be merged into simple-targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 17263baf95 ("kconfig: Create include/generated for
localmodconfig") added the 'mkdir' line because local{yes,mod}config
ran streamline_config.pl followed by silentoldconfig at that time.
Since commit 81d2bc2273 ("kconfig: invoke oldconfig instead of
silentoldconfig from local*config"), no sub-directory is required.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Split out helpers:
is_present() - check if the given path exists
is_dir() - check if the given path exists and it is a directory
make_parent_dir() - create the parent directories of the given path
These helpers will be reused in later commits.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
file_write_dep() is called only from conf_write_autoconf().
Move it from util.c to confdata.c to make it static.
Also, rename it to conf_write_dep() since it should belong to
the group of conf_write* functions.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As you see in mconf.c and nconf.c, conf_message_callback() hooks are
likely to end up with the boilerplate of vsnprintf(). Process the
string format before calling conf_message_callback() so that it
receives a simple string.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Dirk Gouders <dirk@gouders.net>
Over time, the use of the flag SYMBOL_AUTO changed from initially
marking three automatically generated symbols ARCH, KERNELRELEASE and
UNAME_RELEASE to today's effect of protecting symbols from being
written out.
Currently, only symbols of type CHOICE and those with option
defconf_list set have that flag set.
Reflect that change in semantics in the flag's name.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Each of 'make {menu,n,g,x}config' uses (needs) pkg-config to make sure
that other required files are present and to determine build flags
settings, but none of these check that pkg-config itself is present.
Add a check for all 4 of these targets and update
Documentation/process/changes.rst to mention 'pkg-config'.
Fixes kernel bugzilla #77511:
https://bugzilla.kernel.org/show_bug.cgi?id=77511
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If buf[-1] just happens to hold the byte 0x0A, then nread can wrap around
to (size_t)-1, leading to invalid memory accesses.
This has caused segmentation faults when trying to build the latest
kernel snapshots for i686 in Fedora:
https://bugzilla.redhat.com/show_bug.cgi?id=1592374
Signed-off-by: Jerry James <loganjerry@gmail.com>
[alexpl@fedoraproject.org: reformatted patch for submission]
Signed-off-by: Alexander Ploumistos <alexpl@fedoraproject.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Each symbol has a property of type P_SYMBOL since commit
59e89e3ddf (kconfig: save location of config symbols).
Handle those properties in print_symbol().
Further, place a pointer to print_symbol() in the comment above the
list of known property type.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The line numers for if-entries in the menu tree are off by one or more
lines which is confusing when debugging for correctness of unrelated changes.
According to the git log, commit a02f0570ae (kconfig: improve
error handling in the parser) was the last one that changed that part
of the parser and replaced
"if_entry: T_IF expr T_EOL"
by
"if_entry: T_IF expr nl"
but the commit message does not state why this has been done.
When reverting that part of the commit, only the line numers are
corrected (checked with cdebug = DEBUG_PARSE in zconf.y), otherwise
the menu tree remains unchanged (checked with zconfdump() enabled in
conf.c).
An example for the corrected line numbers:
drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig
drivers/soc/tegra/Kconfig:4:if
drivers/soc/tegra/Kconfig:6:if
changes to:
drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig
drivers/soc/tegra/Kconfig:1:if
drivers/soc/tegra/Kconfig:4:if
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When kconfig syntax moved to use $(FOO) for environment variables
localmodconfig was not updated.
Fix so it now works with the new syntax $(FOO)
Fixes: 104daea149 ("kconfig: reference environment variables directly and remove 'option env='")
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In file included from scripts/kconfig/zconf.tab.c:2485:
scripts/kconfig/confdata.c: In function ‘conf_write’:
scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
sprintf(newname, "%s%s", dirname, basename);
^~
scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes
sprintf(newname, "%s%s", dirname, basename);
^~~~~~
scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097
sprintf(newname, "%s%s", dirname, basename);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
^~~~~~~~~~~
scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097
sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Increase the size of tmpname and newname to make GCC happy.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When using a recursively expanded variable, it is a common mistake
to make circular reference.
For example, Make terminates the following code:
X = $(X)
Y := $(X)
Let's detect the circular expansion in Kconfig, too.
On the other hand, a function that recurses itself is a commonly-used
programming technique. So, Make does not check recursion in the
reference with 'call'. For example, the following code continues
running eternally:
X = $(call X)
Y := $(X)
Kconfig allows circular expansion if one or more arguments are given,
but terminates when the same function is recursively invoked 1000 times,
assuming it is a programming mistake.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The special variables, $(filename) and $(lineno), are expanded to a
file name and its line number being parsed, respectively.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Syntax:
$(info,<text>)
$(warning-if,<condition>,<text>)
$(error-if,<condition>,<text)
The 'info' function prints a message to stdout as in Make.
