After ext3-ordered files are truncated, there is a possibility that the
pages which cannot be estimated still remain. Remaining pages can be
released when the system has really few memory. So, it is not memory
leakage. But the resource management software etc. may not work
correctly.
It is possible that journal_unmap_buffer() cannot release the buffers, and
the pages to which they belong because they are attached to a commiting
transaction and journal_unmap_buffer() cannot release them. To release
such the buffers and the pages later, journal_unmap_buffer() leaves it to
journal_commit_transaction(). (journal_unmap_buffer() puts the mark
'BH_Freed' to the buffers so that journal_commit_transaction() can
identify whether they can be released or not.)
In the journalled mode and the writeback mode, jbd does with only metadata
buffers. But in the ordered mode, jbd does with metadata buffers and also
data buffers.
Actually, journal_commit_transaction() releases only the metadata buffers
of which release is demanded by journal_unmap_buffer(), and also releases
the pages to which they belong if possible.
As a result, the data buffers of which release is demanded by
journal_unmap_buffer() remain after a transaction commits. And also the
pages to which they belong remain.
Such the remained pages don't have mapping any longer. Due to this fact,
there is a possibility that the pages which cannot be estimated remain.
The metadata buffers marked 'BH_Freed' and the pages to which
they belong can be released at 'JBD: commit phase 7'.
Therefore, by applying the same code into 'JBD: commit phase 2' (where the
data buffers are done with), journal_commit_transaction() can also release
the data buffers marked 'BH_Freed' and the pages to which they belong.
As a result, all the buffers marked 'BH_Freed' can be released, and also
all the pages to which these buffers belong can be released at
journal_commit_transaction(). So, the page which cannot be estimated is
lost.
<<Excerpt of code at 'JBD: commit phase 7'>>
> spin_lock(&journal->j_list_lock);
> while (commit_transaction->t_forget) {
> transaction_t *cp_transaction;
> struct buffer_head *bh;
>
> jh = commit_transaction->t_forget;
>...
> if (buffer_freed(bh)) {
> ^^^^^^^^^^^^^^^^^^^^^^^^
> clear_buffer_freed(bh);
> ^^^^^^^^^^^^^^^^^^^^^^^^
> clear_buffer_jbddirty(bh);
> }
>
> if (buffer_jbddirty(bh)) {
> JBUFFER_TRACE(jh, "add to new checkpointing trans");
> __journal_insert_checkpoint(jh, commit_transaction);
> JBUFFER_TRACE(jh, "refile for checkpoint writeback");
> __journal_refile_buffer(jh);
> jbd_unlock_bh_state(bh);
> } else {
> J_ASSERT_BH(bh, !buffer_dirty(bh));
> ...
> JBUFFER_TRACE(jh, "refile or unfile freed buffer");
> __journal_refile_buffer(jh);
> if (!jh->b_transaction) {
> jbd_unlock_bh_state(bh);
> /* needs a brelse */
> journal_remove_journal_head(bh);
> release_buffer_page(bh);
> ^^^^^^^^^^^^^^^^^^^^^^^^
> } else
> }
****************************************************************
* Apply the code of "^^^^^^" lines into 'JBD: commit phase 2' *
****************************************************************
At journal_commit_transaction() code, there is one extra message in the
series of jbd debug messages. ("JBD: commit phase 2") This patch fixes
it, too.
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
journal_try_to_free_buffers() could race with jbd commit transaction when
the later is holding the buffer reference while waiting for the data
buffer to flush to disk. If the caller of journal_try_to_free_buffers()
request tries hard to release the buffers, it will treat the failure as
error and return back to the caller. We have seen the directo IO failed
due to this race. Some of the caller of releasepage() also expecting the
buffer to be dropped when passed with GFP_KERNEL mask to the
releasepage()->journal_try_to_free_buffers().
