This patch adds readdir plus support to the cache array.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we're going through the loop in nfs_readdir() more than once, we usually
do not want to restart searching from the beginning of the pages cache.
We only want to do that if the previous search failed...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds the readdir cache array and functions to retreive the array
stored on a cache page, clear the array by freeing allocated memory, add an
entry to the array, and search the array for a given cookie.
It then modifies readdir to make use of the new cache array.
With the new cache array method, we no longer need some of this code.
Finally, nfs_llseek_dir() will set file->f_pos to a value greater than 0 and
desc->dir_cookie to zero. When we see this, readdir needs to find the file
at position file->f_pos from the start of the directory.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If nfs_intent_set_file() returns an error, we usually want to pass that
back up the stack.
Also ensure that nfs_open_revalidate() returns '1' on success.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
...since that's where most of the sillyrenaming code lives. A comment
block is added to the beginning as well to clarify how sillyrenaming
works. Also, make nfs_async_unlink static as nfs_sillyrename is the only
caller.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove all remaining references to the struct nameidata from the low level
NFS layers. Again pass down a partially initialised struct nfs_open_context
when we want to do atomic open+create.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove references to 'struct nameidata' from the low-level open_revalidate
code, and replace them with a struct nfs_open_context which will be
correctly initialised upon success.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Start moving the 'struct nameidata' dependent code out of the lower level
NFS code in preparation for the removal of open intents.
Instead of the struct nameidata, we pass down a partially initialised
struct nfs_open_context that will be fully initialised by the atomic open
upon success.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To obey NFS cache semantics, the client must verify the cached
attributes when a file is opened. In most cases this is done by a call to
d_validate as one of the last steps in path_walk.
However for the root of a filesystem, d_validate is only ever called
on the mounted-on filesystem (except when the path ends '.' or '..').
So NFS has no chance to validate the attributes.
So, in nfs_opendir, we revalidate the attributes if the opened
directory is the mountpoint. This may cause double-validation for "."
and ".." lookups, but that is better than missing regular /path/name
lookups completely.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'nfs-for-2.6.36' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (42 commits)
NFS: NFSv4.1 is no longer a "developer only" feature
NFS: NFS_V4 is no longer an EXPERIMENTAL feature
NFS: Fix /proc/mount for legacy binary interface
NFS: Fix the locking in nfs4_callback_getattr
SUNRPC: Defer deleting the security context until gss_do_free_ctx()
SUNRPC: prevent task_cleanup running on freed xprt
SUNRPC: Reduce asynchronous RPC task stack usage
SUNRPC: Move the bound cred to struct rpc_rqst
SUNRPC: Clean up of rpc_bindcred()
SUNRPC: Move remaining RPC client related task initialisation into clnt.c
SUNRPC: Ensure that rpc_exit() always wakes up a sleeping task
SUNRPC: Make the credential cache hashtable size configurable
SUNRPC: Store the hashtable size in struct rpc_cred_cache
NFS: Ensure the AUTH_UNIX credcache is allocated dynamically
NFS: Fix the NFS users of rpc_restart_call()
SUNRPC: The function rpc_restart_call() should return success/failure
NFSv4: Get rid of the bogus RPC_ASSASSINATED(task) checks
NFSv4: Clean up the process of renewing the NFSv4 lease
NFSv4.1: Handle NFS4ERR_DELAY on SEQUENCE correctly
NFS: nfs_rename() should not have to flush out writebacks
...
We don't really support nfs servers that invalidate the file handle after a
rename, so precautions such as flushing out dirty data before renaming the
file are superfluous.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently MAY_ACCESS means that filesystems must check the permissions
right then and not rely on cached results or the results of future
operations on the object. This can be because of a call to sys_access() or
because of a call to chdir() which needs to check search without relying on
any future operations inside that dir. I plan to use MAY_ACCESS for other
purposes in the security system, so I split the MAY_ACCESS and the
MAY_CHDIR cases.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
The current shrinker implementation requires the registered callback
to have global state to work from. This makes it difficult to shrink
caches that are not global (e.g. per-filesystem caches). Pass the shrinker
structure to the callback so that users can embed the shrinker structure
in the context the shrinker needs to operate on and get back to it in the
callback via container_of().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Commit 9c7e7e2337 (NFS: Don't call iput() in
nfs_access_cache_shrinker) unintentionally removed the spin unlock for the
inode->i_lock.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
iput() can potentially attempt to allocate memory, so we should avoid
calling it in a memory shrinker. Instead, rely on the fact that iput() will
call nfs_access_zap_cache().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Both iput() and put_rpccred() might allocate memory under certain
circumstances, so make sure that we don't recurse and deadlock...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
nfs: fix memory leak in nfs_get_sb with CONFIG_NFS_V4
nfs: fix some issues in nfs41_proc_reclaim_complete()
NFS: Ensure that nfs_wb_page() waits for Pg_writeback to clear
NFS: Fix an unstable write data integrity race
nfs: testing for null instead of ERR_PTR()
NFS: rsize and wsize settings ignored on v4 mounts
NFSv4: Don't attempt an atomic open if the file is a mountpoint
SUNRPC: Fix a bug in rpcauth_prune_expired
If dentry found stale happens to be a root of disconnected tree, we
can't d_drop() it; its d_hash is actually part of s_anon and d_drop()
would simply hide it from shrink_dcache_for_umount(), leading to
all sorts of fun, including busy inodes on umount and oopsen after
that.