The 'warning-if' and 'error-if' are similar to 'warning' and 'error'
in Make, but take the condition parameter. They are effective only
when the <condition> part is y.
Kconfig does not implement the lazy expansion as used in the 'if'
'and, 'or' functions in Make. In other words, Kconfig does not
support conditional expansion. The unconditional 'error' function
would always terminate the parsing, hence would be useless in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Make expands the lefthand side of assignment statements. In fact,
Kbuild relies on it since kernel makefiles mostly look like this:
obj-$(CONFIG_FOO) += foo.o
Do likewise in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Support += operator. This appends a space and the text on the
righthand side to a variable.
The timing of the evaluation of the righthand side depends on the
flavor of the variable. If the lefthand side was originally defined
as a simple variable, the righthand side is expanded immediately.
Otherwise, the expansion is deferred. Appending something to an
undefined variable results in a recursive variable.
To implement this, we need to remember the flavor of variables.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The previous commit added variable and user-defined function. They
work similarly in the sense that the evaluation is deferred until
they are used.
This commit adds another type of variable, simply expanded variable,
as we see in Make.
The := operator defines a simply expanded variable, expanding the
righthand side immediately. This works like traditional programming
language variables.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now, we got a basic ability to test compiler capability in Kconfig.
config CC_HAS_STACKPROTECTOR
def_bool $(shell,($(CC) -Werror -fstack-protector -E -x c /dev/null -o /dev/null 2>/dev/null) && echo y || echo n)
This works, but it is ugly to repeat this long boilerplate.
We want to describe like this:
config CC_HAS_STACKPROTECTOR
bool
default $(cc-option,-fstack-protector)
It is straight-forward to add a new function, but I do not like to
hard-code specialized functions like that. Hence, here is another
feature, user-defined function. This works as a textual shorthand
with parameterization.
A user-defined function is defined by using the = operator, and can
be referenced in the same way as built-in functions. A user-defined
function in Make is referenced like $(call my-func,arg1,arg2), but I
omitted the 'call' to make the syntax shorter.
The definition of a user-defined function contains $(1), $(2), etc.
in its body to reference the parameters. It is grammatically valid
to pass more or fewer arguments when calling it. We already exploit
this feature in our makefiles; scripts/Kbuild.include defines cc-option
which takes two arguments at most, but most of the callers pass only
one argument.
By the way, a variable is supported as a subset of this feature since
a variable is "a user-defined function with zero argument". In this
context, I mean "variable" as recursively expanded variable. I will
add a different flavored variable in the next commit.
The code above can be written as follows:
[Example Code]
success = $(shell,($(1)) >/dev/null 2>&1 && echo y || echo n)
cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
config CC_HAS_STACKPROTECTOR
def_bool $(cc-option,-fstack-protector)
[Result]
$ make -s alldefconfig && tail -n 1 .config
CONFIG_CC_HAS_STACKPROTECTOR=y
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, any statement line starts with a keyword with TF_COMMAND
flag. So, the following three lines are dead code.
alloc_string(yytext, yyleng);
zconflval.string = text;
return T_WORD;
If a T_WORD token is returned in this context, it will cause syntax
error in the parser anyway.
The next commit will support the assignment statement where a line
starts with an arbitrary identifier. So, I want the lexer to switch
to the PARAM state only when it sees a command keyword.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This accepts a single command to execute. It returns the standard
output from it.
[Example code]
config HELLO
string
default "$(shell,echo hello world)"
config Y
def_bool $(shell,echo y)
[Result]
$ make -s alldefconfig && tail -n 2 .config
CONFIG_HELLO="hello world"
CONFIG_Y=y
Caveat:
Like environments, functions are expanded in the lexer. You cannot
pass symbols to function arguments. This is a limitation to simplify
the implementation. I want to avoid the dynamic function evaluation,
which would introduce much more complexity.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit adds a new concept 'function' to do more text processing
in Kconfig.
A function call looks like this:
$(function,arg1,arg2,arg3,...)
This commit adds the basic infrastructure to expand functions.
Change the text expansion helpers to take arguments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If "mainmenu" is not specified, "Linux Kernel Configuration" is used
as a default prompt.
Given that Kconfig is used in other projects than Linux, let's use
a more generic prompt, "Main menu".
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no more caller of sym_expand_string_value().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Now that environments are expanded in the lexer, conf_parse() does
not need to expand them explicitly.
The hack introduced by commit 0724a7c32a ("kconfig: Don't leak
main menus during parsing") can go away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
There are two callers of file_lookup(), but there is no more reason
to expand the given path.
[1] zconf_initscan()
This is used to open the first Kconfig. sym_expand_string_value()
has never been used in a useful way here; before opening the first
Kconfig file, obviously there is no symbol to expand. If you use
expand_string_value() instead, environments in KBUILD_KCONFIG would
be expanded, but I do not see practical benefits for that.
