This allows to build the fsl_ucc_hdlc driver as a module.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The QE_General4 workaround is only valid for the MPC832x and MPC836x
SoCs. The other SoCs that embed a QUICC engine are not affected by this
hardware bug and thus can use the computed divisors (this was
successfully tested on the T1040).
Similalry to what was done in commit 8ce795cb0c ("i2c: mpc: assign the
correct prescaler from SVR") in order to avoid changes in
the device tree nodes of the QE (with maybe a variant of the compatible
property), the PVR reg is read out to find out if the workaround must be
applied or not.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Because of integer computation rounding in u-boot (that sets the QE
brg-frequency DTS prop), the clk value is 99999999 Hz even though it is
100 MHz.
When setting brg clks that are exact divisors of 100 MHz, this small
differnce plays a role and can result in lower clks to be output (for
instance 20 MHz - divide by 5 - results in 16.666 MHz - divide by 6).
This patch fixes that by "forcing" the brg_clk to the nearest kHz when
the difference is below 2 integer rounding errors (i.e. 4).
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
immrbar_virt_to_phys() is not used anymore
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Li Yang <pku.leo@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use builtin_platform_driver() helper to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
of_mm_gpiochip_add_data() calls mm_gc->save_regs() before
setting the data. Therefore ->save_regs() cannot use
gpiochip_get_data()
An Oops is encountered without this fix.
fixes: 1e714e54b5 ("powerpc: qe_lib-gpio: use gpiochip data pointer")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: <stable@vger.kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Scott Wood <oss@buserror.net>
Commit 0e6e01ff69 ("CPM/QE: use genalloc to manage CPM/QE muram")
has changed the way muram is managed.
genalloc uses kmalloc(), hence requires the SLAB to be up and running.
On powerpc 8xx, cpm_reset() is called early during startup.
cpm_reset() then calls cpm_muram_init() before SLAB is available,
hence the following Oops.
cpm_reset() cannot be called during initcalls because the CPM is
needed for console.
This patch removes the call to cpm_muram_init() from cpm_reset().
cpm_muram_init() will be called from a new function called cpm_init()
which is declared as subsys_initcall, unless cpm_muram_alloc() is
called earlier for the serial console in which case cpm_muram_init()
will be called from there.
The reason for calling it from two places is that some drivers
(e.g. i2c-cpm) need some of the initialisations done by
cpm_muram_init() but don't call cpm_muram_alloc(). The console
driver calls cpm_muram_alloc() but some platforms might not use
the CPM serial ports for console.
[ 0.000000] Unable to handle kernel paging request for data at address 0x00000008
[ 0.000000] Faulting instruction address: 0xc01acce0
[ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1]
[ 0.000000] PREEMPT CMPC885
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5
[ 0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000
[ 0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000
[ 0.000000] REGS: c0537e50 TRAP: 0300 Not tainted (4.4.14-s3k-dev-g0886ed8-svn)
[ 0.000000] MSR: 00001032 <ME,IR,DR,RI> CR: 28044428 XER: 00000000
[ 0.000000] DAR: 00000008 DSISR: c0000000
GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff
GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8
GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000
GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001
[ 0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc
[ 0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c
[ 0.000000] Call Trace:
[ 0.000000] [c0537f00] [00000200] 0x200 (unreliable)
[ 0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c
[ 0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8
[ 0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30
[ 0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168
[ 0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380
[ 0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98
[ 0.000000] Instruction dump:
[ 0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6
[ 0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f
[ 0.000000] ---[ end trace dc8fa200cb88537f ]---
fixes: 0e6e01ff69 ("CPM/QE: use genalloc to manage CPM/QE muram")
Cc: stable@vger.linux.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: Removed some string changes unrelated to bugfix]
Signed-off-by: Scott Wood <oss@buserror.net>
Use of_property_read_bool to check for the existence of a property.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e1,e2;
statement S2,S1;
@@
- if (of_get_property(e1,e2,NULL))
+ if (of_property_read_bool(e1,e2))
S1 else S2
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
modify get_qe_base function with of_address_to_resource
instead of of_get_property and of_translate_address.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use the function resource_size instead of explicit computation.
Problem found using Coccinelle.
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Signed-off-by: Scott Wood <oss@buserror.net>
QE has module to support TDM, some other protocols
supported by QE are based on TDM.
add a qe-tdm lib, this lib provides functions to the protocols
using TDM to configurate QE-TDM.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tdm clock configuration in both qe clock system and ucc
fast controller.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rx_sync and tx_sync are used by QE-TDM mode,
add them to struct ucc_fast_info.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Highlights:
- Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras
- Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V
- Add POWER9 cputable entry from Michael Neuling
- FPU/Altivec/VSX save/restore optimisations from Cyril Bur
- Add support for new ftrace ABI on ppc64le from Torsten Duwe
Various cleanups & minor fixes from:
- Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril
Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey,
Sukadev Bhattiprolu, Suraj Jitindar Singh.
