drivers/media/pci/cobalt/cobalt-flash.c:101:5: warning: symbol 'cobalt_flash_probe' was not declared. Should it be static?
drivers/media/pci/cobalt/cobalt-flash.c:126:6: warning: symbol 'cobalt_flash_remove' was not declared. Should it be static?
drivers/media/pci/cobalt/cobalt-cpld.c:101:6: warning: symbol 'cobalt_cpld_status' was not declared. Should it be static?
drivers/media/pci/cobalt/cobalt-cpld.c:240:6: warning: symbol 'cobalt_cpld_set_freq' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/pci/cobalt/cobalt-flash.c:39:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:54:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:63:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:82:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:107:19: warning: incorrect type in assignment (different address spaces)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90
.rangehigh = 2208000000L,
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fixes these warnings:
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'omni_sg_dma_start':
drivers/media/pci/cobalt/cobalt-omnitek.c:112:28: warning: right shift count >= width of type [-Wshift-count-overflow]
iowrite32((u32)(desc->bus >> 32), DESCRIPTOR(s->dma_channel) + 4);
^
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_create':
drivers/media/pci/cobalt/cobalt-omnitek.c:222:28: warning: right shift count >= width of type [-Wshift-count-overflow]
d->next_h = (u32)(next >> 32);
^
drivers/media/pci/cobalt/cobalt-omnitek.c:268:32: warning: right shift count >= width of type [-Wshift-count-overflow]
d->next_h = (u32)(desc->bus >> 32);
^
drivers/media/pci/cobalt/cobalt-omnitek.c:275:27: warning: right shift count >= width of type [-Wshift-count-overflow]
d->next_h = (u32)(next >> 32);
^
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_chain':
drivers/media/pci/cobalt/cobalt-omnitek.c:293:31: warning: right shift count >= width of type [-Wshift-count-overflow]
d->next_h = (u32)(next->bus >> 32);
^
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_loopback':
drivers/media/pci/cobalt/cobalt-omnitek.c:332:30: warning: right shift count >= width of type [-Wshift-count-overflow]
d->next_h = (u32)(desc->bus >> 32);
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The interrupt bit assignments use for the adv7511 were off by one.
This means that the current scheme (bit << (4 * stream_index)) can
no longer be used.
Fix this by precalculating and storing the correct masks in the
cobalt_stream struct.
This wasn't noticed before because the adv7511 interrupts are very
rare. But for CEC support these interrupts are essential, so this made
me realize that it wasn't working correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The ucblocks register is probably a counter and not a rate; assume
it is so and change the calculations as required.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix the 0x0x prefix in integer constants.
In this case a padding 0 must also be inserted to make the constants
look like all the other 16 bits ones.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Frontend bandwidth calculation overflows on very high DVB-S/S2
symbol rates. Use mult_frac() macro in order to keep calculation
correct.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As reported by smatch:
drivers/media/tuners/e4000.c:287:32: warning: constant 2208000000 is so big it is long long
drivers/media/tuners/e4000.c:287:32: warning: decimal constant 2208000000 is between LONG_MAX and ULONG_MAX. For C99 that means long long, C90 compilers are very likely to produce unsigned long (and a warning) here
drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90
.rangehigh = 2208000000,
^
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Implement V4L2 subdevice tuner and core ops. After that this driver
is hybrid driver implementing both V4L2 and DVB ops.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Rename device state from 's' to 'dev'.
* Move single include to driver private header.
* Change error handling type of each function to one I tend use
nowadays.
* Remove dummy register write from init. Even Windows driver does this
multiple times remove it as I have never seen any I2C errors.
* Define I2C client pointer for each function and use it.
* Do not clean tuner ops during driver remove - not needed.
* Disable sysfs device bind / unbind. We are not allowed manually
bind / unbind device from the driver currently.
* Rename some other variables.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Update synthesizer calculation to model I prefer nowadays. It is
mostly just renaming some variables to ones I think are most standard.
Also add 'schematic' of synthesizer following my current understanding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This code works fine but static checkers complain. The test_bit()
function takes the bit number and not a mask. Then the other issue is
that we were using USB_STATE_URB_BUF which is BIT(0) instead of URB_BUF.
Also we were open coding that instead of using the test/clear/set_bit()
functions.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The cobalt device is a PCIe card with 4 HDMI inputs (adv7604) and a
connector that can be used to hook up an adv7511 transmitter or an
adv7842 receiver daughterboard.
This device is used within Cisco but is sadly not available outside
of Cisco. Nevertheless it is a very interesting driver that can serve
as an example of how to support HDMI hardware and how to use the popular
adv devices.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This makes it easier for the bridge driver to just passthrough such
events to the corresponding device node.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
vb2_buffer_done() already allows STATE_QUEUED, but currently only when not
streaming. It is useful to allow it while streaming as well, as this makes
it possible for drivers to requeue buffers while waiting for a stable
video signal.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Replace the dummy video format operations by pad format operations that
configure the output format.
Copied from the adv7604 driver.
Note: while arch/blackfin/mach-bf609/boards/ezkit.c uses adv7842_platform_data
this source has not been updated because it is broken since the very
beginning. It depends on a struct adv7842_output_format that does not
exist.