With this patch, if the caller is passing the __GFP_WAIT and __GFP_FS to
indicating this call could wait, in case of try_to_free_buffers() failed,
let's waiting for journal_commit_transaction() to finish commit the
current committing transaction, then try to free those buffers again.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make revocation cache destruction safe to call if initialisation fails
partially or entirely. This allows it to be used to cleanup in the case
of initialisation failure, simplifying that code slightly.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The revocation table initialisation/destruction code is repeated for each
of the two revocation tables stored in the journal. Refactoring the
duplicated code into functions is tidier, simplifies the logic in
initialisation in particular, and slightly reduces the code size.
There should not be any functional change.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If an error occurs during jbd cache initialisation it is possible for the
journal_head_cache to be NULL when journal_destroy_journal_head_cache is
called. Replace the J_ASSERT with an if block to handle the situation
correctly.
Note that even with this fix things will break badly if jbd is statically
compiled in and cache initialisation fails.
Signed-off-by: Duane Griffin <duaneg@dghda.com
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Updating the current transaction's t_state is protected by j_state_lock. We
need to do the same when updating the t_state to T_COMMIT.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Acked-by: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are several cases where the running transaction can get buffers added to
its BJ_Metadata list which it never dirtied, which makes its t_nr_buffers
counter end up larger than its t_outstanding_credits counter.
This will cause issues when starting new transactions as while we are logging
buffers we decrement t_outstanding_buffers, so when t_outstanding_buffers goes
negative, we will report that we need less space in the journal than we
actually need, so transactions will be started even though there may not be
enough room for them. In the worst case scenario (which admittedly is almost
impossible to reproduce) this will result in the journal running out of space.
The fix is to only
refile buffers from the committing transaction to the running transactions
BJ_Modified list when b_modified is set on that journal, which is the only way
to be sure if the running transaction has modified that buffer.
This patch also fixes an accounting error in journal_forget, it is possible
that we can call journal_forget on a buffer without having modified it, only
gotten write access to it, so instead of freeing a credit, we only do so if
the buffer was modified. The assert will help catch if this problem occurs.
Without these two patches I could hit this assert within minutes of running
postmark, with them this issue no longer arises. Thank you,
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently at the start of a journal commit we loop through all of the buffers
on the committing transaction and clear the b_modified flag (the flag that is
set when a transaction modifies the buffer) under the j_list_lock.
The problem is that everywhere else this flag is modified only under the jbd
lock buffer flag, so it will race with a running transaction who could
potentially set it, and have it unset by the committing transaction.
This is also a big waste, you can have several thousands of buffers that you
are clearing the modified flag on when you may not need to. This patch
removes this code and instead clears the b_modified flag upon entering
do_get_write_access/journal_get_create_access, so if that transaction does
indeed use the buffer then it will be accounted for properly, and if it does
not then we know we didn't use it.
That will be important for the next patch in this series. Tested thoroughly
by myself using postmark/iozone/bonnie++.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc notation warnings in fs/.
Warning(mmotm-2008-0314-1449//fs/super.c:560): missing initial short description on line:
* mark_files_ro
Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line:
* lease_get_mtime
Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line:
* lease_get_mtime
Warning(mmotm-2008-0314-1449//fs/namei.c:1368): missing initial short description on line:
* lookup_one_len: filesystem helper to lookup single pathname component
Warning(mmotm-2008-0314-1449//fs/buffer.c:3221): missing initial short description on line:
* bh_uptodate_or_lock: Test whether the buffer is uptodate
Warning(mmotm-2008-0314-1449//fs/buffer.c:3240): missing initial short description on line:
* bh_submit_read: Submit a locked buffer for reading
Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:30): missing initial short description on line:
* writeback_acquire: attempt to get exclusive writeback access to a device
Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:47): missing initial short description on line:
* writeback_in_progress: determine whether there is writeback in progress
Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:58): missing initial short description on line:
* writeback_release: relinquish exclusive writeback access against a device.
