Commit Graph

2020 Commits

Author SHA1 Message Date
Mark Brown
d1113af4e8 Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2015-04-12 19:48:30 +01:00
Mark Brown
1ddca24c53 Merge branch 'topic/dapm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-core 2015-04-10 16:09:21 +01:00
Mark Brown
5f97a4bd2c Merge branch 'topic/delay' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-core 2015-04-10 16:04:46 +01:00
Lars-Peter Clausen
2e55b90a5e ASoC: Make soc_dpcm_debugfs_add() non-fatal
Failing to register the debugfs entries is not fatal and will not affect
normal operation of the sound card. Don't abort the card registration if
soc_dpcm_debugfs_add() fails.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-09 11:32:29 +01:00
Takashi Iwai
664c715573 ALSA: hda - Work around races of power up/down with runtime PM
Currently, snd_hdac_power_up()/down() helpers checks whether the codec
is being in pm (suspend/resume), and skips the call of runtime get/put
during it.  This is needed as there are lots of power up/down
sequences called in the paths that are also used in the PM itself.  An
example is found in hda_codec.c::codec_exec_verb(), where this can
power up the codec while it may be called again in its power up
sequence, too.

The above works in most cases, but sometimes we really want to wait
for the real power up.  For example, the control element get/put may
want explicit power up so that the value change is assured to reach to
the hardware.   Using the current snd_hdac_power_up(), however,
results in a race, e.g. when it's called during the runtime suspend is
being performed.  In the worst case, as found in patch_ca0132.c, it
can even lead to the deadlock because the code assumes the power up
while it was skipped due to the check above.

For dealing with such cases, this patch makes snd_hdac_power_up() and
_down() to two variants: with and without in_pm flag check.  The
version with pm flag check is named as snd_hdac_power_up_pm() while
the version without pm flag check is still kept as
snd_hdac_power_up().  (Just because the usage of the former is fewer.)

Then finally, the patch replaces each call potentially done in PM with
the new _pm() variant.

In theory, we can implement a unified version -- if we can distinguish
the current context whether it's in the pm path.  But such an
implementation is cumbersome, so leave the code like this a bit messy
way for now...

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96271
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-08 13:50:42 +02:00
Joe Perches
eab0fbfa41 ALSA: Use const struct ac97_quirk
Use const to reduce data by ~3Kb.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-05 08:41:05 +02:00
Takashi Iwai
d545a57c5f ALSA: hda - Sync node attributes at resume from widget power saving
So far we assumed that the node attributes like amp values remain
during the power state transition of the node itself.  While this is
true for IDT/STAC codecs I've tested, but some other codecs don't seem
behaving in that way.

This patch implements a partial sync mechanism specific to the given
widget node.  Now we've merged the regmap support, and it can be
easily written with regcache_sync_region().

Tested-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-04 12:22:52 +02:00
Lars-Peter Clausen
7c0e3facf3 ASoC: dapm: Remove delayed_work from dapm context struct
The delayed_work field in the snd_soc_dapm_context struct is now unused and
can be removed. Removing it reduces the size of the snd_soc_dapm_context
struct by ~50% from 100 bytes to 48 bytes.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01 21:28:15 +01:00
Lars-Peter Clausen
37660b6daf ASoC: Remove suspend_bias_level from DAPM context struct
The only two users of the suspend_bias_level field were two rather old
drivers which weren't exactly doing things by the book. Those drivers have
been updated and field is now unused and can be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-01 21:28:04 +01:00
Lars-Peter Clausen
1efb53a220 ASoC: simple-card: Remove support for setting differing DAI formats
Having to set different formats on the CPU side and the CODEC side of a DAI
link is usually indication that something is terribly wrong and in most
cases is a result of a broken driver that implements a set_fmt() callback
which does not follow the specification. In the past this feature has been
used to work around broken drivers, rather than fixing them. We don't really
want to encourage this, so remove support for setting different formats on
both ends of the link.

Along the way switch to static DAI format setup by setting the the dai_fmt
field of the snd_soc_dai_link rather than calling snd_soc_dai_fmt().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-26 18:35:48 -07:00
Takashi Iwai
40ba66a702 ALSA: hda - Add cache support for COEF read/write
The 16bit COEF read/write is pretty standard for many codecs, and they
can be cached in most cases -- more importantly, they need to be
restored at resume.  For making this easier, add the cache support to
regmap.  If the codec driver wants to cache the COEF access, set
codec->cache_coef flag and issue AC_VERB_GET_PROC_COEF with the coef
index in LSB 8 bits.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:44 +01:00
Takashi Iwai
d313e0a88d ALSA: hda - Add a fake stereo amp register support
HD-audio spec is inconvenient regarding the handling of stereo volume
controls.  It can set and get only single channel at once (although
there is a special option to set the same value to both channels).
This patch provides a fake pseudo-register via the regmap access so
that the stereo channels can be read and written by a single call.
It'd be useful, for example, for implementing DAPM widgets.

A stereo amp pseudo register consists of the encoding like the normal
amp verbs but it has both SET_LEFT (bit 13) and SET_RIGHT (bit 12)
bits set.  The regmap reads and writes a 16bit value for this pseudo
register where the upper 8bit is for the right chanel and the lower
8bit for the left channel.

Note that the driver doesn't recognize conflicts when both stereo and
mono channel registers are mixed.  Mixing them would certainly confuse
the operation.  So, use carefully.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:42 +01:00
Takashi Iwai
5e56bcea50 ALSA: hda - Allow driver to add vendor-specific verbs for regmap
Codecs may have own vendor-specific verbs, and we need to allow each
driver to give such verbs for cached accesses.  Here a verb can be put
into a single array and looked through it at readable and writeable
callbacks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:41 +01:00
Takashi Iwai
faa75f8a2e ALSA: hda - Use regmap for parameter caches, too
The amp hash table was used for recording the cached reads of some
capability values like pin caps or amp caps.  Now all these are moved
to regmap as well.

One addition to the regmap helper is codec->caps_overwriting flag.
This is set in snd_hdac_override_parm(), and the regmap helper accepts
any register while this flag is set, so that it can overwrite even the
read-only verb like AC_VERB_PARAMETERS.  The flag is cleared
immediately in snd_hdac_override_parm(), as it's a once-off flag.

Along with these changes, the no longer needed amp hash and relevant
fields are removed from hda_codec struct now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:40 +01:00
Takashi Iwai
9ba17b4d13 ALSA: hda - Implement uncached version of parameter reads
Sometimes we need the uncached reads, e.g. for refreshing the tree.
This patch provides the helper function for that and uses it for
refreshing widgets, reading subtrees and the whole proc reads.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:38 +01:00
Takashi Iwai
01ed3c06c6 ALSA: hda - Use regmap for codec parameter reads
Let's start converting the access functions to regmap.
The first one is the simplest, just converting the codec parameter
read helper function snd_hda_param_read().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:37 +01:00
Takashi Iwai
4d75faa044 ALSA: hda - Add regmap support
This patch adds an infrastructure to support regmap-based verb
accesses.  Because o the asymmetric nature of HD-audio verbs,
especially the amp verbs, we need to translate the verbs as a sort of
pseudo registers to be mapped uniquely in regmap.

In this patch, a pseudo register is built from the NID, the
AC_VERB_GET_* and 8bit parameters, i.e. almost in the form to be sent
to HD-audio bus but without codec address field.  OTOH, for writing,
the same pseudo register is translated to AC_VERB_SET_* automatically.
The AC_VERB_SET_AMP_* verb is re-encoded from the corresponding
AC_VERB_GET_AMP_* verb and parameter at writing.

Some verbs has a single command for read but multiple for writes.  A
write for such a verb is split automatically to multiple verbs.

The patch provides also a few handy helper functions.  They are
designed to be accessible even without regmap.  When no regmap is set
up (e.g. before the codec device instantiation), the direct hardware
access is used.  Also, it tries to avoid the unnecessary power-up.
The power up/down sequence is performed only on demand.

The codec driver needs to call snd_hdac_regmap_exit() and
snd_hdac_regmap_exit() at probe and remove if it wants the regmap
access.

There is one flag added to hdac_device.  When the flag lazy_cache is
set, regmap helper ignores a write for a suspended device and returns
as if it was actually written.  It reduces the hardware access pretty
much, e.g. when adjusting the mixer volume while in idle.  This
assumes that the driver will sync the cache later at resume properly,
so use it carefully.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:36 +01:00
Takashi Iwai
71fc4c7ef5 ALSA: hda - Move generic array helpers to core lib
This will be used by the regmap support.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:19:35 +01:00
Takashi Iwai
0585244869 ALSA: hda - Support indirect execution of verbs
Add an overriding exec_verb op to struct hdac_device so that the call
via snd_hdac_exec_verb() can switch to a different route depending on
the setup.  The codec driver sets this field so that it can handle the
errors or applying quirks appropriately.  Furthermore, this mechanism
will be used for smooth transition for the regmap support in later
patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:17:37 +01:00
Takashi Iwai
3256be6537 ALSA: hda - Add widget sysfs tree
This patch changes the sysfs files assigned to the codec device on the
bus which were formerly identical with hwdep sysfs files.  Now it
shows only a few core parameter, vendor_id, subsystem_id, revision_id,
afg, mfg, vendor_name and chip_name.

In addition, now a widget tree is added to the bus device sysfs
directory for showing the widget topology and attributes.  It's just a
flat tree consisting of subdirectories named as the widget NID
including various attributes like widget capability bits.  The AFG
(usually NID 0x01) is always found there, and it contains always
amp_in_caps, amp_out_caps and power_caps files.  Each of these
attributes show a single value.  The rest are the widget nodes
belonging to that AFG.  Note that the child node might not start from
0x02 but from another value like 0x0a.

Each child node may contain caps, pin_caps, amp_in_caps, amp_out_caps,
power_caps and connections files.  The caps (representing the widget
capability bits) always contain a value.  The rest may contain
value(s) if the attribute exists on the node.  Only connections file
show multiple values while other attributes have zero or one single
value.

An example of ls -R output is like below:
% ls -R /sys/bus/hdaudio/devices/hdaudioC0D0/
/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/:
01/  04/  07/  0a/  0d/  10/  13/  16/  19/  1c/  1f/  22/
02/  05/  08/  0b/  0e/  11/  14/  17/  1a/  1d/  20/  23/
03/  06/  09/  0c/  0f/  12/  15/  18/  1b/  1e/  21/

/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/01:
amp_in_caps  amp_out_caps  power_caps

/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/02:
amp_in_caps  amp_out_caps  caps  connections  pin_caps  pin_cfg
power_caps

/sys/bus/hdaudio/devices/hdaudioC0D0/widgets/03:
.....

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:17:27 +01:00
Takashi Iwai
7639a06c23 ALSA: hda - Move a part of hda_codec stuff into hdac_device
Now some codes and functionalities of hda_codec struct are moved to
hdac_device struct.  A few basic attributes like the codec address,
vendor ID number, FG numbers, etc are moved to hdac_device, and they
are accessed like codec->core.addr.  The basic verb exec functions are
moved, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:17:17 +01:00
Takashi Iwai
d068ebc25e ALSA: hda - Move some codes up to hdac_bus struct
A few basic codes for communicating over HD-audio bus are moved to
struct hdac_bus now.  It has only command and get_response ops in
addition to the unsolicited event handling.

Note that the codec-side tracing support is disabled temporarily
during this transition due to the code shuffling.  It will be
re-enabled later once when all pieces are settled down.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:17:02 +01:00
Takashi Iwai
e3d280fc6d ALSA: hda - Make snd_hda_bus_type public
Define the common hd-audio driver and device types to bind over
snd_hda_bus_type publicly.  This allows to implement other type of
device and driver code over hd-audio bus.

Now both struct hda_codec and struct hda_codec_driver inherit these
new struct hdac_device and struct hdac_driver, respectively.

The bus registration is done in subsys_initcall() to assure it
before any other driver registrations.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 13:15:51 +01:00
Nikesh Oswal
c66150824b ASoC: dapm: add code to configure dai link parameters
dai-link params for codec-codec links were fixed. The fixed
link between codec and another chip which may be another codec,
baseband, bluetooth codec etc may require run time configuaration
changes. This change provides an optional alsa control to select
one of the params from a list of params.

Signed-off-by: Nikesh Oswal <nikesh@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-17 22:54:54 +00:00
Mark Brown
3ee5990d08 Merge branch 'topic/jack' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel 2015-03-17 12:16:27 +00:00
Mark Brown
275ed3a195 Merge branch 'topic/rt5670' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel 2015-03-17 12:16:16 +00:00
Takashi Iwai
2a557a861a Merge branch 'topic/hda-unbind' into for-next 2015-03-16 14:48:20 +01:00
Lars-Peter Clausen
6b5b042d4c ASoC: Make snd_soc_dapm_kcontrol_codec() inline
snd_soc_dapm_kcontrol_codec() is a extremely simple function and inlining it
typically results in less code than necessary for calling the non-inlined
version of the function.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-16 11:40:24 +00:00
Bard Liao
d3ef705434 ASoC: rt5670: Add IRQ function
This patch adds the IRQ function support of rt5670. We use a flag
named dev_gpio in platform data to inform codec driver if the IRQ
function is used or not. Also, we export rt5670_set_jack_detect
for machine driver to pass the jack point.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11 12:08:20 +00:00
Takashi Iwai
a52afea68f ASoC: Changes for v4.1
A selection of changes for v4.1 so far.  The main things are:
 
  - Move of jack registration to the card where it belongs.
  - Support for DAPM routes specified by both the machine driver and DT.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU960DAAoJECTWi3JdVIfQkKIH/RDvxRn8dvKOPF5U9Uix3chH
 JWKkzqfsMP0EpmQTzCQPp0ShAyYcWSbYsopicynPxUem5vS4Z8+UmOgEEgkj59pK
 USbF6v1jCQXA6BcbKyUcRRBD9FtRkfVDc7mYbRs2CcwQz2CGCgee41cvPM+2BT+z
 QdNC9UJARSweGvE1IUJSfpfYOly+BJ2s0/28RaQ0PGt+I0auoYx7IMFgMSDjv2p6
 PY0kyQiwm3Kyj2uNXPZ5gEuPxlw/t8n4fbQNrBYAvxzN+EF5NrGdKE3N7MI1xRV/
 EkFhzy+uM3X9c37tb2lT2fgPFlBc9rgPuLPSyoQ6nxa5ghCqAlgRhzpxRem8hhU=
 =VlCw
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Changes for v4.1

A selection of changes for v4.1 so far.  The main things are:

 - Move of jack registration to the card where it belongs.
 - Support for DAPM routes specified by both the machine driver and DT.
2015-03-06 14:25:27 +01:00
Mark Brown
256fca9247 Merge remote-tracking branches 'asoc/topic/jack', 'asoc/topic/max98357a', 'asoc/topic/omap' and 'asoc/topic/rt286' into asoc-next 2015-03-05 01:07:23 +00:00
Mark Brown
4a7e041570 Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/davinci', 'asoc/topic/gpiod' and 'asoc/topic/intel' into asoc-next 2015-03-05 01:07:21 +00:00
Lars-Peter Clausen
77c71765ef ASoC: Remove snd_soc_jack_new()
There are no users of snd_soc_jack_new() left and new users should use
snd_soc_card_jack_new() instead. So remove the function.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04 17:10:48 +00:00
Lars-Peter Clausen
970939964c ASoC: Allow to register jacks at the card level
Jacks are typically card level elements, but are currently registered with a
CODEC. When it was originally introduced snd_soc_jack_new() took a
snd_soc_card as its parameter, but at that time DAPM was only implemented at
the CODEC level and there was only one CODEC per card. This made it clear
which CODEC to use for the jack DAPM operations. But the multi-component
patchset added support for having multiple CODECs per card and with it the
API was updated to register jacks with a specific CODEC instance instead.
Subsequently DAPM support at the card level has been introduced, but the
snd_soc_jack_new() API has so remained unchanged.

This leaves us with the issue that the DAPM pins that are managed by the
jack detection logic usually are part of the card DAPM context but are
accessed through a CODEC DAPM context. Currently this works fine, but might
break in the future if we take a more hierarchical approach to DAPM
contexts.

Furthermore with componentization progressing systems that do not register
a snd_soc_codec might appear, while these system may still want to able to
register a jack.

This patch addresses these issues by adding a new function called
snd_soc_card_jack_new() that can be used to register jacks with the card
rather than a CODEC.

This new function is mostly identical to snd_soc_jack_new() except that it
additionally allows to directly specify the DAPM pins associated with the
jack. This was done since most users of snd_soc_jack_new() typically call
snd_soc_jack_add_pins() right after it, which is not necessary with the new
API and allows to reduce the amount of boiler plate code.

The old snd_soc_jack_new() is re-implemented as a wrapper around
snd_soc_card_jack_new().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04 17:09:51 +00:00
Masanari Iida
1a6ab46fa9 ALSA: Fix spelling typo in Documentation/DocBook/alsa-driver-api.xml
This patch fix spelling typo found in alsa-driver-api.xml.
It is because this file is generated from comments in source files,
I have to fix source files.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-04 12:12:59 +01:00
Takashi Iwai
e086e3035e ALSA: core: Re-add snd_device_disconnect()
Revive snd_device_disconnect() again so that it can be called from the
individual driver.  This time, HD-audio will need it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-03 11:26:28 +01:00
Nicolin Chen
f23e860edb ASoC: core: Add extra dapm properties for Device Tree
The current helper functions, snd_soc_of_parse_audio_simple_widgets()
and snd_soc_of_parse_audio_routing(), set dapm_widgets and dapm_routes
without caring if they are already set by using build-in widgets and
routes in the card driver. So there could be one of them, build-in one
or Device Tree one, overrided by the other depending on which one was
assigned later.

This patch adds an extra pair of dapm_widgets and dapm_routes for DT
use only so as to prevent unexpected overriding.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-24 23:46:13 +09:00
Vinod Koul
48c7699fb2 ASoC: core: allow pcms to be registered as nonatomic
ALSA core with commit 257f8cce5d - "ALSA: pcm: Allow nonatomic trigger
operations" allows trigger ops to implemented as nonatomic. For ASoC, we can
specify this in dailinks and is updated while snd_pcm is created

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-24 00:43:59 +09:00
Fang, Yang A
052a9f6982 ALSA: Add params_set_format helper
Add a helper to set pcm format directly from params

Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-24 00:43:18 +09:00
Takashi Iwai
72f770c6ac Merge branch 'topic/timestamp' into for-next 2015-02-23 09:15:02 +01:00
Pierre-Louis Bossart
2d52a5abd5 ALSA: core: remove .wall_clock
can be removed without breaking git-bisect now

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-20 17:30:07 +01:00
Pierre-Louis Bossart
3179f62001 ALSA: core: add .get_time_info
Introduce more generic .get_time_info to retrieve
system timestamp and audio timestamp in single routine.
Backwards compatibility is preserved with same functionality
as with .wall_clock method (to be removed in following commits
to avoid breaking git bisect)

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-20 17:30:05 +01:00
Pierre-Louis Bossart
229d043096 ALSA: core: selection of audio_tstamp type and accuracy reports
Audio timestamps can be extracted from sample counters, wall clocks,
PHC clocks (Ethernet AVB), on-demand synchronized snapshots. This
patch provides the ability to report timestamping capabilities, select
timestamp types and retrieve timestamp accuracy, if supported.
Details can be found in Documentations/sound/alsa/timestamping.txt

This functionality is introduced by reclaiming the reserved_aligned
field introduced by commit9c7066aef4a5eb8e4063de28f06c508bf6f2963a
in snd_pcm_status to provide userspace with selection/query capabilities.
Additional driver_tstamp and audio_tstamp_accuracy fields are also added.

snd_pcm_mmap_status remains a read-only structure with only
the audio timestamp value accessible from user space. The selection
of audio timestamp type is done through snd_pcm_status only

This commit does not impact ABI and does not impact the default
behavior. By default audio timestamp is aligned with hw_pointer and
reports the DMA position. Backwards compatibility is handled by using
the HDAudio wall clock for playback and the hw_ptr for all other
cases.

For timestamp selection a new STATUS_EXT ioctl is introduced with
read/write parameters. Alsa-lib will be modified to make use of
STATUS_EXT.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-20 17:30:03 +01:00
Takashi Iwai
54a721abd7 ALSA: seq: Drop snd_seq_autoload_lock() and _unlock()
The autoload lock became already superfluous due to the recent rework
of autoload code.  Let's drop them now.  This allows us to simplify a
few codes nicely.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12 14:42:31 +01:00
Takashi Iwai
056622053b ALSA: seq: Define driver object in each driver
This patch moves the driver object initialization and allocation to
each driver's module init/exit code like other normal drivers.  The
snd_seq_driver struct is now published in seq_device.h, and each
driver is responsible to define it with proper driver attributes
(name, probe and remove) with snd_seq_driver specific attributes as id
and argsize fields.  The helper functions snd_seq_driver_register(),
snd_seq_driver_unregister() and module_snd_seq_driver() are used for
simplifying codes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12 14:15:54 +01:00
Takashi Iwai
af03c243a1 ALSA: seq: Clean up device and driver structs
Use const string pointer instead of copying the id string to each
object.  Also drop the status and list fields of snd_seq_device struct
that are no longer used.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12 14:13:47 +01:00
Takashi Iwai
7c37ae5c62 ALSA: seq: Rewrite sequencer device binding with standard bus
We've used the old house-made code for binding the sequencer device
and driver.  This can be far better implemented with the standard
bus nowadays.