And besides that gcc has no support for bf609 so nobody can compile it
except by installing a toolchain from ADI.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
These state vars are used for more than just ber calculation, also
fix typo.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
BER & UCB aren't available unless we're locked; don't update dvbv5
stats when not locked and mark these counters as unavailable.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
DVBv3 is a legacy API. Drivers should use DVBv5, in order to support
modern applications. So, implement UCB using dvbv5.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of reading BER again for DVBv3 call, use the value from the cache.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
DVBv3 is a legacy API. Drivers should use DVBv5, in order to support
modern applications. So, implement BER using dvbv5.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use const on the static data, as gcc may optimize better the
code. Also, would prevent that some code would override the
data there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
As reported by smatch:
drivers/media/dvb-frontends/cx24120.c: In function 'cx24120_message_send':
drivers/media/dvb-frontends/cx24120.c:368:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret, ficus;
^
The values written by cx24120 are never checked. So, remove the
check here too. That's said, the best would be to do the reverse,
but globally: to properly handle the error codes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Add in all the likely values for setting fec on tuning. Some values
yet to be tested but very likely to be correct.
In the very unlikely event that these are wrong tuning with
FEC_AUTO will still work.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If set, all the other drivers reset no_base_addr on failure to
attach - git commit for this being added to some of them seems to
be eccd15aad7
This driver has been floating around outside the mainline for so
long it hasn't had this fix, so add it in.
Whilst here tidy surrounding code to fix style issues.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove reg1 by refactoring for loops
Change ret into an int as it's only used for return values now,
and remove reset_result by using ret instead.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use reg instead of ret for all calls to readreg, remove ret_EA
as it doesn't need to be a separate var anymore.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Probably a remnant of this driver being reverse engineered,
cx24120_init assigned ret on each call to writereg - they're not
used for anything so remove them to clear up the codebase.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove __func__ from calls to dev_dbg as dynamic debug can add in
the function name anyway.
Remove debug call in dvbv3 read_signal_strength as userspace has
this value anyway.
Reword some strings to make them simpler / more obvious.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Better to report CNR via DVBv5 stats, as scale can be used.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Previous version of this driver had a memset before every call
to cmd. This meant the default value of cmd.arg[1] was zero unless
burst is set. Make sure it remains zero.
Also fe_sec_mini_cmd_t is an enum, so test against it.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Algorithm copied from cx24117.c - it seems to work. Showing 95% on
a signal I know to be somewhere around 74dBuV.
[mchehab@osg.samsung.net: merged two patches, to avoid breaking compilation]
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch changes DVBv3 signal strength to read from the cache by
moving the signal strength reading routine into get_stat, and
reducing read_signal_strength to just returning the cached value.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
get_frontend was making a call to read_status, which is being
called periodically anyway. Have read_status store fe_status in
the state struct instead and use that within get_frontend.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Previous patch added in collection, this patch enables them by
signalling they are available.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add new get_stats function, called from read_status, for
collecting DVBv5 stats into the frontend cache. Only signal
strength for now, can add others later.
Not currently marked as available, future patch will enable.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change calculate_vco function to send_vco to tidy up cx24120_init
function.
xxyyzz variable is remnants of a manual div & remainder codepath
to perform a u64 rounded div; replace with kernel macro
DIV_ROUND_CLOSEST_ULL
Hex values provided to the message are mainly variables calculated
within this function, replace with these to remove hardcoding.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
msg.len has been ++'d so msg.len is one too many.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds in a missing command to cx24120_check_cmd. This part
of the old reverse engineered driver was quite hard to follow - it's
presumed the compiler did some neat optimisation that wasn't easy to
decode. This command was checked for in that version but not copied
across to the new switch statement.
For reference, old reverse engineered code:
xxzz = cmd->id - 0x11; // look for specific message id
if ( xxzz <= 0x13 ) {
msg_cmd_mask = 1 << xxzz;
//0x0F8021 // if cmd_id 17 or 22 or 33-36, 42, 47, 57-61 etc. disable mpeg output
if ( msg_cmd_mask & 0x0F8021 ) { // 000011111000000000100001b
cx24120_msg_mpeg_output_global_config(state, 0);
msleep(100);
state->dvb_s2_mode &= 0xFD; // reset mpeg out enable flag
}
}
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch removes the requirement of waiting for tune in
set_frontend by moving the clock set call into read_status
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch changes DVB-S/DVB-S2 to the more commonly used
DVB-S/S2 in the description for DVB_CX24120
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patches fixes all checkpatch-errors.
Even the ones created --strict.
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro pointed out some coding style issues in his review.
This patch fixes them.
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Some i2c-hosts are quite limited regarding maximum
i2c-burst-write-sizes. This patch makes the previously
hardcoded field configurable by users of the driver.
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch fixes printk-related checkpatch warnings. All printks
have been converted to pr_warn or pr_info or pr_err.
Signed-off-by: Patrick.Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch adds support for the Technisat Skystar S2 - this
has been tried before but the cx24120 driver was a bit out of shape
and it didn't got any further:
https://patchwork.linuxtv.org/patch/10575/
It is an old card, but currently being sold off for next to nothing,
so it's proving quite popular of late. Noticing it's quite similar
to the cx24116 and cx24117 I've rewritten the driver in a similar way.
