Commit Graph

508 Commits

Author SHA1 Message Date
Steven Rostedt
9fd49328fc ftrace: Sort all function addresses, not just per page
Instead of just sorting the ip's of the functions per ftrace page,
sort the entire list before adding them to the ftrace pages.

This will allow the bsearch algorithm to be sped up as it can
also sort by pages, not just records within a page.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-16 19:58:44 -04:00
Jiri Olsa
50e18b94c6 tracing: Use seq_*_private interface for some seq files
It's appropriate to use __seq_open_private interface to open
some of trace seq files, because it covers all steps we are
duplicating in tracing code - zallocating the iterator and
setting it as seq_file's private.

Using this for following files:
  trace
  available_filter_functions
  enabled_functions

Link: http://lkml.kernel.org/r/1335342219-2782-5-git-send-email-jolsa@redhat.com

Signed-off-by: Jiri Olsa <jolsa@redhat.com>

[
 Fixed warnings for:
   kernel/trace/trace.c: In function '__tracing_open':
   kernel/trace/trace.c:2418:11: warning: unused variable 'ret' [-Wunused-variable]
   kernel/trace/trace.c:2417:19: warning: unused variable 'm' [-Wunused-variable]
]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-08 21:04:12 -04:00
Rajesh Bhagat
db6544e007 ftrace: Fix function_graph for archs that test ftrace_trace_function
When CONFIG_DYNAMIC_FTRACE is not set, some archs (ARM) test
the variable function_trace_function to determine if it should
call the function tracer. If it is not set to ftrace_stub, then
it will call the function and return, and not call the function
graph tracer.

But some of these archs (ARM) do not have the assembly code
to test if function tracing is enabled or not (quick stop of tracing)
and it calls the helper routine ftrace_test_stop_func() instead.

If function tracer is enabled and then disabled, the variable
ftrace_trace_function is still set to the helper routine
ftrace_test_stop_func(), and not to ftrace_stub. This will
prevent the function graph tracer from ever running.

Output before patch
/debug/tracing # echo function > current_tracer
/debug/tracing # echo function_graph > current_tracer
/debug/tracing # cat trace

Output after patch
/debug/tracing # echo function > current_tracer
/debug/tracing # echo function_graph > current_tracer
/debug/tracing # cat trace
0) ! 253.375 us | } /* irq_enter */
0) | generic_handle_irq() {
0) | handle_fasteoi_irq() {
0) 9.208 us | _raw_spin_lock();
0) | handle_irq_event() {
0) | handle_irq_event_percpu() {

Signed-off-by: Rajesh Bhagat <rajesh.lnx@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-13 15:07:37 -04:00
Jiri Olsa
5500fa5119 ftrace, perf: Add filter support for function trace event
Adding support to filter function trace event via perf
interface. It is now possible to use filter interface
in the perf tool like:

  perf record -e ftrace:function --filter="(ip == mm_*)" ls

The filter syntax is restricted to the the 'ip' field only,
and following operators are accepted '==' '!=' '||', ending
up with the filter strings like:

  ip == f1[, ]f2 ... || ip != f3[, ]f4 ...

with comma ',' or space ' ' as a function separator. If the
space ' ' is used as a separator, the right side of the
assignment needs to be enclosed in double quotes '"', e.g.:

  perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls
  perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls
  perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls

The '==' operator adds trace filter with same effect as would
be added via set_ftrace_filter file.

The '!=' operator adds trace filter with same effect as would
be added via set_ftrace_notrace file.

The right side of the '!=', '==' operators is list of functions
or regexp. to be added to filter separated by space.

The '||' operator is used for connecting multiple filter definitions
together. It is possible to have more than one '==' and '!='
operators within one filter string.

Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21 11:08:30 -05:00
Jiri Olsa
e248491ac2 ftrace: Add enable/disable ftrace_ops control interface
Adding a way to temporarily enable/disable ftrace_ops. The change
follows the same way as 'global' ftrace_ops are done.

Introducing 2 global ftrace_ops - control_ops and ftrace_control_list
which take over all ftrace_ops registered with FTRACE_OPS_FL_CONTROL
flag. In addition new per cpu flag called 'disabled' is also added to
ftrace_ops to provide the control information for each cpu.

When ftrace_ops with FTRACE_OPS_FL_CONTROL is registered, it is
set as disabled for all cpus.

The ftrace_control_list contains all the registered 'control' ftrace_ops.
The control_ops provides function which iterates ftrace_control_list
and does the check for 'disabled' flag on current cpu.

Adding 3 inline functions:
  ftrace_function_local_disable/ftrace_function_local_enable
  - enable/disable the ftrace_ops on current cpu
  ftrace_function_local_disabled
  - get disabled ftrace_ops::disabled value for current cpu

Link: http://lkml.kernel.org/r/1329317514-8131-2-git-send-email-jolsa@redhat.com

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21 11:08:23 -05:00
Thomas Meyer
47b0edcb59 tracing/trivial: Use kcalloc instead of kzalloc to allocate array
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107

Link: http://lkml.kernel.org/r/1322600880.1534.347.camel@localhost.localdomain

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-13 13:48:11 -05:00
Jiri Olsa
ac483c446b ftrace: Change filter/notrace set functions to return exit code
Currently the ftrace_set_filter and ftrace_set_notrace functions
do not return any return code. So there's no way for ftrace_ops
user to tell wether the filter was correctly applied.

The set_ftrace_filter interface returns error in case the filter
did not match:

  # echo krava > set_ftrace_filter
  bash: echo: write error: Invalid argument

Changing both ftrace_set_filter and ftrace_set_notrace functions
to return zero if the filter was applied correctly or -E* values
in case of error.

Link: http://lkml.kernel.org/r/1325495060-6402-2-git-send-email-jolsa@redhat.com

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 09:48:18 -05:00
Steven Rostedt
2a85a37f16 ftrace: Allow access to the boot time function enabling
Change set_ftrace_early_filter() to ftrace_set_early_filter()
and make it a global function. This will allow other subsystems
in the kernel to be able to enable function tracing at start
up and reuse the ftrace function parsing code.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:26:35 -05:00
Steven Rostedt
69a3083c4a ftrace: Decouple hash items from showing filtered functions
The set_ftrace_filter shows "hashed" functions, which are functions
that are added with operations to them (like traceon and traceoff).

As other subsystems may be able to show what functions they are
using for function tracing, the hash items should no longer
be shown just because the FILTER flag is set. As they have nothing
to do with other subsystems filters.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:25:24 -05:00
Steven Rostedt
fc13cb0ce4 ftrace: Allow other users of function tracing to use the output listing
The function tracer is set up to allow any other subsystem (like perf)
to use it. Ftrace already has a way to list what functions are enabled
by the global_ops. It would be very helpful to let other users of
the function tracer to be able to use the same code.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:25:06 -05:00
Steven Rostedt
06a51d9307 ftrace: Create ftrace_hash_empty() helper routine
There are two types of hashes in the ftrace_ops; one type
is the filter_hash and the other is the notrace_hash. Either
one may be null, meaning it has no elements. But when elements
are added, the hash is allocated.

Throughout the code, a check needs to be made to see if a hash
exists or the hash has elements, but the check if the hash exists
is usually missing causing the possible "NULL pointer dereference bug".

Add a helper routine called "ftrace_hash_empty()" that returns
true if the hash doesn't exist or its count is zero. As they mean
the same thing.

Last-bug-reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:23:11 -05:00
Steven Rostedt
c842e97552 ftrace: Fix ftrace hash record update with notrace
When disabling the "notrace" records, that means we want to trace them.
If the notrace_hash is zero, it means that we want to trace all
records. But to disable a zero notrace_hash means nothing.

The check for the notrace_hash count was incorrect with:

	if (hash && !hash->count)
		return

With the correct comment above it that states that we do nothing
if the notrace_hash has zero count. But !hash also means that
the notrace hash has zero count. I think this was done to
protect against dereferencing NULL. But if !hash is true, then
we go through the following loop without doing a single thing.

Fix it to:

	if (!hash || !hash->count)
		return;

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:21:43 -05:00
Steven Rostedt
5855fead9c ftrace: Use bsearch to find record ip
Now that each set of pages in the function list are sorted by
ip, we can use bsearch to find a record within each set of pages.
This speeds up the ftrace_location() function by magnitudes.

For archs (like x86) that need to add a breakpoint at every function
that will be converted from a nop to a callback and vice versa,
the breakpoint callback needs to know if the breakpoint was for
ftrace or not. It requires finding the breakpoint ip within the
records. Doing a linear search is extremely inefficient. It is
a must to be able to do a fast binary search to find these locations.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:20:50 -05:00
Steven Rostedt
68950619f8 ftrace: Sort the mcount records on each page
Sort records by ip locations of the ftrace mcount calls on each of the
set of pages in the function list. This helps in localizing cache
usuage when updating the function locations, as well as gives us
the ability to quickly find an ip location in the list.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:19:58 -05:00
Steven Rostedt
85ae32ae01 ftrace: Replace record newlist with record page list
As new functions come in to be initalized from mcount to nop,
they are done by groups of pages. Whether it is the core kernel
or a module. There's no need to keep track of these on a per record
basis.

At startup, and as any module is loaded, the functions to be
traced are stored in a group of pages and added to the function
list at the end. We just need to keep a pointer to the first
page of the list that was added, and use that to know where to
start on the list for initializing functions.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:19:03 -05:00
Steven Rostedt
a790087554 ftrace: Allocate the mcount record pages as groups
Allocate the mcount record pages as a group of pages as big
as can be allocated and waste no more than a single page.

Grouping the mcount pages as much as possible helps with cache
locality, as we do not need to redirect with descriptors as we
cross from page to page. It also allows us to do more with the
records later on (sort them with bigger benefits).

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:18:30 -05:00
Steven Rostedt
3208230983 ftrace: Remove usage of "freed" records
Records that are added to the function trace table are
permanently there, except for modules. By separating out the
modules to their own pages that can be freed in one shot
we can remove the "freed" flag and simplify some of the record
management.

Another benefit of doing this is that we can also move the
records around; sort them.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:17:57 -05:00
Steven Rostedt
c88fd8634e ftrace: Allow archs to modify code without stop machine
The stop machine method to modify all functions in the kernel
(some 20,000 of them) is the safest way to do so across all archs.
But some archs may not need this big hammer approach to modify code
on SMP machines, and can simply just update the code it needs.

Adding a weak function arch_ftrace_update_code() that now does the
stop machine, will also let any arch override this method.

If the arch needs to check the system and then decide if it can
avoid stop machine, it can still call ftrace_run_stop_machine() to
use the old method.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:16:58 -05:00
Jiri Olsa
30fb6aa740 ftrace: Fix unregister ftrace_ops accounting
Multiple users of the function tracer can register their functions
with the ftrace_ops structure. The accounting within ftrace will
update the counter on each function record that is being traced.
When the ftrace_ops filtering adds or removes functions, the
function records will be updated accordingly if the ftrace_ops is
still registered.

When a ftrace_ops is removed, the counter of the function records,
that the ftrace_ops traces, are decremented. When they reach zero
the functions that they represent are modified to stop calling the
mcount code.

When changes are made, the code is updated via stop_machine() with
a command passed to the function to tell it what to do. There is an
ENABLE and DISABLE command that tells the called function to enable
or disable the functions. But the ENABLE is really a misnomer as it
should just update the records, as records that have been enabled
and now have a count of zero should be disabled.

The DISABLE command is used to disable all functions regardless of
their counter values. This is the big off switch and is not the
complement of the ENABLE command.

To make matters worse, when a ftrace_ops is unregistered and there
is another ftrace_ops registered, neither the DISABLE nor the
ENABLE command are set when calling into the stop_machine() function
and the records will not be updated to match their counter. A command
is passed to that function that will update the mcount code to call
the registered callback directly if it is the only one left. This
means that the ftrace_ops that is still registered will have its callback
called by all functions that have been set for it as well as the ftrace_ops
that was just unregistered.

Here's a way to trigger this bug. Compile the kernel with
CONFIG_FUNCTION_PROFILER set and with CONFIG_FUNCTION_GRAPH not set:

 CONFIG_FUNCTION_PROFILER=y
 # CONFIG_FUNCTION_GRAPH is not set

This will force the function profiler to use the function tracer instead
of the function graph tracer.

  # cd /sys/kernel/debug/tracing
  # echo schedule > set_ftrace_filter
  # echo function > current_tracer
  # cat set_ftrace_filter
 schedule
  # cat trace
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 692/68108025   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
      kworker/0:2-909   [000] ....   531.235574: schedule <-worker_thread
           <idle>-0     [001] .N..   531.235575: schedule <-cpu_idle
      kworker/0:2-909   [000] ....   531.235597: schedule <-worker_thread
             sshd-2563  [001] ....   531.235647: schedule <-schedule_hrtimeout_range_clock

  # echo 1 > function_profile_enabled
  # echo 0 > function_porfile_enabled
  # cat set_ftrace_filter
 schedule
  # cat trace
 # tracer: function
 #
 # entries-in-buffer/entries-written: 159701/118821262   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
           <idle>-0     [002] ...1   604.870655: local_touch_nmi <-cpu_idle
           <idle>-0     [002] d..1   604.870655: enter_idle <-cpu_idle
           <idle>-0     [002] d..1   604.870656: atomic_notifier_call_chain <-enter_idle
           <idle>-0     [002] d..1   604.870656: __atomic_notifier_call_chain <-atomic_notifier_call_chain

The same problem could have happened with the trace_probe_ops,
but they are modified with the set_frace_filter file which does the
update at closure of the file.

The simple solution is to change ENABLE to UPDATE and call it every
time an ftrace_ops is unregistered.

Link: http://lkml.kernel.org/r/1323105776-26961-3-git-send-email-jolsa@redhat.com

Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-21 07:09:14 -05:00
Ingo Molnar
efc96737bd Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core 2011-11-11 08:19:37 +01:00
Steven Rostedt
d4d34b981a ftrace: Fix hash record accounting bug
If the set_ftrace_filter is cleared by writing just whitespace to
it, then the filter hash refcounts will be decremented but not
updated. This causes two bugs:

1) No functions will be enabled for tracing when they all should be

2) If the users clears the set_ftrace_filter twice, it will crash ftrace:

------------[ cut here ]------------
WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7()
Modules linked in:
Pid: 2330, comm: bash Not tainted 3.1.0-test+ 
Call Trace:
 [<ffffffff81051828>] warn_slowpath_common+0x83/0x9b
 [<ffffffff8105185a>] warn_slowpath_null+0x1a/0x1c
 [<ffffffff810ba362>] __ftrace_hash_rec_update.part.27+0x157/0x1a7
 [<ffffffff810ba6e8>] ? ftrace_regex_release+0xa7/0x10f
 [<ffffffff8111bdfe>] ? kfree+0xe5/0x115
 [<ffffffff810ba51e>] ftrace_hash_move+0x2e/0x151
 [<ffffffff810ba6fb>] ftrace_regex_release+0xba/0x10f
 [<ffffffff8112e49a>] fput+0xfd/0x1c2
 [<ffffffff8112b54c>] filp_close+0x6d/0x78
 [<ffffffff8113a92d>] sys_dup3+0x197/0x1c1
 [<ffffffff8113a9a6>] sys_dup2+0x4f/0x54
 [<ffffffff8150cac2>] system_call_fastpath+0x16/0x1b
---[ end trace 77a3a7ee73794a02 ]---

Link: http://lkml.kernel.org/r/20111101141420.GA4918@debian

Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-07 13:48:05 -05:00
Steven Rostedt
8ee3c92b7f ftrace: Remove force undef config value left for testing
A forced undef of a config value was used for testing and was
accidently left in during the final commit. This causes x86 to
run slower than needed while running function tracing as well
as causes the function graph selftest to fail when DYNMAIC_FTRACE
is not set. This is because the code in MCOUNT expects the ftrace
code to be processed with the config value set that happened to
be forced not set.

The forced config option was left in by:
    commit 6331c28c96
    ftrace: Fix dynamic selftest failure on some archs

Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian

Cc: stable@vger.kernel.org
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-07 11:02:33 -05:00
Paul Gortmaker
56d82e000c kernel: Add <linux/module.h> to files using it implicitly
These files are doing things like module_put and try_module_get
so they need to call out the module.h for explicit inclusion,
rather than getting it via <linux/device.h> which we ideally want
to remove the module.h inclusion from.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Steven Rostedt
e0a413f619 tracing: Warn on output if the function tracer was found corrupted
As the function tracer is very intrusive, lots of self checks are
performed on the tracer and if something is found to be strange
it will shut itself down keeping it from corrupting the rest of the
kernel. This shutdown may still allow functions to be traced, as the
tracing only stops new modifications from happening. Trying to stop
the function tracer itself can cause more harm as it requires code
modification.

Although a WARN_ON() is executed, a user may not notice it. To help
the user see that something isn't right with the tracing of the system
a big warning is added to the output of the tracer that lets the user
know that their data may be incomplete.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-11 09:13:25 -04:00
Ingo Molnar
40bcea7bbe Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2011-07-21 09:32:40 +02:00
Ingo Molnar
492f73a303 Merge branch 'perf/urgent' into perf/core
Merge reason: pick up the latest fixes - they won't make v3.0.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21 09:29:21 +02:00
Steven Rostedt
f7bc8b61f6 ftrace: Fix regression where ftrace breaks when modules are loaded
Enabling function tracer to trace all functions, then load a module and
then disable function tracing will cause ftrace to fail.

This can also happen by enabling function tracing on the command line:

  ftrace=function

and during boot up, modules are loaded, then you disable function tracing
with 'echo nop > current_tracer' you will trigger a bug in ftrace that
will shut itself down.

The reason is, the new ftrace code keeps ref counts of all ftrace_ops that
are registered for tracing. When one or more ftrace_ops are registered,
all the records that represent the functions that the ftrace_ops will
trace have a ref count incremented. If this ref count is not zero,
when the code modification runs, that function will be enabled for tracing.
If the ref count is zero, that function will be disabled from tracing.

