There is no need to pass a genpd struct to pm_genpd_remove_device(), as we
already have the information about the PM domain (genpd) through the device
structure.
Additionally, we don't allow to remove a PM domain from a device, other
than the one it may have assigned to it, so really it does not make sense
to have a separate in-param for it.
For these reason, drop it and update the current only call to
pm_genpd_remove_device() from amdgpu_acp.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are still a few non-DT existing users of genpd, however neither of
them uses __pm_genpd_add_device(), hence let's drop it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Using "extern" to declare a function in a public header file is somewhat
pointless, but also doesn't hurt. However, to make all the function
declarations in pm_domain.h to be consistent, let's drop the use of
"extern".
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that genpd supports performance states, add this additional
attribute as part of the power domains debugfs entry, to display
the current performance state for the Power domain.
Suggested-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull more OPP updates for v4.18 from Viresh Kumar.
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Allow same OPP table to be used for multiple genpd
PM / OPP: Fix shared OPP table support in dev_pm_opp_register_set_opp_helper()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_regulators()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_prop_name()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_supported_hw()
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.
This change adds documentation for the DT bindings.
The "operating-points-v2-kryo-cpu" DT extends the "operating-points-v2"
with following parameters:
- nvmem-cells (NVMEM area containig the speedbin information)
- opp-supported-hw: A single 32 bit bitmap value,
representing compatible HW:
0: MSM8996 V3, speedbin 0
1: MSM8996 V3, speedbin 1
2: MSM8996 V3, speedbin 2
3: unused
4: MSM8996 SG, speedbin 0
5: MSM8996 SG, speedbin 1
6: MSM8996 SG, speedbin 2
7-31: unused
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
the CPU frequency subset and voltage value of each OPP varies
based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
defines the voltage and frequency value based on the msm-id in SMEM
and speedbin blown in the efuse combination.
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The OPP binding says:
Property: operating-points-v2
...
This can contain more than one phandle for power domain
providers that provide multiple power domains. That is, one
phandle for each power domain. If only one phandle is available,
then the same OPP table will be used for all power domains
provided by the power domain provider.
But the OPP core isn't allowing the same OPP table to be used for
multiple domains. Update dev_pm_opp_of_add_table_indexed() to allow
that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Use the static SRCU initializer for `cpufreq_transition_notifier_list'.
This avoids the init_cpufreq_transition_notifier_list() initcall. Its
only purpose is to initialize the SRCU notifier once during boot and set
another variable which is used as an indicator whether the init was
perfromed before cpufreq_register_notifier() was used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are macros for static initializer for the three out of four
possible notifier types, that are:
ATOMIC_NOTIFIER_HEAD()
BLOCKING_NOTIFIER_HEAD()
RAW_NOTIFIER_HEAD()
This patch provides a static initilizer for the forth type to make it
complete.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the policy limits are updated via cpufreq_update_policy() and
subsequently via sysfs, the limits stored in user_policy may be
set incorrectly.
For example, if both min and max are set via sysfs to the maximum
available frequency, user_policy.min and user_policy.max will also
be the maximum. If a policy notifier triggered by
cpufreq_update_policy() lowers both the min and the max at this
point, that change is not reflected by the user_policy limits, so
if the max is updated again via sysfs to the same lower value,
then user_policy.max will be lower than user_policy.min which
shouldn't happen. In particular, if one of the policy CPUs is
then taken offline and back online, cpufreq_set_policy() will
fail for it due to a failing limits check.
To prevent that from happening, initialize the min and max fields
of the new_policy object to the ones stored in user_policy that
were previously set via sysfs.
Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull input fixes from Dmitry Torokhov:
"We are switching a bunch of Lenovo devices with Synaptics touchpads
from PS/2 emulation over to native RMI/SMbus.