There were a few registers and commands from those drivers
missing from this one I've tested out and found they do something so
they've been added in to speed up tuning and to make get_frontend
return something useful.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick.Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Even though the rcar-vin driver tells userspace that it will give a monotonic
timestamp, it is actually using gettimeofday. Replace this with a proper
monotonic timestamp.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
V4L2 drivers should use MONOTONIC timestamps instead of gettimeofday, which is
affected by daylight savings time.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The intermediate calculation in the expression for hblank can exceed
32 bit signed range. This overflow can lead to negative values for
hblank. Typecasting intermediate variable to higher precision.
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
[hans.verkuil@cisco.com: made the denominator u32, since that's what div_u64 expects]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove code duplication by merging two cases in a switch.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Support for V4L2_PIX_FMT_Y16, a 16 bit greyscale format.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add initial support for fc2580 tuner based devices.
Tuner is controlled via V4L2 subdevice API.
Passes v4l2-compliance tests.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Implement V4L2 subdevice for bandwidth and frequency controls of
SDR usage. That driver now implements both DVB frontend and V4L2
subdevice. Driver itself is I2C driver. Lets see how it works.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Calculate low-pass filter control word dynamically from given radio
channel bandwidth.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
rtl2832 demod driver has support for FC2580 tuner config, no need to
abuse FC0012 settings anymore.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use div_u64() to simplify and remove home made divides.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We are using I2C client binding now, so remove old media attach.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change tua9001 driver from media binding to I2C client binding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change tua9001 driver from media binding to I2C client binding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Driver supports multiple chipset versions. Devices are ordered to
ID table per used chipset type. "ITE 9303 Generic" device uses IT9303
chipset and was added mistakenly between IT9135 IDs.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Replace home made register access routines with regmap.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Rename driver state from priv to dev.
Remove legacy i2c-gate control.
Use I2C client for proper dev_() logging.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Calculate PLL dividers slightly differently, most likely it is now
correct. Move some register values to innitab. Use jiffies to poll
filter lock. Fix logging.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
All users are using driver via I2C client binding so lets remove
unneeded media binding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change fc2580 driver from media binding to I2C client binding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change fc2580 driver from media binding to I2C client binding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
For every frontend entry, we need to add the adapter's size. There
are already two patches fixing it. So, it doesn't seem trivial to
keep it there at the right place.
Also, currently, the indentation is wrong on all places.
So, it seems that keeping it right is not too trivial.
Better to use a macro that would do it for us, at least while
this is not converted to dvb-usb-v2.
Compile-tested only.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Enhances driver to use an MSI interrupt when available.
Adds the module option 'enable_msi' (type bool) which by default is
enabled. Can be set to 'N' to disable.
Fixes (or can reduce the occurrence of) a crash which is most commonly
reported when both digital tuners of the saa7164 chip is in use. A
reported example can be found here:
http://permalink.gmane.org/gmane.linux.drivers.video-input-infrastructure/83948
Reviewed-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The same code is executed if ret is true or false, so this test can
be removed.
Fix Coverity CID 1268782.
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Nuvoton-cir utilizes the encoding capabilities of rc-core to convert
scancodes from user space to pulse/space format understood by the
underlying hardware.
Converted samples are then written to the wakeup fifo along with other
necessary configuration to enable wake up functionality.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add the s_wakeup_filter callback to the rc-loopback driver, which instead of
setting the filter just feeds the scancode back through the input device
so that it can be verified.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support in rc-core for drivers which implement the wakeup scancode
filter by encoding the scancode using the raw IR encoders. This is by
way of rc_dev::encode_wakeup which should be set to true to make the
allowed wakeup protocols the same as the set of raw IR encoders.
As well as updating the sysfs interface to know which wakeup protocols
are allowed for encode_wakeup drivers, also ensure that the IR
decoders/encoders are loaded when an encode_wakeup driver is registered.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add the capability to encode RC-6 and RC-6A scancodes as raw events.
The protocol is chosen based on the specified protocol mask, and
whether all the required bits are set in the scancode mask, and none of
the unused bits are set in the scancode data.
The Manchester modulation helper is used several times with various
timings so that RC-6 header preamble, the header, header trailing bit
and the data itself can be modulated correctly.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: James Hogan <james@albanarts.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add the capability to encode RC-5, RC-5X and RC-5-SZ scancodes as raw
events. The protocol is chosen based on the specified protocol mask,
and whether all the required bits are set in the scancode mask, and
none of the unused bits are set in the scancode data. For example a
scancode filter with bit 16 set in both data and mask is unambiguously
RC-5X.
The Manchester modulation helper is used, and for RC-5X it is used twice
with two sets of timings, the first with a short trailer space for the
space in the middle, and the second with no leader so that it can
continue the space.
The encoding in RC-5-SZ first inserts a pulse and then simply utilizes
the generic Manchester encoder available in rc-core.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Adding a simple Manchester encoder to rc-core.
Manchester coding is used by at least RC-5 and RC-6 protocols and their
variants.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add a callback to raw ir handlers for encoding and modulating a scancode
to a set of raw events. This could be used for transmit, or for
converting a wakeup scancode filter to a form that is more suitable for
raw hardware wake up filters.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Rename state to dev.
Correct some indentations.
Remove FSF address.
Fix some style issues reported by checkpatch.pl.
