Makes it easier to debug errors on writeback that happen later,
and are being returned on flush or fsync
For example:
writetest-17829 [002] .... 13583.407859: cifs_flush_err: ino=90 rc=-28
Signed-off-by: Steve French <stfrench@microsoft.com>
We ran into a confusing problem where an application wasn't checking
return code on close and so user didn't realize that the application
ran out of disk space. log a warning message (once) in these
cases. For example:
[ 8407.391909] Out of space writing to \\oleg-server\small-share
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Oleg Kravtsov <oleg@tuxera.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Depending on include order:
include/linux/of_clk.h:11:45: warning: ‘struct device_node’ declared inside parameter list will not be visible outside of this definition or declaration
unsigned int of_clk_get_parent_count(struct device_node *np);
^~~~~~~~~~~
include/linux/of_clk.h:12:43: warning: ‘struct device_node’ declared inside parameter list will not be visible outside of this definition or declaration
const char *of_clk_get_parent_name(struct device_node *np, int index);
^~~~~~~~~~~
include/linux/of_clk.h:13:31: warning: ‘struct of_device_id’ declared inside parameter list will not be visible outside of this definition or declaration
void of_clk_init(const struct of_device_id *matches);
^~~~~~~~~~~~
Fix this by adding forward declarations for struct device_node and
struct of_device_id.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lkml.kernel.org/r/20200205194649.31309-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Show the number of bootconfig nodes when applying new bootconfig to
initrd.
Since there are limitations of bootconfig not only in its filesize,
but also the number of nodes, the number should be shown when applying
so that user can get the feeling of scale of current bootconfig.
Link: http://lkml.kernel.org/r/158091061337.27924.10886706631693823982.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add more error messages for following cases.
- Exceeding max number of nodes
- Config tree data is empty (e.g. comment only)
- Config data is empty or exceeding max size
- bootconfig is already initialized
Link: http://lkml.kernel.org/r/158091060401.27924.9024818742827122764.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.
Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72
Cc: stable@vger.kernel.org
Fixes: b9b0c831be ("ftrace: Convert graph filter to use hash tables")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
I am seeing ping failures to IPv6 linklocal addresses with Debian
buster. Easiest example to reproduce is:
$ ping -c1 -w1 ff02::1%eth1
connect: Invalid argument
$ ping -c1 -w1 ff02::1%eth1
PING ff02::01%eth1(ff02::1%eth1) 56 data bytes
64 bytes from fe80::e0:f9ff:fe0c:37%eth1: icmp_seq=1 ttl=64 time=0.059 ms
git bisect traced the failure to
commit b9ef5513c9 ("smack: Check address length before reading address family")
Arguably ping is being stupid since the buster version is not setting
the address family properly (ping on stretch for example does):
$ strace -e connect ping6 -c1 -w1 ff02::1%eth1
connect(5, {sa_family=AF_UNSPEC,
sa_data="\4\1\0\0\0\0\377\2\0\0\0\0\0\0\0\0\0\0\0\0\0\1\3\0\0\0"}, 28)
= -1 EINVAL (Invalid argument)
but the command works fine on kernels prior to this commit, so this is
breakage which goes against the Linux paradigm of "don't break userspace"
Cc: stable@vger.kernel.org
Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
security/smack/smack_lsm.c | 41 +++++++++++++++++++----------------------
1 file changed, 19 insertions(+), 22 deletions(-)
Because the function graph tracer can execute in sections where RCU is not
"watching", the rcu_dereference_sched() for the has needs to be open coded.
This is fine because the RCU "flavor" of the ftrace hash is protected by
its own RCU handling (it does its own little synchronization on every CPU
and does not rely on RCU sched).
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix following instances of sparse error
kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison
Use rcu_dereference_protected to dereference the newly annotated pointer.
Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.com
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix following instances of sparse error
kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison
Use rcu_dereference_protected to access the __rcu annotated pointer.
Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, the single-target build does not work when two
or more sub-directories are given:
$ make fs/ kernel/ lib/
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
DESCEND objtool
make[2]: Nothing to be done for 'kernel/'.
make[2]: Nothing to be done for 'fs/'.
make[2]: Nothing to be done for 'lib/'.
Make it work properly.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Maciej Fijalkowski says:
====================
Cameron reported [0] that on fresh bpf-next he could not run multiple
xdpsock instances in Tx-only mode on single network interface with i40e
driver.