Given that all commits are marked for stable there is no point
delaying them till next release"
[ Also fix a too-small stack array for i2c communication in elan driver ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c_smbus - fix corrupted stack
Input: synaptics - add Lenovo 80 series ids to SMBus
Input: synaptics - add Intertouch support on X1 Carbon 6th and X280
Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI
Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMI
Call trace:
[<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428
[<ffffff9203a8dbf8>] show_stack+0x28/0x38
[<ffffff920409bfb8>] dump_stack+0xd4/0x124
[<ffffff9203d187e8>] print_address_description+0x68/0x258
[<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0
[<ffffff9203d1927c>] kasan_report+0x5c/0x70
[<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0
[<ffffff9203d17cdc>] memcpy+0x34/0x68
[<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160
[<ffffff9203d75490>] vfs_getxattr+0xc8/0x120
[<ffffff9203d75d68>] getxattr+0x100/0x2c8
[<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0
[<ffffff9203a83f70>] el0_svc_naked+0x24/0x28
If user get root access and calls security.selinux setxattr() with an
embedded NUL on a file and then if some process performs a getxattr()
on that file with a length greater than the actual length of the string,
it would result in a panic.
To fix this, add the actual length of the string to the security context
instead of the length passed by the userspace process.
Signed-off-by: Sachin Grover <sgrover@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull AFS fixes from David Howells:
- fix a BUG triggerable from faccessat()
- fix the mounting of backup volumes
* tag 'afs-fixes-20180529' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix mounting of backup volumes
afs: Fix directory permissions check
Pull NVMe fix from Christoph:
"Below is a one-liner fix from Max that unbreaks T10-DIF support, which
got broken in 4.15."
* 'nvme-4.17' of git://git.infradead.org/nvme:
nvme: fix extended data LBA supported setting
This value depands on the metadata support value, so reorder the
initialization to fit.
Fixes: b5be3b392 ("nvme: always unregister the integrity profile in __nvme_revalidate_disk")
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
bugs that deal with triggers and instances.
The first is a generic trigger bug where the triggers are not removed
from a link list properly when deleting an instance.
The second is specific to snapshots, where the snapshot is does the
snapshot to the top level buffer, when it is suppose to snapshot the
buffer associated to the instance the snapshot trigger exists in.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWw0+4hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpwyAQC56/yYzfpJnpjwcI2E7j8FihLg0Nlr
bq85CcQGRm07dwD+L90disWyPxpxH/fGO4OCET1LeoaO1I/fBfECR2XXjQY=
=w4al
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While writing selftests for a new feature, I triggered two existing
bugs that deal with triggers and instances.
- a generic trigger bug where the triggers are not removed from a
linked list properly when deleting an instance.
- a bug specific to snapshots, where the snapshot is done in the top
level buffer, when it is supposed to snapshot the buffer associated
to the instance the snapshot trigger exists in"
* tag 'trace-v4.17-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Make the snapshot trigger work with instances
tracing: Fix crash when freeing instances with event triggers
The snapshot trigger currently only affects the main ring buffer, even when
it is used by the instances. This can be confusing as the snapshot trigger
is listed in the instance.
> # cd /sys/kernel/tracing
> # mkdir instances/foo
> # echo snapshot > instances/foo/events/syscalls/sys_enter_fchownat/trigger
> # echo top buffer > trace_marker
> # echo foo buffer > instances/foo/trace_marker
> # touch /tmp/bar
> # chown rostedt /tmp/bar
> # cat instances/foo/snapshot
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
> # cat snapshot
# tracer: nop
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
bash-1189 [000] .... 111.488323: tracing_mark_write: top buffer
Not only did the snapshot occur in the top level buffer, but the instance
snapshot buffer should have been allocated, and it is still free.
Cc: stable@vger.kernel.org
Fixes: 85f2b08268 ("tracing: Add basic event trigger framework")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Here is the nds32 patch set based on 4.17-rc6.
Contained in here are the bug fixes and building error fixes for nds32.
