1. make messages grepable (in one line)
2. include returned errno in them
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Route all buffer writes through the demux.
Addition or removal of a buffer results in tear down and
setup of all the buffers for a given device.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tested-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
strict_strto* has been deprecated in favor of kstrto*. Use strict_strtouint
respective strict_strtoint, since that is what the functions we pass the
converted values to expect.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Drop timestamp parameter from buffer store_to callback and subsequently from
iio_push_to_buffer. The timestamp parameter is unused and it seems likely that
it will stay unused in the future, so it should be safe to remove it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=5L5b
-----END PGP SIGNATURE-----
Merge tag 'togreg-3.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
IIO: One new driver and a couple of nice cleanups.
Add a helper function for validating a scan mask for devices where exactly one
channel must be selected during sampling. This is a common case among devices
which have scan mask restrictions so it makes sense to provide this function in
the core.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This is useful for cases where the number of valid scan masks grows
exponentially, but it is rather easy to check whether a mask is valid or not
programmatically.
An example of such a case is a device with multiple ADCs where each ADC has a
upstream MUX, which allows to select from a number of physical channels.
+-------+ +-------+
| | | | --- Channel 1
| ADC 1 |---| MUX 1 | --- ...
| | | | --- Channel M
+-------+ +-------+
. . .
. . .
. . .
+-------+ +-------+
| | | | --- Channel M * N + 1
| ADC N |---| MUX N | --- ...
| | | | --- Channel M * N + M
+-------+ +-------+
The number of necessary scan masks for this case is (M+1)**N - 1, on the other
hand it is easy to check whether subsets for each ADC of the scanmask have only
one bit set.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The channel set assigned to the iio device is not necessarily the same has the
channel set passed to iio_buffer_register. So to avoid possible complications
always work with the channel set pass to iio_buffer_register and ignore the
channel set assigned to the iio device.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
It is not always the case that all channels can be used in buffered mode. This
patch allows channels, which can not be used in buffered mode, to set their scan
index to a negative number, which will cause iio_buffer_register to ignore the
channel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio_scan_mask_match() returns NULL if the passed in scan mask is empty. This
will happen if no channel has been selected and buffer is enabled.
iio_sw_buffer_preenable() will assign NULL to indio_dev->active_scan_mask in
this case. As a result iio_update_demux() will cause a NULL pointer deref,
because it expects active_scan_mask to be non-NULL.
Since it does not make much sense to start data capture if there is no data to
capture this patch updates the code to fail gracefully in iio_scan_mask_match()
instead of crashing the kernel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take the core support + the kfifo buffer implentation out of
staging. Whilst we are far from done in improving this subsystem
it is now at a stage where the userspae interfaces (provided by
the core) can be considered stable.
Drivers will follow over a longer time scale.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