Bug had been there since at least 2006 (commit c636eb already has it),
so it's definitely -stable fodder.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the NFS_INO_REVAL_FORCED flag is set, that means that we don't yet have
an up to date attribute cache. Even if we hold a delegation, we must
put a GETATTR on the wire.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Recent change is missing to update "rehash". With that change, it will
become the cause of adding dentry to hash twice.
This explains the reason of Oops (dereference the freed dentry in
__d_lookup()) on my machine.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: Marvin <marvin24@gmx.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The d_instantiate(new_dentry, NULL) is superfluous, the dentry is
already negative. Rehashing this dummy dentry isn't needed either,
d_move() works fine on an unhashed target.
The re-checking for busy after a failed nfs_sillyrename() is bogus
too: new_dentry->d_count < 2 would be a bug here.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move unhashing the target to after the check for existence and being a
non-directory.
If renaming a directory then the VFS already unhashes the target if it
is not busy. If it's busy then acquiring more references during the
rename makes no difference.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Comments are wrong or out of date. In particular d_drop() doesn't
free the inode it just unhashes the dentry. And if target is a
directory then it is not checked for being busy.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
VFS already checks if both source and target are directories.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We just had a case in which a buggy server occasionally returns the wrong
attributes during an OPEN call. While the client does catch this sort of
condition in nfs4_open_done(), and causes the nfs4_atomic_open() to return
-EISDIR, the logic in nfs_atomic_lookup() is broken, since it causes a
fallback to an ordinary lookup instead of just returning the error.
When the buggy server then returns a regular file for the fallback lookup,
the VFS allows the open, and bad things start to happen, since the open
file doesn't have any associated NFSv4 state.
The fix is firstly to return the EISDIR/ENOTDIR errors immediately, and
secondly to ensure that we are always careful when dereferencing the
nfs_open_context state pointer.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The problem is that permission checking is skipped if atomic open is
possible, but when exec opens a file, it just opens it O_READONLY which
means EXEC permission will not be checked at that time.
This problem is observed by the following sequence (executed as root):
mount -t nfs4 server:/ /mnt4
echo "ls" >/mnt4/foo
chmod 744 /mnt4/foo
su guest -c "mnt4/foo"
Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Tested-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NFS appears to be returning an unnecessary "delete" notification when
we're doing an atomic rename. See
http://bugzilla.gnome.org/show_bug.cgi?id=575684
The fix is to get rid of the redundant call to d_delete().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hi Trond,
I have been looking at a bugreport where trying to open applications on KDE
on a NFS mounted home fails temporarily. There have been multiple reports on
different kernel versions pointing to this common issue:
http://bugzilla.kernel.org/show_bug.cgi?id=12557https://bugs.launchpad.net/ubuntu/+source/linux/+bug/269954http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508866.html
This issue can be reproducible consistently by doing this on a NFS mounted
home (KDE):
1. Open 2 xterm sessions
2. From one of the xterm session, do "ssh -X <remote host>"
3. "stat ~/.Xauthority" on the remote SSH session
4. Close the two xterm sessions
5. On the server do a "stat ~/.Xauthority"
6. Now on the client, try to open xterm
This will fail.
Even if the filehandle had become stale, the NFS client should invalidate
the cache/inode and should repeat LOOKUP. Looking at the packet capture when
the failure occurs shows that there were two subsequent ACCESS() calls with
the same filehandle and both fails with -ESTALE error.
I have tested the fix below. Now the client issue a LOOKUP after the
ACCESS() call fails with -ESTALE. If all this makes sense to you, can you
consider this for inclusion?
Thanks,
If the server returns an -ESTALE error due to stale filehandle in response to
an ACCESS() call, we need to invalidate the cache and inode so that LOOKUP()
can be retried. Without this change, the nfs client retries ACCESS() with the
same filehandle, fails again and could lead to temporary failure of
applications running on nfs mounted home.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hi.
I've been looking at a bugzilla which describes a problem where
a customer was advised to use either the "noac" or "actimeo=0"
mount options to solve a consistency problem that they were
seeing in the file attributes. It turned out that this solution
did not work reliably for them because sometimes, the local
attribute cache was believed to be valid and not timed out.
(With an attribute cache timeout of 0, the cache should always
appear to be timed out.)
In looking at this situation, it appears to me that the problem
is that the attribute cache timeout code has an off-by-one
error in it. It is assuming that the cache is valid in the
region, [read_cache_jiffies, read_cache_jiffies + attrtimeo]. The
cache should be considered valid only in the region,
[read_cache_jiffies, read_cache_jiffies + attrtimeo). With this
change, the options, "noac" and "actimeo=0", work as originally
expected.
This problem was previously addressed by special casing the
attrtimeo == 0 case. However, since the problem is only an off-
by-one error, the cleaner solution is address the off-by-one
error and thus, not require the special case.
Thanx...
ps
Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This ensures that we don't have to look up the dentry again after we return
the delegation if we know that the directory didn't change.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For execute permission on a regular files we need to check if file has
any execute bits at all, regardless of capabilites.
This check is normally performed by generic_permission() but was also
added to the case when the filesystem defines its own ->permission()
method. In the latter case the filesystem should be responsible for
performing this check.
Move the check from inode_permission() inside filesystems which are
not calling generic_permission().
Create a helper function execute_ok() that returns true if the inode
is a directory or if any execute bits are present in i_mode.
Also fix up the following code:
- coda control file is never executable
- sysctl files are never executable
- hfs_permission seems broken on MAY_EXEC, remove
- hfsplus_permission is eqivalent to generic_permission(), remove
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
New flag: LOOKUP_EXCL. Set before doing the final step of pathname
resolution on the paths that have LOOKUP_CREATE and O_EXCL.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split the LRU lists in two, one set for pages that are backed by real file
systems ("file") and one for pages that are backed by memory and swap
("anon"). The latter includes tmpfs.