Turns out that Maxim's series [1] which was adding RCU protection around
ndo_xsk_wakeup added check against the __I40E_CONFIG_BUSY being set on
pf->state within i40e_xsk_wakeup() - if it's set, return -ENETDOWN.
Since this bit is set per PF when UMEM is being enabled/disabled, the
situation Cameron stumbled upon was that when he launched second xdpsock
instance, second UMEM was being registered, hence set __I40E_CONFIG_BUSY
which is now observed by first xdpsock and therefore xdpsock's kick_tx()
gets -ENETDOWN as errno.
-ENETDOWN currently is not allowed in kick_tx(), so we were exiting the
first application. Such exit means also XDP program being unloaded and
its dedicated resources, which caused an -ENXIO being return in the
second xdpsock instance.
Let's fix the issue from both sides - protect ourselves from future
xdpsock crashes by allowing for -ENETDOWN errno being set in kick_tx()
(patch 3) and from driver side, return -EAGAIN for the case where PF is
busy (patch 1).
Remove also doubled variable from xdpsock_user.c (patch 2).
Note that ixgbe seems not to be affected since UMEM registration sets
the busy/disable bit per ring, not per PF.
[0]: https://www.spinics.net/lists/xdp-newbies/msg01558.html
[1]: https://lore.kernel.org/netdev/20191217162023.16011-1-maximmi@mellanox.com/
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
ndo_xsk_wakeup() can return -ENETDOWN and there's no particular reason
to bail the whole application out on that case. Let's check in kick_tx()
whether errno was set to mentioned value and basically allow application
to further process frames.
Fixes: 248c7f9c0e ("samples/bpf: convert xdpsock to use libbpf for AF_XDP access")
Reported-by: Cameron Elliott <cameron@cameronelliott.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20200205045834.56795-4-maciej.fijalkowski@intel.com
Seems that by accident there is a doubled declaration of global variable
opt_xdp_bind_flags in xdpsock_user.c. The second one is uninitialized so
compiler was simply ignoring it.
To keep things clean, drop the doubled variable.
Fixes: c543f54698 ("samples/bpf: add unaligned chunks mode support to xdpsock")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20200205045834.56795-3-maciej.fijalkowski@intel.com
Return -EAGAIN instead of -ENETDOWN to provide a slightly milder
information to user space so that an application will know to retry the
syscall when __I40E_CONFIG_BUSY bit is set on pf->state.
Fixes: b3873a5be7 ("net/i40e: Fix concurrency issues between config flow and XSK")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20200205045834.56795-2-maciej.fijalkowski@intel.com
Add missing dependency of $(BPFOBJ) to $(LIBBPF_SRC), so that running make
in runqslower/ will rebuild libbpf.a when there is change in libbpf/.
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200204215037.2258698-1-songliubraving@fb.com
This set of changes are mostly cleanups and minor improvements with some
new chip support for some drivers.
-----BEGIN PGP SIGNATURE-----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=x0aH
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Mostly cleanups and minor improvements with some new chip support for
some drivers"
* tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: Remove set but not set variable 'pwm'
pwm: sun4i: Initialize variables before use
pwm: stm32: Remove automatic output enable
pwm: sun4i: Narrow scope of local variable
pwm: bcm2835: Allow building for ARCH_BRCMSTB
pwm: imx27: Eliminate error message for defer probe
pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR
pwm: sun4i: Move pwm_calculate() out of spin_lock()
pwm: omap-dmtimer: Allow compiling with COMPILE_TEST
pwm: omap-dmtimer: put_device() after of_find_device_by_node()
pwm: omap-dmtimer: Simplify error handling
pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
pwm: Implement tracing for .get_state() and .apply_state()
pwm: rcar: Document inability to set duty_cycle = 0
pwm: rcar: Drop useless call to pwm_get_state()
pwm: Fix minor Kconfig whitespace issues
pwm: atmel: Implement .get_state()
pwm: atmel: Use register accessors for channels
pwm: atmel: Document known weaknesses of both hardware and software
pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation
...
Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the
PF PASID configuration is shared by its VFs, and VFs must not implement
their own PASID Capability. But commit 751035b8dc ("PCI/ATS: Cache PASID
Capability offset") changed pci_max_pasids() and pci_pasid_features() to
use the PASID Capability of the VF device instead of the associated PF
device. This leads to IOMMU bind failures when pci_max_pasids() and
pci_pasid_features() are called for VFs.