This patch refactors the whole sequencer binding code with the bus
/sys/bus/snd_seq.  The devices appear as id-card-device on this bus
and are bound with the drivers corresponding to the given id like the
former implementation.  The module autoload is also kept like before.

There is no change in API functions by this patch, and almost all
transitions are kept inside seq_device.c.  The proc file output will
change slightly but kept compatible as much as possible.

Further integration works will follow in later patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12 11:35:11 +01:00
Takashi Iwai
72496edcf8 ALSA: seq: Don't compile snd_seq_device_load_drivers() for built-in
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12 11:35:11 +01:00
Pierre-Louis Bossart
2b79d7a6bf ALSA: pcm: allow for trigger_tstamp snapshot in .trigger
Don't use generic snapshot of trigger_tstamp if low-level driver or
hardware can get a more precise value for better audio/system time
synchronization.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-09 16:01:53 +01:00
Mark Brown
1bf9f29a05 Merge remote-tracking branches 'asoc/topic/simple', 'asoc/topic/sta32x', 'asoc/topic/tdm-slot', 'asoc/topic/tegra' and 'asoc/topic/tlv320aic3x' into asoc-next 2015-02-09 15:10:29 +08:00
Mark Brown
af70797105 Merge remote-tracking branches 'asoc/topic/pxa', 'asoc/topic/rcar' and 'asoc/topic/rt286' into asoc-next 2015-02-09 15:10:24 +08:00
Mark Brown
3f1cf65757 Merge remote-tracking branches 'asoc/topic/cs42l73', 'asoc/topic/dai' and 'asoc/topic/davinci' into asoc-next 2015-02-09 15:10:14 +08:00
Mark Brown
e1e62305af Merge remote-tracking branch 'asoc/topic/w-codec' into asoc-next 2015-02-09 15:10:03 +08:00
Mark Brown
1030047492 Merge remote-tracking branch 'asoc/topic/pcm512x' into asoc-next 2015-02-09 15:10:02 +08:00
Mark Brown
afcfe4359e Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2015-02-09 15:10:00 +08:00
Mark Brown
0cee4db21e Merge remote-tracking branches 'asoc/fix/ac97', 'asoc/fix/atmel', 'asoc/fix/intel', 'asoc/fix/rt286', 'asoc/fix/rt5640', 'asoc/fix/samsung', 'asoc/fix/sgtl5000', 'asoc/fix/sta32x', 'asoc/fix/tlv320aic3x' and 'asoc/fix/wm8731' into asoc-linus 2015-02-09 15:09:49 +08:00
Mark Brown
b34510b70d ASoC: Updates for v3.20
Nothing too exciting here yet, a small optimization for DAPM from
 Lars-Peter and a few small bits and pieces for drivers but nothing
 that really stands out.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUoX40AAoJECTWi3JdVIfQCHkH/20AXx65DLEvKjtKJTbhE25j
 XSmN3ZtXuEdzg70rG1E2YZsZofxRWShX7HHyCwmepWfe30o+V4UCR+4HyHIWVLF6
 O3TpupfcQ9ACP+/jQQxxySnTld6LJqW7rNXpxTVGeaba82uDtKIVgv/gHoUtEBDi
 NfG0RoVcfpb0k52LWzijIDx4YxVCuIkPHLFqBP63S92XNgw7bc8zjMl65ayY43M+
 obfD0ISIdEudmkyqNrQzuNtxl14wsYjzQ5VYqltW5kLaEQVtmD8Zp1bOVI3m0xhX
 KY8zQnUUwA4+Cxs8aAm/NvczAZ/GyEQSIjTdUQZDXm0k6H81eya108SfxGvaMYI=
 =DSaV
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.19-rc2' into asoc-linus

ASoC: Updates for v3.20

Nothing too exciting here yet, a small optimization for DAPM from
Lars-Peter and a few small bits and pieces for drivers but nothing
that really stands out.

# gpg: Signature made Tue 30 Dec 2014 00:15:48 HKT using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: key AF88CD16: no public key for trusted key - skipped
# gpg: key AF88CD16 marked as ultimately trusted
# gpg: key 5621E907: no public key for trusted key - skipped
# gpg: key 5621E907 marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
2015-02-09 15:09:48 +08:00
Takashi Iwai
6bbc7fed84 ALSA: Add a helper to add a new attribute group to card
For assigning sysfs entries for a card device from the driver,
introduce a new helper function, snd_card_add_dev_attr().  In this
way, we can avoid the possible race between the device registration
and the sysfs addition / removal.

The driver can pass a new attribute group to add freely.  This has to
be called before snd_card_register().

Currently, up to two extra groups can be added.  More than that, it'll
return an error.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-06 09:56:33 +01:00
Takashi Iwai
a3ae255e37 ASoC: Updates for v3.20
More updates for v3.20:
 
  - Lots of refactoring from Lars-Peter Clausen, moving drivers to more
    data driven initialization and rationalizing a lot of DAPM usage.
  - Much improved handling of CDCLK clocks on Samsung I2S controllers.
  - Lots of driver specific cleanups and feature improvements.
  - CODEC support for TI PCM514x and TLV320AIC3104 devices.
  - Board support for Tegra systems with Realtek RT5677.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU0ok8AAoJECTWi3JdVIfQ3ccH/2zb+b477H4GNhUw5AEzdHtC
 L7CI+5Q9VOGJQmZTjayRdUcPUHx4sTpYdQVTI56Q6CJk0OFljKNJcRrbzPqNgJ46
 yOrMTIpNvzFEv46f7rX2uKfvAFOVRAA2f+gl34AMLXqxL5aydbZZBtoe2jP9lL8z
 fIZ/s7qXHn3xnvxqNwOz3pnu6wFDrxbG34lXZaTaFQOueZ3fsthWLsz0xtO6a7aI
 J9tA+wejd9qf+D3i6svsi+MhB6OehYMh9Fbm+ODj6NMWZGCIA3SJ/PD+gbCg318+
 Xo0FNOyiw0fSAeBcHrEcfoaWBJrswxXjXaNbrIXc1/0gTj8AOJHCRus3w0OQU+Q=
 =Yw2l
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.20

More updates for v3.20:

 - Lots of refactoring from Lars-Peter Clausen, moving drivers to more
   data driven initialization and rationalizing a lot of DAPM usage.
 - Much improved handling of CDCLK clocks on Samsung I2S controllers.
 - Lots of driver specific cleanups and feature improvements.
 - CODEC support for TI PCM514x and TLV320AIC3104 devices.
 - Board support for Tegra systems with Realtek RT5677.

Conflicts:
	sound/soc/intel/sst-mfld-platform-pcm.c
2015-02-05 07:08:35 +01:00
Mark Brown
cb6bfd3de4 Merge remote-tracking branches 'asoc/topic/rx51', 'asoc/topic/samsung', 'asoc/topic/sh', 'asoc/topic/simple' and 'asoc/topic/sta32x' into asoc-next 2015-02-04 20:57:18 +00:00
Mark Brown
d84dbf3351 Merge remote-tracking branches 'asoc/topic/omap', 'asoc/topic/pxa' and 'asoc/topic/rcar' into asoc-next 2015-02-04 20:57:16 +00:00
Mark Brown
6d5c729dab Merge remote-tracking branches 'asoc/topic/cs42l73', 'asoc/topic/dai' and 'asoc/topic/davinci' into asoc-next 2015-02-04 20:57:10 +00:00
Mark Brown
7a869e108e Merge remote-tracking branch 'asoc/topic/w-codec' into asoc-next 2015-02-04 20:57:06 +00:00
Mark Brown
7d590e4623 Merge remote-tracking branch 'asoc/topic/pcm512x' into asoc-next 2015-02-04 20:57:06 +00:00
Mark Brown
b47f8a5dfb Merge remote-tracking branch 'asoc/topic/dapm' into asoc-next 2015-02-04 20:57:04 +00:00
Mark Brown
d01aa9b704 Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2015-02-04 20:57:04 +00:00
Mark Brown
de784bed8f Merge remote-tracking branches 'asoc/fix/ac97', 'asoc/fix/atmel', 'asoc/fix/intel', 'asoc/fix/rt286', 'asoc/fix/rt5640', 'asoc/fix/sgtl5000', 'asoc/fix/sta32x', 'asoc/fix/tlv320aic3x' and 'asoc/fix/wm8731' into asoc-linus 2015-02-04 20:56:58 +00:00
Takashi Iwai
3fe9cf390f Merge branch 'topic/snd-device' into for-next 2015-02-03 17:57:16 +01:00
Takashi Iwai
d29697dc3b ASoC: Add sysfs entries via static attribute groups
Instead of calling device_create_file() manually, assign the static
attribute group entries at the device registration.  This simplifies
the error handling and avoids the possible races.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-02 20:02:42 +00:00
Takashi Iwai
830953c072 ALSA: Drop snd_get_device() helper
Since the device is no longer hidden but embedded into each component,
we no longer need snd_get_device().  Let's drop it and relevant codes.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02 17:01:38 +01:00
Takashi Iwai
40a4b26385 ALSA: Simplify snd_device_register() variants
Now that all callers have been replaced with
snd_device_register_for_dev(), let's drop the obsolete device
registration code and concentrate only on the code handling struct
device directly.  That said,

- remove the old snd_device_register(),
- rename snd_device_register_for_dev() with snd_device_register(),
- drop superfluous arguments from snd_device_register(),
- change snd_unregister_device() to pass the device pointer directly

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02 17:01:26 +01:00
Takashi Iwai
04c5d5a430 ALSA: compress: Embed struct device
Like previous patches, this one embeds the struct device into struct
snd_compr.  As the dev field wasn't used beforehand, it's reused as
the new device struct.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02 14:42:45 +01:00
Takashi Iwai
aee5012fbb ALSA: rawmidi: Embed struct device
Like previous patches, this changes the device management for rawmidi,
embedding the struct device into struct snd_rawmidi.  The required
change is more or less same as hwdep device.

The currently unused dev field is reused as the new embedded struct
field now.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02 14:42:43 +01:00
Takashi Iwai
ef46c7af93 ALSA: pcm: Embed struct device
Like previous patches, at this time we embed the struct device into
PCM object.  However, this needs a bit more caution: struct snd_pcm
doesn't own one device but two, for both playback and capture!  Thus
not struct snd_pcm but struct snd_pcm_str object contains the device.

Along with this change, pcm->dev field is dropped for avoiding
confusion.  It was meant to point to a non-standard parent.  But,
since now we can touch each struct device directly, we can manipulate
the parent field easily there, too.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02 14:42:42 +01:00
Takashi Iwai
7b46160000 ALSA: hwdep: Embed struct device
Like the previous patch, this one embeds the device object into hwdep
object.  For a proper object lifecycle, it's freed in the release
callback.

This also allows us to create sysfs entries via passing to the groups
field of the device without explicit function calls.  Since each
driver can see the device and touch its groups field directly, we
don't need to delegate in hwdep core any longer.  So, remove the
groups field from snd_hwdep, and let the user (in this case only
hda_hwdep.c) modify the device groups.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02 14:42:42 +01:00
Takashi Iwai
0fcd9f4b3c ALSA: control: Embed struct device
This patch embeds a struct device for the control device into the card
object and avoid the device creation at registration time.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02 14:42:41 +01:00
Takashi Iwai
4b440be667 ALSA: Add a helper to initialize device
Introduce a new helper function snd_device_initialize() to initialize
the device object for sound devices.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02 14:42:33 +01:00
Takashi Iwai
23c18d4bfd ALSA: control: Provide a helper to look for the preferred subdevice
Instead of open-coding the search over the control file loop, provide
a helper function for the preferred subdevice assigned to the current
process.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02 14:21:21 +01:00
Takashi Iwai
92b7952da8 ALSA: Allow to pass the device object to snd_register_device*()
This is a preliminary patch for the further work on embedding struct
device into each sound device instance.  It changes
snd_register_device*() helpers to receive the device object directly
for skipping creating a device there.

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-02 14:21:07 +01:00
Takashi Iwai
d832f3dcb6 Merge branch 'topic/ak411x-fix' into for-next 2015-01-28 22:32:10 +01:00
Takashi Iwai
1781e78c63 ALSA: ak411x: Fix race of reinit() calls
Protect the call with a mutex, as this may be called in parallel
(either from the PCM rate change and the clock change).

Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 22:30:18 +01:00
Takashi Iwai
1293617cdd ALSA: ak411x: Add PM helper functions
Define snd_ak4114_suspend() and snd_ak4114_resume() functions to
handle PM properly, stopping and restarting the work at PM.
Currently only ice1712/juli.c deals with the PM and ak4114, so fix the
calls there appropriately.

The same PM functions are defined in ak4113.c, too, although they
aren't currently called yet (ice1712/quartet.c may be enhanced to
support PM later).

Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 22:30:12 +01:00
Takashi Iwai
4161b4505f ALSA: ak411x: Fix stall in work callback
When ak4114 work calls its callback and the callback invokes
ak4114_reinit(), it stalls due to flush_delayed_work().  For avoiding
this, control the reentrance by introducing a refcount.  Also
flush_delayed_work() is replaced with cancel_delayed_work_sync().

The exactly same bug is present in ak4113.c and fixed as well.

Reported-by: Pavel Hofman <pavel.hofman@ivitera.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 22:29:20 +01:00
Peter Rosin
f66f898e95 ALSA: pcm: Add snd_interval_ranges() and snd_pcm_hw_constraint_ranges()
Add helper functions to allow drivers to specify several disjoint
ranges for a variable. In particular, there is a codec (PCM512x) that
has a hole in its supported range of rates, due to PLL and divider
restrictions.

This is like snd_pcm_hw_constraint_list(), but for ranges instead of
points.

Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:27:15 +00:00
Takashi Iwai
6cbbfe1c8d ALSA: Include linux/io.h instead of asm/io.h
Nowadays it's recommended.  Replace all in a shot.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 16:49:33 +01:00
Thomas Niederprüm
f04b1e760a ASoC: sta32x: add device tree binding.
make the sta32x driver usable with device tree configs.  Code is heavily based
on the sta350 driver.

Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:13:25 +00:00
Lars-Peter Clausen
47e039413c ASoC: Add support for allocating AC'97 device before registering it
In some cases it is necessary to before additional operations after the
device has been initialized and before the device is registered. This can
for example be resetting the device.

This patch introduces a new function snd_soc_alloc_ac97_codec() which is
similar to snd_soc_new_ac97_codec() except that it does not register the
device. Any users of snd_soc_alloc_ac97_codec() are responsible for calling
device_add() manually.

Fixes: 6794f709b7 ("ASoC: ac97: Drop delayed device registration")
Reported-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-01-26 19:14:20 +00:00
Clemens Ladisch
1001fb810b ALSA: seq: increase the maximum number of queues
Queues are used both for scheduling playback events and for assigning
timestamps to recorded events, so it is easy to need quite a lot of
them, especially on a multi-user system.  Additionally, the actual
queue objects are allocated dynamically, so it does not really make
sense to have a low limit.  Increase it to something still sane.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26 13:57:29 +01:00
Clemens Ladisch
a55bdf1ec5 ALSA: seq: remove unused callback_all field
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26 13:56:58 +01:00
Clemens Ladisch
1f2fb11025 ALSA: seq: remove unused symbols
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26 13:54:55 +01:00
Lars-Peter Clausen
96da4e5b2e ASoC: Remove codec field from snd_soc_dapm_widget
There are no more users of this field left so it can finally be removed.
New users should use snd_soc_dapm_to_codec(w->dapm);

The reason why it is removed is because it doesn't fit to well anymore in
the componentized ASoC hierarchy, where DAPM works on the snd_soc_component
level. And the alternative of snd_soc_dapm_to_codec(w->dapm) typically
generates the same amount of code, so there is really no reason to keep it.

For automatic conversion the following coccinelle semantic patch can be used:
// <smpl>
@@
struct snd_soc_dapm_widget *w;
@@
-w->codec
+snd_soc_dapm_to_codec(w->dapm)
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:57:34 +00:00
Jyri Sarha
f9911803e8 ASoC: simple-card: Enable and disable DAI clocks as needed
Call clk_prepare_enable() and clk_disable_unprepare() for cpu dai
clock and codec dai clock in dai statup and shutdown callbacks. This
to make sure the related clock are enabled when the audio device is
used.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-15 11:45:52 +00:00
Qais Yousef
7b617289b6 ALSA: compress_driver.h: include sound/core.h explicitly
Fixes the following compilation error:

   include/sound/compress_driver.h: In function ‘snd_compr_drain_notify’:
   include/sound/compress_driver.h:177:2: error: implicit declaration of function ‘snd_BUG_ON’ [-Werror=implicit-function-declaration]
     if (snd_BUG_ON(!stream))

snd_BUG_ON() is defined in sound/core.h but the file is not included explicitly,
so include it.

Signed-off-by: Qais Yousef <qais.yousef@imgtec.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-13 16:50:31 +01:00
Kuninori Morimoto
cfcefe0126 ASoC: rsnd: add recovery support for under/over flow error on SRC
L/R channel will be switched if under/over flow error happen on
Renesas R-Car sound device by the HW bugs. Then, HW restart is required
for salvage. This patch add salvage support for SRC.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-12 12:59:32 +00:00
Oder Chiou
277880a356 ASoC: rt5677: Add the MICBIAS VDD setting in the platform data
The patch adds the MICBIAS VDD setting in the platform data. It can be set to
1V8 or 3V3 in the MICBIAS VDD.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-08 18:36:02 +00:00
Lars-Peter Clausen
ce64c8b9cf ASoC: Add helper function for changing the DAI link format
For some setups it is necessary to change the DAI link format at runtime.
This patch factors out the code that does the initial static DAI link format
configuration into a separate helper function which can be used board
drivers as well.

This allows board drivers that have to change the DAI link format at runtime
to reuse it instead of having to manually change the format on all DAIs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07 18:01:57 +00:00
Lars-Peter Clausen
adc2ae0bb6 ALSA: pcm: Remove unused functions declaration
Remove function declarations for functions that don't have a matching
implementation.

For snd_pcm_build_linear_format the implementation was removed in
64d27f96cb ("[ALSA] Support 3-bytes 24bit format in PCM OSS
emulation"). All the others never had one (as far as git history goes).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-03 20:59:57 +01:00
Lars-Peter Clausen
bb814c396a ALSA: emu10k1: Remove always NULL parameters
The various PCM and hwdep allocation functions in this driver take a pointer
to a pointer of a PCM/hwdep where if this parameter is provided the newly
allocated object is stored. All callers pass NULL though, so remove the
parameter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-02 16:32:45 +01:00
Lars-Peter Clausen
fa60c06569 ALSA: wss: Remove (almost) always NULL parameters
Most callers of snd_wss_pcm(), snd_wss_timer() and snd_cs4236_pcm() pass
NULL as the last parameter, some callers pass a pointer but never use it
after the function has been called and only a few callers pass a pointer and
actually use it. The later is only the case for snd_wss_pcm() for
snd_cs4236_pcm() and it is possible to get the same PCM object by accessing
the pcm field of the snd_wss struct that was passed as the first parameter.

This function removes the last parameters from the functions mentioned above
and updates the callers which used it to use chip->pcm instead. This allows
us to slightly simplify the functions since they don't have to check and set
the last parameter anymore which makes the code slightly shorter and
cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-02 16:30:08 +01:00
Lars-Peter Clausen
92533f1888 ASoC: sb16: Simplify snd_sb16dsp_pcm()
All callers of snd_sb16dsp_pcm() always pass the pcm field of the first
parameter as the last parameter. Simplify the function by moving this inside
the function itself. This makes the code a bit shorter and cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-02 16:28:35 +01:00
Lars-Peter Clausen
8c77629996 ALSA: sb8: Remove always NULL parameters
snd_sb8dsp_pcm() and snd_sb8dsp_midi() take a pointer to a pointer of a
PCM/MIDI where if this parameter is provided the newly allocated object is
stored. All callers pass NULL though, so remove the parameter. This makes
the code a bit cleaner and shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-02 16:28:21 +01:00
Lars-Peter Clausen
db5abb3c49 ALSA: gus: Remove always NULL parameters
snd_gf1_pcm_new() and snd_gf1_rawmidi_new() take a pointer to a pointer of a
PCM/MIDI where if this parameter is provided the newly allocated object is
stored. All callers pass NULL though, so remove the parameter. This makes
the code a bit cleaner and shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-02 16:27:42 +01:00
Lars-Peter Clausen
4b8ab88518 ALSA: es1688: Remove almost always NULL parameter
snd_es1688_pcm() takes a pointer to a pointer of a PCM where if this
parameter is provided the newly allocated PCM is stored. This PCM is also
available from the pcm field of the snd_es1688 struct that got passed to the
same function. This patch updates all callers which passed a pointer to use
that field instead and then removes the parameter from the function. This
makes the code a bit shorter and cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-02 16:27:03 +01:00
Lars-Peter Clausen
7f60541883 ALSA: ad1816a: Remove always NULL parameters
snd_ad1816a_pcm() and snd_ad1816a_timer() take a pointer to a pointer of a
PCM/timer where if this parameter is provided the newly allocated object is
stored. All callers pass NULL though, so remove the parameter. This makes
the code a bit cleaner and shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-02 16:26:20 +01:00
Libin Yang
48d882978e ALSA: pcm: add SNDRV_PCM_TRIGGER_DRAIN trigger
Add SNDRV_PCM_TRIGGER_DRAIN trigger for pcm drain.