The advantage of doing this is that the VM will not have to scan over lots
of anonymous pages (which we generally do not want to swap out), just to
find the page cache pages that it should evict.
This patch has the infrastructure and a basic policy to balance how much
we scan the anon lists and how much we scan the file lists. The big
policy changes are in separate patches.
[lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset]
[kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru]
[kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page]
[hugh@veritas.com: memcg swapbacked pages active]
[hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED]
[akpm@linux-foundation.org: fix /proc/vmstat units]
[nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration]
[kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo]
[kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The cache_change_attribute is used to decide whether or not a directory has
changed, in which case we may need to look it up again. Again, the use of
'jiffies' leads to an issue of resolution.
Once again, the fix is to change nfs_inode->cache_change_attribute, and
just make it a simple counter.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It appears that 'jiffies' timestamps do not have high enough resolution for
nfs_inode_attrs_need_update(). One problem is that a GETATTR can be
launched within < 1 jiffy of the last operation that updated the attribute.
Another problem is that RPC calls can take < 1 jiffy to execute.
We can fix this by switching the variables to use a simple global counter
that gets incremented every time we start another GETATTR call.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add the flag NFS_MOUNT_LOOKUP_CACHE_NONEG to turn off the caching of
negative dentries. In reality what we do is to force
nfs_lookup_revalidate() to always discard negative dentries.
Add the flag NFS_MOUNT_LOOKUP_CACHE_NONE for enforcing stricter
revalidation of dentries. It forces the revalidate code to always do a
lookup instead of just checking the cached mtime of the parent directory.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* kill nameidata * argument; map the 3 bits in ->flags anybody cares
about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
MAY_... found in mask.
The obvious next target in that direction is permission(9)
folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Page accesses are serialised using the page locks, whereas all attribute
updates are serialised using the inode->i_lock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Page cache accesses are serialised using page locks, whereas attribute
updates are serialised using inode->i_lock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Attribute updates are safe, and dentry operations are protected using VFS
level locks. Defer removing the BKL from sillyrename until a separate
patch.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All dentry-related operations are already BKL-safe, since they are
protected by the VFS locking. No extra locks should be needed in the NFS
code.
In the case of nfs_revalidate_inode(), we're only doing an attribute
update (protected by the inode->i_lock).
In the case of nfs_lookup(), we're instantiating a new dentry, so there
should be no contention possible until after we call d_materialise_unique.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_instantiate() does not require the BKL, neither do the attribute
updates or the RPC code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All the NFSv4 stateful operations are already protected by other locks (in
particular by the rpc_sequence locks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: some fops use NFSDBG_FILE, some use NFSDBG_VFS. Let's use
NFSDBG_FILE for all fops, and consistently report file names instead
of inode numbers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Report the same debugging info and count function calls the
same for files and directories in nfs_opendir() and nfs_file_open().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Report the same debugging info in nfs_llseek_dir() and
nfs_llseek_file().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Report the same debugging info, count function calls the same,
and use similar function naming in nfs_fsync_dir() and nfs_fsync().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
invalidate_inode_pages2_range() takes page offset arguments, not byte
ranges.
Another thought is that individual pages might perhaps get evicted by VM
pressure, in which case we might perhaps want to re-read not only the
evicted page, but all subsequent pages too (in case the server returns
more/less data per page so that the alignment of the next entry
changes). We should therefore remove the condition that we only do this on
page->index==0.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we depend on the inodes for writeability, we will not catch the r/o mounts
when implemented.
This patches uses __mnt_want_write(). It does not guarantee that the mount
will stay writeable after the check. But, this is OK for one of the checks
because it is just for a printk().
The other two are probably unnecessary and duplicate existing checks in the
VFS. This won't make them better checks than before, but it will make them
detect r/o mounts.
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The NFSv4 protocol allows clients to negotiate security protocols on the
fly in the case where an administrator on the server changes the export
settings and/or in the case where we may have a filesystem migration event.
Instead of having the NFS client code cache credentials that are tied to a
particular AUTH method it is therefore preferable to have a generic credential
that can be converted into whatever AUTH is in use by the RPC client when
the read/write/sillyrename/... is put on the wire.
We do this by means of the new "generic" credential, which basically just
caches the minimal information that is needed to look up an RPCSEC_GSS,
AUTH_SYS, or AUTH_NULL credential.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As long as the directory contents haven't changed, we should just let the
path walk proceed to cross the mountpoint. Apart from being an optimisation
in the case of 'nohide' mountpoint traversals, it also fixes an issue with
referrals: referral inodes don't have valid filehandles, so calling
nfs_revalidate_inode() on them is a bug.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The error field in nfs_readdir_descriptor_t is never used outside of the
function in which it is set. Remove the field and change the place that
does use it to use an existing local variable.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Otherwise, there is a potential deadlock if the last dput() from an NFSv4
close() or other asynchronous operation leads to nfs_clear_inode calling
the synchronous delegreturn.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server returns an ENOENT error, we still need to do a d_delete() in
order to ensure that the dentry is deleted.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that readdir revalidates its data cache after blocking on
sillyrename.
Also fix a typo in nfs_do_call_unlink(): swap the ^= for an |=. The result
is the same, since we've already checked that the flag is unset, but it
makes the code more readable.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Every file should include the headers containing the prototypes for its global
functions (in this case nfs_access_cache_shrinker()).