These are the LTP20170427 testing results. hackbench01 may fail sometimes.
We are still investigating this issue.
Total Tests: 1902
Total Skipped Tests: 593
Total Failures: 420
Kernel Version: 4.17.0-rc6-00018-ga30e7d1e37e8
Machine Architecture: nds32
Total Tests: 1902
Total Skipped Tests: 593
Total Failures: 419
Kernel Version: 4.17.0-rc5-00018-g27288975a735
Machine Architecture: nds32
Signed-off-by: Greentime Hu <greentime@andestech.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (GNU/Linux)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=qlw2
-----END PGP SIGNATURE-----
Merge tag 'nds32-for-linus-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux
Pull nds32 fixes from Greentime Hu:
"Bug fixes and build error fixes for nds32"
* tag 'nds32-for-linus-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: Fix compiler warning, Wstringop-overflow, in vdso.c
nds32: Disable local irq before calling cpu_dcache_wb_page in copy_user_highpage
nds32: Flush the cache of the page at vmaddr instead of kaddr in flush_anon_page
nds32: Correct flush_dcache_page function
nds32: Fix the unaligned access handler
nds32: Renaming the file for unaligned access
nds32: To fix a cache inconsistency issue by setting correct cacheability of NTC
nds32: To refine readability of INT_MASK_INITAIAL_VAL
nds32: Fix the virtual address may map too much range by tlbop issue.
nds32: Fix the allmodconfig build. To make sure CONFIG_CPU_LITTLE_ENDIAN is default y
nds32: Fix build failed because arch_trace_hardirqs_off is changed to trace_hardirqs_off.
nds32: Fix the unknown type u8 issue.
nds32: Fix the symbols undefined issue by exporting them.
nds32: Fix xfs_buf built failed by export invalidate_kernel_vmap_range and flush_kernel_vmap_range
nds32: Fix drivers/gpu/drm/udl/udl_fb.c building error by defining PAGE_SHARED
nds32: Fix building error of crypto/xor.c by adding xor.h
nds32: Fix building error when CONFIG_FREEZE is enabled.
nds32: lib: To use generic lib instead of libgcc to prevent the symbol undefined issue.
If a instance has an event trigger enabled when it is freed, it could cause
an access of free memory. Here's the case that crashes:
# cd /sys/kernel/tracing
# mkdir instances/foo
# echo snapshot > instances/foo/events/initcall/initcall_start/trigger
# rmdir instances/foo
Would produce:
general protection fault: 0000 [#1] PREEMPT SMP PTI
Modules linked in: tun bridge ...
CPU: 5 PID: 6203 Comm: rmdir Tainted: G W 4.17.0-rc4-test+ #933
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
RIP: 0010:clear_event_triggers+0x3b/0x70
RSP: 0018:ffffc90003783de0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b2b RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800c7130ba0
RBP: ffffc90003783e00 R08: ffff8801131993f8 R09: 0000000100230016
R10: ffffc90003783d80 R11: 0000000000000000 R12: ffff8800c7130ba0
R13: ffff8800c7130bd8 R14: ffff8800cc093768 R15: 00000000ffffff9c
FS: 00007f6f4aa86700(0000) GS:ffff88011eb40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6f4a5aed60 CR3: 00000000cd552001 CR4: 00000000001606e0
Call Trace:
event_trace_del_tracer+0x2a/0xc5
instance_rmdir+0x15c/0x200
tracefs_syscall_rmdir+0x52/0x90
vfs_rmdir+0xdb/0x160
do_rmdir+0x16d/0x1c0
__x64_sys_rmdir+0x17/0x20
do_syscall_64+0x55/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This was due to the call the clears out the triggers when an instance is
being deleted not removing the trigger from the link list.