To make sure the accounting was working, FTRACE_WARN_ON()s were added
to updating of the ref counts.

If the ref count hits its max (> 2^30 ftrace_ops added), or if
the ref count goes below zero, a FTRACE_WARN_ON() is triggered which
disables all modification of code.

Since it is common for ftrace_ops to trace all functions in the kernel,
instead of creating > 20,000 hash items for the ftrace_ops, the hash
count is just set to zero, and it represents that the ftrace_ops is
to trace all functions. This is where the issues arrise.

If you enable function tracing to trace all functions, and then add
a module, the modules function records do not get the ref count updated.
When the function tracer is disabled, all function records ref counts
are subtracted. Since the modules never had their ref counts incremented,
they go below zero and the FTRACE_WARN_ON() is triggered.

The solution to this is rather simple. When modules are loaded, and
their functions are added to the the ftrace pool, look to see if any
ftrace_ops are registered that trace all functions. And for those,
update the ref count for the module function records.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-14 23:02:27 -04:00
Steven Rostedt
6331c28c96 ftrace: Fix dynamic selftest failure on some archs
Archs that do not implement CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST, will
fail the dynamic ftrace selftest.

The function tracer has a quick 'off' variable that will prevent
the call back functions from being called. This variable is called
function_trace_stop. In x86, this is implemented directly in the mcount
assembly, but for other archs, an intermediate function is used called
ftrace_test_stop_func().

In dynamic ftrace, the function pointer variable ftrace_trace_function is
used to update the caller code in the mcount caller. But for archs that
do not have CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST set, it only calls
ftrace_test_stop_func() instead, which in turn calls __ftrace_trace_function.

When more than one ftrace_ops is registered, the function it calls is
ftrace_ops_list_func(), which will iterate over all registered ftrace_ops
and call the callbacks that have their hash matching.

The issue happens when two ftrace_ops are registered for different functions
and one is then unregistered. The __ftrace_trace_function is then pointed
to the remaining ftrace_ops callback function directly. This mean it will
be called for all functions that were registered to trace by both ftrace_ops
that were registered.

This is not an issue for archs with CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST,
because the update of ftrace_trace_function doesn't happen until after all
functions have been updated, and then the mcount caller is updated. But
for those archs that do use the ftrace_test_stop_func(), the update is
immediate.

The dynamic selftest fails because it hits this situation, and the
ftrace_ops that it registers fails to only trace what it was suppose to
and instead traces all other functions.

The solution is to delay the setting of __ftrace_trace_function until
after all the functions have been updated according to the registered
ftrace_ops. Also, function_trace_stop is set during the update to prevent
function tracing from calling code that is caused by the function tracer
itself.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-13 22:25:09 -04:00
Steven Rostedt
072126f452 ftrace: Update filter when tracing enabled in set_ftrace_filter()
Currently, if set_ftrace_filter() is called when the ftrace_ops is
active, the function filters will not be updated. They will only be updated
when tracing is disabled and re-enabled.

Update the functions immediately during set_ftrace_filter().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-13 22:10:05 -04:00
Steven Rostedt
41fb61c2d0 ftrace: Balance records when updating the hash
Whenever the hash of the ftrace_ops is updated, the record counts
must be balance. This requires disabling the records that are set
in the original hash, and then enabling the records that are set
in the updated hash.

Moving the update into ftrace_hash_move() removes the bug where the
hash was updated but the records were not, which results in ftrace
triggering a warning and disabling itself because the ftrace_ops filter
is updated while the ftrace_ops was registered, and then the failure
happens when the ftrace_ops is unregistered.

The current code will not trigger this bug, but new code will.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-13 22:00:50 -04:00
Steven Rostedt
4376cac667 ftrace: Do not disable interrupts for modules in mcount update
When I mounted an NFS directory, it caused several modules to be loaded. At the
time I was running the preemptirqsoff tracer, and it showed the following
output:

# tracer: preemptirqsoff
#
# preemptirqsoff latency trace v1.1.5 on 2.6.33.9-rt30-mrg-test
# --------------------------------------------------------------------
# latency: 1177 us, #4/4, CPU#3 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
#    -----------------
#    | task: modprobe-19370 (uid:0 nice:0 policy:0 rt_prio:0)
#    -----------------
#  => started at: ftrace_module_notify
#  => ended at:   ftrace_module_notify
#
#
#                  _------=> CPU#
#                 / _-----=> irqs-off
#                | / _----=> need-resched
#                || / _---=> hardirq/softirq
#                ||| / _--=> preempt-depth
#                |||| /_--=> lock-depth
#                |||||/     delay
#  cmd     pid   |||||| time  |   caller
#     \   /      ||||||   \   |   /
modprobe-19370   3d....    0us!: ftrace_process_locs <-ftrace_module_notify
modprobe-19370   3d.... 1176us : ftrace_process_locs <-ftrace_module_notify
modprobe-19370   3d.... 1178us : trace_hardirqs_on <-ftrace_module_notify
modprobe-19370   3d.... 1178us : <stack trace>
 => ftrace_process_locs
 => ftrace_module_notify
 => notifier_call_chain
 => __blocking_notifier_call_chain
 => blocking_notifier_call_chain
 => sys_init_module
 => system_call_fastpath

That's over 1ms that interrupts are disabled on a Real-Time kernel!

Looking at the cause (being the ftrace author helped), I found that the
interrupts are disabled before the code modification of mcounts into nops. The
interrupts only need to be disabled on start up around this code, not when
modules are being loaded.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-07 22:39:38 -04:00
Steven Rostedt
43dd61c9a0 ftrace: Fix regression of :mod:module function enabling
The new code that allows different utilities to pick and choose
what functions they trace broke the :mod: hook that allows users
to trace only functions of a particular module.

The reason is that the :mod: hook bypasses the hash that is setup
to allow individual users to trace their own functions and uses
the global hash directly. But if the global hash has not been
set up, it will cause a bug:

echo '*:mod:radeon' > /sys/kernel/debug/set_ftrace_filter

produces:

 [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
 [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip
 BUG: unable to handle kernel paging request at ffffffff8160ec90
 IP: [<ffffffff810d9136>] add_hash_entry+0x66/0xd0
 PGD 1a05067 PUD 1a09063 PMD 80000000016001e1
 Oops: 0003 [] SMP Jul  7 04:02:28 phyllis kernel: [55303.858604] CPU 1
 Modules linked in: cryptd aes_x86_64 aes_generic binfmt_misc rfcomm bnep ip6table_filter hid radeon r8169 ahci libahci mii ttm drm_kms_helper drm video i2c_algo_bit intel_agp intel_gtt

 Pid: 10344, comm: bash Tainted: G        WC  3.0.0-rc5  Dell Inc. Inspiron N5010/0YXXJJ
 RIP: 0010:[<ffffffff810d9136>]  [<ffffffff810d9136>] add_hash_entry+0x66/0xd0
 RSP: 0018:ffff88003a96bda8  EFLAGS: 00010246
 RAX: ffff8801301735c0 RBX: ffffffff8160ec80 RCX: 0000000000306ee0
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880137c92940
 RBP: ffff88003a96bdb8 R08: ffff880137c95680 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff81c9df78
 R13: ffff8801153d1000 R14: 0000000000000000 R15: 0000000000000000
 FS: 00007f329c18a700(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffffff8160ec90 CR3: 000000003002b000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process bash (pid: 10344, threadinfo ffff88003a96a000, task ffff88012fcfc470)
 Stack:
  0000000000000fd0 00000000000000fc ffff88003a96be38 ffffffff810d92f5
  ffff88011c4c4e00 ffff880000000000 000000000b69f4d0 ffffffff8160ec80
  ffff8800300e6f06 0000000081130295 0000000000000282 ffff8800300e6f00
 Call Trace:
  [<ffffffff810d92f5>] match_records+0x155/0x1b0
  [<ffffffff810d940c>] ftrace_mod_callback+0xbc/0x100
  [<ffffffff810dafdf>] ftrace_regex_write+0x16f/0x210
  [<ffffffff810db09f>] ftrace_filter_write+0xf/0x20
  [<ffffffff81166e48>] vfs_write+0xc8/0x190
  [<ffffffff81167001>] sys_write+0x51/0x90
  [<ffffffff815c7e02>] system_call_fastpath+0x16/0x1b
 Code: 48 8b 33 31 d2 48 85 f6 75 33 49 89 d4 4c 03 63 08 49 8b 14 24 48 85 d2 48 89 10 74 04 48 89 42 08 49 89 04 24 4c 89 60 08 31 d2
 RIP [<ffffffff810d9136>] add_hash_entry+0x66/0xd0
  RSP <ffff88003a96bda8>
 CR2: ffffffff8160ec90
 ---[ end trace a5d031828efdd88e ]---

Reported-by: Brian Marete <marete@toshnix.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-07 11:30:08 -04:00
Ingo Molnar
931da6137e Merge branch 'tip/perf/core-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2011-07-05 11:55:43 +02:00
Peter Huewe
22fe9b54d8 tracing: Convert to kstrtoul_from_user
This patch replaces the code for getting an unsigned long from a
userspace buffer by a simple call to kstroul_from_user.
This makes it easier to read and less error prone.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Link: http://lkml.kernel.org/r/1307476707-14762-1-git-send-email-peterhuewe@gmx.de
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 22:48:50 -04:00
Paul McQuade
bd38c0e6f9 ftrace: Fixed an include coding style issue
Removed <asm/ftrace.h> because <linux/ftrace.h> was already declared.
Braces of struct's coding style fixed.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul McQuade <tungstentide@gmail.com>
Link: http://lkml.kernel.org/r/4DE59711.3090900@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 22:48:45 -04:00
Steven Rostedt
a4f18ed11a ftrace: Revert 8ab2b7efd ftrace: Remove unnecessary disabling of irqs
Revert the commit that removed the disabling of interrupts around
the initial modifying of mcount callers to nops, and update the comment.

The original comment was outdated and stated that the interrupts were
being disabled to prevent kstop machine, which was required with the
old ftrace daemon, but was no longer the case.

What the comment failed to mention was that interrupts needed to be
disabled to keep interrupts from preempting the modifying of the code
and then executing the code that was partially modified.

Revert the commit and update the comment.

Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-07 14:49:19 -04:00
GuoWen Li
0aff1c0cef ftrace: Fix possible undefined return code
kernel/trace/ftrace.c: In function 'ftrace_regex_write.clone.15':
kernel/trace/ftrace.c:2743:6: warning: 'ret' may be used uninitialized in this
function

Signed-off-by: GuoWen Li <guowen.li.linux@gmail.com>
Link: http://lkml.kernel.org/r/201106011918.47939.guowen.li.linux@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-06 22:34:25 -04:00
Steven Rostedt
b1cff0ad10 ftrace: Add internal recursive checks
Witold reported a reboot caused by the selftests of the dynamic function
tracer. He sent me a config and I used ktest to do a config_bisect on it
(as my config did not cause the crash). It pointed out that the problem
config was CONFIG_PROVE_RCU.

What happened was that if multiple callbacks are attached to the
function tracer, we iterate a list of callbacks. Because the list is
managed by synchronize_sched() and preempt_disable, the access to the
pointers uses rcu_dereference_raw().

When PROVE_RCU is enabled, the rcu_dereference_raw() calls some
debugging functions, which happen to be traced. The tracing of the debug
function would then call rcu_dereference_raw() which would then call the
debug function and then... well you get the idea.

I first wrote two different patches to solve this bug.

1) add a __rcu_dereference_raw() that would not do any checks.
2) add notrace to the offending debug functions.

Both of these patches worked.

Talking with Paul McKenney on IRC, he suggested to add recursion
detection instead. This seemed to be a better solution, so I decided to
implement it. As the task_struct already has a trace_recursion to detect
recursion in the ring buffer, and that has a very small number it
allows, I decided to use that same variable to add flags that can detect
the recursion inside the infrastructure of the function tracer.

I plan to change it so that the task struct bit can be checked in
mcount, but as that requires changes to all archs, I will hold that off
to the next merge window.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1306348063.1465.116.camel@gandalf.stny.rr.com
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-25 22:13:49 -04:00
Steven Rostedt
3b6cfdb171 ftrace: Set ops->flag to enabled even on static function tracing
When dynamic ftrace is not configured, the ops->flags still needs
to have its FTRACE_OPS_FL_ENABLED bit set in ftrace_startup().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-25 22:13:42 -04:00
Steven Rostedt
a1cd617359 ftrace: Have ftrace_startup() return failure code
The register_ftrace_function() returns an error code on failure
except if the call to ftrace_startup() fails. Add a error return to
ftrace_startup() if it fails to start, allowing register_ftrace_funtion()
to return a proper error value.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-25 22:13:37 -04:00
Steven Rostedt
936e074b28 ftrace: Modify ftrace_set_filter/notrace to take ops
Since users of the function tracer can now pick and choose which
functions they want to trace agnostically from other users of the
function tracer, we need to pass the ops struct to the ftrace_set_filter()
functions.

The functions ftrace_set_global_filter() and ftrace_set_global_notrace()
is added to keep the old filter functions which are used to modify
the generic function tracers.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 19:22:52 -04:00
Steven Rostedt
cdbe61bfe7 ftrace: Allow dynamically allocated function tracers
Now that functions may be selected individually, it only makes sense
that we should allow dynamically allocated trace structures to
be traced. This will allow perf to allocate a ftrace_ops structure
at runtime and use it to pick and choose which functions that
structure will trace.

Note, a dynamically allocated ftrace_ops will always be called
indirectly instead of being called directly from the mcount in
entry.S. This is because there's no safe way to prevent mcount
from being preempted before calling the function, unless we
modify every entry.S to do so (not likely). Thus, dynamically allocated
functions will now be called by the ftrace_ops_list_func() that
loops through the ops that are allocated if there are more than
one op allocated at a time. This loop is protected with a
preempt_disable.

To determine if an ftrace_ops structure is allocated or not, a new
util function was added to the kernel/extable.c called
core_kernel_data(), which returns 1 if the address is between
_sdata and _edata.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:51 -04:00
Steven Rostedt
b848914ce3 ftrace: Implement separate user function filtering
ftrace_ops that are registered to trace functions can now be
agnostic to each other in respect to what functions they trace.
Each ops has their own hash of the functions they want to trace
and a hash to what they do not want to trace. A empty hash for
the functions they want to trace denotes all functions should
be traced that are not in the notrace hash.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:50 -04:00
Steven Rostedt
07fd5515f3 ftrace: Free hash with call_rcu_sched()
When a hash is modified and might be in use, we need to perform
a schedule RCU operation on it, as the hashes will soon be used
directly in the function tracer callback.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:50 -04:00
Steven Rostedt
2b499381bc ftrace: Have global_ops store the functions that are to be traced
This is a step towards each ops structure defining its own set
of functions to trace. As the current code with pid's and such
are specific to the global_ops, it is restructured to be used
with the global ops.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:49 -04:00
Steven Rostedt
bd69c30b1d ftrace: Add ops parameter to ftrace_startup/shutdown functions
In order to allow different ops to enable different functions,
the ftrace_startup() and ftrace_shutdown() functions need the
ops parameter passed to them.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:48 -04:00
Steven Rostedt
647bcd03d5 ftrace: Add enabled_functions file
Add the enabled_functions file that is used to show all the
functions that have been enabled for tracing as well as their
ref counts. This helps seeing if any function has been registered
and what functions are being traced.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:47 -04:00
Steven Rostedt
ed926f9b35 ftrace: Use counters to enable functions to trace
Every function has its own record that stores the instruction
pointer and flags for the function to be traced. There are only
two flags: enabled and free. The enabled flag states that tracing
for the function has been enabled (actively traced), and the free
flag states that the record no longer points to a function and can
be used by new functions (loaded modules).

These flags are now moved to the MSB of the flags (actually just
the top 32bits). The rest of the bits (30 bits) are now used as
a ref counter. Everytime a tracer register functions to trace,
those functions will have its counter incremented.

When tracing is enabled, to determine if a function should be traced,
the counter is examined, and if it is non-zero it is set to trace.

When a ftrace_ops is registered to trace functions, its hashes
are examined. If the ftrace_ops filter_hash count is zero, then
all functions are set to be traced, otherwise only the functions
in the hash are to be traced. The exception to this is if a function
is also in the ftrace_ops notrace_hash. Then that function's counter
is not incremented for this ftrace_ops.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:47 -04:00
Steven Rostedt
33dc9b1267 ftrace: Separate hash allocation and assignment
When filtering, allocate a hash to insert the function records.
After the filtering is complete, assign it to the ftrace_ops structure.

This allows the ftrace_ops structure to have a much smaller array of
hash buckets instead of wasting a lot of memory.

A read only empty_hash is created to be the minimum size that any ftrace_ops
can point to.

When a new hash is created, it has the following steps:

o Allocate a default hash.
o Walk the function records assigning the filtered records to the hash
o Allocate a new hash with the appropriate size buckets
o Move the entries from the default hash to the new hash.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:46 -04:00
Steven Rostedt
f45948e898 ftrace: Create a global_ops to hold the filter and notrace hashes
Combine the filter and notrace hashes to be accessed by a single entity,
the global_ops. The global_ops is a ftrace_ops structure that is passed
to different functions that can read or modify the filtering of the
function tracer.

The ftrace_ops structure was modified to hold a filter and notrace
hashes so that later patches may allow each ftrace_ops to have its own
set of rules to what functions may be filtered.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:45 -04:00
Steven Rostedt
1cf41dd799 ftrace: Use hash instead for FTRACE_FL_FILTER
When multiple users are allowed to have their own set of functions
to trace, having the FTRACE_FL_FILTER flag will not be enough to
handle the accounting of those users. Each user will need their own
set of functions.