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
lookup() and sillyrename() can race one another because the sillyrename()
completion cannot take the parent directory's inode->i_mutex since the
latter may be held by whoever is calling dput().
We therefore have little option but to add extra locking to ensure that
nfs_lookup() and nfs_atomic_open() do not race with the sillyrename
completion.
If somebody has looked up the sillyrenamed file in the meantime, we just
transfer the sillydelete information to the new dentry.
Please refer to the bug-report at
http://bugzilla.linux-nfs.org/show_bug.cgi?id=150
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This boot parameter will allow legacy 32-bit applications which call stat()
to continue to function even if the NFSv3/v4 server uses 64-bit inode
numbers.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
- NFS_READTIME, NFS_CHANGE_ATTR are completely unused.
- Inline the few remaining uses of NFS_ATTRTIMEO, and remove.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't need to call nfs_revalidate_inode() on the directory if we already
know that the verifiers don't match.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The lower level routines in fs/nfs/proc.c, fs/nfs/nfs3proc.c and
fs/nfs/nfs4proc.c should already be dealing with the revalidation issues.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The fact that we're in the process of modifying the inode does not mean
that we should not invalidate the attribute and data caches. The defensive
thing is to always invalidate when we're confronted with inode
mtime/ctime or change_attribute updates that we do not immediately
recognise.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the ->lookup() call causes the directory verifier to change, then there
is still no need to use the old verifier, since our dentry has been
verified.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't want to leave an unverified hashed negative dentry if the
exclusive create fails to complete.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
That will also allow us to remove the calls in mknod and mkdir.
In addition it will ensure that symlinks set it correctly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't care about whether or not some other process on our client is
changing the directory while we're in nfs_lookup_revalidate(), because the
dcache will take care of ensuring local atomicity.
We can therefore remove the test for nfs_caches_unstable().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv3 will correctly update atime on a readdir call, so there is no need to
set the NFS_INO_INVALID_ATIME flag unless the call to nfs_refresh_inode()
fails.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't need to force a dentry lookup just because we're making changes to
the directory.
Don't update nfsi->cache_change_attribute in nfs_end_data_update: that
overrides the NFSv3/v4 weak consistency checking that tells us our update
was the only one, and that tells us the dcache is still valid.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, _nfs4_do_access() is just a copy of nfs_do_access() with added
conversion of the open flags into an access mask. This patch merges the
duplicate functionality.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_set_verifier() and nfs_refresh_verifier() do exactly the same thing, so
replace one with the other.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The nfs_renew_times() function plants the current time in jiffies in
dentry->d_time. But a call to nfs_renew_times() is always followed by
another call that overwrites dentry->d_time. Get rid of the
nfs_renew_times() calls.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Negative dentries need to be reverified after an asynchronous unlink.
Quoth Trond:
"Unfortunately I don't think that we can avoid revalidating the
resulting negative dentry since the UNLINK call is asynchronous,
and so the new verifier on the directory will only be known a
posteriori."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I would like to discuss the idea that the current checks for attribute
timeout using time_after are inadequate for 32bit architectures, since
time_after works correctly only when the two timestamps being compared
are within 2^31 jiffies of each other. The signed overflow caused by
comparing values more than 2^31 jiffies apart will flip the result,
causing incorrect assumptions of validity.
2^31 jiffies is a fairly large period of time (~25 days) when compared
to the lifetime of most kernel data structures, but for long lived NFS
mounts that can sit idle for months (think that for some reason autofs
cannot be used), it is easy to compare inode attribute timestamps with
very disparate or even bogus values (as in when jiffies have wrapped
many times, where the comparison doesn't even make sense).
Currently the code tests for attribute timeout by simply adding the
desired amount of jiffies to the stored timestamp and comparing that
with the current timestamp of obtained attribute data with time_after.
This is incorrect, as it returns true for the desired timeout period
and another full 2^31 range of jiffies.
In testing with artificial jumps (several small jumps, not one big
crank) of the jiffies I was able to reproduce a problem found in a
server with very long lived NFS mounts, where attributes would not be
refreshed even after touching files and directories in the server:
Initial uptime:
03:42:01 up 6 min, 0 users, load average: 0.01, 0.12, 0.07
NFS volume is mounted and time is advanced:
03:38:09 up 25 days, 2 min, 0 users, load average: 1.22, 1.05, 1.08
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Dec 17 03:38 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Nov 22 00:36 /nfs/A/foo/bar
# touch /local/A/foo/bar
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Dec 17 03:47 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Nov 22 00:36 /nfs/A/foo/bar
We can see the local mtime is updated, but the NFS mount still shows
the old value. The patch below makes it work:
Initial setup...
07:11:02 up 25 days, 1 min, 0 users, load average: 0.15, 0.03, 0.04
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:11 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:11 /nfs/A/foo/bar
# touch /local/A/foo/bar
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:14 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:14 /nfs/A/foo/bar
Signed-off-by: Fabio Olive Leite <fleite@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hi.
Attached is a patch to modify the NFS client code to support
64 bit ino's, as appropriate for the system and the NFS
protocol version.
The code basically just expand the NFS interfaces for routines
which handle ino's from using ino_t to u64 and then uses the
fileid in the nfs_inode instead of i_ino in the inode. The
code paths that were updated are in the getattr method and
the readdir methods.
This should be no real change on 64 bit platforms. Since
the ino_t is an unsigned long, it would already be 64 bits
wide.
Thanx...
ps
Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It doesn't look as if the NFS file name limit is being initialised correctly
in the struct nfs_server. Make sure that we limit whatever is being set in
nfs_probe_fsinfo() and nfs_init_server().
