The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Fixes: 35af640386 ("crypto: caam - Check for CAAM block presence before registering with crypto layer")
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
unlikely has already included in IS_ERR(), so just
remove redundant likely/unlikely annotation.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When generating a split key or hashing the key, DMA mapping the key
buffers coming directly from user is incorrect, since they are
not guaranteed to be DMAable.
Update driver to first copy user-provided key in the output buffer
("key_out") and then use this buffer for in-place computation
(split key generation, respectively key hashing).
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a side effect of adding xcbc support, which leads to DMA mapping the
key twice.
Fixes: 12b8567f6f ("crypto: caam - add support for xcbc(aes)")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When driver started using state->caam_ctxt for storing both running hash
and final hash, it was not updated to handle different DMA unmap
lengths.
Cc: <stable@vger.kernel.org> # v4.19+
Fixes: c19650d6ea ("crypto: caam - fix DMA mapping of stack memory")
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add cpu_relax() in the loop that tries to enqueue the FDs.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid console being flooded with prints in case HW is too busy to accept
new enqueue requests.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Driver was relying on an older DPIO API, which provided a CPU-affine DPIO
in case it was called with preemption disabled.
Since this is no longer the case, save the CPU-affine DPIO in per-cpu
private structure during setup and further use it on the hot path.
Note that preemption is no longer disabled while trying to enqueue an
FD. Thus it might be possible to run the enqueue on a different CPU
(due to migration, when in process context), however this wouldn't be a
functionality issue.
Since we allow for all cores to enqueue, we take care of data
structures setup to handle the case when number of (Rx, Tx) queue pairs
is smaller than number of cores.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify setkey callback for cbc des and 3des to check for weak keys.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add ecb mode support for aes, des, 3des and arc4 ciphers.
ecb(*) reuses existing skcipher implementation, updating it with support
for no IV.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mapped_{src,dst}_nents _returned_ from the dma_map_sg call (which
could be less than src/dst_nents) have to be used to generate the aead,
skcipher job descriptors.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
when the source sg contains more than 1 fragment and
destination sg contains 1 fragment, the caam driver
mishandle the buffers to be sent to caam.
Fixes: f2147b88b2 ("crypto: caam - Convert GCM to new AEAD interface")
Cc: <stable@vger.kernel.org> # 4.2+
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Arun Pathak <arun.pathak@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Roland reports the following issue and provides a root cause analysis:
"On a v4.19 i.MX6 system with IMA and CONFIG_DMA_API_DEBUG enabled, a
warning is generated when accessing files on a filesystem for which IMA
measurement is enabled:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:1181 check_for_stack.part.9+0xd0/0x120
caam_jr 2101000.jr0: DMA-API: device driver maps memory from stack [addr=b668049e]
Modules linked in:
CPU: 0 PID: 1 Comm: switch_root Not tainted 4.19.0-20181214-1 #2
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<c010efb8>] (dump_backtrace) from [<c010f2d0>] (show_stack+0x20/0x24)
[<c010f2b0>] (show_stack) from [<c08b04f4>] (dump_stack+0xa0/0xcc)
[<c08b0454>] (dump_stack) from [<c012b610>] (__warn+0xf0/0x108)
[<c012b520>] (__warn) from [<c012b680>] (warn_slowpath_fmt+0x58/0x74)
[<c012b62c>] (warn_slowpath_fmt) from [<c0199acc>] (check_for_stack.part.9+0xd0/0x120)
[<c01999fc>] (check_for_stack.part.9) from [<c019a040>] (debug_dma_map_page+0x144/0x174)
[<c0199efc>] (debug_dma_map_page) from [<c065f7f4>] (ahash_final_ctx+0x5b4/0xcf0)
[<c065f240>] (ahash_final_ctx) from [<c065b3c4>] (ahash_final+0x1c/0x20)