[2] zconf_nextfile()
This is used to open the next file from 'source' statement.
Symbols in the path like "arch/$SRCARCH/Kconfig" needed expanding,
but it was replaced with the direct environment expansion. The
environment has already been expanded before the token is passed
to the parser.
By the way, file_lookup() was already buggy; it expanded a given path,
but it used the path before expansion for look-up:
if (!strcmp(name, file->name)) {
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax. It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.
Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
- conf_expand_value()
This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
- sym_expand_string_value()
This is used to expand strings in 'source' and 'mainmenu'
All of them are fixed values independent of user configuration. So,
they can be changed into the direct expansion instead of symbols.
This change makes the code much cleaner. The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.
sym_init() hard-coding 'UNAME_RELEASE' is also gone. 'UNAME_RELEASE'
should be replaced with an environment variable.
ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.
The new syntax is addicted by Make. The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F. Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.
At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.
The variables are expanded in the lexer so we can simplify the token
handling on the parser side.
For example, the following code works.
[Example code]
config MY_TOOLCHAIN_LIST
string
default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"
[Result]
$ make -s alldefconfig && tail -n 1 .config
CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
The localization support is broken and appears unused.
There is no google hits on the update-po-config target.
And there is no recent (5 years) activity related to the localization.
So lets just drop this as it is no longer used.
Suggested-by: Ulf Magnusson <ulfalizer@gmail.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The mconf (or its infrastructure, lxdiaglog) depends on the ncurses.
Move and rename check-lxdialog.sh to mconf-cfg.sh to make it work in
the same way as for qconf and gconf.
This commit fixes some more weirdnesses.
The nconf also needs ncurses packages. HOSTLOADLIBES_nconf is set
to the libraries needed for nconf, but the cflags is not explicitly
set. Actually, nconf relies on the check-lxdialog.sh for the proper
cflags:
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
-DLOCALE
The code above passes the ncurses flags to all objects, even for conf,
qconf, gconf. Let's pass the ncurses flags only to mconf and nconf.
Currently, the presence of ncurses is not checked for nconf. Let's
show a prompt like the mconf case.
According to Randy's report, the shell scripts still need to carry
the fallback code in case the pkg-config fails to find the ncurses
packages.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Refactor the package checks for gconf in the same way as for qconf.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Currently, the necessary package checks for building qconf is
surrounded by ifeq ($(MAKECMDGOALS),xconfig) ... endif.
Then, Make will restart when .tmp_qtcheck is generated.
To simplify the Makefile, move the scripting to a separate file,
and use filechk. The shell script is executed everytime xconfig
is run, but it is not a costly script.
In the old code, 'pkg-config --exists' only checked Qt5Core / QtCore,
but the set of necessary packages should be checked.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
We at Red Hat/Fedora have generally tried to have a per file breakdown of
every config option we set. This makes it easy for us to add new options
when they are exposed and keep a changelog of why they were set.
A Fedora example is here:
https://src.fedoraproject.org/cgit/rpms/kernel.git/tree/configs/fedora/generic
Using various merge scripts, we build up a config file and run it through
'make listnewconfig' and 'make oldnoconfig'. The idea is to print out new
config options that haven't been manually set and use the default until
a patch is posted to set it properly.
To speed things up, it would be nice to make it easier to generate a
patch to post the default setting. The output of 'make listnewconfig'
has two issues that limit us:
- it doesn't provide the default value
- it doesn't provide the new 'choice' options that get flagged in
'oldconfig'
This patch extends 'listnewconfig' to address the above two issues.
This allows us to run a script
make listnewconfig | rhconfig-tool -o patches; git send-email patches/
The output of 'make listnewconfig':
CONFIG_NET_EMATCH_IPT
CONFIG_IPVLAN
CONFIG_ICE
CONFIG_NET_VENDOR_NI
CONFIG_IEEE802154_MCR20A
CONFIG_IR_IMON_DECODER
CONFIG_IR_IMON_RAW
The new output of 'make listnewconfig':
CONFIG_KERNEL_XZ=n
CONFIG_KERNEL_LZO=n
CONFIG_NET_EMATCH_IPT=n
CONFIG_IPVLAN=n
CONFIG_ICE=n
CONFIG_NET_VENDOR_NI=y
CONFIG_IEEE802154_MCR20A=n
CONFIG_IR_IMON_DECODER=n
CONFIG_IR_IMON_RAW=n
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Files generated by if_changed* must be added to 'targets' to include
*.cmd files. Otherwise, they would be regenerated every time.
The build system automatically adds objects to 'targets' where
appropriate, such as obj-y, extra-y, etc. but does nothing for
intermediate files. So, each Makefile needs to add them by itself.
