Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It would make sense to convert this to an allocating XArray and remove the
kfifo that is currently used to allocate the CQID, but that work is better
done by someone who has the hardware to test with.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a panic reported that on a system with x722 ethernet, when doing
the operations like:
# ip link add br0 type bridge
# ip link set eno1 master br0
# systemctl restart systemd-networkd
The system will panic "BUG: unable to handle kernel null pointer
dereference at 0000000000000034", with call chain:
i40iw_inetaddr_event
notifier_call_chain
blocking_notifier_call_chain
notifier_call_chain
__inet_del_ifa
inet_rtm_deladdr
rtnetlink_rcv_msg
netlink_rcv_skb
rtnetlink_rcv
netlink_unicast
netlink_sendmsg
sock_sendmsg
__sys_sendto
It is caused by "local_ipaddr = ntohl(in->ifa_list->ifa_address)", while
the in->ifa_list is NULL.
So add a check for the "in->ifa_list == NULL" case, and skip the ARP
operation accordingly.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add mapping of link mode: CAUI4 100Gbps CR4/KR4 with 4 lines and 25Gbps.
Fix mapping of link mode: GAUI2 50Gbps CR2/KR2 to be 2 lines with 25Gbps.
Fixes: 08e8676f16 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
To prevent a hardware memory leak when a DEVX DCT object is destroyed
without calling DRAIN DCT before, (e.g. under cleanup flow), need to
manage its creation and destruction via mlx5 core.
In that case the DRAIN DCT command will be called and only once that it
will be completed the DESTROY DCT command will be called. Otherwise, the
DESTROY DCT may fail and a hardware leak may occur.
As of that change the DRAIN DCT command should not be exposed any more
from DEVX, it's managed internally by the driver to work as expected by
the device specification.
Fixes: 7efce3691d ("IB/mlx5: Add obj create and destroy functionality")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Code review revealed a race condition which could allow the catas error
flow to interrupt the alias guid query post mechanism at random points.
Thiis is fixed by doing cancel_delayed_work_sync() instead of
cancel_delayed_work() during the alias guid mechanism destroy flow.
Fixes: a0c64a17ab ("mlx4: Add alias_guid mechanism")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This has been a slightly more active cycle than normal with ongoing core
changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5 On-Demand-Paging MR
feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and fixing
the various unregistration race conditions in rxe's unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
* Drivers should not assume umem SGLs are in PAGE_SIZE chunks
* ucontext is accessed via udata not other means
* Start to make the core code responsible for object memory
allocation
* Drivers should convert struct device to struct ib_device
via a helper
* Drivers have more tools to avoid use after unregister problems
-----BEGIN PGP SIGNATURE-----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=p12E
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a slightly more active cycle than normal with ongoing
core changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5
On-Demand-Paging MR feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and
fixing the various unregistration race conditions in rxe's
unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
- drivers should not assume umem SGLs are in PAGE_SIZE chunks
- ucontext is accessed via udata not other means
- start to make the core code responsible for object memory
allocation
- drivers should convert struct device to struct ib_device via a
helper
- drivers have more tools to avoid use after unregister problems"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
net/mlx5: ODP support for XRC transport is not enabled by default in FW
IB/hfi1: Close race condition on user context disable and close
RDMA/umem: Revert broken 'off by one' fix
RDMA/umem: minor bug fix in error handling path
RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
cxgb4: kfree mhp after the debug print
IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
IB/rdmavt: Fix loopback send with invalidate ordering
IB/iser: Fix dma_nents type definition
IB/mlx5: Set correct write permissions for implicit ODP MR
bnxt_re: Clean cq for kernel consumers only
RDMA/uverbs: Don't do double free of allocated PD
RDMA: Handle ucontext allocations by IB/core
RDMA/core: Fix a WARN() message
bnxt_re: fix the regression due to changes in alloc_pbl
IB/mlx4: Increase the timeout for CM cache
IB/core: Abort page fault handler silently during owning process exit
IB/mlx5: Validate correct PD before prefetch MR
IB/mlx5: Protect against prefetch of invalid MR
RDMA/uverbs: Store PR pointer before it is overwritten
...