Some audio devices require notification of drain events
in order to properly drain and shutdown an audio stream.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-31 17:10:08 +01:00
Takashi Iwai
240491e143 Merge branch 'topic/pcm-params' into for-next 2014-12-30 16:42:07 +01:00
Lars-Peter Clausen
757b037650 ALSA: pcm: Replace custom ld2 function with __fls
__fls has the same semantics as ld2, so there is no need to re-implement it.
Furthermore a lot of architectures have custom implementations of __fls that
are able to use special hardware instructions to compute the result. This
makes the code slightly shorter and faster.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30 16:41:56 +01:00
Lars-Peter Clausen
599ee3291a ALSA: pcm: Use __ffs() instead of ffs() in snd_mask_min()
The difference between __ffs and ffs is that ffs will return a one based
index whereas __ffs will return a zero based index. Furthermore ffs will
check if the passed value is zero and return zero in that case, whereas
__ffs behavior is undefined if the passed parameter is 0.

Since we already check if the mask is 0 before calling ffs and also subtract
1 from the result __ffs is the better choice.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30 16:41:55 +01:00
Lars-Peter Clausen
cd9978f1d3 ALSA: pcm: Simplify params_period_bytes()
The hw_params struct has a parameter that contains the period size in bytes.
This can be used instead of deriving the value from other parameters. This
is similar to e.g. params_buffer_bytes()

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30 16:41:55 +01:00
Lars-Peter Clausen
89827ca9dd ALSA: pcm: Add kernel doc for params_*() functions
Add kernel doc for the remaining undocumented params_*() functions.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30 16:41:54 +01:00
Lars-Peter Clausen
744c2ad2f9 ALSA: pcm: Convert params_* mask helpers to static inline functions
Use static inline functions instead of macros for the remaining params_*()
helpers that have not been converted yet. This is slightly cleaner and
offers better type safety.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30 16:41:54 +01:00
Lars-Peter Clausen
b3a8c862cd ALSA: pcm: Remove unused SNDRV_PCM_IOCTL1_{FALSE,TRUE} defines
Both SNDRV_PCM_IOCTL1_FALSE and SNDRV_PCM_IOCTL1_TRUE are unused and have in
fact never been used (at least as far as the git history goes).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30 16:41:54 +01:00
Lars-Peter Clausen
26c0d8a415 ALSA: pcm_params: Remove unused add/sub functions
Those two functions are not used anywhere and also their name is a bit to
generic to be in a global header, so remove them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30 16:41:54 +01:00
Lars-Peter Clausen
62f64a880a ALSA: pcm: Fix kerneldoc for params_*() functions
Fix a copy and paste error in the kernel doc description for the params_*()
functions.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-30 16:41:11 +01:00
Lars-Peter Clausen
86d7500326 ASoC: dapm: Simplify fully route card handling
For legacy reasons the ASoC framework assumes that a CODEC INPUT or OUTPUT
widget that is not explicitly connected to a external source or sink is
potentially connected to a source or a sink and hence the framework treats
the widget itself as source (for INPUT) or sink (for OUTPUT). For this
reason a INPUT or OUTPUT widget that is really not connected needs to be
explicitly marked as so.

Setting the card's fully_routed flag will cause the ASoC core, once that all
widgets and routes have been registered, to go through the list of all
widgets and mark all INPUT and OUTPUT that are not externally connected as
non-connected. This essentially negates the default behaviour of treating
INPUT or OUTPUT widgets without external routes as sources or sinks.

This patch takes a different approach while getting the same result. Instead
of first marking INPUT and OUTPUT widgets as sinks/sources and then later
marking them as non-connected, just never mark them as a sink or a source if
the fully_routed flag is set on a card.

This requires a lot less code and also results in a slightly faster card
initialization since there is no need to iterate over all widgets and check
whether the INPUT and OUTPUT widgets are connected or not.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22 12:44:59 +00:00
Linus Torvalds
bae41e45b7 sound updates for 3.19-rc1
This became a fairly large pull request.  In addition to the usual
 driver updates / fixes, there have been a high amount of cleanups in
 ASoC area, as well as control API helpers and kernel documentations
 fixes touching through the whole tree.
 
 In the driver side, the biggest changes are the support for new Intel
 SoC found on new x86 machines, and the updates of FireWire dice and
 oxfw drivers.
 
 Some remarkable items are below:
 
 * ALSA core
  - PCM mmap code cleanup, removal of arch-dependent codes
  - PCM xrun injection support
  - PCM hwptr tracepoint support
  - Refactoring of snd_pcm_action(), simplification of PCM locking
  - Robustified sequecner auto-load functionality
  - New control API helpers and lots of cleanups along with them
  - Lots of kerneldoc fixes and cleanups
 
 * USB-audio
  - The mixer resume code was largely rewritten, and the devices with
    quirks are resumed properly.
  - New hardware support: Focusrite Scarlett, Digidesign Mbox1,
    Denon/Marantz DACs, Zoom R16/24
 
 * FireWire
  - DICE driver updates with better duplex and sync support, including
    MIDI support
  - New OXFW driver for Oxford Semiconductor FW970/971 chipset,
    including the previous LaCie Speakers device.  Fullduplex and MIDI
    support included as well as DICE driver.
 
 * HD-audio
  - Refactoring the driver-caps quirk handling in snd-hda-intel
  - More consistent control names representing the topology better
  - Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic
    fix, ASUS Z99He laptop EAPD
 
 * ASoC
  - Conversion of AC'97 drivers to use regmap, bringing us closer to
    the removal of the ASoC level I/O code
  - Clean up a lot of old drivers that were open coding things that
    have subsequently been implemented in the core
  - Some DAPM performance improvements
  - Removal of the now seldom used CODEC mutex
  - Lots of updates for the newer Intel SoC support, including support
    for the DSP and some Cherrytrail and Braswell machine drivers
  - Support for Samsung boards using rt5631 as the CODEC
  - Removal of the obsolete AFEB9260 machine driver
  - Driver support for the TI TS3A227E headset driver used in some
    Chrombeooks
 
 * Others
  - ASIHPI driver update and cleanups
  - Lots of dev_*() printk conversions
  - Lots of trivial cleanups for the codes spotted by Coccinelle
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUiYaqAAoJEGwxgFQ9KSmkeo0P/2aDx2w8iVi8n7Og/7VBubkm
 VZkk08IOpP3h1ojyQRsBQPI0H5AquqQTZN1TJUDcy+6PD9vckYYcag9JWhA+0RBr
 I+BfTMLB3E4umIkzOjxeoyOzheL7GoZ+eZYEm8DkAhaue+cFhjNJz+S6g8ENkxJ9
 lSjErXQxyiowc39I0v1WBZcuq6glX1psEsVup9U8m7KhNx6lexj28A2MkqicW4hs
 DZE6pYrk57W7y3+/NWxaBiglrItvScBAPpPqoyDm9zuDNTmAtGjf1uMRmRyHe30Z
 iunHXki8Fc2yBBapmfYrcLC2jyIyZykcxniF8Hd4nXUvddisFUEFFhNmB6v392d0
 4/NXSqTnsq48vm0Ezjia2LySWKZZVQtam8t9262BKHcosKYObxirekD6vijSoWO8
 ZWoXa+U1oWSFEoOAFDsu6GFqFHFRi5VhqBgIaPEIxrT2MQGHL3KU1bp8CJi/5CTU
 pNh0wC9SMtnSJJXBIP/nYH81WQxaik3c4eiHFPN4+0McBZQiIaIqMG6x+iiVNvPB
 MNLLVAzk0QiWeCmSo8OBdjOV0/T+pfQ7lrTCn2B1jdJi1CkAO8m2SwQrG4PpRx8k
 lUTBd4zTx5DYR+yPF69OyoCQg0XKjW9g62Qo5rmxrQreiidROZOBS1bljWzIPeft
 otupLmK5kz67n3eB2eto
 =sB6v
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This became a fairly large pull request.  In addition to the usual
  driver updates / fixes, there have been a high amount of cleanups in
  ASoC area, as well as control API helpers and kernel documentations
  fixes touching through the whole tree.

  In the driver side, the biggest changes are the support for new Intel
  SoC found on new x86 machines, and the updates of FireWire dice and
  oxfw drivers.

  Some remarkable items are below:

  ALSA core:
   - PCM mmap code cleanup, removal of arch-dependent codes
   - PCM xrun injection support
   - PCM hwptr tracepoint support
   - Refactoring of snd_pcm_action(), simplification of PCM locking
   - Robustified sequecner auto-load functionality
   - New control API helpers and lots of cleanups along with them
   - Lots of kerneldoc fixes and cleanups

  USB-audio:
   - The mixer resume code was largely rewritten, and the devices with
     quirks are resumed properly.
   - New hardware support: Focusrite Scarlett, Digidesign Mbox1,
     Denon/Marantz DACs, Zoom R16/24

  FireWire:
   - DICE driver updates with better duplex and sync support, including
     MIDI support
   - New OXFW driver for Oxford Semiconductor FW970/971 chipset,
     including the previous LaCie Speakers device.  Fullduplex and MIDI
     support included as well as DICE driver.

  HD-audio:
   - Refactoring the driver-caps quirk handling in snd-hda-intel
   - More consistent control names representing the topology better
   - Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic
     fix, ASUS Z99He laptop EAPD

  ASoC:
   - Conversion of AC'97 drivers to use regmap, bringing us closer to
     the removal of the ASoC level I/O code
   - Clean up a lot of old drivers that were open coding things that
     have subsequently been implemented in the core
   - Some DAPM performance improvements
   - Removal of the now seldom used CODEC mutex
   - Lots of updates for the newer Intel SoC support, including support
     for the DSP and some Cherrytrail and Braswell machine drivers
   - Support for Samsung boards using rt5631 as the CODEC
   - Removal of the obsolete AFEB9260 machine driver
   - Driver support for the TI TS3A227E headset driver used in some
     Chrombeooks

  Others:
   - ASIHPI driver update and cleanups
   - Lots of dev_*() printk conversions
   - Lots of trivial cleanups for the codes spotted by Coccinelle"

* tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
  ALSA: pcxhr: NULL dereference on probe failure
  ALSA: lola: NULL dereference on probe failure
  ALSA: hda - Add "eapd" model string for AD1986A codec
  ALSA: hda - Add EAPD fixup for ASUS Z99He laptop
  ALSA: oxfw: Add hwdep interface
  ALSA: oxfw: Add support for capture/playback MIDI messages
  ALSA: oxfw: add support for capturing PCM samples
  ALSA: oxfw: Add support AMDTP in-stream
  ALSA: oxfw: Add support for Behringer/Mackie devices
  ALSA: oxfw: Change the way to start stream
  ALSA: oxfw: Add proc interface for debugging purpose
  ALSA: oxfw: Change the way to make PCM rules/constraints
  ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation
  ALSA: oxfw: Change the way to name card
  ALSA: dice: Add support for MIDI capture/playback
  ALSA: dice: Add support for capturing PCM samples
  ALSA: dice: Support for non SYT-Match sampling clock source mode
  ALSA: dice: Add support for duplex streams with synchronization
  ALSA: dice: Change the way to start stream
  ALSA: jack: Add dummy snd_jack_set_key() definition
  ...
2014-12-11 13:20:50 -08:00
Linus Torvalds
413fd0e3fb fbdev changes for 3.19
* support for mx6sl and mx6sx
 * OMAP HDMI audio rewrite to make it finally work
 * OMAP video PLL work to prepare for new DRA7xx SoCs
 * simplefb DT related improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUiZ3aAAoJEPo9qoy8lh71I4gP/0P0H7DtqwSRGWVDenVYC4o1
 IoRJgRBSu16gg9h1yEbluGIB0S/F+0vvgJLv83fXPIFYCApjeIyola60wzTxsCQO
 5+DY8IbioAiYCAC4brPbE17PQZhkqomVZy7Eo/WW8Bp7NRwhIVGgstjfKIKarRmR
 l7Zu7ciRt7A1677P8Te09w3hzWfvRNOCYi/lbSbHHeItpAfOqBQLI6WYh0WYFgbW
 oOqplfJKQDW67mj+DmnR8ep+CwN6/+AvmialkwiPKKBjE578zmTJuRXr/ZZMgqmY
 WiqC3O3yoTaDn9ReUw1CBmeYbWfhjdDotydTc0eUD+Z3cGIKlBh3coprpOEILuuU
 FCsbBWQGP2FtYPfvl0R80+VHLRhDxFXV0hcxocyvNzK78AfKrTKBMYTdPh/i+0M/
 +pA70thjlKpqZgBK6ukyMnB6KxiB9tOFdFx7PRXby4VgRGHqeYNRlvYPcYOPsgb2
 xRMIxCWhJHqZzNlv+bC6R4T8UTOIT4HoWthF0yN7SYrVujX0+1ky8Zz37jcTFnnS
 aNQ8MQL+6Uy1pa0v2c4oGH0qNVCWpsAXMtFBB1VkNzQg1vyuJHd3lgWYND33+3Uo
 C08lqzC3FZeA70g5iOhoP5IaW1JdQOe4EfDPU+ZjBQFB0Mgy025Z9dsAUcb08/2C
 s/ZXcRvzXMzpBSflsUzf
 =VAZB
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:
 - support for mx6sl and mx6sx
 - OMAP HDMI audio rewrite to make it finally work
 - OMAP video PLL work to prepare for new DRA7xx SoCs
 - simplefb DT related improvements

* tag 'fbdev-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (81 commits)
  video: uvesafb: Deletion of an unnecessary check before the function call "platform_device_put"
  video: fbdev-VIA: Deletion of an unnecessary check before the function call "framebuffer_release"
  video: fbdev-MMP: Deletion of an unnecessary check before the function call "mmp_unregister_path"
  video: mx3fb: Deletion of an unnecessary check before the function call "backlight_device_unregister"
  video: fbdev-OMAP2: Deletion of unnecessary checks before the function call "i2c_put_adapter"
  video: fbdev-SIS: Deletion of unnecessary checks before the function call "pci_dev_put"
  video: smscufx: Deletion of unnecessary checks before the function call "vfree"
  video: udlfb: Deletion of unnecessary checks before the function call "vfree"
  video: uvesafb: Deletion of an unnecessary check before the function call "uvesafb_free"
  video: fbdev-LCDC: Deletion of an unnecessary check before the function call "vfree"
  video: fbdev: arkfb: suppress build warning
  video: fbdev: s3fb: suppress build warning
  video: fbdev: vt8623fb: suppress build warning
  OMAPDSS: hdmi5: Fix bit field for IEC958_AES2_CON_SOURCE
  OMAPDSS: hdmi: Remove __exit qualifier from hdmi_uninit_output()
  OMAPDSS: hdmi5: Change hdmi_wp idlemode to to no_idle for audio playback
  OMAPDSS: Remove all references to obsolete HDMI audio callbacks
  ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  OMAPDSS: hdmi5: Register ASoC platform device for omap hdmi audio
  OMAPDSS: hdmi5: Remove callbacks for the old ASoC DAI driver
  ...
2014-12-11 12:46:32 -08:00
Takashi Iwai
bf35df66f1 ALSA: jack: Add dummy snd_jack_set_key() definition
For fixing a build error with CONFIG_SND_JACK=n
  sound/soc/codecs/ts3a227e.c:223:2: error: implicit declaration of function ‘snd_jack_set_key’ [-Werror=implicit-function-declaration]

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-08 15:44:47 +01:00
Takashi Iwai
e5edba464c ASoC: Updates for v3.19
Lots and lots of changes this time around, the usual set of driver
 updates and a huge bulk of cleanups from Lars-Peter.  Probably the most
 interesting thing for most users is the Intel driver updates which will
 (with some more machine integration work) enable support for newer x86
 laptops.
 
  - Conversion of AC'97 drivers to use regmap, bringing us closer to the
    removal of the ASoC level I/O code.
  - Clean up a lot of old drivers that were open coding things that have
    subsequently been implemented in the core.
  - Some DAPM performance improvements.
  - Removal of the now seldom used CODEC mutex.
  - Lots of updates for the newer Intel SoC support, including support
    for the DSP and some Cherrytrail and Braswell machine drivers.
  - Support for Samsung boards using rt5631 as the CODEC.
  - Removal of the obsolete AFEB9260 machine driver.
  - Driver support for the TI TS3A227E headset driver used in some
    Chrombeooks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUhajpAAoJECTWi3JdVIfQcOsH/00TMeXlkIjnYe+AC9VjEMYN
 IAYaXs1UcAfxB4CpS9ik4sb4LQnnxl9aqy5clUZOLHvDAgHmi6L1E8CteJUGFXZ6
 /jjpu9/mI975asgyiNP44QDLSNDjzXX6Z1eeXRGvyKMNZkpg4FLfVq9a6ONtf1dw
 N3Hl3LG+wvPhAdR/OSKg9eDVnV1iY7mWOWr/9/1q8UhYRpCTL8x70ytBz6tfeU2r
 4fQmFma+qefYXvyuqzuiwzSHJKt+46Z35EyNlkCBpVJVErZL2TGOv4H04PjZhg6+
 4CR+YGJMSURRhgMCvUCAh4j6a4c+oSXU/LEl9wMcjWMfa3UtZWKojqlK8lYMeoE=
 =Pv8r
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.19

Lots and lots of changes this time around, the usual set of driver
updates and a huge bulk of cleanups from Lars-Peter.  Probably the most
interesting thing for most users is the Intel driver updates which will
(with some more machine integration work) enable support for newer x86
laptops.

 - Conversion of AC'97 drivers to use regmap, bringing us closer to the
   removal of the ASoC level I/O code.
 - Clean up a lot of old drivers that were open coding things that have
   subsequently been implemented in the core.
 - Some DAPM performance improvements.
 - Removal of the now seldom used CODEC mutex.
 - Lots of updates for the newer Intel SoC support, including support
   for the DSP and some Cherrytrail and Braswell machine drivers.
 - Support for Samsung boards using rt5631 as the CODEC.
 - Removal of the obsolete AFEB9260 machine driver.
 - Driver support for the TI TS3A227E headset driver used in some
   Chrombeooks.
2014-12-08 15:04:02 +01:00
Mark Brown
45cbdda46b Merge remote-tracking branches 'asoc/topic/twl6040', 'asoc/topic/uda134x', 'asoc/topic/uda1380' and 'asoc/topic/wl1273' into asoc-next 2014-12-08 13:12:21 +00:00
Mark Brown
4c90877646 Merge remote-tracking branches 'asoc/topic/rt5645', 'asoc/topic/rt5670', 'asoc/topic/rt5677', 'asoc/topic/samsung' and 'asoc/topic/sgtl5000' into asoc-next 2014-12-08 13:12:09 +00:00
Mark Brown
6e6d57d07a Merge remote-tracking branches 'asoc/topic/rcar', 'asoc/topic/rockchip', 'asoc/topic/rt286' and 'asoc/topic/rt5631' into asoc-next 2014-12-08 13:12:07 +00:00
Mark Brown
c9098c6120 Merge remote-tracking branches 'asoc/topic/multi-codec', 'asoc/topic/mxs-saif', 'asoc/topic/mxs-sgtl5000', 'asoc/topic/omap' and 'asoc/topic/pxa' into asoc-next 2014-12-08 13:12:05 +00:00
Mark Brown
cfdf59b4a1 Merge remote-tracking branches 'asoc/topic/codec-mutex', 'asoc/topic/compress' and 'asoc/topic/cq93vc' into asoc-next 2014-12-08 13:11:52 +00:00
Mark Brown
0a7e4ca1aa Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ad193x', 'asoc/topic/adau1373' and 'asoc/topic/adau17x1' into asoc-next 2014-12-08 13:11:45 +00:00
Mark Brown
941725f5fa Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2014-12-08 13:11:44 +00:00
Mark Brown
3ee3f45463 Merge remote-tracking branch 'asoc/topic/cache' into asoc-next 2014-12-08 13:11:44 +00:00
Kuninori Morimoto
6cfad78961 ASoC: rsnd: rename SSI function name of PIO
Current R-Car sound SSI PIO/DMA mode are using interrupt.
it is no longer "xxx_pio_xxx", rename it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-07 13:46:38 +00:00
Jyri Sarha
50211be802 ASoC: omap-hdmi-audio: Add platform device for OMAP HDMI audio support
The platform device should only be registered from OMAPDSS HDMI
driver. The platform driver registers and unregisters all ASoC
components needed for OMAP HDMI audio.

