rx_data and rx_bytes present for tx_wait_done are optional parameters.
If not provided, function should not attempt to copy received data.
This change fixes memcpy NULL pointer dereference issue occurring when
optional rx_data is NULL while received message size is non-zero.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there are multiple IPCs being sent in a short span of time, there
is a possibility of more than one message being on the Rx list after
receiving response from firmware. In such cases, when the first
notification of interrupt from firmware is received, driver retrieves
the message from the Rx list but does not delete it from the list till
the next lock. In the meantime, when another interrupt is received from
the firmware, driver is reading the previous message again since the
previous message has not been removed from the list.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Host clears DONE bit to signal IPC target it has completed the
operation. Once this is done, IPC target i.e. DSP may proceed with the
next reply, filling registers with new portion of data.
Because of this, host should always read all registers prior to clearing
DONE and BUSY bits to ensure no desynchronization happens the time in
between clearing bits and reading message data (here, extension).
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are a few soc_tplg_dapm_widget_*_create functions with similar
content, but slightly different flow, unify their flow and make sure
that we go to error handler and free memory in case of failure.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Acked-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide helper functions and use them to free dtexts and dvalues in
topology. This is followup cleanup after related changes in this area as
suggested in:
https://mailman.alsa-project.org/pipermail/alsa-devel/2019-January/144761.html
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When we unload Skylake driver we may end up calling
hdac_component_master_unbind(), it uses acomp->audio_ops, which we set
in hdmi_codec_probe(), so we need to set it to NULL in hdmi_codec_remove(),
otherwise we will dereference no longer existing pointer.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When driver is probed, we iterate over NHLT and check if clk entries are
present. For each such entry we call register_skl_clk and keep the
result in data->clk[].
Currently data->clk is sparsely indexed using NHLT table iterator, while
when freeing we use number of registered entries. Let's just use
data->avail_clk_cnt as index, so it can be reset back in
unregister_src_clk.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When we remove component we need to reverse things which were done on
init, this consists of topology cleanup, lists cleanup and releasing
firmware.
Currently cleanup handlers are put in wrong places or otherwise missing.
So add proper component cleanup function and perform cleanups in it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently debugfs has no cleanup function. Add skl_debufs_exit function
so we can clean after ourselves properly.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When we unload and reload machine driver, we shouldn't return that we
failed to initialize. This allows to reload machine driver, without
having to unload whole stack.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change kzalloc to devm_kzalloc, so compr gets automatically freed when
it's no longer needed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently on each driver reload internal counter is being increased. It
causes failure to enumerate driver devices, as they have hardcoded:
.codec_name = "ehdaudio0D2",
As there is currently no devices with multiple hda codecs and there is
currently no established way to reliably differentiate, between them,
always assign bus->idx = 0;
This fixes a problem when we unload and reload machine driver idx gets
incremented, so .codec_name would've needed to be set to "ehdaudio1D2"
after first reload and so on.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If skl_probe_work() was not run driver ends up dereferencing NULL
pointer when operating on lists in skl_platform_unregister().
To fix this initialize lists in skl_create(). Also run
cancel_work_sync() before all cleanup functions, so we don't end up
unnecessarily running probe work.
Easily reproducible with:
while true; do modprobe snd_soc_skl; rmmod snd_soc_skl; done
(with the assumption that relevant drivers are added to blacklist on
system boot)
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For BXT platforms, the recommended sequence to program the SDxFMT is to
first couple the stream, write the format and decouple again.
For all other platforms said sequence remains unchanged.
To prevent code duplication, IS_BXT (and consequently IS_CFL) macro is
relocated to hda_codec.h file so it can be accessed by SKL driver.
Signed-off-by: Paweł Harłoziński <pawel.harlozinski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Upon enabling the ASRC DAC we need a delay to avoid popping the
speakers.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Cc: Ross Zwisler <zwisler@chromium.org>
Tested-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet the max98357a also supports 32, 44.1 and
88.2 kHz sample rate. This support was also introduced recently by
commit fdf34366d3 ("ASoC: max98357a: add missing supported rates").