Correct some style issues I liked.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Update synthesizer calculation to model I prefer nowadays. It is mostly
just renaming some variables, but also minor functionality change how
integer and fractional part are divided (using div_u64_rem()). Also, add
'schematic' of synthesizer following my current understanding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Rename state from s to dev. Rename some other things. Fix indentations.
Disable driver unbind via sysfs.
indentation prevent unload
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Update synthesizer calculation to model I prefer nowadays. It is mostly
just renaming some variables, but also minor functionality change how
integer and fractional part are divided (using div_u64_rem()). Also, add
'schematic' of synthesizer following my current understanding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix an oops during device initialization by correctly setting size_of_priv
instead of leaving it 0.
The regression was introduced by 8abe4a0a3f ("[media] dib7000:
export just one symbol") and only fixed for one type of dib0700 based
devices in 9e334c7564 ("[media] Fix regression in some dib0700
based devices").
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=92301
Fixes: 8abe4a0a3f ("[media] dib7000: export just one symbol")
Cc: stable@vger.kernel.org # for version 3.17+
Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If the streaming_ctrl is called to enable TS before demod has locked
the TS will be empty. Copied the solution from the dvbsky driver for the
TechnoTrend S2-4600 device: when the state changes from unlock to
lock, call su3000_streaming_ctrl again.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
While reading the MAC address for SU3000-based devices the system was
printing excessive debug information in the logs:
Output before the patch:
[ 1515.780692] bc 00 00 00 00 00
[ 1515.781440] bc ea 00 00 00 00
[ 1515.782251] bc ea 2b 00 00 00
[ 1515.783094] bc ea 2b 46 00 00
[ 1515.783816] bc ea 2b 46 12 00
[ 1515.784565] bc ea 2b 46 12 92
[ 1515.784571] dvb-usb: MAC address: bc:ea:2b:46:12:92
Output after the patch:
[ 3803.495706] dvb-usb: MAC address: bc:ea:2b:46:12:92
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
SRVM_MAX_PID_FILTERS was defined in 2 sms_tx_stats structures
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix the 0x0x prefix in integer constants.
In this case a padding 0 must also be inserted to make the constants
look like all the other 16 bits ones.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
My static checker warns that the name of the port can be 15 characters
when you consider the NUL terminator and that's one more than the 14
characters in name[]. Maybe it's an off-by-one?
It's unlikely that we hit the limit and even if we do the overflow will
only affect one of the two bytes of padding so it's harmless. Still
let's fix it and also change the sprintf() to snprintf().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Building for avr32 leads the following build warning:
drivers/media/rc/st_rc.c:270: warning: passing argument 1 of 'IS_ERR' discards qualifiers from pointer target type
drivers/media/rc/st_rc.c:271: warning: passing argument 1 of 'PTR_ERR' discards qualifiers from pointer target type
devm_ioremap_resource() returns void __iomem *, so change 'base' and
'rx_base' definitions accordingly.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Building for avr32 leads the following build warning:
drivers/media/rc/ir-hix5hd2.c:221: warning: passing argument 1 of 'IS_ERR' discards qualifiers from pointer target type
drivers/media/rc/ir-hix5hd2.c:222: warning: passing argument 1 of 'PTR_ERR' discards qualifiers from pointer target type
devm_ioremap_resource() returns void __iomem *, so change 'base' definition
accordingly.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In a rarely hit randconfig case, the r820t tuner driver can
get built when CONFIG_BITREVERSE is not selected by any
other driver, resulting in this error:
drivers/built-in.o: In function `r820t_read.constprop.3':
:(.text+0xa0594): undefined reference to `byte_rev_table'
For consistency, this adds the 'select BITREVERSE' that
all other similar drivers have.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Without i2c, we can get a build error:
drivers/media/platform/exynos4-is/fimc-is-i2c.c: In function 'fimc_is_i2c_probe':
drivers/media/platform/exynos4-is/fimc-is-i2c.c:58:8: error: implicit declaration of function 'i2c_add_adapter' [-Werror=implicit-function-declaration]
The dependency already exists for exynos-fimc-lite and s5p-fimc,
but is missing for exynos4-fimc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Several lines touched by the pr_foo refactoring patches are not
following the Linux Coding style.
While we won't be fixing the style globally at the driver, we should,
at least, fix on the lines we touched.
Basically, this patch add (or remove) whitespaces and blank lines
where needed.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The debug macros are not properly defined, as they generate warnings
like:
ERROR: Macros with complex values should be enclosed in parentheses
+#define core_dbg(fmt, arg...) if (core_debug) \
+ printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg)
Use do { } while (0) for those macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of implement its own hexdump logic, use the printk
format, and convert to use pr_info().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Rename the macros to input_dbg() and ir_dbg(), using pr_fmt()
on both, to be coherent with the other debug macro changes.
The ir_dbg() also prints the IR name.
I'm not sure if it is a good idea to keep both macros here,
but merging them would require tests on different flavors of
saaa7134-based boards.
So, for now, let's keep both.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
rename the macro to vbi_dbg()/video_dbg() and use pr_fmt(),
to be coherent with the other debug macro changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
instead of using dev->name, let's use pr_fmt() like on the
other parts of saa7134. Also, rename the debug macro to
ts_dbg() to match the namespace for the debug macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Converting debug prints to use pr_foo() is not trivial, as the
result will be a way worse than what's provided here, due to the
pieces of the code that prints the I2C transfers. Those use a
lot pr_cont(), and, depending on using either level 1 or 2,
a different set of macros are selected.