The hdmi audio driver implements cpu-dai component using the callbacks
provided by OMAPDSS and registers the component under DSS HDMI
device. Omap-pcm is registered for platform component also under DSS
HDMI device. Dummy codec is used as as codec component. The hdmi audio
driver implements also the card and registers it under its own
platform device.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-12-01 11:09:23 +02:00
Takashi Iwai
5031466387 Merge branch 'for-linus' into for-next
The commit [7a2e9ddc: ALSA: usb-audio: Add native DSD support for
Denon/Marantz DACs] requires the new format definition that has
landed only in for-next branch.
2014-11-28 18:30:19 +01:00
Jean-Francois Moine
c362effe5c ASoC: Remove 'const' from the device_node pointers
As Russell King's explained it, there should not be pointers to
struct device_node:

"struct device_node is a ref-counted structure.  That means if you
 store a reference to it, you should "get" it, and you should "put"
 it once you've done.  The act of "put"ing the pointed-to structure
 involves writing to that structure, so it is totally unappropriate
 to store a device_node structure as a const pointer.  It forces you
 to have to cast it back to a non-const pointer at various points
 in time to use various OF function calls."

[This isn't quite the application here, we're not geting or putting the
pointer though we did add some other users who call non-const OF
functions -- broonie]

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 22:26:34 +00:00
Lars-Peter Clausen
e874bf5f76 ASoC: Disable regmap helpers if regmap is disabled
If regmap is disabled there will be no users of the ASoC regmap helpers.
Furthermore regmap_exit() will no be defined causing the following compile
error:
	sound/soc/soc-core.c: In function 'snd_soc_component_exit_regmap':
	sound/soc/soc-core.c:2645:2: error: implicit declaration of function
		'regmap_exit' [-Werror=implicit-function-declaration]

So disable the helpers if regmap is disabled.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 20feb88198 ASoC: Add helper functions for deferred regmap setup")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 21:15:31 +00:00
Jean-Francois Moine
93b0f3eeeb ASoC: core: add multi-codec support in DT
This patch exports a core function which handles the DT description
of multi-codec links (as: "sound-dai = <&hdmi 0>, <&spdif_codec>;")
and creates a CODEC component array in the DAI link.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 13:21:14 +00:00
Bard Liao
2d4e2d0205 ASoC: rt5645: multiple JD mode support
There are 3 JD modes in RT5645. This patch configure register
values according to platform data.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 12:09:48 +00:00
Lars-Peter Clausen
a6e4599f8d ASoC: uda134x: Remove is_powered_on_standby from platform data
According to its documentation the is_powered_on_standby field of the
uda134x platform data is supposed to prevent the the driver from shutting
down the ADC and DAC in standby mode. This behavior was broken in commit
commit f0fba2ad1b ("ASoC: multi-component - ASoC Multi-Component Support")
almost 5 years ago and all the flag does now is cause the driver to go to
SND_SOC_BIAS_ON in probe, just for the ASoC core to put it back into
SND_SOC_BIAS_STANDBY right after probe.

Apparently the intended behavior has not been missed, so just remove
is_powered_on_standby from the platform data struct.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:04:49 +00:00
Jussi Laako
d42472ecff ALSA: pcm: Add big-endian DSD sample formats and fix XMOS DSD sample format
This patch fixes XMOS DSD sample format to DSD_U32_BE and also adds
DSD_U16_BE and DSD_U32_BE sample formats.

Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Acked-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 15:13:28 +01:00
Takashi Iwai
a69862d8d0 Merge branch 'for-linus' into test/usb-resume 2014-11-20 21:46:04 +01:00
Mark Brown
e975cec295 Merge branch 'topic/regmap' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-ac97 2014-11-19 10:48:20 +00:00
Lars-Peter Clausen
20feb88198 ASoC: Add helper functions for deferred regmap setup
Some drivers (most notably the AC'97 drivers) do not have access to their
regmap struct when the component/codec is registered. For those drivers the
automatic regmap setup will not work and needs to be done manually,
typically from the component/CODEC drivers probe callback.

This patch adds a set of helper function to handle deferred regmap
initialization as well as early regmap tear-down.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-19 10:46:03 +00:00
Lars-Peter Clausen
358a8bb562 ASoC: ac97: Push snd_ac97 pointer to the driver level
Now that the ASoC core no longer needs a handle to the AC'97 device that is
associated with a CODEC we can remove it from the snd_soc_codec struct and
push it into the individual driver state structs like we do for other
communication buses. Doing so creates a clean separation between the AC'97
bus support and the ASoC core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:38:03 +00:00
Lars-Peter Clausen
bc26321404 ASoC: Rename snd_soc_dai_driver struct ac97_control field to bus_control
Setting the ac97_control field on a CPU DAI tells the ASoC core that this
DAI in addition to audio data also transports control data to the CODEC.
This causes the core to suspend the DAI after the CODEC and resume it before
the CODEC so communication to the CODEC is still possible. This is not
necessarily something that is specific to AC'97 and can be used by other
buses with the same requirement. This patch renames the flag from
ac97_control to bus_control to make this explicit.

While we are at it also change the type from int to bool.

The following semantich patch was used for automatic conversion of the
drivers:
// <smpl>
@@
identifier drv;
@@
struct snd_soc_dai_driver drv = {
-	.ac97_control
+	.bus_control
	=
-	1
+	true
};
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:38:03 +00:00
Lars-Peter Clausen
6794f709b7 ASoC: ac97: Drop delayed device registration
We have all the information and dependencies we need to initialize and
register the device available in snd_soc_new_ac97_codec(). So there is no
need to delay the device registration until after the card itself as been
registered.

This makes the code significantly simpler and also makes it possible to use
the AC'97 device in the CODECs probe function. The later will be required to
be able to convert the AC'97 CODEC drivers to regmap.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:37:58 +00:00
Lars-Peter Clausen
ca005f324e ASoC: ac97: Drop support for setting platform data via the CPU DAI
This has no users since commit f0fba2ad1b ("ASoC: multi-component - ASoC
Multi-Component Support") which was almost 5 years ago. Given that this runs
after CODEC probe functions have been run it also doesn't seem to be that
useful.

So drop it altogether to make the code simpler.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:37:58 +00:00
Lars-Peter Clausen
eda1a701fd ASoC: ac97: Use static ac97_bus
We always pass soc_ac97_ops to snd_soc_new_ac97_codec(). So instead of
allocating a snd_ac97_bus in snd_soc_new_ac97_codec() just use a static one
that gets initialized when snd_soc_set_ac97_ops() is called.

Also drop the device number parameter from snd_soc_new_ac97_codec(). We
currently only support one device per bus and all drivers pass 0 for the
device number. And if we should ever support multiple devices per bus it
wouldn't be up to individual AC'97 device drivers to pick their number, but
rather either the AC'97 adapter driver or the core code will assign them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:37:46 +00:00
Lars-Peter Clausen
336b8423e2 ASoC: Move AC'97 support to its own file
Currently the AC'97 support is splattered all throughout soc-core.c. Some
parts are #ifdef'd some parts are not. This patch moves the AC'97 support to
its own file, this should make the code a bit more clearer and also makes it
possible to easily not compile it into the kernel when not needed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:26:06 +00:00
Lars-Peter Clausen
bd6b87c104 ASoC: Remove CODEC mutex
The CODEC mutex is now unused and can be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-10 19:08:31 +00:00
Takashi Iwai
1fb8510cdb ALSA: pcm: Add snd_pcm_stop_xrun() helper
Add a new helper function snd_pcm_stop_xrun() to the standard sequnce
lock/snd_pcm_stop(XRUN)/unlock by a single call, and replace the
existing open codes with this helper.

The function checks the PCM running state to prevent setting the wrong
state, too, for more safety.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-09 18:20:40 +01:00
Lars-Peter Clausen
427d204c86 ASoC: Remove snd_soc_cache_sync() implementation
This function has no more non regmap user, which means we can remove the
implementation of the function and associated functions and structure
fields.

For convenience we keep a static inline version of the function that
forwards calls to regcache_sync() unconditionally.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-09 09:06:30 +00:00
Bard Liao
bb656add19 ASoC: rt5645: Add JD function support
rt5645 codec support jack detection function. The patch will set
related registers if JD function is used.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-06 12:33:49 +00:00
Takashi Iwai
ea9d0d771f ASoC: dpcm: Fix race between FE/BE updates and trigger
DPCM can update the FE/BE connection states totally asynchronously
from the FE's PCM state.  Most of FE/BE state changes are protected by
mutex, so that they won't race, but there are still some actions that
are uncovered.  For example, suppose to switch a BE while a FE's
stream is running.  This would call soc_dpcm_runtime_update(), which
sets FE's runtime_update flag, then sets up and starts BEs, and clears
FE's runtime_update flag again.

When a device emits XRUN during this operation, the PCM core triggers
snd_pcm_stop(XRUN).  Since the trigger action is an atomic ops, this
isn't blocked by the mutex, thus it kicks off DPCM's trigger action.
It eventually updates and clears FE's runtime_update flag while
soc_dpcm_runtime_update() is running concurrently, and it results in
confusion.

Usually, for avoiding such a race, we take a lock.  There is a PCM
stream lock for that purpose.  However, as already mentioned, the
trigger action is atomic, and we can't take the lock for the whole
soc_dpcm_runtime_update() or other operations that include the lengthy
jobs like hw_params or prepare.

This patch provides an alternative solution.  This adds a way to defer
the conflicting trigger callback to be executed at the end of FE/BE
state changes.  For doing it, two things are introduced:

- Each runtime_update state change of FEs is protected via PCM stream
  lock.
- The FE's trigger callback checks the runtime_update flag.  If it's
  not set, the trigger action is executed there.  If set, mark the
  pending trigger action and returns immediately.
- At the exit of runtime_update state change, it checks whether the
  pending trigger is present.  If yes, it executes the trigger action
  at this point.

Reported-and-tested-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-11-04 17:18:32 +00:00
Takashi Iwai
2b30d411db ALSA: pcm: Add xrun_injection proc entry
This patch adds a new proc entry for PCM substreams to inject an
XRUN.  When a PCM substream is running and any value is written to its
xrun_injection proc file, the driver triggers XRUN.  This is a useful
feature for debugging XRUN and error handling code paths.

Note that this entry is enabled only when CONFIG_SND_PCM_XRUN_DEBUG is
set.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04 14:09:16 +01:00
Lars-Peter Clausen
313665b983 ASoC: Remove card field from snd_soc_dai struct
The card field of the snd_soc_dai field is very rarely used. We can use
dai->component->card instead and remove the card field from the snd_soc_dai
struct.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04 11:53:53 +00:00
Mark Brown
ff1b1c3fef Merge branch 'topic/dapm' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-core 2014-11-04 11:53:49 +00:00
Lars-Peter Clausen
2a374b78f5 ASoC: Remove platform field from snd_soc_dai
Typically a DAI does not need direct access to the platform. Currently the
only user of this field is in a platform driver where we have a more direct
way of getting a pointer to the platform. This patch updates the driver to
use the more direct way and then removes the platform field from the
snd_soc_dai struct.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03 12:17:07 +00:00
Lars-Peter Clausen
dd63a9c295 ASoC: Remove snd_soc_platform_driver suspend/resume callbacks
Those are unused and new drivers should use device driver suspend/resume.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03 12:17:07 +00:00
Takashi Iwai
85926e0fe8 ALSA: pcm: Convert params_*() with static inline functions
... and add proper kerneldoc comments.
There is no big reason to keep them as macros.  Static inline
functions are safer in general, and suitable for kerneldoc, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 15:42:32 +01:00
Takashi Iwai
30b771cf8c ALSA: pcm: More kerneldoc updates
Add proper kerneldoc comments to the exported functions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 15:42:27 +01:00
Takashi Iwai
f213d8f79a ALSA: pcm: Use static inline for snd_pcm_lib_alloc_vmalloc_buffer()
... instead of #if 0 hack.  It's more straightforward and obvious.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 13:48:29 +01:00
Takashi Iwai
e83280f96f ALSA: doc: Fix enum snd_jack_types comments
Follow the proper kerneldoc rule, and complete enum item comments.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-29 08:20:46 +01:00
Vinod Koul
859b2e374a ALSA: compress: fix documentation errors
Some structure documentation was not right so fix it now

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-28 17:40:27 +01:00
Takashi Iwai
7b366d5f16 ALSA: jack: Fix kerneldoc comments
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-28 15:47:30 +01:00
Lars-Peter Clausen
c1b4d1c777 ASoC: Use generic control handlers for S8 control
Commit f227b88f0f ("ASoC: core: Add signed register volume control logic")
added support for signed control to the generic volsw control handler.
This makes it possible to use them for the S8 control as well, rather than
having to use a custom control handler implementation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-28 00:20:51 +00:00
Lars-Peter Clausen
92a99ea439 ASoC: dapm: Use more aggressive caching
Currently we cache the number of input and output paths going to/from a
widget only within a power update sequence. But not in between power update
sequences.

But we know how changes to the DAPM graph affect the number of input (form a
source) and output (to a sink) paths of a widget and only need to
recalculate them if a operation has been performed that might have changed
them.
	* Adding/removing or connecting/disconnecting a path means that the for
	  the source of the path the number of output paths can change and for
	  the sink the number of input paths can change.
	* Connecting/disconnecting a widget has the same effect has connecting/
	  disconnecting all paths of the widget. So for the widget itself the
	  number of inputs and outputs can change, for all sinks of the widget
	  the number of inputs can change and for all sources of the widget the
	  number of outputs can change.
	* Activating/Deactivating a stream can either change the number of
	  outputs on the sources of the widget associated with the stream or the
	  number of inputs on the sinks.

Instead of always invalidating all cached numbers of input and output paths
for each power up or down sequence this patch restructures the code to only
invalidate the cached numbers when a operation that might change them has
been performed. This can greatly reduce the number of DAPM power checks for
some very common operations.

Since per DAPM operation typically only either change the number of inputs
or outputs the number of path checks is reduced by at least 50%. The number
of neighbor checks is also reduced about the same percentage, but since the
number of neighbors encountered when walking from sink to source is not the
same as when walking from source to sink the actual numbers will slightly
vary from card to card (e.g. for a mixer we see 1 neighbor when walking from
source to sink, but the number of inputs neighbors when walking from source
to sink).

Bigger improvements can be observed for widgets with multiple connected
inputs and output (e.g. mixers probably being the most widespread form of
this). Previously we had to re-calculate the number of inputs and outputs
on all input and output paths. With this change we only have to re-calculate
the number of outputs on the input path that got changed and the number of
inputs on the output paths.

E.g. imagine the following example:

	A --> B ----.
	            v
	M --> N --> Z <-- S <-- R
	            |
	            v
	            X

Widget Z has multiple input paths, if any change was made that cause Z to be
marked as dirty the power state of Z has to be re-computed. This requires to
know the number of inputs and outputs of Z, which requires to know the
number of inputs and outputs of all widgets on all paths from or to Z.
Previously this meant re-computing all inputs and outputs of all the path
going into or out of Z. With this patch in place only paths that actually
have changed need to be re-computed.

If the system is idle (or the part of the system affected by the changed
path) the number of path checks drops to either 0 or 1, regardless of how
large or complex the DAPM context is. 0 if there is no connected sink and no
connected source. 1 if there is either a connected source or sink, but not
both. The number of neighbor checks again will scale accordingly and will be
a constant number that is the number of inputs or outputs of the widget for
which we did the path check.

When loading a state file or switching between different profiles typically
multiple mixer and mux settings are changed, so we see the benefit of this
patch multiplied for these kinds of operations.

Testing with the ADAU1761 shows the following changes in DAPM stats for
changing a single Mixer switch for a Mixer with 5 inputs while the DAPM
context is idle.

         Power  Path  Neighbour
Before:  2      12    30
After:   2       1     2

For the same switch, but with a active playback stream the stat changed are
as follows.

         Power  Path  Neighbour
Before:  10     20    54
After:   10      7    21

Cumulative numbers for switching the audio profile which changes 7 controls
while the system is idle:

         Power  Path  Neighbour
Before:  16      80   170
After:   16       7    23

Cumulative numbers for switching the audio profile which changes 7 controls
while playback is active:

         Power  Path  Neighbour
Before:  51     123   273
After:   51      29   109

Starting (or stopping) the playback stream:

         Power  Path  Neighbour
Before:  34     34    117
After:   34     17    69

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-28 00:19:59 +00:00
Lars-Peter Clausen
8be4da29cf ASoC: dapm: Mark endpoints instead of IO widgets dirty during suspend/resume
The state of endpoint widgets is affected by that card's power state.
Endpoint widgets that do no have the ignore_suspend flag set will be
considered inactive during suspend. So they have to be re-checked and marked
dirty after the card's power state changes. Currently the input and output
widgets are marked dirty instead, this works most of the time since
typically a path from one endpoint to another will go via a input or output
widget. But marking the endpoints dirty is technically more correct and will
also work for odd corner cases.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-28 00:19:59 +00:00
Lars-Peter Clausen
c1862c8bae ASoC: dapm: Add a flag to mark paths connected to supply widgets
Supply widgets do not count towards the input and output widgets of their
neighbors and for supply widgets themselves we do not care for the number
of input or output paths. This means that a path that connects to a supply
widget effectively behaves the same as a path that as the weak property set.
This patch adds a new path flag that gets set to true when the path is
connected to at least one supply widget. If a path with the flag set is
encountered in is_connected_{input,output}_ep() is is skipped in the same
way that weak paths are skipped. This slightly brings down the number of
path checks.

Since both the weak and the supply flag are implemented as bitfields which
are stored in the same word there is no runtime overhead due to checking
both rather than just one and also the size of the path struct is not
increased by this patch. Another advantage is that we do not have to handle
supply widgets in is_connected_{input,output}_ep() anymore since it will
never be called for supply widgets. The only exception is from
dapm_widget_power_read_file() where a check is added to special case supply
widgets.

Testing with the ADAU1761, which has a handful of supply widgets, shows the
following changes in the DAPM stats for a playback stream start.

         Power  Path  Neighbour
Before:  34     78    117
After:   34     48    117

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-28 00:19:59 +00:00
Lars-Peter Clausen
6dd98b0a3e ASoC: dapm: Introduce toplevel widget categories
DAPM widgets can be classified into four categories:
	* supply: Supply widgets do not affect the power state of their
		non-supply widget neighbors and unlike other widgets a
		supply widget is not powered up when it is on an active
		path, but when at least on of its neighbors is powered up.
	* source: A source is a widget that receives data from outside the
		DAPM graph or generates data. This can for example be a
		microphone, the playback DMA or a signal generator. A source
		widget will be considered powered up if there is an active
		path to a sink widget.
	* sink: A sink is a widget that transmits data to somewhere outside
		of the DAPM graph. This can e.g. be a speaker or the capture
		DMA. A sink widget will be considered powered up if there is
		an active path from a source widget.
	* normal: Normal widgets are widgets not covered by the categories
		above. A normal widget will be considered powered up if it
		is on an active path between a source widget and a sink
		widget.

The way the number of input and output paths for a widget is calculated
depends on its category. There are a bunch of factors which decide which
category a widget is. Currently there is no formal classification of these
categories and we calculate the category of the widget based on these
factors whenever we want to know it. This is at least once for every widget
during each power update sequence. The factors which determine the category
of the widgets are mostly static though and if at all change rather seldom.
This patch introduces three new per widget flags, one for each of non-normal
widgets categories. Instead of re-computing the category each time we want
to know them the flags will be checked. For the majority of widgets the
category is solely determined by the widget id, which means it never changes
and only has to be set once when the widget is created. The only widgets
with dynamic categories are:

	snd_soc_dapm_dai_out: Is considered a sink iff the capture stream is
		active, otherwise normal.
	snd_soc_dapm_dai_in: Is considered a source iff the playback stream
		is active, otherwise normal.
	snd_soc_dapm_input: Is considered a sink iff it has no outgoing
		paths, otherwise normal.
	snd_soc_dapm_output: Is considered a source iff it has no incoming
		paths, otherwise normal.
	snd_soc_dapm_line: Is considered a sink iff it has no outgoing paths
		and is considered a source iff it has no incoming paths,
		otherwise normal.

For snd_soc_dapm_dai_out/snd_soc_dapm_dai_in widgets the category will be
updated when a stream is started or stopped. For the other dynamic widgets
the category will be updated when a path connecting to it is added or
removed.

Introducing those new widget categories allows to make
is_connected_{output,input}_ep, which are among the hottest paths of the
DAPM algorithm, more generic and significantly shorter.

The before and after sizes for is_connected_{output,input}_ep are:

On ARM (defconfig + CONFIG_SND_SOC):
	function                                     old     new   delta
	is_connected_output_ep                       480     340    -140
	is_connected_input_ep                        456     352    -104

On amd64 (defconfig + CONFIG_SND_SOC):
	function                                     old     new   delta
	is_connected_output_ep                       579     427    -152
	is_connected_input_ep                        563     427    -136

Which is about a 25%-30% decrease, other architectures are expected to have
similar numbers. At the same time the size of the snd_soc_dapm_widget struct
does not change since the new flags are stored in the same word as the
existing flags.

Note: that since the per widget 'ext' flag was only used to decide whether a
snd_soc_dapm_input or snd_soc_dapm_output widget was a source or a sink it
is now unused and can be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-28 00:19:59 +00:00
Lars-Peter Clausen
130897ac5a ASoC: dapm: Remove path 'walked' flag
The 'walked' flag was used to avoid walking paths that have already been
walked. But since we started caching the number of inputs and outputs of a
path we never actually get into a situation where we try to walk a path that
has the 'walked' flag set.