[<c065b3a8>] (ahash_final) from [<c03fe278>] (crypto_ahash_op+0x38/0x80)
[<c03fe240>] (crypto_ahash_op) from [<c03fe2e0>] (crypto_ahash_final+0x20/0x24)
[<c03fe2c0>] (crypto_ahash_final) from [<c03f19a8>] (ima_calc_file_hash+0x29c/0xa40)
[<c03f170c>] (ima_calc_file_hash) from [<c03f2b24>] (ima_collect_measurement+0x1dc/0x240)
[<c03f2948>] (ima_collect_measurement) from [<c03f0a60>] (process_measurement+0x4c4/0x6b8)
[<c03f059c>] (process_measurement) from [<c03f0cdc>] (ima_file_check+0x88/0xa4)
[<c03f0c54>] (ima_file_check) from [<c02d8adc>] (path_openat+0x5d8/0x1364)
[<c02d8504>] (path_openat) from [<c02dad24>] (do_filp_open+0x84/0xf0)
[<c02daca0>] (do_filp_open) from [<c02cf50c>] (do_open_execat+0x84/0x1b0)
[<c02cf488>] (do_open_execat) from [<c02d1058>] (__do_execve_file+0x43c/0x890)
[<c02d0c1c>] (__do_execve_file) from [<c02d1770>] (sys_execve+0x44/0x4c)
[<c02d172c>] (sys_execve) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
---[ end trace 3455789a10e3aefd ]---
The cause is that the struct ahash_request *req is created as a
stack-local variable up in the stack (presumably somewhere in the IMA
implementation), then passed down into the CAAM driver, which tries to
dma_single_map the req->result (indirectly via map_seq_out_ptr_result)
in order to make that buffer available for the CAAM to store the result
of the following hash operation.
The calling code doesn't know how req will be used by the CAAM driver,
and there could be other such occurrences where stack memory is passed
down to the CAAM driver. Therefore we should rather fix this issue in
the CAAM driver where the requirements are known."
Fix this problem by:
-instructing the crypto engine to write the final hash in state->caam_ctx
-subsequently memcpy-ing the final hash into req->result
Cc: <stable@vger.kernel.org> # v4.19+
Reported-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "Horia Geantă" <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Recent AEAD changes in testmgr framework introduced by commit
a0d608ee5e ("crypto: testmgr - unify the AEAD encryption and decryption test vectors")
uncovered an error in the CAAM drivers, since they don't correctly
handle the case when AEAD output length is zero.
Add checks to avoid feeding zero-length req->dst to DMA API.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add cmac(aes) keyed hash offloading support.
Similar to xcbc implementation, driver must make sure there are still
some bytes buffered when ahash_final() is called. This way HW is able to
decide whether padding is needed and which key to derive (L -> K1 / K2)
for the last block.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Automatically add a device link between the actual device requesting the
dpaa2_io_service_register and the underlying dpaa2_io used. This link
will ensure that when a DPIO device, which is indirectly used by other
devices, is unbound any consumer devices will be also unbound from their
drivers.
For example, any DPNI, bound to the dpaa2-eth driver, which is using
DPIO devices will be unbound before its supplier device.
Also, add a new parameter to the dpaa2_io_service_[de]register functions
to specify the requesting device (ie the consumer).
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Add xcbc(aes) offloading support.
Due to xcbc algorithm design and HW implementation in CAAM,
driver must still have some bytes to send to the crypto engine when
ahash_final() is called - such that HW correctly uses either K2 or K3
for the last block.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For keyed hash algorithms, shared descriptors are currently generated
twice:
-at tfm initialization time, in cra_init() callback
-in setkey() callback
Since it's mandatory to call setkey() for keyed algorithms, drop the
generation in cra_init().
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix error reporting when preparation of an hmac algorithm
for registration fails: print the hmac algorithm name, not the unkeyed
hash algorithm name.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are several issues with symbols shared b/w:
-caam/jr and caam/qi drivers on one hand
-caam/qi2 driver on the other hand
Commit 52813ab249 ("crypto: caam/qi2 - avoid double export") fixed
some of them, however compilation still fails for CRYPTO_DEV_FSL_CAAM=m
and CRYPTO_DEV_FSL_DPAA2_CAAM=y.