Warning(mmotm-2008-0314-1449//include/linux/jbd.h:351): contents before sections
Warning(mmotm-2008-0314-1449//include/linux/jbd.h:561): contents before sections
Warning(mmotm-2008-0314-1449//fs/jbd/transaction.c:1935): missing initial short description on line:
* void journal_invalidatepage()
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a long-standing typo (predating git) that will cause data corruption if a
journal data block needs unescaping. At the moment the wrong buffer head's
data is being unescaped.
To test this case mount a filesystem with data=journal, start creating and
deleting a bunch of files containing only JFS_MAGIC_NUMBER (0xc03b3998), then
pull the plug on the device. Without this patch the files will contain zeros
instead of the correct data after recovery.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix docbook problems in filesystems.tmpl.
These cause the generated docbook to be incorrect.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit block was intended to have several copies of the header. But
due to a bug it never had them and actually, nobody checks that. So
just remove the useless loop.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some devices - notably dm and md - can change their behaviour in response
to BIO_RW_BARRIER requests. They might start out accepting such requests
but on reconfiguration, they find out that they cannot any more.
ext3 (and other filesystems) deal with this by always testing if
BIO_RW_BARRIER requests fail with EOPNOTSUPP, and retrying the write
requests without the barrier (probably after waiting for any pending writes
to complete).
However there is a bug in the handling for this for ext3.
When ext3 (jbd actually) decides to submit a BIO_RW_BARRIER request, it
sets the buffer_ordered flag on the buffer head. If the request completes
successfully, the flag STAYS SET.
Other code might then write the same buffer_head after the device has been
reconfigured to not accept barriers. This write will then fail, but the
"other code" is not ready to handle EOPNOTSUPP errors and the error will be
treated as fatal.
This can be seen without having to reconfigure a device at exactly the
wrong time by putting:
if (buffer_ordered(bh))
printk("OH DEAR, and ordered buffer\n");
in the while loop in "commit phase 5" of journal_commit_transaction.
If it ever prints the "OH DEAR ..." message (as it does sometimes for
me), then that request could (in different circumstances) have failed
with EOPNOTSUPP, but that isn't tested for.
My proposed fix is to clear the buffer_ordered flag after it has been
used, as in the following patch.
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__journal_abort_hard() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
None of the callers of this function does actually take the BKL as far as I
can see. So remove the comment refering to the BKL.
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: <linux-ext4@vger.kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The break_lock data structure and code for spinlocks is quite nasty.
Not only does it double the size of a spinlock but it changes locking to
a potentially less optimal trylock.
Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a
__raw_spin_is_contended that uses the lock data itself to determine whether
there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is
not set.
Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to
decouple it from the spinlock implementation, and make it typesafe (rwlocks
do not have any need_lockbreak sites -- why do they even get bloated up
with that break_lock then?).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Before we start committing a transaction, we call
__journal_clean_checkpoint_list() to cleanup transaction's written-back
buffers.
If this call happens to remove all of them (and there were already some
buffers), __journal_remove_checkpoint() will decide to free the transaction
because it isn't (yet) a committing transaction and soon we fail some
assertion - the transaction really isn't ready to be freed :).
We change the check in __journal_remove_checkpoint() to free only a
transaction in T_FINISHED state. The locking there is subtle though (as
everywhere in JBD ;(). We use j_list_lock to protect the check and a
subsequent call to __journal_drop_transaction() and do the same in the end
of journal_commit_transaction() which is the only place where a transaction
can get to T_FINISHED state.
Probably I'm too paranoid here and such locking is not really necessary -
checkpoint lists are processed only from log_do_checkpoint() where a
transaction must be already committed to be processed or from
__journal_clean_checkpoint_list() where kjournald itself calls it and thus
transaction cannot change state either. Better be safe if something
changes in future...
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Note from Mingming's JBD2 fix:
Noticed all warnings are occurs when the debug level is 0. Then found the
"jbd2: Move jbd2-debug file to debugfs" patch
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0f49d5d019afa4e94253bfc92f0daca3badb990b
changed the jbd2_journal_enable_debug from int type to u8, makes the
jbd_debug comparision is always true when the debugging level is 0. Thus
the compile warning occurs.