There are two cases in which we can end up walking a path multiple times
within a single run of is_connected_output_ep() or is_connected_input_ep().

1) If a path splits up and rejoins later:

	     .--> C ---v
	A -> B         E --> F
	     '--> D ---^

When walking from A to F we'll end up at E twice, once via C and once via D.
But since we do a depth first search we'll fully discover the path and
initialize the number of outputs/inputs of the widget the first time we get
there. The second time we get there we'll use the cached value and not
bother to check any of the paths again. So we'll never see a path where
'walked' is set in this case.

2) If there is a circle:

	A --> B <-- C <-.--> F
	      '--> D ---'

When walking from A to F we'll end up twice at B. But since there is a
circle the 'walking' flag will still be set on B once we get there the
second time. This means we won't look at any of it's outgoing paths. So in
this case we won't ever see a path where 'walked' is set either.

So it is safe to remove the flag. This on one hand means we remove some
always true checks from one of the hottest paths of the DAPM algorithm and
on the other hand means we do not have to do the tedious clearing of the
flag after checking the number inputs or outputs of a widget.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-22 12:11:38 +01:00
Oder Chiou
5e3363ad1b ASoC: rt5677: add GPIO IRQ support
This allows to enable Mic Jack detection feature

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Modified-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-22 11:43:14 +01:00
Takashi Iwai
930352862e Merge branch 'topic/enum-info-cleanup' into for-next
this is a series of patches to just convert the plain info callback
for enum ctl elements to snd_ctl_elem_info().  Also, it includes the
extension of snd_ctl_elem_info(), for catching the unexpected string
cut-off and handling the zero items.
2014-10-22 12:19:57 +02:00
Anatol Pomozov
40eb90a18e ASoC: rt5677: Add option to configure gpio as floating/pullup/pulldown
gpio_config is array of 6 elements that allows to set GPIO as
floating, pullup, pulldown.

Sponsored: Google ChromeOS
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20 12:22:20 +01:00
Takashi Iwai
b566762a67 Merge branch 'topic/seq-autoload' into for-next 2014-10-20 08:45:52 +02:00
Linus Torvalds
52d589a01d Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:
 "For dmaengine contributions we have:
   - designware cleanup by Andy
   - my series moving device_control users to dmanegine_xxx APIs for
     later removal of device_control API
   - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma
     etc"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits)
  serial: atmel: add missing dmaengine header
  dmaengine: remove FSLDMA_EXTERNAL_START
  dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method
  carma-fpga: move to fsl_dma_external_start()
  carma-fpga: use dmaengine_xxx() API
  dmaengine: freescale: add and export fsl_dma_external_start()
  dmaengine: add dmaengine_prep_dma_sg() helper
  video: mx3fb: use dmaengine_terminate_all() API
  serial: sh-sci: use dmaengine_terminate_all() API
  net: ks8842: use dmaengine_terminate_all() API
  mtd: sh_flctl: use dmaengine_terminate_all() API
  mtd: fsmc_nand: use dmaengine_terminate_all() API
  V4L2: mx3_camer: use dmaengine_pause() API
  dmaengine: coh901318: use dmaengine_terminate_all() API
  pata_arasan_cf: use dmaengine_terminate_all() API
  dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause()
  dmaengine: dw: export probe()/remove() and Co to users
  dmaengine: dw: enable and disable controller when needed
  dmaengine: dw: always export dw_dma_{en,dis}able
  dmaengine: dw: introduce dw_dma_on() helper
  ...
2014-10-18 18:11:04 -07:00
Takashi Iwai
68ab61084d ALSA: seq: bind seq driver automatically
Currently the sequencer module binding is performed independently from
the card module itself.  The reason behind it is to keep the sequencer
stuff optional and allow the system running without it (e.g. for using
PCM or rawmidi only).  This works in most cases, but a remaining
problem is that the binding isn't done automatically when a new driver
module is probed.  Typically this becomes visible when a hotplug
driver like usb audio is used.

This patch tries to address this and other potential issues.  First,
the seq-binder (seq_device.c) tries to load a missing driver module at
creating a new device object.  This is done asynchronously in a workq
for avoiding the deadlock (modprobe call in module init path).

This action, however, should be enabled only when the sequencer stuff
was already initialized, i.e. snd-seq module was already loaded.  For
that, a new function, snd_seq_autoload_init() is introduced here; this
clears the blocking of autoloading, and also tries to load all pending
driver modules.

Reported-by: Adam Goode <agoode@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-18 20:25:12 +02:00
Takashi Iwai
8df22a4d6f ASoC: Updates for v3.18
- More componentisation work from Lars-Peter, this time mainly
    cleaning up the suspend and bias level transition callbacks.
  - Real system support for the Intel drivers and a bunch of fixes and
    enhancements for the associated CODEC drivers, this is going to need
    a lot quirks over time due to the lack of any firmware description of
    the boards.
  - Jack detect support for simple card from Dylan Reid.
  - A bunch of small fixes and enhancements for the Freescale drivers.
  - New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32, Everest
    Semiconductor ES8328 and Freescale cards using the ASRC in newer i.MX
    processors.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUMoHRAAoJECTWi3JdVIfQGXUH/RWQ6/Ey70SPgUdWWQ42PFey
 sBq/Hl69F8/JNxW6EDA4GEg6ue880Gek0oGqioxtN6Ku0Vm/WSqDWnKcTAGl4dDO
 AefC4FwekZWCYQi3VTNIvMEqfUWkcofTLVwjdh/PUZxniahkiGA81UJ1mQNXBxLF
 UusrK0fIAxQgiNsCcPZ94knJiqZVBWgbRv/mCXY9K1/jqITNKd/ZVEMkOPk/p00q
 cH9LIx8EknRV3HyJNZQ0xpmhpuMzLy6Agf7Oeq/m5kDqq1stmClvibPYkdqkdkto
 jYwKaPh18dNHlUmm1w/G7X20kCidhbiwRjS/iIzx3cfIrWkiz90/BSRFKs8pqSo=
 =7PPg
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.18

 - More componentisation work from Lars-Peter, this time mainly
   cleaning up the suspend and bias level transition callbacks.
 - Real system support for the Intel drivers and a bunch of fixes and
   enhancements for the associated CODEC drivers, this is going to need
   a lot quirks over time due to the lack of any firmware description of
   the boards.
 - Jack detect support for simple card from Dylan Reid.
 - A bunch of small fixes and enhancements for the Freescale drivers.
 - New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32, Everest
   Semiconductor ES8328 and Freescale cards using the ASRC in newer i.MX
   processors.
2014-10-06 14:01:11 +02:00
Mark Brown
7370780cfd Merge remote-tracking branches 'asoc/topic/rt5645', 'asoc/topic/rt5677', 'asoc/topic/samsung', 'asoc/topic/sgtl5000' and 'asoc/topic/sh' into asoc-next 2014-10-06 12:49:03 +01:00
Mark Brown
565fefdf31 Merge remote-tracking branches 'asoc/topic/davinci', 'asoc/topic/dmic', 'asoc/topic/drivers', 'asoc/topic/es8328' and 'asoc/topic/fsl' into asoc-next 2014-10-06 12:48:57 +01:00
Mark Brown
64fdf13c8b Merge remote-tracking branch 'asoc/topic/dapm' into asoc-next 2014-10-06 12:48:52 +01:00
Mark Brown
97c53e26f0 Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2014-10-06 12:48:52 +01:00
Mark Brown
5bcaca4b5b Merge remote-tracking branch 'asoc/topic/component' into asoc-next 2014-10-06 12:48:51 +01:00
Subhransu S. Prusty
5dc0158a27 ASoC: Export dapm_kcontrol_get_value
The DSP driver needs to know widget control value in its event handler for
widgets like mixers. This is required in the subsequent patches

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-02 19:13:12 +01:00
Oder Chiou
f3fa1bbd83 ASoC: rt5645: Add headset detect function
Add headset detect function

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-01 19:28:44 +01:00
Anatol Pomozov
6f67c38005 ASoC: rt5677: Add dts properties for input/output differential configuration
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-29 19:46:20 +01:00
Lars-Peter Clausen
0bd2ac3dae ASoC: Remove CODEC pointer from snd_soc_dapm_context
The only remaining user of the CODEC pointer in the DAPM struct is to
initialize the CODEC pointer in the widget struct. The later is scheduled
for removal, but has still a few users left. For now use
dapm->component->codec to initialize it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-29 18:25:52 +01:00
Takashi Iwai
7639913f72 Merge branch 'topic/hda-jack-rework' into for-next
This is a merge of rework of HD-audio jack event handling code.
It extends the jack table to allow multiple callbacks.
2014-09-22 10:12:16 +02:00
Takashi Iwai
db0a5214b8 ALSA: vx: Use nonatomic PCM ops
Rewrite VXpocket and VX222 drivers to use the new PCM nonatomic ops.
The former irq tasklet is replaced with a threaded irq handler, and
the tasklet for the PCM delayed start is simply merged into the normal
PCM trigger, as well as the replacement of spinlock with mutex.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-15 15:52:03 +02:00
Takashi Iwai
998052b745 Merge branch 'for-linus' into for-next
Merging for-linus branch for syncing the latest STAC/IDT codec
changes to be affected by the upcoming hda-jack rewrites.
2014-09-11 13:43:49 +02:00
Andy Shevchenko
3d598f47e8 dmaengine: dw: move dw_dmac.h to where it belongs to
There is a common storage for platform data related structures and definitions
inside kernel source tree. The patch moves file from include/linux to
include/linux/platform_data and renames it acoordingly. The users are also
updated.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[For the arch/avr32/.* and .*sound/atmel.*]
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 11:48:12 +05:30
Jurgen Kramer
d4288d3fac ALSA: pcm: add new DSD sampleformat for native DSD playback on XMOS based devices
XMOS based USB DACs with native DSD support expose this feature via a USB
alternate setting. The audio format is either 32-bit raw or a 32-bit PCM format.
To utilize this feature on linux this patch introduces a new 32-bit DSD
sampleformat DSD_U32_LE.
A follow up patch will add a quirk for XMOS based devices to utilize the new format.
Further patches will add support to alsa-lib.

Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-08 17:11:00 +02:00
Lars-Peter Clausen
0634814fe0 ASoC: Remove table based DAPM/control setup support from snd_soc_platform_driver
There are no users left and new users should rather use the component_driver
struct embedded in the snd_soc_platform_driver struct to do this. E.g.:

static const struct snd_soc_platform_driver foobar_driver = {
	.component_driver = {
		.dapm_widgets = ...,
		.num_dapm_widgets = ...,
		...,
	},
	...
};

instead of

static const struct snd_soc_platform_driver foobar_driver = {
	.dapm_widgets = ...,
	.num_dapm_widgets = ...,
	...
};

This also allows us to remove the steal_sibling_dai_widgets hack.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-09-06 14:46:30 +01:00
Lars-Peter Clausen
c815dbb477 ASoC: Add snd_soc_component_{get,set}_drvdata()
Add Add snd_soc_component_{get,set}_drvdata() similar to
snd_soc_codec_{get,set}_drvdata() and snd_soc_platform_{get,set}_drvdata().
Also update them to use the new functions internally.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-09-06 14:42:47 +01:00
Lars-Peter Clausen
86dbf2ac6f ASoC: Add support for automatically going to BIAS_OFF on suspend
There is a substantial amount of drivers that in go to SND_SOC_BIAS_OFF on
suspend and go back to SND_SOC_BIAS_SUSPEND on resume (Often this is even
the only thing done in the suspend and resume handlers). This patch
introduces a new suspend_bias_off flag, which when set by a driver will let
the ASoC core automatically put the device's DAPM context at the
SND_SOC_BIAS_OFF level during suspend. Once the device is resumed the DAPM
context will go back to SND_SOC_BIAS_STANDBY (if the context is idle,
otherwise to SND_SOC_BIAS_ON).

This will allow us to remove a fair bit of duplicated code from the drivers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04 20:10:25 +01:00
Takashi Iwai
7af142f752 ALSA: pcm: Uninline snd_pcm_stream_lock() and _unlock()
The previous commit for the non-atomic PCM ops added more codes to
snd_pcm_stream_lock() and its variants.  Since they are inlined
functions, it resulted in a significant code size bloat.  For reducing
the size bloat, this patch changes the inline functions to the normal
function calls.  The export of rwlock and rwsem are removed as well,
since they are referred only in pcm_native.c now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-03 14:04:18 +02:00
Takashi Iwai
257f8cce5d ALSA: pcm: Allow nonatomic trigger operations
Currently, many PCM operations are performed in a critical section
protected by spinlock, typically the trigger and pointer callbacks are
assumed to be atomic.  This is basically because some trigger action
(e.g. PCM stop after drain or xrun) is done in the interrupt handler.
If a driver runs in a threaded irq, however, this doesn't have to be
atomic.  And many devices want to handle trigger in a non-atomic
context due to lengthy communications.

This patch tries all PCM calls operational in non-atomic context.
What it does is very simple: replaces the substream spinlock with the
corresponding substream mutex when pcm->nonatomic flag is set.  The
driver that wants to use the non-atomic PCM ops just needs to set the
flag and keep the rest as is.  (Of course, it must not handle any PCM
ops in irq context.)

Note that the code doesn't check whether it's atomic-safe or not, but
trust in 100% that the driver sets pcm->nonatomic correctly.

One possible problem is the case where linked PCM substreams have
inconsistent nonatomic states.  For avoiding this, snd_pcm_link()
returns an error if one tries to link an inconsistent PCM substream.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-03 14:04:08 +02:00
Jarkko Nikula
b792346fa8 ASoC: Remove unused cache_only from struct snd_soc_codec
There are no real users for cache_only in "struct snd_soc_codec" so remove
it and needless debugfs node.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-28 19:05:57 +01:00
Bard Liao
2d15d97461 ASoC: rt5677: Add DMIC2 clock selection
There are two pins can be used for rt5677's DMIC2 clock. This patch
add the select options for it.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-27 16:54:39 +01:00
Lars-Peter Clausen
75af7c0819 ASoC: Remove support for legacy snd_soc_platform IO
There were never any actual users of this in upstream and by we have with
regmap a replacement in place, which should be used by new drivers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19 10:59:47 -05:00
Lars-Peter Clausen
886f569225 ASoC: Automatically initialize regmap for all components
So far regmap is only automatically initialized for CODECs. Now that we have the
infrastructure in place to let components have DAPM widgets and controls that
want to use the generic regmap based IO also make sure to automatically
initialize regmap for all components.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19 10:59:47 -05:00
Lars-Peter Clausen
57bf772687 ASoC: Pass component instead of DAPM context to AUX dev init callback
Given that the component is the containing structure it makes more sense to pass
the component rather than the DAPM context to the AUX dev init callback.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19 10:59:46 -05:00
Lars-Peter Clausen
65d9361f0c ASoC: Move AUX dev support to the component level
This patch makes it possible to register arbitrary components as a AUX dev
for a card. This was previously only possible for CODEC components. With
componentization having made it possible for components to have DAPM contexts
and controls there is no reason why AUX devs should be artificially limited to
snd_soc_codec devices.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19 10:59:45 -05:00
Lars-Peter Clausen
61aca5646b ASoC: Add component level probe/remove support
Now that we have a unified probe and remove path make sure to call them for all
components. soc_{probe,remove}_component are responsible for setting up the DAPM
context for the component, initialize the component prefix, manage the debugfs
entries as well as do the registration of table based controls and DAPM
elements. They also call the component drivers probe and remove callbacks. This
patch makes these things available for generic snd_soc_component drivers rather
than only having them for snd_soc_codec and snd_soc_platform drivers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19 10:59:45 -05:00
Lars-Peter Clausen
f1d45cc3ae ASoC: Consolidate platform and CODEC probe/remove
The platform and CODEC probe and remove code is now largely identical. This
patch consolidates it at the component level.

The resulting code is slightly larger due to all the boiler plate code setting
up the indirection for the table based control and DAPM registration.  Once all
drivers have been update to no longer use the snd_soc_codec_driver and
snd_soc_platform_driver specific fields for this the indirection can be removed
again.

This patch contains two noteworthy hacks that are only meant to be temporary to
be able to update drivers and the core in separate incremental patches.

The first hack is related to that some DPCM platforms expect that the DAPM
widgets for the DAIs of a snd_soc_component are created in the DAPM context of
the snd_soc_platform that has the same parent device. For handling this the
steal_sibling_dai_widgets attribute is introduced. It gets set for
snd_soc_platforms that register DAPM elements. When creating the DAI widgets for
a component this flag is checked and if it is found on one of the siblings the
component will not create any DAI widgets in its own DAPM context. If the
attribute is set on a platform it will look for siblings components and create
DAI widgets for them in its own context. The fix for this will be to update
the offending drivers to only register a single component rather than two.

The second hack deals with the fact that the ASoC card suspend and resume code
still needs a list of CODECs that have been registered for the card. To handle
this the generic probe and remove path have a check to see if the component is
CODEC and if yes add/remove it to the card's CODEC list. While it is possible to
clean up the suspend/resume code to not need the CODEC list anymore this is a
bit of a chicken and egg problem since it will become easier to clean up the
suspend/resume code once there is a unified component layer.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19 10:59:45 -05:00
Lars-Peter Clausen
81c7cfd1b2 ASoC: Move debugfs registration to the component level
The debugfs registration is mostly identical between platforms and CODECs. This
patches consolidates the two implementations at the component level.

Unfortunately there are still a couple of CODEC specific debugfs files that are
related to legacy ASoC IO that need to be registered. For this a new callback is
added to the component struct that will be initialized when a CODEC is
registered and will be used to register the CODEC specific files. Once there are
no drivers left using legacy IO this can be removed again.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19 10:59:45 -05:00
Subhransu S. Prusty
4d61b39bc1 ASoC: core: fix .info for SND_SOC_BYTES_TLV
Commit 7523a271 - "ASoC: core: add a helper for extended byte controls using
TLV" introduced support for TLV byte controls but had a typo for the info
function, so fix the same

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-18 08:59:12 -05:00
Sylwester Nawrocki
8ad9f9efcc ASoC: Drop const from struct snd_soc_dai_link *of_node members
Dropping the const qualifiers prevents "passing argument 1 of ‘of_node_put’
discards ‘const’ qualifier from pointer target type" type warnings when
compiling the code dropping reference to cpu_of_node, codec_of_node or
platform_of_node with with an of_node_put() function call.

This lets us to avoid casting to struct device_node * or caching variables
internally in drivers just to be able to properly drop a reference to the
OF node on clean up paths.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16 17:02:54 -05:00
Takashi Iwai
e9e3bdffe3 ASoC: Updates for v3.17
This has been a pretty exciting release in terms of the framework, we've
 finally got support for multiple CODECs attached to a single DAI link
 which has been something there's been interest in as long as I've been
 working on ASoC.  A big thanks to Benoit and Misael for their work on
 this.
 
 Otherwise it's been a fairly standard release for development, including
 more componentisation work from Lars-Peter and a good selection of both
 CODEC and CPU drivers.
 
  - Support for multiple CODECs attached to a single DAI, enabling
    systems with for example multiple DAC/speaker drivers on a single
    link, contributed by Benoit Cousson based on work from Misael Lopez
    Cruz.
  - Support for byte controls larger than 256 bytes based on the use of
    TLVs contributed by Omair Mohammed Abdullah.
  - More componentisation work from Lars-Peter Clausen.
  - The remainder of the conversions of CODEC drivers to params_width()
  - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
    RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments
    TAS2552.
  - Lots of updates and fixes, especially to the DaVinci, Intel,
    Freescale, Realtek, and rcar drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT37EhAAoJELSic+t+oim9ELcP/j4ve2Zb3zqVn+md2fJNLFt6
 7rD8eZTvy9XEoYVLIxNOroiM4Dl6m0FlA3gigzbpHLRUlZWH6JB1EDsn/kuB910Y
 E9T76HVzznUtmoEbbo2CRYelsO2I3RmlpJWYrzfkwQVAnSd+tQmWixypZzKEJcvP
 F+1gUA5DlTnSrDtFAcA0n5xhqczbrJ51l5l2irVf1eKdWTepixk0tMBonadb/s3V
 Uh+EPl2htEmjpo4fHDzcULGCQABtiPn9ebV4urQnhWMifJehk5md9WyQchaRCz8c
 95ERNc+hLbrTUEALSgI46PWP497hdz4kd1B1jahLGSnWqRIgm/NwyhjqC47kgJfv
 8006v4nY4+T8d1yU4kFpB72f/xL6dxI53K6jRkie2WUQy+4L7kNp3egDJ4at9MdA
 iFSq+XzOmN978XVlYOj/9KXVS/fpgslYYwa+omok45MbqCWg8EZbWdFwv/uXlbza
 ldDjPKvz5LYfnSNES30Q29TMKnqvmdbIzbgqWPnT2RR4x0mxT6MWh5yM0WBBXqNV
 TM791q5cgUr07+f8LeeCS5J99H0OuElqn0OPIWOcqN2MI4Qp+8ZuswBCQtZ6i1V7
 oleSIPc4clchsXuRF83vD4JjZYkx7wqTOmmRHbKDB4d/LFLH3J2DHJH99CD1IX0a
 4J4h5Bmi2f3CCih7KLBD
 =pnce
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.17

This has been a pretty exciting release in terms of the framework, we've
finally got support for multiple CODECs attached to a single DAI link
which has been something there's been interest in as long as I've been
working on ASoC.  A big thanks to Benoit and Misael for their work on
this.