Also ensure that readdirplus and nfs4_path_walk respect our file name
limits.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a couple of bugs:
- Don't rely on the parent dentry still being valid when the call completes.
Fixes a race with shrink_dcache_for_umount_subtree()
- Don't remove the file if the filehandle has been labelled as stale.
Fix a couple of inefficiencies
- Remove the global list of sillyrenamed files. Instead we can cache the
sillyrename information in the dentry->d_fsdata
- Move common code from unlink_setup/unlink_done into fs/nfs/unlink.c
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_symlink() allocates a GFP_KERNEL page for the pagecache. Most
pagecache pages are allocated using GFP_HIGHUSER, and there's no reason
not to do that in nfs_symlink() as well.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
We don't need to revalidate the fsid on the root directory. It suffices to
revalidate it on the current directory.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A number of race conditions may currently ensue if the user presses ^C
and then unmounts the partition while an asynchronous open() is in
progress.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.
This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
getting them indirectly
Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
they don't need sched.h
b) sched.h stops being dependency for significant number of files:
on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
after patch it's only 3744 (-8.3%).
Cross-compile tested on
all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
alpha alpha-up
arm
i386 i386-up i386-defconfig i386-allnoconfig
ia64 ia64-up
m68k
mips
parisc parisc-up
powerpc powerpc-up
s390 s390-up
sparc sparc-up
sparc64 sparc64-up
um-x86_64
x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig
as well as my two usual configs.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fs/nfs/dir.c:610:8: warning: symbol 'nfs_llseek_dir' was not declared.
Should it be static?
- fs/nfs/dir.c:636:5: warning: symbol 'nfs_fsync_dir' was not declared.
Should it be static?
- fs/nfs/write.c:925:19: warning: symbol 'req' shadows an earlier one
- fs/nfs/write.c:61:6: warning: symbol 'nfs_commit_rcu_free' was not
declared. Should it be static?
- fs/nfs/nfs4proc.c:793:5: warning: symbol 'nfs4_recover_expired_lease'
was not declared. Should it be static?
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The check for nfs_attribute_timeout(dir) in nfs_check_verifier is
redundant: nfs_lookup_revalidate() will already call nfs_revalidate_inode()
on the parent dir when necessary.
The only case where this is not done is the case of a negative dentry. Fix
this case by moving up the revalidation code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
dentry verifiers are always set to the parent directory's
cache_change_attribute. There is no reason to be testing for anything other
than equality when we're trying to find out if the dentry has been checked
since the last time the directory was modified.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure pages are uptodate after returning from read_cache_page, which allows
us to cut out most of the filesystem-internal PageUptodate calls.
I didn't have a great look down the call chains, but this appears to fixes 7
possible use-before uptodate in hfs, 2 in hfsplus, 1 in jfs, a few in
ecryptfs, 1 in jffs2, and a possible cleared data overwritten with readpage in
block2mtd. All depending on whether the filler is async and/or can return
with a !uptodate page.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Try running this script in an NFS mounted directory (Client relatively
recent - 2.6.18 has the problem as does 2.6.20).
------------------------------------------------------
#!/bin/bash
#
# This script will produce the following errormessage from tar:
#
# tar: newdir/innerdir/innerfile: file changed as we read it
# create dirs
rm -rf nfstest
mkdir -p nfstest/dir/innerdir
# create files (should not be empty)
echo "Hello World!" >nfstest/dir/file
echo "Hello World!" >nfstest/dir/innerdir/innerfile
# problem only happens if we sleep before chmod
sleep 1
# change file modes
chmod -R a+r nfstest
# rename dir
mv nfstest/dir nfstest/newdir
# tar it
tar -cf nfstest/nfstest.tar -C nfstest newdir
# restore old dir name
mv nfstest/newdir nfstest/dir
--------------------------------------------------------
What happens:
The 'chmod -R' does a readdir_plus in each directory and the results
get cached in the page cache. It then updates the ctime on each file
by one second. When this happens, the post-op attributes are used to
update the ctime stored on the client to match the value in the kernel.
The 'mv' calls shrink_dcache_parent on the directory tree which
flushes all the dentries (so a new lookup will be required) but
doesn't flush the inodes or pagecache.
The 'tar' does a readdir on each directory, but (in the case of
'innerdir' at least) satisfies it from the pagecache and uses the
READDIRPLUS data to update all the inodes. In the case of
'innerdir/innerfile', the ctime is out of date.
'tar' then calls 'lstat' on innerdir/innerfile getting an old ctime.
It then opens the file (triggering a GETATTR), reads the content, and
then calls fstat to see if anything has changed. It finds that ctime
has changed and so complains.
The problem seems to be that the cache readdirplus info is kept around
for too long.
My patch below discards pagecache data for directories when
dentry_iput is called on them. This effectively removes the symptom
which convinces me that I correctly understand the problem. However
I'm not convinced that is a proper solution, as there could easily be
other races that trigger the same problem without being affected by
this 'fix'.
One possibility would be to require that readdirplus pagecache data be
only used *once* to instantiate an inode. Somehow it should then be
invalidated so that if the dentry subsequently disappears, it will
cause a new request to the server to fill in the stat data.
Another possibility is to compare the cache_change_attribute on the
inode with something similar for the readdirplus info and reject the
info from readdirplus if it is too old.
I haven't tried to implement these and would value other opinions
before I do.
Thanks,
NeilBrown
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Don't use uninitialsed value for fattr->time_start in readdirplus results.