In pci_max_pasids() and pci_pasid_features(), always use the PF PASID
Capability.
Fixes: 751035b8dc ("PCI/ATS: Cache PASID Capability offset")
Link: https://lore.kernel.org/r/fe891f9755cb18349389609e7fed9940fc5b081a.1580325170.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v5.5+
Including:
- Allow to compile the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba75) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=HMIT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Allow compiling the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba75) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various
drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
iommu/amd: Remove the unnecessary assignment
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
iommu/vt-d: Unnecessary to handle default identity domain
iommu/vt-d: Allow devices with RMRRs to use identity domain
iommu/vt-d: Add RMRR base and end addresses sanity check
iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
iommu/amd: Remove unused struct member
iommu/amd: Replace two consecutive readl calls with one readq
iommu/vt-d: Don't reject Host Bridge due to scope mismatch
PCI/ATS: Add PASID stubs
iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
iommu/arm-smmu-v3: Improve add_device() error handling
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
iommu/arm-smmu-v3: Add second level of context descriptor table
iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
iommu/arm-smmu-v3: Propagate ssid_bits
iommu/arm-smmu-v3: Add support for Substream IDs
iommu/arm-smmu-v3: Add context descriptor tables allocators
iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
ACPI/IORT: Parse SSID property of named component node
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXjrKegAKCRCAXGG7T9hj
vkAzAQDtV8yxItCMTC/0vxMZnBUk7t+KFuSg7UIoWkwHPvd2CQEAjlhWeX0u3z9D
uxwmxdjri1nlrTJBulbvCkJuTfZDYwo=
=8Q8T
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix a bug introduced in 5.5 in the Xen gntdev driver
- fix the Xen balloon driver when running on ancient Xen versions
- allow Xen stubdoms to control interrupt enable flags of
passed-through PCI cards
- release resources in Xen backends under memory pressure
* tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/blkback: Consistently insert one empty line between functions
xen/blkback: Remove unnecessary static variable name prefixes
xen/blkback: Squeeze page pools if a memory pressure is detected
xenbus/backend: Protect xenbus callback with lock
xenbus/backend: Add memory pressure handler callback
xen/gntdev: Do not use mm notifiers with autotranslating guests
xen/balloon: Support xend-based toolstack take two
xen-pciback: optionally allow interrupt enable flag writes
When using a non-release version of Sphinx, from a local build (with
improvements for kernel doc handling, why not),
sphinx-build --version
reports versions of the form
sphinx-build 3.0.0+/4703d9119972
i.e. base version, a plus symbol, slash, and the start of the git hash
of whatever repository the command is run in (no, not the hash that
was used to build Sphinx!).
This patch fixes the installation check in sphinx-pre-install to
recognise such version output.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200124183316.1719218-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Add KPROBES_ON_FTRACE support.
- Add EP11 AES secure keys support.
- PAES rework and prerequisites for paes-s390 ciphers selftests.
- Fix page table upgrade for hugetlbfs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl465KkACgkQjYWKoQLX
FBiR/wf/e+Fj/mDYHElcZ55MWaORBpp8NT94IYSt0RbII1PEh9cB8NciYLQdFFmc
bUlNj7u3fHwk1D8S3pOSYKhIaHQQOWDqd/uNTzbCicbbVhuwmslLc+jffnORtlKe
mCHeQsVAw3NwE8FIPhPMTAKBZV0pLkM4T9PA2xgeuB5cShoMgXgLgUoIwHJ4c2TP
WwnolIJ/QR0nKpmPI5lp0+PjjSk/8nA/VvmpxgYbJCTQm8dhwhAfePh8Kf6pEp6K
wETUaIyWkX1a+kI9h2qIBsR7KplqqrKABA5sxnPDQW/kut1Pc/2fWxMOBxux0f/V
Kk+f6yoVbe7X6VYm+V4AyyAzQMRggQ==
=9Eeg
-----END PGP SIGNATURE-----
Merge tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
"The second round of s390 fixes and features for 5.6:
- Add KPROBES_ON_FTRACE support
- Add EP11 AES secure keys support
- PAES rework and prerequisites for paes-s390 ciphers selftests
- Fix page table upgrade for hugetlbfs"
* tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pkey/zcrypt: Support EP11 AES secure keys
s390/zcrypt: extend EP11 card and queue sysfs attributes
s390/zcrypt: add new low level ep11 functions support file
s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb
s390/zcrypt: enable card/domain autoselect on ep11 cprbs
s390/crypto: enable clear key values for paes ciphers
s390/pkey: Add support for key blob with clear key value
s390/crypto: Rework on paes implementation
s390: support KPROBES_ON_FTRACE
s390/mm: fix dynamic pagetable upgrade for hugetlbfs
Update projects URLs in the changes.rst file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/a9c3c509-8f30-fcc4-d9e0-b53aeaa89e4f@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix for several documentation build warnings related to missing blank lines
after explicit mark up.