Otherwise it's been a fairly standard release for development, including
more componentisation work from Lars-Peter and a good selection of both
CODEC and CPU drivers.

 - Support for multiple CODECs attached to a single DAI, enabling
   systems with for example multiple DAC/speaker drivers on a single
   link, contributed by Benoit Cousson based on work from Misael Lopez
   Cruz.
 - Support for byte controls larger than 256 bytes based on the use of
   TLVs contributed by Omair Mohammed Abdullah.
 - More componentisation work from Lars-Peter Clausen.
 - The remainder of the conversions of CODEC drivers to params_width()
 - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
   RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments
   TAS2552.
 - Lots of updates and fixes, especially to the DaVinci, Intel,
   Freescale, Realtek, and rcar drivers.
2014-08-04 18:28:21 +02:00
Mark Brown
e99a866c4c Merge remote-tracking branches 'asoc/topic/tlv320aic3x', 'asoc/topic/width', 'asoc/topic/wm0010', 'asoc/topic/wm8904' and 'asoc/topic/wm8962' into asoc-next 2014-08-04 16:32:18 +01:00
Mark Brown
c5e64c7636 Merge remote-tracking branches 'asoc/topic/tlv', 'asoc/topic/tlv320aic23', 'asoc/topic/tlv320aic31xx' and 'asoc/topic/tlv320aic32x4' into asoc-next 2014-08-04 16:32:12 +01:00
Mark Brown
3510a69495 Merge remote-tracking branches 'asoc/topic/sigmadsp', 'asoc/topic/sirf', 'asoc/topic/spdif', 'asoc/topic/tas2552' and 'asoc/topic/tas5086' into asoc-next 2014-08-04 16:32:07 +01:00
Mark Brown
c1bd940afd Merge remote-tracking branches 'asoc/topic/rt5670', 'asoc/topic/rt5677', 'asoc/topic/s6000', 'asoc/topic/samsung' and 'asoc/topic/sh-fsi' into asoc-next 2014-08-04 16:32:01 +01:00
Mark Brown
a6ce305207 Merge remote-tracking branches 'asoc/topic/intel', 'asoc/topic/kirkwood', 'asoc/topic/max98090' and 'asoc/topic/mc13783' into asoc-next 2014-08-04 16:31:45 +01:00
Mark Brown
2fd5373467 Merge remote-tracking branch 'asoc/topic/rcar' into asoc-next 2014-08-04 16:31:20 +01:00
Mark Brown
7196be58ca Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2014-08-04 16:31:17 +01:00
Mark Brown
a1cb98ac8b Merge remote-tracking branch 'asoc/topic/component' into asoc-next 2014-08-04 16:31:15 +01:00
Nicolin Chen
d7821953cf ASoC: wm8962: Let CODEC driver enable and disable its own MCLK
snd_soc_open() will trigger pm_runtime resume() which will then enable
the regulator and initialization. So we should make sure the MCLK is
enabled before this resume().

Previously we let the machine driver get the clock and enable it in
its probe(). However, considering about power saving, it'll be better
to enable it when it's going to be used and disable it after using.

So this patch just simply adds clk_get() and clk_enable() to WM8962
driver. Meanwhile, it marks clock pointer to NULL if no clock assigned
to it so it will not break any current function.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31 20:51:26 +01:00
Lars-Peter Clausen
0f2780ad4c ASoC: Add function to register component controls
We have now everything in place to actual let a component register controls. Add
a function which allows to do so.

Also update snd_soc_add_codec_controls() and snd_soc_platform_controls() to use
this new function internally. And while we are at it also change the
num_controls parameter of those two functions from int to unsigned int.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-22 23:15:57 +01:00
Lars-Peter Clausen
00200107a2 ASoC: Move card field form platform/codec to component
Both the snd_soc_codec and snd_soc_platform struct do have a pointer to the
parent card and both handle this pointer in mostly the same way. This patch
moves the card field to the component level which will allow further code
consolidation between platforms and CODECS.

Since there are only a handful of users of the snd_soc_codec struct's card field
(and none of the snd_soc_platform's) these are update in this patch as well,
which allows it to be removed from the snd_soc_codec struct.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-22 23:15:57 +01:00
Lars-Peter Clausen
9898e1ccf5 ASoC: Remove per card platform list
The platform_dev_list was added in commit f0fba2ad1b ("ASoC: multi-component -
ASoC Multi-Component Support") and while platforms are added and remove from
that list it is otherwise unused. This patch removes it again.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-22 23:15:57 +01:00
Dan Murphy
5df7f71d5c ASoC: tas2552: Support TI TAS2552 Amplifier
Support the TI TAS2552 Class D amplifier.

The TAS2552 is a high efficiency Class-D audio
power amplifier with advanced battery current
management and an integrated Class-G boost
The device constantly measures the
current and voltage across the load and provides a
digital stream of this information.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-17 17:57:05 +01:00
Benoit Cousson
93e6958a36 ASoC: pcm: Add soc_dai_hw_params helper
Add a function helper to factorize the hw_params code.

Suggested by Lars-Peter Clausen <lars@metafoo.de>

Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-16 23:06:27 +01:00
Benoit Cousson
88bd870f02 ASoC: core: Add initial support for DAI multicodec
DAI link assumes a one to one mapping between CPU DAI and CODEC. In
some cases, the same CPU DAI can be connected to several codecs.
This is the case for example, if you connect two mono codecs to the
same I2S link in order to have a stereo card.
The current ASoC implementation does not allow such setup.

Add support for DAI links composed of a single CPU DAI and multiple
CODECs. Sound cards have to pass the CODECs array in the corresponding
DAI link through a new 'snd_soc_dai_link_component' struct. Each CODEC in
this array is described in the same manner single CODEC DAIs are
(either DT/OF node or codec_name).

Multi-codec links are not supported in the case of CODEC to CODEC links.
Just print a warning if it happens.

Based on an original code done by Misael.

Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-16 22:58:49 +01:00
Omair Mohammed Abdullah
7523a27168 ASoC: core: add a helper for extended byte controls using TLV
ALSA supports arbitrary length TLVs for each kcontrol that can be used
to pass metadata about the control (e.g. volumes, enum information). The
same transport mechanism is now used for arbitrary length data by
defining a new helper.

Signed-off-by: Omair Mohammed Abdullah <omair.m.abdullah@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-16 22:43:59 +01:00
Takashi Iwai
0cea76f339 ALSA: control: Define SNDRV_CTL_TLV_OP_* constants
Instead of hard-coded magic numbers, define constants for op_flag to
tlv callbacks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-15 16:31:01 +02:00
Mark Brown
0ac8a52d45 ALSA: Provide a CLOCK_MONOTONIC_RAW timestamp type
For applications which need to synchronise with external timebases such
as broadcast TV applications the kernel monotonic time is not optimal as
it includes adjustments from NTP and so may still include discontinuities
due to that. A raw monotonic time which does not include any adjustments
is available in the kernel from getrawmonotonic() so provide userspace with
a new timestamp type SNDRV_PCM_TSTAMP_TYPE_MONOTONIC_RAW which provides
timestamps based on this as an option.

[dropped tstamp_type assignment code, as it's no longer needed -- tiwai]

Reported-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-10 16:58:13 +02:00
Richard Fitzgerald
1e4c0d7c9a ASoC: add SOC_VALUE_ENUM_EXT
Adds an equivalent of SOC_ENUM_EXT for value enums

Strictly speaking SOC_ENUM_EXT can also be used to define
a value enum since the only difference is the get and set
functions. But this doesn't look good in code because it is
inconsistent with the normal control definitions. Adding a
specific SOC_VALUE_ENUM_EXT is better for code clarity.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-07 16:36:38 +02:00
Bard Liao
07cf7cbadb ASoC: add RT286 CODEC driver
This patch adds Realtek ALC286 codec driver.

ALC286 is a dual mode codec, which can run as HD-A or I2S mode.
It is controlled by HD-A verb commands via I2C protocol.
The following is the I/O difference between ALC286 and general I2S codecs.
1. A HD-A verb command contains three parts, NID, VID, and PID.
   And an I2S command contains only two parts: address and data.
2. Not only the register address is written, but the read command also
   includes the entire write command.
3. rt286 uses different registers for read and write the same bits.

We map verb command to regmap structure. However, we read most registers from
cache to prevent the asymmetry read/write issue in rt286.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04 18:50:51 +01:00
Bard Liao
5e8351de74 ASoC: add RT5670 CODEC driver
This patch adds a minimum support of Realtek ALC5670 codec.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-02 20:49:25 +01:00
Kuninori Morimoto
d9288d0ba1 ASoC: rsnd: SSI + DMA can select BUSIF
Sound data needs to be sent to R-Car sound SSI when playback.
But, there are 2 interfaces for it.
1st is SSITDR/SSIRDR which are mapped on SSI.
2nd is SSIn_BUSIF which are mapped on SSIU.

2nd SSIn_BUSIF is used when DMA transfer,
and it is always used if sound data came from via SRC.
But, we can use it when SSI+DMA case too.
(Current driver is assuming 1st SSITDR/SSIRDR for it)

2nd SSIn_BUSIF can be used as FIFO.
This is very helpful/useful for SSI+DMA.

But DMA address / DMA ID are not same between 1st/2nd cases.
This patch care about these settings.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28 14:41:19 +01:00
Lars-Peter Clausen
88a8fe3df6 ASoC: dapm: Remove platform field from widget and dapm context struct
The platform field in the snd_soc_dapm_widget and snd_soc_dapm_context structs
is now unused can be removed. New code that wants to get the platform for a
widget or dapm context should use snd_soc_dapm_to_platform(w->dapm) or
snd_soc_dapm_to_platform(dapm).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 21:36:09 +01:00
Lars-Peter Clausen
9420d97b3f ASoC: dapm: Remove DAI DAPM context
The DAI DAPM context was added in commit be09ad90 ("ASoC: core: Add platform DAI
widget mapping") and the only user was removed again in commit ae10e7e8f ("ASoC:
core: Only add platform DAI widgets once."). Now that we have a per component
DAPM context it is unlikely that we'll need the DAI DAPM context again.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 21:36:08 +01:00
Lars-Peter Clausen
14e8bdebfb ASoC: Add component level stream_event() and seq_notifier() support
This patch adds stream_event() and seq_notifier() callbacks similar to those
found in the snd_soc_codec_driver and snd_soc_platform driver struct to the
snd_soc_component_driver struct. This is meant to unify the handling of these
callbacks across different types of components and will eventually allow their
removal from the CODEC and platfrom driver structs.

The new callbacks are slightly different from the old ones in that they take a
snd_soc_component as a parameter rather than a snd_soc_dapm_context. This was
done since otherwise casting from the DAPM context to the component would
typically be the first thing to do in the callback. And the interface becomes
slightly cleaner by passing a snd_soc_component to all callbacks in the
snd_soc_component_driver struct.

The patch also already removes the stream_event() callback from the
snd_soc_codec_driver and snd_soc_platform_driver structs as it is currently
unused.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 21:34:15 +01:00
Lars-Peter Clausen
bc9af9fa9b ASoC: Use component DAPM context for platforms
The snd_soc_platform dapm field is not accessed outside of the ASoC core. Switch
it over to using the snd_soc_component DAPM context.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 21:34:15 +01:00
Lars-Peter Clausen
ce0fc93ae5 ASoC: Add DAPM support at the component level
This patch adds full DAPM support at the component level. Previously there was
only full DAPM support for CODECs and partial DAPM support (e.g. no Mixers nor
MUXs) for platforms. Having DAPM support at the component level will allow all
types of components to use DAPM and also help in consolidating the DAPM support
between CODECs and platforms.

Since the DAPM context is directly embedded into the snd_soc_codec and
snd_soc_platform struct and the 'dapm' field is directly referenced in a lot of
drivers moving the field just right now is not possible without causing code
churn. The approach this patch takes is to add two new fields to the component
struct. One field which is the pointer to the actual DAPM context used by the
component and one DAPM context that will be used as the default if no other
context was specified. For CODECs and platforms the pointer is initialized to
point to the CODEC or platform DAPM context. All generic code when referencing
a component's DAPM struct will go via the pointer. This will make it possible to
eventually seamlessly move the DAPM context from snd_soc_codec and
snd_soc_platform struct over once all direct references have been eliminated.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 21:34:15 +01:00
Lars-Peter Clausen
68f831c272 ASoC: Add a set_bias_level() callback to the DAPM context struct
Currently the DAPM code directly looks at the CODEC driver struct to get a
handle to the set_bias_level() callback. This patch adds a new set_bias_level()
callback to the DAPM context struct. The DAPM code will use this new callback
instead of the CODEC callback. For CODECs the new callback is set up to call the
CODEC specific set_bias_level callback(). Not looking directly at the CODEC
driver struct will allow non CODEC DAPM contexts to implement a set_bias_level()
callback.

This is also similar to how the seq_notifier() and stream_event() callbacks are
currently handled.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 21:34:15 +01:00
Lars-Peter Clausen
7df3788410 ASoC: Auto disconnect pins from all DAPM contexts
Currently only pins in CODEC DAPM contexts are automatically marked as
non-connected if the card has the fully_routed flag set. This makes sense since
widgets which qualify for auto-disconnection are only found in CODEC DAPM
contexts. But with componentisation this is going to change, so consider all
widgets for auto-disconnection.

Also it is probably faster to walk the widgets list only once rather than once
for each CODEC.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 21:06:56 +01:00
Lars-Peter Clausen
f4333203ec ASoC: Move name and id from CODEC/platform to component
The component struct already has a name and id field which are initialized to
the same values as the same fields in the CODEC and platform structs. So remove
them from the CODEC and platform structs and used the ones from the component
struct instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 21:04:24 +01:00
Lars-Peter Clausen
94f99c875c ASoC: Move name_prefix from CODEC to component
Move the name_prefix from the CODEC struct to the component struct. This will
eventually allow to specify prefixes for all types of components. It is also
necessary to make the DAPM code component type independent (i.e. a DAPM context
does not need to know whether it belongs to a CODEC or a platform or something
else).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 21:03:22 +01:00
Lars-Peter Clausen
07f4d9d74a ALSA: control: Protect user controls against concurrent access
The user-control put and get handlers as well as the tlv do not protect against
concurrent access from multiple threads. Since the state of the control is not
updated atomically it is possible that either two write operations or a write
and a read operation race against each other. Both can lead to arbitrary memory
disclosure. This patch introduces a new lock that protects user-controls from
concurrent access. Since applications typically access controls sequentially
than in parallel a single lock per card should be fine.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:12:33 +02:00
Thomas Gleixner
26204e048d ALSA: core: Use ktime_get_ts()
do_posix_clock_monotonic_gettime() is a leftover from the initial
posix timer implementation which maps to ktime_get_ts().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-12 12:58:16 +02:00
Takashi Iwai
8743dcd663 ASoC: Final updates for v3.16
A few more updates from the last week of development, nothing too
 exciting.  Highlights include:
 
 - GPIO descriptor support for jacks
 - More updates and fixes to the Freescale SSI, Intel and rsnd drivers.
 - New drivers for Analog Devices ADAU1361, ADAU1381, ADAU1761 and
   ADAU1781, and Realtek RT5677.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTjZkHAAoJELSic+t+oim9pl0P/RTeNipwuUbFUWSYMcARc2wE
 Zpw+imtqjgE91ix5QR4OcQtL6+JtoOF7wfXA8dUmXRLrBqgSGDT/OJh771Jq4J7X
 LNTd7And4INeELeV7yajsDnHKD8P0V5Dmn+94HrjBgDuseELFn1izdGjM+0GpfKo
 i/C+595PtLSx3ekdYmsrXWyxgkUOrArhimiYKQzOtjncsGfXJCyhzvusXZQb3tCl
 Fa/HMTgMH8DlRInruN87s5CFr3O4seDB7LYOmjUIsPj4lorEFbqaGOUtPOCDJN1h
 tqMVuSIfbAEHX/ny9chsEYtMzOMPWk8s9TWn3LNfHkG8embkzaCaJqg8b8WIk/0U
 scqcKptarASYAGpSMu8IoSruC4+7GKtpo8zpGGJBclAMgmpXBSa381QnsiUGGocq
 BoBIjNSXzft3eRB0wjhGPLmJ5qMdHSEKuaDaACf2cot63ePF764cdg9EBItJLWEt
 G8nHQErUm4UfJapLvrDC+ItSNMLeaSJvCXrM1DPdfObqryKzJDbST/4B7m+w1ZGe
 2Cnc536hkYdZ6kFdDgtIyK5yTeAgoxHzYNMndejt4bjkK7bnCIxa49tZV9d8LsTG
 g03cCEkkE4nCHWsSL891YBKfLLujTZoIY+f5M396FhLHBXL5krCtPRWE42I/xo58
 wXH46Sd7HqDXxom5jpP+
 =iPCP
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Final updates for v3.16

A few more updates from the last week of development, nothing too
exciting.  Highlights include:

- GPIO descriptor support for jacks
- More updates and fixes to the Freescale SSI, Intel and rsnd drivers.
- New drivers for Analog Devices ADAU1361, ADAU1381, ADAU1761 and
  ADAU1781, and Realtek RT5677.
2014-06-03 11:51:14 +02:00
Mark Brown
770b65c3da Merge remote-tracking branches 'asoc/topic/rl6231' and 'asoc/topic/rt5677' into asoc-next 2014-06-03 10:39:55 +01:00
Mark Brown
440a528558 Merge remote-tracking branches 'asoc/topic/omap' and 'asoc/topic/rcar' into asoc-next 2014-06-03 10:39:53 +01:00
Mark Brown
9713d5d0c4 Merge remote-tracking branches 'asoc/topic/gpio' and 'asoc/topic/intel' into asoc-next 2014-06-03 10:39:50 +01:00
Mark Brown
b8139d0afd Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2014-06-03 10:39:43 +01:00
Oder Chiou
0e826e8672 ASoC: add RT5677 CODEC driver
This patch adds the Realtek ALC5677 codec driver.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01 20:18:21 +01:00
Mark Brown
15f78ea67f Merge branches 'topic/rt5640', 'topic/rt5645' and 'topic/rt5651' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rl6231 2014-06-01 20:04:24 +01:00
Lars-Peter Clausen
24089e04cb ASoC: Add helper functions to cast from DAPM context to CODEC/platform
This is useful if we have a pointer to a DAPM context and know that it is a
CODEC or platform DAPM context and want to get a pointer to the CODEC or
platform.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-01 19:16:47 +01:00
Jarkko Nikula
e667487b67 ASoC: jack: Fix multiple definition of `snd_soc_jack_add_gpiods'
Commit f025d3b9c6 ("ASoC: jack: Add support for GPIO descriptor defined
jack pins") caused build error when CONFIG_GPIOLIB is not set:

sound/include/sound/soc.h:470: multiple definition of `snd_soc_jack_add_gpiods'
sound/soc/soc-core.o:sound/include/sound/soc.h:470: first defined here
make[2]: *** [sound/soc/snd-soc-core.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [sound/soc] Error 2
make: *** [sound] Error 2

Fix this by marking snd_soc_jack_add_gpiods() as static inline in soc.h.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27 12:05:30 +01:00
Jarkko Nikula
83ad152d03 ASoC: jack: Clarify GPIO descriptor lookup in struct snd_soc_jack_gpio doc
Clarify struct snd_soc_jack_gpio documentation for the idx and name fields.
Because name is passed as connection ID to gpiod_get_index() when using GPIO
descriptor defined jack pins it is not only used as a label in debugfs but
also as function name lookup in systems that support functions names for
GPIOs.

Clarify also idx since the index is within the function of the GPIO consumer
device and not within the device itself only.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27 12:03:44 +01:00
Jyri Sarha
87c1936426 ASoC: omap-pcm: Move omap-pcm under include/sound
Make including the omap-pcm.h outside sound/soc/omap more convenient.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26 15:32:32 +01:00
Jarkko Nikula
f025d3b9c6 ASoC: jack: Add support for GPIO descriptor defined jack pins
Allow jack GPIO pins be defined also using GPIO descriptor-based interface
in addition to legacy GPIO numbers. This is done by adding two new fields to
struct snd_soc_jack_gpio: idx and gpiod_dev.

Legacy GPIO numbers are used only when GPIO consumer device gpiod_dev is
NULL and otherwise idx is the descriptor index within the GPIO consumer
device.

New function snd_soc_jack_add_gpiods() is added for typical cases where all
GPIO descriptor jack pins belong to same GPIO consumer device. For other
cases the caller must set the gpiod_dev in struct snd_soc_jack_gpio before
calling snd_soc_jack_add_gpios().

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26 15:26:00 +01:00
Jarkko Nikula
50dfb69d1b ASoC: jack: Basic GPIO descriptor conversion
This patch does basic GPIO descriptor conversion to soc-jack. Even the GPIOs
are still passed and requested using legacy GPIO numbers the driver
internals are converted to use GPIO descriptor API.