Replace the FTRACE_FL_FILTER with a filter_hash instead. This is
temporary until the rest of the function filtering accounting
gets in.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:44 -04:00
Steven Rostedt
b448c4e3ae ftrace: Replace FTRACE_FL_NOTRACE flag with a hash of ignored functions
To prepare for the accounting system that will allow multiple users of
the function tracer, having the FTRACE_FL_NOTRACE as a flag in the
dyn_trace record does not make sense.

All ftrace_ops will soon have a hash of functions they should trace
and not trace. By making a global hash of functions not to trace makes
this easier for the transition.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:44 -04:00
Ingo Molnar
ac0a3260f3 Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2011-05-01 19:11:42 +02:00
Steven Rostedt
b9df92d2a9 ftrace: Consolidate the function match routines for normal and mods
The code used for matching functions is almost identical between normal
selecting of functions and using the :mod: feature of set_ftrace_notrace.

Consolidate the two users into one function.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29 22:53:14 -04:00
Steven Rostedt
491d0dcfb9 ftrace: Consolidate updating of ftrace_trace_function
There are three locations that perform almost identical functions in order
to update the ftrace_trace_function (the ftrace function variable that gets
called by mcount).

Consolidate these into a single function called update_ftrace_function().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29 22:53:11 -04:00
Steven Rostedt
996e87be7f ftrace: Move record update for normal and modules into a separate function
The updating of a function record is moved to a single function. This will allow
us to add specific changes in one location for both modules and kernel
functions.

Later patches will determine if the function record itself needs to be updated
(which enables the mcount caller), or just the ftrace_ops needs the update.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29 22:53:08 -04:00
Steven Rostedt
d2c8c3eafb ftrace: Remove FTRACE_FL_CONVERTED flag
Since we disable all function tracer processing if we detect
that a modification of a instruction had failed, we do not need
to track that the record has failed. No more ftrace processing
is allowed, and the FTRACE_FL_CONVERTED flag is pointless.

The FTRACE_FL_CONVERTED flag was used to denote records that were
successfully converted from mcount calls into nops. But if a single
record fails, all of ftrace is disabled.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29 22:53:04 -04:00
Steven Rostedt
45a4a2372b ftrace: Remove FTRACE_FL_FAILED flag
Since we disable all function tracer processing if we detect
that a modification of a instruction had failed, we do not need
to track that the record has failed. No more ftrace processing
is allowed, and the FTRACE_FL_FAILED flag is pointless.

Removing this flag simplifies some of the code, but some ftrace_disabled
checks needed to be added or move around a little.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29 22:53:01 -04:00
Steven Rostedt
3499e46114 ftrace: Remove failures file
The failures file in the debugfs tracing directory would list the
functions that failed to convert when the old dead ftrace daemon
tried to update code but failed. Since this code is now dead along
with the daemon the failures file is useless. Remove it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29 22:52:58 -04:00
Steven Rostedt
8ab2b7efd3 ftrace: Remove unnecessary disabling of irqs
The disabling of interrupts around ftrace_update_code() was used
to protect against the evil ftrace daemon from years past. But that
daemon has long been killed. It is safe to keep interrupts enabled
while updating the initial mcount into nops.

The ftrace_mutex is also held which keeps other users at bay.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29 22:52:55 -04:00
Steven Rostedt
0778d9ad33 ftrace: Make FTRACE_WARN_ON() work in if condition
Let FTRACE_WARN_ON() be used as a stand alone statement or
inside a conditional: if (FTRACE_WARN_ON(x))

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29 22:52:52 -04:00
Steven Rostedt
058e297d34 ftrace: Only update the function code on write to filter files
If function tracing is enabled, a read of the filter files will
cause the call to stop_machine to update the function trace sites.
It should only call stop_machine on write.

Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-29 22:42:59 -04:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Jiri Olsa
1106b6997d tracing: Fix set_ftrace_filter probe function display
If one or more function probes (like traceon) are enabled,
and there's no other function filter, the first probe
func is skipped (which one depends on the position in the hash).

$ echo sys_open:traceon sys_close:traceon > ./set_ftrace_filter
$ cat set_ftrace_filter
#### all functions enabled ####
sys_close:traceon:unlimited
$

The reason was, that in the case of no other function filter,
the func_pos was not properly updated before calling t_hash_start.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1297874134-7008-1-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-22 12:52:03 -04:00
Steven Rostedt
868baf07b1 ftrace: Fix memory leak with function graph and cpu hotplug
When the fuction graph tracer starts, it needs to make a special
stack for each task to save the real return values of the tasks.
All running tasks have this stack created, as well as any new
tasks.

On CPU hot plug, the new idle task will allocate a stack as well
when init_idle() is called. The problem is that cpu hotplug does
not create a new idle_task. Instead it uses the idle task that
existed when the cpu went down.

ftrace_graph_init_task() will add a new ret_stack to the task
that is given to it. Because a clone will make the task
have a stack of its parent it does not check if the task's
ret_stack is already NULL or not. When the CPU hotplug code
starts a CPU up again, it will allocate a new stack even
though one already existed for it.

The solution is to treat the idle_task specially. In fact, the
function_graph code already does, just not at init_idle().
Instead of using the ftrace_graph_init_task() for the idle task,
which that function expects the task to be a clone, have a
separate ftrace_graph_init_idle_task(). Also, we will create a
per_cpu ret_stack that is used by the idle task. When we call
ftrace_graph_init_idle_task() it will check if the idle task's
ret_stack is NULL, if it is, then it will assign it the per_cpu
ret_stack.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-02-11 16:23:33 -05:00
Linus Torvalds
092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
matt mooney
907f278409 tracing/trivial: Remove cast from void*
Unnecessary cast from void* in assignment.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18 10:53:22 -04:00
Arnd Bergmann
6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Ingo Molnar
3aabae7d9d Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2010-09-15 10:27:31 +02:00
Steven Rostedt
79e406d7b0 tracing: Remove leftover FTRACE_ENABLE/DISABLE_MCOUNT enums
The enums for FTRACE_ENABLE_MCOUNT and FTRACE_DISABLE_MCOUNT were
used as commands to ftrace_run_update_code(). But these commands
were used by the old nasty ftrace daemon that has long been slain.

This is a clean up patch to remove the references to these enums
and simplify the code a little.

Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 22:19:46 -04:00
Steven Rostedt
57c072c711 tracing: Fix reading of set_ftrace_filter across lists
If we do:

 # cd /sys/kernel/debug
 # echo 'do_IRQ:traceon schedule:traceon sys_write:traceon' > \
    set_ftrace_filter
 # cat set_ftrace_filter

We get the following output:

 #### all functions enabled ####
 sys_write:traceon:unlimited
 schedule:traceon:unlimited
 do_IRQ:traceon:unlimited

This outputs two lists. One is the fact that all functions are
currently enabled for function tracing, the other has three probed
functions, which happen to have 'traceon' as their commands.

Currently, when reading the first list (functions enabled) the
seq_file code will receive a "NULL" from the t_next() function
causing it to exit early. This makes "read()" from userspace stop
reading the code at this boarder. Although read is allowed to do this,
some (broken) applications might consider this an end of file and
stop early.

This patch adds the start of the second list to t_next() when it
finishes the first list. It is a simple change and gives the
set_ftrace_filter file nicer reading ability.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 15:14:20 -04:00
Steven Rostedt
98c4fd046f tracing: Keep track of set_ftrace_filter position and allow lseek again
This patch keeps track of the index within the elements of
set_ftrace_filter and if the position goes backwards, it nicely
resets and starts from the beginning again.

This allows for lseek and pread to work properly now.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 14:46:01 -04:00
Steven Rostedt
4aeb69672d tracing: Replace typecasted void pointer in set_ftrace_filter code
The set_ftrace_filter uses seq_file and reads from two lists. The
pointer returned by t_next() can either be of type struct dyn_ftrace
or struct ftrace_func_probe. If there is a bug (there was one)
the wrong pointer may be used and the reference can cause an oops.

This patch makes t_next() and friends only return the iterator structure
which now has a pointer of type struct dyn_ftrace and struct
ftrace_func_probe. The t_show() can now test if the pointer is NULL or
not and if the pointer exists, it is guaranteed to be of the correct type.

Now if there's a bug, only wrong data will be shown but not an oops.

Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 11:42:30 -04:00
Steven Rostedt
2bccfffd15 tracing: Do not reset *pos in set_ftrace_filter
After the filtered functions are read, the probed functions are read
from the hash in set_ftrace_filter. When the hashed probed functions
are read, the *pos passed in is reset. Instead of modifying the pos
given to the read function, just record the pos where the filtered
functions ended and subtract from that.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 11:42:29 -04:00
Chris Wright
df09162550 tracing: t_start: reset FTRACE_ITER_HASH in case of seek/pread
Be sure to avoid entering t_show() with FTRACE_ITER_HASH set without
having properly started the iterator to iterate the hash.  This case is
degenerate and, as discovered by Robert Swiecki, can cause t_hash_show()
to misuse a pointer.  This causes a NULL ptr deref with possible security
implications.  Tracked as CVE-2010-3079.

Cc: Robert Swiecki <swiecki@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-09 22:43:49 -04:00
Steven Rostedt
9c55cb12c1 tracing: Do not allow llseek to set_ftrace_filter
Reading the file set_ftrace_filter does three things.

1) shows whether or not filters are set for the function tracer
2) shows what functions are set for the function tracer
3) shows what triggers are set on any functions

3 is independent from 1 and 2.

The way this file currently works is that it is a state machine,
and as you read it, it may change state. But this assumption breaks
when you use lseek() on the file. The state machine gets out of sync
and the t_show() may use the wrong pointer and cause a kernel oops.

Luckily, this will only kill the app that does the lseek, but the app
dies while holding a mutex. This prevents anyone else from using the
set_ftrace_filter file (or any other function tracing file for that matter).

A real fix for this is to rewrite the code, but that is too much for
a -rc release or stable. This patch simply disables llseek on the
set_ftrace_filter() file for now, and we can do the proper fix for the
next major release.

Reported-by: Robert Swiecki <swiecki@google.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: vendor-sec@lst.de
Cc: <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-08 12:08:01 -04:00
Li Zefan
3aaba20f26 tracing: Fix a race in function profile
While we are reading trace_stat/functionX and someone just
disabled function_profile at that time, we can trigger this:

	divide error: 0000 [] PREEMPT SMP
	...
	EIP is at function_stat_show+0x90/0x230
	...

This fix just takes the ftrace_profile_lock and checks if
rec->counter is 0. If it's 0, we know the profile buffer
has been reset.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: stable@kernel.org
LKML-Reference: <4C723644.4040708@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-08-31 16:46:23 -04:00
Steven Rostedt
5168ae50a6 tracing: Remove ftrace_preempt_disable/enable
The ftrace_preempt_disable/enable functions were to address a
recursive race caused by the function tracer. The function tracer
traces all functions which makes it easily susceptible to recursion.
One area was preempt_enable(). This would call the scheduler and
the schedulre would call the function tracer and loop.
(So was it thought).

The ftrace_preempt_disable/enable was made to protect against recursion
inside the scheduler by storing the NEED_RESCHED flag. If it was
set before the ftrace_preempt_disable() it would not call schedule
on ftrace_preempt_enable(), thinking that if it was set before then
it would have already scheduled unless it was already in the scheduler.

This worked fine except in the case of SMP, where another task would set
the NEED_RESCHED flag for a task on another CPU, and then kick off an
IPI to trigger it. This could cause the NEED_RESCHED to be saved at
ftrace_preempt_disable() but the IPI to arrive in the the preempt
disabled section. The ftrace_preempt_enable() would not call the scheduler
because the flag was already set before entring the section.

This bug would cause a missed preemption check and cause lower latencies.

Investigating further, I found that the recusion caused by the function
tracer was not due to schedule(), but due to preempt_schedule(). Now
that preempt_schedule is completely annotated with notrace, the recusion
no longer is an issue.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 19:32:38 -04:00
Steven Rostedt
38516ab59f tracing: Let tracepoints have data passed to tracepoint callbacks
This patch adds data to be passed to tracepoint callbacks.

The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:

DECLARE_TRACE(mytracepoint, int value, value)

Will create the register function:

int register_trace_mytracepoint((void(*)(void *data, int value))probe,
                                void *data);

As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:

void myprobe(void *data, int value)
{
}

The callback may choose to ignore the data parameter.

This change allows callbacks to register a private data pointer along
with the function probe.

	void mycallback(void *data, int value);

	register_trace_mytracepoint(mycallback, mydata);

Then the mycallback() will receive the "mydata" as the first parameter
before the args.

A more detailed example:

  DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  /* In the C file */

  DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));

  [...]

       trace_mytracepoint(status);

  /* In a file registering this tracepoint */

  int my_callback(void *data, int status)
  {
	struct my_struct my_data = data;
	[...]
  }

  [...]
	my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
	init_my_data(my_data);
	register_trace_mytracepoint(my_callback, my_data);

The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:

	unregister_trace_mytracepoint(my_callback, my_data);

Because of the data parameter, tracepoints declared this way can not have
no args. That is:

  DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());

will cause an error.

If no arguments are needed, a new macro can be used instead:

  DECLARE_TRACE_NOARGS(mytracepoint);

Since there are no arguments, the proto and args fields are left out.

This is part of a series to make the tracepoint footprint smaller:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint

Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.

 v5: Fixed net/core/drop_monitor.c to handle these updates.

 v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
     #ifdef CONFIG_TRACE_POINTS, since the two are the same in both
     cases. The __DECLARE_TRACE() is what changes.
     Thanks to Frederic Weisbecker for pointing this out.

 v3: Made all register_* functions require data to be passed and
     all callbacks to take a void * parameter as its first argument.
     This makes the calling functions comply with C standards.

     Also added more comments to the modifications of DECLARE_TRACE().

 v2: Made the DECLARE_TRACE() have the ability to pass arguments
     and added a new DECLARE_TRACE_NOARGS() for tracepoints that
     do not need any arguments.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 09:50:34 -04:00
Steven Rostedt
23e117fa44 Merge branch 'sched/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into trace/tip/tracing/core-4 2010-05-14 09:29:52 -04:00
Peter Zijlstra
27a9da6538 sched: Remove rq argument to the tracepoints
struct rq isn't visible outside of sched.o so its near useless to
expose the pointer, also there are no users of it, so remove it.

Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272997616.1642.207.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-07 11:28:17 +02:00
Steven Rostedt
37e44bc50d tracing: Fix sleep time function profiling
When sleep_time is off the function profiler ignores the time that a task
is scheduled out. When the task is scheduled out a timestamp is taken.
When the task is scheduled back in, the timestamp is compared to the
current time and the saved calltimes are adjusted accordingly.

But when stopping the function profiler, the sched switch hook that
does this adjustment was stopped before shutting down the tracer.
This allowed some tasks to not get their timestamps set when they
scheduled out. When the function profiler started again, this would
skew the times of the scheduler functions.

This patch moves the stopping of the sched switch to after the function
profiler is stopped. It also ignores zero set calltimes, which may
happen on start up.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-27 21:04:24 -04:00
Chase Douglas
e330b3bcd8 tracing: Show sample std dev in function profiling
When combined with function graph tracing the ftrace function profiler
also prints the average run time of functions. While this gives us some
good information, it doesn't tell us anything about the variance of the
run times of the function. This change prints out the s^2 sample
standard deviation alongside the average.

This change adds one entry to the profile record structure. This
increases the memory footprint of the function profiler by 1/3 on a
32-bit system, and by 1/5 on a 64-bit system when function graphing is
enabled, though the memory is only allocated when the profiler is turned
on. During the profiling, one extra line of code adds the squared
calltime to the new record entry, so this should not adversly affect
performance.

Note that the square of the sample standard deviation is printed because
there is no sqrt implementation for unsigned long long in the kernel.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
LKML-Reference: <1272304925-2436-1-git-send-email-chase.douglas@canonical.com>

[ fixed comment about ns^2 -> us^2 conversion ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-27 18:23:15 -04:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from  to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Linus Torvalds
4e3eaddd14 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking: Make sparse work with inline spinlocks and rwlocks
  x86/mce: Fix RCU lockdep splats
  rcu: Increase RCU CPU stall timeouts if PROVE_RCU
  ftrace: Replace read_barrier_depends() with rcu_dereference_raw()
  rcu: Suppress RCU lockdep warnings during early boot
  rcu, ftrace: Fix RCU lockdep splat in ftrace_perf_buf_prepare()
  rcu: Suppress __mpol_dup() false positive from RCU lockdep
  rcu: Make rcu_read_lock_sched_held() handle !PREEMPT
  rcu: Add control variables to lockdep_rcu_dereference() diagnostics
  rcu, cgroup: Relax the check in task_subsys_state() as early boot is now handled by lockdep-RCU
  rcu: Use wrapper function instead of exporting tasklist_lock
  sched, rcu: Fix rcu_dereference() for RCU-lockdep
  rcu: Make task_subsys_state() RCU-lockdep checks handle boot-time use
  rcu: Fix holdoff for accelerated GPs for last non-dynticked CPU
  x86/gart: Unexport gart_iommu_aperture

Fix trivial conflicts in kernel/trace/ftrace.c
2010-03-13 14:43:01 -08:00
Steven Rostedt
ea14eb7140 function-graph: Init curr_ret_stack with ret_stack
If the graph tracer is active, and a task is forked but the allocating of
the processes graph stack fails, it can cause crash later on.

This is due to the temporary stack being NULL, but the curr_ret_stack
variable is copied from the parent. If it is not -1, then in
ftrace_graph_probe_sched_switch() the following:

	for (index = next->curr_ret_stack; index >= 0; index--)
		next->ret_stack[index].calltime += timestamp;

Will cause a kernel OOPS.

Found with Li Zefan's ftrace_stress_test.

Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-12 20:28:02 -05:00
Ingo Molnar
915a0b575f Merge branch 'tip/tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent 2010-03-11 13:39:33 +01:00
Paul E. McKenney
3f379b03fb ftrace: Replace read_barrier_depends() with rcu_dereference_raw()
Replace the calls to read_barrier_depends() in
ftrace_list_func() with rcu_dereference_raw() to improve
readability.  The reason that we use rcu_dereference_raw() here
is that removed entries are never freed, instead they are simply
leaked.  This is one of a very few cases where use of
rcu_dereference_raw() is the long-term right answer.  And I
don't yet know of any others.  ;-)

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267830207-9474-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 13:38:01 +01:00
Steven Rostedt
801c29fd1f function-graph: Fix unused reference to ftrace_set_func()
The declaration of ftrace_set_func() is at the start of the ftrace.c file
and wrapped with a #ifdef CONFIG_FUNCTION_GRAPH condition. If function
graph tracing is enabled but CONFIG_DYNAMIC_FTRACE is not, a warning
about that function being declared static and unused is given.

This really should have been placed within the CONFIG_FUNCTION_GRAPH
condition that uses ftrace_set_func().

Moving the declaration down fixes the warning and makes the code cleaner.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-05 21:00:30 -05:00
Linus Torvalds
6556a67435 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (172 commits)
  perf_event, amd: Fix spinlock initialization
  perf_event: Fix preempt warning in perf_clock()
  perf tools: Flush maps on COMM events
  perf_events, x86: Split PMU definitions into separate files
  perf annotate: Handle samples not at objdump output addr boundaries
  perf_events, x86: Remove superflous MSR writes
  perf_events: Simplify code by removing cpu argument to hw_perf_group_sched_in()
  perf_events, x86: AMD event scheduling
  perf_events: Add new start/stop PMU callbacks
  perf_events: Report the MMAP pgoff value in bytes
  perf annotate: Defer allocating sym_priv->hist array
  perf symbols: Improve debugging information about symtab origins
  perf top: Use a macro instead of a constant variable
  perf symbols: Check the right return variable
  perf/scripts: Tag syscall_name helper as not yet available
  perf/scripts: Add perf-trace-python Documentation
  perf/scripts: Remove unnecessary PyTuple resizes
  perf/scripts: Add syscall tracing scripts
  perf/scripts: Add Python scripting engine
  perf/scripts: Remove check-perf-trace from listed scripts
  ...

Fix trivial conflict in tools/perf/util/probe-event.c
2010-02-28 10:20:25 -08:00
Ingo Molnar
64b9fb5704 Merge commit 'v2.6.33' into tracing/core
Conflicts:
	scripts/recordmcount.pl

Merge reason: Merge up to v2.6.33.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 09:18:32 +01:00
Li Zefan
c7c6b1fe9f ftrace: Allow to remove a single function from function graph filter
I don't see why we can only clear all functions from the filter.

After patching:

  # echo sys_open > set_graph_function
  # echo sys_close >> set_graph_function
  # cat set_graph_function
  sys_open
  sys_close
  # echo '!sys_close' >> set_graph_function
  # cat set_graph_function
  sys_open

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B726388.2000408@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-02-11 14:32:38 -05:00
Masami Hiramatsu
f24bb999d2 ftrace: Remove record freezing
Remove record freezing. Because kprobes never puts probe on
ftrace's mcount call anymore, it doesn't need ftrace to check
whether kprobes on it.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: przemyslaw@pawelczyk.it
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100202214925.4694.73469.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04 09:36:19 +01:00
Masami Hiramatsu
2cfa19780d ftrace/alternatives: Introducing *_text_reserved functions
Introducing *_text_reserved functions for checking the text
address range is partially reserved or not. This patch provides
checking routines for x86 smp alternatives and dynamic ftrace.
Since both functions modify fixed pieces of kernel text, they
should reserve and protect those from other dynamic text
modifier, like kprobes.

This will also be extended when introducing other subsystems
which modify fixed pieces of kernel text. Dynamic text modifiers
should avoid those.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: przemyslaw@pawelczyk.it
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <20100202214911.4694.16587.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04 09:36:19 +01:00
Li Zefan
751e9983ee ftrace: Fix MATCH_END_ONLY function filter
For '*foo' pattern, we should allow any string ending with
'foo', but ftrace filter incorrectly disallows strings
like bar_foo_foo:

  # echo '*io' > set_ftrace_filter
  # cat set_ftrace_filter | grep 'req_bio_endio'
  # cat available_filter_functions | grep 'req_bio_endio'
  req_bio_endio

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E870E.6060607@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-14 22:38:03 -05:00
Li Zefan
91baf6285b function-graph: Allow writing the same val to set_graph_function
# echo 'do_open' > set_graph_function
 # echo 'do_open' >> set_graph_function
 bash: echo: write error: Invalid argument

Make it valid to write the same value to set_graph_function,
which is consistent with set_ftrace_filter interface.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-reference: <4B1DC4E1.1060303@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13 18:37:26 +01:00
Li Zefan
313254a940 ftrace: Call trace_parser_clear() properly
I found a weird behavior:

  # echo 'fuse:*' > set_ftrace_filter
  bash: echo: write error: Invalid argument
  # cat set_ftrace_filter
  fuse_dev_fasync
  fuse_dev_poll
  fuse_copy_do

We should call trace_parser_clear() no matter ftrace_process_regex()
returns 0 or -errno, otherwise we will actually take the unaccepted
records from ftrace_regex_release().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B1DC4D2.3000406@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13 18:37:26 +01:00
Li Zefan
311d16da57 ftrace: Return EINVAL when writing invalid val to set_ftrace_filter
Currently it doesn't warn user on invald value:

 # echo nonexist_symbol > set_ftrace_filter
or:
 # echo 'nonexist_symbol:mod:fuse' > set_ftrace_filter

Better make it return failure.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B1DC4BF.2070003@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13 18:37:25 +01:00
Linus Torvalds
96fa2b508d Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (40 commits)
  tracing: Separate raw syscall from syscall tracer
  ring-buffer-benchmark: Add parameters to set produce/consumer priorities
  tracing, function tracer: Clean up strstrip() usage
  ring-buffer benchmark: Run producer/consumer threads at nice +19
  tracing: Remove the stale include/trace/power.h
  tracing: Only print objcopy version warning once from recordmcount
  tracing: Prevent build warning: 'ftrace_graph_buf' defined but not used
  ring-buffer: Move access to commit_page up into function used
  tracing: do not disable interrupts for trace_clock_local
  ring-buffer: Add multiple iterations between benchmark timestamps
  kprobes: Sanitize struct kretprobe_instance allocations
  tracing: Fix to use __always_unused attribute
  compiler: Introduce __always_unused
  tracing: Exit with error if a weak function is used in recordmcount.pl
  tracing: Move conditional into update_funcs() in recordmcount.pl
  tracing: Add regex for weak functions in recordmcount.pl
  tracing: Move mcount section search to front of loop in recordmcount.pl
  tracing: Fix objcopy revision check in recordmcount.pl
  tracing: Check absolute path of input file in recordmcount.pl
  tracing: Correct the check for number of arguments in recordmcount.pl
  ...
2009-12-05 09:53:36 -08:00
Ingo Molnar
457dc928f5 tracing, function tracer: Clean up strstrip() usage
Clean up strstrip() usage - which also addresses this build warning:

  kernel/trace/ftrace.c: In function 'ftrace_pid_write':
  kernel/trace/ftrace.c:3004: warning: ignoring return value of 'strstrip', declared with attribute warn_unused_result

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23 11:04:07 +01:00
Lai Jiangshan
f6060f4681 tracing: Prevent build warning: 'ftrace_graph_buf' defined but not used
Prevent build warning when CONFIG_FUNCTION_GRAPH_TRACER is not set.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4AF24381.5060307@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-11-17 11:05:49 -05:00
Li Zefan
ed146b2594 ftrace: Fix unmatched locking in ftrace_regex_write()
When a command is passed to the set_ftrace_filter, then
the ftrace_regex_lock is still held going back to user space.

 # echo 'do_open : foo' > set_ftrace_filter
 (still holding ftrace_regex_lock when returning to user space!)

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AEF7F8A.3080300@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-11-04 01:42:10 -05:00
Ingo Molnar
9de09ace8d Merge branch 'tracing/urgent' into tracing/core
Merge reason: Pick up fixes and move base from -rc1 to -rc5.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-29 09:02:20 +01:00
Jiri Olsa
cf8517cf90 tracing: Update *ppos instead of filp->f_pos
Instead of directly updating filp->f_pos we should update the *ppos
argument. The filp->f_pos gets updated within the file_pos_write()
function called from sys_write().

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091023233646.399670810@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-24 11:07:49 +02:00
Frederic Weisbecker
06f43d66ec ftrace: Copy ftrace_graph_filter boot param using strlcpy
We are using strncpy in the wrong way to copy the ftrace_graph_filter
boot param because we pass the buffer size instead of the max string
size it can contain (buffer size - 1). The end result might not be
NULL terminated as we are abusing the max string size.

Lets use strlcpy() instead.

Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2009-10-14 20:43:39 +02:00
Jiri Olsa
5cb084bb1f tracing: Enable records during the module load
I was debuging some module using "function" and "function_graph"
tracers and noticed, that if you load module after you enabled
tracing, the module's hooks will convert only to NOP instructions.

The attached patch enables modules' hooks if there's function trace
allready on, thus allowing to trace module functions.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20091013203425.896285120@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14 08:13:54 +02:00
jolsa@redhat.com
756d17ee7e tracing: Support multiple pids in set_pid_ftrace file
Adding the possibility to set more than 1 pid in the set_pid_ftrace
file, thus allowing to trace more than 1 independent processes.

Usage:

 sh-4.0# echo 284 > ./set_ftrace_pid
 sh-4.0# cat ./set_ftrace_pid
 284
 sh-4.0# echo 1 >> ./set_ftrace_pid
 sh-4.0# echo 0 >> ./set_ftrace_pid
 sh-4.0# cat ./set_ftrace_pid
 swapper tasks
 1
 284
 sh-4.0# echo 4 > ./set_ftrace_pid
 sh-4.0# cat ./set_ftrace_pid
 4
 sh-4.0# echo > ./set_ftrace_pid
 sh-4.0# cat ./set_ftrace_pid
 no pid
 sh-4.0#

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091013203425.565454612@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14 08:13:53 +02:00
Ingo Molnar
1bac0497ef Merge branch 'tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/core 2009-10-13 12:03:08 +02:00
Ingo Molnar
2c96c142e9 Merge branch 'tracing/urgent' into tracing/core
Merge reason: Pick up tracing/filters fix from the urgent queue,
              we will queue up dependent patches.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-13 09:24:59 +02:00
Stefan Assmann
369bc18f9a ftrace: add kernel command line graph function filtering
Add a command line parameter to allow limiting the function graphs
that are traced on boot up from the given top-level callers , when
ftrace=function_graph is specified.

This patch adds the following command line option:
ftrace_graph_filter=function-list

Where function-list is a comma separated list of functions to filter.

[fweisbec@gmail.com: picked the documentation changes from the v2 patch]

Signed-off-by: Stefan Assmann <sassmann@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4AD2DEB9.2@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-12 22:17:21 +02:00
Linus Torvalds
f17f36bb1c Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: user local buffer variable for trace branch tracer
  tracing: fix warning on kernel/trace/trace_branch.c andtrace_hw_branches.c
  ftrace: check for failure for all conversions
  tracing: correct module boundaries for ftrace_release
  tracing: fix transposed numbers of lock_depth and preempt_count
  trace: Fix missing assignment in trace_ctxwake_*
  tracing: Use free_percpu instead of kfree
  tracing: Check total refcount before releasing bufs in profile_enable failure
2009-10-08 12:06:09 -07:00
Steven Rostedt
3279ba37db ftrace: check for failure for all conversions
Due to legacy code from back when the dynamic tracer used a daemon,
only core kernel code was checking for failures. This is no longer
the case. We must check for failures any time we perform text modifications.

Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-10-07 17:22:24 -04:00
jolsa@redhat.com
e7247a15ff tracing: correct module boundaries for ftrace_release
When the module is about the unload we release its call records.
The ftrace_release function was given wrong values representing
the module core boundaries, thus not releasing its call records.

Plus making ftrace_release function module specific.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1254934835-363-3-git-send-email-jolsa@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-10-07 15:52:09 -04:00
Ingo Molnar
0aa73ba1c4 Merge branch 'tracing/urgent' into tracing/core
Merge reason: Pick up latest fixes and update to latest upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-01 11:20:48 +02:00
Matt Fleming
33974093c0 tracing: Fix infinite recursion in ftrace_update_pid_func()
When CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST is enabled
__ftrace_trace_function contains the current trace function, not
ftrace_trace_function.

In ftrace_update_pid_func() we currently incorrectly assign the
value of ftrace_trace_function to __ftrace_trace_funcion before
returning.

Without this patch it is possible to execute an infinite recursion
whereby ftrace_test_stop_func() calls __ftrace_trace_function,
which was assigned ftrace_test_stop_func() in
ftrace_update_pid_func().

Signed-off-by: Matt Fleming <matthew.fleming@imgtec.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1254152581-18347-1-git-send-email-matt@console-pimps.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-01 08:19:24 +02:00
Linus Torvalds
4187e7e9f1 Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  modules, tracing: Remove stale struct marker signature from module_layout()
  tracing/workqueue: Use %pf in workqueue trace events
  tracing: Fix a comment and a trivial format issue in tracepoint.h
  tracing: Fix failure path in ftrace_regex_open()
  tracing: Fix failure path in ftrace_graph_write()
  tracing: Check the return value of trace_get_user()
  tracing: Fix off-by-one in trace_get_user()
2009-09-26 10:13:54 -07:00
Frederic Weisbecker
3f6fe06dbf tracing/filters: Unify the regex parsing helpers
The filter code has stolen the regex parsing function from ftrace to
get the regex support.
We have duplicated this code, so factorize it in the filter area and
make it generally available, as the filter code is the most suited to
host this feature.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
2009-09-24 21:40:13 +02:00
Alexey Dobriyan
8d65af789f sysctl: remove "struct file *" argument of ->proc_handler
It's unused.

It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.

It _was_ used in two places at arch/frv for some reason.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:04 -07:00
James Morris
88e9d34c72 seq_file: constify seq_operations
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:29 -07:00
Li Zefan
79fe249c83 tracing: Fix failure path in ftrace_regex_open()
Don't forget to free trace_parser if seq_open() returned failure.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4AB86694.4040803@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22 10:28:57 +02:00
Li Zefan
1eb90f138b tracing: Fix failure path in ftrace_graph_write()
Don't call trace_parser_put() on uninitialized trace_parser.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4AB86639.3000003@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22 10:28:56 +02:00
Li Zefan
4ba7978e98 tracing: Check the return value of trace_get_user()
Return immediately if trace_get_user() returned failure.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4AB86614.7020803@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22 10:28:55 +02:00
Li Zefan
a4ec5e0c26 function-graph: use ftrace_graph_funcs directly
No need to store ftrace_graph_funcs in file->private.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AB32364.7020602@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-19 11:26:54 -04:00
Steven Rostedt
b375a11a23 tracing: switch function prints from %pf to %ps
For direct function pointers (like what mcount provides) PowerPC64
requires the use of %ps, otherwise nothing is printed.

This patch converts all prints of functions retrieved through mcount
to use the %ps format from the %pf.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-17 15:53:40 -04:00
Atsushi Tsuji
b36461da2a tracing: Fix minor bugs for __unregister_ftrace_function_probe
Fix the condition of strcmp for "*".
Also fix NULL pointer dereference when glob is NULL.

Signed-off-by: Atsushi Tsuji <a-tsuji@bk.jp.nec.com>
LKML-Reference: <4AAF6726.5090905@bk.jp.nec.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-16 09:08:54 -04:00
jolsa@redhat.com
689fd8b65d tracing: trace parser support for function and graph
Convert the writing to 'set_graph_function', 'set_ftrace_filter'
and 'set_ftrace_notrace' to use the generic trace_parser
'trace_get_user' function.

Removed FTRACE_ITER_CONT flag, since it's not needed after this change.

Minor fix in set_graph_function display - g_show function.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1252682969-3366-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-11 15:20:18 -04:00
Ingo Molnar
ed011b22ce Merge commit 'v2.6.31-rc9' into tracing/core
Merge reason: move from -rc5 to -rc9.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-06 06:11:42 +02:00
Jiri Olsa
eda1e32855 tracing: handle broken names in ftrace filter
If one filter item (for set_ftrace_filter and set_ftrace_notrace) is being
setup by more than 1 consecutive writes (FTRACE_ITER_CONT flag), it won't
be handled corretly.