Exact warning message:
WARNING: Explicit markup ends without a blank line; unexpected unindent.
Signed-off-by: Sameer Rahmani <lxsameer@gnu.org>
Link: https://lore.kernel.org/r/20200203201543.24834-1-lxsameer@gnu.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 0ea6e61122 ("Documentation: update broken web addresses.")
removed a link to 'http://patchwork.ozlabs.org' in howto, but the change
has not applied to the Korean translation. This commit simply applies
the change to the Korean translation. The link is restored now, though.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Link: https://lore.kernel.org/r/20200131205237.29535-4-sj38.park@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 2e4f5382d1 ("locking/doc: Rename LOCK/UNLOCK to
ACQUIRE/RELEASE") has not appied to 'spinlock.rst'. This commit updates
the doc for the change.
Signed-off-by: SeongJae Park <sjpark@amazon.com>
Link: https://lore.kernel.org/r/20200131205237.29535-2-sj38.park@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The function vmx_decache_cr0_guest_bits() is only called below its
implementation. So this is meaningless and should be removed.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-add code to mark CR4.UMIP as reserved if UMIP is not supported by the
host. The UMIP handling was unintentionally dropped during a recent
refactoring.
Not flagging CR4.UMIP allows the guest to set its CR4.UMIP regardless of
host support or userspace desires. On CPUs with UMIP support, including
emulated UMIP, this allows the guest to enable UMIP against the wishes
of the userspace VMM. On CPUs without any form of UMIP, this results in
a failed VM-Enter due to invalid guest state.
Fixes: 345599f9a2 ("KVM: x86: Add macro to ensure reserved cr4 bits checks stay in sync")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Three of the feature bits in vmxfeatures.h have names that are different
from the Intel SDM. The names have been adjusted recently in KVM but they
were using the old name in the tip tree's x86/cpu branch. Adjust for
consistency.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Userspace that does not know about the AMD_IBRS bit might still
allow the guest to protect itself with MSR_IA32_SPEC_CTRL using
the Intel SPEC_CTRL bit. However, svm.c disallows this and will
cause a #GP in the guest when writing to the MSR. Fix this by
loosening the test and allowing the Intel CPUID bit, and in fact
allow the AMD_STIBP bit as well since it allows writing to
MSR_IA32_SPEC_CTRL too.
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Analyzed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Correct the logic in intel_pmu_set_msr() for fixed and general purpose
counters. This was recently changed to set pmc->counter without taking
in to account the value of pmc_read_counter() which will be incorrect if
the counter is currently running and non-zero; this changes back to the
old logic which accounted for the value of currently running counters.
Signed-off-by: Eric Hankland <ehankland@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sane L1 hypervisors are not supposed to turn any of the unsupported VMX
controls on for its guests and nested_vmx_check_controls() checks for
that. This is, however, not the case for the controls which are supported
on the host but are missing in enlightened VMCS and when eVMCS is in use.
It would certainly be possible to add these missing checks to
nested_check_vm_execution_controls()/_vm_exit_controls()/.. but it seems
preferable to keep eVMCS-specific stuff in eVMCS and reduce the impact on
non-eVMCS guests by doing less unrelated checks. Create a separate
nested_evmcs_check_controls() for this purpose.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With fine grained VMX feature enablement QEMU>=4.2 tries to do KVM_SET_MSRS
with default (matching CPU model) values and in case eVMCS is also enabled,
fails.
It would be possible to drop VMX feature filtering completely and make
this a guest's responsibility: if it decides to use eVMCS it should know
which fields are available and which are not. Hyper-V mostly complies to
this, however, there are some problematic controls:
SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES
VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL
which Hyper-V enables. As there are no corresponding fields in eVMCS, we
can't handle this properly in KVM. This is a Hyper-V issue.
Move VMX controls sanitization from nested_enable_evmcs() to vmx_get_msr(),
and do the bare minimum (only clear controls which are known to cause issues).