Motivation for this is to prepare soc-jack so that it will allow registering
jack GPIO pins using both GPIO descriptors and legacy GPIO numbers.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26 15:23:14 +01:00
Takashi Iwai
038b8455db ALSA: Remove deprecated snd_card_create()
Now all calls have been fixed, let's get rid of the old definition.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-23 09:57:55 +02:00
Takashi Iwai
0c1d121016 ASoC: Updates for v3.16
Lots of cleanup work going on in the core this release but very little
 visible to external users except for the new drivers that have been
 added.
 
  - Support for specifying aux CODECs in DT.
  - Removal of the deprecated mux and enum macros.
  - More moves towards full componentisation.
  - Removal of some unused I/O code.
  - Lots of cleanups, fixes and enhancements to the davinci, Freescale,
    Haswell and Realtek drivers.
  - Several drivers exposed directly in Kconfig for use with simple-card.
  - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and
    ST STA350.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTfhiIAAoJELSic+t+oim9jy0P/jcbZQkwBD23UWDbtUph5hRr
 O7tQ832exPbpFAKsxybFSt67H2yUb4iaGFy9hwM8GSKWzay23FAO7bw7Hxtd9tUC
 F7xPc7iqbk///aGpviHQAFV9wCtUB0jxz/fyUNPYFi9ZvhyYXzxa0xi7OfhCwuY/
 mb2LoaZ0EcpESyxwMQbVQhh22ZUXlf7BXEZuybSWFyH4DiyX/F6atSRWzki3mEMR
 1x7GnDr0jsCxQHJMfLYzSzYQXlj7F99iXqXCNUmV+sVuJdMHV8rFdsKt4x0YnfEp
 kQH1XE6pwyxgL6fGdN1FbJTE2pDqfsUh5IiJ5fIWVfKwY0dtJzn9CMsCVr7XLIsc
 RDa/ATzeeXWc/KQEVraHJd6BEr/1XfDRGoJIUA9qSsEg+xhHOmG0OiaHjr+/ci8R
 KcmIj3ETWh61V48sJeG3U1EArUqUyupufmYZdrzPGmhgFjxmgyKQB/8E1k5IPJCh
 TlFko05Xy+A1XTv54nrhJyM+zsFtbrmhkdFqUOSZINHzRAWv6/Y/55Q6HfVuuyPO
 7p0hBapp4EqyKT4gch7qd2yLGyVn/SYG9lusp1I8wcPWOX7g5iHJzs3VLc/4gLZs
 FJKsLxeUy7AWVWLVBMnJqgf1WBMQs+lkeOwB4MwZsJ0slYMezkI/EO8AxyMULr2w
 ilpbOkn3TZvqmAaRTPxG
 =OKes
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.16

Lots of cleanup work going on in the core this release but very little
visible to external users except for the new drivers that have been
added.

 - Support for specifying aux CODECs in DT.
 - Removal of the deprecated mux and enum macros.
 - More moves towards full componentisation.
 - Removal of some unused I/O code.
 - Lots of cleanups, fixes and enhancements to the davinci, Freescale,
   Haswell and Realtek drivers.
 - Several drivers exposed directly in Kconfig for use with simple-card.
 - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and
   ST STA350.
2014-05-22 17:50:00 +02:00
Mark Brown
04f87446c2 Merge remote-tracking branches 'asoc/topic/rt5651', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/sh', 'asoc/topic/simple', 'asoc/topic/sirf', 'asoc/topic/sta350' and 'asoc/topic/tlv320dac33' into asoc-next 2014-05-22 00:24:00 +01:00
Mark Brown
6f821c6449 Merge remote-tracking branches 'asoc/topic/nuc900', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/rt5640' and 'asoc/topic/rt5645' into asoc-next 2014-05-22 00:23:57 +01:00
Mark Brown
0c5dacf2ca Merge remote-tracking branches 'asoc/topic/cs42l56', 'asoc/topic/cs42xx8' and 'asoc/topic/davinci' into asoc-next 2014-05-22 00:23:49 +01:00
Mark Brown
e3ac3f2510 Merge remote-tracking branch 'asoc/topic/enum' into asoc-next 2014-05-22 00:23:44 +01:00
Mark Brown
566d4eeff8 Merge remote-tracking branch 'asoc/topic/dt' into asoc-next 2014-05-22 00:23:43 +01:00
Mark Brown
6bf88ab2ec Merge remote-tracking branch 'asoc/topic/dapm' into asoc-next 2014-05-22 00:23:42 +01:00
Kuninori Morimoto
bff58ea4f4 ASoC: rsnd: add DVC support
This patch adds DVC (Digital Volume Controller)
support which is member of CMD unit.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-13 19:06:16 +01:00
Lars-Peter Clausen
797f283b61 ASoC: Remove runtime field from DAI
This was initially removed in commit 6423c1875 ("ASoC: Remove runtime field from
DAI"), but was, presumably by accident, brought back in commit f0fba2ad1 ("ASoC:
multi-component - ASoC Multi-Component Support"). But has never been
initialized to anything but NULL ever since. This commit removes it again.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12 22:08:36 +01:00
Lars-Peter Clausen
94986198f5 ASoC: dapm: Handle SND_SOC_DAPM_REG() generically
Commit commit de9ba98b6d ("ASoC: dapm: Make widget power register settings more
flexible") added generic support for on_val/off_val in the DAPM core. With this
in place there is no need anymore for having a special event callback for
SND_SOC_DAPM_REG() widgets.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12 21:48:08 +01:00
Kuninori Morimoto
29e69fd2cd ASoC: rsnd: remove compatibility code
Now, all platform is using new style rsnd_dai_platform_info.
Keeping compatibility is no longer needed.
We can cleanup code.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08 12:17:59 +01:00
Lars-Peter Clausen
db88a8e3ca ASoC: Remove unused num_dai field from CODEC
Commit d191bd8de8 ("ASoC: snd_soc_codec includes snd_soc_component") removed the
last user of the num_dai field. Also remove the field itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-07 10:21:26 +01:00
Lars-Peter Clausen
af0881ffbd ASoC: Remove unused 'list' field form card
The global card list was removed in commit b19e6e7b7 ("ASoC: core: Use driver
core probe deferral"). The 'list' field of the snd_soc_card struct has been
unused since then. This patch removes the field.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-07 10:21:25 +01:00
Lars-Peter Clausen
24faf76568 ASoC: Remove card's DAI list
Commit f0fba2ad1 ("ASoC: multi-component - ASoC Multi-Component Support") added
a per card list that keeps track of all the DAIs that have been registered with
the card, but the list has never been used. This patch removes it again.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-07 10:21:25 +01:00
Mark Brown
387f837b3d Merge branch 'topic/component' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-core 2014-05-07 10:21:22 +01:00
Brian Austin
272b5edd3b ASoC: Add support for CS42L56 CODEC
This patch adds support for the Cirrus Logic Low Power Stereo I2C CODEC

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-05 18:20:22 -07:00
Daniel Mack
7c2fcccc32 ASoC: sta350: add support for bits in miscellaneous registers
Add support for RPDNEN, NSHHPEN, BRIDGOFF, CPWMEN and PNDLSL, and add DT
bindings to access them.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-05 12:52:59 -07:00
Oder Chiou
1319b2f6a5 ASoC: rt5645: Add codec driver
This patch adds the Realtek ALC5645 codec driver. It is the base
version that because the jack detect function is not implemented to
it, the headphone and AMIC1 are not workable. We will fill up the
further functions later.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-03 10:36:10 -07:00
Vinod Koul
d98812082c ASoC: add SND_SOC_BYTES_EXT
we need _EXT version for SND_SOC_BYTES so that DSPs can use this to pass data
for DSP modules

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-02 13:44:24 -07:00
Mark Brown
f29b542183 Merge branch 'asoc-dt' into asoc-omap 2014-05-01 10:57:03 -07:00
Sebastian Reichel
3ca041ed04 ASoC: dt: Allow Aux Codecs to be specified using DT
This patch adds support for specifying auxiliary codecs and
codec configuration via device tree phandles.

This change adds new fields to snd_soc_aux_dev and snd_soc_codec_conf
and adds support for the changes to SoC core methods.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-01 10:56:45 -07:00
Jyri Sarha
389cb8348c ASoC: core: Update snd_soc_of_parse_daifmt() interface
Adds struct device_node **bitclkmaster and struct device_node **framemaster
function parameters. With the new syntax bitclock-master and frame-master
properties can explicitly indicate the dai-link bit-clock and frame masters
with a phandle. This patch also makes the minimal changes to simple-card
for it to work with the updated snd_soc_of_parse_daifmt(). Simple-card appears
to be the only user of snd_soc_of_parse_daifmt() for now.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23 13:14:27 +01:00
Lars-Peter Clausen
907fe36a2c ASoC: Move standard kcontrol helpers to the component level
After moving the IO layer inside ASoC to the component level we can now easily
move the standard control helpers also to the component level. This allows to
reuse the same standard helper control implementations for other components.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22 13:38:21 +01:00
Lars-Peter Clausen
e2c330b9b5 ASoC: Move IO abstraction to the component level
We currently have two very similar IO abstractions in ASoC, one for CODECs, the
other for platforms. Moving this to the component level will allow us to unify
those two. It will also enable us to move the standard kcontrol helpers as well
as DAPM support to the component level.

The new component level abstraction layer is primarily build around regmap.
There is a per component pointer for the regmap instance for the underlying
device. There are four new function snd_soc_component_read(),
snd_soc_component_write(), snd_soc_component_update_bits() and
snd_soc_component_update_bits_async(). They have the same signature as their
regmap counter-part and will internally forward the call one-to-one to regmap.
If the component it not using regmap it will fallback to using the custom IO
callbacks. This is done to be able to support drivers that haven't been
converted to regmap yet, but it is expected that this will eventually be removed
in the future once all component drivers have been converted to regmap.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22 13:23:35 +01:00
Mark Brown
2b17ef4071 Merge branches 'topic/sta350', 'topic/core', 'topic/dapm' and 'topic/cache' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-component 2014-04-22 13:22:52 +01:00
Lars-Peter Clausen
ab2874a8fa ASoC: Change return type of snd_soc_write() to int
The CODEC's write callback can return a negative error code, make sure to pass
that on correctly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-21 11:21:25 +01:00
Bard Liao
40bc18a2a2 ASoC: add RT5651 CODEC driver
This patch adds the Realtek ALC5651 codec driver.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-18 18:52:18 +01:00
Peter Ujfalusi
8931bf6208 ASoC: Add resource managed snd_soc_register_platform()
Simplify error handling and remove repetitive (and rarely executed) code
for unregistration by providing a devm_snd_soc_register_platform()
platform.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-18 17:59:59 +01:00
Alexander Stein
5c7ab15749 ALSA: sound/atmel-ac97c.h: Remove unused flags from platform data
This platform data member is unused, so remove it.

Signed-off-by: Alexander Stein <alexanders83@web.de>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-16 10:22:03 +02:00
Lars-Peter Clausen
66097ca788 ASoC: Fix snd_soc_kcontrol_platform() return type
This should obviously be snd_soc_platform * and not snd_soc_codec *

Fixes: f6272ff8a5 ("ASoC: Add snd_soc_kcontrol_platform() helper function")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-15 23:53:10 +01:00
Lars-Peter Clausen
785b3c4e09 ASoC: Remove deprecated ENUM/MUX macros
Since there are no users left, we can remove the deprecated ENUM and MUX macros
which are just alias for other macros.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 20:40:06 +01:00
Mark Brown
aa0258adf6 Merge branch 'topic/component' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-core
Conflicts:
	sound/soc/soc-core.c
2014-04-14 17:42:28 +01:00
Sven Brandau
2439ea1f0f ASoC: sta350: Add codec driver
The TI STA350 is an integrated 2.1-channel power amplifier that is
controllable over I2C. This patch adds an ASoC driver for it.

At a glance, this chip is very similar to the STA320 for which a driver
already exists. In details, however, the register maps contain subtle
differences which made a whole new driver easier to write and maintain.

[daniel@zonque.org: cleanups, DT property rework, rebased on asoc-next]
Signed-off-by: Sven Brandau <brandau@gmx.de>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:28:43 +01:00
Oder Chiou
71d97a7943 ASoC: rt5640: Use the platform data for DMIC settings
The patch uses the platform data for DMIC settings.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:27:41 +01:00
Bard Liao
1a39019e93 ASoC: core: Allow snd_soc_update_bits use 32 bits register
Change reg's type from unsigned short to unsigned int. So that we can use
32 bits reg value in snd_soc_update_bits.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:23:39 +01:00
Lars-Peter Clausen
b37f1d123c ASoC: Let snd_soc_platform subclass snd_soc_component
There is an increasing amount of code that is very similar between platforms,
CODECS and other components. Making platforms a component will allow us to
share this code. For now the patch just adds component and component_driver
fields to the platform and platform_driver structs and registers the platform as
a component. Followup patches will be used to consolidate code between the
different types of components.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:22:44 +01:00
Lars-Peter Clausen
98e639fb8a ASoC: Track which components have been registered with snd_soc_register_component()
snd_soc_unregister_component() takes the parent device of the component as a
parameter and then looks up the component based on this. This is a problem if
multiple components are registered for the same parent device. Currently drivers
do not do this, but some drivers register a CPU DAI component and a platform for
the same parent device. This will become a problem once platforms are also made
components. To make sure that snd_soc_unregister_component() will not
accidentally unregister the platform in such a case only consider components
that were registered with snd_soc_register_component(). This is only meant as
short term stopgap solution to be able to continue componentisation. Long term
we'll need something different.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:22:43 +01:00
Lars-Peter Clausen
20a0ec27ea ASoC: Remove IO register modifier callbacks
There are no ASoC drivers left that use them and new drivers are supposed to use
regmap for this.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:22:43 +01:00
Lars-Peter Clausen
f6272ff8a5 ASoC: Add snd_soc_kcontrol_platform() helper function
For platform controls snd_kcontrol_chip() currently returns a pointer to the
platform that registered the control. With the upcoming consolidation of
platform and CODEC controls this will change. Prepare for this by introducing
the snd_soc_kcontrol_platform() helper function that will hide the
implementation details of how the platform for a control can be obtained. This
will allow us to change this easily in the future.

The patch also updates all platforms to use this new helper function.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:22:43 +01:00
Lars-Peter Clausen
ea53bf77d1 ASoC: Add snd_soc_kcontrol_codec() helper function
For CODEC controls snd_kcontrol_chip() currently returns a pointer to the
CODEC that registered the control. With the upcoming consolidation of
platform and CODEC controls this will change. Prepare for this by introducing
the snd_soc_kcontrol_codec() helper function that will hide the implementation
details of how the CODEC for a control can be obtained. This will allow us to
change this easily in the future.

The patch also updates all CODEC drivers to use the new helper function.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:22:43 +01:00
Xiubo Li
a39f75f790 ASoC: core: Move the default regmap I/O setting to snd_soc_register_codec()
Add the default regmap I/O setting to snd_soc_register_codec() while
the CODEC is initialising, which will be called by CODEC driver device
probe(), and then we can make XXX_set_cache_io() go away entirely from each
CODEC ASoC probe.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:22:18 +01:00
Ondrej Zary
9229bc1500 ALSA: cs8427: separate HW initialization
Separate HW initialization from device creation.
This is needed for suspend/resume support.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-03 14:59:48 +02:00
Takashi Iwai
69dd89fd2b ASoC: Final updates for v3.15 merge window
A few more updates from last week - use of the tdm_slot mapping from
 Xiubo plus a few smaller fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTOTo2AAoJELSic+t+oim9uGoP/js3MEs3IbvwLECnkUaEoyzs
 f80BAPlSoU/TmoBeYN8ICSZZ9a8PYOHTAQeZ5x1Wc7hCPHFzeaSjrM/KwgZJlgbg
 dQkVHDVmooNFjXiJvaqmQb/3megOIaPzPffBdSJlfE4dDhJxjlMBQtibhsoNHUzS
 33yWWxmdo1QKqD/BU0M/e0MQKvjPM9gKO9sdLaSV5fWxHug2MzqBSR4nqv0iJwX/
 i38bkj46N40VyoOwZphUiEEtXt9cldRDqAbGTi52K8tDmJYRKZpiD8LcSBLHwwAo
 VMVJCtLEZkE2B++v95s1/MoJXsc14zh5/ydYH9O8GFE5Dtu03qHxSdhTBPGFh6lb
 TUgExe+TachgQdEvEFF1/CqqxgdO7y3Q4/ns8ARAFqBzADdGaBUGVXz7TzhVrb9e
 mIf0r3IJFizK0wIjwO2hwnhygLObCBsRYNDCDTbr55zuJMN4YzQeSaTix5DINruq
 sWSSK1WfiQL49KmBJrjHqezzTYT2+Lqod82Ik5lytJl0uKFuPP8lHo5fG3C/18Kg
 OdiSBoi8SotfsOoOLJohHMg0OXhyoAm4NHs8Ts/oPUrz32u+d8mrWos5zInLMdY2
 wqqHoLMyA+ycYruW8B87BryOHf2fy7L0icDBQ+nU1YU02BhIi+CXR9tH6G6N9G+n
 G1c06a5hGSp08b3V79Zu
 =2++i
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Final updates for v3.15 merge window

A few more updates from last week - use of the tdm_slot mapping from
Xiubo plus a few smaller fixes and cleanups.
2014-03-31 12:33:09 +02:00
Xiubo Li
e5c2151483 ASoC: core: remove the 'of_' prefix of of_xlate_tdm_slot_mask.
The 'of_' is not appropriate here for there hasn't any DT parsing.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-25 13:06:43 +00:00
Takashi Iwai
89c8ae7345 ASoC: Updates for v3.15
A few more updates for the merge window:
 
  - Fixes for the simple-card DAI format DT mess.
  - A new driver for Cirrus cs42xx8 devices.
  - DT support for a couple more devices.
  - A revert of a previous buggy fix for soc-pcm, plus a few more fixes
    and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTLxIrAAoJELSic+t+oim9jcYQAJ1SGB0kG8yHvvuY1L6hxfWS
 VyeP63VYaETBUKQZFgLfwwmzCmHKFiK6wW5nclOoKP6akzDe1cVmeePj2vi6P+Et
 TzaTrJZDnHPwTHfkjznMCqBXlmnyJI05aP7zeClnBjBVV07VekRn1C4n82qCfDAH
 PnOsG7fPC4zvX55OAkwXf2yShsVJ4zL7X8rfmgH7EaJoOLTBwfqjey0VyoO9CPHk
 yRRYpgBUJGLErA14c4Ve+ErfqnAPju3KKGHpAezxbTKxa1Z2Ri47yxUx7TnFLVKz
 m1f02dbnkwnD5MI0vJ1SibFiswWMa+tdtLE7i0QOxIRGKdWgtGdYlPxo6bXjrUAR
 M9WHR755idWhoHiBoYBuKFHScBfG62pHsfSfySwlS35DGes4k7C6WWWAjxPRiG5M
 7sTrqGyH4TSFVFvGYZFq68eVvFBzWeJ4H0KGEsvg49AK9/wscURrCkh241PN50kw
 mKbG1ZldwcBpeNcOARnGBxm7tuciQzyyOZPa7h7Ydkb/VpX7p5XsNQLxlZMcU2PH
 M4cqs64f3/4+1zjXZ9p14Jqv97e+SPCHI3udM9Nenh5MDeOilvemlhUTIjC1Cnzr
 76EH0d8mmQ+As+kLjRuz4rozipl9UcFMrx/mpaoK/mnnc5a1M243HCO/6LAvhlyG
 RpbuRr6RuKVQ2iLh5tpB
 =wKyT
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.15

A few more updates for the merge window:

 - Fixes for the simple-card DAI format DT mess.
 - A new driver for Cirrus cs42xx8 devices.
 - DT support for a couple more devices.
 - A revert of a previous buggy fix for soc-pcm, plus a few more fixes
   and cleanups.
2014-03-24 09:24:39 +01:00
Mark Brown
9780b68435 Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2014-03-23 14:00:43 +00:00
Lars-Peter Clausen
28d6d175d8 ASoC: Add helper function to cast component back to CODEC
Add a helper function to cast back from a component struct to the CODEC struct
it is embedded in. This is useful in situations where we know that a certain
component is a CODEC and want to get access to some CODEC specific properties.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-19 13:07:30 +00:00
Takashi Iwai
c320106230 ASoC: Updates for v3.15
This is mostly a few additional fixes from Lars-Peter, a new driver and
 cleaning up a git failure with merging the Intel branch (combined with
 an xargs failure to pay attention to error codes).  The history lists a
 bunch of additional commits for the branch but the content of those
 commits is actually present already but not recorded in history due to
 git failing.  Unfortunately xargs is used in the merge script and it
 doesn't do a good job of noticing errors from the commands it invokes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTIb/oAAoJELSic+t+oim9w5gP/AnPxNltiReYgAWgkT9KfG+y
 eAD4QbAxc66FAMRicsyArM0Y+jilgFIhh9Ved6cy70oDgUuMQHU3Ma5/W4dCYdBh
 WLLz5YaCqgaHFxLKWsp2vYG4pZik0Yp7hMCC0j391/6LQyVMSTsulHy70zAbhDGK
 NpP+Z1BfB/mwDAftECGuTAmS5lJOkZ5vSkAr20n3/Omg9P/3dJ0ZixMSyVSPLyjJ
 +1lpQ0FYGwaPmfxivXBS7y5XaBQQ8yggLMlZJcNC13Ye2zB0yaBrXC8/cVyE+S3z
 5MIpwilbRsWyam2/aOa3Q5gTsTKwvWWoikIHPFTUc0qFGVr5DVea2eipuAaElPQ3
 hB7UxjhgHUEaMmpZMZp15NYieOrixS5U/es+rrugJOMp8yxazIatSipYD+P3LYeN
 I2esMnLRWr+9FGudFvwdHlmx8UQ4CDPTp1V87kibKt6SRe9GluaGnJx+YZFzH3dq
 1VZ5lA4t5Q53wTtwwsY1A7bNQxcLKwMHDr56xQMOoRZTuiBNxd5GuVQem/Obz5tg
 x+8iniasCc24pP3z95Ilx5EpW1FFyOsqXZHugup81O7SdtGuOWcrYaFVkfURVnaQ
 g04agU1ObK8bvQR2CFkux6F96nktBix9Y9PQFZrzEhKK+4qGjBSJVJBcNCKfd+NB
 btf2vWOw5jt2XodkguiZ
 =nG53
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.15