The 'fattr' structure filled in by nfs3_decode_direct does not get a
value for ->time_start set.
Thus if an entry is for an inode that we already have in cache,
when nfs_readdir_lookup calls nfs_fhget, it will call nfs_refresh_inode
and may update the inode with out-of-date information.
Directories are read a page at a time, so each page could have a
different timestamp that "should" be used to set the time_start for
the fattr for info in that page. However storing the timestamp per
page is awkward. (We could stick in the first 4 bytes and only read 4092
bytes, but that is a bigger code change than I am interested it).
This patch ignores the readdir_plus attributes if a readdir finds the
information already in cache, and otherwise sets ->time_start to the time
the readdir request was sent to the server.
It might be nice to store - in the directory inode - the time stamp for
the earliest readdir request that is still in the page cache, so that we
don't ignore attribute data that we don't have to. This patch doesn't do
that.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It looks like nfs_setattr() and nfs_rename() also need to test whether the
target is a regular file before calling nfs_wb_all()...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nfs_lookup_revalidate and friends are not serialised, so it is currently
quite possible for the dentry to be revalidated, and then have the
updated verifier replaced with an older value by another process.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the fileid of the cached dentry fails to match that returned by
the readdir call, then we should also d_drop. Try to take into account the
fact that on NFSv4, readdir may return the "mounted_on_fileid" by looking
for submounts.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make sure that nfs_readdir_lookup() handles negative dentries correctly.
If d_lookup() returns a negative dentry, then we need to d_drop() that
since readdir shows that it should be positive.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When a file is being scheduled for deletion by means of the sillyrename
mechanism, it makes sense to start out writeback of the dirty data as
soon as possible in order to ensure that the delete can occur. Examples of
cases where this is an issue include "rm -rf", which will busy-wait until
the file is closed, and the sillyrename completes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prevent the call to invalidate_inode_pages2() from racing with file writes
by taking the inode->i_mutex across the page cache flush and invalidate.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the nfs
client code.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If someone has renamed a directory on the server, triggering the d_move
code in d_materialise_unique(), then we need to invalidate the cached
directory information in the source parent directory.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If the caller tries to instantiate a directory using an inode that already
has a dentry alias, then we attempt to rename the existing dentry instead
of instantiating a new one. Fail with an ELOOP error if the rename would
affect one of our parent directories.
This behaviour is needed in order to avoid issues such as
http://bugzilla.kernel.org/show_bug.cgi?id=7178
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
on-the-wire data is big-endian
[in large part pulled from Alexey's patch]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The original code confused a zero return code from pagevec_add() as success.
Test plan:
None.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If invalidate_inode_pages2() fails, then it should in principle just be
because the current process was signalled. In that case, we just want to
ensure that the inode's page cache remains marked as invalid.
Also add a helper to allow the O_DIRECT code to simply mark the page cache as
invalid once it is finished writing, instead of calling
invalidate_inode_pages2() itself.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some filesystems, instead of simply decrementing i_nlink, simply zero it
during an unlink operation. We need to catch these in addition to the
decrement operations.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a filesystem decrements i_nlink to zero, it means that a write must be
performed in order to drop the inode from the filesystem.
We're shortly going to have keep filesystems from being remounted r/o between
the time that this i_nlink decrement and that write occurs.
So, add a little helper function to do the decrements. We'll tie into it in a
bit to note when i_nlink hits zero.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some file systems want to manually d_move() the dentries involved in a
rename. We can do this by making use of the FS_ODD_RENAME flag if we just
have nfs_rename() unconditionally do the d_move(). While there, we rename
the flag to be more descriptive.
OCFS2 uses this to protect that part of the rename operation with a cluster
lock.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
If the open intents tell us that a given lookup is going to result in a,
exclusive create, we currently optimize away the lookup call itself. The
reason is that the lookup would not be atomic with the create RPC call, so
why do it in the first place?
A problem occurs, however, if the VFS aborts the exclusive create operation
after the lookup, but before the call to create the file/directory: in this
case we will end up with a hashed negative dentry in the dcache that has
never been looked up.
Fix this by only actually hashing the dentry once the create operation has
been successfully completed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that we have a copy of the symlink path in the page cache, we can pass
a struct page down to the XDR routines instead of a string buffer.
Test plan:
Connectathon, all NFS versions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently the NFS client does not cache symlinks it creates. They get
cached only when the NFS client reads them back from the server.
Copy the symlink into the page cache before sending it.
Test plan:
Connectathon, all NFS versions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the LOOKUP or GETATTR in nfs_instantiate fail, nfs_instantiate will do a
d_drop before returning. But some callers already do a d_drop in the case
of an error return. Make certain we do only one d_drop in all error paths.
This issue was introduced because over time, the symlink proc API diverged
slightly from the create/mkdir/mknod proc API. To prevent other coding
mistakes of this type, change the symlink proc API to be more like
create/mkdir/mknod and move the nfs_instantiate call into the symlink proc
routines so it is used in exactly the same way for create, mkdir, mknod,
and symlink.
Test plan:
Connectathon, all versions of NFS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In the early days of NFS, there was no duplicate reply cache on the server.
Thus retransmitted non-idempotent requests often found that the request had
already completed on the server. To avoid passing an unanticipated return
code to unsuspecting applications, NFS clients would often shunt error
codes that implied the request had been retried but already completed.
Thanks to NFS over TCP, duplicate reply caches on the server, and network
performance and reliability improvements, it is safe to remove such checks.
Test plan:
None.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The attached patch makes NFS share superblocks between mounts from the same
server and FSID over the same protocol.