Cc: stable@vger.kernel.org
Fixes: 85f2b08268 ("tracing: Add basic event trigger framework")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- enable -fno-tree-loop-im only when supported
- add -fno-PIE option before the asm-goto test
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r3P/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- enable '-fno-tree-loop-im' only when supported
- add '-fno-PIE' option before the asm-goto test
* tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile: disable PIE before testing asm goto
kbuild: gcov: enable -fno-tree-loop-im if supported
In the case consumer device is runtime resumed, while the link to the
supplier is removed, the earlier call to pm_runtime_get_sync() made from
rpm_get_suppliers() does not get properly balanced with a corresponding
call to pm_runtime_put(). This leads to that suppliers remains to be
runtime resumed forever, while they don't need to.
Let's fix the behaviour by calling rpm_put_suppliers() when dropping a
device link. Not that, since rpm_put_suppliers() checks the
link->rpm_active flag, we can correctly avoid to call pm_runtime_put() in
cases when we shouldn't.
Reported-by: Todor Tomov <todor.tomov@linaro.org>
Fixes: 21d5c57b37 (PM / runtime: Use device links)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the driver core, before it invokes really_probe() it runtime resumes the
suppliers for the device via calling pm_runtime_get_suppliers(), which also
increases the runtime PM usage count for each of the available supplier.
This makes sense, as to be able to allow the consumer device to be probed
by its driver. However, if the driver decides to add a new supplier link
during ->probe(), hence updating the list of suppliers, the following call
to pm_runtime_put_suppliers(), invoked after really_probe() in the driver
core, we get into trouble.
More precisely, pm_runtime_put() gets called also for the new supplier(s),
which is wrong as the driver core, didn't trigger pm_runtime_get_sync() to
be called for it in the first place. In other words, the new supplier may
be runtime suspended even in cases when it shouldn't.
Fix this behaviour, by runtime resume suppliers according to the same
conditions as managed by the runtime PM core, when runtime resume callbacks
are being invoked.
Additionally, don't try to runtime suspend any of the suppliers after
really_probe(), but instead rely on that to happen via the consumer device,
when it becomes runtime suspended.
Fixes: 21d5c57b37 (PM / runtime: Use device links)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
general changes:
- make python dependent on version2 to enable clearlinux
- upgrade dmesg error/warning extraction to be more detailed
- enable logs generated from -cmd runs to be processed in gzip form
- add notification on power mode entry failure into the timeline
- add -battery option to show if battery is connected and its charge
summary changes (output of -summary):
- add -genhtml option to regenerate missing timelines from logs found
- add min/max/median/avg data to the summary page with links to the data
- add highlight to minimum, maximum, and median tests
- add result column to summary (pass or fail) with red highlight on fail
- add issues column to summary with a list of dmesg err/warn/bugs
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
syzbot is reporting NULL pointer dereference at snapshot_write() [1].
This is because data->handle is zero-cleared by ioctl(SNAPSHOT_FREE).
Fix this by checking data_of(data->handle) != NULL before using it.
[1] https://syzkaller.appspot.com/bug?id=828a3c71bd344a6de8b6a31233d51a72099f27fd
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+ae590932da6e45d6564d@syzkaller.appspotmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The `s2idle_lock' is acquired during suspend while interrupts are
disabled even on RT. The lock is acquired for short sections only.
Make it a RAW lock which avoids "sleeping while atomic" warnings on RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
s2idle_wait_head is used during s2idle with interrupts disabled even on
RT. There is no "custom" wake up function so swait could be used instead
which is also lower weight compared to the wait_queue.
Make s2idle_wait_head a swait_queue_head.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The `events_lock' is acquired during suspend while interrupts are
disabled even on RT. The lock is taken only for a very brief moment.
Make it a RAW lock which avoids "sleeping while atomic" warnings on RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
timekeeping suspend/resume calls read_persistent_clock() which takes
rtc_lock. That results in might sleep warnings because at that point
we run with interrupts disabled.
We cannot convert rtc_lock to a raw spinlock as that would trigger
other might sleep warnings.