This is mostly a few additional fixes from Lars-Peter, a new driver and
cleaning up a git failure with merging the Intel branch (combined with
an xargs failure to pay attention to error codes).  The history lists a
bunch of additional commits for the branch but the content of those
commits is actually present already but not recorded in history due to
git failing.  Unfortunately xargs is used in the merge script and it
doesn't do a good job of noticing errors from the commands it invokes.
2014-03-13 19:03:48 +01:00
Mark Brown
4c11a761b8 Merge remote-tracking branch 'asoc/topic/jack' into asoc-next 2014-03-13 14:19:32 +00:00
Mark Brown
2620954d64 Merge remote-tracking branch 'asoc/topic/io' into asoc-next 2014-03-13 14:19:21 +00:00
Takashi Iwai
5fdb83f190 ASoC: Updates for v3.15
Quite a busy release for ASoC this time, more on janitorial work than
 exciting new features but welcome nontheless:
 
  - Lots of cleanups from Takashi for enumerations; the original API for
    these was error prone so he's refactored lots of code to use more
    modern APIs which avoid issues.
  - Elimination of the ASoC level wrappers for I2C and SPI moving us
    closer to converting to regmap completely and avoiding some
    randconfig hassle.
  - Provide both manually and transparently locked DAPM APIs rather than
    a mix of the two fixing some concurrency issues.
  - Start converting CODEC drivers to use separate bus interface drivers
    rather than having them all in one file helping avoid dependency
    issues.
  - DPCM support for Intel Haswell and Bay Trail platforms.
  - Lots of work on improvements for simple-card, DaVinci and the Renesas
    rcar drivers.
  - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
    CSR SiRF SoC.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTIOhJAAoJELSic+t+oim90CoP/3CVTm9cWv1qhPSU6jjn6RJG
 /djmhntJfHd/GXo+0TiiwNK9WmZjFrJUr+5ofkDTCqSzFz1Suc90B6oHxY4dFbgF
 IyIpTexGwTLv3H6yDjadYAfmGDSsE9sM2dkID9oXy6aEzjNby/a1VEiBnRgx16X1
 YGvMVK8AGFn/AyC/zOV6EcKJxUjdDogqZ5wkR2XHzwDoYjl9ufxK9BnSIygYABOW
 ABAjyrZf3xx97AH82BB6iqcZMh5GxGNTvI3hQd/vjx0r7RFUDNLqmF2cPZAMTRW/
 bXWxVmtNHie1+lCldyMFm8pV/Pv09zuqDAQKbPY2TeHj2zF8CM548NlkFHqwHlp0
 S9K5E1N+/2wcXMjQa1wBELohUdl6dVh1OFOAz7M8o0TJdSOZyR6PJ9r0NprP8NgS
 67FBU+ZqnWIK159m9rKkFfPhnaDuDzk+rpwyK0fQxQgpdGGjLyv7OK3GhS30oTnA
 Z2GjEyUySM1BcEEWAtfUD5fHbjN28e1Icn53q5q4JK4gvx4DXBy08uY/vumvjXjO
 8oum3q3RjRvqIhzMrJoVgs+c8RHwS/bZQhlu9Q3qNTsDNDyMnaZWHFAnP8RDqHjv
 ojZiMJkJdpqceZ3z1k5ZG8GWJ2JaZBikSbeNk2Ltg17/0nackq2r8ekrIoEUPVk2
 ph4DJNC2s1qCFtx7tzQj
 =C5oo
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.15

Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:

 - Lots of cleanups from Takashi for enumerations; the original API for
   these was error prone so he's refactored lots of code to use more
   modern APIs which avoid issues.
 - Elimination of the ASoC level wrappers for I2C and SPI moving us
   closer to converting to regmap completely and avoiding some
   randconfig hassle.
 - Provide both manually and transparently locked DAPM APIs rather than
   a mix of the two fixing some concurrency issues.
 - Start converting CODEC drivers to use separate bus interface drivers
   rather than having them all in one file helping avoid dependency
   issues.
 - DPCM support for Intel Haswell and Bay Trail platforms.
 - Lots of work on improvements for simple-card, DaVinci and the Renesas
   rcar drivers.
 - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
   CSR SiRF SoC.
2014-03-13 09:53:25 +01:00
Mark Brown
7cc6417208 Merge remote-tracking branches 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/sh', 'asoc/topic/simple', 'asoc/topic/sirf', 'asoc/topic/sn95031', 'asoc/topic/ssm2602' and 'asoc/topic/stac9766' into asoc-next 2014-03-12 23:04:42 +00:00
Mark Brown
a4b12990b6 Merge remote-tracking branches 'asoc/topic/ml26124', 'asoc/topic/of', 'asoc/topic/omap', 'asoc/topic/pxa' and 'asoc/topic/rcar' into asoc-next 2014-03-12 23:04:35 +00:00
Mark Brown
b8f861586c Merge remote-tracking branch 'asoc/topic/enum' into asoc-next 2014-03-12 23:03:59 +00:00
Mark Brown
53a2c4db8c Merge remote-tracking branch 'asoc/topic/dapm' into asoc-next 2014-03-12 23:03:58 +00:00
Mark Brown
da8ab21cfe Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2014-03-12 23:03:58 +00:00
Xiubo Li
092eba937d ASoC: io: New signature for snd_soc_codec_set_cache_io()
Now that all users have been converted to regmap and the config.reg_bits
and config.val_bits can be setted by each user through regmap core API.
So these two params are redundant here.

Since the only control type that left is SND_SOC_REGMAP, so remove it. Drop
the control params and add struct regmap *regmap to simplify the code.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-11 09:59:06 +00:00
Mark Brown
db5a5ee7c7 Merge branches 'topic/ad193x', 'topic/tlv320aic23', 'topic/tlv320aic32x4', 'topic/wm8991', 'fix/si476x' and 'fix/88pm860' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-io 2014-03-11 09:58:55 +00:00
Geert Uytterhoeven
f1eaaf8fce Revert "ALSA: emu10k1: Fix warning: "CCR" redefined"
This reverts commit 83fc3bc095.

sh-specific "CCR" and "CCR2" have been prefixed by "SH_" in commit
a5f6ea29f9 ('sh: prefix sh-specific "CCR" and
"CCR2" by "SH_"').

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-11 07:54:14 +01:00
Mark Brown
492c0a18b7 ASoC: dapm: Staticise dapm_mark_dirty()
The function is not called outside soc-dapm.c so there is no need for it
to be exported.

Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10 12:34:24 +00:00
Lars-Peter Clausen
1438c2f60b ASoC: Add a per component dai list
Now that every DAI has a component we can track the DAIs on a per component
basis. This simplifies the DAI lookup when we are only interested in DAIs of a
specific component and also makes it possible to have multiple components with
the same parent device and also register DAIs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10 12:17:54 +00:00
Mark Brown
6af5263cea Merge branch 'topic/pcm' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-enum
Conflicts:
	include/sound/soc.h
2014-03-06 17:07:39 +08:00
Lars-Peter Clausen
3d59400fe4 ASoC: Move ignore_pmdown_time from CODEC to component
In preparation for componentization move the ignore_pmdown_time field from the
snd_soc_codec struct to the snd_soc_component struct. Set it to true for non
CODEC components for now.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:56 +08:00
Lars-Peter Clausen
cdde4ccb14 ASoC: Move active count from CODEC to component
There is no reason why active count tracking should only be done for CODECs but
not for other components. Moving the active count from the snd_soc_codec struct
to the snd_soc_component struct reduces the differences between CODECs and other
components and will eventually allow component to component DAI links (Which is
a prerequisite for converting CODECs to components).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Lars-Peter Clausen
6106d12947 ASoC: Add component pointer to the DAI struct
Keep track of which component registered a DAI. We'll need this as
componentization progresses.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Lars-Peter Clausen
5c898e74d1 ASoC: Add helper function to check whether a CODEC is active
Instead of directly checking the 'active' field of the CODEC struct add a new
helper function that will return either true or false depending on whether the
CODEC is active. This will make the migration to the component level easier.

The patch also updates all CODEC drivers that check the active attribute to use
the new helper function.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Lars-Peter Clausen
24894b7646 ASoC: Add helper functions for PCM runtime 'active' management
We have the same code that increments and decrements the active field of the
various PCM runtime components (all with the same bugs). Factor this out into
common helper functions.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Lars-Peter Clausen
208a1589db ASoC: Handle ignore_pmdown_time for CODEC to CODEC links
For CODEC to CODEC links we should only immediately power down if both CODECs
are configured to ignore the power down delay. Factor the logic for this
into a helper function that can be used for both compressed and normal PCMs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 17:04:55 +08:00
Kuninori Morimoto
ba9c949f79 ASoC: rsnd: rename scu to src
R-Car sound has SCU unit which has SRC/CTU/MIX/DVC,
and current rsnd driver has scu.c and scu module.
Current scu.c has SRC support only.
My first concept was control these feature on scu.c
but, it become difficult and un-understandable now.
This patch rename scu to src

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:53 +08:00
Kuninori Morimoto
389933d9f6 ASoC: rsnd: Get correct SCU ID
Current rsnd driver is assuming that SCU/SRU ID is
same as SSIU/SSI ID, because Gen1 can't select it.
But, Gen2 can select it.
The SCU/SRU/SSIU/SSI pair depends on the platform.
This patch get correct SCU ID from platform info.
To keep compatible, it still assuming SCU ID = SSI ID
if platform doesn't have info

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:52 +08:00
Kuninori Morimoto
78f13d0c5a ASoC: rsnd: add struct rsnd_dai_platform_info
R-Car sound DAI consists from SSI/SCU/SSIU/SRU...
Current R-Car sound DAI is decided from these settings,
but it is intuitively unclear, and is not good design for DT support.
This patch adds new rsnd_dai_platform_info to solve this issue.

But now, many platform is using this driver without
rsnd_dai_platform_info.
So, this patch still supports DAI settings via SSI to keep compatible.
It will be removed in next Linux version.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05 14:07:52 +08:00
Mark Brown
feff9f3c96 ASoC: io: Remove hw_read() operation
We now no longer have any users of hw_read() in the kernel so remove the
code in order to prevent any new users being added. Users should be using
regmap.

Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04 18:11:58 +08:00
Kuninori Morimoto
697dce94ed ASoC: rsnd: tidyup RSND_SSI_xxx flags
6f3ab6c1c0
(ASoC: rsnd: remove pin sync option)
added unused RSND_SSI_CLK_FROM_ADG flag.
It should remove RSND_SSI_SYNC.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03 10:21:12 +09:00
Dylan Reid
f0a220dedd ALSA: core - Define snd_pci_quirk without CONFIG_PCI
The hda codecs all use this struct and, with an HDA platform driver,
will be able to be built without PCI.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:41 +01:00
Lars-Peter Clausen
236aaa6863 ASoC: dapm: Consolidate MUXs and virtual MUXs
MUXs and virtual MUXs are almost identical, the only difference is that for
virtual MUX there is no hardware backing register in which setting is stored.
This patch adds code, which is similar to what we already do for DAPM mixer
controls to support virtual mixer controls, to DAPM enum controls. The new code
will check if the enum does a hardware backing register and skip over reading
and writing to the register if it has not.  This allows us to use the same code
path for both MUXs and virtual MUXs and a lot of nearly identical code can be
removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:36 +09:00
Lars-Peter Clausen
b948837a32 ASoC: Add macros for defining virtual enums
With the upcoming consolidation of normal MUXs and virtual MUXs we need to be
able to distinguish between enums with and without a backing register at the
enum level. Use the same approach as used for virtual mixer controls by setting
the reg field of the enum to SND_SOC_NOPM for enums without a backing register.
This patch adds a set of helper macros that can be used to define such enums.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:34 +09:00
Lars-Peter Clausen
3727b49684 ASoC: dapm: Consolidate MUXs and value MUXs
MUXs and value MUXs are almost identical, the only difference is that a value
MUX uses a look-up table to map from the selected control item to a register
value, while MUXs use a direct mapping. This patch uses
snd_soc_enum_item_to_val() and snd_soc_enum_val_to_item(), which where earlier
introduced during the consolidation of enum and value enum controls, to hide
this difference. This allows us to use the same code path for both MUXs and
value MUXs and a lot of nearly duplicated code can be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:34 +09:00
Lars-Peter Clausen
29ae2fa553 ASoC: Consolidate enum and value enum controls
The implementations for enum and value enum controls are almost identical. The
only difference is that the value enum uses an additional look-up table to map
the control value to the register value, while the enum control uses a direct
mapping. Enums and value enums can easily be distinguished at runtime, for value
enums the values field of the snd_soc_enum struct contains the look-up table,
while for enums it is NULL. This patch adds two new small helper functions
called snd_soc_enum_item_to_val() and snd_soc_enum_val_to_item() which map
between register value and control item. If the items field of the snd_soc_enum
struct is NULL the function will do a direct mapping otherwise they'll use the
look-up table to do the mapping. Using these small helper functions it is
possible to use the same kcontrol handlers for both enums and value enums. The
functions are added a inline functions in soc.h so they can also be used by the
DAPM code to accomplish similar consolidation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:33 +09:00
Lars-Peter Clausen
8303d769ea ASoC: Remove unused 'reg2' field from soc_enum struct
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01 12:03:33 +09:00
Mark Brown
a304681f36 Merge branches 'topic/dapm', 'topic/sign', 'topic/adau1373', 'topic/max98090', 'topic/mc13783', 'fix/wm8994' and 'topic/wm8995' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-enum 2014-03-01 12:03:16 +09:00
Takashi Iwai
72620d6048 ALSA: Clean up snd_device_*() codes
A few code cleanups and optimizations.  In addition, drop
snd_device_disconnect() that isn't used at all, and drop the return
values from snd_device_free*().

Another slight difference by this change is that now the device state
will become always SNDRV_DEV_REGISTERED no matter whether dev_register
ops is present or not.  It's for better consistency.  There should be
no impact for the current tree, as the state isn't checked.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:52 +01:00
Takashi Iwai
289ca025ee ALSA: Use priority list for managing device list
Basically, the device type specifies the priority of the device to be
registered / freed, too.  However, the priority value isn't well
utilized but only it's checked as a group.  This results in
inconsistent register and free order (where each of them should be in
reversed direction).

This patch simplifies the device list management code by simply
inserting a list entry at creation time in an incremental order for
the priority value.  Since we can just follow the link for register,
disconnect and free calls, we don't have to specify the group; so the
whole enum definitions are also simplified as well.

The visible change to outside is that the priorities of some object
types are revisited.  For example, now the SNDRV_DEV_LOWLEVEL object
is registered before others (control, PCM, etc) and, in return,
released after others.  Similarly, SNDRV_DEV_CODEC is in a lower
priority than SNDRV_DEV_BUS for ensuring the dependency.

Also, the unused SNDRV_DEV_TOPLEVEL, SNDRV_DEV_LOWLEVEL_PRE and
SNDRV_DEV_LOWLEVEL_NORMAL are removed as a cleanup.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:51 +01:00
Takashi Iwai
71e2e1c147 ALSA: hwdep: Allow to assign the given parent
Just like PCM, allow hwdep to be assigned to a different parent device
than the card.  It'll be used for the HD-audio codec device in the
later patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:50 +01:00
Takashi Iwai
caa751bad4 ALSA: Create sysfs attribute files via groups
Instead of calling each time device_create_file(), create the groups
of sysfs attribute files at once in a normal way.  Add a new helper
function, snd_get_device(), to return the associated device object,
so that we can handle the sysfs addition locally.

Since the sysfs file addition is done differently now,
snd_add_device_sysfs_file() helper function is removed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:49 +01:00
xiangxiao
cb29d7b9ef ASoC: add data field into snd_soc_jack_gpio
so callback could get the context data as needed

Signed-off-by: xiangxiao <xiaoxiang@xiaomi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-24 10:27:44 +09:00
Xiubo Li
6ff62eedce ASoC: simple-card: add slot information parsing supports
For some CPU/CODEC DAI devices the slot information maybe needed. This
patch adds the slot information parsing for simple-card driver.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 14:26:37 +09:00
Mark Brown
ff2878644e Merge branch 'topic/of' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-simple 2014-02-23 14:26:21 +09:00
Xiubo Li
89c6785715 ASoC: core: add TDM slot parsing from DT supports
For some CPU/CODEC DAI devices the TDM slot infomation maybe needed. This
patch adds the slot parsing from DT supports.

TDM slot properties:
    dai-tdm-slot-num : Number of slots in use.
    dai-tdm-slot-width :  Width in bits for each slot.

For instance:
    dai-tdm-slot-num = <2>;
    dai-tdm-slot-width = <8>;

And for each spcified driver, there could be one .of_xlate_tdm_slot_mask()
to specify a explicit mapping of the channels and the slots. If it's absent
the default snd_soc_of_xlate_tdm_slot_mask() will be used to generating the
tx and rx masks.

For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit
for an active slot as default, and the default active bits are at the LSB of
the masks.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 14:15:30 +09:00
Mark Brown
56b2f34913 ASoC: io: Remove SND_SOC_I2C
Now that all users have been converted to regmap we can eliminate the ASoC
level wrapper for I2C I/O reducing the amount of duplicated functionality.

Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 13:20:42 +09:00
Takashi Sakamoto
20c8cd593a ALSA: rawmidi: remove undefined functions.
'snd_rawmidi_transmit_reset()' and 'snd_rawmidi_receive_reset()' are declared
but not defined.

This state has been continue over 10 years. So let us remove them.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-21 12:06:12 +01:00
Charles Keepax
3eb29dfb3d ASoC: dapm: Add unlocked version of snd_soc_dapm_sync
We will often call sync after several functions that require the DAPM
mutex to be held. Rather than release and immediately relock the mutex
provide an unlocked function for this situation.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20 19:22:24 +09:00
Charles Keepax
f6d5e586b4 ASoC: dapm: Add helpers to lock/unlock DAPM mutex
Acquiring the DAPM mutex is necessary before using several DAPM
functions and dereference is quite ugly. This patch provides a helper
function to simplify this.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20 19:22:23 +09:00
Charles Keepax
1139110064 ASoC: dapm: Add locking to snd_soc_dapm_xxxx_pin functions
The snd_soc_dapm_xxxx_pin all require the dapm_mutex to be held when
they are called as they edit the dirty list, however very few of the
callers do so.

This patch adds unlocked versions of all the functions replacing the
existing implementations with one that holds the lock internally. We
also fix up the places where the lock was actually held on the caller
side.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2014-02-20 18:40:07 +09:00
Takashi Iwai
2e7e1993f9 ASoC: Add const to SOC_ENUM_*_DECL() macros
Since these macros are supposed to be used for decalring const
objects, let's add the const modifier there.

The doubled const appearing in usages will be cleaned by later
patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20 10:43:06 +09:00
Takashi Iwai
9a8d38db03 ASoC: Rename soc_enum.max field with items
The name "max" in struct soc_enum is rather confusing since it
actually takes the number of items.  With "max", one might try to
assign (nitems - 1) value.

Rename the field to a more appropriate one, "items", which is also
used in struct snd_ctl_elem_info, too.

This patch also rewrites some code like "if (x > e->nitems - 1)" with
"if (x >= e->nitems)".  Not only the latter improves the readability,
it also fixes a potential bug when e->items is zero.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20 10:42:53 +09:00
Mark Brown
7b80300e74 ASoC: io: Remove SPI support
All ASoC CODEC drivers that use SPI have now been converted to use regmap
so we can delete SND_SOC_SPI, preventing any new users being added.

Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-16 10:05:33 +08:00
Takashi Iwai
9ce5054363 ALSA: Drop __bitwise and typedefs for snd_device attributes
Using __bitwise and typedefs for the attributes of snd_device struct
isn't so useful, and rather it worsens the readability.  Let's drop
them and use the straightforward enum.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:20:24 +01:00
Takashi Iwai
09e56df8b3 ALSA: pcm: Use standard printk helpers
Use dev_err() & co as much as possible.  If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.

For simplicity, introduce new helpers for pcm stream, pcm_err(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:15 +01:00