Thought about changing the jbd2_journal_enable_debug data type back to int,
but can't, because the jbd2-debug is moved to debug fs, where calling
debugfs_create_u8() to create the debugfs entry needs the value to be u8
type.
Even if we changed the data type back to int, the code is still buggy,
kernel should not print jbd2 debug message if the jbd2_journal_enable_debug
is set to 0. But this is not the case.
The fix is change the level of debugging to 1. The same should fixed in
ext3/JBD, but currently ext3 jbd-debug via /proc fs is broken, so we
probably should fix it all together.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should really call journal_abort() and not __journal_abort_hard() in
case of errors. The latter call does not record the error in the journal
superblock and thus filesystem won't be marked as with errors later (and
user could happily mount it without any warning).
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The jbd-debug file used to be located in /proc/sys/fs/jbd-debug, but
create_proc_entry() does not do lookups on file names that are more that
one directory deep. This causes the entry creation to fail and hence, no
proc file is created.
Instead of fixing this on procfs might as well move the jbd2-debug file to
debugfs which would be the preferred location for this kind of tunable.
The new location is now /sys/kernel/debug/jbd/jbd-debug.
[akpm@linux-foundation.org: zillions of cleanups]
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert kmalloc to kzalloc() and get rid of the memset().
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Get rid of sparse related warnings from places that use integer as NULL
pointer.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
JBD: Replace slab allocations with page allocations
JBD allocate memory for committed_data and frozen_data from slab. However
JBD should not pass slab pages down to the block layer. Use page allocator pages instead. This will also prepare JBD for the large blocksize patchset.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
This patch marks a number of allocations that are either short-lived such as
network buffers or are reclaimable such as inode allocations. When something
like updatedb is called, long-lived and unmovable kernel allocations tend to
be spread throughout the address space which increases fragmentation.
This patch groups these allocations together as much as possible by adding a
new MIGRATE_TYPE. The MIGRATE_RECLAIMABLE type is for allocations that can be
reclaimed on demand, but not moved. i.e. they can be migrated by deleting
them and re-reading the information from elsewhere.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On Fri, 2007-07-13 at 02:05 -0700, Andrew Morton wrote:
> Except lockdep doesn't know about journal_start(), which has ranking
> requirements similar to a semaphore.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Replace (n & (n-1)) in the context of power of 2 checks with
is_power_of_2().
Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have to check that also the second checkpoint list is non-empty before
dropping the transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many files include the filename at the beginning, serveral used a wrong one.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
If the thread failed to create the subsequent wait_event will hang forever.
This is likely to happen if kernel hits max_threads limit.
Will be critical for virtualization systems that limit the number of tasks
and kernel memory usage within the container.
(akpm: JBD should be converted fully to the kthread API: kthread_should_stop()
and kthread_stop()).
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.
Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the current jbd code, if a buffer on BJ_SyncData list is dirty and not
locked, the buffer is refiled to BJ_Locked list, submitted to the IO and
waited for IO completion.
But the fsstress test showed the case that when a buffer was already
submitted to the IO just before the buffer_dirty(bh) check, the buffer was
not waited for IO completion.
Following patch solves this problem. If it is assumed that a buffer is
submitted to the IO before the buffer_dirty(bh) check and still being
written to disk, this buffer is refiled to BJ_Locked list.
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Jan Kara <jack@ucw.cz>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch introduces a user: of the round_jiffies() function; the "5 second"
ext3/jbd wakeup.
While "every 5 seconds" doesn't sound as a problem, there can be many of these
(and these timers do add up over all the kernel). The "5 second" wakeup isn't
really timing sensitive; in addition even with rounding it'll still happen
every 5 seconds (with the exception of the very first time, which is likely to
be rounded up to somewhere closer to 6 seconds)
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.
[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace all uses of kmem_cache_t with struct kmem_cache.