As a workaround we disable the might sleep warnings by setting
system_state to SYSTEM_SUSPEND before calling sysdev_suspend() and
restoring it to SYSTEM_RUNNING afer sysdev_resume(). There is no lock
contention because hibernate / suspend to RAM is single-CPU at this
point.
In s2idle's case the system_state is set to SYSTEM_SUSPEND before
timekeeping_suspend() which is invoked by the last CPU. In the resume
case it set back to SYSTEM_RUNNING after timekeeping_resume() which is
invoked by the first CPU in the resume case. The other CPUs will block
on tick_freeze_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: cover s2idle in tick_freeze() / tick_unfreeze()]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A few more fixes for v4.17:
- A fix for a crash in scm_call_atomic on qcom platforms
- Display fix for Allwinner A10
- A fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al)
- A fix for eMMC corruption on hikey
- i2c-gpio descriptor tables for ixp4xx
+ a small typo fix
-----BEGIN PGP SIGNATURE-----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=mga+
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A few more fixes for v4.17:
- a fix for a crash in scm_call_atomic on qcom platforms
- display fix for Allwinner A10
- a fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al)
- a fix for eMMC corruption on hikey
- i2c-gpio descriptor tables for ixp4xx
... plus a small typo fix"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: Fix i2c-gpio GPIO descriptor tables
arm64: dts: hikey: Fix eMMC corruption regression
firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1()
ARM: sun8i: v3s: fix spelling mistake: "disbaled" -> "disabled"
ARM: dts: sun4i: Fix incorrect clocks for displays
ARM: dts: sun8i: h3: Re-enable EMAC on Orange Pi One
Pull x86 store buffer fixes from Thomas Gleixner:
"Two fixes for the SSBD mitigation code:
- expose SSBD properly to guests. This got broken when the CPU
feature flags got reshuffled.
- simplify the CPU detection logic to avoid duplicate entries in the
tables"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Simplify the CPU bug detection logic
KVM/VMX: Expose SSBD properly to guests
Pull scheduler fixes from Thomas Gleixner:
"Three fixes for scheduler and kthread code:
- allow calling kthread_park() on an already parked thread
- restore the sched_pi_setprio() tracepoint behaviour
- clarify the unclear string for the scheduling domain debug output"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched, tracing: Fix trace_sched_pi_setprio() for deboosting
kthread: Allow kthread_park() on a parked kthread
sched/topology: Clarify root domain(s) debug string
I used bad names in my clumsiness when rewriting many board
files to use GPIO descriptors instead of platform data. A few
had the platform_device ID set to -1 which would indeed give
the device name "i2c-gpio".
But several had it set to >=0 which gives the names
"i2c-gpio.0", "i2c-gpio.1" ...
Fix the offending instances in the ARM tree. Sorry for the
mess.
Fixes: b2e6355559 ("i2c: gpio: Convert to use descriptors")
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Reported-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
PPC:
- Close a hole which could possibly lead to the host timebase getting
out of sync.
- Three fixes relating to PTEs and TLB entries for radix guests.
- Fix a bug which could lead to an interrupt never getting delivered
to the guest, if it is pending for a guest vCPU when the vCPU gets
offlined.