When disabling and removing a receive context, it is possible for an
asynchronous event (i.e IRQ) to occur. Because of this, there is a race
between cleaning up the context, and the context being used by the
asynchronous event.
cpu 0 (context cleanup)
rc->ref_count-- (ref_count == 0)
hfi1_rcd_free()
cpu 1 (IRQ (with rcd index))
rcd_get_by_index()
lock
ref_count+++ <-- reference count race (WARNING)
return rcd
unlock
cpu 0
hfi1_free_ctxtdata() <-- incorrect free location
lock
remove rcd from array
unlock
free rcd
This race will cause the following WARNING trace:
WARNING: CPU: 0 PID: 175027 at include/linux/kref.h:52 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1]
CPU: 0 PID: 175027 Comm: IMB-MPI1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015
Call Trace:
dump_stack+0x19/0x1b
__warn+0xd8/0x100
warn_slowpath_null+0x1d/0x20
hfi1_rcd_get_by_index+0x84/0xa0 [hfi1]
is_rcv_urgent_int+0x24/0x90 [hfi1]
general_interrupt+0x1b6/0x210 [hfi1]
__handle_irq_event_percpu+0x44/0x1c0
handle_irq_event_percpu+0x32/0x80
handle_irq_event+0x3c/0x60
handle_edge_irq+0x7f/0x150
handle_irq+0xe4/0x1a0
do_IRQ+0x4d/0xf0
common_interrupt+0x162/0x162
The race can also lead to a use after free which could be similar to:
general protection fault: 0000 1 SMP
CPU: 71 PID: 177147 Comm: IMB-MPI1 Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015
task: ffff9962a8098000 ti: ffff99717a508000 task.ti: ffff99717a508000 __kmalloc+0x94/0x230
Call Trace:
? hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1]
hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1]
hfi1_aio_write+0xba/0x110 [hfi1]
do_sync_readv_writev+0x7b/0xd0
do_readv_writev+0xce/0x260
? handle_mm_fault+0x39d/0x9b0
? pick_next_task_fair+0x5f/0x1b0
? sched_clock_cpu+0x85/0xc0
? __schedule+0x13a/0x890
vfs_writev+0x35/0x60
SyS_writev+0x7f/0x110
system_call_fastpath+0x22/0x27
Use the appropriate kref API to verify access.
Reorder context cleanup to ensure context removal before cleanup occurs
correctly.
Cc: stable@vger.kernel.org # v4.14.0+
Fixes: f683c80ca6 ("IB/hfi1: Resolve kernel panics by reference counting receive contexts")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Patch series "Replace all open encodings for NUMA_NO_NODE", v3.
All these places for replacement were found by running the following
grep patterns on the entire kernel code. Please let me know if this
might have missed some instances. This might also have replaced some
false positives. I will appreciate suggestions, inputs and review.
1. git grep "nid == -1"
2. git grep "node == -1"
3. git grep "nid = -1"
4. git grep "node = -1"
This patch (of 2):
At present there are multiple places where invalid node number is
encoded as -1. Even though implicitly understood it is always better to
have macros in there. Replace these open encodings for an invalid node
number with the global macro NUMA_NO_NODE. This helps remove NUMA
related assumptions like 'invalid node' from various places redirecting
them to a common definition.
Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe]
Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx]
Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband]
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The the below commit, hns_roce_v2_modify_qp is called inside spinlock
while using GFP_KERNEL. Change it to GFP_ATOMIC.
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In function `c4iw_dealloc_mw`, variable mhp's value is printed after
freed, it is clearer to have the print before the kfree.
Otherwise racing threads could allocate another mhp with the same pointer
value and create confusing tracing.
Signed-off-by: Shaobo He <shaobo@cs.utah.edu>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The write access of an implicit MR is inherited to all of its children.
Therefore we must set the correct write access to the parent MR.
Pass full access_flags when creating umem to let it calculate write access
correctly.
Fixes: da6a496a34 ("IB/mlx5: Ranges in implicit ODP MR inherit its write access")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Kernel space provider driver should clean the CQs belonging to kernel
space consumers only. The current implementation is doing reverse of it.