The patch was generated using the following script:
#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#
set -e
for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done
The script was run like this
sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When running several fsx's and other filesystem stress tests, we found
cases where an unmapped buffer was still being sent to submit_bh by the
ext3 dirty data journaling code.
I saw this happen in two ways, both related to another thread doing a
truncate which would unmap the buffer in question.
Either we would get into journal_dirty_data with a bh which was already
unmapped (although journal_dirty_data_fn had checked for this earlier, the
state was not locked at that point), or it would get unmapped in the middle
of journal_dirty_data when we dropped locks to call sync_dirty_buffer.
By re-checking for mapped state after we've acquired the bh state lock, we
should avoid these races. If we find a buffer which is no longer mapped,
we essentially ignore it, because journal_unmap_buffer has already decided
that this buffer can go away.
I've also added tracepoints in these two cases, and made a couple other
tracepoint changes that I found useful in debugging this.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A disk generated some I/O error, after it, I hitted
J_ASSERT(transaction->t_updates > 0) in journal_stop().
It seems to happened on ext3_truncate() path from stack trace. Then,
maybe the following case may trigger J_ASSERT(transaction->t_updates > 0).
ext3_truncate()
-> ext3_free_branches()
-> ext3_journal_test_restart()
-> ext3_journal_restart()
-> journal_restart()
transaction->t_updates--;
/* another process aborted journal */
-> start_this_handle()
returns -EROFS without transaction->t_updates++;
-> ext3_journal_stop()
-> journal_stop()
J_ASSERT(transaction->t_updates > 0)
If journal was aborted in middle of journal_restart(), ext3_truncate()
may trigger J_ASSERT().
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since commit d1807793e1 we dereference a NULL
pointer. Coverity id #1432. We set journal to NULL, and use it directly
afterwards.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Many files include the filename at the beginning, serveral used a wrong one.
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
We leak a bh ref in "journal_init_dev()" in case of failure.
Signed-off-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It's always good to make symbols static when we can, and this also eliminates
the need to rename the function in jbd2
Suggested by Eric Sandeen.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixing up some endian-ness warnings in preparation to clone ext4 from ext3.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
More white space cleanups in preparation of cloning ext4 from ext3.
Removing spaces that precede a tab.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
These are a few places I've found in jbd that look like they may not be
16T-safe, or consistent with the use of unsigned longs for block
containers. Problems here would be somewhat hard to hit, would require
journal blocks past the 8T boundary, which would not be terribly common.
Still, should fix.
(some of these have come from the ext4 work on jbd as well).
I think there's one more possibility that the wrap() function may not be
safe IF your last block in the journal butts right up against the 232 block
boundary, but that seems like a VERY remote possibility, and I'm not
worrying about it at this point.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove whitespace from ext3 and jbd, before we clone ext4.
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
jbd_sync_bh releases journal->j_list_lock. Add a lock annotation to this
function so that sparse can check callers for lock pairing, and so that
sparse will not complain about this function since it intentionally uses
the lock in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Original commit code assumes, that when a buffer on BJ_SyncData list is
locked, it is being written to disk. But this is not true and hence it can
lead to a potential data loss on crash. Also the code didn't count with
the fact that journal_dirty_data() can steal buffers from committing
transaction and hence could write buffers that no longer belong to the
committing transaction. Finally it could possibly happen that we tried
writing out one buffer several times.
The patch below tries to solve these problems by a complete rewrite of the
data commit code. We go through buffers on t_sync_datalist, lock buffers
needing write out and store them in an array. Buffers are also immediately
refiled to BJ_Locked list or unfiled (if the write out is completed). When
the array is full or we have to block on buffer lock, we submit all
accumulated buffers for IO.
[suitable for 2.6.18.x around the 2.6.19-rc2 timeframe]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Missed a place where I forgot to convert kfree() to kmem_cache_free() as
part of jbd-manage-its-own-slab changes.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
JBD currently allocates commit and frozen buffers from slabs. With
CONFIG_SLAB_DEBUG, its possible for an allocation to cross the page
boundary causing IO problems.