Actually the machine driver validates the supported sample rates but
this is not really needed because the component driver can all apply
whatever constraints are needed and do their own validation. So, remove
the checks from the machine driver as are not needed at all. This way,
we also support 32, 44.1 and 88.2 kHz sample rates and we get rid of the
errors like the below.
rk3399-gru-sound sound: rockchip_sound_max98357a_hw_params() doesn't support this sample rate: 44100
rk3399-gru-sound sound: ASoC: machine hw_params failed: -22
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_find_dai() finds component first via specified
snd_soc_dai_link_component, and find DAI from it.
We already have soc_find_component() to find component,
but soc_find_dai() has original implementation to find component.
We shouldn't have duplicate implementation to do same things.
This patch uses soc_find_component() at soc_find_dai()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_find_component() is using "of_node" and "name" to finding component,
but we should use snd_soc_dai_link_component now, because it is created
to such purpose.
This patch uses snd_soc_dai_link_component for soc_find_component().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC already has snd_soc_is_matching_component() to confirming
matching component, but, soc_find_component() has original
implementation to confirm component.
We shouldn't have duplicate implementation to do same things.
This patch uses snd_soc_is_matching_component() at soc_find_component()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
move soc_find_component() next to snd_soc_is_matching_component().
This is prepare for soc_find_component() cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rt5514-spi can use dev_get_drvdata() to get its component
because it is using snd_soc_component_set_drvdata();
static int rt5514_spi_pcm_probe(...)
{
...
=> snd_soc_component_set_drvdata(component, ...);
...
}
We don't need to use snd_soc_lookup_component() for it.
This patch uses dev_get_drvdata() instead of snd_soc_lookup_component().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver was wired to be only usable in DIN1/DOUT1 mode, switching
between TDM and non TDM modes based on the number of channels.
While keeping this functionality for compatibility add support for using
all DIN1/2/3/4 and DOUT1/2/3 if it is needed by setting the TDM slots to
2.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If multiple serializers are connected in the system and the number of
channels will need to use more than one serializer the mask to enable the
serializers were left to 0 if tdm_mask is provided
Fixes: dd55ff8346 ("ASoC: davinci-mcasp: Add set_tdm_slots() support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Unused serializers needs to be configured as INACTIVE, otherwise they will
underflow/overflow when multiple serializers are connected, but some are
not needed for the given stream.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch the driver to use modern UUID API, i.e. guid_t type and
accompanying functions, such as guid_equal().
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds the codec driver for the CS47L90 SmartCodec. This is a
multi-functional codec based on the Cirrus Logic Madera platform.
Signed-off-by: Nikesh Oswal <nikesh@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds the codec driver for the CS47L85 SmartCodec. This is a
multi-functional codec based on the Cirrus Logic Madera platform.
Signed-off-by: Nariman Poushin <npoushin@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds the codec driver for the CS47L35 SmartCodec. This is a
multi-functional codec based on the Cirrus Logic Madera platform.
Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Cirrus Logic Madera codecs are a family of related codecs with
extensive digital and analogue I/O, digital mixing and routing,
signal processing and programmable DSPs. This patch adds common
support code shared by all Madera codecs.
This patch also adds the pdata to the parent mfd pdata struct.
Since there is a circular build dependency it's convenient to
patch them both atomically.
Signed-off-by: Nariman Poushin <nariman@opensource.cirrus.com>
Signed-off-by: Nikesh Oswal <Nikesh.Oswal@cirrus.com>
Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com>
Signed-off-by: Ajit Pandey <ajit.pandey@incubesol.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support of audio 16 bits format record to STM32
DFSDM driver.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC used 2 type of Platform if sound card doesn't need
Platform.
1) use Dummy Platform as Platform component
2) use CPU component as Platform component
Now, ALSA SoC allows "no Platform" settings, and it will behave
same as 2) case selection. And, all sound card which doesn't need
specific Platform are now not selecting Platform any more.
This means, no sound card is using dummy Platform on ALSA SoC any
more. This patch removes unused dummy Platform.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is now supporting "no Platform". Sound card doesn't need to
select "CPU component" as "Platform" anymore if it doesn't need
special Platform.
This patch removes such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