I used following program to test/verify:

[snip]
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <string.h>

int main(int argc, char **argv)
{
        int fd, i;
        char *file = argv[1];

        if (-1 == (fd = open(file, O_WRONLY))) {
                perror("open failed");
                return -1;
        }

        for(i = 0; i < (argc - 2); i++) {
                int len = strlen(argv[2+i]);
                int cnt, off = 0;

                while(len) {
                        cnt = write(fd, argv[2+i] + off, len);
                        len -= cnt;
                        off += cnt;
                }
        }

        close(fd);
        return 0;
}
[snip]

before change:
sh-4.0# echo > ./set_ftrace_filter
sh-4.0# /test ./set_ftrace_filter "sys" "_open "
sh-4.0# cat ./set_ftrace_filter
#### all functions enabled ####
sh-4.0#

after change:
sh-4.0# echo > ./set_ftrace_notrace
sh-4.0# test ./set_ftrace_notrace "sys" "_open "
sh-4.0# cat ./set_ftrace_notrace
sys_open
sh-4.0#

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20090811152904.GA26065@jolsa.lab.eng.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 20:39:48 -04:00
Li Zefan
3be04b471b ftrace: Simplify seqfile code
Use seq_release_private().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A891AAB.8090701@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17 11:25:10 +02:00
Ingo Molnar
89034bc2c7 Merge branch 'linus' into tracing/core
Conflicts:
	kernel/trace/trace_events_filter.c

We use the tracing/core version.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11 14:19:09 +02:00
Steven Rostedt
8650ae32ef tracing: only truncate ftrace files when O_TRUNC is set
The current code will truncate the ftrace files contents if O_APPEND
is not set and the file is opened in write mode. This is incorrect.
It should only truncate the file if O_TRUNC is set. Otherwise
if one of these files is opened by a C program with fopen "r+",
it will incorrectly truncate the file.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-07-23 10:07:18 -04:00
Li Zefan
87827111a5 function-graph: Fix seqfile memory leak
Every time we cat set_graph_function, we leak memory allocated
by seq_open().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A67D907.2010500@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-07-23 09:53:23 -04:00
jolsa@redhat.com
566b0aaf79 tracing: Remove unused fields/variables
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: rostedt@goodmis.org
LKML-Reference: <1247773468-11594-2-git-send-email-jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-18 12:21:16 +02:00
Ingo Molnar
45bceffc30 Merge branch 'linus' into tracing/core
Merge reason: tracing/core was on an older, pre-rc1 base.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-18 12:20:01 +02:00
Xiao Guangrong
6f2f3cf00e tracing/function: Cleanup for function tracer
We can directly use %pf input format instead of kallsyms_lookup()
and %s input format

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-07-17 01:45:51 -04:00
Xiao Guangrong
64fbcd1628 tracing/function: Simplify __ftrace_replace_code()
Rewrite the __ftrace_replace_code() function, simplify it, but don't
change the code's logic.

First, we get the state we want to set, if the record has the same
state, then do nothing, otherwise enable/disable it.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-07-17 00:37:53 -04:00
Steven Rostedt
6ab5d668b1 tracing/function-profiler: do not free per cpu variable stat
The per cpu variable stat is freeded if we fail to allocate a name
on start up. This was due to stat at first being allocated in the
initial design. But since then, it has become a static per cpu variable
but the free on error was not removed.

Also added __init annotation to the function that this is in.

[ Impact: prevent possible memory corruption on low mem at boot up ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-13 11:01:10 +02:00
Li Zefan
a32c7765e2 tracing: Fix stack tracer sysctl handling
This made my machine completely frozen:

  # echo 1 > /proc/sys/kernel/stack_tracer_enabled
  # echo 2 > /proc/sys/kernel/stack_tracer_enabled

The cause is register_ftrace_function() was called twice.

Also fix ftrace_enabled sysctl, though seems nothing bad happened
as I tested it.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A448D17.9010305@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-26 20:48:39 +02:00
Li Zefan
0296e4254f ftrace: Fix the output of profile
The first entry of the ftrace profile was always skipped when
reading trace_stat/functionX.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A443D59.4080307@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-26 09:25:42 +02:00
Li Zefan
d82d62444f ftrace: Fix t_hash_start()
When the output of set_ftrace_filter is larger than PAGE_SIZE,
t_hash_start() will be called the 2nd time, and then we start
from the head of a hlist, which is wrong and causes some entries
to be outputed twice.

The worse is, if the hlist is large enough, reading set_ftrace_filter
won't stop but in a dead loop.

Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41876E.2060407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 11:02:53 +02:00
Li Zefan
694ce0a544 ftrace: Don't manipulate @pos in t_start()
It's rather confusing that in t_start(), in some cases @pos is
incremented, and in some cases it's decremented and then incremented.

This patch rewrites t_start() in a much more general way.

Thus we fix a bug that if ftrace_filtered == 1, functions have tracer
hooks won't be printed, because the branch is always unreachable:

static void *t_start(...)
{
	...
	if (!p)
		return t_hash_start(m, pos);
	return p;
}

Before:
  # echo 'sys_open' > /mnt/tracing/set_ftrace_filter
  # echo 'sys_write:traceon:4' >> /mnt/tracing/set_ftrace_filter
  sys_open

After:
  # echo 'sys_open' > /mnt/tracing/set_ftrace_filter
  # echo 'sys_write:traceon:4' >> /mnt/tracing/set_ftrace_filter
  sys_open
  sys_write:traceon:count=4

Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41874B.4090507@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 11:02:53 +02:00
Li Zefan
85951842a1 ftrace: Don't increment @pos in g_start()
It's wrong to increment @pos in g_start(). It causes some entries
lost when reading set_graph_function, if the output of the file
is larger than PAGE_SIZE.

Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A418738.7090401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 11:02:52 +02:00
Frederic Weisbecker
9ea1a153a4 tracing/urgent: warn in case of ftrace_start_up inbalance
Prevent from further ftrace_start_up inbalances so that we avoid
future nop patching omissions with dynamic ftrace.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2009-06-20 06:52:21 +02:00
Linus Torvalds
991ec02cdc Merge branch 'tracing-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  function-graph: always initialize task ret_stack
  function-graph: move initialization of new tasks up in fork
  function-graph: add memory barriers for accessing task's ret_stack
  function-graph: enable the stack after initialization of other variables
  function-graph: only allocate init tasks if it was not already done

Manually fix trivial conflict in kernel/trace/ftrace.c
2009-06-10 19:58:10 -07:00
Steven Rostedt
84047e360a function-graph: always initialize task ret_stack
On creating a new task while running the function graph tracer, if
we fail to allocate the ret_stack, and then fail the fork, the
code will free the parent ret_stack. This is because the child
duplicated the parent and currently points to the parent's ret_stack.

This patch always initializes the task's ret_stack to NULL.

[ Impact: prevent crash of parent on low memory during fork ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-02 16:51:55 -04:00
Steven Rostedt
26c01624a2 function-graph: add memory barriers for accessing task's ret_stack
The code that handles the tasks ret_stack allocation for every task
assumes that only an interrupt can cause issues (even though interrupts
are disabled).

In reality, the code is allocating the ret_stack for tasks that may be
running on other CPUs and there are not efficient memory barriers to
handle this case.

[ Impact: prevent crash due to using of uninitialized ret_stack variables ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-02 14:42:17 -04:00
Steven Rostedt
82310a3272 function-graph: enable the stack after initialization of other variables
The function graph tracer checks if the task_struct has ret_stack defined
to know if it is OK or not to use it. The initialization is done for
all tasks by one process, but the idle tasks use the same initialization
used by new tasks.

If an interrupt happens on an idle task that just had the ret_stack
created, but before the rest of the initialization took place, then
we can corrupt the return address of the functions.

This patch moves the setting of the task_struct's ret_stack to after
the other variables have been initialized.

[ Impact: prevent kernel panic on idle task when starting function graph ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-02 14:41:50 -04:00
Steven Rostedt
179c498ae2 function-graph: only allocate init tasks if it was not already done
When the function graph tracer is enabled, it calls the initialization
needed for the init tasks that would be called on all created tasks.

The problem is that this is called every time the function graph tracer
is enabled, and the ret_stack is allocated for the idle tasks each time.
Thus, the old ret_stack is lost and a memory leak is created.

This is also dangerous because if an interrupt happened on another CPU
with the init task and the ret_stack is replaced, we then lose all the
return pointers for the interrupt, and a crash would take place.

[ Impact: fix memory leak and possible crash due to race ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-02 12:03:19 -04:00
Steven Rostedt
0f6ce3de4e ftrace: do not profile functions when disabled
A race was found that if one were to enable and disable the function
profiler repeatedly, then the system can panic. This was because a profiled
function may be preempted just before disabling interrupts. While
the profiler is disabled and then reenabled, the preempted function
could start again, and access the hash as it is being initialized.

This just adds a check in the irq disabled part to check if the profiler
is enabled, and if it is not then it will just exit.

When the system is disabled, the profile_enabled variable is cleared
before calling the unregistering of the function profiler. This
unregistering calls stop machine which also acts as a synchronize schedule.

[ Impact: fix panic in enabling/disabling function profiler ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-01 23:26:23 -04:00
Steven Rostedt
2af15d6a44 ftrace: add kernel command line function filtering
When using ftrace=function on the command line to trace functions
on boot up, one can not filter out functions that are commonly called.

This patch adds two new ftrace command line commands.

  ftrace_notrace=function-list
  ftrace_filter=function-list

Where function-list is a comma separated list of functions to filter.
The ftrace_notrace will make the functions listed not be included
in the function tracing, and ftrace_filter will only trace the functions
listed.

These two act the same as the debugfs/tracing/set_ftrace_notrace and
debugfs/tracing/set_ftrace_filter respectively.

The simple glob expressions that are allowed by the filter files can also
be used by the command line interface.

	ftrace_notrace=rcu*,*lock,*spin*

Will not trace any function that starts with rcu, ends with lock, or has
the word spin in it.

Note, if the self tests are enabled, they may interfere with the filtering
set by the command lines.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-01 23:23:10 -04:00
Ming Lei
24ed0c4bfc tracing: fix check for return value of register_module_notifier
return zero should be correct, so fix it.

[ Impact: eliminate incorrect syslog message ]

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: rostedt@goodmis.org
LKML-Reference: <1242545498-7285-1-git-send-email-tom.leiming@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 10:24:13 +02:00
Steven Rostedt
93eb677d74 ftrace: use module notifier for function tracer
The hooks in the module code for the function tracer must be called
before any of that module code runs. The function tracer hooks
modify the module (replacing calls to mcount to nops). If the code
is executed while the change occurs, then the CPU can take a GPF.

To handle the above with a bit of paranoia, I originally implemented
the hooks as calls directly from the module code.

After examining the notifier calls, it looks as though the start up
notify is called before any of the module's code is executed. This makes
the use of the notify safe with ftrace.

Only the startup notify is required to be "safe". The shutdown simply
removes the entries from the ftrace function list, and does not modify
any code.

This change has another benefit. It removes a issue with a reverse dependency
in the mutexes of ftrace_lock and module_mutex.

[ Impact: fix lock dependency bug, cleanup ]

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-17 16:59:15 +02:00
Steven Rostedt
ad8d75fff8 tracing/events: move trace point headers into include/trace/events
Impact: clean up

Create a sub directory in include/trace called events to keep the
trace point headers in their own separate directory. Only headers that
declare trace points should be defined in this directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14 22:05:43 -04:00
Steven Rostedt
597af81537 function-graph: use int instead of atomic for ftrace_graph_active
Impact: cleanup

The variable ftrace_graph_active is only modified under the
ftrace_lock mutex, thus an atomic is not necessary for modification.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-07 14:43:08 +02:00
Frederic Weisbecker
5452af664f tracing/ftrace: factorize the tracing files creation
Impact: cleanup

Most of the tracing files creation follow the same pattern:

ret = debugfs_create_file(...)
if (!ret)
	pr_warning("Couldn't create ... entry\n")

Unify it!

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238109938-11840-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-07 14:43:07 +02:00
Ingo Molnar
93776a8ec7 Merge branch 'linus' into tracing/core
Merge reason: update to upstream tracing facilities

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07 13:47:45 +02:00
Steven Rostedt
2aad1b76e6 function-graph: allow unregistering twice
Impact: fix to permanent disabling of function graph tracer

There should be nothing to prevent a tracer from unregistering a
function graph callback more than once. This can simplify error paths.

But currently, the counter does not account for mulitple unregistering
of the function graph callback. If it happens, the function graph
tracer will be permanently disabled.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 14:47:42 +02:00
Steven Rostedt
34886c8bc5 tracing: add average time in function to function profiler
Show the average time in the function (Time / Hit)

  Function                               Hit    Time            Avg
  --------                               ---    ----            ---
  mwait_idle                              51    140326.6 us     2751.503 us
  smp_apic_timer_interrupt                47    3517.735 us     74.845 us
  schedule                                10    2738.754 us     273.875 us
  __schedule                              10    2732.857 us     273.285 us
  hrtimer_interrupt                       47    1896.104 us     40.342 us
  irq_exit                                56    1711.833 us     30.568 us
  __run_hrtimer                           47    1315.589 us     27.991 us
  tick_sched_timer                        47    1138.690 us     24.227 us
  do_softirq                              56    1116.829 us     19.943 us
  __do_softirq                            56    1066.932 us     19.052 us
  do_IRQ                                   9    926.153 us      102.905 us

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-25 21:03:36 -04:00
Steven Rostedt
318e0a73c9 tracing: remove on the fly allocator from function profiler
Impact: safer code

The on the fly allocator for the function profiler was to save
memory. But at the expense of stability. Although it survived several
tests, allocating from the function tracer is just too risky, just
to save space.

This patch removes the allocator and simply allocates enough entries
at start up.

Each function gets a profiling structure of 40 bytes. With an average
of 20K functions, and this is for each CPU, we have 800K per online
CPU. This is not too bad, at least for non-embedded.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-25 21:03:17 -04:00
Zhaolei
2a4efa4245 ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
"Because when we call ftrace_free_rec we change the rec->ip to point to the
  next record in the chain. Something is very wrong if rec->ip >= s &&
  rec->ip < e and the record is already free."

 "Note, use FTRACE_WARN_ON() macro. This way it shuts down ftrace if it is
  hit and helps to avoid further damage later."
                   -- Steven Rostedt <rostedt@goodmis.org>

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-25 17:45:36 -04:00
Steven Rostedt
fb9fb015e9 tracing: clean up tracing profiler
Ingo Molnar suggested clean ups for the profiling code. This patch
makes those updates.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-25 13:26:41 -04:00
Steven Rostedt
a2a16d6a31 function-graph: add option to calculate graph time or not
graph time is the time that a function is executing another function.
Thus if function A calls B, if graph-time is set, then the time for
A includes B. This is the default behavior. But if graph-time is off,
then the time spent executing B is subtracted from A.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24 23:41:11 -04:00
Steven Rostedt
cafb168a1c tracing: make the function profiler per cpu
Impact: speed enhancement

By making the function profiler record in per cpu data we not only
get better readings, avoid races, we also do not have to take any
locks.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24 23:41:10 -04:00
Steven Rostedt
0706f1c48c tracing: adding function timings to function profiler
If the function graph trace is enabled, the function profiler will
use it to take the timing of the functions.

 cat /debug/tracing/trace_stat/functions

  Function                               Hit    Time
  --------                               ---    ----
  mwait_idle                             127    183028.4 us
  schedule                                26    151997.7 us
  __schedule                              31    151975.1 us
  sys_wait4                                2    74080.53 us
  do_wait                                  2    74077.80 us
  sys_newlstat                           138    39929.16 us
  do_path_lookup                         179    39845.79 us
  vfs_lstat_fd                           138    39761.97 us
  user_path_at                           153    39469.58 us
  path_walk                              179    39435.76 us
  __link_path_walk                       189    39143.73 us
[...]

Note the times are skewed due to the function graph tracer not taking
into account schedules.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24 23:41:09 -04:00
Steven Rostedt
493762fc53 tracing: move function profiler data out of function struct
Impact: reduce size of memory in function profiler

The function profiler originally introduces its counters into the
function records itself. There is 20 thousand different functions on
a normal system, and that is adding 20 thousand counters for profiling
event when not needed.

A normal run of the profiler yields only a couple of thousand functions
executed, depending on what is being profiled. This means we have around
18 thousand useless counters.

This patch rectifies this by moving the data out of the function
records used by dynamic ftrace. Data is preallocated to hold the functions
when the profiling begins. Checks are made during profiling to see if
more recorcds should be allocated, and they are allocated if it is safe
to do so.

This also removes the dependency from using dynamic ftrace, and also
removes the overhead by having it enabled.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24 23:41:06 -04:00
Steven Rostedt
bac429f037 tracing: add function profiler
Impact: new profiling feature

This patch adds a function profiler. In debugfs/tracing/ two new
files are created.

  function_profile_enabled  - to enable or disable profiling

  trace_stat/functions   - the profiled functions.

For example:

  echo 1 > /debugfs/tracing/function_profile_enabled
  ./hackbench 50
  echo 0 > /debugfs/tracing/function_profile_enabled

yields:

  cat /debugfs/tracing/trace_stat/functions

  Function                               Hit
  --------                               ---
  _spin_lock                        10106442
  _spin_unlock                      10097492
  kfree                              6013704
  _spin_unlock_irqrestore            4423941
  _spin_lock_irqsave                 4406825
  __phys_addr                        4181686
  __slab_free                        4038222
  dput                               4030130
  path_put                           4023387
  unroll_tree_refs                   4019532
[...]

The most hit functions are listed first. Functions that are not
hit are not listed.

This feature depends on and uses dynamic function tracing. When the
function profiling is disabled, no overhead occurs. But it still
takes up around 300KB to hold the data, thus it is not recomended
to keep it enabled for systems low on memory.

When a '1' is echoed into the function_profile_enabled file, the
counters for is function is reset back to zero. Thus you can see what
functions are hit most by different programs.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24 23:40:00 -04:00
Lai Jiangshan
ee000b7f9f tracing: use union for multi-usages field
Impact: cleanup

struct dyn_ftrace::ip has different usages in his lifecycle,
we use union for it. And also for struct dyn_ftrace::flags.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <49C871BE.3080405@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24 16:43:12 +01:00
Lai Jiangshan
cc59c9e8d0 ftrace: show virtual PID
Impact: fix PID output under namespaces

When current namespace is not the global namespace,
pid read from set_ftrace_pid is no correct.