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=200127
So, instead of allocating these from regular slabs - manage allocation from
its own slabs and disable slab debug for these slabs.
[akpm@osdl.org: cleanups]
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Localize poison values into one header file for better documentation and
easier/quicker debugging and so that the same values won't be used for
multiple purposes.
Use these constants in core arch., mm, driver, and fs code.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Matt Mackall <mpm@selenic.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Split the checkpoint list of the transaction into two lists. In the first
list we keep the buffers that need to be submitted for IO. In the second
list are kept buffers that were already submitted and we just have to wait
for the IO to complete. This should simplify a handling of checkpoint
lists a bit and can eventually be also a performance gain.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There are a couple of places where JBD has to check to see whether an unneeded
memory allocation was performed. Usually it _was_ needed, so we end up
calling kfree(NULL). We can micro-optimise that by checking the pointer
before calling kfree().
Thanks to Steven Rostedt <rostedt@goodmis.org> for identifying this.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix possible assertion failure in journal_commit_transaction() on
jh->b_next_transaction == NULL (when we are processing BJ_Forget list and
buffer is not jbddirty).
!jbddirty buffers can be placed on BJ_Forget list for example by
journal_forget() or by __dispose_buffer() - generally such buffer means
that it has been freed by this transaction.
Freed buffers should not be reallocated until the transaction has committed
(that's why we have the assertion there) but they *can* be reallocated when
the transaction has already been committed to disk and we are just
processing the BJ_Forget list (as soon as we remove b_committed_data from
the bitmap bh, ext3 will be able to reallocate buffers freed by the
committing transaction). So we have to also count with the case that the
buffer has been reallocated and b_next_transaction has been already set.
And one more subtle point: it can happen that we manage to reallocate the
buffer and also mark it jbddirty. Then we also add the freed buffer to the
checkpoint list of the committing trasaction. But that should do no harm.
Non-jbddirty buffers should be filed to BJ_Reserved and not BJ_Metadata
list. It can actually happen that we refile such buffers during the commit
phase when we reallocate in the running transaction blocks deleted in
committing transaction (and that can happen if the committing transaction
already wrote all the data and is just cleaning up BJ_Forget list).
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The return value of this function is never used, so let's be honest and
declare it as void.
Some places where invalidatepage returned 0, I have inserted comments
suggesting a BUG_ON.
[akpm@osdl.org: JBD BUG fix]
[akpm@osdl.org: rework for git-nfs]
[akpm@osdl.org: don't go BUG in block_invalidate_page()]
Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The kjournald timer is currently on the kernel thread's stack and the journal
structure points at it. Save a pointer hop by moving the timer into the
journal structure.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch reverts commit f93ea411b7:
[PATCH] jbd: split checkpoint lists
This broke journal_flush() for OCFS2, which is its method of being sure
that metadata is sent to disk for another node.
And two related commits 8d3c7fce2d and
43c3e6f5ab with the subjects:
[PATCH] jbd: log_do_checkpoint fix
[PATCH] jbd: remove_transaction fix
These seem to be incremental bugfixes on the original patch and as such are
no longer needed.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ben points out that:
When writing files out using O_SYNC, jbd's 1 jiffy delay results in a
significant drop in throughput as the disk sits idle. The patch below
results in a 4-5x performance improvement (from 6.5MB/s to ~24-30MB/s on my
IDE test box) when writing out files using O_SYNC.
So optimise the batching code by omitting it entirely if the process which is
doing a sync write is the same as the one which did the most recent sync
write. If that's true, we're unlikely to get any other processes joining the
transaction.
(Has been in -mm for ages - it took me a long time to get on to performance
testing it)
Numbers, on write-cache-disabled IDE:
/usr/bin/time -p synctest -n 10 -uf -t 1 -p 1 dir-name
Unpatched:
40 seconds
Patched:
35 seconds
Batching disabled:
35 seconds
This is the problematic single-process-doing-fsync case. With multiple
fsyncing processes the numbers are AFACIT unaltered by the patch.