So, let's replace d1printk() and d2printk() macros by i2c_dbg()
and i2c_count() adding a debug level there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
On media drivers, debugging messages should be grouped into
categories, as this makes easier to debug the driver.
In the case of saa7134, the core has 2 debug categories, one
for IRQ, and another one for the core itself. The IRQ have
actually 2 levels of debug.
So, instead of using pr_dbg(), where everything would be in
the same box, let's define two macros that use pr_fmt(),
one for the core, and another one for irq.
With that, we can replace the remaining printk() occurrences
at the core to use either core_dbg() or irq_dbg(), depending
on the group of debug macros that need to be enabled.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
On a few places, mostly during board detection, some printk()
macros were called without especifying any message level.
Those are actually warnings. So, use pr_warn() for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As this module doesn't use any debug level, it is easy to
just replace all debug printks by pr_debug().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As this module doesn't use any debug level, it is easy to
just replace all debug printks by pr_debug().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
On saa7134-alsa, there is just one printk macro that use a
different debug level.
It should be easy to enable/disable this one using dynamic_printk,
if one need to individually control it.
So, this module can easily use pr_debug() instead of using its
own macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
On a few places, the search expression used on the script that
replaced pr_info/pr_warn didn't match, because the string were
on the next line.
It is best to manually edit those lines, and re-indent the
paragraphs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Replaces all occurrences of printk with KERN_INFO, KERN_WARNING
and KERN_ERR to pr_info/pr_warning, pr_err, using this small
shell script:
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_INFO ','pr_info(',g <$i >a && mv a $i; done
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_ERR ','pr_err(',g <$i >a && mv a $i; done
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_WARNING ','pr_warn(',g <$i >a && mv a $i; done
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add a pr_fmt macro, and move saa7134.h header to the beginning,
to avoid warnings when using the pr_foo macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
commit af3a4a9bbe ("[media] dib0700: NEC scancode cleanup") cleaned
up the NEC scancode logic but overlooked the RC5 case.
This patch brings the RC5 case in line with the NEC code and makes
the struct self-documenting.
Signed-off-by: David Härdeman <david@hardeman.nu>
Reported-by: David Cimbůrek <david.cimburek@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This driver does not use any PCI IDs, don't include
the pci_ids.h header.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In case of error, the function platform_device_register_data() returns
ERR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
GoTView MasterHD 3 is a DVB-T2/C USB 2.0 tuner.
It's based on the following components:
- USB bridge: RTL2832P (contains also DVB-T demodulator)
- Demodulator: Si2168-A30
- Tuner: Si2148-A20
The demodulator and the tuner will need firmwares. The Si2148 uses Si2158
firmware. Antti has the firmwares available for download:
http://palosaari.fi/linux/v4l-dvb/firmware/
Do note that for DVB-T either of the demodulators can be used. DVB-C and
DVB-T2 are only supported by the Si2168 demodulator. The driver will
register 2 frontends for the same adapter. Frontend 0 will be the RTL2832
demodulator and frontend 1 will be the Si2168 demodulator. The same
tuner is used for both.
As a consequence of the above, it's recommended to use application that
does implement proper DVBv5 support.
For some reason, the old I2C write method sporadically fails. Thus the
need for an option to only use the new I2C write method supported by the
RTL2832.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for I2C read operation without a preceeding write.
While here, change the error code to EOPNOTSUPP in case an
unsupported I2C operation is attempted.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The chips supported by the si2157 driver have two IF outputs (either
pins 12+13 or pins 9+11). Instead of hardcoding the output to be used
add an option to choose which output shall be used.
As this patch changes the default behaviour, the IF interface is
specified in each driver currently using si2157 driver. This is to
keep bisectability.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Return error from si2168_cmd_execute in case the demodulator returns an
error.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change the dvbsky driver to support gapped clock instead of the current
hack.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add a parameter in si2168_config to support gapped clock. This might be
necessary on some devices with higher bitrates.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove dead code, make goto label names more expressive and add a label
in order to call mantis_dvb_exit if mantis_uart_init fails.
Also make sure that mantis_pci_exit is called if we fail the
mantis_stream_control call and that we call mantis_i2c_exit if
mantis_get_mac fails.
[mchehab@osg.samsung.com: fix merge conflict]
Signed-off-by: Silvan Jegen <s.jegen@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
TeVii S482 is a PCIe device with two tuners that actually contains two
USB devices. The devices are visible in the lsusb printout.
Bus 006 Device 002: ID 9022:d483 TeVii Technology Ltd.
Bus 007 Device 002: ID 9022:d484 TeVii Technology Ltd.
The device itself works exactly with the same settings as TechnoTrend
TT-connect S2-4600. Firmware for DS3103 demodulator is required:
http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/
This patch should be applied on top of the TT S2-4600 patch:
https://patchwork.linuxtv.org/patch/28818/
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The RGB444 format swapped the red and blue components, fix this.
Rather than making a new BGR444 format (as I proposed initially), Jon prefers
to just fix this and return the colors in the right order. I think that makes
sense in this case.