Fixing the same by avoiding the call to __clean_cq on a kernel qp during
destroy.
Fixes: c50866e285 ("bnxt_re: fix the regression due to changes in alloc_pbl")
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Being able to build devlink as a module causes growing pains.
First all drivers had to add a meta dependency to make sure
they are not built in when devlink is built as a module. Now
we are struggling to invoke ethtool compat code reliably.
Make devlink code built-in, users can still not build it at
all but the dynamically loadable module option is removed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Three conflicts, one of which, for marvell10g.c is non-trivial and
requires some follow-up from Heiner or someone else.
The issue is that Heiner converted the marvell10g driver over to
use the generic c45 code as much as possible.
However, in 'net' a bug fix appeared which makes sure that a new
local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0
is cleared.
Signed-off-by: David S. Miller <davem@davemloft.net>
Following the PD conversion patch, do the same for ucontext allocations.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While adding the use of for_each_sg_dma_page iterator for Brodcom's rdma
driver, there was a regression added in the __alloc_pbl path. The change
left bnxt_re in DOA state in for-next branch.
Fixing the regression to avoid the host crash when a user space object is
created. Restricting the unconditional access to hwq.pg_arr when hwq is
initialized for user space objects.
Fixes: 161ebe2498 ("RDMA/bnxt_re: Use for_each_sg_dma_page iterator on umem SGL")
Reported-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.
Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.
Following the RDMA Connection Manager (CM) protocol, it is clear when
an entry has to evicted form the cache. But life is not perfect,
remote peers may die or be rebooted. Hence, it's a timeout to wipe out
a cache entry, when the PF driver assumes the remote peer has gone.
During workloads where a high number of QPs are destroyed concurrently,
excessive amount of CM DREQ retries has been observed
The problem can be demonstrated in a bare-metal environment, where two
nodes have instantiated 8 VFs each. This using dual ported HCAs, so we
have 16 vPorts per physical server.
64 processes are associated with each vPort and creates and destroys
one QP for each of the remote 64 processes. That is, 1024 QPs per
vPort, all in all 16K QPs. The QPs are created/destroyed using the
CM.
When tearing down these 16K QPs, excessive CM DREQ retries (and
duplicates) are observed. With some cat/paste/awk wizardry on the
infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the
nodes:
cm_rx_duplicates:
dreq 2102
cm_rx_msgs:
drep 1989
dreq 6195
rep 3968
req 4224
rtu 4224
cm_tx_msgs:
drep 4093
dreq 27568
rep 4224
req 3968
rtu 3968
cm_tx_retries:
dreq 23469
Note that the active/passive side is equally distributed between the
two nodes.
Enabling pr_debug in cm.c gives tons of:
[171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave:
1,sl_cm_id: 0xd393089f} is NULL!
By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the
tear-down phase of the application is reduced from approximately 90 to
50 seconds. Retries/duplicates are also significantly reduced:
cm_rx_duplicates:
dreq 2460
[]
cm_tx_retries:
dreq 3010
req 47
Increasing the timeout further didn't help, as these duplicates and
retries stems from a too short CMA timeout, which was 20 (~4 seconds)
on the systems. By increasing the CMA timeout to 22 (~17 seconds), the
numbers fell down to about 10 for both of them.
Adjustment of the CMA timeout is not part of this commit.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When prefetching odp mr it is required to verify that pd of the mr is
identical to the pd for which the advise_mr request arrived with.
This check was missing from synchronous flow and is added now.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When deferring a prefetch request we need to protect against MR or PD
being destroyed while the request is still enqueued.
The first step is to validate that PD owns the lkey that describes the MR
and that the MR that the lkey refers to is owned by that PD.
The second step is to dequeue all requests when MR is destroyed.
Since PD can't be destroyed while it owns MRs it is guaranteed that when a
worker wakes up the request it refers to is still valid.
Now, it is possible to refrain from taking a reference on the device since
it is assured to be present as pd.