s390:
- Fix false negatives in VSIE validity check (Cc stable)
x86:
- Fix time drift of VMX preemption timer when a guest uses LAPIC timer
in periodic mode (Cc stable)
- Unconditionally expose CPUID.IA32_ARCH_CAPABILITIES to allow
migration from hosts that don't need retpoline mitigation (Cc stable)
- Fix guest crashes on reboot by properly coupling CR4.OSXSAVE and
CPUID.OSXSAVE (Cc stable)
- Report correct RIP after Hyper-V hypercall #UD (introduced in -rc6)
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJbCXxHAAoJEED/6hsPKofon5oIAKTwpbpBi0UKIyYcHQ2pwIoP
+qITTZUGGhEaIfe+aDkzE4vxVIA2ywYCbaC2+OSy4gNVThnytRL8WuhLyV8WLmlC
sDVSQ87RWaN8mW6hEJ95qXMS7FS0TsDJdytaw+c8OpODrsykw1XMSyV2rMLb0sMT
SmfioO2kuDx5JQGyiAPKFFXKHjAnnkH+OtffNemAEHGoPpenJ4qLRuXvrjQU8XT6
tVARIBZsutee5ITIsBKVDmI2n98mUoIe9na21M7N2QaJ98IF+qRz5CxZyL1CgvFk
tHqG8PZ/bqhnmuIIR5Di919UmhamOC3MODsKUVeciBLDS6LHlhado+HEpj6B8mI=
=ygB7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"PPC:
- Close a hole which could possibly lead to the host timebase getting
out of sync.
- Three fixes relating to PTEs and TLB entries for radix guests.
- Fix a bug which could lead to an interrupt never getting delivered
to the guest, if it is pending for a guest vCPU when the vCPU gets
offlined.
s390:
- Fix false negatives in VSIE validity check (Cc stable)
x86:
- Fix time drift of VMX preemption timer when a guest uses LAPIC
timer in periodic mode (Cc stable)
- Unconditionally expose CPUID.IA32_ARCH_CAPABILITIES to allow
migration from hosts that don't need retpoline mitigation (Cc
stable)
- Fix guest crashes on reboot by properly coupling CR4.OSXSAVE and
CPUID.OSXSAVE (Cc stable)
- Report correct RIP after Hyper-V hypercall #UD (introduced in
-rc6)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: fix #UD address of failed Hyper-V hypercalls
kvm: x86: IA32_ARCH_CAPABILITIES is always supported
KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed
x86/kvm: fix LAPIC timer drift when guest uses periodic mode
KVM: s390: vsie: fix < 8k check for the itdba
KVM: PPC: Book 3S HV: Do ptesync in radix guest exit path
KVM: PPC: Book3S HV: XIVE: Resend re-routed interrupts on CPU priority change
KVM: PPC: Book3S HV: Make radix clear pte when unmapping
KVM: PPC: Book3S HV: Make radix use correct tlbie sequence in kvmppc_radix_tlbie_page
KVM: PPC: Book3S HV: Snapshot timebase offset on guest entry
This patch is a partial revert of
commit abd7d0972a ("arm64: dts: hikey: Enable HS200 mode on eMMC")
which has been causing eMMC corruption on my HiKey board.
Symptoms usually looked like:
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
...
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc0: new HS200 MMC card at address 0001
...
dwmmc_k3 f723d000.dwmmc0: Unexpected command timeout, state 3
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
print_req_error: I/O error, dev mmcblk0, sector 8810504
Aborting journal on device mmcblk0p10-8.
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
EXT4-fs error (device mmcblk0p10): ext4_journal_check_start:61: Detected aborted journal
EXT4-fs (mmcblk0p10): Remounting filesystem read-only
And quite often this would result in a disk that wouldn't properly
boot even with older kernels.
It seems the max-frequency property added by the above patch is
causing the problem, so remove it.
Cc: Ryan Grachek <ryan@edited.us>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei04@gmail.com>
This patch fixes the Inside Secure driver which uses a memtset() call to
set an MMIO area from the cryptographic engine to 0. This is wrong as
memset() isn't guaranteed to work on MMIO for many reasons. This led to
kernel paging request panics in certain cases. Use memset_io() instead.