General:
- atomics: Allow architectures to define their own __atomic_op_* helpers from
Boqun Feng
- Implement atomic{, 64}_*_return_* variants and acquire/release/relaxed
variants for (cmp)xchg from Boqun Feng
- Add powernv_defconfig from Jeremy Kerr
- Fix BUG_ON() reporting in real mode from Balbir Singh
- Add xmon command to dump OPAL msglog from Andrew Donnellan
- Add xmon command to dump process/task similar to ps(1) from Douglas Miller
- Clean up memory hotplug failure paths from David Gibson
pci/eeh:
- Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei
Yang.
- EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
- PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
- PCI: Add pcibios_bus_add_device() weak function from Wei Yang
- MAINTAINERS: Update EEH details and maintainership from Russell Currey
cxl:
- Support added to the CXL driver for running on both bare-metal and
hypervisor systems, from Christophe Lombard and Frederic Barrat.
- Ignore probes for virtual afu pci devices from Vaibhav Jain
perf:
- Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu
- hv-24x7: Fix usage with chip events, display change in counter values,
display domain indices in sysfs, eliminate domain suffix in event names,
from Sukadev Bhattiprolu
Freescale:
- Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum
optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and
other dt bits, and minor fixes/cleanup."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qkAt
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"This was delayed a day or two by some build-breakage on old toolchains
which we've now fixed.
There's two PCI commits both acked by Bjorn.
There's one commit to mm/hugepage.c which is (co)authored by Kirill.
Highlights:
- Restructure Linux PTE on Book3S/64 to Radix format from Paul
Mackerras
- Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh
Kumar K.V
- Add POWER9 cputable entry from Michael Neuling
- FPU/Altivec/VSX save/restore optimisations from Cyril Bur
- Add support for new ftrace ABI on ppc64le from Torsten Duwe
Various cleanups & minor fixes from:
- Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy,
Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell
Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh.
General:
- atomics: Allow architectures to define their own __atomic_op_*
helpers from Boqun Feng
- Implement atomic{, 64}_*_return_* variants and acquire/release/
relaxed variants for (cmp)xchg from Boqun Feng
- Add powernv_defconfig from Jeremy Kerr
- Fix BUG_ON() reporting in real mode from Balbir Singh
- Add xmon command to dump OPAL msglog from Andrew Donnellan
- Add xmon command to dump process/task similar to ps(1) from Douglas
Miller
- Clean up memory hotplug failure paths from David Gibson
pci/eeh:
- Redesign SR-IOV on PowerNV to give absolute isolation between VFs
from Wei Yang.
- EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
- PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
- PCI: Add pcibios_bus_add_device() weak function from Wei Yang
- MAINTAINERS: Update EEH details and maintainership from Russell
Currey
cxl:
- Support added to the CXL driver for running on both bare-metal and
hypervisor systems, from Christophe Lombard and Frederic Barrat.
- Ignore probes for virtual afu pci devices from Vaibhav Jain
perf:
- Export Power8 generic and cache events to sysfs from Sukadev
Bhattiprolu
- hv-24x7: Fix usage with chip events, display change in counter
values, display domain indices in sysfs, eliminate domain suffix in
event names, from Sukadev Bhattiprolu
Freescale:
- Updates from Scott: "Highlights include 8xx optimizations, 32-bit
checksum optimizations, 86xx consolidation, e5500/e6500 cpu
hotplug, more fman and other dt bits, and minor fixes/cleanup"
* tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc: Fix unrecoverable SLB miss during restore_math()
powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers
powerpc/rcpm: Fix build break when SMP=n
powerpc/book3e-64: Use hardcoded mttmr opcode
powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible
powerpc/T104xRDB: add tdm riser card node to device tree
powerpc32: PAGE_EXEC required for inittext
powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree
powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)
powerpc/86xx: Introduce and use common dtsi
powerpc/86xx: Update device tree
powerpc/86xx: Move dts files to fsl directory
powerpc/86xx: Switch to kconfig fragments approach
powerpc/86xx: Update defconfigs
powerpc/86xx: Consolidate common platform code
powerpc32: Remove one insn in mulhdu
powerpc32: small optimisation in flush_icache_range()
powerpc: Simplify test in __dma_sync()
powerpc32: move xxxxx_dcache_range() functions inline
powerpc32: Remove clear_pages() and define clear_page() inline
...
cpm_muram_alloc_common is called twice and both the times
spin_lock_irqsave is held.
Using GFP_KERNEL can sleep in spin_lock_irqsave context and cause
deadlock
Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
as cpm_muram_alloc_common is used only in this file,
making it static
Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
127 is the theoretical up boundary of QEIC number,
in fact there only be 44 qe_ic_info now.
add check to overflow for qe_ic_info
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
ls1 has qe and ls1 has arm cpu.
move qe from arch/powerpc to drivers/soc/fsl
to adapt to powerpc and arm
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