Another issue is related to dependency cycles reported by depmod when
CRYPTO_DEV_FSL_CAAM=n and CRYPTO_DEV_FSL_DPAA2_CAAM=m, as mentioned in
82c7b351be ("Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO"")
To fix all these, move the symbols shared by these drivers in a common
location. The only existing possibility is error.c file (note that naming
doesn't help and should probably change).
Fixes: 52813ab249 ("crypto: caam/qi2 - avoid double export")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The addition of Chacha20 + Poly1305 authenc support inadvertently broke
detection of algorithms supported by MDHA (Message Digest Hardware
Accelerator), fix it.
Fixes: d6bbd4eea2 ("crypto: caam/jr - add support for Chacha20 + Poly1305")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Chacha20 + Poly1305 combined AEAD:
-generic (rfc7539)
-IPsec (rfc7634 - known as rfc7539esp in the kernel)
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Chacha20 + Poly1305 combined AEAD:
-generic (rfc7539)
-IPsec (rfc7634 - known as rfc7539esp in the kernel)
Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for ChaCha20 skcipher algorithm.
Signed-off-by: Carmen Iorga <carmen.iorga@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Era 10 changes the register map.
The updates that affect the drivers:
-new version registers are added
-DBG_DBG[deco_state] field is moved to a new register -
DBG_EXEC[19:16] @ 8_0E3Ch.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously, a tree-wide change added SPDX license identifiers to
files lacking licensing information:
b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
To be consistent update the rest of the files:
-files with license specified by means of MODULE_LICENSE()
-files with complete license text
-Kconfig
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CGRs (Congestion Groups) have to be freed by the same CPU that
initialized them.
This is why currently the driver takes special measures; however, using
set_cpus_allowed_ptr() is incorrect - as reported by Sebastian.
Instead of the generic solution of replacing set_cpus_allowed_ptr() with
work_on_cpu_safe(), we use the qman_delete_cgr_safe() QBMan API instead
of qman_delete_cgr() - which internally takes care of proper CGR
deletion.
Link: https://lkml.kernel.org/r/20181005125443.dfhd2asqktm22ney@linutronix.de
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Both the caam ctrl file and dpaa2_caam export a couple of flags. They
use an #ifdef check to make sure that each flag is only built once,
but this fails if they are both loadable modules:
WARNING: drivers/crypto/caam/dpaa2_caam: 'caam_little_end' exported twice. Previous export was in drivers/crypto/caam/caam.ko
WARNING: drivers/crypto/caam/dpaa2_caam: 'caam_imx' exported twice. Previous export was in drivers/crypto/caam/caam.ko
Change the #ifdef to an IS_ENABLED() check in order to make it work in
all configurations. It may be better to redesign this aspect of the
two drivers in a cleaner way.
Fixes: 8d818c1055 ("crypto: caam/qi2 - add DPAA2-CAAM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This driver implements a (part of a) network driver, and fails to
build if we have turned off networking support:
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_caam_fqdan_cb':
caamalg_qi2.c:(.text+0x577c): undefined reference to `napi_schedule_prep'
caamalg_qi2.c:(.text+0x578c): undefined reference to `__napi_schedule_irqoff'
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_dpseci_poll':
caamalg_qi2.c:(.text+0x59b8): undefined reference to `napi_complete_done'
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_caam_remove':
caamalg_qi2.c:(.text.unlikely+0x4e0): undefined reference to `napi_disable'
caamalg_qi2.c:(.text.unlikely+0x4e8): undefined reference to `netif_napi_del'
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_dpseci_setup':
caamalg_qi2.c:(.text.unlikely+0xc98): undefined reference to `netif_napi_add'
From what I can tell, CONFIG_NETDEVICES is the correct dependency here,
and adding it fixes the randconfig failures.