Aside: performance testing and instrumentation shows that the transaction
batching almost doesn't help (testing with synctest -n 1 -uf -t 100 -p 10
dir-name on non-writeback-caching IDE). This is because by the time one
process is running a synchronous commit, a bunch of other processes already
have a transaction handle open, so they're all going to batch into the same
transaction anyway.
The batching seems to offer maybe 5-10% speedup with this workload, but I'm
pretty sure it was more important than that when it was first developed 4-odd
years ago...
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We have to check that also the second checkpoint list is non-empty before
dropping the transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
While checkpointing we have to check that our transaction still is in the
checkpoint list *and* (not or) that it's not just a different transaction
with the same address.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Split the checkpoint list of the transaction into two lists. In the first
list we keep the buffers that need to be submitted for IO. In the second
list are kept buffers that were already submitted and we just have to wait
for the IO to complete. This should simplify a handling of checkpoint
lists a bit and can eventually be also a performance gain.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is the fs/ part of the big kfree cleanup patch.
Remove pointless checks for NULL prior to calling kfree() in fs/.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add structure fields kernel-doc for 2 fields in struct journal_s.
Warning(/var/linsrc/linux-2614-rc4//include/linux/jbd.h:808): No description found for parameter 'j_wbuf'
Warning(/var/linsrc/linux-2614-rc4//include/linux/jbd.h:808): No description found for parameter 'j_wbufsize'
Convert fs/jbd/recovery.c non-static functions to kernel-doc format.
fs/jbd/recovery.c doesn't export any symbols, so it should use
!I instead of !E to eliminate this warning message:
Warning(/var/linsrc/linux-2614-rc4//fs/jbd/recovery.c): no structured comments found
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- ->releasepage() annotated (s/int/gfp_t), instances updated
- missing gfp_t in fs/* added
- fixed misannotation from the original sweep caught by bitwise checks:
XFS used __nocast both for gfp_t and for flags used by XFS allocator.
The latter left with unsigned int __nocast; we might want to add a
different type for those but for now let's leave them alone. That,
BTW, is a case when __nocast use had been actively confusing - it had
been used in the same code for two different and similar types, with
no way to catch misuses. Switch of gfp_t to bitwise had caught that
immediately...
One tricky bit is left alone to be dealt with later - mapping->flags is
a mix of gfp_t and error indications. Left alone for now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size. Also use helper
functions to convert between human time units and jiffies rather than constant
HZ division to avoid rounding errors.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
attached patch should fix the following race:
Proc 1 Proc 2
__flush_batch()
ll_rw_block()
do_get_write_access()
lock_buffer
jh is only waiting for checkpoint
-> b_transaction == NULL ->
do nothing
unlock_buffer
test_set_buffer_locked()
test_clear_buffer_dirty()
__journal_file_buffer()
change the data
submit_bh()
and we have sent wrong data to disk... We now clean the dirty buffer flag
under buffer lock in all cases and hence we know that whenever a buffer is
starting to be journaled we either finish the pending write-out before
attaching a buffer to a transaction or we won't write the buffer until the
transaction is going to be committed.
The test in jbd_unexpected_dirty_buffer() is redundant - remove it.
Furthermore we have to clear the buffer dirty bit under the buffer lock to
prevent races with buffer write-out (and hence prevent returning a buffer with
IO happening).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We must be sure that the current data in buffer are sent to disk. Hence we
have to call ll_rw_block() with SWRITE.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix race between journal_commit_transaction() and other places as
journal_unmap_buffer() that are adding buffers to transaction's t_forget list.
We have to protect against such places by holding j_list_lock even when
traversing the t_forget list. The fact that other places can only add buffers
to the list makes the locking easier. OTOH the lock ranking complicates the
stuff...
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It seems that kjournald() may be missing a check of the JFS_UNMOUNT flag
before calling schedule(). This showed up in testing of OCFS2 recovery
where our recovery thread would hang in journal_kill_thread() called from
journal_destroy() because kjournald never got a chance to read the flag to
shut down before the schedule().