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Reported-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: fix memory hotplug during boot
kasan: free allocated shadow memory on MEM_CANCEL_ONLINE
checkpatch: fix macro argument precedence test
init/main.c: include <linux/mem_encrypt.h>
kernel/sys.c: fix potential Spectre v1 issue
mm/memory_hotplug: fix leftover use of struct page during hotplug
proc: fix smaps and meminfo alignment
mm: do not warn on offline nodes unless the specific node is explicitly requested
mm, memory_hotplug: make has_unmovable_pages more robust
mm/kasan: don't vfree() nonexistent vm_area
MAINTAINERS: change hugetlbfs maintainer and update files
ipc/shm: fix shmat() nil address after round-down when remapping
Revert "ipc/shm: Fix shmat mmap nil-page protection"
idr: fix invalid ptr dereference on item delete
ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio"
mm: fix nr_rotate_swap leak in swapon() error case
Pull networking fixes from David Miller:
"Let's begin the holiday weekend with some networking fixes:
1) Whoops need to restrict cfg80211 wiphy names even more to 64
bytes. From Eric Biggers.
2) Fix flags being ignored when using kernel_connect() with SCTP,
from Xin Long.
3) Use after free in DCCP, from Alexey Kodanev.
4) Need to check rhltable_init() return value in ipmr code, from Eric
Dumazet.
5) XDP handling fixes in virtio_net from Jason Wang.
6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu.
7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack
Morgenstein.
8) Prevent out-of-bounds speculation using indexes in BPF, from
Daniel Borkmann.
9) Fix regression added by AF_PACKET link layer cure, from Willem de
Bruijn.
10) Correct ENIC dma mask, from Govindarajulu Varadarajan.
11) Missing config options for PMTU tests, from Stefano Brivio"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
ibmvnic: Fix partial success login retries
selftests/net: Add missing config options for PMTU tests
mlx4_core: allocate ICM memory in page size chunks
enic: set DMA mask to 47 bit
ppp: remove the PPPIOCDETACH ioctl
ipv4: remove warning in ip_recv_error
net : sched: cls_api: deal with egdev path only if needed
vhost: synchronize IOTLB message with dev cleanup
packet: fix reserve calculation
net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
bpf: properly enforce index mask to prevent out-of-bounds speculation
net/mlx4: Fix irq-unsafe spinlock usage
net: phy: broadcom: Fix bcm_write_exp()
net: phy: broadcom: Fix auxiliary control register reads
net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy
net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message
ibmvnic: Only do H_EOI for mobility events
tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
virtio-net: fix leaking page for gso packet during mergeable XDP
...
Using module_init() is wrong. E.g. ACPI adds and onlines memory before
our memory notifier gets registered.
This makes sure that ACPI memory detected during boot up will not result
in a kernel crash.
Easily reproducible with QEMU, just specify a DIMM when starting up.
Link: http://lkml.kernel.org/r/20180522100756.18478-3-david@redhat.com
Fixes: 786a895991 ("kasan: disable memory hotplug")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have to free memory again when we cancel onlining, otherwise a later
onlining attempt will fail.
Link: http://lkml.kernel.org/r/20180522100756.18478-2-david@redhat.com
Fixes: fa69b5989b ("mm/kasan: add support for memory hotplug")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit c7753208a9 ("x86, swiotlb: Add memory encryption support") a
call to function `mem_encrypt_init' was added. Include prototype
defined in header <linux/mem_encrypt.h> to prevent a warning reported
during compilation with W=1:
init/main.c:494:20: warning: no previous prototype for `mem_encrypt_init' [-Wmissing-prototypes]
Link: http://lkml.kernel.org/r/20180522195533.31415-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Gargi Sharma <gs051095@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
`resource' can be controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)
kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)
Fix this by sanitizing *resource* before using it to index
current->signal->rlim
Notice that given that speculation windows are large, the policy is to
kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.com
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The case of a new numa node got missed in avoiding using the node info
from page_struct during hotplug. In this path we have a call to
register_mem_sect_under_node (which allows us to specify it is hotplug
so don't change the node), via link_mem_sections which unfortunately
does not.
Fix is to pass check_nid through link_mem_sections as well and disable
it in the new numa node path.
Note the bug only 'sometimes' manifests depending on what happens to be
in the struct page structures - there are lots of them and it only needs
to match one of them.