Since the RGB444 pixel format is deprecated due to the ambiguous specification
of the alpha component we use the XRGB444 pixel format instead (specified as having
no alpha channel).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of parsing the link-frequencies property in the driver, let
v4l2_of_alloc_parse_endpoint() do it.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
[mchehab@osg.samsung.com: fix a merge conflict at adv7604.c]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Setting the last buffer flag causes the videobuf2 core to return -EPIPE from
DQBUF calls on the capture queue after the last buffer is dequeued.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Setting the last buffer flag causes the videobuf2 core to return -EPIPE from
DQBUF calls on the capture queue after the last buffer is dequeued.
This patch also fixes the EOS event to conform to the specification. It now is
sent right after the last buffer has been decoded instead of when the last
buffer is dequeued.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If the last buffer was dequeued from a capture queue, let poll return
immediately and let DQBUF return -EPIPE to signal there will no more
buffers to dequeue until STREAMOFF.
The driver signals the last buffer by setting the V4L2_BUF_FLAG_LAST.
To reenable dequeuing on the capture queue, the driver must explicitly
call vb2_clear_last_buffer_queued. The last buffer queued flag is
cleared automatically during STREAMOFF.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
[k.debski@samsung.com: Fix misspelling in title (s/sp5/s5p/)]
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVT9fTAAoJEHm+PkMAQRiGrbYH/276n6aKSORO0B6DrEnebu8Y
oxfJeacg90/N5aLx/B5GEplO24uTENaAfB342WkexziXdY+7P02J0Y36eSh5WiL2
qcL+gkiZVaApZIjVeO/y2ByL7nLprPeIsxl5gGLhI+qYYMaQ8gtzxC7sDLnNqjPS
w8WYQB7LdWeGFqcuvySEX2C6Q62aHpZWoSsV3LYdrfoDJz2lv1DJrOpRhqXPagl7
oX1c1CWQ4yWdFf9xm8vaiZw7EskxEnObQm7n7vWlZ0xAhXZ/3a7bPdc+fj2V+nve
xjZV/EhEL0u3ME86bVtcqbO3lgMjivyWHjQglCwG6keS+iIHkL0xMlQabkrFJhw=
=LGDf
-----END PGP SIGNATURE-----
Merge tag 'v4.1-rc3' into patchwork
Linux 4.1-rc3
* tag 'v4.1-rc3': (381 commits)
Linux 4.1-rc3
drm: Zero out invalid vblank timestamp in drm_update_vblank_count.
m32r: make flush_cpumask non-volatile.
mnt: Fix fs_fully_visible to verify the root directory is visible
path_openat(): fix double fput()
namei: d_is_negative() should be checked before ->d_seq validation
ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow
ARM: dts: Fix typo in trip point temperature for exynos5420/5440
ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards
ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420
MAINTAINERS: add Conexant Digicolor machines entry
MAINTAINERS: socfpga: update the git repo for SoCFPGA
drm/tegra: Don't use vblank_disable_immediate on incapable driver.
mmc: dw_mmc: dw_mci_get_cd check MMC_CAP_NONREMOVABLE
mmc: dw_mmc: init desc in dw_mci_idmac_init
ARM: multi_v7_defconfig: Select more FSL SoCs
MAINTAINERS: replace an AT91 maintainer
drivers: CCI: fix used_mask init in validate_group()
drm/radeon: stop trying to suspend UVD sessions
drm/radeon: more strictly validate the UVD codec
...
The Media Controller DVB support is still an experimental feature,
as it is under heavy development. It is already said that it is
an experimental feature at the help, but let make it even clearer
and louder, as we may need to adjust some bits when we start using it
on embedded drivers.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Bellow is yelling. Ok, sometimes the code is yells a lot, but
but this is not the case there ;)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVSIvdAAoJEAhfPr2O5OEVegMQAI53Jv5ls3uauICyh6Cd+KJW
PowBTV041kFefzZf/1QzoJRaGFsXJlkK6ZVv1PsTyfnR02z+2r0dFpTRJHtWK+08
CbbXbWi7wmQXya6mb+c6heWVZa/NAH+DYbDZwrSLUeHgOst13SUMKefLr90kjhBv
ay08WsL3P9fZMwRUOndE57qGkBZ1w+Irp12VYk+Udt8F1ImTxfcJFulazD5DGWO0
JjoYzO1mlRlp7wVkhKfQJd/fjCgHWlFGUV4aH6i6N6nh3RtU5X03eNDmGLiHcn/z
7fHOB2DNtsEDWqmXLpLwdndt9rmFYmV3pk/vjQDaJmNLS+FojUmrPC5xdOe1e2SW
ikzQr5BgIGnvl4n7SIECzutjX9knxuhtGRU1myiRVBDcyVmR2e9+Gx3xTmo9Lg7I
mXbxQx7yZHqpHP9cA6Ih8fCAwqqxysKrRUlfHG0J1/G3iVGbVYTnlSTDeTTkdg5k
2vpAfxbH5iqwCmcvpNSitU2vCNNF8IOOhTI2LvT5OZk9H2cK0YpfWIozK1KSxefT
8X3NQ5Tt+lqOVCdiA81HNZDpm56lVo3YNNalgesrQCQl1bCCo0WEuf+LqjzgMBtA
fRdlYq8KDi9sr6xxfomdD9cuS+SnhTiMpqXTersO8bHEiqKqTOee9IgNsfCr81KI
j/prjUBnL0VgtzmfmbBb
=gmuD
-----END PGP SIGNATURE-----
Merge tag 'media/v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Three driver fixes:
- fix for omap4, fixing a regression due to a subsystem API that got
removed for 4.1 (commit efde234674);
- fix for one of the formats supported by Marvel ccic driver;
- fix rcar_vin driver that, when stopping abnormally, the driver
can't return from wait_for_completion"
* tag 'media/v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] v4l: omap4iss: Replace outdated OMAP4 control pad API with syscon
[media] media: soc_camera: rcar_vin: Fix wait_for_completion
[media] marvell-ccic: fix Y'CbCr ordering
drivers/media/pci/saa7164/saa7164-dvb.c: In function ‘saa7164_dvb_register’:
drivers/media/pci/saa7164/saa7164-dvb.c:701:7: warning: ‘client_tuner’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (!client_tuner || !client_tuner->dev.driver)
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Replace all calls to s_mbus_fmt in bridge drivers by calls to the
set_fmt pad op.