It does this by creating each superblock with a false root and returning the
real root dentry in the vfsmount presented by get_sb(). The root dentry set
starts off as an anonymous dentry if we don't already have the dentry for its
inode, otherwise it simply returns the dentry we already have.
We may thus end up with several trees of dentries in the superblock, and if at
some later point one of anonymous tree roots is discovered by normal filesystem
activity to be located in another tree within the superblock, the anonymous
root is named and materialises attached to the second tree at the appropriate
point.
Why do it this way? Why not pass an extra argument to the mount() syscall to
indicate the subpath and then pathwalk from the server root to the desired
directory? You can't guarantee this will work for two reasons:
(1) The root and intervening nodes may not be accessible to the client.
With NFS2 and NFS3, for instance, mountd is called on the server to get
the filehandle for the tip of a path. mountd won't give us handles for
anything we don't have permission to access, and so we can't set up NFS
inodes for such nodes, and so can't easily set up dentries (we'd have to
have ghost inodes or something).
With this patch we don't actually create dentries until we get handles
from the server that we can use to set up their inodes, and we don't
actually bind them into the tree until we know for sure where they go.
(2) Inaccessible symbolic links.
If we're asked to mount two exports from the server, eg:
mount warthog:/warthog/aaa/xxx /mmm
mount warthog:/warthog/bbb/yyy /nnn
We may not be able to access anything nearer the root than xxx and yyy,
but we may find out later that /mmm/www/yyy, say, is actually the same
directory as the one mounted on /nnn. What we might then find out, for
example, is that /warthog/bbb was actually a symbolic link to
/warthog/aaa/xxx/www, but we can't actually determine that by talking to
the server until /warthog is made available by NFS.
This would lead to having constructed an errneous dentry tree which we
can't easily fix. We can end up with a dentry marked as a directory when
it should actually be a symlink, or we could end up with an apparently
hardlinked directory.
With this patch we need not make assumptions about the type of a dentry
for which we can't retrieve information, nor need we assume we know its
place in the grand scheme of things until we actually see that place.
This patch reduces the possibility of aliasing in the inode and page caches for
inodes that may be accessed by more than one NFS export. It also reduces the
number of superblocks required for NFS where there are many NFS exports being
used from a server (home directory server + autofs for example).
This in turn makes it simpler to do local caching of network filesystems, as it
can then be guaranteed that there won't be links from multiple inodes in
separate superblocks to the same cache file.
Obviously, cache aliasing between different levels of NFS protocol could still
be a problem, but at least that gives us another key to use when indexing the
cache.
This patch makes the following changes:
(1) The server record construction/destruction has been abstracted out into
its own set of functions to make things easier to get right. These have
been moved into fs/nfs/client.c.
All the code in fs/nfs/client.c has to do with the management of
connections to servers, and doesn't touch superblocks in any way; the
remaining code in fs/nfs/super.c has to do with VFS superblock management.
(2) The sequence of events undertaken by NFS mount is now reordered:
(a) A volume representation (struct nfs_server) is allocated.
(b) A server representation (struct nfs_client) is acquired. This may be
allocated or shared, and is keyed on server address, port and NFS
version.
(c) If allocated, the client representation is initialised. The state
member variable of nfs_client is used to prevent a race during
initialisation from two mounts.
(d) For NFS4 a simple pathwalk is performed, walking from FH to FH to find
the root filehandle for the mount (fs/nfs/getroot.c). For NFS2/3 we
are given the root FH in advance.
(e) The volume FSID is probed for on the root FH.
(f) The volume representation is initialised from the FSINFO record
retrieved on the root FH.
(g) sget() is called to acquire a superblock. This may be allocated or
shared, keyed on client pointer and FSID.
(h) If allocated, the superblock is initialised.
(i) If the superblock is shared, then the new nfs_server record is
discarded.
(j) The root dentry for this mount is looked up from the root FH.
(k) The root dentry for this mount is assigned to the vfsmount.
(3) nfs_readdir_lookup() creates dentries for each of the entries readdir()
returns; this function now attaches disconnected trees from alternate
roots that happen to be discovered attached to a directory being read (in
the same way nfs_lookup() is made to do for lookup ops).
The new d_materialise_unique() function is now used to do this, thus
permitting the whole thing to be done under one set of locks, and thus
avoiding any race between mount and lookup operations on the same
directory.
(4) The client management code uses a new debug facility: NFSDBG_CLIENT which
is set by echoing 1024 to /proc/net/sunrpc/nfs_debug.
(5) Clone mounts are now called xdev mounts.
(6) Use the dentry passed to the statfs() op as the handle for retrieving fs
statistics rather than the root dentry of the superblock (which is now a
dummy).
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the rpc_ops from the nfs_server struct to the nfs_client struct as they're
common to all server records of a particular NFS protocol version.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A pinned inode may in theory end up filling memory with cached ACCESS
calls. This patch ensures that the VM may shrink away the cache in these
particular cases.
The shrinker works by iterating through the list of inodes on the global
nfs_access_lru_list, and removing the least recently used access
cache entry until it is done (or until the entire cache is empty).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The current access cache only allows one entry at a time to be cached for each
inode. Add a per-inode red-black tree in order to allow more than one to
be cached at a time.