The result of the bug is that (with a new memory only node) we never
successfully call register_mem_sect_under_node so don't get the memory
associated with the node in sysfs and meminfo for the node doesn't
report it.
It came up whilst testing some arm64 hotplug patches, but appears to be
universal. Whilst I'm triggering it by removing then reinserting memory
to a node with no other elements (thus making the node disappear then
appear again), it appears it would happen on hotplugging memory where
there was none before and it doesn't seem to be related the arm64
patches.
These patches call __add_pages (where most of the issue was fixed by
Pavel's patch). If there is a node at the time of the __add_pages call
then all is well as it calls register_mem_sect_under_node from there
with check_nid set to false. Without a node that function returns
having not done the sysfs related stuff as there is no node to use.
This is expected but it is the resulting path that fails...
Exact path to the problem is as follows:
mm/memory_hotplug.c: add_memory_resource()
The node is not online so we enter the 'if (new_node)' twice, on the
second such block there is a call to link_mem_sections which calls
into
drivers/node.c: link_mem_sections() which calls
drivers/node.c: register_mem_sect_under_node() which calls
get_nid_for_pfn and keeps trying until the output of that matches
the expected node (passed all the way down from
add_memory_resource)
It is effectively the same fix as the one referred to in the fixes tag
just in the code path for a new node where the comments point out we
have to rerun the link creation because it will have failed in
register_new_memory (as there was no node at the time). (actually that
comment is wrong now as we don't have register_new_memory any more it
got renamed to hotplug_memory_register in Pavel's patch).
Link: http://lkml.kernel.org/r/20180504085311.1240-1-Jonathan.Cameron@huawei.com
Fixes: fc44f7f923 ("mm/memory_hotplug: don't read nid from struct page during hotplug")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 4.17-rc /proc/meminfo and /proc/<pid>/smaps look ugly: single-digit
numbers (commonly 0) are misaligned.
Remove seq_put_decimal_ull_width()'s leftover optimization for single
digits: it's wrong now that num_to_str() takes care of the width.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805241554210.1326@eggly.anvils
Fixes: d1be35cb6f ("proc: add seq_put_decimal_ull_width to speed up /proc/pid/smaps")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oscar has noticed that we splat
WARNING: CPU: 0 PID: 64 at ./include/linux/gfp.h:467 vmemmap_alloc_block+0x4e/0xc9
[...]
CPU: 0 PID: 64 Comm: kworker/u4:1 Tainted: G W E 4.17.0-rc5-next-20180517-1-default+ #66
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
Call Trace:
vmemmap_populate+0xf2/0x2ae
sparse_mem_map_populate+0x28/0x35
sparse_add_one_section+0x4c/0x187
__add_pages+0xe7/0x1a0
add_pages+0x16/0x70
add_memory_resource+0xa3/0x1d0
add_memory+0xe4/0x110
acpi_memory_device_add+0x134/0x2e0
acpi_bus_attach+0xd9/0x190
acpi_bus_scan+0x37/0x70
acpi_device_hotplug+0x389/0x4e0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x146/0x340
worker_thread+0x47/0x3e0
kthread+0xf5/0x130
ret_from_fork+0x35/0x40
when adding memory to a node that is currently offline.
The VM_WARN_ON is just too loud without a good reason. In this
particular case we are doing
alloc_pages_node(node, GFP_KERNEL|__GFP_RETRY_MAYFAIL|__GFP_NOWARN, order)
so we do not insist on allocating from the given node (it is more a
hint) so we can fall back to any other populated node and moreover we
explicitly ask to not warn for the allocation failure.
Soften the warning only to cases when somebody asks for the given node
explicitly by __GFP_THISNODE.
Link: http://lkml.kernel.org/r/20180523125555.30039-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Oscar Salvador <osalvador@techadventures.net>
Tested-by: Oscar Salvador <osalvador@techadventures.net>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