Zach pointed out the missing check which led me to hack up this trivial
patch. It's been tested many times now and I have yet to reproduce the
hang, which was happening very regularly before.
<mild rant>
I'm guessing that we could really use some wait_event() calls with helper
functions in, well, most of jbd these days which would make a ton of the
wait code there vastly cleaner.
</mild rant>
As for why this doesn't happen in ext3 (or OCFS2 during normal
mount/unmount of the local nodes journal), I think it may that the specific
timing of events in the ocfs2 recovery thread exposes a race there.
Because ocfs2_replay_journal() is only interested in playing back the
journal, initialization and shutdown happen very quicky with no other
metadata put into that specific journal.
Acked-by: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch contains the following cleanups:
- make needlessly global functions static
- journal.c: remove the unused global function __journal_internal_check
and move the check to journal_init
- remove the following write-only global variable:
- journal.c: current_journal
- remove the following unneeded EXPORT_SYMBOL:
- journal.c: journal_recover
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1. Establish a simple API for process freezing defined in linux/include/sched.h:
frozen(process) Check for frozen process
freezing(process) Check if a process is being frozen
freeze(process) Tell a process to freeze (go to refrigerator)
thaw_process(process) Restart process
frozen_process(process) Process is frozen now
2. Remove all references to PF_FREEZE and PF_FROZEN from all
kernel sources except sched.h
3. Fix numerous locations where try_to_freeze is manually done by a driver
4. Remove the argument that is no longer necessary from two function calls.
5. Some whitespace cleanup
6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
cleared before setting PF_FROZEN, recalc_sigpending does not check
PF_FROZEN).
This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!
Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a bug in list scanning that can cause us to skip the last buffer on the
checkpoint list (and hence fail to do any progress under some rather
unfavorable conditions).
The problem is we first do jh=next_jh and then test
} while (jh!=last_jh);
Hence we skip the last buffer on the list (if it was not the only buffer on
the list). As we already do jh=next_jh; in the beginning of the loop we
are safe to just remove the assignment in the end. It can happen that 'jh'
will be freed at the point we test jh != last_jh but that does not matter
as we never *dereference* the pointer.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix possible false assertion failure in log_do_checkpoint(). We might fail
to detect that we actually made a progress when cleaning up the checkpoint
lists if we don't retry after writing something to disk. The patch was
confirmed to fix observed assertion failures for several users.
When we flushed some buffers we need to retry scanning the list.
Otherwise we can fail to detect our progress.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes the lots-of-fsx-linux-instances-cause-a-slow-leak bug.
It's been there since 2.6.6, caused by:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.5/2.6.5-mm4/broken-out/jbd-move-locked-buffers.patch
That patch moves under-writeout ordered-data buffers onto a separate journal
list during commit. It took out the old code which was based on a single
list.
The old code (necessarily) had logic which would restart I/O against buffers
which had been redirtied while they were on the committing transaction's
t_sync_datalist list. The new code only writes buffers once, ignoring
redirtyings by a later transaction, which is good.
But over on the truncate side of things, in journal_unmap_buffer(), we're
treating buffers on the t_locked_list as inviolable things which belong to the
committing transaction, and we just leave them alone during concurrent
truncate-vs-commit.
The net effect is that when truncate tries to invalidate a page whose buffers
are on t_locked_list and have been redirtied, journal_unmap_buffer() just
leaves those buffers alone. truncate will remove the page from its mapping
and we end up with an anonymous clean page with dirty buffers, which is an
illegal state for a page. The JBD commit will not clean those buffers as they
are removed from t_locked_list. The VM (try_to_free_buffers) cannot reclaim
these pages.
The patch teaches journal_unmap_buffer() about buffers which are on the
committing transaction's t_locked_list. These buffers have been written and
I/O has completed. We can take them off the transaction and undirty them
within the context of journal_invalidatepage()->journal_unmap_buffer().
Acked-by: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