Should significantly cut down the time spent in path traversal for shared
directories such as ${PATH}, /usr/share, etc.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In the case when compiling via a symlink tree, we want to ensure that the
close-to-open GETATTR call is applied only to the final file, and not to
the symlink.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separate out the function of revalidating the inode metadata, and
revalidating the mapping. The former may be called by lookup(),
and only really needs to check that permissions, ctime, etc haven't changed
whereas the latter needs only done when we want to read data from the page
cache, and may need to sync and then invalidate the mapping.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Local variable res was initialized to 0 - no check needed here.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is a conversion to make the various file_operations structs in fs/
const. Basically a regexp job, with a few manual fixups
The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently it returns NULL, which usually gets interpreted as ENOMEM. In
fact it can mean a host of issues.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reuse NFSDBG_DIRCACHE and NFSDBG_LOOKUPCACHE to provide additional
diagnostic messages that trace the operation of the NFS client's
directory behavior. A few new messages are now generated when NFSDBG_VFS
is active, as well, to trace normal VFS activity. This compromise
provides better trace debugging for those who use pre-built kernels,
without adding a lot of extra noise to the standard debug settings.
Test-plan:
Enable NFS trace debugging with flags 1, 2, or 4. You should be able to
see different types of trace messages with each flag setting.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Invoke the byte and event counter macros where we want to count bytes and
events.
Clean-up: fix a possible NULL dereference in nfs_lock, and simplify
nfs_file_open.
Test-plan:
fsx and iozone on UP and SMP systems, with and without pre-emption. Watch
for memory overwrite bugs, and performance loss (significantly more CPU
required per op).
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.
Modified-by: Ingo Molnar <mingo@elte.hu>
(finished the conversion)
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I missed this one... Any form of rename will result in a delegation
recall, so it is more efficient to return the one we hold before
trying the rename.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_lookup() used to consult a lookup cache before trying an actual wire
lookup operation. The lookup cache would be invalid, of course, if the
parent directory's mtime had changed, so nfs_lookup performed an inode
revalidation on the parent.
Since nfs_lookup() doesn't use a cache anymore, the revalidation is no
longer necessary. There are cases where it will generate a lot of
unnecessary GETATTR traffic.
See http://bugzilla.linux-nfs.org/show_bug.cgi?id=9
Test-plan:
Use lndir and "rm -rf" and watch for excess GETATTR traffic or application
level errors.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If someone tries to rename a directory onto an empty directory, we
currently fail and return EBUSY.
This patch ensures that we try the rename if both source and target
are directories, and that we fail with a correct error of EISDIR if
the source is not a directory.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make NFSv4 return the fully initialized file pointer with the
stateid that it created in the lookup w/intent.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fixes a condition whereby the kernel is returning the non-POSIX error
EBADCOOKIE to userspace.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When doing a rename on top of an existing file that is not in use,
the inode of the overwritten file will remain in the icache.
The fix is to decrement i_nlink of the overwritten inode, like we
do for unlink, rmdir etc already.
Problem diagnosed by Olaf Kirch. This patch is a slight variation
on his fix.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Down the road we want to eliminate the use of the global kernel lock entirely
from the NFS client. To do this, we need to protect the fields in the
nfs_inode structure adequately. Start by serializing updates to the
"cache_validity" field.
Note this change addresses an SMP hang found by njw@osdl.org, where processes
deadlock because nfs_end_data_update and nfs_revalidate_mapping update the
"cache_validity" field without proper serialization.
Test plan:
Millions of fsx ops on SMP clients. Run Nick Wilson's breaknfs program on
large SMP clients.
Signed-off-by: Chuck Lever <cel@netapp.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Introduce atomic bitops to manipulate the bits in the nfs_inode structure's
"flags" field.
Using bitops means we can use a generic wait_on_bit call instead of an ad hoc
locking scheme in fs/nfs/inode.c, so we can remove the "nfs_i_wait" field from
nfs_inode at the same time.
The other new flags field will continue to use bitmask and logic AND and OR.
This permits several flags to be set at the same time efficiently. The
following patch adds a spin lock to protect these flags, and this spin lock
will later cover other fields in the nfs_inode structure, amortizing the cost
of using this type of serialization.
Test plan:
Millions of fsx ops on SMP clients.
Signed-off-by: Chuck Lever <cel@netapp.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Certain bits in nfsi->flags can be manipulated with atomic bitops, and some
are better manipulated via logical bitmask operations.
This patch splits the flags field into two. The next patch introduces atomic
bitops for one of the fields.
Test plan:
Millions of fsx ops on SMP clients.
Signed-off-by: Chuck Lever <cel@netapp.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NFSv3 currently returns the unsigned 64-bit cookie directly to
userspace. The following patch causes the kernel to generate
loff_t offsets for the benefit of userland.
The current server-generated READDIR cookie is cached in the
nfs_open_context instead of in filp->f_pos, so we still end up work
correctly under directory insertions/deletion.
Signed-off-by: Olivier Galibert <galibert@pobox.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This adds acl support fo nfs clients via the NFSACL protocol extension, by
implementing the getxattr, listxattr, setxattr, and removexattr iops for the
system.posix_acl_access and system.posix_acl_default attributes. This patch
implements a dumb version that uses no caching (and thus adds some overhead).
(Another patch in this patchset adds caching as well.)
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add {get,set,list}xattr methods for nfs4. The new methods are no-ops, to be
used by subsequent ACL patch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We should never apply a lookup intent to anything other than the last
path component in an open(), create() or access() call.
Introduce the helper nfs_lookup_check_intent() which always returns
zero if LOOKUP_CONTINUE or LOOKUP_PARENT are set, and returns the
intent flags if we're on the last component of the lookup.
By doing so, we fix a bug in open(O_EXCL), where we may end up
optimizing away a real lookup of the parent directory.
Problem noticed by Linda Dunaphant <linda.dunaphant@ccur.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