 # ~/newpid_namespace_run bash
 # echo $$
 1
 # echo 1 > set_ftrace_pid
 # cat set_ftrace_pid
 3756

Since we write virtual PID to set_ftrace_pid, we need get
virtual PID when we read it.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <49C84D65.9050606@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24 16:42:49 +01:00
Steven Rostedt
be6f164a02 function-graph: add option for include sleep times
Impact: give user a choice to show times spent while sleeping

The user may want to see the time a function spent sleeping.
This patch adds the trace option "sleep-time" to allow that.
The "sleep-time" option is default on.

 echo sleep-time > /debug/tracing/trace_options

produces:

 ------------------------------------------
 2)  avahi-d-3428  =>    <idle>-0
 ------------------------------------------

 2)               |      finish_task_switch() {
 2)   0.621 us    |        _spin_unlock_irq();
 2)   2.202 us    |      }
 2) ! 1002.197 us |    }
 2) ! 1003.521 us |  }

where as,

 echo nosleep-time > /debug/tracing/trace_options

produces:

 0)    <idle>-0    =>  yum-upd-3416
 ------------------------------------------

 0)               |              finish_task_switch() {
 0)   0.643 us    |                _spin_unlock_irq();
 0)   2.342 us    |              }
 0) + 41.302 us   |            }
 0) + 42.453 us   |          }

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24 11:06:24 -04:00
Steven Rostedt
8aef2d2856 function-graph: ignore times across schedule
Impact: more accurate timings

The current method of function graph tracing does not take into
account the time spent when a task is not running. This shows functions
that call schedule have increased costs:

 3) + 18.664 us   |      }
 ------------------------------------------
 3)    <idle>-0    =>  kblockd-123
 ------------------------------------------

 3)               |      finish_task_switch() {
 3)   1.441 us    |        _spin_unlock_irq();
 3)   3.966 us    |      }
 3) ! 2959.433 us |    }
 3) ! 2961.465 us |  }

This patch uses the tracepoint in the scheduling context switch to
account for time that has elapsed while a task is scheduled out.
Now we see:

 ------------------------------------------
 3)    <idle>-0    =>  edac-po-1067
 ------------------------------------------

 3)               |      finish_task_switch() {
 3)   0.685 us    |        _spin_unlock_irq();
 3)   2.331 us    |      }
 3) + 41.439 us   |    }
 3) + 42.663 us   |  }

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24 09:33:30 -04:00
Steven Rostedt
05ce5818ad function-graph: prevent more than one tracer registering
Impact: prevent crash due to multiple function graph tracers

The function graph tracer can currently only handle a single tracer
being registered. If another tracer registers with the function
graph tracer it can crash the system.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24 09:32:52 -04:00
Frederic Weisbecker
03303549b1 tracing/ftrace: fix the check on nopped sites
Impact: fix a dynamic tracing failure

Recently, the function and function graph tracers failed to use dynamic
tracing after the following commit:

fa9d13cf13
(ftrace: don't try to __ftrace_replace_code on !FTRACE_FL_CONVERTED rec)

The patch is right except a mistake on the check for the FTRACE_FL_CONVERTED
flag. The code patching is aborted in case of successfully nopped sites.
What we want is the opposite: ignore the callsites that haven't been nopped.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-16 22:15:36 -04:00
Lai Jiangshan
e94142a67f ftrace: remove struct list_head from struct dyn_ftrace
Impact: save memory

The struct dyn_ftrace table is very large, this patch will save
about 50%.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49BA2C9F.8020009@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 11:36:20 +01:00
Lai Jiangshan
850a80cfaa ftrace: use seq_read
Impact: cleanup

VFS layer has tested the file mode, we do not need test it.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49BA2BAB.6010608@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 11:35:31 +01:00
Zhaolei
fa9d13cf13 ftrace: don't try to __ftrace_replace_code on !FTRACE_FL_CONVERTED rec
Do __ftrace_replace_code for !FTRACE_FL_CONVERTED rec will always
fail, we should ignore this rec.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: "Steven Rostedt ;" <rostedt@goodmis.org>
LKML-Reference: <49BA2472.4060206@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 10:25:06 +01:00
Zhaolei
b00f0b6dc1 ftrace: avoid double-free of dyn_ftrace
If dyn_ftrace is freed before ftrace_release(), ftrace_release()
will free it again and make ftrace_free_records wrong.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: "Steven Rostedt ;" <rostedt@goodmis.org>
LKML-Reference: <49BA23D9.1050900@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 10:25:06 +01:00
KOSAKI Motohiro
10dd3ebe21 tracing: fix deadlock when setting set_ftrace_pid
Impact: fix deadlock while using set_ftrace_pid

Reproducer:

	# cd /sys/kernel/debug/tracing
	# echo $$ > set_ftrace_pid

	then, console becomes hung.

Details:

when writing set_ftracepid, kernel callstack is following

	ftrace_pid_write()
		mutex_lock(&ftrace_lock);
		ftrace_update_pid_func()
			mutex_lock(&ftrace_lock);
			mutex_unlock(&ftrace_lock);
		mutex_unlock(&ftrace_lock);

then, system always deadlocks when ftrace_pid_write() is called.

In past days, ftrace_pid_write() used ftrace_start_lock, but
commit e6ea44e9b4 consolidated
ftrace_start_lock to ftrace_lock.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <20090306151155.0778.A69D9226@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 12:07:38 +01:00
Steven Rostedt
5e2336a0d4 tracing: make all file_operations const
Impact: cleanup

All file_operations structures should be constant. No one is going to
change them.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-05 21:46:40 -05:00
Ingo Molnar
c478f87869 Merge branch 'tip/x86/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace
Conflicts:
	include/linux/ftrace.h
	kernel/trace/ftrace.c
2009-02-22 18:12:01 +01:00
Steven Rostedt
4377245aa9 ftrace: break out modify loop immediately on detection of error
Impact: added precaution on failure detection

Break out of the modifying loop as soon as a failure is detected.
This is just an added precaution found by code review and was not
found by any bug chasing.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-20 14:30:20 -05:00
Steven Rostedt
000ab69117 ftrace: allow archs to preform pre and post process for code modification
This patch creates the weak functions: ftrace_arch_code_modify_prepare
and ftrace_arch_code_modify_post_process that are called before and
after the stop machine is called to modify the kernel text.

If the arch needs to do pre or post processing, it only needs to define
these functions.

[ Update: Ingo Molnar suggested using the name ftrace_arch_code_modify_*
          over using ftrace_arch_modify_* ]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-20 13:16:18 -05:00
Frederic Weisbecker
f9349a8f97 tracing/function-graph-tracer: make set_graph_function file support ftrace regex
Impact: trace only functions matching a pattern

The set_graph_function file let one to trace only one or several
chosen functions and follow all their code flow.

Currently, only a constant function name is allowed so this patch
allows the ftrace_regex functions:

- matches all functions that end with "name":
  echo *name > set_graph_function

- matches all functions that begin with "name":
  echo name* > set_graph_function

- matches all functions that contains "name":
  echo *name* > set_graph_function

Example:

echo mutex* > set_graph_function

 0)               |  mutex_lock_nested() {
 0)   0.563 us    |    __might_sleep();
 0)   2.072 us    |  }
 0)               |  mutex_unlock() {
 0)   1.036 us    |    __mutex_unlock_slowpath();
 0)   2.433 us    |  }
 0)               |  mutex_unlock() {
 0)   0.691 us    |    __mutex_unlock_slowpath();
 0)   1.787 us    |  }
 0)               |  mutex_lock_interruptible_nested() {
 0)   0.548 us    |    __might_sleep();
 0)   1.945 us    |  }

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-20 11:36:24 +01:00
Ingo Molnar
ac07bcaa82 Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-02-18 01:09:07 +01:00
Ingo Molnar
37bd824a35 Merge branches 'tracing/ftrace' and 'tracing/urgent' into tracing/core 2009-02-18 01:08:13 +01:00
Frederic Weisbecker
5b058bcde9 tracing/function-graph-tracer: trace the idle tasks
When the function graph tracer is activated, it iterates over the task_list
to allocate a stack to store the return addresses.

But the per cpu idle tasks are not iterated by using
do_each_thread / while_each_thread.

So we have to iterate on them manually.

This fixes somes weirdness in the traces and many losses of traces.
Examples on two cpus:

 0)   Xorg-4287    |   2.906 us    |              }
 0)   Xorg-4287    |   3.965 us    |            }
 0)   Xorg-4287    |   5.302 us    |          }
 ------------------------------------------
 0)   Xorg-4287    =>    <idle>-0
 ------------------------------------------

 0)    <idle>-0    |   2.861 us    |                        }
 0)    <idle>-0    |   0.526 us    |                        set_normalized_timespec();
 0)    <idle>-0    |   7.201 us    |                      }
 0)    <idle>-0    |   8.214 us    |                    }
 0)    <idle>-0    |               |                    clockevents_program_event() {
 0)    <idle>-0    |               |                      lapic_next_event() {
 0)    <idle>-0    |   0.510 us    |                        native_apic_mem_write();
 0)    <idle>-0    |   1.546 us    |                      }
 0)    <idle>-0    |   2.583 us    |                    }
 0)    <idle>-0    | + 12.435 us   |                  }
 0)    <idle>-0    | + 13.470 us   |                }
 0)    <idle>-0    |   0.608 us    |                _spin_unlock_irqrestore();
 0)    <idle>-0    | + 23.270 us   |              }
 0)    <idle>-0    | + 24.336 us   |            }
 0)    <idle>-0    | + 25.417 us   |          }
 0)    <idle>-0    |   0.593 us    |          _spin_unlock();
 0)    <idle>-0    | + 41.869 us   |        }
 0)    <idle>-0    | + 42.906 us   |      }
 0)    <idle>-0    | + 95.035 us   |    }
 0)    <idle>-0    |   0.540 us    |    menu_reflect();
 0)    <idle>-0    | ! 100.404 us  |  }
 0)    <idle>-0    |   0.564 us    |  mce_idle_callback();
 0)    <idle>-0    |               |  enter_idle() {
 0)    <idle>-0    |   0.526 us    |    mce_idle_callback();
 0)    <idle>-0    |   1.757 us    |  }
 0)    <idle>-0    |               |  cpuidle_idle_call() {
 0)    <idle>-0    |               |    menu_select() {
 0)    <idle>-0    |   0.525 us    |      pm_qos_requirement();
 0)    <idle>-0    |   0.518 us    |      tick_nohz_get_sleep_length();
 0)    <idle>-0    |   2.621 us    |    }
[...]
 1)    <idle>-0    |   0.518 us    |              touch_softlockup_watchdog();
 1)    <idle>-0    | + 14.355 us   |            }
 1)    <idle>-0    | + 22.840 us   |          }
 1)    <idle>-0    | + 25.949 us   |        }
 1)    <idle>-0    |               |        handle_irq() {
 1)    <idle>-0    |   0.511 us    |          irq_to_desc();
 1)    <idle>-0    |               |          handle_edge_irq() {
 1)    <idle>-0    |   0.638 us    |            _spin_lock();
 1)    <idle>-0    |               |            ack_apic_edge() {
 1)    <idle>-0    |   0.510 us    |              irq_to_desc();
 1)    <idle>-0    |               |              move_native_irq() {
 1)    <idle>-0    |   0.510 us    |                irq_to_desc();
 1)    <idle>-0    |   1.532 us    |              }
 1)    <idle>-0    |   0.511 us    |              native_apic_mem_write();
 ------------------------------------------
 1)    <idle>-0    =>    cat-5073
 ------------------------------------------

 1)    cat-5073    |   3.731 us    |                    }
 1)    cat-5073    |               |                    run_local_timers() {
 1)    cat-5073    |   0.533 us    |                      hrtimer_run_queues();
 1)    cat-5073    |               |                      raise_softirq() {
 1)    cat-5073    |               |                        __raise_softirq_irqoff() {
 1)    cat-5073    |               |                          /* nr: 1 */
 1)    cat-5073    |   2.718 us    |                        }
 1)    cat-5073    |   3.814 us    |                      }

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 19:20:17 +01:00
Steven Rostedt
b6887d7916 ftrace: rename _hook to _probe
Impact: clean up

Ingo Molnar did not like the _hook naming convention used by the
select function tracer. Luis Claudio R. Goncalves suggested using
the "_probe" extension. This patch implements the change of
calling the functions and variables "_hook" and replacing them
with "_probe".

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-17 12:32:04 -05:00
Steven Rostedt
6a24a244cd ftrace: clean up coding style
Ingo Molnar pointed out some coding style issues with the recent ftrace
updates. This patch cleans them up.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-17 11:20:26 -05:00
Ingo Molnar
73d3fd96e7 ftrace: fix !CONFIG_DYNAMIC_FTRACE ftrace_swapper_pid definition
Impact: build fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 11:50:42 +01:00
Steven Rostedt
809dcf29ce ftrace: add pretty print to selected fuction traces
This patch adds a call back for the tracers that have hooks to
selected functions. This allows the tracer to show better output
in the set_ftrace_filter file.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 23:06:01 -05:00
Steven Rostedt
8fc0c701c5 ftrace: show selected functions in set_ftrace_filter
This patch adds output to show what functions have tracer hooks
attached to them.

  # echo 'sys_open:traceon:4' > /debug/tracing/set_ftrace_filter
  # cat set_ftrace_filter

 #### all functions enabled ####
 sys_open:ftrace_traceon:0000000000000004

  # echo 'do_fork:traceoff:' > set_ftrace_filter
  # cat set_ftrace_filter

 #### all functions enabled ####
 sys_open:ftrace_traceon:0000000000000002
 do_fork:ftrace_traceoff:ffffffffffffffff

Note the 4 changed to a 2. This is because The code was executed twice
since the traceoff was added. If a cat is done again:

 #### all functions enabled ####
 sys_open:ftrace_traceon
 do_fork:ftrace_traceoff:ffffffffffffffff

The number disappears. That is because it will not print a NULL.

Callbacks to allow the tracer to pretty print will be implemented soon.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 22:50:06 -05:00
Steven Rostedt
59df055f19 ftrace: trace different functions with a different tracer
Impact: new feature

Currently, the function tracer only gives you an ability to hook
a tracer to all functions being traced. The dynamic function trace
allows you to pick and choose which of those functions will be
traced, but all functions being traced will call all tracers that
registered with the function tracer.

This patch adds a new feature that allows a tracer to hook to specific
functions, even when all functions are being traced. It allows for
different functions to call different tracer hooks.

The way this is accomplished is by a special function that will hook
to the function tracer and will set up a hash table knowing which
tracer hook to call with which function. This is the most general
and easiest method to accomplish this. Later, an arch may choose
to supply their own method in changing the mcount call of a function
to call a different tracer. But that will be an exercise for the
future.

To register a function:

 struct ftrace_hook_ops {
	void			(*func)(unsigned long ip,
					unsigned long parent_ip,
					void **data);
	int			(*callback)(unsigned long ip, void **data);
	void			(*free)(void **data);
 };

 int register_ftrace_function_hook(char *glob, struct ftrace_hook_ops *ops,
				  void *data);

glob is a simple glob to search for the functions to hook.
ops is a pointer to the operations (listed below)
data is the default data to be passed to the hook functions when traced

ops:
 func is the hook function to call when the functions are traced
 callback is a callback function that is called when setting up the hash.
   That is, if the tracer needs to do something special for each
   function, that is being traced, and wants to give each function
   its own data. The address of the entry data is passed to this
   callback, so that the callback may wish to update the entry to
   whatever it would like.
 free is a callback for when the entry is freed. In case the tracer
   allocated any data, it is give the chance to free it.

To unregister we have three functions:

  void
  unregister_ftrace_function_hook(char *glob, struct ftrace_hook_ops *ops,
				void *data)

This will unregister all hooks that match glob, point to ops, and
have its data matching data. (note, if glob is NULL, blank or '*',
all functions will be tested).

  void
  unregister_ftrace_function_hook_func(char *glob,
				 struct ftrace_hook_ops *ops)

This will unregister all functions matching glob that has an entry
pointing to ops.

  void unregister_ftrace_function_hook_all(char *glob)

This simply unregisters all funcs.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 22:44:09 -05:00
Steven Rostedt
e6ea44e9b4 ftrace: consolidate mutexes
Impact: clean up

Now that ftrace_lock is a mutex, there is no reason to have three
different mutexes protecting similar data. All the mutex paths
are not in hot paths, so having a mutex to cover more data is
not a problem.

This patch removes the ftrace_sysctl_lock and ftrace_start_lock
and uses the ftrace_lock to protect the locations that were protected
by these locks. By doing so, this change also removes some of
the lock nesting that was taking place.

There are still more mutexes in ftrace.c that can probably be
consolidated, but they can be dealt with later. We need to be careful
about the way the locks are nested, and by consolidating, we can cause
a recursive deadlock.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 18:15:31 -05:00
Steven Rostedt
52baf11922 ftrace: convert ftrace_lock from a spinlock to mutex
Impact: clean up

The older versions of ftrace required doing the ftrace list
search under atomic context. Now all the calls are in non-atomic
context. There is no reason to keep the ftrace_lock as a spinlock.

This patch converts it to a mutex.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 17:33:14 -05:00
Steven Rostedt
f6180773d9 ftrace: add command interface for function selection
Allow for other tracers to add their own commands for function
selection. This interface gives a trace the ability to name a
command for function selection. Right now it is pretty limited
in what it offers, but this is a building step for more features.

The :mod: command is converted to this interface and also serves
as a template for other implementations.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 17:06:02 -05:00
Steven Rostedt
e68746a271 ftrace: enable filtering only when a function is filtered on
Impact: fix to prevent empty set_ftrace_filter and no ftrace output

The function filter is used to only trace a given set of functions.
The filter is enabled when a function name is echoed into the
set_ftrace_filter file. But if the name has a typo and the function
is not found, the filter is enabled, but no function is listed.

This makes a confusing situation where set_ftrace_filter is empty
but no functions ever get enabled for tracing.