There are some common cases where objects are generated by chained
rules. Lexers and parsers are compiled like follows:
%.lex.o <- %.lex.c <- %.l
%.tab.o <- %.tab.c <- %.y
They are common patterns, so it is reasonable to take care of them
in the core Makefile instead of requiring each Makefile to do so.
At this moment, you cannot delete 'target += zconf.lex.c' in the
Kconfig Makefile because zconf.lex.c is included from zconf.tab.c
instead of being compiled separately. It should be deleted after
Kconfig is more refactored.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers,
respectively. Clean them up globally from the top Makefile.
Some of the final host programs those lexer/parser are linked into
are necessary for building external modules, but the intermediates
are unneeded. They can be cleaned away by 'make clean' instead of
'make mrproper'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
These patterns are common to host programs that require lexer and parser.
Move them to the top .gitignore.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
- improve checkpatch for more precise Kconfig code checking
- clarify effective selects by grouping reverse dependencies in help
- do not write out '# CONFIG_FOO is not set' from invisible symbols
- make oldconfig as silent as it should be
- rename 'silentoldconfig' to 'syncconfig'
- add unit-test framework and several test cases
- warn unmet dependency of tristate symbols
- make unmet dependency warnings readable, removing false positives
- improve recursive include detection
- use yylineno to simplify the line number tracking
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sKto
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- improve checkpatch for more precise Kconfig code checking
- clarify effective selects by grouping reverse dependencies in help
- do not write out '# CONFIG_FOO is not set' from invisible symbols
- make oldconfig as silent as it should be
- rename 'silentoldconfig' to 'syncconfig'
- add unit-test framework and several test cases
- warn unmet dependency of tristate symbols
- make unmet dependency warnings readable, removing false positives
- improve recursive include detection
- use yylineno to simplify the line number tracking
- misc cleanups
* tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kconfig: use yylineno option instead of manual lineno increments
kconfig: detect recursive inclusion earlier
kconfig: remove duplicated file name and lineno of recursive inclusion
kconfig: do not include both curses.h and ncurses.h for nconfig
kconfig: make unmet dependency warnings readable
kconfig: warn unmet direct dependency of tristate symbols selected by y
kconfig: tests: test if recursive inclusion is detected
kconfig: tests: test if recursive dependencies are detected
kconfig: tests: test randconfig for choice in choice
kconfig: tests: test defconfig when two choices interact
kconfig: tests: check visibility of tristate choice values in y choice
kconfig: tests: check unneeded "is not set" with unmet dependency
kconfig: tests: test if new symbols in choice are asked
kconfig: tests: test automatic submenu creation
kconfig: tests: add basic choice tests
kconfig: tests: add framework for Kconfig unit testing
kbuild: add PYTHON2 and PYTHON3 variables
kconfig: remove redundant streamline_config.pl prerequisite
kconfig: rename silentoldconfig to syncconfig
kconfig: invoke oldconfig instead of silentoldconfig from local*config
...
Tracking the line number by hand is error-prone since you need to
increment it in every \n matching pattern.
If '%option yylineno' is set, flex defines 'yylineno' to contain the
current line number and automatically updates it each time it reads a
\n character. This is much more convenient although the lexer does
not initializes yylineno, so you need to set it to 1 each time you
start reading a new file, and restore it you go back to the previous
file.
I tested this with DEBUG_PARSE, and confirmed the same dump message
was produced.
I removed the perf-report option. Otherwise, I see the following
message:
%option yylineno entails a performance penalty ONLY on rules that
can match newline characters
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, the recursive inclusion is not detected when the offending
file is about to be included; it is detected the offending file is
about to include the *next* file. This is because the detection loop
does not involve the file being included.
Do this check against the file that is about to be included so that
the recursive inclusion is detected before unneeded parsing happens.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As in the unit test, the error message for the recursive inclusion
looks like this:
Kconfig.inc1:4: recursive inclusion detected. Inclusion path:
current file : 'Kconfig.inc1'
included from: 'Kconfig.inc3:1'
included from: 'Kconfig.inc2:3'
included from: 'Kconfig.inc1:4'
The 'Kconfig.inc1:4' is duplicated in the first and last lines.
Also, the single quotes do not help readability.
Change the message like follows:
Recursive inclusion detected.
Inclusion path:
current file : Kconfig.inc1
included from: Kconfig.inc3:1
included from: Kconfig.inc2:3
included from: Kconfig.inc1:4
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
nconf.h includes <curses.h> and "ncurses.h", but it does not need to
include both. Generally, it should fall back to curses.h only when
ncurses.h is not found. But, looks like it has never happened;
these includes have been here for many years since commit 692d97c380
("kconfig: new configuration interface (nconfig)"), and nobody has
complained about hard-coding of ncurses.h . Let's simply drop the
curses.h inclusion.
I replaced "ncurses.h" with <ncurses.h> since it is not a local file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>