While that, replace the dedicated ordered workqueue with the system
unbound workqueue to reuse an existing resource and improve
performance. This will also fix a bug of queueing to the wrong workqueue.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix the following warning by adding a missing break:
drivers/infiniband/hw/hfi1/tid_rdma.c: In function ‘hfi1_tid_rdma_wqe_interlock’:
drivers/infiniband/hw/hfi1/tid_rdma.c:3251:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
switch (prev->wr.opcode) {
^~~~~~
drivers/infiniband/hw/hfi1/tid_rdma.c:3259:2: note: here
case IB_WR_RDMA_READ:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: c6c231175c ("IB/hfi1: Add interlock between TID RDMA WRITE and other requests")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kaike Wan <Kaike.wan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
To resolve conflicts with net-next and pick up the first patch.
* branch 'mlx5-next':
net/mlx5: Factor out HCA capabilities functions
IB/mlx5: Add support for 50Gbps per lane link modes
net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register
net/mlx5: Add new fields to Port Type and Speed register
net/mlx5: Refactor queries to speed fields in Port Type and Speed register
net/mlx5: E-Switch, Avoid magic numbers when initializing offloads mode
net/mlx5: Relocate vport macros to the vport header file
net/mlx5: E-Switch, Normalize the name of uplink vport number
net/mlx5: Provide an alternative VF upper bound for ECPF
net/mlx5: Add host params change event
net/mlx5: Add query host params command
net/mlx5: Update enable HCA dependency
net/mlx5: Introduce Mellanox SmartNIC and modify page management logic
IB/mlx5: Use unified register/load function for uplink and VF vports
net/mlx5: Use consistent vport num argument type
net/mlx5: Use void pointer as the type in address_of macro
net/mlx5: Align ODP capability function with netdev coding style
mlx5: use RCU lock in mlx5_eq_cq_get()
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current check does not take into account the previous value of
pinned_vm; thus it is quite bogus as is. Fix this by checking the
new value after the (optimistic) atomic inc.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes the following sparse warning:
drivers/infiniband/hw/cxgb4/cm.c:658:6: warning:
symbol 'read_tcb' was not declared. Should it be static?
Fixes: 11a27e2121 ("iw_cxgb4: complete the cached SRQ buffers")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Accroding to hip08's limitation, qp&cq specification is 1M, mtpt
specification 1M in kernel space.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a dead lock in usnic ib_register and netdev_notify path.
usnic_ib_discover_pf()
| mutex_lock(&usnic_ib_ibdev_list_lock);
| usnic_ib_device_add();
| ib_register_device()
| usnic_ib_query_port()
| mutex_lock(&us_ibdev->usdev_lock);
| ib_get_eth_speed()
| rtnl_lock()
order of lock: &usnic_ib_ibdev_list_lock -> usdev_lock -> rtnl_lock
rtnl_lock()
| usnic_ib_netdevice_event()
| mutex_lock(&usnic_ib_ibdev_list_lock);
order of lock: rtnl_lock -> &usnic_ib_ibdev_list_lock
Solution is to use the core's lock-free ib_device_get_by_netdev() scheme
to lookup ib_dev while handling netdev & inet events.
Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com>
Reviewed-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Reviewed-by: Tanmay Inamdar <tinamdar@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ucontext allocation and release aren't async events and don't need kref
accounting. The common layer of RDMA subsystem ensures that dealloc
ucontext will be called after all other objects are released.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The internal design of RDMA/core ensures that there dealloc ucontext will
be called only if alloc_ucontext succeeded, hence there is no need to
manage internal variable to mark validity of ucontext.
As part of this change, remove redundant memeset too.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Eswitch has two users: IB and ETH. They both register repersentors
when mlx5 interface is added, and unregister the repersentors when
mlx5 interface is removed. Ideally, each driver should only deal with
the entities which are unique to itself. However, current IB and ETH
drivers have to perform the following eswitch operations:
1. When registering, specify how many vports to register. This number
is the same for both drivers which is the total available vport
numbers.
2. When unregistering, specify the number of registered vports to do
unregister. Also, unload the repersentors which are already loaded.
It's unnecessary for eswitch driver to hands out the control of above
operations to individual driver users, as they're not unique to each
driver. Instead, such operations should be centralized to eswitch
driver. This consolidates eswitch control flow, and simplified IB and
ETH driver.