Remove the old try/s_mbus_fmt video ops since they are now no longer used.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Replace all calls to try_mbus_fmt in bridge drivers by calls to the
set_fmt pad op.
[mchehab@osg.samsung.com: fix a merge conflict at mcam-core.c]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The s_mbus_fmt video op is a duplicate of the pad op. Replace all uses
in sub-devices by the set_fmt() pad op.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The try_mbus_fmt video op is a duplicate of the pad op. Replace all uses
in sub-devices by the set_fmt() pad op.
Since try_mbus_fmt and s_mbus_fmt both map to the set_fmt pad op (but
with a different 'which' argument), this patch will replace both
try_mbus_fmt and s_mbus_fmt by set_fmt.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The g_mbus_fmt video op is a duplicate of the pad op. Replace all uses
by the get_fmt pad op and remove the video op.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Replace all calls to the enum_mbus_fmt video op by the pad
enum_mbus_code op and remove the duplicate video op.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kamil Debski <k.debski@samsung.com>
Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are a few lines longer than 80 cols for no good reason.
Fix them sooner than latter, making checkpatch.pl happy.
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Ensure that buffers are allocated from the DMA32 zone since this
device only handles 32 bit DMA addresses.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The dt3155 code is now in good shape, so move it out of staging into
drivers/media/pci. Mark in MAINTAINERS that I'll do Odd Fixes for this
driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If i2c_add_adapter() fails, adap is not deallocated.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The REG_CTRL0 register was never written if this format was selected,
instead an error was logged and whatever was last set in that register
was used.
Surprisingly, that seems to work if YUYV was selected, but we should
program this register explicitly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
I cannot get this format to work, the colors keep coming out wrong.
Since this has never worked I just drop support for this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
These were calculated incorrectly for the planar formats.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Even though the format is Y'CbCr, the colorspace used by the sensor
is almost certainly SRGB. The sensor is also not generating JPEG data,
so it makes no sense to use V4L2_COLORSPACE_JPEG here.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This driver appeared to support the JPEG format when in reality
that was just dead code. Remove it.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The dma-vmalloc implementation didn't support planar formats, but with
a little bit of refactoring that is easy to fix.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If start_streaming fails or stop_streaming is called, then all queued
buffers need to be given back to vb2.
This prevents vb2 from calling WARN_ON when it detects that this is not
done correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
- fill in timestamp
- fill in field
- start the sequence counter at 0, not 1
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add VB2_DMABUF and VIDIOC_EXPBUF support. Also add VB2_USERPTR support
for the vmalloc DMA mode which was missing for no good reason.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This fixes the final v4l2-compliance warning.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use the V4L2 core locking system instead of rolling your own. Switch to
the vb2 fop and ioctl helpers to get rid of a lot of code. This also made
it easy to add VB2_READ to the DMA modes, since you get read() for free
with vb2 and these helpers.
Finally remove the users field: this information is also available from
the core framework, no need to keep track of it in the driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Now that this driver uses v4l2_fh, it is trivial to add support for
control events. Again, this fixes a v4l2-compliance failure.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use struct v4l2_fh to represent a filehandle. This fixes the missing
g/s_priority handling of this driver that v4l2-compliance complained
about.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
No controls were reported, even though the ov7670 does have controls.
Two reasons for this: the v4l2_ctrl_handler_init() call must come
before the ov7670 is loaded (otherwise the ov7670 won't know that
its controls should be added to the bridge driver), and the
v4l2_ctrl_handler_free() call at the end should only be called if
the ret value is non-zero (otherwise you would just free all the
controls that were just added).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The colorspace field wasn't filled in properly. This fixes a v4l2-compliance
failure.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The width and height should be checked in the enum_frame_interval
op. This fixes a v4l2-compliance failure.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
TV standards make no sense for webcam drivers, so drop these dummy
functions. This stops v4l2-compliance from complaining about this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The bus_info field of struct v4l2_querycap wasn't filled in and
v4l2-compliance complained about that. Fix this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We must set timestamp_flags in vb2_queue otherwise vb2 will complain
loudly about it.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Running v4l2-compliance on my usbtv stick revealed two failures:
1) Correct handling of CREATE_BUFS in usbtv_queue_setup was missing. Added this.