This allows userspace to keep setting controls it wants and at the same
time hides them from the guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Separate the functions for generating MMIO page table entries from the
function that inserts them into the paging structure. This refactoring
will facilitate changes to the MMU sychronization model to use atomic
compare / exchanges (which are not guaranteed to succeed) instead of a
monolithic MMU lock.
No functional change expected.
Tested by running kvm-unit-tests on an Intel Haswell machine. This
commit introduced no new failures.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are several functions which pass an access permission mask for
SPTEs as an unsigned. This works, but checkpatch complains about it.
Switch the occurrences of unsigned to unsigned int to satisfy checkpatch.
No functional change expected.
Tested by running kvm-unit-tests on an Intel Haswell machine. This
commit introduced no new failures.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The blurb pertaining to the return value of nested_vmx_load_cr3() no
longer matches reality, remove it entirely as the behavior it is
attempting to document is quite obvious when reading the actual code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold kvm_mips_comparecount_func() into kvm_mips_comparecount_wakeup() to
eliminate the nondescript function name as well as its unnecessary cast
of a vcpu to "unsigned long" and back to a vcpu. Presumably func() was
used as a callback at some point during pre-upstream development, as
wakeup() is the only user of func() and has been the only user since
both with introduced by commit 669e846e6c ("KVM/MIPS32: MIPS arch
specific APIs for KVM").
Cc: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hoist kvm_mips_comparecount_wakeup() above its only user,
kvm_arch_vcpu_create() to fix a compilation error due to referencing an
undefined function.
Fixes: d11dfed5d7 ("KVM: MIPS: Move all vcpu init code into kvm_arch_vcpu_create()")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_setup_pv_tlb_flush will waste memory and print a misguiding message
when KVM paravirtualization is not available.
Intel SDM says that the when cpuid is used with EAX higher than the
maximum supported value for basic of extended function, the data for the
highest supported basic function will be returned.
So, in some systems, kvm_arch_para_features will return bogus data,
causing kvm_setup_pv_tlb_flush to detect support for pv tlb flush.
Testing for kvm_para_available will work as it checks for the hypervisor
signature.
Besides, when the "nopv" command line parameter is used, it should not
continue as well, as kvm_guest_init will no be called in that case.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit cedeac9df4 ("qed: Add support for Timestamping the unicast
PTP packets.") handles the timestamping of L4 ptp packets only.
This patch adds driver changes to detect/timestamp both L2/L4 unicast
PTP packets.
Fixes: cedeac9df4 ("qed: Add support for Timestamping the unicast PTP packets.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Take a u64 instead of an unsigned long in kvm_dr7_valid() to fix a build
warning on i386 due to right-shifting a 32-bit value by 32 when checking
for bits being set in dr7[63:32].
Alternatively, the warning could be resolved by rewriting the check to
use an i386-friendly method, but taking a u64 fixes another oddity on
32-bit KVM. Beause KVM implements natural width VMCS fields as u64s to
avoid layout issues between 32-bit and 64-bit, a devious guest can stuff
vmcs12->guest_dr7 with a 64-bit value even when both the guest and host
are 32-bit kernels. KVM eventually drops vmcs12->guest_dr7[63:32] when
propagating vmcs12->guest_dr7 to vmcs02, but ideally KVM would not rely
on that behavior for correctness.
Cc: Jim Mattson <jmattson@google.com>
Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Fixes: ecb697d10f70 ("KVM: nVMX: Check GUEST_DR7 on vmentry of nested guests")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 53fafdbb8b ("KVM: x86: switch KVMCLOCK base to monotonic raw
clock") changed kvmclock to use tkr_raw instead of tkr_mono. However,
the default kvmclock_offset for the VM was still based on the monotonic
clock and, if the raw clock drifted enough from the monotonic clock,
this could cause a negative system_time to be written to the guest's
struct pvclock. RHEL5 does not like it and (if it boots fast enough to
observe a negative time value) it hangs.
There is another thing to be careful about: getboottime64 returns the
host boot time with tkr_mono frequency, and subtracting the tkr_raw-based
kvmclock value will cause the wallclock to be off if tkr_raw drifts
from tkr_mono. To avoid this, compute the wallclock delta from the
current time instead of being clever and using getboottime64.
Fixes: 53fafdbb8b ("KVM: x86: switch KVMCLOCK base to monotonic raw clock")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