This patch doesn't change any functionality.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Merge mlx5-next shared branched into net-next,
From Bodong Wang:
1) Introduction of ECPF (Embedded CPU Physical Function), and low level
bits for mlx5 SmartNic capabilities support.
2) Vport enumeration refactoring that affect mlx5_ib and mlx5_core
From Aya Levin,
3) Add support for 50Gbps per lane link modes in the Port Type and Speed
register (PTYS)
4) Refactor low level query functions for PTYS register
5) Add support for 50Gbps per lane link modes to mlx5_ib
Note: due to a change in API in mlx5/core and a later patch from net-next,
a fixup was squashed with this merge commit that replaces FDB_UPLINK_VPORT
with MLX5_VPORT_UPLINK which exists only in upstream net-next.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The following build warning was produced for the TID RDMA READ
patch ("IB/hfi1: Enable TID RDMA READ protocol"):
drivers/infiniband/hw/hfi1/qp.c: In function 'hfi1_setup_wqe':
drivers/infiniband/hw/hfi1/qp.c:328:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
hfi1_setup_tid_rdma_wqe(qp, wqe);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/hfi1/qp.c:329:2: note: here
case IB_QPT_UC:
^~~~
This patch will fix the issue by adding the "fall through" comment.
Fixes: f1ab4efa6d ("IB/hfi1: Enable TID RDMA READ protocol")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now when we have the udata passed to all the ib_xxx object creation APIs
and the additional macro 'rdma_udata_to_drv_context' to get the
ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally
start to remove the dependency of the drivers in the
ib_xxx->uobject->context.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adjust the cq/qp mask based on the number of bar2 pages in a host page.
For user-mode rdma, the granularity of the BAR2 memory mapped to a user
rdma process during queue allocation must be based on the host page
size. The lld attributes udb_density and ucq_density are used to figure
out how many sge contexts are in a bar2 page. So the rdev->qpmask and
rdev->cqmask in iw_cxgb4 need to now be adjusted based on how many sge
bar2 pages are in a host page.
Otherwise the device fails to work on non 4k page size systems.
Fixes: 2391b0030e ("cxgb4: Remove SGE_HOST_PAGE_SIZE dependency on page size")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds new device capability for IB_DEVICE_MEM_MGT_EXTENSIONS to
indicate device support for the following features:
1. Fast register memory region.
2. send with remote invalidate by frmr
3. local invalidate memory regsion
As well as adds the max depth of frmr page list len.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current all messages printed for aeq subtype event are wrong. Thus,
delete them and only the value of subtype event is printed.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The memory allocated for wrid should be initialized to zero.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The state of mr after reregister operation should be set to valid
state. Otherwise, it will keep the same as the state before reregistered.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch modifies the minimum CQ depth specification of hip08 and is
consistent with the processing of hip06.
Signed-off-by: chenglang <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Driver now supports new link modes: 50Gbps per lane support for
50G/100G/200G. This patch reads the correct field (legacy vs. extended)
based on a FW indication bit, and adds a translation function (link
modes to IB width and speed) to the new link modes.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This patch exposes new link modes (including 50Gbps per lane), and ext_*
fields which describes the new link modes in Port Type and Speed
register (PTYS).
Access functions, translation functions (speed <-> HW bits) and
link max speed function were modified.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This patch fascicles queries to speed related fields in Port Type and
Speed register (PTYS) into a single API. I addition, this patch
refactors functions which serves only Ethernet driver: remove the
protocol type as an input parameter, move code from 'core' directory
into 'en' directory and add 'eth' prefix to the function's name. The
patch also encapsulates functions that are not used outside the Ethernet
driver removes redundant include files.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Driver used to name uplink vport as FDB_UPLINK_VPORT, it's hard to
comply with the same naming convention along with the introduction of
other vports. Use MLX5_VPORT as the prefix for such vports and
relocate the uplink vport definition to public header file for the
benefits of both net and IB drivers.
This patch doesn't change any functionality.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
IB driver maintains different registration and load function calls
for uplink and VF vports. This is not necessary as they only differ
with each other on their profiles.
This patch doesn't change any functionality.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