2) The sequence counter wasn't reset to 0 when starting streaming.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The patches that added support for HVR2255 and HVR2205 added
some CodingStyle issues.
Better to fix it sooner than latter.
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix the VIDIOC_QUERYCAP warning due to the missing device_caps. Don't fill
in the version field, the V4L2 core will do that for you.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v3.19 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
QAM mode in the LGDT3306 auto detects inversion. VSB does not.
Forgot to include tis fact in the original patch set.
Tested with QAM and VSB after this patch, working fine.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Updates the copyright notes at the saa7164 driver.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Adding support for the Hauppauge HVR2255 and Hauppauge HVR2205
PCIe cards. Digital TV for DVB-T and ATSC/US-Cable is known to
work. Support for analog RF tuners does not work due to
a lack of analog support in the upstream SI2157 driver.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
SI2168/SI2157 issue single byte address reads. Add support
for these.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This needs to be signed or there is a risk of hitting a forever loop.
Fixes: c4c0283ab3 ('[media] media: i2c: add support for omnivision's ov2659 sensor')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently vb2 core acquires mmap_sem just around call to
__qbuf_userptr(). However since commit f035eb4e97 (videobuf2: fix
lockdep warning) it isn't necessary to acquire it so early as we no
longer have to drop queue mutex before acquiring mmap_sem. So push
acquisition of mmap_sem down into .get_userptr and .put_userptr memops
so that the semaphore is acquired for a shorter time and it is clearer
what it is needed for.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This change will not change timing calculation. In CVT generator
spreadsheet the nominal value of hsync (as a percentage of line)
is 8 percent.
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wrong values of hfreq and image height can lead to strange timings.
Avoid timing calculations for such values.
Suggested By: Martin Bugge <marbugge@cisco.com>
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Changed the rounding calculation for hblank and hsync to match it
to equations in cvt and gtf standards.
In cvt calculation, hsync needs to be rounded down.
In gtf calculations, hblank needs to be rounded to nearest multiple
of twice the cell granularity and hsync needs to be rounded to the
nearest multiple of cell granularity.
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Changed the rounding offsets used in vsync_bp calculation in cvt and
gtf timings. The results for vsync_bp should now match with results
from timing generator spreadsheets for cvt and gtf standards.
In the vsync_bp calculation for cvt, always round down the value of
(CVT_MIN_VSYNC_BP / h_period_est) and then add 1. It thus, reflects
the equation used in timing generator spreadsheet. Using 1999999 as
rounding offset, could pontentially lead to bumping up the vsync_bp
value by extra 1.
In the vsync_bp calculations for gtf, instead of round up or round
down, round the (CVT_MIN_VSYNC_BP / h_period_est) to the nearest
integer.
Thanks to Martin Bugge <marbugge@cisco.com> for validating with
standards and suggestions on equations.
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If NO_DMA=y:
ERROR: "dma_unmap_sg" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
ERROR: "dma_map_sg" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
ERROR: "dma_sync_sg_for_cpu" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
VIDEOBUF2_DMA_SG cannot be enabled manually by the user, it's always
selected automatically by drivers that need it. Several of those drivers
already have an explicit dependency on HAS_DMA.
Make VIDEOBUF2_DMA_SG depend on HAS_DMA. This makes it easier to find
drivers that select VIDEOBUF2_DMA_SG without depending on HAS_DMA, as
Kconfig will give a warning.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If NO_DMA=y:
warning: (VIDEO_XILINX && VIDEO_DM365_VPFE && VIDEO_DT3155 && VIDEO_OMAP4) selects VIDEOBUF2_DMA_CONTIG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA)
media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_mmap’:
media/v4l2-core/videobuf2-dma-contig.c:207: error: implicit declaration of function ‘dma_mmap_coherent’
media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_get_base_sgt’:
media/v4l2-core/videobuf2-dma-contig.c:390: error: implicit declaration of function ‘dma_get_sgtable’
VIDEO_XILINX selects VIDEOBUF2_DMA_CONTIG, which bypasses its dependency
on HAS_DMA. Make VIDEO_XILINX depend on HAS_DMA to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix several typos inside the driver's comments.
Signed-off-by: Cheolhyun Park <pch851130@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
All masks for timings are different between ADV7604 and ADV7611.
Most of the values have 1 precision bit more in the latter.
Fix this by adding new fields to the chip_info structure.
Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Return a negative error code on failure.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Return a negative error code on failure.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Return a negative error code on failure.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If pci_disable_device() isn't called when the driver is removed, then
the next time when it is loaded the irq isn't found.
I'm pretty sure this used to work in the past, but calling
pci_disable_device() is clearly the correct method and this makes
it work again.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix three v4l2-compliance failures:
- the colorspace wasn't set in vidioc_try_fmt_vid_cap().
- the field wasn't set in v4l2_buffer when vb2_buffer_done() was called.
- the sequence wasn't set in v4l2_buffer when vb2_buffer_done() was called.
This fix also removes the unused buf->count field and starts the count
at 0 instead of 1.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The format description is now filled in by the core, so we can
drop this in this virtual driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