For example:

 # cat /debug/tracing/set_ftrace_filter

  #### all functions enabled ####

 # echo bad_name > set_ftrace_filter
 # cat /debug/tracing/set_ftrace_filter

 # echo function > current_tracer
 # cat trace

  # tracer: nop
  #
  #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
  #              | |       |          |         |

This patch changes that to only enable filtering if a function
is set to be filtered on. Now, the filter is not enabled if
a bad name is echoed into set_ftrace_filter.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 17:03:49 -05:00
Steven Rostedt
64e7c44061 ftrace: add module command function filter selection
This patch adds a "command" syntax to the function filtering files:

  /debugfs/tracing/set_ftrace_filter
  /debugfs/tracing/set_ftrace_notrace

Of the format:  <function>:<command>:<parameter>

The command is optional, and dependent on the command, so are
the parameters.

 echo do_fork > set_ftrace_filter

Will only trace 'do_fork'.

 echo 'sched_*' > set_ftrace_filter

Will only trace functions starting with the letters 'sched_'.

 echo '*:mod:ext3' > set_ftrace_filter

Will trace only the ext3 module functions.

 echo '*write*:mod:ext3' > set_ftrace_notrace

Will prevent the ext3 functions with the letters 'write' in
the name from being traced.

 echo '!*_allocate:mod:ext3' > set_ftrace_filter

Will remove the functions in ext3 that end with the letters
'_allocate' from the ftrace filter.

Although this patch implements the 'command' format, only the
'mod' command is supported. More commands to follow.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 16:55:50 -05:00
Steven Rostedt
9f4801e30a ftrace: break up ftrace_match_records into smaller components
Impact: clean up

ftrace_match_records does a lot of things that other features
can use. This patch breaks up ftrace_match_records and pulls
out ftrace_setup_glob and ftrace_match_record.

ftrace_setup_glob prepares a simple glob expression for use with
ftrace_match_record. ftrace_match_record compares a single record
with a glob type.

Breaking this up will allow for more features to run on individual
records.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 16:49:57 -05:00
Steven Rostedt
7f24b31b01 ftrace: rename ftrace_match to ftrace_match_records
Impact: clean up

ftrace_match is too generic of a name. What it really does is
search all records and matches the records with the given string,
and either sets or unsets the functions to be traced depending
on if the parameter 'enable' is set or not.

This allows us to make another function called ftrace_match that
can be used to test a single record.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 16:33:15 -05:00
Steven Rostedt
265c831cb0 ftrace: add do_for_each_ftrace_rec and while_for_each_ftrace_rec
Impact: clean up

To iterate over all the functions that dynamic trace knows about
it requires two for loops. One to iterate over the pages and the
other to iterate over the records within the page.

There are several duplications of these loops in ftrace.c. This
patch creates the macros do_for_each_ftrace_rec and
while_for_each_ftrace_rec to handle this logic, and removes the
duplicate code.

While making this change, I also discovered and fixed a small
bug that one of the iterations should exit the loop after it found the
record it was searching for. This used a break when it should have
used a goto, since there were two loops it needed to break out
from.  No real harm was done by this bug since it would only continue
to search the other records, and the code was in a slow path anyway.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 16:25:12 -05:00
Steven Rostedt
0c75a3ed63 ftrace: state that all functions are enabled in set_ftrace_filter
Impact: clean up, make set_ftrace_filter less confusing

The set_ftrace_filter shows only the functions that will be traced.
But when it is empty, it will trace all functions. This can be a bit
confusing.

This patch makes set_ftrace_filter show:

  #### all functions enabled ####

When all functions will be traced, and we do not filter only a select
few.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 16:21:35 -05:00
Wenji Huang
57794a9d48 trace: trivial fixes in comment typos.
Impact: clean up

Fixed several typos in the comments.

Signed-off-by: Wenji Huang <wenji.huang@oracle.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-07 20:03:36 -05:00
Ingo Molnar
ce70a0b472 Merge branches 'tracing/blktrace', 'tracing/ftrace', 'tracing/urgent' and 'linus' into tracing/core 2009-02-04 20:45:41 +01:00
Oleg Nesterov
229c4ef8ae ftrace: do_each_pid_task() needs rcu lock
"ftrace: use struct pid" commit 978f3a45d9
converted ftrace_pid_trace to "struct pid*".

But we can't use do_each_pid_task() without rcu_read_lock() even if
we know the pid itself can't go away (it was pinned in ftrace_pid_write).
The exiting task can detach itself from this pid at any moment.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-03 22:50:58 +01:00
Frederic Weisbecker
00f57f545a tracing/function-graph-tracer: fix a regression while suspend to disk
Impact: fix a crash while kernel image restore

When the function graph tracer is running and while suspend to disk, some racy
and dangerous things happen against this tracer.

The current task will save its registers including the stack pointer which
contains the return address hooked by the tracer. But the current task will
continue to enter other functions after that to save the memory, and then
it will store other return addresses, and finally loose the old depth which
matches the return address saved in the old stack (during the registers saving).

So on image restore, the code will return to wrong addresses.
And there are other things: on restore, the task will have it's "current"
pointer overwritten during registers restoring....switching from one task to
another... That would be insane to try to trace function graphs at these
stages.

This patch makes the function graph tracer listening on power events, making
it's tracing disabled for the current task (the one that performs the
hibernation work) while suspend/resume to disk, making the tracing safe
during hibernation.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 15:21:30 +01:00
Frederic Weisbecker
4a2b8dda3f tracing/function-graph-tracer: fix a regression while suspend to disk
Impact: fix a crash while kernel image restore

When the function graph tracer is running and while suspend to disk, some racy
and dangerous things happen against this tracer.

The current task will save its registers including the stack pointer which
contains the return address hooked by the tracer. But the current task will
continue to enter other functions after that to save the memory, and then
it will store other return addresses, and finally loose the old depth which
matches the return address saved in the old stack (during the registers saving).

So on image restore, the code will return to wrong addresses.
And there are other things: on restore, the task will have it's "current"
pointer overwritten during registers restoring....switching from one task to
another... That would be insane to try to trace function graphs at these
stages.

This patch makes the function graph tracer listening on power events, making
it's tracing disabled for the current task (the one that performs the
hibernation work) while suspend/resume to disk, making the tracing safe
during hibernation.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15 09:47:40 +01:00
Uwe Kleine-Koenig
32632920a7 ftrace, trivial: fix typo "resgister" -> "register"
Signed-off-by: Uwe Kleine-Koenig <ukleinek@strlen.de>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 12:11:49 +01:00
Shaohua Li
f00012074b ftrace, ia64: Add macro for ftrace_caller
Define FTRACE_ADDR. In IA64, a function pointer isn't a 'unsigned long' but a
'struct {unsigned long ip, unsigned long gp}'.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 12:11:18 +01:00
Shaohua Li
25aac9dc7c ftrace, ia64: explictly ignore a file in recordmcount.pl
In IA64, a function pointer isn't a 'unsigned long' but a
'struct {unsigned long ip, unsigned long gp}'. MCOUNT_ADDR is determined
at link time not compile time, so explictly ignore kernel/trace/ftrace.o
in recordmcount.pl.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 12:11:13 +01:00
Steven Rostedt
431aa3fbf5 ftrace: convert unsigned index to signed
Impact: fix to unsigned compared to less than zero

Roel Kluin pointed out that there is a compare of an unsigned number
to less than zero. A previous clean up had the unsigned index set
to -1 for certain cases, but never converted it to signed.

Frederic Weisbecker noticed that another index is used to compare
the above index to and it also needs to be converted to signed.

[
  Converted ftrace_page->index to int from unsigned long as
  Andrew Morton pointed out that there's no need for it to
  stay a long.
]

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-07 10:43:52 +01:00
Steven Rostedt
ea3a6d6d60 ftrace: add not to regex on filtering functions
Impact: enhancement

Ingo Molnar has asked about a way to remove items from the filter
lists. Currently, you can only add or replace items. The way
items are added to the list is through opening one of the list
files (set_ftrace_filter or set_ftrace_notrace) via append.
If the file is opened for truncate, the list is cleared.

  echo spin_lock > /debug/tracing/set_ftrace_filter

The above will replace the list with only spin_lock

  echo spin_lock >> /debug/tracing/set_ftrace_filter

The above will add spin_lock to the list.

Now this patch adds:

  echo '!spin_lock' >> /debug/tracing/set_ftrace_filter

This will remove spin_lock from the list.

The limited glob features of these lists also can be notted.

  echo '!spin_*' >> /debug/tracing/set_ftrace_filter

This will remove all functions that start with 'spin_'

Note:

  echo '!spin_*' > /debug/tracing/set_ftrace_filter

will simply clear out the list (notice the '>' instead of '>>')

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 12:57:09 +01:00
Frederic Weisbecker
380c4b1411 tracing/function-graph-tracer: append the tracing_graph_flag
Impact: Provide a way to pause the function graph tracer

As suggested by Steven Rostedt, the previous patch that prevented from
spinlock function tracing shouldn't use the raw_spinlock to fix it.
It's much better to follow lockdep with normal spinlock, so this patch
adds a new flag for each task to make the function graph tracer able
to be paused. We also can send an ftrace_printk whithout worrying of
the irrelevant traced spinlock during insertion.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 15:11:45 +01:00
Steven Rostedt
21bbecdaae ftrace: use init_struct_pid as swapper pid
Impact: clean up

Using (struct pid *)-1 as the pointer for ftrace_swapper_pid is
a little confusing for others. This patch uses the address of the
actual init pid structure instead. This change is only for
clarity. It does not affect the code itself. Hopefully soon the
swapper tasks will all have their own pid structure and then
we can clean up the code a bit more.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-05 14:51:29 +01:00
Liming Wang
faec2ec505 ftrace: avoid duplicated function when writing set_graph_function
Impact: fix a bug in function filter setting

when writing function to set_graph_function, we should check whether it
has existed in set_graph_function to avoid duplicating.

Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:42:35 +01:00
Steven Rostedt
e32d895691 ftrace: add ability to only trace swapper tasks
Impact: new feature

This patch lets the swapper tasks of all CPUS be filtered by the
set_ftrace_pid file.

If '0' is echoed into this file, then all the idle tasks (aka swapper)
is flagged to be traced.  This affects all CPU idle tasks.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:09:38 +01:00
Steven Rostedt
978f3a45d9 ftrace: use struct pid
Impact: clean up, extend PID filtering to PID namespaces

Eric Biederman suggested using the struct pid for filtering on
pids in the kernel. This patch is based off of a demonstration
of an implementation that Eric sent me in an email.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:09:37 +01:00
Steven Rostedt
804a685162 ftrace: trace single pid for function graph tracer
Impact: New feature

This patch makes the changes to set_ftrace_pid apply to the function
graph tracer.

  # echo $$ > /debugfs/tracing/set_ftrace_pid
  # echo function_graph > /debugfs/tracing/current_tracer

Will cause only the current task to be traced. Note, the trace flags are
also inherited by child processes, so the children of the shell
will also be traced.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:09:36 +01:00
Steven Rostedt
0ef8cde56a ftrace: use task struct trace flag to filter on pid
Impact: clean up

Use the new task struct trace flags to determine if a process should be
traced or not.

Note: this moves the searching of the pid to the slow path of setting
the pid field. This needs to be converted to the pid name space.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:09:35 +01:00
Steven Rostedt
ea4e2bc4d9 ftrace: graph of a single function
This patch adds the file:

   /debugfs/tracing/set_graph_function

which can be used along with the function graph tracer.

When this file is empty, the function graph tracer will act as
usual. When the file has a function in it, the function graph
tracer will only trace that function.

For example:

 # echo blk_unplug > /debugfs/tracing/set_graph_function
 # cat /debugfs/tracing/trace
 [...]
 ------------------------------------------
 | 2)  make-19003  =>  kjournald-2219
 ------------------------------------------

 2)               |  blk_unplug() {
 2)               |    dm_unplug_all() {
 2)               |      dm_get_table() {
 2)      1.381 us |        _read_lock();
 2)      0.911 us |        dm_table_get();
 2)      1. 76 us |        _read_unlock();
 2) +   12.912 us |      }
 2)               |      dm_table_unplug_all() {
 2)               |        blk_unplug() {
 2)      0.778 us |          generic_unplug_device();
 2)      2.409 us |        }
 2)      5.992 us |      }
 2)      0.813 us |      dm_table_put();
 2) +   29. 90 us |    }
 2) +   34.532 us |  }

You can add up to 32 functions into this file. Currently we limit it
to 32, but this may change with later improvements.

To add another function, use the append '>>':

  # echo sys_read >> /debugfs/tracing/set_graph_function
  # cat /debugfs/tracing/set_graph_function
  blk_unplug
  sys_read

Using the '>' will clear out the function and write anew:

  # echo sys_write > /debug/tracing/set_graph_function
  # cat /debug/tracing/set_graph_function
  sys_write

Note, if you have function graph running while doing this, the small
time between clearing it and updating it will cause the graph to
record all functions. This should not be an issue because after
it sets the filter, only those functions will be recorded from then on.
If you need to only record a particular function then set this
file first before starting the function graph tracer. In the future
this side effect may be corrected.

The set_graph_function file is similar to the set_ftrace_filter but
it does not take wild cards nor does it allow for more than one
function to be set with a single write. There is no technical reason why
this is the case, I just do not have the time yet to implement that.

Note, dynamic ftrace must be enabled for this to appear because it
uses the dynamic ftrace records to match the name to the mcount
call sites.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:09:34 +01:00
Steven Rostedt
e49dc19c6a ftrace: function graph return for function entry
Impact: feature, let entry function decide to trace or not

This patch lets the graph tracer entry function decide if the tracing
should be done at the end as well. This requires all function graph
entry functions return 1 if it should trace, or 0 if the return should
not be traced.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:26 +01:00
Steven Rostedt
14a866c567 ftrace: add ftrace_graph_stop()
Impact: new ftrace_graph_stop function

While developing more features of function graph, I hit a bug that
caused the WARN_ON to trigger in the prepare_ftrace_return function.
Well, it was hard for me to find out that was happening because the
bug would not print, it would just cause a hard lockup or reboot.
The reason is that it is not safe to call printk from this function.

Looking further, I also found that it calls unregister_ftrace_graph,
which grabs a mutex and calls kstop machine. This would definitely
lock the box up if it were to trigger.

This patch adds a fast and safe ftrace_graph_stop() which will
stop the function tracer. Then it is safe to call the WARN ON.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:23 +01:00
Ingo Molnar
f0461d0146 Merge branches 'tracing/ftrace' and 'tracing/function-graph-tracer' into tracing/core 2008-12-03 08:49:21 +01:00
Frederic Weisbecker
48d68b20d0 tracing/function-graph-tracer: support for x86-64
Impact: extend and enable the function graph tracer to 64-bit x86

This patch implements the support for function graph tracer under x86-64.
Both static and dynamic tracing are supported.

This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I
wanted to use probe_kernel_read/write to make the return address
saving/patching code more generic but it causes tracing recursion.

That would be perhaps useful to implement a notrace version of these
function for other archs ports.

Note that arch/x86/process_64.c is not traced, as in X86-32. I first
thought __switch_to() was responsible of crashes during tracing because I
believed current task were changed inside but that's actually not the
case (actually yes, but not the "current" pointer).

So I will have to investigate to find the functions that harm here, to
enable tracing of the other functions inside (but there is no issue at
this time, while process_64.c stays out of -pg flags).

A little possible race condition is fixed inside this patch too. When the
tracer allocate a return stack dynamically, the current depth is not
initialized before but after. An interrupt could occur at this time and,
after seeing that the return stack is allocated, the tracer could try to
trace it with a random uninitialized depth. It's a prevention, even if I
hadn't problems with it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 09:47:48 +01:00
Liming Wang
66eafebc10 function trace: fix a bug of single thread function trace
Impact: fix "no output from tracer" bug caused by ftrace_update_pid_func()

When disabling single thread function trace using
"echo -1 > set_ftrace_pid", the normal function trace
has to restore to original function, otherwise the normal
function trace will not work well.

Without this commit, something like below:

	$ ps |grep 850
	  850 root      2556 S    -/bin/sh
	$ echo 850 > /debug/tracing/set_ftrace_pid
	$ echo function > /debug/tracing/current_tracer
	$ echo 1 > /debug/tracing/tracing_enabled
	$ sleep 1
	$ echo 0 > /debug/tracing/tracing_enabled
	$ cat /debug/tracing/trace_pipe |wc -l
	59704
	$ echo -1 > /debug/tracing/set_ftrace_pid
	$ echo 1 > /debug/tracing/tracing_enabled
	$ sleep 1
	$ echo 0 > /debug/tracing/tracing_enabled
	$ more /debug/tracing/trace_pipe
		<====== nothing output now!
			it should output trace record.

Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 09:23:24 +01:00
Liming Wang
50cdaf08a8 ftrace: improve seq_operation of ftrace
Impact: make ftrace position computing more sane

First remove useless ->pos field. Then we needn't check seq_printf
in .show like other place.

Signed-off-by: Liming Wang <liming.wang@windriver.com>
Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-28 12:30:40 +01:00
Steven Rostedt
e53a6319cc ftrace: let function tracing and function return run together
Impact: feature

This patch enables function tracing and function return to run together.
I've tested this by enabling the stack tracer and return tracer, where
both the function entry and function return are used together with
dynamic ftrace.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 06:52:55 +01:00
Steven Rostedt
5a45cfe1c6 ftrace: use code patching for ftrace graph tracer
Impact: more efficient code for ftrace graph tracer

This patch uses the dynamic patching, when available, to patch
the function graph code into the kernel.

This patch will ease the way for letting both function tracing
and function graph tracing run together.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 06:52:54 +01:00
Steven Rostedt
df4fc31558 ftrace: add function tracing to single thread
Impact: feature to function trace a single thread

This patch adds the ability to function trace a single thread.
The file:

  /debugfs/tracing/set_ftrace_pid

contains the pid to trace. Valid pids are any positive integer.
Writing any negative number to this file will disable the pid
tracing and the function tracer will go back to tracing all of
threads.

This feature works with both static and dynamic function tracing.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 06:52:52 +01:00
Frederic Weisbecker
287b6e68ca tracing/function-return-tracer: set a more human readable output
Impact: feature

This patch sets a C-like output for the function graph tracing.
For this aim, we now call two handler for each function: one on the entry
and one other on return. This way we can draw a well-ordered call stack.