Fixes: 8d818c1055 ("crypto: caam/qi2 - add DPAA2-CAAM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for unkeyed and keyed (hmac) md5, sha algorithms.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam/qi2 driver will support ahash algorithms,
thus move ahash descriptors generation in a shared location.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support to submit the following skcipher algorithms
via the DPSECI backend:
cbc({aes,des,des3_ede})
ctr(aes), rfc3686(ctr(aes))
xts(aes)
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add CAAM driver that works using the DPSECI backend, i.e. manages
DPSECI DPAA2 objects sitting on the Management Complex (MC) fsl-mc bus.
Data transfers (crypto requests) are sent/received to/from CAAM crypto
engine via Queue Interface (v2), this being similar to existing caam/qi.
OTOH, configuration/setup (obtaining virtual queue IDs, authorization
etc.) is done by sending commands to the MC f/w.
Note that the CAAM accelerator included in DPAA2 platforms still has
Job Rings. However, the driver being added does not handle access
via this backend. Kconfig & Makefile are updated such that DPAA2-CAAM
(a.k.a. "caam/qi2") driver does not depend on caam/jr or caam/qi
backends - which rely on platform bus support (ctrl.c).
Support for the following aead and authenc algorithms is also added
in this patch:
-aead:
gcm(aes)
rfc4106(gcm(aes))
rfc4543(gcm(aes))
-authenc:
authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede}))
echainiv(authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede})))
authenc(hmac({md5,sha*}),rfc3686(ctr(aes))
seqiv(authenc(hmac({md5,sha*}),rfc3686(ctr(aes)))
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support to translate error codes returned by QI v2, i.e.
Queue Interface present on DataPath Acceleration Architecture
v2 (DPAA2).
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the low-level API that allows to manage DPSECI DPAA2 objects
that sit on the Management Complex (MC) fsl-mc bus.
The API is compatible with MC firmware 10.2.0+.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In some cases the zero-length hw_desc array at the end of
ablkcipher_edesc struct requires for 4B of tail padding.
Due to tail padding and the way pointers to S/G table and IV
are computed:
edesc->sec4_sg = (void *)edesc + sizeof(struct ablkcipher_edesc) +
desc_bytes;
iv = (u8 *)edesc->hw_desc + desc_bytes + sec4_sg_bytes;
first 4 bytes of IV are overwritten by S/G table.
Update computation of pointer to S/G table to rely on offset of hw_desc
member and not on sizeof() operator.
Cc: <stable@vger.kernel.org> # 4.13+
Fixes: 115957bb3e ("crypto: caam - fix IV DMA mapping and updating")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
- Check for the right CPU feature bit in sm4-ce on arm64.
- Fix scatterwalk WARN_ON in aes-gcm-ce on arm64.
- Fix unaligned fault in aesni on x86.
- Fix potential NULL pointer dereference on exit in chtls.
- Fix DMA mapping direction for RSA in caam.
- Fix error path return value for xts setkey in caam.
- Fix address endianness when DMA unmapping in caam.
- Fix sleep-in-atomic in vmx.
- Fix command corruption when queue is full in cavium/nitrox.
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: cavium/nitrox - fix for command corruption in queue full case with backlog submissions.
crypto: vmx - Fix sleep-in-atomic bugs
crypto: arm64/aes-gcm-ce - fix scatterwalk API violation
crypto: aesni - Use unaligned loads from gcm_context_data
crypto: chtls - fix null dereference chtls_free_uld()
crypto: arm64/sm4-ce - check for the right CPU feature bit
crypto: caam - fix DMA mapping direction for RSA forms 2 & 3
crypto: caam/qi - fix error path in xts setkey
crypto: caam/jr - fix descriptor DMA unmapping
Crypto engine needs some temporary locations in external memory for
running RSA decrypt forms 2 and 3 (CRT).
These are named "tmp1" and "tmp2" in the PDB.
Update DMA mapping direction of tmp1 and tmp2 from TO_DEVICE to
BIDIRECTIONAL, since engine needs r/w access.
Cc: <stable@vger.kernel.org> # 4.13+
Fixes: 52e26d77b8 ("crypto: caam - add support for RSA key form 2")
Fixes: 4a651b122a ("crypto: caam - add support for RSA key form 3")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