The pid of the previous trace is loosely stored to be compared against
the one of the current trace to see if there were a context switch.

Without this little feature, the call tree would seem broken at
some locations.
We could use the sched_tracer to capture these sched_events but this
way of processing is much more simpler.

2 spaces have been chosen for indentation to fit the screen while deep
calls. The time of execution in nanosecs is printed just after closed
braces, it seems more easy this way to find the corresponding function.
If the time was printed as a first column, it would be not so easy to
find the corresponding function if it is called on a deep depth.

I plan to output the return value but on 32 bits CPU, the return value
can be 32 or 64, and its difficult to guess on which case we are.
I don't know what would be the better solution on X86-32: only print
eax (low-part) or even edx (high-part).

Actually it's thee same problem when a function return a 8 bits value, the
high part of eax could contain junk values...

Here is an example of trace:

sys_read() {
  fget_light() {
  } 526
  vfs_read() {
    rw_verify_area() {
      security_file_permission() {
        cap_file_permission() {
        } 519
      } 1564
    } 2640
    do_sync_read() {
      pipe_read() {
        __might_sleep() {
        } 511
        pipe_wait() {
          prepare_to_wait() {
          } 760
          deactivate_task() {
            dequeue_task() {
              dequeue_task_fair() {
                dequeue_entity() {
                  update_curr() {
                    update_min_vruntime() {
                    } 504
                  } 1587
                  clear_buddies() {
                  } 512
                  add_cfs_task_weight() {
                  } 519
                  update_min_vruntime() {
                  } 511
                } 5602
                dequeue_entity() {
                  update_curr() {
                    update_min_vruntime() {
                    } 496
                  } 1631
                  clear_buddies() {
                  } 496
                  update_min_vruntime() {
                  } 527
                } 4580
                hrtick_update() {
                  hrtick_start_fair() {
                  } 488
                } 1489
              } 13700
            } 14949
          } 16016
          msecs_to_jiffies() {
          } 496
          put_prev_task_fair() {
          } 504
          pick_next_task_fair() {
          } 489
          pick_next_task_rt() {
          } 496
          pick_next_task_fair() {
          } 489
          pick_next_task_idle() {
          } 489

------------8<---------- thread 4 ------------8<----------

finish_task_switch() {
} 1203
do_softirq() {
  __do_softirq() {
    __local_bh_disable() {
    } 669
    rcu_process_callbacks() {
      __rcu_process_callbacks() {
        cpu_quiet() {
          rcu_start_batch() {
          } 503
        } 1647
      } 3128
      __rcu_process_callbacks() {
      } 542
    } 5362
    _local_bh_enable() {
    } 587
  } 8880
} 9986
kthread_should_stop() {
} 669
deactivate_task() {
  dequeue_task() {
    dequeue_task_fair() {
      dequeue_entity() {
        update_curr() {
          calc_delta_mine() {
          } 511
          update_min_vruntime() {
          } 511
        } 2813

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 01:59:45 +01:00
Frederic Weisbecker
fb52607afc tracing/function-return-tracer: change the name into function-graph-tracer
Impact: cleanup

This patch changes the name of the "return function tracer" into
function-graph-tracer which is a more suitable name for a tracing
which makes one able to retrieve the ordered call stack during
the code flow.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 01:59:45 +01:00
Frederic Weisbecker
eae849ca03 tracing/function-return-tracer: don't trace kfree while it frees the return stack
Impact: fix a crash

While I killed the cat process, I got sometimes the following (but rare)
crash:

[   65.689027] Pid: 2969, comm: cat Not tainted (2.6.28-rc6-tip ) AMILO Li 2727
[   65.689027] EIP: 0060:[<00000000>] EFLAGS: 00010082 CPU: 1
[   65.689027] EIP is at 0x0
[   65.689027] EAX: 00000000 EBX: f66cd780 ECX: c019a64a EDX: f66cd780
[   65.689027] ESI: 00000286 EDI: f66cd780 EBP: f630be2c ESP: f630be24
[   65.689027]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[   65.689027] Process cat (pid: 2969, ti=f630a000 task=f66cd780 task.ti=f630a000)
[   65.689027] Stack:
[   65.689027]  00000012 f630bd54 f630be7c c012c853 00000000 c0133cc9 f66cda54 f630be5c
[   65.689027]  f630be68 f66cda54 f66cd88c f66cd878 f7070000 00000001 f630be90 c0135dbc
[   65.689027]  f614a614 f630be68 f630be68 f65ba200 00000002 f630bf10 f630be90 c012cad6
[   65.689027] Call Trace:
[   65.689027]  [<c012c853>] ? do_exit+0x603/0x850
[   65.689027]  [<c0133cc9>] ? next_signal+0x9/0x40
[   65.689027]  [<c0135dbc>] ? dequeue_signal+0x8c/0x180
[   65.689027]  [<c012cad6>] ? do_group_exit+0x36/0x90
[   65.689027]  [<c013709c>] ? get_signal_to_deliver+0x20c/0x390
[   65.689027]  [<c0102b69>] ? do_notify_resume+0x99/0x8b0
[   65.689027]  [<c02e6d1a>] ? tty_ldisc_deref+0x5a/0x80
[   65.689027]  [<c014db9b>] ? trace_hardirqs_on+0xb/0x10
[   65.689027]  [<c02e6d1a>] ? tty_ldisc_deref+0x5a/0x80
[   65.689027]  [<c02e39b0>] ? n_tty_write+0x0/0x340
[   65.689027]  [<c02e1812>] ? redirected_tty_write+0x82/0x90
[   65.689027]  [<c019ee99>] ? vfs_write+0x99/0xd0
[   65.689027]  [<c02e1790>] ? redirected_tty_write+0x0/0x90
[   65.689027]  [<c019f342>] ? sys_write+0x42/0x70
[   65.689027]  [<c01035ca>] ? work_notifysig+0x13/0x19
[   65.689027] Code:  Bad EIP value.
[   65.689027] EIP: [<00000000>] 0x0 SS:ESP 0068:f630be24

This is because on do_exit(), kfree is called to free the return addresses stack
but kfree is traced and stored its return address in this stack.
This patch fixes it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 17:39:03 +01:00
Frederic Weisbecker
f201ae2356 tracing/function-return-tracer: store return stack into task_struct and allocate it dynamically
Impact: use deeper function tracing depth safely

Some tests showed that function return tracing needed a more deeper depth
of function calls. But it could be unsafe to store these return addresses
to the stack.

So these arrays will now be allocated dynamically into task_struct of current
only when the tracer is activated.

Typical scheme when tracer is activated:
- allocate a return stack for each task in global list.
- fork: allocate the return stack for the newly created task
- exit: free return stack of current
- idle init: same as fork

I chose a default depth of 50. I don't have overruns anymore.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-23 09:17:26 +01:00
Ingo Molnar
3f8e402f34 Merge branches 'tracing/branch-tracer', 'tracing/ftrace', 'tracing/function-return-tracer', 'tracing/tracepoints' and 'tracing/urgent' into tracing/core 2008-11-17 09:36:22 +01:00
walimis
5821e1b74f function tracing: fix wrong pos computing when read buffer has been fulfilled
Impact: make output of available_filter_functions complete

phenomenon:

The first value of dyn_ftrace_total_info is not equal with
`cat available_filter_functions | wc -l`, but they should be equal.

root cause:

When printing functions with seq_printf in t_show, if the read buffer
is just overflowed by current function record, then this function
won't be printed to user space through read buffer, it will
just be dropped. So we can't see this function printing.

So, every time the last function to fill the read buffer, if overflowed,
will be dropped.

This also applies to set_ftrace_filter if set_ftrace_filter has
more bytes than read buffer.

fix:

Through checking return value of seq_printf, if less than 0, we know
this function doesn't be printed. Then we decrease position to force
this function to be printed next time, in next read buffer.

Another little fix is to show correct allocating pages count.

Signed-off-by: walimis <walimisdev@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 08:32:05 +01:00
Frederic Weisbecker
e7d3737ea1 tracing/function-return-tracer: support for dynamic ftrace on function return tracer
This patch adds the support for dynamic tracing on the function return tracer.
The whole difference with normal dynamic function tracing is that we don't need
to hook on a particular callback. The only pro that we want is to nop or set
dynamically the calls to ftrace_caller (which is ftrace_return_caller here).

Some security checks ensure that we are not trying to launch dynamic tracing for
return tracing while normal function tracing is already running.

An example of trace with getnstimeofday set as a filter:

ktime_get_ts+0x22/0x50 -> getnstimeofday (2283 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1396 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1825 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1426 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1464 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1524 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1434 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1464 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1502 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1404 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1397 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1051 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1314 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1344 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1163 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1390 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1374 ns)

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 07:57:38 +01:00
Steven Rostedt
ee02a2e5c8 ftrace: make filtered functions effective on setting
Impact: set filtered functions at time the filter is set

It can be confusing when the set_filter_functions is set (or cleared)
and the functions being recorded by the dynamic tracer does not
match.

This patch causes the code to be updated if the function tracer is
enabled and the filter is changed.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 07:37:46 +01:00
Steven Rostedt
982c350b9e ftrace: fix dyn ftrace filter
Impact: correct implementation of dyn ftrace filter

The old decisions made by the filter algorithm was complex and incorrect.
This lead to inconsistent enabling or disabling of functions when
the filter was used.

This patch simplifies that code and in doing so, corrects the usage
of the filters.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 07:37:17 +01:00
Steven Rostedt
20e5227e9f ftrace: allow NULL pointers in mcount_loc
Impact: make ftrace_convert_nops() more permissive

Due to the way different architecture linkers combine the data sections
of the mcount_loc (the section that lists all the locations that
call mcount), there may be zeros added in that section. This is usually
due to strange alignments that the linker performs, that pads in zeros.

This patch makes the conversion code to nops skip any pointer in
the mcount_loc section that is NULL.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 07:36:42 +01:00
Steven Rostedt
31e889098a ftrace: pass module struct to arch dynamic ftrace functions
Impact: allow archs more flexibility on dynamic ftrace implementations

Dynamic ftrace has largly been developed on x86. Since x86 does not
have the same limitations as other architectures, the ftrace interaction
between the generic code and the architecture specific code was not
flexible enough to handle some of the issues that other architectures
have.

Most notably, module trampolines. Due to the limited branch distance
that archs make in calling kernel core code from modules, the module
load code must create a trampoline to jump to what will make the
larger jump into core kernel code.

The problem arises when this happens to a call to mcount. Ftrace checks
all code before modifying it and makes sure the current code is what
it expects. Right now, there is not enough information to handle modifying
module trampolines.

This patch changes the API between generic dynamic ftrace code and
the arch dependent code. There is now two functions for modifying code:

  ftrace_make_nop(mod, rec, addr) - convert the code at rec->ip into
       a nop, where the original text is calling addr. (mod is the
       module struct if called by module init)

  ftrace_make_caller(rec, addr) - convert the code rec->ip that should
       be a nop into a caller to addr.

The record "rec" now has a new field called "arch" where the architecture
can add any special attributes to each call site record.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 07:36:02 +01:00
Steven Rostedt
918c115410 ftrace: do not process freed records
Impact: keep from converting freed records

When the tracer is started or stopped, it converts all code pointed
to by the saved records into callers to ftrace or nops. When modules
are unloaded, their records are freed, but they still exist within
the record pages.

This patch changes the code to skip over freed records.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 07:30:17 +01:00
Steven Rostedt
b17e8a37a1 ftrace: disable ftrace on anomalies in trace start and stop
Impact: robust feature to disable ftrace on start or stop tracing on error

Currently only the initial conversion to nops will disable ftrace
on an anomaly. But if an anomaly happens on start or stopping of the
tracer, it will silently fail.

This patch adds a check there too, to disable ftrace and warn if the
conversion fails.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 07:30:07 +01:00
Steven Rostedt
f3c7ac40a9 ftrace: remove condition from ftrace_record_ip
Impact: let module functions be recorded when dyn ftrace not enabled

When dynamic ftrace had a daemon and a hash to record the locations
of mcount callers at run time, the recording needed to stop when
ftrace was disabled. But now that the recording is done at compile time
and the ftrace_record_ip is only called at boot up and when a module
is loaded, we no longer need to check if ftrace_enabled is set.
In fact, this breaks module load if it is not set because we skip
over module functions.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 07:29:53 +01:00
walimis
b3535c6390 ftrace: remove unnecessary if condition of __unregister_ftrace_function
Because it has goto out before ftrace_list == &ftrace_list_end,
that's to say, we never meet this condition.

Signed-off-by: walimis <walimisdev@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-13 19:36:30 +01:00
Ingo Molnar
60a011c736 Merge branch 'tracing/function-return-tracer' into tracing/fastboot 2008-11-12 10:17:09 +01:00
Ingo Molnar
d06bbd6695 Merge branches 'tracing/ftrace' and 'tracing/urgent' into tracing/core
Conflicts:
	kernel/trace/ring_buffer.c
2008-11-12 10:11:37 +01:00
Steven Rostedt
a358324466 ring-buffer: buffer record on/off switch
Impact: enable/disable ring buffer recording API added

Several kernel developers have requested that there be a way to stop
recording into the ring buffers with a simple switch that can also
be enabled from userspace. This patch addes a new kernel API to the
ring buffers called:

 tracing_on()
 tracing_off()

When tracing_off() is called, all ring buffers will not be able to record
into their buffers.

tracing_on() will enable the ring buffers again.

These two act like an on/off switch. That is, there is no counting of the
number of times tracing_off or tracing_on has been called.

A new file is added to the debugfs/tracing directory called

  tracing_on

This allows for userspace applications to also flip the switch.

  echo 0 > debugfs/tracing/tracing_on

disables the tracing.

  echo 1 > /debugfs/tracing/tracing_on

enables it.

Note, this does not disable or enable any tracers. It only sets or clears
a flag that needs to be set in order for the ring buffers to write to
their buffers. It is a global flag, and affects all ring buffers.

The buffers start out with tracing_on enabled.

There are now three flags that control recording into the buffers:

 tracing_on: which affects all ring buffer tracers.

 buffer->record_disabled: which affects an allocated buffer, which may be set
     if an anomaly is detected, and tracing is disabled.

 cpu_buffer->record_disabled: which is set by tracing_stop() or if an
     anomaly is detected. tracing_start can not reenable this if
     an anomaly occurred.

The userspace debugfs/tracing/tracing_enabled is implemented with
tracing_stop() but the user space code can not enable it if the kernel
called tracing_stop().

Userspace can enable the tracing_on even if the kernel disabled it.
It is just a switch used to stop tracing if a condition was hit.
tracing_on is not for protecting critical areas in the kernel nor is
it for stopping tracing if an anomaly occurred. This is because userspace
can reenable it at any time.

Side effect: With this patch, I discovered a dead variable in ftrace.c
  called tracing_on. This patch removes it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2008-11-11 15:02:04 -05:00
Frederic Weisbecker
15e6cb3673 tracing: add a tracer to catch execution time of kernel functions
Impact: add new tracing plugin which can trace full (entry+exit) function calls

This tracer uses the low level function return ftrace plugin to
measure the execution time of the kernel functions.

The first field is the caller of the function, the second is the
measured function, and the last one is the execution time in
nanoseconds.

- v3:

- HAVE_FUNCTION_RET_TRACER have been added. Each arch that support ftrace return
  should enable it.
- ftrace_return_stub becomes ftrace_stub.
- CONFIG_FUNCTION_RET_TRACER depends now on CONFIG_FUNCTION_TRACER
- Return traces printing can be used for other tracers on trace.c
- Adapt to the new tracing API (no more ctrl_update callback)
- Correct the check of "disabled" during insertion.
- Minor changes...

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 10:29:12 +01:00
Steven Rostedt
0183fb1c94 ftrace: fix set_ftrace_filter
Impact: fix of output of set_ftrace_filter

Commit ftrace: do not show freed records in available_filter_functions

Removed a bit too much from the set_ftrace_filter code, where we now see
all functions in the set_ftrace_filter file even when we set a filter.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08 09:51:02 +01:00
Steven Rostedt
60a7ecf426 ftrace: add quick function trace stop
Impact: quick start and stop of function tracer

This patch adds a way to disable the function tracer quickly without
the need to run kstop_machine. It adds a new variable called
function_trace_stop which will stop the calls to functions from mcount
when set.  This is just an on/off switch and does not handle recursion
like preempt_disable().

It's main purpose is to help other tracers/debuggers start and stop tracing
fuctions without the need to call kstop_machine.

The config option HAVE_FUNCTION_TRACE_MCOUNT_TEST is added for archs
that implement the testing of the function_trace_stop in the mcount
arch dependent code. Otherwise, the test is done in the C code.

x86 is the only arch at the moment that supports this.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06 07:50:51 +01:00
Frederic Weisbecker
0b6e4d56bf ftrace: perform an initialization for ftrace to enable it
Impact: corrects a bug which made the non-dyn function tracer not functional

With latest git, the non-dynamic function tracer didn't get any trace.

The problem was the fact that ftrace_enabled wasn't initialized to 1
because ftrace hasn't any init function when DYNAMIC_FTRACE is disabled.

So when a tracer tries to register an ftrace_ops struct,
__register_ftrace_function failed to set the hook.

This patch corrects it by setting an init function to initialize
ftrace during the boot.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28 19:15:58 +01:00
Ingo Molnar
f17845e5d9 ftrace: warning in kernel/trace/ftrace.c
this warning:

  kernel/trace/ftrace.c:189: warning: ‘frozen_record_count’ defined but not used

triggers because frozen_record_count is only used in the KCONFIG_MARKERS
case. Move the variable it there.

Alas, this frozen-record facility seems to have little use. The
frozen_record_count variable is not used by anything, nor the flags.

So this section might need a bit of dead-code-removal care as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-24 12:52:44 +02:00